TELEPORT ™
Z-Wave® enabled
Universal A/V Remote Control
User Manual
For Model WDHC-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Custom Programming. . . . . . . . . . . . . . . .28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Additional Information. . . . . . . . . . . . . . . . . . . . . . . 30
Manufacturer’s Code . . . . . . . . . . . . . . . . . . . . . . . 31
Setup Codes for Audio Amplifiers. . . . . . . . . . . 31
Setup Codes for Audio Receivers. . . . . . . . . . . 32
Setup Codes for Audio Accessories . . . . . . . . . 35
Setup Codes for Cable Boxes/Converters . . . . . 35
Setup Codes for CD Players . . . . . . . . . . . . . . . 36
Setup Codes for DBS. . . . . . . . . . . . . . . . . . . . . 37
Setup Codes for DVD Players . . . . . . . . . . . . . . 38
Setup Codes for DVD/PVR Combos . . . . . . . . . . 42
Setup Codes for Home Automation . . . . . . . . . . 43
Setup Codes for Satellite Receivers . . . . . . . . . 43
Setup Codes for DVR/PVR Systems . . . . . . . . . . 46
Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . 47
Setup Codes for TVs (DLP) . . . . . . . . . . . . . . . . 55
Setup Codes for TVs (LCD). . . . . . . . . . . . . . . . . 55
Setup Codes for TVs (Plasma) . . . . . . . . . . . . . . . . 57
Setup Codes for TV/DVD Combos . . . . . . . . . . . 59
Setup Codes for TV/VCR Combos . . . . . . . . . . . . 61
Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . 63
Setup Codes for Video Accessories . . . . . . . . . . . 67
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The Teleport™ Remote Control has sophisticated
technology which allows you to consolidate up to four of
your original home entertainment remote controls into one
easy-to-use product.
®
Teleport™ lets you control individual Z-Wave devices or
groups of devices by using scenes. For example, you can
turn on and off your lights or you can set-back your
thermostat and lower your window shades at the same
time. Teleport™ will also give you the capability to do
macro commands such as when you press play for your
DVD player, your lights dim down and the window shades
lower or, as another example, if you pause the DVD player
the lights could dim up half-way; stop the DVD player and
the lights turn on fully. Use your imagination to meet your
needs.
Teleport™ is packed with many other advanced features
such as:
•
•
Capability to fully control your cable or satellite set-top
Dedicated keys to control popular functions on your
DVR/PVR (Digital/Personal Video Recorder)
Programmable Macro Keys to allow you to activate
certain keys in a specific order
Volume Lock to lock volume controls to one mode or
individual modes
•
•
•
Code Search to help program control of older or
discontinued components
•
Code library for popular video and audio devices
Before using the product, you will need to install the
enclosed batteries and also perform some programming to
operate the specific home entertainment devices you wish
to control. Please follow the instructions detailed in this
manual to set up the unit and then start enjoying your new
Teleport™ remote control.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AND FUNCTIONS
Use the illustration below to locate features on the
Teleport™ Universal A/V Remote Control and then study
the KEY CHARTS (on the next 3 pages) to learn how they
function.
To find out what type of devices can be controlled by each
device mode key after programming, see DEVICE TABLE on
page 8.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Charts
Key
Function
Use SETUP for all programming
sequences. Also use to turn backlighting
ON/OFF, if applicable.
Press POWER once to turn ON or OFF a
home entertainment device.
Press TV, DVD/VCR, SAT or AMP once to
select a home entertainment device to
control. Also see DEVICE MODE TABLE on
page 8.
Each device mode key has an embedded
LED (red light) that blinks upon selection
and indicates the remote control is
working and (after programming) is
sending signals.
Use GUIDE to display the program guide.
Use ALL to control all lighting nodes in the
network.
Use INFO to display the current channel
and program information.
Use the CURSOR keys to move the cursor
in the program guide and menu screens
and to navigate within the interactive
service.
Use OK to choose options, PPV events, and
to tune to programs from the program
guide.
Use EXIT to exit out of your cable
converters menu and guide.
Use VOL+ (or VOL -) to raise (or lower) the
audio volume.
Use BRIGHT or DIM to control the
brightness level of your lights.
Use CH+ (or CH-) to select the next higher
(or lower) channel.
For DVD players, use these keys to skip
forward (or reverse) through chapters.
For amplifiers/receivers, use these keys to
select the next higher (or lower) preset
station.
®
Use ON or OFF to turn your Z-Wave
compatible devices on or off.
Continued next page...
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
Function
Press MUTE once to turn the sound OFF
or ON.
Press CANCEL to stop the transfer of info
from a lighting node to your remote.
Press LAST once to recall the last
channel.
Use
to command your PVR/DVR
to instantly skip forward in the program
you are watching.
Use
to command your PVR/DVR
to instantly skip backward in the program
you are watching.
Press LIVE to command your PVR.DVR
cable box to return to watching live TV.
In all modes except SAT, use REW, PLAY,
FFWD, STOP and PAUSE to control a VCR,
DVD player, or a PVR (after selecting a
desired device.) To record in the VCR
mode, press REC twice.
In the SAT mode, use these keys to
control the DVR.PVR functions of the
set-top box.
Use the keypad numbers 1 - 9 and 0, to
directly tune channels (e.g., 09.)
For amplifiers/receivers, use the keypad
numbers to select inputs 1 through 10.
Use TV/VID to select an input source.
Use ADD, REMOVE, DELETE, or SCENE to
control your Z-Wave® compatible devices.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Mode Table
Please refer to the table below when performing
NOTE:
the instructions in “Programming Device Control”
on page 9 or “Setting Up a Combo Unit” on page
11.
After programming, the Teleport™ Remote Control will
able to control the following types of devices:
Device Mode Controls these types of devices
Audio Amplifier, Tuner, Receiver, CD
Player, Home Automation, or
Miscellaneous Audio
Television
DVD Player, VCR, PVR
Satellite Receiver, Cable Box
(Converter), or Video Accessory
Dedicated to Z-Wave® controls
INSTALLING BATTERIES
1
2
3
1. On the back of the remote control, push the tab and
lift off the battery cover.
2. Locate the four (4) enclosed AAA batteries. Match
the + and - marks with those in the battery case, then
insert them.
Continued next page...
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Align the keys in the cover with the keys in the case
and press the cover back into place. The tab should click
when the cover is locked.
4. Test the remote control by pressing any
mode key (e.g. TV.) If the batteries are inserted
correctly, the LED (red light) will blink once.
NOTE: When batteries need replacement, the mode LED
blinks 5 times with each key press. Replace the batteries
and the unit will be restored to its full functionality,
complete with your favorite settings.
PROGRAMMING DEVICE MODE CONTROL
The Teleport™ Remote Control is pre-programmed to
operate an RCA satellite receiver, TV, DVD player, and VCR.
It can also control Z-Wave® certified devices, regardless of
manufacturer. To control devices other than the default
brands, perform the following steps; otherwise skip this
section.
NOTES: For control of a Combo device (for example, a
TV/VCR combo), skip this section and perform the
instructions on “Setting Up a Combo Unit” on page 11.
Also, refer to “Device Table” on page 8 to determine which
devices can be programmed onto each device key.
1. Turn on a device and, if applicable, insert video media,
(e.g., cassette or disk.)
NOTE: Please read Steps 2 - 4 completely before
proceeding. Highlight or write down the codes and device
you wish to program before proceeding to Step 3.
2. On the remote control, press a mode key
once (i.e., TV, DVD/VCR, SAT or AMP); it will
blink once. Then press and hold SET UP until
the selected mode key blinks twice.
3. Use the “Manufacturer’s Codes” (starting on page 31)
to locate the type of device and brand name, then enter
the first five-digit code for your device. If performed
correctly, the selected mode key will blink twice.
NOTE: If the selected mode LED emits one long, steady
blink, the operation was not successful; repeat the
sequence.
Continued next page...
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Aim Teleport™ at the device and press PWR
once. The device should turn off. If it does not,
repeat steps 2 -3, trying each code for your brand
unit until you find one that works. If it still does
not respond, try searching for the code (see
“Searching for Your Code” on page 12.)
NOTE: If the device does not have a PWR key, press the
PLAY key (
.)
5. Repeat Steps 1 -4 for each device you want Teleport™ to
operate. For future reference, record the codes which work
in the boxes below.
VCR Code
Device Type:___________________
DVD Code
Device Type:___________________
AMP Code
Device Type:___________________
SAT Code
Device Type:___________________
TV Code
Device Type:___________________
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP A COMBO UNIT
If you own a combo unit such as a TV/DVD Combo or a
TV/VCR Combo, follow the Steps below:
1. Turn on your TV/DVD Combo and insert a DVD, or if
TV/VCR Combo, insert a video cassette.
2. On Teleport™ press DVD/VCR once; it will
blink once. Then press and hold SETUP until the
DVD/VCR mode key blinks twice.
3. Use the “Manufacturer’s Codes” starting on page 28 to
locate the brand name and enter the first five-digit code for
your combo device(for example, TV/VCR.) If you perform
this procedure correctly, the DVD/VCR key will blink twice.
Note: If the DVD/VCR mode key did not blink twice after
entering the last digit of the code, repeat steps 2 and 3
entering the same code again.
If the setup code that works for your combo device (for
example, TV/DVD combo) also has a separate TV code
listed, programming the separate TV code into Teleport™ is
necessary for TV volume and channel control. See
“Programming Device Control” on page 9.
4. Aim Teleport™ at your combo device (for
example TV/DVD combo) and press PWR once.
The device should turn off. If it does not respond,
repeat steps 2 and 3, trying each code listed for
your brand until one works. If it still does not
respond, try searching for the code. See
PWR
“Searching for Your Code” starting on page 12.
5. For future reference, write down each working device
code in the boxes below:
TV/VCR or TV/DVD Code
TV Code (if used)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the
Teleport™ remote control after trying all of the codes listed
for your brand, or if your brand is not listed at all, try
searching for your code using the following procedure:
NOTE: The example shown below is for a TV, to search
for codes of other devices, substitute the appropriate mode
key (e.g. DVD/VCR, AMP or SAT) for the device you are
searching for.
1. Turn on your TV.
2. On Teleport™, press TV once; it will blink
once. Then press and hold SETUP until the TV
key blinks twice.
3. Enter 991. The TV key will blink twice.
4. Aim Teleport™ at the TV and press PWR
once.
5. Press and release the CH+ key continuously
until the TV turns off.
NOTE: In the search mode, Teleport™ will
send IR codes from its library to the selected
device, starting with the most popular code
first.
6. Press PWR. The TV should turn on, then
press SETUP to lock in the code.
NOTE: If the TV does not turn on during step 6,
then slowly press and release CH- to back
through the codes. When the TV turns on press
SETUP to lock in the code.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
REVEALING DEVICE CODES
If you have set up the Teleport™ remote control by
searching for your device code (on the previous page), you
may need to determine what the code is.
The example below is for a TV, to reveal the codes of other
devices, substitute the appropriate key (e.g. DVD/VCR, AMP
or SAT) for the device you are searching for.
1. On Teleport™ press TV once; it will blink once. Then
press and hold SETUP until the TV key blinks twice.
2. Enter 990 on the numeric keypad; the TV key will blink
twice.
3. For the first digit, press 1 once. Count the number of
times the TV key blinks and write down the number in the
leftmost TV Code box on page 10 (e.g., 3 blinks = 3.)
NOTE: If a code digit is 0, the selected mode key will not
blink.
4. Repeat step 3 four more times for the remaining digits,
except press 2 for the second digit, 3 for the third digit, 4
for the fourth digit and 5 for the fifth digit. Write each code
in the box provided for TV codes on page 10.
LEARNING FEATURE
Teleport™ has many pre-programmed codes, but you may
find there are one or more keys on the original remote
which are not defined on Teleport™. As a convenience,
Teleport™ includes a Learning feature so you can add
functions that are unique to your original home
entertainment remote (e.g., VCR tracking up or down.)
Please note the following considerations:
• Your original remote controls must be in working order
for Learning to work properly.
• Learned keys are mode-specific, so each one can store
a unique function for each mode.
• Do not use the following keys for learning: Device keys,
SETUP, RECORD (•), Numeric keypad keys
•Learning capacity is approximately 16 to 25 keys
depending on the code being learned.
• Certain device functions are not learnable including
multi-frequency types, some high frequency ones, and
other unusual formats.
• For optimum learning, avoid high levels of ambient light
such as natural sunlight or energy-efficient fluorescent
lights.
NOTE: Please have your original remote controls handy
before programming learning.
Continued next page...
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming a Learned Key
NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
1. On Teleport™ press and hold SETUP until the
last-selected mode key blinks twice.
2. Enter 975 on the numeric keypad.
NOTE: If the LED emits one long, steady blink,
the operation was not successful; repeat the
sequence.
3. Press a mode key once (e.g.,TV, DVD/VCR,
SAT, AMP) to assign a mode for learning.
4. Press the key on Teleport™ that is to learn the new
code.
5. Place the Teleport™ remote control head-to-head
(about 2 inches apart) from your original remote control.
Locate the key on your original remote control that you
want the Teleport™ remote control to learn.
2"
6. On the original remote, press and hold the key you
want Teleport™ to learn. The Teleport™ remote control
LED will blink rapidly, then turn off. Continue holding the
key on the original remote until the Teleport™ remote
control LED blinks twice.
NOTE: If the LED on Teleport™ emits one long, steady
blink, the operation was not successful; repeat the
sequence. If the function is still not captured, press and
hold SETUP to exit programming and review the “Learning
Precautions” on the previous page. If needed, also see
“Troubleshooting” on page 28. After review, start
programming again at Step 1.
7. Repeat Steps 2 through 5 for another mode
and/or key. To exit programming, press and hold
SETUP.
Continued next page...
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting a Single Learned Key
This process returns the LEARNED Teleport™ key to its
original programming for the mode you select. You can
also delete LEARNED programming by teaching a different
function to the key. See “Programming a Learned Key” on
page 14.
NOTE: If more than 15 seconds pass between key presses,
the remote exits programming.
1. On Teleport™ select the mode, containing
the key to be deleted.
2. Press and hold SETUP until the last-selected
mode key blinks twice.
3. Enter 976 on the numeric keypad.
4. Press a mode key once (e.g., TV, DVD/VCR,
SAT, AMP.)
5. Press the key on Teleport™ containing the learned
function to be deleted, twice. The remote will blink twice.
6. Repeat Steps 2 through 4 for another key.
To exit programming, press and hold SETUP.
Deleting All Learned Keys in a Specific Mode
NOTE: If more than 15 seconds pass between key presses,
the remote exits programming.
1. On Teleport™ select the mode to be deleted.
2. Press and hold SETUP until the last-selected
mode key blinks twice.
2. Enter 976 on the numeric keypad.
3. Press a mode key twice (e.g. TV, DVD/VCR,
SAT, AMP) to clear all the learned keys for that
mode. The LED will blink twice.
4. Repeat Step 2 to delete another mode. To
exit programming, press and hold SETUP.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING VOLUME LOCK
Volume Lock allows you to control the volume through the
device identified as having your primary speaker(s),
regardless of which mode (device) you are using. For
example: If you are watching a DVD and want to adjust the
volume, which is a TV function, you can simply press the
volume key up or down without pressing the TV mode key.
You can also perform Individual Volume Unlock on a
selected device to set its volume control for independent
operation.
NOTE: The audio mode’s (AMP) volume controls are active
regardless of Volume Lock settings. However, if you lock
the volume controls to the AMP mode, you will have control
of the audio device’s volume in all other modes
(i.e, VCR/ DVD, TV, SAT.) This can be advantageous if, for
example, you always listen to home entertainment devices
through your receiver’s speakers.
Locking Volume Control To One Mode
(Global VolumeLock)
1. On Teleport™ press and hold SETUP until
the last-selected device mode key blinks
twice.
2. Enter 993. The last-selected device mode
key will blink twice.
3. Select a mode (TV, DVD/VCR, SAT, AMP)
which you want to use to control the volume.
The selected device mode key will blink
twice.
Now, when you press VOL+, VOL-, or MUTE, the volume of
the selected device (e.g. TV) is controlled regardless of
mode.
Continued next page...
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1. Assuming Global Volume Lock is active,
select a mode on the Teleport™ remote
control that you want to unlock (e.g., SAT)
and press it once.
2. Next, press and hold SETUP until the
device key blinks twice.
3. Enter 993 on the numeric keypad. The
last-selected device key will blink twice.
3. Press VOL- once. The last-selected device
key will blink twice.
5. Repeat Steps 1 - 3 for each device you want
volume to be unlocked.
Now, after you select a device that has volume
unlocked (e.g. SAT) pressing VOL+, VOL-, or
MUTE will control only that device’s volume
Unlocking All Volume Control
(Global Volume Unlock)
NOTE: Performing these instructions will set independent
volume control for all programmed devices.
1. On Teleport™ press and hold SETUP until the
last-selected mode key blinks twice.
2. Enter 993 on the numeric keypad. The
last-selected device key will blink twice
3. Press VOL+ once. The last-selected device
key will blink four times.
Continued next page...
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MACRO KEY BASICS
The Teleport™ remote control includes a macro key
feature. Macro keys allow you to create small programs
which activate a series of key presses in a specific
order(sequence of commands.) For example, you can set
up a macro to do the following set of actions with a single
key press: change the channel on your TV, start playing a
DVD and dim the lights.
NOTE: Any previously-programmed macro key must be
cleared before it can be changed, see “Clearing a Macro
Key” below.
Programming a Macro Key
1. On Teleport™ press and hold SETUP until the
last-selected mode key blinks twice.
2. Enter 995 on the numeric keypad. The
last-selected mode key blinks twice.
3. Select a macro key, for example, the number 1
on the numeric key pad, and press it once.
4. Press the key sequence you want to program
into the macro. For example, to turn on your TV
and raise its volume, press TV followed by VOL+.
NOTE: You can program up to 15 key presses into
one macro.
5. Press and hold SETUP until the last-selected
mode key blinks twice.
6. To add another macro, repeat Steps 1 - 5,
substituting the new key sequence to be added in
Step 4.
NOTE: Programming more than 5 macros on the same
macro key overwrites previous settings.
Clearing a Macro Key
1. On Teleport™ press and hold SETUP until the
last-selected mode key blinks twice.
2. Enter 995 on the numeric keypad. The
last-selected mode key blinks twice.
3. Press the macro key you want to clear once.
4. Press and hold SETUP until The last-selected
mode key blinks twice.
This macro key is now clear and ready for re-programming. To
re-program, see “Programming a Macro Key” above.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
RE-ASSIGNING DEVICE MODE KEYS
The Teleport™ remote control can be set up to control a
second device of an already-assigned mode. For example,
to have Teleport™ control a TV, cable converter box and
two audio receivers, re-assign the unused DVD/VCR mode
key to operate the second audio receiver as follows:
NOTE: DVD/VCR is preset at the factory to control an RCA
DVD. Performing the steps below will overwrite those
settings.
1. On Teleport™ press DVD/VCR once: it will
blink once. Press and hold SETUP until the
DVD/VCR key blinks twice.
2. Enter 992 on the numeric keypad.
3. Press AMP once, then press DVD/VCR once.
The DVD/VCR mode key will blink twice.
The DVD/VCR key is now ready to be programmed for your
second audio receiver. See “Programming Device Control”
on page 9. To re-assign other mode keys, repeat these
steps and substitute the key sequence using the following
chart:
NOTE: Only one mode can be assigned to an unused mode
key at a time.
To Re-Assign
Perform Key Sequence
DVD/VCR as
DVD/2nd AMP
VCRSETUP992
AMPDVD/VCR
VCRSETUP992
TVDVD/VCR
DVD/VCR as
DVD/2nd TV
DVD/VCR as
2nd SAT
VCRSETUP992
TVDVD/VCR
DVD/VCR
VCRSETUP992
back to VCR
DVD/VCR DVD/VCR
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING A Z-WAVE® NETWORK
The Teleport™ Universal A/V remote control allows you to control
lights, thermostats and many other devices around your home
using additional Z-Wave® certified products from Wayne-Dalton
Corporation.
Teleport™ communicates with your Z-Wave® nodes (devices)
using radio signals. Large metal objects, house wiring, walls,
furniture, refrigerators, microwaves and similar items, may
interfere and reduce the range of your unit. A Z-Wave® network
is a collection of Z-Wave® nodes in a mesh type of network. Each
Z-Wave® node, regardless of manufacturer, communicates with
all the other nodes within its range to route and repeat the signals
from one device to the next, thus creating a highly robust network
transmission throughout the home.
A Z-Wave® network can have only one primary controller. The
primary controller establishes the network security to ensure your
network will not operate your neighbors network and vice-versa.
It is a good practice to label and protect your primary controller
since it is the only Z-Wave® controller that can add more nodes to
your network or delete nodes from your network. It is easy to add
secondary controllers as your network grows. For more tips and
great ideas on how to use and expand Teleport™ with Z-Wave®
Information on the following pages provide details on specific
commands and features available on the Teleport™ remote
control for use with your Z-Wave® network.
The following tips may be useful in setting up Z-Wave® control on
your Teleport™ Universal A/V remote control. Page numbers
indicate the page in this manual where you can find specific
instructions for performing that step.
If you do NOT have an existing network:
1. Install your Z-Wave® nodes that are to be controlled.
2. Delete the Z-Wave® nodes to be controlled from any existing
network they may be in. (page 21)
3. Add the nodes to be controlled to Teleport™. (page 21)
NOTE: Your Teleport™ is now the primary controller of your
Z-Wave® network.
4. Add the nodes to be controlled to a scene. (page 22)
5. Test your scene by activating the scene. (page 23)
If your scene is not correct, repeat step 4.
6. Repeat steps 4 and 5 for each additional scene you wish to
create.
7. If you have additional Z-Wave® controllers, they can be made
secondary controllers in the network by copying network and
scene information as desired. (page 24)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
If you do have an existing Z-Wave® network:
1. Using your existing network’s primary controller, transfer the
network information to Teleport™. (page 26)
Your Teleport™ is now a secondary controller in your Z-Wave®
network.
NOTE: As a secondary controller, some Z-Wave® commands will
not be available such as the ability to add nodes to the network or
create additional secondary controllers.
2. Add the nodes to be controlled to a Teleport™ scene. (page 22)
3. Test your scene by activating the scene. (page 23)
If your scene is not correct, repeat step 2.
4. Repeat steps 2 and 3 for each additional scene you wish to
create.
Adding a Node to your Z-Wave® Network
To add a Z-Wave® node to your Z-Wave® network(or start
creating a network,) perform the following steps:
1. On Teleport™ press the HOME key once.
2. Press and release ADD twice. The HOME key red LED
blinks rapidly.
3. Press the program button on the Z-Wave® node.
4. The HOME LED blinks green twice to indicate a
successful operation..
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
Be certain Teleport™ is within 3 ft. of the the node.
Deleting a Node from a Z-Wave® Network
To remove a Z-Wave® node from a Z-Wave® network,
perform the following steps:
1. On Teleport™ press HOME once.
2. Press and release DEL twice. The HOME red LED blinks
rapidly.
3. Press the program button on the node.
4. The HOME LED blinks green twice to indicate a
successful operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP Z-WAVE® SCENES
®
®
A Z-Wave SCENE is a one or more Z-Wave nodes that
can be pre-set to turn to a previously specified setting (ON,
OFF, DIM brightness level, etc...). The Teleport™ remote
control allows you to set up a maximum of 20 scenes,
containing up to 64 nodes per scene.
Adding a Z-Wave® Node to a SCENE
1. On Teleport™ press and release HOME once.
2. Press and release ADD once.
3. Press and release SCENE once.
4. Press and release a scene number for the scene you
wish to add the node to. For scenes 0 - 9 press and
release the number for the scene (e.g. 2 for scene 2,) for
scenes 10 -19, press SETUP then the second digit of the
scene number (e.g. SETUP + 4 = scene 14.) The HOME
red LED blinks rapidly.
5. Press the program button on the node.
6. The HOME green LED blinks twice, then the HOME red
LED blinks rapidly. Adjust the brightness on the Z-Wave®
node within 30 seconds. To configure the node to turn
on/off to max/min levels, simply press OK without
adjusting brightness.
7. Press OK to save the node in the scene.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
Be certain Teleport™ is within 3 ft. of the the node.
Removing a Node from a SCENE
1. On Teleport™ press HOME once.
2. Press and release REMOVE once.
3. Press and release SCENE once.
4. Press and release a scene number for the scene you
wish to remove the node from. For scenes 0 - 9 press
and release the number for the scene (e.g. 2 for scene 2,)
for scenes 10 -19, press SETUP then the second digit of
the scene number (e.g. SETUP + 4 = scene 14.) The
HOME red LED blinks rapidly.
5. Press the program button on the node.
6. The HOME green LED blinks twice, then the HOME red
LED blinks rapidly.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting a Z-WAVE® SCENE
1. On Teleport™ press HOME once.
2. Press and release DELETE once.
3. Press SCENE once.
4. Press and release a scene number for the scene you
wish to remove. For scenes 0 - 9 press and release the
number for the scene (e.g. 2 for scene 2,) for scenes 10
thru 19, press SETUP then the second digit of the scene
number (e.g. SETUP + 4 = scene 14.) The HOME red LED
blinks rapidly.
5. Press the program button on the node.
6. The HOME green LED blinks twice, then the HOME red
LED blinks rapidly.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
®
ACTIVATING Z-WAVE SCENES
1. On Teleport™ press HOME once.
2. Press and release a scene number for the scene you
wish to control. For scenes 0 - 9 press and release the
number for the scene (e.g. 2 for scene 2,) for scenes 10
thru 19, press SETUP then the second digit of the scene
number (e.g. SETUP + 4 = scene 14.) The HOME red LED
blinks rapidly.
3. On Teleport™ press the ON, OFF, DIM, or BRIGHT KEY.
The HOME green LED blinks once.
If ON or OFF is pressed, all nodes associated to the scene
will turn on or off. If DIM or BRIGHT is pressed, all nodes
associated with a scene dim or brighten with each key
press.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not fully successful and indicates one
®
or more Z-Wave nodes failed to respond in the activated
scene. The cause will need to be investigated to
determine if it is un-responsive for a temporary condition
such as the light bulb is burned out or the node has
become unplugged or if the failure is is due to a
®
catastrophic condition with the Z-Wave node or the node
is missing entirely.
Activating ALL ON/ALL OFF
1. On Teleport™ press HOME once.
2. Press and release ALL once.
3. Press either ON or OFF. The HOME green LED blinks
once.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Nodes to ALL CONTROL
1. On Teleport™ press HOME once.
2. Press and release ADD once.
3. Press ALL once. The HOME red LED blinks rapidly.
4. Press the program button on the Z-Wave® node.
The HOME green LED will blink twice to indicate the
operation was successful.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
Deleting Nodes from ALL CONTROL
1. On Teleport™ press HOME once.
2. Press and release REMOVE once.
3. Press ALL once. The HOME red LED blinks rapidly.
4. Press the program button on the Z-Wave® node.
The HOME green LED will blink twice to indicate the
operation was successful.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
TRANSFERRING NODE AND NETWORK
INFORMATION TO A SECONDARY REMOTE
®
If Teleport™ is your primary controller in your Z-Wave
network, you can add a secondary remote and transfer
Teleport™’s node and network information to it.
Teleport™ will remain your primary controller and is the
®
only controller that can add or delete Z-Wave nodes to
your network.
1. Place the two controller’s near each other.
2. Press the HOME mode key on Teleport™.
3. Press and hold SETUP until the HOME red LED blinks
twice.
4. Enter 966 on the numeric keypad. The HOME red LED
blinks twice.
5, Press CH+; the HOME red LED blinks rapdily.
6. Put the target (secondary) controller into receive
mode. Refer to the target controller’s user manual for
specific instructions.
The HOME green LED blinks twice to indicate a
successful operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
7. Add nodes, groups, and scenes to the new secondary
remote as needed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSFERRING NETWORK INFORMATION
ONLY TO A SECONDARY REMOTE
®
If Teleport™ is the primary controller in your Z-Wave
network, you can add a secondary controller to your
®
network, transferring only your Z-Wave network
information to it. Groups, Scenes and other Z-Wave
®
commands will then need to be created on the secondary
controller.
1. Place the two controllers near each other.
2. On Teleport™, press the HOME mode key.
3. Press and hold SETUP until the HOME red LED blinks
twice.
4. Enter 966 on the numeric keypad. The HOME red LED
blinks twice.
5, Press CH - ; the HOME red LED blinks rapidly.
6. Put the target (secondary) controller into receive
mode. Refer to the target controller’s user manual for
specific instructions.
The Teleport™ HOME key green LED blinks twice to
indicate a successful operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
7. Add nodes, groups, and scenes to the new secondary
remote as needed.
PRIMARY CONTROLLER SHIFT
You can transfer the Z-Wave® primary controller role from
Teleport™ remote to another controller. This can be
done in two ways: a) transferring all network and scene
information or b) transferring network information only.
Transferring Primary Controller Role with all Network
and Scene Information:
1. Place the two controllers near each other.
2. On Teleport™, press the HOME mode key.
3. Press and hold SETUP until the HOME red LED blinks
twice.
4. Enter 968 on the numeric keypad. The HOME red LED
blinks twice.
5. Press CH+; the HOME red LED blinks rapidly.
6. Put the target (secondary) controller into receive
mode. Refer to the target controller’s user manual for
specific instructions.
The Teleport™ HOME key green LED blinks twice to
indicate a successful operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
7. Add nodes, groups, and scenes to the new primary
controller as needed.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Primary Controller Role with Network
Information Only:
1. Place the two controller’s near each other.
2. On Teleport™, press the HOME mode key.
3. Press and hold SETUP until the HOME red LED blinks
twice.
4. Enter 966 on the numeric keypad. The HOME red LED
blinks twice.
5. Press CH-; the HOME red LED blinks rapidly.
6. Put the target (secondary) controller into receive
mode. Refer to the target controller’s user manual for
specific instructions.
The Teleport™ HOME key green LED blinks twice to
indicate a successful operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
7. Add nodes, groups, and scenes to the new secondary
controller as needed.
RECEIVE CONTROLLER COPY
You can transfer the Z-Wave® network information from
another Z-Wave® controller to Teleport™. This would
then allow Teleport™ to become a new secondary
controller or a primary controller if the existing primary
controller is programmed to transfer the primary role.
Receiving Z-Wave® Network Information from another
Controller:
1. Place the two controllers near each other.
2. On Teleport™, press the HOME mode key.
3. Press and hold SETUP until the HOME red LED blinks
twice.
4. Enter 967 on the numeric keypad. The HOME red LED
blinks twice.
5. Put the primary controller into copy send mode.
Refer to the primary controller’s user manual for specific
instructions.
The Teleport™ HOME key green LED blinks twice to
indicate a successful operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
6. Add nodes, groups, and scenes to the Teleport™
remote as needed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Z-WAVE NETWORK RESET
Z-Wave® Network Reset clears all Z-Wave® node and
network information from Teleport™.
1. Press the HOME key on Teleport™.
2. Press and hold SETUP until the HOME red LED blinks
twice.
3. Enter 969 on the numeric keypad. The HOME red LED
blinks continuously.
The HOME green LED blinks twice to indicate a successful
operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
®
Z-WAVE NETWORK RE-DISCOVERY
Network re-discovery is used to make your Z-Wave®
network more efficient and improve performance if, for
example, a Z-Wave® plug-in module was moved across
the room.
NOTE: This operation requires Teleport™ to be the
primary controller.
CAUTION: This operation may take several minutes
depending on the size of your network.
1. On Teleport™, press the HOME key.
2. Press and hold SETUP until the HOME red LED blinks
twice.
3. Enter 961 on the numeric keypad. The HOME red LED
blinks continuously.
The HOME green LED blinks twice to indicate a successful
operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
®
REMOVING A FAILED Z-WAVE NODE FROM
THE NETWORK
NOTE: This operation requires Teleport™ to be the
primary controller in your Z-Wave® network.
CAUTION: This operation will PERMANENTLY remove an
un-responsive Z-Wave® node from your network even if it
is un-responsive for a temporary condition such as the
light bulb is burned out or the module has become
unplugged. Before performing this operation, thoroughly
investigate the cause to confirm it is due to a catastrophic
condition with the Z-Wave® node.
If a Z-Wave® node fails to respond in the network, the
HOME key LED on Teleport™ will emit a long red blink
when trying to access the failed node.
1. Press and hold SETUP until the red LED blinks twice.
2. Enter 972 on the numeric keypad. The HOME green
LED will blink continuously.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
CLEARING CUSTOM PROGRAMMING
The Teleport™ remote control contains a Custom
Programming Reset program which will remove all
custom programming, except your setup codes.
CAUTION: This operation will PERMANENTLY remove all
custom settings for Volume Lock, Learned Keys, Channel
Lock and numeric keypad keys.
1. On Teleport™ press a mode key (TV, DVD/VCR, SAT,
AMP) then press and hold SETUP until the last-selected
mode key blinks twice.
NOTE: This does not work on the HOME key for home
controls.
2. Enter 980 on the numeric keypad. The last-selected
device key blinks twice, pauses and blinks twice again to
confirm that all custom programming is cleared.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a
key.
SOLUTION: Replace the batteries with four(4) new AAA
batteries. See “Installing Batteries” on page 8.
PROBLEM: Device key blinks when you press a key, but
home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control
at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home
entertainment devices or commands are not performing
properly.
SOLUTION: Try all listed codes for the device brand being
set-up. Make sure all devices can be operated with an
infrared remote control.
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing Volume
Lock”on page 14.
PROBLEM: PLAY and STOP keys do not work on a
Motorola DCT-2000 cable converter.
SOLUTION: Re-program the SAT key for cable code 0476.
See “Programming Device Control” on page 9.
PROBLEM: Tried SEARCH METHOD and still could not find
a working code.
SOLUTION: Try SEARCH METHOD again after clearing out
the device key using the following procedure:
a) Press and hold SETUP until device key blinks twice.
b) Enter 992.
c) Press and release the device key to be cleared, twice.
PROBLEM: Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require
programming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 032. For Sharp, use TV
code 0093 and VCR code 0048.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC NOTICE
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
This equipment has been verified to comply with the
limits for a class B computing device, pursuant to FCC
Rules. In order to maintain compliance with FCC
regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or
unshielded cables is likely to result in interference to
radio and TV reception. The user is cautioned that
changes and modifications made to the equipment
without the approval of manufacturer could void the
user’s authority to operate this equipment.
FCC ID: MG35300
ADDITIONAL INFORMATION
This product does not have any user-serviceable parts.
Opening the case, except for the battery cover, may cause
permanent damage to your Teleport™ Remote Control.
•
For help via the Internet, visit us at:
©Copyright 2008 by Wayne-Dalton Corp. No part of this
publication may be reproduced, transmitted, transcribed,
stored in any retrieval system, or translated to any language, in
any form or by any means, electronic, mechanical, magnetic,
optical, manual, or otherwise, without prior written
permission of Wayne-Dalton Corp.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
Setup Codes for Audio Amplifiers
Adcom
30577, 31100
Aiwa
30406
Bose
30674
Carver
30269
Denon
30160
Durabrand
Elan
31561
30647
GE
30078
Harman/Kardon
JVC
30892
30331
Left Coast
Lenoxx
Linn
30892
31561
30269
Luxman
Magnavox
Marantz
McIntosh
Nakamichi
NEC
30165
30269
30892, 30321, 30269
30251
30321
30264
Optimus
Panasonic
Parasound
Philips
Pioneer
Polk Audio
RCA
30395, 30823
30308, 30521
30246
30892, 30269
30823
30892, 30269
30823
Realistic
Sansui
Shure
30395
30321
30264
Sony
30689, 30220, 30815, 31126
Soundesign
Technics
Victor
30078, 30211
30308, 30521
30331
Wards
Yamaha
30078, 30211
30354, 30133, 30143
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for Audio Receivers
ADC
30531
Aiwa
31405, 30158, 30189,
30121, 30405, 31243,
31388, 31641
Akai
31512
Alco
31390
Amphion Media Works
AMW
Anam
Apex Digital
Arcam
31563, 31615
31563, 31615
31609, 31074
31257, 31430, 31774
31120
Audiotronic
Audiovox
B & K
31189
31390, 31627
30701, 30820, 30840
30702
BK
Bose
31229, 30639, 31253,
31629, 31841, 31933
Brix
31602
Cambridge Soundworks 31370
Capetronic
Carver
Classic
30531
31189, 30189, 30042
31352
Coby
31263, 31389
31420
30080
31250
31383
Criterion
Curtis Mathes
Daewoo
Dell
Delphi
31414
Denon
Fisher
Garrard
31360, 30004, 31142
30042, 31801
30463
Gateway
Glory Horse
Go Video
Harman/Kardon
31517
31263
31532
30110, 30189, 30891,
31304, 31306
Hewlett Packard
Hitachi
Initial
31181
31273, 31801
31426
Insignia
31030
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Integra
JBL
30135, 31298, 31320
30110, 31306
JVC
30074, 31263, 31374,
31495, 31811, 31871
Kenwood
31313, 31570, 31569,
30027, 31916, 31670,
31262, 31261, 31052,
31032, 30569, 30337,
30314, 30313, 30239,
30186, 30077, 30042
KLH
Koss
Lasonic
Lenoxx
LG
31390, 31412, 31428
31366, 31497
31798
31437
31293
Linn
30189
Liquid Video
LXI
31497
30181
Magnavox
31189, 31269, 30189,
30391, 30531, 31514
Marantz
31189, 31269, 30039,
30189, 31289
MCS
Mitsubishi
NAD
Nakamichi
Norcent
Nova
30039, 30346
31393
30320, 30845
30097, 30876, 31555
31389
31389
Onkyo
30135, 30380, 30842,
31298, 31320, 31531
Optimus
31023, 30042, 30080,
30181, 30186, 30531,
30670, 30738, 30801, 31074
Oritron
31366, 31497
Panasonic
31308, 31518, 30039,
30309, 30367, 31288,
31316, 31548, 31633,
31763, 31764
Philips
31189, 31269, 30189,
30391, 31120, 31266
Pioneer
31023, 30014, 30080,
30150, 30244, 30531,
30630, 31384
Polaroid
31508
Polk Audio
30189, 31289, 31414
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Proscan
Quasar
RadioShack
RCA
31254
30039
31263
31023, 31609, 31254,
30054, 30080, 30346,
30530, 30531, 31074,
31154, 31390, 31511
Realistic
Regent
30181
31437
Rio
Saba
31383, 31869
31519
Samsung
Sansui
Sanyo
Sharp
Sharper Image
Sherwood
31295, 31500
30189, 30346
30801, 31251, 31469, 31801
30186, 31286
31263, 31556
30491, 30502, 31077,
31423, 31517, 31653, 31905
Shinsonic
Sirius
Sonic Blue
Sony
31426
31602, 31627, 31811, 31987
31383, 31532, 31869
31058, 31441, 31258,
31759, 31622, 30158,
30168, 31349, 31406,
31442, 31558, 31658,
31758, 31858, 31958
Soundesign
Stereophonics
Sunfire
30670
31023
31313, 30313, 30314, 31052
Teac
30463, 31074, 31390, 31528
Technics
Thorens
Toshiba
Venturer
Victor
31308, 31518, 30039, 30309
31189
31788
31390
30074
Wards
30158, 30189, 30014,
30054, 30080
XM
31406, 31414
Yamaha
30176, 30186, 31176,
31276, 31331, 31375, 31476
Zenith
30857, 31293
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for Audio Accessories
Accurian
31106
Aiwa
30159
Altec Lansing
Apple
31056, 31485
31115, 31644
Cambridge Soundworks 31530
Creative
iDeck
30872
31106
31491
31106
31464
31644
31785
Marantz
Monitor Audio
Motorola
NaviPod
Netgear
Omnifi31605
Roku
31828
Russound
Slim Devices
Sony
31302
31844
30159
Yamaha
31809, 31810
Setup Codes for Cable Boxes/Converters
ABC
00003, 00008
Americast
Bell South
Digeo
00899
00899
01187
Director
00476
General Instrument
GoldStar
Hamlin
00476, 00810, 00276, 00003
00144
00273
Jerrold
Memorex
Motorola
00476, 00810, 00276, 00003
00000
01376, 00476, 00810,
00276, 01187
Pace
01877, 00237, 00008
00000, 00107
00000
01305, 00317
01877, 00877, 00144, 00533
00000
Panasonic
Paragon
Philips
Pioneer
Pulsar
Quasar
RCA
00000
01256
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Regal
00273
Runco
00000
Samsung
Scientific Atlanta
Sony
00144
01877, 00877, 00477, 00008
01006
Starcom
Supercable
Thomson
Torx
00003
00276
01256
00003
Toshiba
Zenith
00000
00000, 00525, 00899
Setup Codes for CD Players
Aiwa
30157
Burmester
California Audio Labs
Carver
Denon
DKK
30420
30029, 30303
30157, 30179
30873, 30003, 30034
30000
DMX Electronics
Fisher
30157
30179
Garrard
30420
Genexxa
Harman/Kardon
Hitachi
30032
30157, 30173
30032
Integra
30101
JVC
30072
Kenwood
30681, 30626, 30028,
30037, 30190
KLH
31318, 31372, 31373, 31711
Krell
30157
Linn
30157
Magnavox
Marantz
MCS
30157
30626, 30029, 30157
30029
Miro
30000
Mission
MTC
30157
30420
NSM
30157
Onkyo
30868, 30101
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Optimus
31063, 30000, 30032,
30037, 30087, 30145,
30179, 30420, 30468, 31075
Panasonic
Parasound
Philips
30029, 30303, 30388, 30752
30420
30626, 30157
Pioneer
31063, 31062, 30032,
31087, 30468
Polk Audio
Proton
QED
30157
30157
30157
30157
30029
31075
Quad
Quasar
RadioShack
RCA
31062, 30032, 30053,
30179, 30420, 30468
Realistic
Rotel
SAE
30179, 30420
30157, 30420
30157
Sansui
Sanyo
Sharp
Sherwood
Sonic Frontiers
Sony
30157
30087, 30179
30861, 30037
31067
30157
30490, 30000, 30100,
31364, 30185
Soundesign
TAG McLaren
Tascam
Teac
30145
30157
30420
30420
Technics
Victor
30029, 30303
30072
Wards
Yamaha
30157, 30053
30490, 30888, 30036, 31292
Setup Codes for DBS
AlphaStar
00772
Coolsat
DirecTV
Dishpro
Echostar
Hitachi
01806
01377, 00392
01505, 01005, 00775, 01775
01505, 01005
00819
37
Download from Www.Somanuals.com. All Manuals Search And Download.
HTS
00775, 01775
Hughes Network Systems 00749, 01749
JVC
LG
00775, 01775
01414
Magnavox
Memorex
Motorola
Panasonic
Philips
RCA
00724, 00722
00724
00869
00247, 00701
00724, 01076, 00722, 00099
00566, 00855, 00143, 01392
01276, 01109
01639
Samsung
Sony
Star Choice
Toshiba
Uniden
Zenith
00869
00749, 00790, 01285
00724, 00722
01856
Setup Codes for DVD Players
Accurian
21072, 21416
Adcom
21094
Advent
21016
Aiwa
20641
Akai
20695, 20770, 20899, 21089
Alco
Allegro
Amphion Media Works
AMW
20790
20869
20872
20872
Apex Digital
20672, 20717, 20755,
20794, 20796, 20797,
20830, 21004, 21020,
21056, 21061, 21100
Arrgo
21023
Aspire Digital
Audiovox
21168, 21407
20790, 21071, 21072,
21121, 21122
Axion
21071, 21072
21571
20717
20571
20695, 20868
20831
Bel Canto Design
Blaupunkt
Blue Parade
Broksonic
Cinea
38
Download from Www.Somanuals.com. All Manuals Search And Download.
CineVision
Citizen
Coby
20876, 20833, 20869
20695, 21277
20778, 21086, 21107, 21177
20831
Craig
Curtis Mathes
CyberHome
21087
20816, 20874, 21023,
21024, 21117, 21129, 21502
Daewoo
20784, 20705, 20833,
20869, 21169, 21172,
21234, 21242
Denon
Desay
20490, 20634
21407
DigitalMax
Disney
Dual
Durabrand
DVD2000
Emerson
Enterprise
ESA
21738
20675, 21270
21068, 21085
21127
20521
20591, 20675, 20821, 21268
20591
20821, 21268
20670
Fisher
Funai
Gateway
GE
20675, 21268, 21334
21073, 21077, 21158, 21194
20522, 20815, 20717
Go Video
20744, 20715, 20741,
20783, 20833, 20869,
21044, 21075, 21099,
21158, 21304, 21730
Go Vision
GoldStar
Greenhill
Harman/Kardon
Hitachi
Hiteker
Humax
iLo
21071, 21072
20741
20717
20582, 20702
20573, 20664, 21247
20672
21588
21348
Initial
20717
Insignia
Integra
JBL
21268
20627
20702
Jensen
21016
39
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC
20558, 20623, 20867,
21164, 21275, 21602, 21863
Kawasaki
Kenwood
KLH
20790
20490, 20534
20717, 20790, 21020, 21149
20651
Koss
Lasonic
Lenoxx
LG
20798
21127
20591, 20741, 20801, 20869
LiteOn
21058, 21158, 21416,
21440, 21738
Loewe
20511
Magnavox
20503, 20539, 20646,
20675, 20821, 21268, 21506
Malata
20782
Marantz
McIntosh
Memorex
Microsoft
Mintek
20539
21273
20695, 20831, 21270
20522, 21708
20839, 20717
21521, 20521
20741
Mitsubishi
NAD
Nakamichi
NEC
21222
20785
Nesa
20717
NexxTech
Norcent
Onkyo
21402
21003, 20872, 21107, 21265
20503, 20627, 20792
20651
Oritron
Panasonic
20490, 20632, 20703,
21362, 21462, 21490, 21762
Philips
20503, 20539, 20646,
20675, 20854, 21260,
21267, 21354
Pioneer
Polaroid
Polk Audio
Portland
Presidian
Prima
20525, 20571, 20631, 20632
21020, 21061, 21086
20539
20770
20675, 21072, 21738
21016
Proscan
ProVision
20522
20778
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Qwestar
RCA
20651
20522, 20571, 20717,
20790, 20822, 21022,
21132, 21769
Rio
20869
Rotel
Rowa
20623, 21178
20823
Sampo
Samsung
20698, 20752
20490, 20573, 20199,
20820, 20899, 21044, 21075
Sansui
20695
Sanyo
Sensory Science
Sharp
Sharper Image
Sherwood
Shinsonic
Sonic Blue
Sony
20670, 20695, 20873
21158
20630, 20675, 20752, 21256
21117
20633, 20770, 21043, 21077
20533, 20839
20869, 21099
20533, 21533, 20864,
21033, 21070, 21431, 21892
Sova
21122
Superscan
Sylvania
Symphonic
TAG McLaren
Teac
20821
20675, 20821, 21268
20675, 20821
20894
20790
Technics
Theta Digital
Tivo
20490, 20703
20571
21503
Toshiba
20503, 20695, 21045,
21154, 21503, 21588, 21769
Tredex
20800
Urban Concepts
US Logic
Venturer
Vizio
Xbox
Yamaha
Zenith
20503
20839
20790
21064, 21226
20522, 21708
20490, 20539, 20545
20503, 20591, 20741, 20869
21265
Zoece
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for DVD/PVR Combos
Controlled by the DVD
Go Video
Humax
Panasonic
Pioneer
RCA
21730
21588
20490
20631
20522
Sharp
21256
Sylvania
Toshiba
20675
21503, 21588
Controlled by the VCR
RCA
20880
Sylvania
Toshiba
20000
21008, 21996
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for Home Automation
Accutek
31215
Amana
31716
Audio Access
Bionaire
Comfortex
Da-Lite
30154
30846, 31215
30400
30780
Frigidaire
GE
31333, 31845
30240
GoldStar
Holmes
31537
31215
Hunter Douglas
Kenmore
Lasko
30433
31537
30846
LG
31537
Lightolier
LiteTouch
Lutron
One For All
PCS
30184
30084
30597, 30318, 31239, 31597
30167
30184
RadioShack
Royal Sovereign
Russound
Security System
Sharper Image
SmartLinc
Somfy
30240
31651
31232, 31233
30167
30846
30184
30780
Universal X10
Whirlpool
Windmere
X10
30167
31332
31215
30167
Setup Codes for Satellite Receivers
AlphaStar
Bell ExpressVu
Chaparral
Coolsat
00772
00775, 01170
00216
01806
Crossdigital
01109
43
Download from Www.Somanuals.com. All Manuals Search And Download.
DirecTV
01377, 00392, 00566,
00639, 01639, 01142,
00247, 00749, 01749,
00724, 00819, 01856,
01076, 01108, 00099,
01109, 01392, 01414,
01442, 01443, 01444,
01609, 01640
Dish Network System
01505, 01005, 00775,
01170, 01775
Dishpro
01505, 01005, 00775, 01775
Echostar
01505, 01005, 00775,
01170, 01775
Expressvu
GE
00775, 01775
00566
General Instrument
00869
GOI
00775, 01775
01535
00819, 01250
00775, 01775
Hisense
Hitachi
HTS
Hughes Network Systems 01142, 00749, 01749,
01442, 01443, 01444
Humax
iLo
01790
01535
JVC
LG
00775, 01170, 01775
01226, 01414
00724, 00722
00724
00749
00869
00869
00247, 00701
01807
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Pansat
Paysat
00724
Philips
01142, 00749, 01749,
00724, 01076, 00722,
00099, 01442, 00856
Proscan
Proton
00392, 00566
01535
RadioShack
RCA
00869
00566, 00855, 00143, 01392
Samsung
01377, 01276, 01108,
01109, 01442, 01609
Sony
00639, 01639, 01640
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Star Choice
Tivo
Toshiba
UltimateTV
Ultrasat
Uniden
00869
01142, 01442, 01443, 01444
00749, 01749, 00790, 01285
01392, 01640
01806
00724, 00722
01535
US Digital
USDTV
01535
Voom
00869
Zenith
01856, 00856
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for DVR/PVR Systems
ABS
21972
21972
21972
21972
20739
21972
20614
21972
21972
21972
Alienware
CyberPower
Dell
DirecTV
Gateway
Go Video
Hewlett Packard
Howard Computers
HP
Hughes Network Systems 20739
Humax
20739
Hush
21972
iBUYPOWER
Linksys
21972
21972
Media Center PC
Microsoft
Mind
21972
21972
21972
Niveus Media
Northgate
Panasonic
Philips
21972
21972
20614, 20616
20618, 20739
20880
RCA
ReplayTV
Samsung
Sonic Blue
Sony
20614, 20616
20739
20614, 20616
20636, 21972
21972
Stack 9
Systemax
Tagar Systems
Tivo
Toshiba
Touch
21972
21972
20618, 20636, 20739
21008, 21972, 21996
21972
Viewsonic
Voodoo
21972
21972
ZT Group
21972
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for TVs
A-Mark
10003
Abex
10032
Accurian
Action
11803
10873
Admiral
Advent
10093, 10463
10761, 10783, 10815,
10817, 10842, 11933
Adventura
Aiko
10046
10092
Akai
10812, 10702, 10030,
10672, 11207, 11675,
11676, 11903, 11935
Alaron
10179
Albatron
Ambassador
America Action
Ampro
10700, 10843
10177
10180
10751
Anam
10180
AOC
10030, 10003, 10052, 11365
Apex Digital
10748, 10879, 10765,
10767, 10890, 11217, 11943
Archer
Astar
10003
11531, 11548
Audiovox
10451, 10180, 10092,
10003, 10623, 10710,
10802, 10846, 10875,
11284, 11937, 11951, 11952
Aventura
Axion
10171
11937
Bell & Howell
BenQ
Bradford
Broksonic
10154, 10016
11032, 11315
10180
10236, 10463, 10003,
11911, 11929, 11935, 11938
Byd:sign
Cadia
11309, 11311
11283
Candle
Carnivale
Carver
10030, 10046, 10056
10030
10054
Celebrity
Celera
10000
10765
Champion
Changhong
11362
10765
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Cinego
Citizen
11986
10060, 10030, 10092,
10039, 10046, 10056,
10280, 11928, 11935
Clarion
10180
Commercial Solutions
Concerto
Contec
11447, 10047
10056
10180
Craig
10180
Crosley
10054
Crown
10180, 10039
Curtis Mathes
10047, 10054, 10154,
10451, 10093, 10060,
10702, 10030, 10145,
10166, 11919, 11347,
11147, 10466, 10056,
10039, 10016
CXC
CyberHome
Cytron
10180
10794
11326
Daewoo
10451, 10092, 11661,
10039, 10623, 10661,
10672, 11928
Dell
Denon
Denstar
11080, 11178, 11264, 11403
10145, 10511
10628
Diamond Vision
Dumont
11996, 11997
10017
Durabrand
10463, 10180, 10178,
10171, 11034, 10003
Dwin
10720, 10774
10000
11623, 11755
10463
10154, 10236, 10463,
10180, 10178, 10171,
11963, 11944, 11929,
11928, 11911, 11394,
10623, 10280, 10179,
10177, 10039, 10038
Electroband
Electrograph
Electrohome
Emerson
Emprex
Envision
Epson
ESA
11422, 11546
10030, 10813, 11365
10833, 10840, 11290
10812, 10171, 11944, 11963
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Fisher
10154
FlexVision
Fujitsu
Funai
10710
10179, 10683, 10809, 10853
10180, 10171, 10179,
11271, 11904, 11963
Futuretech
Gateway
10180
11001, 11002, 11003,
11004, 11755, 11756
GE
11447, 10047, 10051,
10451, 10178, 10021,
10027, 11347, 11917,
11919, 11922
Gibralter
Go Video
10017, 10030
10886
GoldStar
Grunpy
Haier
Hallmark
10178, 10030, 10032, 11926
10180, 10179
11034, 10768
10178
Hannspree
Harley Davidson
Harman/Kardon
Harvard
11348, 11351, 11352
10179, 11904
10054
10180
Havermy
10093
Helios
10865
Hello Kitty
Hewlett Packard
10451
11088, 11089, 11101,
11494, 11502, 11642
Hisense
Hitachi
10748
11145, 10145, 10016,
10032, 10038, 10056,
10797, 11904, 11960
HP
11088, 11089, 11101,
11494, 11502, 11642
Hyundai
iLo
Infinity
Initial
10849, 11219, 11294
11286, 11603, 11990
10054
11603, 11990
Insignia
10171, 11204, 11326,
11517, 11564, 11963, 12002
Inteq
Janeil
JBL
10017
10046
10054
10000
JCB
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Jensen
10761, 10815, 10817,
11299, 11933
JVC
10053, 10731, 11253, 11923
Kaypani
KDS
10052
11498
KEC
10180
Kenwood
KLH
Kloss
Konka
10030
10765, 10767, 11962
10024, 10046
10628, 10632, 10638,
10703, 10707
Kost
KTV
LG
11262, 11483
10180, 10030, 10039, 10280
11265, 10178, 10700,
10823, 10829, 10856,
11178, 11325, 11423,
11758, 11993
Lloyd's
Logik
Luxman
LXI
11904
10016
10056
10047, 10054, 10154,
10156, 10178
MAG
Magnasonic
Magnavox
11498
11928
11454, 10054, 10030,
10706, 11990, 11963,
11944, 11931, 11904,
11525, 11365, 11254,
11198, 10802, 10386,
10187, 10179, 10096,
10024, 10020
Majestic
Marantz
10016
10054, 10030, 10704,
10854, 10855, 11154, 11398
Matsushita
Maxent
Megapower
Megatron
Memorex
10250, 10650
10762, 11211, 11755
10700
10178, 10145, 10003
10154, 10463, 10150,
10178, 10016, 10179,
11911, 11926
MGA
10150, 10178, 10030
Midland
10047, 10017, 10051,
10032, 10039
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Mintek
Minutz
11603, 11990
10021
Mitsubishi
10093, 11250, 10150,
10178, 10836, 10868,
11550, 11917
Monivision
Motorola
Moxell
10700, 10843
10093, 10835
10835
MTC
Multitech
NAD
10060, 10030, 10056
10180
10156, 10178, 10056,
10866, 11156
NEC
10030, 10056, 10497,
10882, 11398, 11704
NetTV
Nikko
10762, 11755
10178, 10030, 10092
Norcent
10748, 10824, 11089,
11365, 11589, 11590, 11591
Norwood Micro
Noshi
11286, 11296, 11303
10018
NTC
10092
Olevia
11144, 11240, 11331, 11610
Olympus
Onwa
11342
10180
Optimus
Optoma
Optonica
Orion
10154, 10250, 10166, 10650
10887
10093
10236, 10463, 11463,
10179, 11911, 11929
Panasonic
Penney
10250, 10051, 10650,
11291, 11410, 11480,
11919, 11941, 11946, 11947
10047, 10156, 10051,
10060, 10178, 10030,
10003, 10018, 10021,
10027, 10032, 10039,
11347, 11919, 11926
Petters
Philco
Philips
11523
10054, 10030, 10020, 10096
11454, 10054, 10690,
11154, 11483, 11961
Pilot
10030, 10039
Pioneer
10166, 10038, 10679,
10866, 11260, 11398
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Polaroid
10765, 10865, 11262,
11276, 11314, 11316,
11326, 11327, 11328,
11341, 11498, 11523,
11962, 11991, 11992
Portland
Prima
10092, 10039
10761, 10783, 10815,
10817, 11933
Princeton
Prism
10700, 10717
10051
Proscan
Proton
Protron
Proview
Pulsar
11447, 10047, 11347, 11922
10178, 10003, 10052, 10466
11320, 11323
10835, 11401, 11498
10017
Quasar
RadioShack
10250, 10051, 10650, 11919
10047, 10154, 10180,
10178, 10030, 10032,
10039, 10056, 11904
RCA
11447, 10047, 12002,
11958, 11953, 11948,
11922, 11919, 11917,
11547, 11347, 11247,
11147, 11047, 10679,
10090, 10038, 10018
Realistic
Runco
10154, 10180, 10178,
10030, 10032, 10039, 10056
10017, 10030, 10497,
10603, 11398
Sampo
10030, 10032, 10039,
10052, 10762, 11755
Samsung
10060, 10812, 10702,
10178, 10030, 10032,
10056, 10766, 10814,
11060, 11312, 11395,
11575, 11903, 11959
Samsux
Sansui
10039
10463, 11409, 11904,
11911, 11929, 11935
Sanyo
10154, 10088, 10146,
10799, 10893, 11142
Sceptre
Scotch
Scott
10878, 11217, 11360, 11599
10178
10236, 10180, 10178, 10179
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Sears
Sharp
10047, 10054, 10154,
10156, 10178, 10171,
10056, 10146, 10179,
11904, 11926
10093, 10039, 10386,
10491, 10688, 10689,
10818, 10851, 11602,
11917, 11393
Sheng Chia
Sherwood
Signature
Signet
SIM2 Multimedia
Simpson
10093
11399
10016
11262
11297
10187
Sony
11100, 10000, 10834,
11317, 11685, 11904, 11925
Soundesign
Sova
Soyo
10180, 10178, 10179
11320, 11952
11520
Spectricon
Spectroniq
Squareview
SSS
10003
11498
10171
10180
Starlite
10180
Studio Experience
Superscan
Supre-Macy
Supreme
SVA
10843
10093, 10864
10046
10000
10748, 10587, 10768,
10865, 10870, 10871, 10872
Sylvania
10054, 10030, 10171,
10020, 10096, 11271,
11314, 11394, 11931,
11944, 11963
Symphonic
Syntax
Tandy
10180, 10171, 11904, 11944
11144, 11240, 11331
10093
Tatung
10003, 11101, 11285,
11286, 11287, 11288,
11361, 11756
Technics
10250, 10051
10179
10847
Technol Ace
Techview
Techwood
10051, 10003, 10056
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Teknika
10054, 10180, 10150,
10060, 10092, 10016,
10039, 10056, 10179
Telefunken
Thomas
TMK
10702, 10056
11904
10178, 10056, 10177
10017
TNCi
Toshiba
10154, 11256, 10156,
11265, 10060, 11945,
11936, 11935, 11918,
11704, 11656, 11635,
11524, 11356, 11343,
11325, 11306, 11156,
10845, 10832, 10650, 11971
Totevision
TVS
10039
10463
Ultra
11323
Universal
US Logic
Vector Research
Victor
10027
11286, 11303
10030
10053
Vidikron
Vidtech
10054, 11398
10178
Viewsonic
10797, 10857, 10864,
10885, 11330, 11342,
11578, 11627, 11640, 11755
Viking
Viore
Visart
Vizio
10046
11207
11336
10864, 10885, 11499,
11756, 11758
Wards
10054, 10178, 10030,
10016, 10020, 10021,
10027, 10056, 10096,
10179, 10866, 11156
Waycon
10156
Westinghouse
10885, 10889, 10890,
11282, 11577
White Westinghouse
Wyse
10463, 10623
11365
Yamaha
10030, 10769, 10797,
10833, 10839
Zenith
Zonda
10017, 10463, 11265,
10178, 10092, 10016,
11904, 11911, 11929
10003
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for TVs (DLP)
Hewlett Packard
HP
11494
11494
LG
11265
Magnavox
Mitsubishi
Optoma
Panasonic
RCA
11525
11250
10887
11291
11447
Samsung
SVA
10812, 11060, 11312
10872
Toshiba
Vizio
11265, 11306
11499
Setup Codes for TVs (LCD)
Accurian
Action
11803
10873
Akai
AOC
11675, 11676, 11935
11365
Apex Digital
Astar
10890, 11217
11531, 11548
Audiovox
10180, 10710, 10802,
10846, 10875, 11284,
11937, 11951, 11952
BenQ
11315
Byd:sign
Cadia
11309, 11311
11283
Citizen
11935
CyberHome
Dell
Emprex
Envision
FlexVision
Funai
10794
11080, 11178, 11264
11422, 11546
10813, 11365
10710
10171
Go Video
Hannspree
Hewlett Packard
10886
11348, 11351
11088, 11642
55
Download from Www.Somanuals.com. All Manuals Search And Download.
HP
Hyundai
iLo
11088, 11642
10849, 11219, 11294
11286, 11603, 11990
11603, 11990
11204, 11517, 11564, 12002
11299
Initial
Insignia
Jensen
Kost
11262
LG
10856, 11178, 11993
10802, 11198, 11365, 11990
10855
10762, 11211, 11755
11603, 11990
11250
Magnavox
Marantz
Maxent
Mintek
Mitsubishi
NetTV
10762
Norcent
Norwood Micro
Olevia
Panasonic
Petters
11365, 11589, 11591
11286, 11296
11144, 11240, 11331, 11610
10650, 11941
11523
Philips
11454, 11483
Polaroid
11262, 11276, 11316,
11341, 11498, 11523
Protron
Proview
RCA
11320, 11323
11401
10047, 11958
Sampo
10762, 11755
Samsung
10812, 10766, 10814,
11395, 11575
Sansui
Sanyo
11409
11142
Sceptre
Sharp
10878, 11217, 11360, 11599
10093, 10818, 11602
Sherwood
Signet
Sony
11399
11262
11685
Sova
11320
Soyo
11520
Superscan
SVA
Sylvania
Symphonic
10864
10587, 10870, 10871
10171, 11271, 11314, 11394
10171
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Syntax
Tatung
11144, 11240, 11331
11286
Techview
Toshiba
10847
10845, 11343, 11524,
11635, 11656
Ultra
11323
11286
11398
10857, 10864, 10885,
11330, 11578, 11627, 11640
US Logic
Vidikron
Viewsonic
Visart
11336
Vizio
10864, 10885, 11756, 11758
Westinghouse
10885, 10889, 10890,
11282, 11577
Wyse
Zenith
11365
11265
Setup Codes for TVs (Plasma)
Akai
10812, 11207, 11675
Albatron
BenQ
10843
11032
Byd:sign
Daewoo
Dell
11311
10661
11264
Electrograph
ESA
11623, 11755
10812
Fujitsu
Funai
10683, 10809, 10853
11271
Gateway
11001, 11002, 11003,
11004, 11755, 11756
Helios
10865
Hewlett Packard
Hitachi
HP
Insignia
JVC
11089, 11502
10797
11089, 11502
11564
10731
LG
10178, 10829, 10856,
11423, 11758
Marantz
Maxent
10704, 11398
11755
Mitsubishi
10836
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Monivision
Motorola
Moxell
10843
10835
10835
NEC
NetTV
11398, 11704
11755
Norcent
Norwood Micro
Panasonic
Philips
10824, 11089, 11590
11303
10250, 10650, 11480
10690
Pioneer
Polaroid
Proview
Runco
10679, 11260, 11398
10865, 11276, 11327, 11328
10835
11398
Sampo
11755
Samsung
Sony
Studio Experience
SVA
10812, 11312
10000, 11317
10843
10865
Sylvania
Tatung
11271, 11394
11101, 11285, 11287,
11288, 11756
Toshiba
US Logic
Viewsonic
Viore
10650, 11704
11303
10797, 11755
11207
Vizio
Yamaha
Zenith
11756, 11758
10797
10178
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for TV/DVD Combos
Controlled by the TV
Accurian
Advent
Akai
Apex Digital
Audiovox
Axion
11803
11933
11675, 11935
11943
11937, 11951, 11952
11937
Broksonic
Cinego
Citizen
Diamond Vision
Emerson
ESA
11935
11986
11935
11997
11394, 11963
11963
Funai
11963
Hitachi
iLo
11960
11990
Initial
11990
Insignia
Jensen
KLH
11963, 12002
11933
11962
LG
11993
Magnavox
Mintek
Panasonic
Philips
Polaroid
Prima
11963, 11990
11990
11941
11961
11962, 11991
11933
RCA
11948, 11958, 12002
11903
11935
Samsung
Sansui
Sova
11952
Sylvania
Toshiba
11394, 11963
11635, 11935
Controlled by the DVD
Advent
21016
Akai
20695
Apex Digital
Audiovox
20830
21071, 21121, 21122
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Axion
21071
Broksonic
Citizen
Emerson
ESA
20695
20695
20675, 21268
21268
Funai
21268
Go Vision
Hitachi
Insignia
Jensen
Magnavox
Panasonic
Philips
Prima
21071
21247
21268
21016
21268
21490
20854, 21260
21016
RCA
21022
Samsung
Sansui
Sova
20899
20695
21122
Sylvania
Toshiba
20675, 21268
20695
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for TV/VCR Combos
Controlled by the TV
America Action
Audiovox
Broksonic
Citizen
10180
10180
11911, 11929
11928
Curtis Mathes
Daewoo
Emerson
Funai
11919
11928
10236, 11911, 11928, 11929
11904
GE
11917, 11919, 11922
11926
11904
GoldStar
Harley Davidson
Hitachi
11904
JVC
11923
Lloyd's
11904
Magnasonic
Magnavox
Memorex
Mitsubishi
Orion
Panasonic
Penney
Quasar
11928
11904, 11931
11926
11917
11911, 11929
11919
11919, 11926
11919
RadioShack
RCA
Samsung
Sansui
Sears
Sony
Sylvania
Symphonic
Thomas
Toshiba
11904
11917, 11919, 11922
11959
11904, 11911, 11929
11904, 11926
11904, 11925
11931
11904
11904
11918, 11936
11904, 11911, 11929
Zenith
Controlled by the VCR
America Action
20278
Audiovox
20278
Broksonic
20002, 20479, 21479
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Citizen
Colt
Curtis Mathes
Daewoo
Emerson
21278
20072
21035
21278
20002, 20479, 20593,
21278, 21479
Funai
20000
GE
20240, 20807, 21035, 21060
GoldStar
Harley Davidson
Hitachi
21237
20000
20000
LG
21037
Lloyd's
20000
Magnasonic
Magnavox
Magnin
Memorex
20593, 21278
20000, 20593, 21781
20240
20162, 21037, 21162,
21237, 21262
MGA
20240
Mitsubishi
Optimus
Orion
Panasonic
Penney
Quasar
RadioShack
RCA
20807
20162, 20593, 21162, 21262
20002, 20479, 21479
20162, 21035, 21162, 21262
20240, 21035, 21237
20162, 21035, 21162
20000, 21037
20240, 20807, 21035, 21060
21014
20000, 20479, 21479
20240
Samsung
Sansui
Sanyo
Sears
20000, 21237
Sony
20000, 21232
Sylvania
Symphonic
Thomas
Toshiba
Zenith
21781
20000, 20593
20000
20845, 21145
20000, 20479, 21479
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Codes for VCRs
ABS
21972
Admiral
Adventura
Aiko
20048, 20209
20000
20278
Aiwa
20037, 20000, 20124
21972
20278
20035
20240
Alienware
America Action
American High
Asha
Audiovox
Beaumark
Bell & Howell
Broksonic
20037, 20278
20240
20104
20184, 20121, 20209,
20002, 20479, 21479
Calix
20037
Canon
20035
Carver
20081
CCE
Citizen
Colt
20072, 20278
20037, 20278, 21278
20072
Craig
20037, 20047, 20240, 20072
20060, 20035, 20162, 21035
20240
21972
20045, 20278, 21278
21972
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
Denon
20042
DirecTV
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
20739
20039, 20038
20000
20037
20037
20032
20037, 20184, 20000,
20121, 20043, 20209,
20002, 20278, 20479,
20593, 21278, 21479, 21593
Fisher
Fuji
20047, 20104
20035, 20033
Funai
20000, 20593, 21593
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Garrard
Gateway
GE
20000
21972
20060, 20035, 20240,
20807, 21035, 21060
Go Video
GoldStar
Gradiente
20432, 20614
20037, 20038, 21237
20000
Harley Davidson
Harman/Kardon
Harwood
20000
20081, 20038
20072
Hewlett Packard
HI-Q
21972
20047
Hitachi
Howard Computers
HP
20000, 20042, 20089
21972
21972
Hughes Network Systems 20042, 20739
Humax
Hush
20739
21972
iBUYPOWER
JVC
21972
20067
KEC
Kenwood
KLH
20037, 20278
20067, 20038
20072
Kodak
LG
20035, 20037
21037
Linksys
Lloyd's
Logik
LXI
21972
20000
20072
20037
Magnasonic
Magnavox
20593, 21278
20035, 20039, 20081,
20000, 20149, 20563,
20593, 21593, 21781
Magnin
20240
Marantz
Marta
20035, 20081
20037
Matsushita
Media Center PC
MEI
20035, 20162, 21162
21972
20035
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Memorex
20035, 20162, 20037,
20048, 20039, 20047,
20240, 20000, 20104,
20209, 20479, 21037,
21162, 21237, 21262
MGA
20240, 20043
20240
21972
MGN Technology
Microsoft
Mind
21972
Minolta
20042
Mitsubishi
Motorola
MTC
Multitech
NEC
20067, 20043, 20807
20035, 20048
20240, 20000
20000, 20072
20104, 20067, 20038
20037
Nikko
Niveus Media
Noblex
21972
20240
Northgate
Olympus
Optimus
21972
20035
21062, 20162, 20037,
20048, 20104, 20432,
20593, 21162, 21262
Orion
20184, 20209, 20002,
20479, 21479
Panasonic
21062, 20035, 20162,
20225, 20614, 20616,
21035, 21162, 21262
Penney
20035, 20037, 20240,
20042, 20038, 21035, 21237
Pentax
Philco
Philips
20042
20035
20035, 20081, 20618,
20739, 21081, 21181
Pilot
20037
Pioneer
Polk Audio
Presidian
Profitronic
Proscan
Protec
20067
20081
21593
20240
20060, 21060
20072
Pulsar
20039
Quasar
20035, 20162, 21035, 21162
65
Download from Www.Somanuals.com. All Manuals Search And Download.
RadioShack
Radix
20000, 21037
20037
Randex
RCA
20037
20060, 20240, 20042,
20149, 20807, 20880,
21035, 21060
Realistic
20035, 20037, 20048,
20047, 20000, 20104
ReplayTV
Ricavision
Runco
20614, 20616
21972
20039
Samsung
Sanky
20240, 20045, 20739, 21014
20048, 20039
Sansui
20000, 20067, 20209,
20479, 21479
Sanyo
Scott
Sears
20047, 20240, 20104
20184, 20045, 20121, 20043
20035, 20037, 20047,
20000, 20042, 20104, 21237
Sharp
20048, 20807, 20848
20072
20240
Shintom
Shogun
Singer
20072
Sonic Blue
Sony
20614, 20616
20035, 20032, 20033,
20000, 20636, 21032,
21232, 21972
Stack 9
STS
21972
20042
Sylvania
20035, 20081, 20000,
20043, 20593, 21593, 21781
Symphonic
Systemax
Tagar Systems
Teac
20000, 20593, 21593
21972
21972
20000
Technics
Teknika
Thomas
Tivo
20035, 20162
20035, 20037, 20000
20000
20618, 20636, 20739, 21996
20240
TMK
Toshiba
20045, 20043, 20845,
21008, 21145, 21972, 21996
Totevision
20037, 20240
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch
Unitech
Vector
Vector Research
Video Concepts
Videomagic
Videosonic
Viewsonic
Villain
21972
20240
20045
20038
20045
20037
20240
21972
20000
21972
Voodoo
Wards
20060, 20035, 20048,
20047, 20081, 20240,
20000, 20042, 20072, 20149
White Westinghouse
XR-1000
Yamaha
20209, 20072
20035, 20000, 20072
20038
Zenith
20039, 20033, 20000,
20209, 20479, 21479
ZT Group
21972
Setup Codes for Video Accessories
ABS
01272
Accurian
Alienware
CyberPower
D-Link
01653
01272
01272
01554, 01731
01563
Epson
Escient
01151, 01370, 01371
01272
01272, 01267
01272
Gateway
Hewlett Packard
Howard Computers
HP
01272
Hush
01272
iBUYPOWER
JVC
01272
01384
LG
01415
Linksys
01272, 01365
01272
01272
Media Center PC
Microsoft
Mind
01272
Motorola
01363
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Niveus Media
Northgate
Panasonic
Pioneer
01272
01272
01120
01010
Ricavision
Roku
01272
01486
Samsung
Sensory Science
Sharp
01190, 01490
01126
01010
Sony
Stack 9
01272, 01324, 01364
01272
Sylvania
Systemax
Tagar Systems
Toshiba
01563
01272
01272
01272
Touch
01272
Viewsonic
Vizio
01272, 01329
01126
Voodoo
01272
ZT Group
01272
68
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
0002992 Rev A
70
Download from Www.Somanuals.com. All Manuals Search And Download.
|