Model No. WLAW55072
Serial No.
Write the serial number in the space
above for future reference.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
Patent Pending
CAUTION
Read all precautions and in-
structions in this manual before
using this equipment. Save this
manual for future reference.
USER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the AIR STRIDER.
1. It is the responsibility of the owner to ensure
that all users of the AIR STRIDER are
adequately informed of all warnings and
precautions.
9. Keep hands and feet away from moving parts.
10. Do not wear loose clothing that could
become caught on the AIR STRIDER.
2. Read all instructions in this manual before
using the AIR STRIDER.
11. Always wear athletic shoes for foot protec-
tion when exercising on the AIR STRIDER.
3. Use the AIR STRIDER only as described in
this manual.
12. When you are getting onto and off the AIR
STRIDER, tighten the resistance dials, hold
the handles firmly, and be sure that your
body weight is centered directly over the
pedals.
4. Use the AIR STRIDER only on a level surface.
Cover the floor beneath the AIR STRIDER to
protect the floor or carpet.
13. If you feel faint, dizzy, or short of breath while
exercising, stop immediately and begin cool-
ing down.
5. Be sure that there are no persons or obsta-
cles in front of or behind the AIR STRIDER.
6. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
14. When folding the AIR STRIDER for storage,
hold the resistance dials to prevent your
hands from being pinched.
7. Keep children and pets away from the AIR
STRIDER at all times.
15. The AIR STRIDER is intended for home use
only. Do not use the AIR STRIDER in any
commercial, rental, or institutional setting.
8. The AIR STRIDER should not be used by per-
sons weighing more than 250 pounds.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. ICON assumes no responsibility for personal injury or property damage
sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the innovative WESLO¨ AIR
STRIDER. The AIR STRIDER blends advanced engi-
neering with contemporary styling to provide you with
a no-impact, total body workout in the convenience
and privacy of your own home.
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is WLAW55072. The
serial number can be found on a decal attached to the
AIR STRIDER (see the front cover of this manual for
the location of the decal).
For your benefit, read this manual carefully before
using the AIR STRIDER. If you have questions after
reading the manual, call our Customer Service
Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Handle
Electronic Monitor
Lock Knob
Resistance Dial
Hip Pad
Frame
Upright
Link Arm
Leg
Pedal
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two people. Place all parts of the AIR STRIDER in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Read through all steps before beginning assembly. As you assemble the AIR STRIDER, make sure that all parts
are oriented as shown in the drawings. Tighten all parts as you assemble them, unless instructed to do other-
wise. Refer to the drawings below to identify the small hardware used in assembly. Note: If a part is not found
in the parts bag, check to see if it has been pre-attached.
Assembly requires two adjustable wrenches
phillips screwdriver (not included).
, a rubber mallet
, and a
Lock Washer (52)Ñ1
3/8Ó Bushing (16)Ñ8
3/8" Axle Cap (40)Ñ4
M10 Flat Washer (39)Ñ4
Plastic Spacer (41)Ñ2
Tree Fastener (32)Ñ2
M10 Nylon Locknut (43)Ñ2
M5 x 16mm Screw (23)Ñ10
M10 x 102mm Screw (44)Ñ4
M10 x 138mm Bolt (42)Ñ2
1. Read all instructions at the top of this page
before you begin assembly.
Fig. 1
Stop
Rods
Refer to the drawing at the right and identify the
Left and Right Uprights (1, 2). Note the location of
the stop rods.
2
Turn the Crossbar (10) so the Rocker Arm (9) is at
the top. Attach the Crossbar to the Left Upright (1)
with two M10 x 102mm Screws (44) and two M10
Flat Washers (39). Do not tighten the Screws
yet. Attach the Crossbar to the Right Upright (2) in
the same manner.
9
10
1
39
44
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Refer to figure 2b. Slide a Finger Guard (54) onto
the Hex Bushing (33) and the pin on the Left Pivot
Bracket (7). Note: The Finger Guard may already
be attached.
Fig. 2a
7
Pin
Refer to figure 2a. Find the Left Link Arm (11),
which is labeled with a sticker. Make sure that there
are two 3/8Ó Bushings (16) in each end of the Link
Arm. Using a rubber mallet, tap one end of the Link
Arm onto the pin on the Left Pivot Bracket (7).
Make sure that the Link Arm is turned as shown
in figure 2c. Tap a 3/8Ó Axle Cap (40) onto the pin.
16
11
40
3
Fig. 2b
7
9
54
Pin
33
Tap the other end of the Left Link Arm (11) onto the
pin on the Rocker Arm (9). This will be a tight fit.
(Note: If necessary, pivot the Rocker Arm and the
Left Leg [3].) Tap a 3/8Ó Axle Cap (40) onto the pin.
Fig. 2c
Long
Side
Attach the other Finger Guard and the Right Link
Arm in the same manner (not shown).
Pin
16
Pin 7
40
11
3. Rest the Right Frame Section (6) on the floor and
hold it in the position shown.
Fig. 3
5
Slide the Hip Pad (28) onto the Left Frame
Section (5). Slide the Left Frame Section onto the
Right Frame Section (6). Make sure to slide
both ends on at the same time. Use the rubber
mallet, if necessary, to make sure that the Left
Frame Section is fully seated on the Right Frame
Section.
23
28
Tighten two M5 x 16mm Screws (23) into the Left
and Right Frame Sections (5, 6).
23
6
Slide the Hip Pad (28) so it is centered on the Left
and Right Frame Sections (5, 6).
4. Refer to figure 4a. Position the Left and Right
Frame Sections (5, 6) around the Left and Right
Uprights (1, 2) as shown. Note: It will be neces-
sary to turn the Frame Sections at an angle in
order to slide them over the Uprights.
Fig. 4a
6
2
Refer to figure 4b. Attach the Left Frame Section
(5) to the Left Upright (1) with an M10 x 138mm
Bolt (42), a Plastic Spacer (41), and an M10
Nylon Locknut (43). Do not tighten the Nylon
Locknut yet. Attach the Right Frame Section (6)
to the Right Upright (2) in the same manner.
5
Fig. 4b
5
6
1
43
2
Tighten all parts used in steps 1 and 4.
42
1
41
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Turn the Pedal Covers (27) upside-down. Remove
the paper backing from the adhesive strips on the
bottoms of the Pedal Covers.
Fig. 5
27
27
Center one Pedal Cover (27) on the lower end of
the Left Leg (3). Press the Pedal Cover firmly into
place.
Attach the other Pedal Cover (27) to the lower
end of the Right Leg (4) in the same manner.
4
3
6. Note: Your Electronic Monitor (37) may look
different from the one shown in this manual, but
operates in exactly the same way. If your Monitor
has a battery cover (see figure 6), install batteries
as described in this step. If your Monitor does not
have a battery cover, see step 7 to install batteries.
Note: Two ÒAAÓ batteries (not included) are
Fig. 6
Note: Your
Monitor may
look different
from the one
shown in this
manual, but
operates in
exactly the
37
required. Alkaline batteries are recommended.
Press the tab on the battery cover and remove the
battery cover. Insert two batteries into the Elec-
tronic Monitor (37). Make sure that the batteries
are turned as shown. Replace the battery cover.
same way.
Battery Cover
Fig. 7b
7. Refer to figure 7a. Remove the two M4 x 16mm
Screws (48) from the monitor bracket and the
Electronic Monitor (37). Lift the Monitor off the
monitor bracket. Be careful not to pull the wire.
Fig. 7a
Refer to figure 7b. Insert two batteries into the
back of the Electronic Monitor (37). Make sure
that the batteries are turned as shown.
37
48
Refer to figure 7a. Reattach the Electronic Monitor
(37) to the monitor bracket with the two M4 x
16mm Screws (48).
Wire
37
Monitor
Bracket
8. Remove the two indicated M4 x 16mm Screws
(48) from the Right Upright (2). Attach the monitor
bracket to the Right Upright with the two Screws.
Note: If the Electronic Monitor (37) does not
operate properly, see HOW TO ADJUST THE
REED SWITCH on page 11.
Fig. 8
37
48
Monitor Bracket
2
7
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Slide one of the Handles (13) onto the Left Leg (3).
Attach the Handle with four M5 x 16mm Screws
(23).
Fig. 9
13
Attach the other Handle (13) to the Right Leg (4) in
the same manner.
13
23
23
4
3
10.Attach the Right Leg Cover (31) to the Right Leg
(4) with a Tree Fastener (32).
Fig. 10
8
Attach the Left Leg Cover (30) to the Left Leg (3)
in the same manner.
31
Slide the Lock Washer (52) onto the Lock Knob
(25). Insert the Lock Knob into the hole near the
top of the Right Leg (4). Tighten the Lock Knob
into the Right Pivot Bracket (8).
32
30
52
4
25
3
11. Before you use the AIR STRIDER, firmly retighten all of the parts used in assembly. Note: Extra M5 x
16mm Screws (23) may be included.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE AIR STRIDER
longer, the time mode will pause until you resume.
CAUTION: When you are getting onto and off
the AIR STRIDER, always tighten the resis-
tance dials, hold the handles firmly, and be
sure that your body weight is centered
directly over the pedals.
DistanceÑDisplays the total number of repetitions
you have completed, up to Ò999.Ó The display will then
reset to Ò0Ó and continue counting.
CaloriesÑDisplays the approximate number of
Calories you have burned. Note: If the resistance is
near the highest or lowest setting, the actual number
of Calories you have burned will be slightly higher or
lower than the number displayed.
EXERCISING ON THE AIR STRIDER
Make sure that the lock knob is tightened into the right
leg and pivot bracket (see assembly step 10 on page 8).
Tighten the resistance dials, hold the handles, and step
onto the pedals. The proper form for exercising on the
AIR STRIDER is similar to the motion of walkingÑmove
one leg forward as you move the other leg back.
ScanÑDisplays the speed, time, distance, and calo-
ries modes, for approximately 5 seconds each, in a
repeating cycle.
DIAGRAM OF THE ELECTRONIC MONITOR
For a full body workout, hold the handles as you walk,
and move your arms and legs in motion with the han-
dles and pedals. To vary the effect of the exercise on
your muscles, change your stance on the AIR
STRIDER. For example, stand erect or lean against
the hip pad, change the position of your hands on the
handles, or bend your legs slightly instead of keeping
them straight.
The AIR STRIDER has one of the monitors shown
below. Both monitors operate in exactly the same way.
A
1
2
For a lower body workout, rest your hands on the
frame for balance as you move the pedals.
RESISTANCE ADJUSTMENT
To vary the intensity
of your workout, the
resistance of the AIR
STRIDER can be
changed. The resis-
tance is controlled
with the resistance
Resistance
Dial
3
1
4
B
dials. To increase the
resistance, turn both
dials clockwise. To
decrease the resis-
tance, turn both dials counterclockwise.
2
4
3
ELECTRONIC MONITOR MODES
The simple-to-operate electronic monitor offers
five different modes to provide instant exercise
feedback. The five modes are described below:
1. LCD displayÑDisplays all modes.
SpeedÑDisplays the number of repetitions you are
performing per minute.
2. Mode indicatorsÑShow which mode is selected.
3. Mode buttonÑSelects all modes.
TimeÑDisplays the length of time you have exer-
cised. Note: If you stop exercising for ten seconds or
4. On/Reset buttonÑTurns the power on and resets
all modes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE ELECTRONIC MONITOR
Speed, time, distance, or calories modeÑ
These modes can be individually selected by
repeatedly pressing the mode button. The mode
indicators will show which mode has been select-
ed. (Make sure that the scan mode is not select-
ed.) The modes will be selected in the following
order: speed, time, distance, calories, scan.
Note: If there is a thin piece of clear plastic on the
face of the electronic monitor, remove it before
operating the monitor.
1. To turn on the power, press the on/reset button or
simply begin exercising on the AIR STRIDER. The
entire display will appear for two seconds. The
electronic monitor will then be ready for operation.
3. The monitor has an auto-off feature to turn off
the power. If the pedals are not moved and the
monitor buttons are not pressed for four minutes,
the power will turn off automatically in order to
conserve the batteries.
2. Select one of the five modes:
Scan modeÑWhen the power is turned on, the
scan mode will be selected automatically. The
scan mode can also be selected by repeatedly
pressing the mode button. One mode indicator will
show that the scan mode has been selected, and
a second mode indicator will show which mode is
currently displayed.
To reset the LCD display, press the on/reset button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE AND TROUBLE-SHOOTING
Inspect and tighten all parts of the AIR STRIDER reg-
ularly. Replace any worn parts immediately. The AIR
STRIDER can be cleaned with a soft, damp cloth.
Keep liquids away from the electronic monitor. Keep
the monitor out of direct sunlight or the display may
be damaged. Remove the batteries when storing the
AIR STRIDER.
REPLACING THE BATTERIES
If the display of the electronic monitor becomes dim,
or if the monitor does not function properly, the
batteries should be replaced. To replace the batteries,
refer to assembly step 6 or 7 on page 7.
HOW TO ADJUST THE REED SWITCH
HOW TO FOLD THE AIR STRIDER FOR STORAGE
If the speed and distance modes do not display cor-
rect information, the reed switch should be adjusted.
The reed switch is
located below the
electronic monitor
When the AIR STRIDER is not in use, it can be folded
for compact storage. To fold the AIR STRIDER, first
remove the lock knob and lock washer from the right
leg. Next, hold the resistance dials and fold the frame
and the uprights together. Place the AIR STRIDER in
a location where it cannot fall.
(see the drawing at
the right). Loosen the
screw in the reed
Magnet
switch, move the reed
switch to the side
slightly, and retighten
the screw. Make sure
that the reed switch
does not hit the
indicated magnet when the AIR STRIDER is in
use. Repeat until the speed and distance modes
display correct information.
Lock
Reed
Switch
Resistance
Knob
Washer
Lock
Knob
Upright
Frame
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
The following general guidelines will help you to plan
your exercise program. Remember that proper nutri-
tion and adequate rest are essential for successful
results.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy. If
your goal is to burn fat, adjust your pace or the resis-
tance until your heart rate is near the lowest number
in your training zone as you exercise.
WARNING: Before beginning this or any exercise
program, consult your physician. This is espe-
cially important for individuals over the age of 35
or individuals with pre-existing health problems.
For maximum fat burning, adjust your pace or the
resistance until your heart rate is near the middle
number in your training zone as you exercise.
EXERCISE INTENSITY
Aerobic Exercise
Whether your goal is to burn fat or strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat burn-
ing, and cardiovascular (aerobic) exercise. (This chart
is also found on the console.)
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust your pace or the resistance until your heart rate
is near the highest number in your training zone as
you exercise.
HOW TO MEASURE YOUR HEART RATE
To measure your heart rate, first exercise for at least
four minutes.
Then, stop exer-
cising and place
two fingers on
your wrist as
shown. Take a
six-second heart-
beat count, and
multiply the result
by 10 to find your
heart rate. For
example, if your
Note: The chart on your electronic monitor may
look different from the chart above. Both charts
have exactly the same information.
six-second heartbeat count is 14, your heart rate is
140 beats per minute. (A six-second count is used
because your heart rate will drop rapidly when you
stop exercising.) Adjust the intensity of your exercise
until your heart rate is at the desired level. You can
adjust the intensity of your exercise by changing your
pace or by adjusting the resistance.
To find the proper heart rate for you, first find your age
on either side of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers to the
side of your age. The three numbers are your Òtraining
zone.Ó The lowest number is the recommended heart
rate for fat burning; the middle number is the recom-
mended heart rate for maximum fat burning; the high-
est number is the recommended heart rate for aerobic
exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases the
body temperature, heart rate, and circulation in prepa-
ration for strenuous exercise.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired.
A cool-down, with 5 to 10 minutes of stretching.
Thorough stretching helps to offset problems caused
when you stop exercising suddenly. Stretching for
increased flexibility is also most effective after exercis-
ing. A proper cool-down should leave you relaxed and
comfortably tired.
Remember, the key to success is make exercise a
regular and enjoyable part of your everyday life.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown in the
drawings below. Move slowly as you stretchÑnever bounce.
1
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean for-
ward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees out-
ward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LISTÑModel No. WLAW55072
R0497A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
8
2
4
4
2
4
2
12
2
1
1
2
Left Upright
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
#
1
2
1
1
2
2
2
2
1
1
1
4
4
2
2
2
4
2
2
2
6
2
2
1
1
2
1
Hip Pad
Right Upright
Left Leg
Right Leg
Left Frame Section
Right Frame Section
Left Pivot Bracket
Right Pivot Bracket
Rocker Arm
Frame Endcap
Left Leg Cover
Right Leg Cover
Tree Fastener
Hex Bushing
Hub Resistance Bushing
Rocker Arm Endcap
Large Axle Cap
Electronic Monitor
Magnet
M10 Flat Washer
3/8Ó Axle Cap
Plastic Spacer
M10 x 138mm Bolt
M10 Nylon Locknut
M10 x 102mm Screw
1Ó x 1 3/4Ó Washer
Frame End Plate
Phoenix Ring
M4 x 16mm Screw
Thrust Bearing
Finger Guard
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Crossbar
Left Link Arm
Right Link Arm
Handle
Resistance Dial
Friction Disk w/Spacer Plate
3/8Ó Bushing
Friction Cup
Thrust Washer
Tension Washer
Snap Ring
Push Nut
Rubber Foot
M5 x 16mm Screw
Handgrip
Lock Knob
Pivot Screw
Pedal Cover
Weld Spacer
Lock Washer
Rocker Arm Bushing
UserÕs Manual (not illustrated)
Note: Extra M5 x 16mm Screws (23) and 3/8Ó Axle Caps (40) may be included. Specifications are subject to
change without notice. See the back cover of this manual for information about ordering replacement parts.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWINGÑModel No. WLAW55072
R0497A
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre-
pared to give the following information when calling:
¥ The MODEL NUMBER of the product (WLAW55072).
¥ The NAME of the product (WESLO¨ AIR STRIDER).
¥ The SERIAL NUMBER of the product (see the front cover of this manual).
¥ The KEY NUMBER and DESCRIPTION of the part(s) from page 14 of this manual.
WESLO is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service cen-
ters with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase.
All returns must be pre-authorized by ICON. This warranty does not extend to any product or damage to
a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center, to products used for commercial or rental pur-
poses, or to products used as store displays. No other warranty beyond that specifically set forth above
is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 137566 G00766AC R0497A
Printed in China © 1997 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|