Q U I C K
C L A M P
THINBAND® Heater with
Quick Clamp
Now...Install THINBAND
Barrel Heaters In Seconds
Makes Changing Heaters
A Snap!
Watlow set new standards in band heaters with THINBAND®.
Now Watlow makes it even easier to install THINBAND heaters
with the Quick Clamp option. The flexible one-piece design
makes installation on plastics molding equipment faster and
easier. Because it can be opened to the full diameter of the
barrel without causing internal damage to the heater, the
THINBAND heater can be installed on a barrel without removing
other band heaters already in place or requiring a more
expensive two-piece design.
THINBAND opens up to fit
over barrel. No need to
remove other heaters.
One easy flip of the latching
lever and Quick Clamp shuts,
completing installation.
1
2
And now with Quick Clamp, the THINBAND can be secured
tightly in place in a matter of seconds. The spring-loaded clamp
secures the heater tightly around the barrel with an easy flip of
the lever.
Clearance Dimensions
Width Range
in (mm)
# Quick
Distance
Clamps Between Clamps
in (mm)
11⁄
23⁄
33⁄
43⁄
53⁄
2
(38.1) to 211⁄
(69.9) to 311⁄
(95.3) to 411⁄
(120.6) to 511⁄
16
16
16
16
(69.3)
(94.8)
1
2
2
3
3
NA
(12.7)
1
4
⁄
2
"
Quick Clamp continuously tensions heater against barrel
for improved heat transfer.
4
(120.1)
(145.5)
1"
(25.4)
(12.7)
(25.4)
1
4
⁄
2
"
3
4
(146.1) to 7 (145.5)
1"
•
THINBAND with Quick Clamp fits over barrels and snaps in
place with easy flip of its latching lever.
• Standard gap is 1⁄
• If space for thermocouple is necessary, a maximum of 11⁄
gap can be allowed between heater ends. Specify when
ordering.
2
inch.
•
•
•
Hot change-outs are completed in seconds.
No tools needed.
4
inch
Spring-tensioned clamp keeps THINBAND heater tight
against barrel—won't loosen over time.
•
•
Ideal for vertical applications.
Available on selected stock and made-to-order THINBAND
barrel heaters—minimum four inch (100 mm) diameter,
11⁄
2
inch (38 mm) width.
1
2 ⁄
8
"
12001 Lackland Road
St. Louis, Missouri 63146 USA
Phone: 314-878-4600
Fax: 314-878-2151
e-mail: [email protected]
Contact your Authorized Watlow
distributor for more details and
ordering information.
© 2001 Watlow Electric Manufacturing Company
FAX-1844-1100
Download from Www.Somanuals.com. All Manuals Search And Download.
|