Walker Indoor Furnishings V44Y76 User Manual

Item #: V44Y76

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 12/2010

Download from Www.Somanuals.com. All Manuals Search And Download.

Hardware List

Download from Www.Somanuals.com. All Manuals Search And Download.

Carefully lay glass (1) upside down on a soft surface. Screw long rods (A) and short rods (B) into the appropriate

metal plates of glass (1).

Slide cylinders (4) onto back long rods (A). Slide large decorative rings (D) onto back long rods (A) and snap

onto cylinders (4). Slide cylinders (7) onto front long rods (A). Slide small decorative rings (E) onto front long

rods (A) and snap onto cylinders (7).

Download from Www.Somanuals.com. All Manuals Search And Download.

Carefully slide glass (2) into place using long rods (A) as guides. Slide large decorative rings (D) onto back long

rods (A). Slide small decorative rings (E) onto front long rods (A).

Slide cylinders (3) onto back long rods (A). Slide large decorative rings (D) onto back long rods (A) and snap

onto cylinders (3). Slide cylinders (6) onto front long rods (A). Slide small decorative rings (E) onto front long

rods (A) and snap onto cylinders (6). Cylinders (3,6) will fit snuggly into the decorative rings placed in the

previous step.

Download from Www.Somanuals.com. All Manuals Search And Download.

Carefully slide glass (2) into place using long rods (A) as guides. Slide large decorative rings (D) onto back long

rods (A). Slide small decorative rings (E) onto front long rods (A).

Screw cylinders (5) onto back long rods (A). Screw cylinders (8) onto front long rods (A). Cylinders (5,8) will fit

snuggly into the decorative rings placed in the previous step.

Download from Www.Somanuals.com. All Manuals Search And Download.

Insert large caps (F) into cylinders (5) and small caps (G) into cylinders (8). Note that caps (F,G) may come

pre-inserted into cylinders (5,8).

To attach cable management system (9) to the stand, place appropriate holes of cable management system (9)

over short rods (B). Screw cap nuts (C) onto short rods (B) and tighten with wrench (H).

Download from Www.Somanuals.com. All Manuals Search And Download.