Item #: W52CCR
Assembly Instructions
Revised 07/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
General Assembly Guidelines
I.
Ensure that all parts and hardware are available before beginning assembly.
Follow each step carefully to ensure the proper assembly of this product.
Two people are recommended for ease in the assembly of this product.
II.
III.
IV.
The main types of hardware used to assemble this product are wood dowels, cam bolts
and locks, bolts and screws.
V.
The provided glue is to secure wood dowels in place. When first inserting dowels, locate
the appropriate hole for the dowel, place a small amount of glue in the hole and insert the
dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts together,
place a small amount of glue on the end of the dowel before attaching parts together.
Wipe away excess glue immediately.
VI.
A Phillips head screwdriver is required for the assembly of this product.
VII.
Power tools should not be used to assemble this product.
VIII. The hinges of this product can be adjusted three ways:
Horizontal
Forward and Back
Vertical
P.2
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware List
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert dowels (A) into panels (2,5).
Insert dowels (A) into panels (3,4) and slats (14). Screw cam bolts (B) into panels (3,4) and slats (14).
Download from Www.Somanuals.com. All Manuals Search And Download.
Screw cam bolts (B) into top panel (1).
Screw cam bolts (B) into bottom panel (9).
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach slat (14) to panel (3) using cam bolts and dowels as guides. Secure the two pieces together using cam
locks (C). Tighten cam locks (C) with a screwdriver.
Attach slat (14) to panel (4) using cam bolts and dowels as guides. Secure the two pieces together using cam
locks (C). Tighten cam locks (C) with a screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach panels (3,4) to panel (5) using cam bolts and dowels as guides.
Secure panel (3) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure panel (4) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Attach the panel assembly from the previous step to bottom panel (9) using cam bolts and dowels as guides.
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure panel (3) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Secure panel (4) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully slide panels (2) into place using cam bolts and dowels as guides.
Secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
On opposite side of console, secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C)
with a screwdriver.
Carefully slide back panels (10,11) into place along back side of console. Panels (10,11) will overlap slightly as
shown in insert above.
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure back panels (10,11) to the console using screws (J).
Carefully fit top panel (1) into place using cam bolts and dowels as guides.
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure top panel (1) to panels (2,3) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Secure top panel (1) to panels (2,4) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
2
On back side of console, secure top panel (1) to panels (2) using cam locks (C). Tighten cam locks (C) with a
screwdriver.
Cover all visible cam locks with stickers (K) as desired.
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach hinges (G) to doors (12,13) using screws (H).
Attach doors (12,13) to the console using screws (H) at hinges (G). See page 2 for specific instructions on
how to adjust hinges so doors are aligned with console as desired. Attach handles (D) to doors (12,13) using
bolts (E).
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert shelf support pins (F) into console at desired shelf heights.
Insert shelf support pins (F) into console at desired shelf heights.
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully place shelves (6,7,8) into console. Shelves (6,7,8) will rest on the shelf support pins.
Download from Www.Somanuals.com. All Manuals Search And Download.
|