Model No. 831.15715.0
Serial No.
WEIGHT BENCH EXERCISER
User’s Manual
Write the serial number in the
space above for future reference.
Serial Number Decal
(under the seat)
• Assembly
• Adjustment
• Part List and Drawing
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
al for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your weight bench before using your weight bench.
Sears assumes no responsibility for personal injury or property damage sustained by or through the
use of the weight bench.
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over the age of 35 or per-
sons with pre-existing health problems.
7. Make sure that the pin and the knobs are fully
engaged before the weight bench is used.
8. Keep children under 12 and pets away from
the weight bench at all times.
2. Use the weight bench only as described in
this manual.
9. Wear appropriate clothes while exercising.
Always wear athletic shoes for foot protec-
tion while exercising.
3. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
10. The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg) and
a maximum total weight of 610 lbs. (277 kg).
Do not use the weight bench with more than
310 lbs. (141 kg) of weight. Do not place more
than 150 lbs. (68 kg) on the leg lever. Note:
The weight bench does not include weights.
4. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
5. Keep the weight bench indoors, away from
moisture and dust. Place the weight bench on
a level surface, with a mat beneath it to pro-
tect the floor or carpet. Make sure that there is
enough clearance around the weight bench to
mount, dismount, and use it.
11. If you feel pain or dizziness while exercising,
stop immediately and cool down.
6. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER® CORE
reading this manual, call 1-800-4-MY-HOME® (1-800-
600 weight bench. The weight bench offers a selection 469-4663). To help us assist you, please note the
of exercise stations designed to develop the major
muscle groups of the body. Whether your goal is to
tone your body, build dramatic muscle size and
strength, or improve your cardiovascular system, the
weight bench will help you to achieve the specific
results you want.
product model number and serial number before call-
ing. The model number and the location of the serial
number decal can be found on on the front cover of
this manual.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
ASSEMBLED DIMENSIONS:
Height: 65 in. (165 cm)
Width: 50 in. (127 cm)
Depth: 73 in. (185 cm)
Weight Rest
Safety Spotter
Backrest
Adjustment Knob
Backrest Post
Curl Pad
Curl Bar
Pin
Seat
Weight Tube
Leg Lever
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may
have been preattached. If a part is not in the parts bag, check to see if it has been preattached. If a part
is missing, call 1-877-992-5999.
M4 x 19mm
M5 x 19mm
Screw (54)
M6 x 20mm
Screw (53)
Screw (52)
M10 Washer (55)
M6 x 40mm Screw (51)
M8 x 70mm Bolt (46)
M8 Washer (49)
M6 Washer (32)
M6 x 80mm Screw (48)
M10 x 85mm Bolt (44)
M10 x 90mm Carriage Bolt (43)
M10 Nylon
Locknut (42)
M10 x 90mm Bolt (45)
M8 Nylon
Locknut (36)
M10 x 77mm Bolt Set (47)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Assembly requires the included hex key(s)
and the following tools (not included):
Before beginning assembly, carefully read the
following information and instructions:
two adjustable wrenches
one rubber mallet
• Assembly requires two persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1.
1
Before beginning assembly, make sure
that you have read and understand the
information in the box above. See the
PART IDENTIFICATION CHART on page 5
for help identifying small parts.
4
42
42
2
Orient the Front Stabilizer (2) so that the square
holes are toward the floor. Attach the Front
Stabilizer to the Front Leg (4) with two M10 x
90mm Carriage Bolts (43) and two M10 Nylon
Locknuts (42). Do not tighten the Nylon
Locknuts yet.
Square
Holes
43
2. Orient the Rear Stabilizer (3) so that the square
holes are on the side shown. Attach the Rear
Stabilizer to the Frame (1) with two M10 x
90mm Carriage Bolts (43) and two M10 Nylon
Locknuts (42). Do not tighten the Nylon
Locknuts yet.
2
Square
Holes
3
42
43
1
42
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Attach the Seat (18) and the Seat Bracket (38)
to the Frame (1) with two M6 x 80mm Screws
(48) and two M6 Washers (32).
3
18
38
1
32
48
32
48
4. Attach the Front Leg (4) to the Frame (1) with
two M10 x 85mm Bolts (44), two M10 Washers
(55), and an M10 Nylon Locknut (42).
4
See steps 1 and 2. Tighten the M10 Nylon
Locknuts (42).
1
4
42
55
44
5. Apply a portion of the included grease to an
M10 x 165mm Bolt (50). Attach the Backrest
Post (15) to the Backrest Frames (16) with the
Bolt, two M10 Washers (55), and an M10 Nylon
Locknut (42). Do not tighten the Nylon
Locknut yet.
5
19
32
51
55
Attach the Backrest (19) to the Backrest
Frames (16) with four M6 x 40mm Screws (51)
and four M6 Washers (32). Do not tighten the
Screws yet.
55
42
16
Grease
50
51
32
15
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Apply a portion of the included grease to an
M10 x 165mm Bolt (50). Attach the Backrest
Frames (16) to the Frame (1) with the Bolt, two
M10 Washers (55), and an M10 Nylon Locknut
(42). Set the end of the Backrest Post (15) in
one of the slots in the Frame. Do not over-
tighten the Nylon Locknut; the Backrest
Frames must pivot easily.
6
42
55
16
15
See step 5. Tighten the M10 Nylon Locknut
(42) and the four M6 x 40mm Screws (51). Do
not overtighten the Nylon Locknut; the
Backrest Post (15) must pivot easily.
55
Grease
50
1
Slot
7. Attach the Weight Tube (24) to the Leg Lever
(5) with an M8 x 70mm Bolt (46), a Weight
Tube Spacer (41), two M8 Washers (49), and
an M8 Nylon Locknut (36). Then, press a 25mm
Round Outer Cap (29) onto the Weight Tube.
7
Bracket
47
Grease
36
49
Apply grease to the barrel of an M10 x 77mm
Bolt Set (47). Attach the Leg Lever (5) to the
Front Leg (4) with the Bolt Set. Make sure that
the barrel of the Bolt Set is inserted through
both sides of the bracket on the Front Leg.
4
29
5
47
41
24
49
46
8. Insert the Long Pad Tube (56) into the bracket
on the Front Leg (4). Slide two Foam Pads (22)
onto the Pad Tube, and then press two Pad
Caps (23) into the Foam Pads.
8
23
56
22
4
Repeat this step with the two Short Pad
Tubes (21) and the Leg Lever (5).
21
Bracket
22
5
23
21
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Attach the Bumper (39) to the Curl Bar (17)
with an M4 x 19mm Screw (54).
9
Attach the Curl Bar (17) to the Leg Lever (5)
with the Pin/Tether (35). Then, attach the Tether
to the Leg Lever with an M4 x 19mm Screw
(54).
17
39
54
5
54
35
10. Attach the Curl Pad (20) to the Curl Post (6)
with two M6 x 20mm Screws (53).
10
20
6
53
11. Identify the Left Upright (11) by observing the
positions of the indicated holes. Orient one of
the Bases (9) as shown. Attach the Base to the
Left Upright with two M10 x 90mm Carriage
Bolts (43) and two M10 Nylon Locknuts (42).
11
Attach the Right Upright (10) to the other
Base (9) in the same way.
10
11
Holes
42
9
Holes
42
9
Warning
Decals
43
9
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Attach a Connector (28) to the Left Upright (11)
with two M5 x 19mm Screws (52), two M10 x
90mm Bolts (45), and two M10 Washers (55).
Do not tighten the Screws yet.
12
10
Attach the other Connector (28) to the Right
Upright (10) in the same way.
28
28
52
11
55
45
13. Note: If you have Olympic weights, use the
longer Olympic Extension (8) for this step; if
you have standard weights, use the shorter
Standard Extension (7).
13
45
28
8
55
42
Attach the Olympic Extension (8) or the
Standard Extension (7) to the Connector (28)
on the Left Upright (11) with three M10 x 90mm
Bolts (45), four M10 Washers (55), and three
M10 Nylon Locknuts (42).
55
45
42
28
Attach the Olympic Extension (8) or the
Standard Extension (7) to the other
Connector (28) in the same way.
7
11
See step 12. Tighten the M5 x 19mm Screws
(52).
14. Set a Safety Spotter (13) on a set of pegs on
the Left Upright (11). Set the other Safety
Spotter (13) on a set of pegs on the Right
Upright (10). Make sure that both Safety
Spotters are at the same height.
14
10
13
13
11
15. Make sure that all parts have been properly
tightened. The use of the remaining parts will
be explained in ADJUSTMENT, beginning on
the following page.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 13 for impor-
tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for several exercises.
Make sure all parts are properly tightened each time you use the weight bench. Replace any worn parts immediate-
ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
USING THE CURL PAD
20
To use the Curl Pad (20), remove the indicated
70mm Square Inner Cap (26) and insert the Curl
Post (6) into the Front Leg (4). Tighten an
Adjustment Knob (37) into the Front Leg. Make
sure that the Adjustment Knob passes through a
hole in the Curl Post.
26
6
4
When performing exercises that do not require the
Curl Pad (20), remove the Curl Pad and insert the
70mm Square Inner Cap (26) into the Front Leg (4).
37
ADJUSTING THE BACKREST
19
To adjust the position of the Backrest (19), lift the
indicated handle on the Backrest Post (15). Raise
or lower the Backrest, and insert the tab on the
lower end of the Backrest Post into one of the slots
in the Frame (1). Make sure that the tab is fully
inserted into one of the slots.
Handle
15
Tab
Slot
1
USING THE LEG LEVER
To use the Leg Lever (5), slide a weight plate (not
included) onto the Weight Tube (24) and secure it
with a Weight Clip (57). Note: When using the Leg
Lever, remove the curl bar (see USING THE
CURL BAR on page 12).
5
24
Weight
57
11
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE CURL BAR
When performing exercises that do not require the
Curl Bar (17), pull the Pin (35) out of the Leg Lever
(5) and remove the Curl Bar.
5
17
To attach the Curl Bar (17), insert the Pin (35) com-
pletely through the Leg Lever (5) and the Curl Bar.
35
ADJUSTING THE WEIGHT RESTS AND THE
SAFETY SPOTTERS
To adjust the height of the Weight Rests (12), raise
the Weight Rests to the desired height and tighten
an Adjustment Knob (37) into each Upright (10, 11).
Make sure that the Weight Rests are at the same
height and that the Adjustment Knobs are fully
tightened into the Uprights.
37
12
13
Peg
37
12
13
To adjust the position of the Safety Spotters (13),
move the Safety Spotters to a different set of pegs
on the Uprights (10, 11). Make sure that the
Safety Spotters are at the same height.
10
Peg
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
To increase the size and strength of your muscles,
Determining the appropriate length of time for each
workout, and the numbers of repetitions and sets to
push them close to their maximum capacity. Your mus- complete, is an individual matter. Avoid overdoing it
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
during the first few months of your exercise program.
Progress at your own pace and be sensitive to your
body’s signals. If you experience pain or dizziness
while exercising, stop immediately and cool down; find
out what is wrong before continuing. Remember that
adequate rest and a proper diet are important factors
in any exercise program.
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
right for you. Begin with 3 sets of 8 repetitions for each circulation, raising your body temperature and deliver-
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
ing more oxygen to your muscles.
WORKING OUT
Toning
Each workout should include 6 to 10 different exercis-
You can tone your muscles by pushing them to a mod- es. Select exercises for every major muscle group,
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
Schedule your workouts for the time of day when your
pleting more sets rather than by using high amounts of energy level is the highest. Each workout should be
resistance.
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body.
Cross Training
Cross training is an efficient way to get a complete and Exercising in an uncontrolled manner will leave you
well-balanced fitness program. An example of a bal-
anced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an elliptical exer-
ciser or exercise cycle, on Tuesday and Thursday.
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. Refer to the muscle chart on the
next page to find the names of the muscles.
The repetitions in each set should be performed
• Rest from both strength training and aerobic exercise smoothly and without pausing. The exertion stage of
for at least one full day each week to give your body
time to regenerate.
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
The combination of strength training and aerobic exer- during the return stage. Never hold your breath.
cise will reshape and strengthen your body, plus devel-
op your heart and lungs.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The
ideal resting periods follow:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Make copies of the exercise logs found on pages 15
and 16. Use the logs to record your weight and key
body measurements at the end of every month.
Remember, the key to achieving the greatest results is
to make exercise a regular and enjoyable part of your
everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
R
S
C
D
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
W
X
J
K
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
/
WEDNESDAY
Date:
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
/
FRIDAY
Date:
/
Make photocopies of this page for scheduling and recording your workouts.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. 831.15715.0
R0707A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
2
1
1
2
2
2
1
2
1
1
1
1
2
6
6
1
8
1
3
2
1
20
2
Frame
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
*
6
2
4
1
1
3
1
1
2
1
17
8
2
10
1
1
2
2
2
4
4
2
6
18
1
1
–
–
M6 Washer
Front Stabilizer
Rear Stabilizer
Front Leg
Leg Lever
Curl Post
Standard Extension
Olympic Extension
Base
Right Upright
Left Upright
Backrest Bushing
25mm Square Inner Cap
Pin/Tether
M8 Nylon Locknut
Adjustment Knob
Seat Bracket
Bumper
9
Upright Bushing
Weight Tube Spacer
M10 Nylon Locknut
M10 x 90mm Carriage Bolt
M10 x 85mm Bolt
M10 x 90mm Bolt
M8 x 70mm Bolt
M10 x 77mm Bolt Set
M6 x 80mm Screw
M8 Washer
M10 x 165mm Bolt
M6 x 40mm Screw
M5 x 19mm Screw
M6 x 20mm Screw
M4 X 19mm Screw
M10 Washer
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Weight Rest
Safety Spotter
Upright Spacer
Backrest Post
Backrest Frame
Curl Bar
Seat
Backrest
Curl Pad
Short Pad Tube
Foam Pad
Pad Cap
Weight Tube
76mm Round Outer Cap
70mm Square Inner Cap
57mm Round Inner Cap
Connector
25mm Round Outer Cap
25mm Round Inner Cap
Curl Bushing
Long Pad Tube
Weight Clip
User’s Manual
Exercise Guide
Grease Packet
Hex Key
*
*
*
–
–
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated. If a part is missing, call toll-free 1-877-992-
5999.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. 831.15715.0
R0707A
34
19
16
32
51
55
42
16
55
50
51
32
42
55
6
34
20
55
33
50
18
33
53
30
15
30
17
25
38
23
26
4
42
1
22
37
47
30
31
22
43
23
39
54
32
48
47
42
42
55
31
3
32
56
27
25
44
23
48
42
42
5
22
27
22
21
23
29
22
41
36
49
27
2
21
25
23
49
24
46
35
54
22
30
43
57
25
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. 831.15715.0
R0707A
12
54
54
40
12
54
37
14
54
30
55
40
14
37
13
30
7
28
10
30
45
42
28
55
30
52
55
8
45
42
13
45
25
42
9
52
25
55
55
55
42
55
45
11
42
25
42
45
55
42
45
42
9
43
25
43
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Get it fixed, at your home or ours!
Your Home
For repair—in your home—of all major brand appliances, lawn and garden equipment,
or heating and cooling systems, no matter who made it, no matter who sold it!
For the replacement parts, accessories, and user’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME® (1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1-800-488-1222 Call anytime, day or night (U.S.A. only)
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación a domicilio, y para ordenar piezas:
1-888-SU-HOGAR® (1-888-784-6427)
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC
90 DAY FULL WARRANTY
If this Weight Bench Exerciser fails due to a defect in material or workmanship within 90 days of the
date of purchase, call 1-800-4-MY-HOME® (1-800-469-4663) to arrange for free repair (or replacement
if repair proves impossible).
This warranty does not apply when the Weight Bench Exerciser is used commercially or for rental pur-
poses.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Part No. 254490 R0707A
Printed in China © 2007 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|