VIZIO
QUICK START GUIDE
Model: SB4020E-B0
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
DO NOT INGEST BATTERY,CHEMICAL BURN HAZARD
The remote control supplied with this product contains a coin/button cell battery.If the coin/button cell battery.If the coin/button cell battery is swallowed,it can cause severe internal burns
in just two (2) hours and can lead to death.
Keep new and used batteries away from children.If the battery compartment does not close securely,stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body,seek immediate medical attention.
A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,fire,or the like.
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
SUB- MUTE SUB+
SRS
TVOL
SRS
TSHD
High Definition Sound Bar
Remote Control with Battery
Power Adapter w/Cable
Stereo RCA to 3.5mm
Audio Cable
Digital Optical
Cable
This Quick Start Guide
Wall Mount Template
Wall Mount Brackets
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS & CONNECTIONS
Connections are located here:
Power Port
Aux Input
Optical Input
(Stereo 3.5mm)
Service Port
For use only by service technician.
Sub Out
Aux Input
(Stereo RCA)
Optical Input located on side:
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls located here:
Power Button
Input Button
Volume Up/Down Buttons
Indicator LEDs
Download from Www.Somanuals.com. All Manuals Search And Download.
FIRST-TIME SETUP
BOTTOM OF SOUND BAR
1
GOOD
BETTER
BEST
3.5MM TO RCA
CABLE
DIGITAL OPTICAL
CABLE
3.5MM TO RCA
CABLE
CHOOSE ONE CABLE:
GOOD
BETTER
BEST
AND CONNECT IT TO YOUR TV*
Download from Www.Somanuals.com. All Manuals Search And Download.
*Not all TVs have the audio outputs shown above.To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Sound Bar is centered
When
using
the
below the TV.
remote,point it at the
center of the Sound
Bar. The sensor is
located there.
For the best surround sound experience, position the Sound Bar as shown.*
The Sound Bar should be close to ear level.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Gently pull the plastic tab from
the back of the remote control.
(The plastic tab can be thrown away)
7
Power
Turn your TV on, then press the Power button on
the remote to turn the Sound Bar on.
MUTE SUB+
SUB-
Press the Input button to cycle through the audio
inputs. For example, if you connected your TV to
Aux 1, set the Sound Bar to Aux 1.
Setup is complete.
SRS
TVOL
SRS
TSHD
Input
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE
Power
Press to turn on or off.
Volume Up
Press to increase volume.
Mute
Press to mute.
SUB +
MUTE SUB+
SUB-
Press to increase subwoofer volume.
SUB -
Press to decrease subwoofer volume.
Volume Down
Press to decrease volume.
SRS TruVolume
SRS TruSurround HD
Press to enable/disable SRS
TruSurround HD.
Press to enable/disable SRS TruVolume.
SRS
TVOL
SRS
TSHD
Input
Press to change input source.
When using the remote, point it at the center of the Sound Bar.The sensor is located there.
If your remote stops responding,you
may need to replace the battery.
To replace the battery, insert a
flat-head screwdriver into the slot
as shown. Gently push down on the
tab, then press and pull downward
on the battery cover to open.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDICATOR LEDS
Indicator LEDs located here:
Indicator LEDs flash according
to input selection:
Optical - Input 3*
AUX - Input 2
AUX - Input 1
Download from Www.Somanuals.com. All Manuals Search And Download.
*Rapid flash indicates incompatible source or file format. If there is no sound output, see Help & Troubleshooting page.
Indicator LEDs located here:
When the four center
Indicator LEDs are brightly
lit, the selected SRS mode is
enabled.When the LEDs are
not lit, SRS mode is disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL MOUNTING THE SOUND BAR
Place the included wall mounting
template against the wall under your
TV. Mark the locations of the 4 bracket
holes using a pencil.
1
32.24’’/ 819mm
2
Be sure your screws are attached
to wood studs or drywall anchors
(for drywall) or concrete anchors
(for brick/concrete walls).
Screws for attachment to the wall are not included.
Choose the screw type and length appropriate
to your home’s construction. If in doubt, consult a
professional installer.
If you are unfamiliar with power tools or the layout of electrical
wiring in the walls of your home, consult a professional installer.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO RECOMMENDS
The VIZIO Co-Star™ Stream Player merges live TV and streaming entertainment into one experience,
turning any HDTV into the ultimate smart TV. Using the latest version of Google TV™, Co-Star decks out
your existing HDTV with apps, full-screen Web browsing and the best in streaming entertainment.And
with 1080p Full HD resolution, built-in Wi-Fi, and 3D-readiness,VIZIO Co-Star is the ultimate entertainment
upgrade for any high-definition television.
Download fromAWvwawi.lSaombalenuaalst.cowmw. Awll M.VanIZuaIOls S.ceaorcmh And Download.
This Product Sold Separately
HELP & TROUBLESHOOTING
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
• Ensure the light on the power adapter is glowing green.
There is no
power.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• Increase the volume. Press Volume Up on the remote control.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote to select a different input source.
• If you are using the 3.5mm output from your TV, be sure that is connected to an audio
output and not audio input. Some TVs use 3.5mm audio input for devices such as
computers.
There is no
sound.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set
to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed
information.
• If you are using a SPDIF/Optical connection, make sure your TV is set to PCM audio output.
• Ensure all cables and wires are securely connected.
I hear buzzing or
humming.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it
does not, the problem may be with the original device.
• Connect your device to a different input on the Sound Bar.
I want to return
my Sound Bar to
factory settings.
• Press and hold the INPUT and Vol - buttons on the Sound Bar for 3 seconds to return it to its
factory default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety
(90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period,VIZIO will either repair or replace the Product at its
sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: [email protected] or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM Monday
VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.Replacement parts and Products may be new or recertified atVIZIO’s option and sole discretion.Replacement
parts and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service.VIZIO is not responsible for transportation costs to the service center,but VIZIO will cover return
shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection.VIZIOTechnical
Support will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship.This warranty does not cover,for example:cosmetic damage,normal wear and tear,improper
operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as
installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or
requiring routine maintenance are not covered.This one year limited warranty does not cover Products sold“AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE
DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
SPECIFICATIONS
Sound Bar: Two 2-3/4”High-Efficiency
Full-Range Transducers
Frequency Response 90 Hz - 19.5 KHz
(Sound Bar):
Voltage: 110-240 VAC, 50-60 Hz
Dimensions (Sound Bar): 40.72”W x 3.28”H x 2.50”D
Net Weight (Sound Bar): 5.7 lbs
Inputs: 1 x 3.5mm Stereo Audio
1 x RCA Stereo Audio Pair
1 x Optical Digital
Sound Pressure Level: 95 dB
Compliances: UL, FCC, cUL, NRCAN
Download from Www.Somanuals.com. All Manuals Search And Download.
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference,and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct
such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
SRS is a trademark of SRS Labs,Inc. SRS technologies
are incorporated under license from SRS Labs, Inc.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This product qualifies for ENERGY STAR in the“factory default”
setting and this is the setting in which power savings will
be achieved. Changing the factory default settings or
enabling other features will increase power consumption
that could exceed the limits necessary to qualify for ENERGY
STAR rating.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this
product contains electronic components and a battery, it must be disposed of separately from
household waste. Contact local authorities to learn about disposal and recycling options.
Download from Www.Somanuals.com. All Manuals Search And Download.
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly
trained and is based in the
United States.
We can help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Hours of operation:
Monday - Friday: 5 am TO
Saturday - Sunday: 8 am TO
9
pm (pST)
pm (pST)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
We speak English • Se habla Español • Nous parlons Français
© 2013 VIZIO INC.ALL RIGHTS RESERVED.
130207OC-NC
Download from Www.Somanuals.com. All Manuals Search And Download.
|