Installation Instructions
SYLT40
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect
yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property dam-
age! Retain instructions for future reference.
Drain Water
Removal System
System Applications
This system pumps waste water up to an existing water drain
and is designed for residential use in:
Laundry trays
Wet bar sinks
Dehumidifiers
Washing machines
Sinks and tubs
Air conditioners
System Benefits
Completely assembled
Lightweight
Economical
Corrosion resistant
Installs above floor
Fully automatic
Suds proof
Easily installed
Fully sealed
Compact
Installation and Hook Up
Figure 1 - Pump and Housing
1. Connect pipe leading from system to discharge pipe
(Depending on the installation, a coupling or reducer may
be necessary).
4. Test operational cycle. (To prolong the life expectancy of
this system, flush with tap water every three months.
This pump is not designed for use in
2. Apply soapy water to seal in system lid and insert vent
through seal.
!
WARNING
septic tanks or underground vaults to
handle raw sewage or effluents. Never use this unit in haz-
ardous or explosive locations.
3. Verify pipe is inserted 2 inches into lid opening.
Figure 3 - Installation with Air Conditioner or
Dehumidifier
Figure 2 - Installation with Sink or Laundry Tub
Specifications
Sump Pump
Information Basin Size
Inlet
Discharge
Vent
Weight
Check Valve
4/10 HP
UL Listed
10 Gallon w/ sealed lid
17” x 11” x 14”
1-1/2”
1-1/2”
1-1/2”
28 lbs.
Included
Fully Automatic
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
331100-001 1/04
© 2004 Wayne Water Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
|