Vizio DVD Player SD4200KU User Manual

SD4200KU  
SDK790KU  
Owner’s Record  
The model number and serial number are on the back  
of your DVD Player. Record these numbers in the spaces  
belowRefer to these numbers whenever you  
communicate with your Toshiba dealer about this DVD  
Player.  
Model number:  
Serial number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one  
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third  
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination  
to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
Additional Safety Instructions  
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire  
or electric shock.  
16. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be  
placed on the apparatus.  
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.  
18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and  
serious damage to the apparatus.  
19. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal  
injury and apparatus malfunction.  
20. If the apparatus should smoke or smell,immediately disconnect the power cord from the wall outlet. Wait until the  
smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.  
21. While it is thundering, do not touch the connecting cables or the apparatus.  
22. Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.  
CAUTION:  
This Digital Video Disc Player employs a Laser System.  
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference  
Should the unit require maintenance, contact an authorized service location.  
Use of controls or adjustments or performance of procedures other than those specified herein may result in  
hazardous radiation exposure.  
To prevent direct exposure to laser beam, do not try to open the enclosure.  
Visible and invisible laser radiation when open and interlocks defeated.  
DO NOT STARE INTO BEAM.  
Location of the required label:  
CERTIFICATION:This product complies  
with FDA Rule 21 CFR Subchapter J in  
effect at date of manufacture.  
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of  
electric shock do not perform any servicing other than that contained in the operating instructions unless you are  
qualified to do so.  
Be aware that this equipment is still powered when in standby mode. To disconnect this equipment completely from the  
mains power, pull out the power plug from the wall outlet.  
The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.  
Environmental Information  
All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials;  
cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).  
Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company.  
Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old  
equipment.  
LASER  
Type  
Semiconductor laser  
InGaAIP(DVD)  
AIGaAs(CD)  
Wave length  
658 nm(DVD)  
790 nm(CD)  
Output Power  
10.0 mW(DVD)  
7.0 mW(VCD/CD)  
Beam divergence 60 degrees  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
CAUTION!  
WARNING:  
Do not use solvents such as benzene, thinner,  
commercially available cleaners, or anti-static sprays  
intended for analog discs. Since the optical unit  
(laser) of the DVD system operates at a higher  
power than regular DVD or CD players, cleaning  
CDs intended for DVD or CD players may damage  
the optical unit (laser). Therefore, refrain from using  
a cleaning CD.  
RISK OF ELECTRIC SHOCK!  
Never attempt to service this product yourself.  
Opening and removing the covers may expose you  
to dangerous voltage or other hazards. Failure to  
follow this WARNING may result in death or serious  
injury. Refer all servicing not specified in this manual  
to a Toshiba Authorized Service Center.  
Moisture Condensation  
Setup  
Moisture condensation damages the DVD player.  
Please read the following carefully. Moisture  
condensation occurs, for example, when you pour a  
cold drink into a glass on a warm day. Drops of water  
form on the outside of the glass. In the same way,  
moisture may condense on the optical pick-up lens  
inside this unit, one of the most crucial internal parts  
of the DVD player.  
Finding a suitable location  
-Place the set on a flat, hard and stable surface.  
-Do not place the set on a carpet.  
-Do not position the set on top of other equipment  
that might heat it up (e.g., receiver or amplifier).  
-Do not put anything under the set  
(e.g.CDs, magazines).  
-Install this unit near the AC outlet and where the  
AC power plug can be reached easily.  
If you use the DVD player in such a situation, it may  
damage discs and internal parts. Remove the disc,  
connect the power cord of the DVD player to the wall  
outlet, turn on the DVD player, and leave it for two or  
three hours. After two or three hours, the DVD player  
will have warmed up and evaporated any moisture.  
Keep the DVD player connected to the wall outlet  
and moisture condensation will seldom occur.  
Space for ventilation  
-Place the apparatus in a location with adequate  
ventilation to prevent internal heat build up. Allow at  
least 10 cm (4.0'') clearance from the rear and the  
top of the set and 5 cm (2.0'') from the left and right  
to prevent overheating.  
5cm (2.0")  
10cm (4.0")  
5cm (2.0")  
10cm (4.0")  
Region Codes  
This DVD player is designed to support the Region  
Management System. Check the regional code  
number on the disc package. If the number does  
not match the player' s region number (see table on  
page 4), the player may be unable to playback the  
disc.  
Avoid high temperatures, moisture, water and  
dust  
-Apparatus shall not be exposed to dripping or  
splashing.  
-Do not place any sources of danger on the  
apparatus (e.g., liquid filled objects, lighted candles).  
Tips:  
-It may not be possible to play CD-R/RW , DVD+R/  
RW , or DVD+R DL in all cases due to the type of  
disc or condition of the recording.  
-If you are having trouble playing a certain disc,  
remove the disc and try a different one. Improperly  
formatted disc will not play on this DVD Player.  
Cleaning discs  
Some problems occur because the disc inside the  
system is dirty (frozen picture, sound disruptions,  
picture distortions). To avoid these problems, discs  
should be cleaned on a regular basis.  
To clean a disc, use a micro fibre cleaning cloth  
and wipe the disc from the center to the edge in a  
straight line. Do not touch the playback side of the  
disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Discs that can  
be played  
Region  
U.S.A. and  
Canada regions  
ALL  
1
2
3
4
5
6
U.K.,  
Europe regions and  
Japan  
ALL  
ALL  
ALL  
ALL  
ALL  
Asia Pacific,  
Taiwan, Korea  
Australia,  
New Zealand,  
Latin America  
Russia and  
India regions  
China, Calcos Islands,  
Walls and Futuna  
Islands  
This product incorporates copyright protection tech-  
nology that is protected by method claims of certain  
U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses  
only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
Notes on copyright  
The unauthorized recording, use, distribution, or revision  
of television programs, videotapes, DVDs and other  
materials, is prohibited under the Copyright Laws of the  
United States and other countries, and may subject you  
to civil and/or criminal liability.  
Helpful hint: before making or changing any connections, make sure that all the devices are  
disconnected from the power outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Table of Contents  
Introduction  
SAFETY PRECAUTIONS  
IMPORTANT SAFETY INSTRUCTIONS  
Setup  
1
1-2  
3
Cleaning discs  
3
Moisture Condensation  
Region Codes  
Table of Contents  
3
3-4  
5
Connections  
Connecting to television  
6
7
7
8
Connecting to a Stereo System  
Connecting to a Digital AV Receiver  
Connecting the power cord  
Product Overview  
Front and Rear panels  
Remote Control  
9
10  
Getting Started  
Inserting Batteries  
11  
Finding your viewing channel  
Setting up Progressive Scan feature  
Setting the language  
11  
11-12  
12  
. Playback from Disc  
Playable discs  
12-13  
Playback Feature  
Starting disc playback  
13  
Basic playback control  
13-14  
14  
14-15  
15  
Operations for video playback (DVD/VCD/SVCD)  
Selecting various repeat functions  
Viewing the disc playback Information  
Special DVD Features  
15  
Special VCD and SVCD Features  
15  
Playing MP3/JPEG/Kodak picture CD  
16-17  
DVD Menu Options  
Using the Language setup menu  
Using the Video setup menu  
Using the Audio setup menu  
Using the Rating setup menu  
Using the Misc (Miscellaneous) setup menu  
Tray Lock  
17  
17-18  
18-19  
19-20  
20  
20  
Others  
Specifications  
21  
Troubleshooting  
Glossary  
22-23  
24  
Limited United States Warranty  
Canadian Warranty Information  
25  
26-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
IMPORTANT!  
-The progressive scan video quality is only  
possible when using Y, PB, PR and a progressive  
scan TV is required.  
Connecting to television  
A
Use the component video cables (red/blue/green) to  
connect the DVD player' s Y, PB, PR jacks to the  
corresponding Component video input jacks (or  
labeled as Y, Pb, Pr) on the TV (cable not supplied).  
Use the audio cables (white/red) to connect AUDIO  
OUT (L/R) jacks of the DVD player to the  
corresponding AUDIO IN jacks on the TV.  
Proceed to page 11 for detailed Progressive Scan set  
up.  
IMPORTANT!  
– You only need to make one video connection  
from the following options, depending on the  
capabilities of your television.  
– Connect the DVD player directly to the  
television.  
B
C
Using Composite Video Jack(CVBS)  
Using a RF modulator  
A
Use the composite video cable (yellow) to connect  
the DVD player' s VIDEO(CVBS) jack to the video  
input jack(or labeled as A/V in,Video In or  
Composite) on the TV(cable supplied).  
To hear the sound of this DVD player through your  
TV, use the audio cables(white/red)to connect  
AUDIO OUT(L/R)jacks of the DVD player to  
corresponding AUDIO IN jacks on the TV(cable  
supplied).  
IMPORTANT!  
-If your TV only has a single Antenna In jack (or  
labeled as 75 ohm or RF In), you will need an RF  
modulator in order to view the DVD playback on  
the TV.  
Use the composite video cable (yellow) to connect  
the DVD player' s VIDEO (CVBS) jack to the video  
input jack on the RF modulator (cable supplied).  
To hear the sound of this DVD player through your  
TV, use the audio cables(white/red) to connect  
AUDIO OUT (L/R) jacks of the DVD player to the  
corresponding AUDIO IN jacks on the RF modulator  
(cable supplied).  
Using Component Video Jacks(Y, PB, PR)  
A
B
C
Use the RF coaxial cable (not supplied) to connect  
ANTENNA OUT or TO TV jack on the RF modulator  
to the ANTENNA IN jack on the television.  
Connect the Antenna or Cable TV service signal to  
the ANTENNA IN or RF IN jack on the RF modulator.  
(It may have been connected to your TV previously.  
Disconnect it from the TV.)  
Helpful hint: Before making or changing any connections, make sure that all the devices are  
disconnected from the power outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a Stereo System  
Connecting to a Digital AV Receiver  
Stereo system has Dolby Pro Logic or Right/Left  
Audio In Jacks  
Receiver has a PCM, Dolby Digital or MPEG  
decoder  
A
B
C
Select one of the video connections (CVBS VIDEO IN  
or COMPONENT VIDEO IN)  
depending on the options available on your TV.  
Connect the COAXIAL jack of the DVD player to the  
corresponding Digital Audio In jack on your Receiver  
(cable not supplied).  
Set the DVD Player' s Digital Output to PCM or All  
depending on the capabilities of your Receiver (see  
page 19 {Digital Output}).  
A
B
Select one of the video connections (CVBS VIDEO  
IN or COMPONENT VIDEO IN)  
depending on the options available on your TV.  
Use the audio cables (white/red) to connect AUDIO  
OUT (L/R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on the stereo system.  
Tip:  
-If the audio format of the Digital Output does not  
match the capabilities of your receiver, the receiver  
will produce a strong, distorted sound or no sound at  
all.  
Helpful hint: Before making or changing any connections, make sure that all the devices are  
disconnected from the power outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting the power cord  
After everything is connected properly, plug in the AC  
power cord to the power outlet.  
Never make or change any connections with the  
power switched on.  
Helpful hint: Before making or changing any connections, make sure that all the devices are  
disconnected from the power outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Overview  
Front and Rear panels  
I/2ON/STANDBY  
-Turns the player on or switches it to  
standby mode  
Disc tray  
- Place a disc here  
B/X PLAY/ PAUSE  
-Starts or pauses playback  
çOPEN/CLOSE  
- Opens or closes the disc tray  
STOP  
- Stops playback  
Display  
- Shows information about the current status of the  
DVD Player  
IR Sensor  
- Points the remote control towards this sensor  
MAINS ~  
- Connects to a standard AC outlet  
AUDIO OUT (Left/Right)  
- Connects to Audio input of a TV, an amplifier,  
receiver or stereo system  
Y, PB, PR Component Video Out  
- Connects to Y, PB, PR input of a TV  
COAXIAL(Digital audio out)  
- Connects to coaxial Audio input of a digital audio  
equipment  
VIDEO Out (CVBS)  
- Connects to CVBS Video input of a TV  
DVD display  
The indicators vary depending on the kinds of disc you play.  
DVD video disc  
Chapter/Track  
VIDEO CD  
Audio CD  
•During playback:  
number indicator  
•During playback:  
Example  
•During playback:  
Example  
Example  
Some discs may only Some discs may only Some discs may only  
display chapter  
numbers.  
display track  
numbers.  
display track  
numbers.  
Multifunctional indicator (indicates  
operating status or messages, etc.)  
Power Off  
OPEN  
LOAD/CLOSE  
No disc  
Bad disc  
"----" may also appear in other  
situation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Overview  
Remote Control  
See the page in [ ] for details.  
[ 15 ]  
REMOTE SIGNAL EMITTER  
DISPLAY  
[ 11 ]  
-Displays information on  
-Point remote control to the sensor on  
the front panel  
TV screen during playback  
2
[ 11, 13 ]  
ON / STANDBY  
[ 13 ]  
OPEN/CLOSE  
-To switch the DVD player to ON or  
-Open/close the disc tray  
standby mode  
[ 13, 15, 19 ]  
-Selects numbered items in a menu  
Number Buttons  
[ 15 ]  
T - SEARCH  
-Start playback from a designated  
-Press to enter track/chapter/title  
numbers or password directly  
point  
[ 11, 17 ]  
SETUP  
-Enters or exits the system setup  
[ 13 ]  
+10 button  
menu  
-Press to enter number greater than 9  
-Press +10 button repeatedly to select  
10,20,30...etc  
   [ 14, 16, 17 ]  
-Cursor buttons for moving to the left  
/ right / up / down  
-To rotate the JPEG picture during  
playback  
[ 14, 15 ]  
MENU  
-Enters or exits the disc menu  
-Switches on or off the Playback  
Control (PBC) mode (for VCD 2.0 /  
SVCD only)  
STEP  
-Play video frame by frame  
[ 13, 14 ]  
-Starts or pauses playback  
[ 14 ]  
PLAY/PAUSE  
[ 12 ]  
OK  
-Acknowledge menu selection  
STOP  
-Stops play  
[ 15 ]  
RETURN  
-To go back to previous menu  
[ 15, 16 ]  
-Show title menu  
-Press to view a page of 9 thumbnail  
images during JPEG playback  
[ 15 ]  
SUBTITLE  
TITLE  
-To access subtitle language  
[ 15 ]  
ANGLE  
-Switch the camera angle during  
playback  
[ 15 ]  
AUDIO  
[ 14, 16 ]  
-Do a forward/reverse search  
F.R & F.F  
-Selects an audio setting (DVD) or an  
audio channel (VCD)  
[ 13, 15, 16 ]  
-Skip to previous / next chapter /track  
PREV & NEXT  
[ 14, 17 ]  
ZOOM  
-Enlarge a picture on the TV  
[ 14 ]  
REPEAT  
-Selects various repeat mode  
[ 15 ]  
-Repeats playback from point A to B on  
[ 16 ]  
RANDOM  
-Toggles between Normal and  
Random playback  
A-B  
a disc  
[ 14 ]  
PROG  
-To program playback or cancel the  
program playback  
[ 14 ]  
SLOW  
-Do a slow forward  
[ 14 ]  
CLEAR  
-Delete the mistyped entries or cancel  
some functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢈ0  
Getting Started  
and highest channels and may be called FRONT,  
A/V IN or VIDEO. See your TV' s manual for more  
details.  
Inserting Batteries  
Or, you may go to channel 1 on your TV, then  
press the Channel down button repeatedly until you  
see the Video In channel.  
Or, the TV remote control may have a button that  
chooses different video modes.  
Or, set the TV to channel 3 or 4 if you are using an  
RF modulator.  
C
If you are using external equipment, (such as  
audio system or receiver), turn it on and select the  
appropriate input source for the DVD player output.  
Refer to the equipment user’s manual for detail.  
A
B
Open the battery compartment.  
Insert two batteries type R03 or AAA, following the  
indications (+ / - ) inside the compartment.  
Close the cover.  
C
Setting up Progressive Scan feature  
CAUTION:  
Never throw batteries into a fire.  
Note:  
(For Progressive Scan TV only)  
The progressive scan display twice the number  
of frames per seconds than interlaced scanning  
(ordinary normal TV system). With nearly double  
the number of lines, progressive scan offers higher  
picture resolution and quality.  
- Be sure to use AAA size batteries.  
- Dispose of batteries in a designated disposal area.  
- Batteries should always be disposed of with the  
environment in mind. Always dispose of batteries in  
accordance with applicable laws and regulations.  
- If the remote control does not operate correctly, or if  
the operating range becomes reduced, replace batteries  
with new ones.  
- When necessary to replace batteries in the remote  
control, always replace both batteries with new ones.  
Never mix battery types or use new and used batteries  
in combination.  
- Always remove batteries from remote control if they  
are dead or if the remote control is not to be used for an  
extended period of time. This will prevent battery acid  
Before you start...  
-Ensure that you have connected this DVD player  
to a progressive scan TV using the Y, PB, PR  
connection (see page 6).  
-Ensure that you have completed the basic  
installation and set up.  
Turn on your TV and select the video input  
connected to the DVD player (refer to your TV user  
manual).  
Press I/2ON/STANDBY on the remote control to  
turn on the DVD player.  
A
B
from leaking into the battery compartment.  
The blue DVD background screen will appear on  
the TV.  
Press SETUP.  
Using the Remote Control to Operate  
the System  
C
D
Press /to select { Video }, then press .  
Aspect Ratio  
View Mode  
: 4:3  
Language  
Video  
:Auto Fit  
30  
30  
Video Out  
Component  
P-Scan  
Within about 6m (19 feet)  
Smart Picture  
JPEG Interval  
Audio  
OPEN/CLOSE DISPLAY  
ON/STANDBY  
1
4
2
5
3
6
Rating  
Misc  
A
B
Aim the Remote Control directly at the remote sensor  
(IR) on the front panel.  
Do not put any objects between the Remote Control  
and DVD Player while operating the DVD Player.  
E
F
Press /to select { Video Out }, then press .  
Select { P- Scan }, then press OK to confirm.  
The menu will appear on the TV.  
Video Out  
Activating Progressive Scan 1. Ensure  
your TV supports Progressive Mode  
2. If there is a distorted picture on the  
TV, wait 15 seconds for automatic  
recover  
Finding your viewing channel  
A
B
Press I/2ON/STANDBY on the DVD player to turn it  
on.  
Turn on the TV and set it to the correct video-in  
channel. You should see the blue DVD background  
screen.  
Yes  
No  
Usually these channels are between the lowest  
Helpful hint: Press to go back to previous menu item.  
Press SETUP to exit the menu item.  
ꢈꢈ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started/Playback from disc  
on the disc, the disc’s default language will be used  
instead.  
G
Press to highlight { Yes } and press OK to confirm.  
The reconfirmation menu will appear on the TV.  
Video Out  
OSD language : English  
Language  
Confirm again to use new setting  
14 Seconds  
Subtitle  
: Auto  
Video  
Audio  
English  
Audio  
DVD Menu  
French  
Yes  
No  
Spanish  
Rating  
Misc  
H
A
Press to highlight { Yes } and press OK to confirm.  
The setup is now completed and you can start  
enjoying the high quality picture.  
To deactivate Progressive Scan  
manually:  
Wait for 15 seconds for the auto recovery.  
A
B
C
Press SETUP.  
Press /to select { Language }, then press .  
Press /to highlight one of the options below,  
then press .  
OR  
{ Subtitle }  
Select this to change the subtitle language.  
{ Audio }  
Select this to change the disc soundtrack language.  
{ DVD Menu }  
A
B
Press OPEN/CLOSE çon the DVD player to open  
the disc tray.  
Press number button ' 1 ' on the remote control for a  
few seconds.  
Select this to change the language of the disc menu.  
Use /to select a language and press OK to  
confirm.  
The DVD background screen appears.  
Tip:  
D
E
-There are some progressive scan TVs and High-  
Definition TVs that are not fully compatible with this  
unit, resulting in the unnatural picture when playing  
back a DVD VIDEO disc in the progressive scan  
mode. In such a case, turn off the progressive scan  
feature on both the DVD player and your TV.  
Repeat steps C - D for other language settings.  
IMPORTANT!  
- DVD discs and players are designed with regional  
restrictions. Before playing a disc, make sure the  
disc is for the same zone as your player.  
- If '  
'appears on the TV screen when a button is  
pressed, it means the function is not available on  
the current disc or at the current time.  
Setting the language  
Choose your desired On-Screen Display(OSD)language  
including English, French and Spanish.  
Playable discs  
On-Screen Display (OSD) Language  
Using this DVD player, you can playback on the  
following discs. Some of these discs may be  
incompatible.  
The On-screen language for the system setup menu  
will remain as you set it, regardless of various disc  
languages.  
DVD Video disc(Digital Versatile Disc)  
OSD language  
Subtitle  
English  
Language  
Français  
Español  
Video  
Audio  
DVD+R/RW (DVD Recordable / Re-  
writable), DVD+R DL (Dual layer) of  
DVD Video format or Audio/Video  
formats (e.g., MP3 and JPEG files).  
DVD Menu  
: English  
Audio  
Rating  
Misc  
A
B
C
Press SETUP.  
Press /to select { Language }  
Press to highlight { OSD language }, then press  
.  
CD-R (CD-Recordable)  
Audio/Video formats (e.g., MP3 and  
JPEG files).  
D
Press /to select a language and press OK to  
confirm.  
CD-RW (CD-Rewritable)  
Audio/Video formats (e.g., MP3 and  
JPEG files).  
Audio, Subtitle and DVD menu  
language  
You can choose your own preferred language or  
soundtrack from audio, subtitles and DVD menu  
languages. If the language selected is not available  
Audio CD (Compact Disc  
Digital Audio)  
Helpful hint: Press to go back to previous menu item.  
Press SETUP to exit the menu item.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢈꢀ  
Playback from disc/Playback Feature  
– For DVD+R and DVD+RW multi border, both  
Video CD  
finalized and unfinalized disc cannot be supported.  
(Formats 1.0, 1.1, 2.0)  
Starting disc playback  
Super Video CD  
MP3-Disc  
A
Turn on the TV and select the video input connected  
to the DVD player.  
B
C
D
Press I/2ON/STANDBY to turn on the DVD player.  
Press OPEN/CLOSE to open the disc tray.  
Place a disc onto the disc tray with the label facing  
up, then press OPEN/CLOSE.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
Because of problems and errors that can occur  
during the creation of DVD and CD software and/or  
the manufacture of DVD and CD discs, Toshiba  
cannot assure that this DVD player will successfully  
play every disc bearing the DVD and CD logos. If you  
happen to experience any difficulty playing a DVD  
and/or CD disc on this DVD player, please contact  
Toshiba Customer Service.  
For double-sided discs, load the side which you  
want to play facing up.  
Playback may start automatically. If not, press PLAY/  
E
PAUSE  
.
If a disc menu appears on the TV, see page 14  
'Using the disc menu'.  
If the parental control was activated for the  
inserted disc, you have to enter your four-digit  
This DVD player requires discs/recordings to meet  
certain technical standards in order to achieve  
optimal playback quality. There are many different  
types of recordable disc formats (including CD-R  
containing MP3 files). Not all recordable discs will  
operate or produce optimal playback quality. The  
technical criteria set forth in this owner's manual are  
meant only as a guide. Use of CD-RW for MP3 files  
is not recommended.  
password, see page 19.  
For more playback features, see pages 13 - 17.  
Tips:  
-Do not overturn the DVD player while disc loading,  
playing or ejecting.  
-Do not close the disc tray manually even if the  
power is switched off.  
Basic playback control  
You must obtain any required permission from  
copyright owners to download or use copyrighted  
content. Toshiba cannot and does not grant such  
permission.  
Unless otherwise stated, all operations described are  
based on Remote Control use.  
Pausing playback  
Supported Formats  
A
B
During playback, press PLAY/PAUSE  
playback and display a still picture.  
to pause  
MP3 tracks  
Sound will be muted.  
To resume normal playback, press PLAY/PAUSE  
again.  
-The file extensions has to be '.mp3 '.  
-JPEG/ISO format.  
-Maximum 8 characters display for folder name.  
-Maximum 15 characters display for file name.  
-Supported sampling frequencies & corresponding  
bit-rates;  
Skipping chapter/track  
Press PREV  
/ NEXT  
to go to the previous  
32kHz, 64-320 kbps  
or next chapter/track during playback.  
44.1kHz, 48kHz 80-320 kbps  
JPEG/Pictures  
-The file extensions has to be '.JPG ' and not  
'.JPEG' .  
-JPEG/ISO format.  
When PREV  
is pressed after the 5 seconds  
of playback, playback will start from the beginning  
of the current chapter/track. If you press the button  
within the 5 seconds, playback will start from the  
beginning of the preceding chapter/track.  
-Maximum of 5760×3840 resolution can be  
supported.  
-Maximum file size: 10M.  
-Maximum of 500 files and 200 folders are  
supported.  
-When the number of files(or folders) reaches the  
maximum limit, the rest of the files(or folders) cannot  
be displayed.  
Press DISPLAY to display the disc  
information for title/chapter/track.  
Use Number buttons to enter valid chapter / track  
number directly. For the track/chapter numbers which  
are greater than 9, use +10button. Each  
presses increases the number by 10. Then press the  
second digit of track/Chapter number.  
The playback skips to the selected chapter / track.  
Tip:  
- For VCD 2.0 / SVCD discs, accessing tracks using  
number buttons is not possible if the PBC mode is  
turned on.  
-It can only display DCF-standard still pictures or  
JPEG pictures such as TIFF.  
Tips:  
– Maximum 100 sessions for CD and 10 multi border  
for DVD are supported.  
– For DVD-R and DVD-RW multi border, only  
finalized disc can be supported.  
Helpful hint: Some discs cannot be played on this DVD player due to the configuration and characteristics  
of the disc, or due to the condition of recording and authorizing software  
ꢈꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Feature  
Stopping playback  
ybac  
Operations for video playback (DVD/  
VCD/SVCD)  
During playback, press STOP  
.
A
The DVD player memorises the stopped point.  
Press PLAY/ PAUSE  
location where you stopped playback.  
If you press STOP  
again, the DVD player will  
to resume playback from the  
Using the disc menu  
Depending on the disc, a menu may appear on the  
TV screen once you load in the disc.  
cancel the resume function.  
Tips:  
To select a playback feature or item  
Use /or number buttons on the remote control,  
then press OK to start playback.  
To access or remove the menu.  
Press MENU on the remote control.  
-Screen saver will start automatically if the disc  
playback is stopped for about 2 minutes.  
-The player will automatically switch to Power  
Standby mode if you do not press any buttons for  
about 22 minutes after the disc has stopped playing.  
Zooming In  
Program playback  
This function allows you to enlarge the picture on the  
TV screen and to pan through the enlarged picture.  
During playback, press PROG, then the OSD will  
appear as below:  
A
B
During playback, press ZOOM repeatedly to display  
the picture with different scales.  
For VCD:  
Program  
Use ///to pan through the enlarged picture.  
Playback will continue.  
Press ZOOM repeatedly to return to the original size.  
1
2
Track  
Track  
Track  
Track  
1
2
3
4
3
4
5
6
Slow Motion  
7
8
9
10  
12  
14  
16  
11  
13  
15  
Track  
Track  
5
6
A
B
Press SLOW during playback to select the required  
speed: 1/2, 1/4, 1/8( forward only ).  
Sound will be muted.  
To return to normal speed, press PLAY/ PAUSE  
.
Clear  
Play  
Clear All  
Forward/ Reverse Searching  
For DVD:  
Program  
You can fast forward or fast reverse a disc during  
playback and select a desired search speed.  
For DVD,VCD, SVCD,CD, MP3  
1
2
Title  
Title  
Title  
Title  
1
2
3
4
3
4
5
6
A
B
During playback, press F.R/ F.F to select the required  
speed: X2, X8, X30, X100(backward or forward).  
7
8
9
10  
12  
14  
16  
11  
13  
15  
Sound will be muted (DVD/VCD/SVCD/MP3) or  
intermittent (CD).  
To return to normal speed, press PLAY / PAUSE  
.
Clear  
Play  
Clear All  
Selecting various repeat functions  
Repeat play mode  
A
B
Use the /and OK button to select your desired  
title/chapter/track in the list.  
When you have finished programming, press to  
move the cursor to the 'Play', then press the OK  
button or directly press PLAY/PAUSE  
start the program playback.  
Press CLEAR or select ' Clear ' to delete one by one  
from last chosen track / title /chapter or select 'Clear  
All' to clear all the programmed tracks/titles/chapters.  
Press STOP twice to cancel program playback.  
button to  
The repeat play options vary depending on the disc  
type.  
C
D
A
While playing a disc, press REPEAT repeatedly to  
choose a repeat options.  
For DVD  
-Repeat Chapter (currently playing chapter)  
-Repeat Title (currently playing title)  
-Off (cancel)  
For Video CD, Audio CD  
-Repeat Single (currently playing track)  
-Repeat All (entire disc)  
-Off (cancel)  
For MP3, JPEG  
Helpful hintThe operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢁ  
Playback Feature  
-Repeat Single (currently playing file)  
-Repeat All (current folder)  
-Off (cancel)  
B
C
Use the number buttons ( 0-9 ) to input a valid  
number or time ("0" cannot be input as the first  
number). (This function only apply to DVD/VCD/CD/  
SVCD.)  
Press OK to confirm.  
The playback skips to the selected title/chapter/  
track/time.  
Tip:  
-For VCD2.0/SVCD discs, repeat playback is not  
possible if the PBC mode is turned on.  
Repeating a section within a title/track  
You can repeat the playback of a specific segment  
within a title or track. To do this, you must mark the  
start and end of the segment you want.  
Angle  
When {Angle} information appears on the screen,  
press ANGLE button on the remote control  
repeatedly to switch between different angles.  
Playback will go to the selected angle.  
A
B
While playing a disc, press A - B at your chosen  
starting point.  
Press A - B again at your chosen end point.  
Special DVD Features  
The section will now repeat continuously.  
C
To exit the sequence, press A - B.  
Playing a Title  
Viewing the disc playback Information  
Press TITLE.  
A
The disc title menu appears on the TV screen.  
Use /or number buttons (0-9) to select a play  
option.  
You can view the disc information (such as current  
title/chapter/track number, total playing time or  
remaining time on the disc) without interrupting the  
disc playback.  
B
C
Press OK to confirm.  
Changing the Audio Language  
A
During playback, press DISPLAY repeatedly on the  
remote control.  
The available disc information appears on the TV  
screen with the following sequence.  
For DVD:  
Press AUDIO repeatedly to select different audio  
languages.  
(DVD)  
(DVD)  
(DVD)  
(DVD)  
DVD Video  
Time  
Changing the Audio Channel  
For VCD:  
Press AUDIO to select the available audio channels  
Time  
000333/012446  
Title  
provided by the disc (Left, Right, Mix, Stereo).  
Title 1/1  
Chapter  
Chapter 2/8  
Audio  
Subtitles  
Press SUBTITLE repeatedly to select different  
subtitle languages.  
Audio 1/1  
6Ch Eng  
(DVD)  
(DVD)  
Subtitle  
Subtitle  
Special VCD and SVCD Features  
1/8 Eng  
Angle  
Angle 1/4  
VCD2.0  
Time  
Time  
(DVD)  
(VCD)  
For VCD with Playback Control ( PBC ) feature  
(version 2.0 only)  
Press MENU to toggle between ' PBC On ' and '  
PBC Off '.  
If you select ' PBC On ', the disc menu ( if  
available ) will appear on the TV.  
(VCD)  
000333/000500  
Track  
Track  
3/24  
(VCD PBC OFF)  
OR  
Time  
Use the number buttons ( 0-9 ) to select a play  
option.  
(VCD PBC ON)  
(VCD PBC ON)  
Time  
000333/000500  
Press PREV  
or next track.  
When PREV  
/ NEXT  
to go to the previous  
PBC On  
Title/Chapter/Track/Time selection  
is pressed after the 5 seconds  
of playback, playback will start from the beginning of  
the current track. If you press the button within the 5  
seconds, playback will start from the beginning of the  
preceding track.  
A
Press T-SEARCH, then press /to select  
{ Time }, { Title }, { Chapter } or { Track }.  
For VCD:  
PBC OFF  
Track  
---  
During playback, pressing RETURN will return to  
the menu screen (if PBC is on).  
If you want to skip the index menu and playback  
directly from the beginning.  
Time  
--:--:--  
--:--:--  
(desired time of the current track)  
(desired time of the disc)  
Disc Time  
For DVD:  
Title  
---  
---  
Press MENU on the remote control to turn the PBC  
off.  
Chapter  
Time  
--:--:--  
(desired time of the disc)  
Helpful hintThe operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
ꢀꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Feature  
C
Select Add To Program in the toolkit then press  
OK. ' ' will disappear from screen. It means that the  
files/tracks you have selected already added into the  
Program View list.  
Playing MP3/JPEG/ Kodak picture CD  
D
E
Select Program View in the toolkit then press OK to  
open the file/track in the Program View list that you  
already selected in step B.  
IMPORTANT!  
You have to turn on your TV and set to  
the correct Video In channel. (See page  
11, ‘ Finding your viewing channel ‘ ).  
Press PLAY / PAUSE  
to playback all files/tracks  
in the Program View list.  
General Operation  
A
Load a disc.  
Filter  
The disc reading time may exceed 30 seconds  
due to the complexity of the directory/file  
configuration.  
The data disc menu and ID3 (MP3) information  
(including at least title, singer and album) appears  
on the TV screen.  
The Toolkit has the following play mode items:  
Filter ( Audio/Photo/Video ): Sets file filters  
(Filter is not applicable to Audio CD.)  
Repeat (Off/Single/ All):  
Filter  
Off:  
Resumes normal playback  
Single: Repeats the current track/file.  
All:  
Repeats all files on the current folder or all  
tracks on the disc.  
Mode(Normal/Random)  
This mode can also be toggled by using RANDOM  
button.  
Normal: Resumes normal playback  
Random: Playbacks track/file in random order.  
B
Press / to select the folder and press OK to  
open the folder.  
Press / to select a track/file.  
Press OK to confirm.  
C
D
Tips:  
During MP3/CD-DA/JPEG files playback;  
- If Repeat All and Random are selected, all the  
tracks will be played randomly and endlessly.  
- If Repeat Single is selected, Random cannot be  
selected.  
- If you highlight on a jpeg file, a preview will appear.  
- During MP3 playback, the LED will display the track  
number.  
- During JPEG playback, the LED will display the file  
number.  
- If Random is selected, Repeat Single cannot be  
selected.  
Playback Selection  
During playback, you can;  
Edit Mode: Program operation works only when  
Edit Mode is selected. After finished storing the files/  
tracks you want into the Program View list, select  
“Edit Mode” again and press OK to release edit  
mode.  
Press PREV  
/ NEXT  
to select the  
previous/next track/file in the current folder.  
Press PLAY/PAUSE  
resume playback.  
For MP3  
repeatedly to pause/  
Program View: To view tracks/files in the  
Program View list. It is disabled if the Program View  
list is empty.  
Within the 5 seconds, press PREV  
to go  
Add To Program: Add files/tracks to the Program  
View list. It is disabled if Edit Mode is not selected.  
(The maximum number of files/tracks can be added  
is 30.)  
back to the previous track.  
After the 5 seconds of playback, press PREV  
to go back to the beginning of current track.  
During playback, press  
forward or fast reverse with the required speed: X2,  
X8, X30, X100.  
/
to access fast  
Browser View: To view files/tracks in the Original  
View list.  
Clear Program: Delete the files/tracks in the  
Program View list.  
Play modes for MP3/Audio CD/JPEG  
Select a file/track or more you want to delete in  
stop mode.' ' will appear besides the deleted file/  
track.Select Clear Program and then press OK . It is  
disabled if Edit mode is not selected.  
You are able to modify the play modes through the  
toolkit which appears on the right of below picture  
on the screen. Press / to navigate between the  
windows and / buttons to select files/ tracks or  
play mode items. Then press OK . Please refer to  
below steps to playback files /tracks in the Program  
View list:  
Preview ( JPEG)  
During playback, press TITLE to view a page of 9  
thumbnail images.  
A
B
Select Edit Mode in the toolkit then press OK to  
start edit mode.  
Use / / / to select an image.  
Select a file/track or more files/tracks you want in the  
original view list.  
Press OK to view the selected image in full-screen  
and subsequent images will be displayed one after  
Helpful hintThe operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢈꢄ  
DVD Menu Options  
another automatically. See page 18 for JPEG Interval  
setting.  
you selected. A prior subtitle language may be  
programmed on the disc.  
-Some DVD video discs allow you to change subtitle  
selections only via the disc menu. If this is the case,  
press the MENU button and choose the appropriate  
subtitle language from the selection on the disc  
menu.  
Press PREV  
or next thumbnail screen.  
/ NEXT  
to view the previous  
Zoom picture ( JPEG)  
During playback, press ZOOM repeatedly to  
display the picture with different scales.  
-Some DVD video discs may not be played in a  
different audio language that you selected. A prior  
language may be programmed on the disc.  
-Some DVD discs may not include your pre-selected  
language . In this case, the DVD player  
automatically displays discs menus consistent with  
the disc’s initial language setting.  
Use / / / to view the zoomed picture.  
Rotate picture (JPEG)  
During playback, press / / / to rotate the  
picture on the TV screen.  
/ flip the picture vertically by 180º  
rotate the picture anti-clockwise by 90º  
rotate the picture clockwise by 90º  
Tips:  
-It may not be possible to play certain MP3/JPEG  
disc due to the configuration and characteristics of  
the disc or condition of the recording.  
Using the Video setup menu  
A
Press SETUP on the remote control.  
The system setup menu appears.  
This DVD Player setup is carried out via the TV,  
enabling you to customise the DVD player to suit  
your particular requirement.  
Language  
4:3  
Aspect Ratio  
View Mode  
Video Out  
:
:Auto Fit  
:Component  
:Standard  
Video  
Audio  
Smart Picture  
JPEG Interval  
:5 Seconds  
Using the Language setup menu  
Rating  
Misc  
A
Press SETUP on the remote control.  
The system setup menu appears.  
OSD language  
Subtitle  
:English  
:Auto  
Language  
B
C
Press / to select { Video }, then press   
Press / to select an item, then press to  
access.  
Video  
:
:
Audio  
English  
English  
DVD Menu  
Audio  
Example: { Video Out }  
Rating  
Misc  
The options for the selected item appears.  
If the selection in the menu is greyed out, that  
means the feature is not available or not possible to  
change at the current state.  
Use / to select a setting and press OK to  
confirm.  
B
C
Press / to select {Language }, then press .  
Press / to select an item, then press to  
access.  
D
E
Example: { P-Scan }  
Example: { OSD language }  
The setting is selected and setup is completed.  
To exit, press SETUP.  
The options for the selected item appears.  
If the selection in the menu is greyed out, that  
means the feature is not available or not possible to  
change at the current state.  
Aspect Ratio  
The picture shape can be adjusted to fit your TV and  
the format must be available on the playback disc.  
Otherwise, the TV display will not affect the picture  
during playback.  
In ' Video ', press / to select {Aspect Ratio },  
then press .  
D
E
Use /to select a setting and press OK to  
confirm.  
Example: { English }  
The setting is selected and setup is completed.  
To exit, press SETUP.  
A
OSD Language  
{ 4:3 }  
Select this if you have a normal TV. A 'wide-screen'  
source display with black bars on the top and bottom  
This menu contains various language options for the  
language displayed on the screen.  
will be displayed on the TV screen.  
{ 16:9 }  
Subtitle/Audio/DVD Menu  
Select this for wide-screen TV (frame ratio 16:9).  
Use / to select a setting and press OK to  
confirm.  
These menus contains various language options  
for audio, subtitle and DVD menu which may be  
recorded on the DVD.  
B
Tips:  
-Some DVD video discs may be set to display  
subtitles in a different language other than  
Helpful hint: Press to go back to previous menu item.  
Press SETUP to exit the menu item.  
ꢈꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options  
C
If you select { Personal }, then proceed to steps  
D~G.  
View Mode  
Use view mode to scale an image that fits to the TV  
screen's width and height.  
In ' Video ', press / to select { View Mode },  
then press .  
The setup menu appears.  
0
A
Brightness  
0
Contrast  
0
Tint  
{ Fill }  
0
Color  
Fill the screen with decoded image.  
{ Original }  
Close  
Display image as its original size.  
D
Press / to highlight one of the following options.  
Brightness  
{ Height Fit }  
Increase the value to brighten the picture or vice  
versa. Choose zero (0) for average setting.  
Contrast  
Increase the value to sharpen the picture or vice  
versa. Choose zero (0) to balance the contrast.  
Tint  
Increase the value to darken the picture or vice  
versa. Choose zero (0) for average setting.  
Color  
Increase the value to enhance the color in your  
picture or vice versa. Choose zero (0) to balance the  
color.  
Press / to adjust the setting that best suits  
your personal preference.  
Repeat steps D~ E to adjust your picture  
preference.  
Press / to select Closeand press OK to  
confirm.  
Fit the screen height with image height.  
{ Width Fit }  
Fit the screen width with image width.  
{ Auto Fit }  
Automatically display the decoded image on screen  
at a suitable size.  
{ Pan Scan }  
Automatically display decoded image on full screen  
without distortion.  
Use / to select a setting and press OK to  
confirm.  
Tip:  
-Depending on the type of disc, you may not be able  
to view the mode as selected.  
B
A
B
E
F
G
Video Out  
The video output of the DVD player can be selected  
as “ Component “ or “ P-Scan”.  
In Video, press / to select { Video Out },  
then press .  
{ Component }  
Select this for Video(CVBS) or component video  
connection.  
{ P-Scan }  
Select this when you connect your DVD player to  
your TV, which has component video inputs that  
supports progressive scan.  
Use / to select a setting and press OK to  
confirm.  
If the progressive scan feature is activated but  
the connected TV does not support progressive  
scan, press number button “1” with the disc tray  
opened to set the video output of the DVD player to  
“Component”.  
JPEG Interval  
You can continuously playback all JPEG files  
automatically. Set “JPEG Interval” to “5 Seconds”,  
“10 Seconds” or “15 Seconds”.  
In ' Video ', press / to select { JPEG Interval },  
then press .  
A
{ Off }  
Plays back one file at a time.  
{ 5 Seconds }  
Plays back images in the form of a slide show at 5  
seconds intervals.  
{ 10 Seconds }  
Plays back images in the form of a slide show at 10  
seconds intervals  
{ 15 Seconds }  
Plays back images in the form of a slide show at 15  
seconds intervals  
Smart Picture  
This DVD player provides four predefined sets of  
picture color settings.  
In ' Video ', press / to select {Smart Picture },  
then press .  
B
A
Use / to select a setting and press OK to  
confirm.  
A
Using the Audio setup menu  
{ Standard }  
Select this for a preset standard picture setting.  
{ Vivid }  
Press SETUP on the remote control.  
The system setup menu appears.  
Select this to make the picture brighter.  
{ Cool }  
Digital Output  
: All  
:Off  
: On  
:Off  
Language  
Select this to make the picture softer.  
Night Mode  
Down Sampling  
Video  
{ Personal }  
Select this to personalize your picture color by  
adjusting the brightness, contrast, tint and color  
3D Effects  
Audio  
Rating  
(saturation).  
B
Use / to select a setting and press OK to  
Misc  
confirm.  
Helpful hint: Press to go back to previous menu item.  
Press SETUP to exit the menu item.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢈꢆ  
DVD Menu Options  
{ On }  
B
C
Press / to select { Audio }, then press .  
Press / to select an item, then press to  
access.  
If your amplifier / decoder is not compatible with 96  
KHz PCM, select “ On “ . Sound recorded at 96 KHz  
is down sampled to 48 KHz.  
Use / to select a setting and press OK to  
confirm.  
Example: { Night Mode }  
B
The options for the selected item appears.  
If the selection in the menu is greyed out, that  
means the feature is not available or not possible to  
change at the current state.  
Use / to select a setting and press OK to  
confirm.  
Tip:  
- When playing back disc with copyright protection,  
the sound will be down sampled to 48 KHz even  
when you select Down Sampling off.  
D
E
Example: { On }  
3D Effects  
The setting is selected and setup is completed.  
To exit, press SETUP.  
To obtain expansive virtual surround sound effects  
from two speakers, set 3D Effects to on. This  
enhancement sounds only output from the Analog  
AUDIO OUT (L / R) jacks of the DVD player.  
In 'Audio', press / to select { 3D Effects }, then  
press .You can set to { Off } or { On }.  
Use / to select a setting and press OK to  
confirm.  
Digital Output  
Select this if you connect to a multichannel decoder/  
receiver.  
In 'Audio', press / to select { Digital Output },  
then press .  
A
B
A
{ All }  
Tip:  
Select this if the connected device has a built-in  
multichannel decoder that supports one of the  
multichannel audio format (Dolby Digital, DTS).  
{ PCM }  
- Only effective in playback of a DVD Video disc with  
Dolby Digital 5.1 bitstream.  
Select this if the connected device is not capable of  
decoding multichannel audio. The DVD player will  
convert the Dolby Digital signal to PCM (Pulse Code  
Modulation).  
Using the Rating setup menu  
A
Press SETUP on the remote control.  
{ Off }  
The system setup menu appears.  
To deactivate the digital audio output. For example, if  
you use the AUDIO OUT jacks to connect to a TV or  
stereo system.  
Parental control  
: 8.Adult  
Language  
Video  
Set Password  
B
Use / to select a setting and press OK to  
confirm.  
Audio  
Rating  
Tip:  
-When playing MPEG, MP3 and set Digital Output to  
{All}, the player will output PCM signals.  
Misc  
B
C
Press / to select {Rating }, then press .  
Press / to select an item, then press to  
access.  
Night Mode  
This mode optimizes playback of sound at low  
volume. High volume outputs will be softened and  
low volume outputs are brought upward to an audible  
level.  
In Audio, press / to select { Night Mode },  
then press .  
Example: { Parental control }  
The options for the selected item appears.  
If the selection in the menu is greyed out, that  
means the feature is not available or not possible to  
change at the current state.  
Use / to select a setting and press OK to  
confirm.  
A
{ On }  
D
E
Select this to set low volume output. This feature  
is only available for movie discs with Dolby Digital  
Example: { 8. Adult }  
mode.  
{ Off }  
The setting is selected and setup is completed.  
To exit, press SETUP.  
Turns off night mode feature. Select this to enjoy the  
Rating Level settings  
surround sound with its full dynamic range.  
Use / to select a setting and press OK to  
confirm.  
B
A
Depending on the DVD, you may be asked to  
change the parental level while playing the disc. The  
rating levels are from 1 to 8 and are country  
dependent. You can prohibit the playing of certain  
discs that are not suitable for your children, or have  
certain discs played with alternative scenes.  
In ' Rating ', press / to select {Parental control },  
then press .  
Down Sampling  
You can enable and disable the digital signal for  
better sound output quality.  
In Audio, press / to select { Down  
Sampling }, then press .  
{ Off }  
A
B
Use the number buttons to enter the four-digit  
password, then press OK.(See ‘Changing the  
Password’ on page 20.)  
If your amplifier / decoder is compatible with 96 KHz  
PCM, select “ Off “ . Sound is sampled at 96 KHz.  
Helpful hint: Press to go back to previous menu item.  
Press SETUP to exit the menu item.  
ꢈꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Menu Options  
C
Press OK again to list the parental level.  
{ 1.Kid Safe }  
Suitable for children.  
{ 2. G }  
Using the Misc (Miscellaneous) setup  
menu  
General Audience; recommended as acceptable for  
viewers of all ages.  
{ 3. PG }  
A
Press SETUP on the remote control.  
The system setup menu appears.  
Parental Guidance suggested.  
Use Default Settings  
Language  
Video  
{ 4. PG-13 }  
Unsuitable for children under 13.  
{ 5. PG-R }  
Audio  
Parental Guidance Recommended.  
Rating  
{ 6. R }  
Misc  
Restricted; under 17 requires accompanying parent  
or adult guardian.  
{ 7. NC-17 }  
No one under 17 admitted.  
{ 8. Adult }  
B
C
Press / to select { Misc }, then press .  
Press / to select an item, then press OK to  
access.  
Example: { Use Default Settings }  
DVD softwares of any grades (adult/general/children)  
can be played back. Should be viewed only by adults  
due to graphic sexual material, violence or language.  
Use / to select a rating level and press OK to  
confirm.  
The options for the selected item appears.  
If the selection in the menu is greyed out, that  
means the feature is not available or not possible to  
change at the current state.  
Use / to select a setting and press OK to  
confirm.  
D
D
E
Select { 8. Adult } to disable parental level and  
allow all discs to play.  
Example: { No }  
DVDs that are rated higher than the level you  
selected will not play unless you enter your four-digit  
password.  
The setting is selected and setup is completed.  
To exit, press SETUP.  
Restoring to original settings  
Tips:  
-This feature will not limit viewing if the disc  
manufacturer did not code the disc.  
-VCD, SVCD, CD have no level indication, so  
parental control has no effect on these type of discs.  
This also applies to most illegal DVDs.  
-Some DVDs are not coded with a rating though the  
movie rating may be printed on the disc cover. The  
rating level feature does not prohibit play of such  
discs.  
Setting the { Use Default Settings } function will reset  
all options and your personal settings to the factory  
defaults, except your password and rating level.  
In Misc, press / to select  
A
{ Use Default Settings }, then press OK.  
The menu will appear.  
Use Default Settings  
Changing the Password  
Yes  
No  
You need to enter your four-digit password to play a  
prohibited disc or if prompted for a password.  
In Rating, press / to select {Set Password  
}, then press OK.  
{ Yes }  
Select this to reset to factory default settings.  
{ No }  
A
B
Select this to close the menu.  
Use / to select a setting and press OK to  
confirm.  
You will be prompted to enter your four-digit  
password.  
B
Enter Password  
Tray Lock  
Use the number buttons ( 0-9 ) to enter the four-digit  
password.  
When doing this for the first time, enter the default  
password 0000 .  
If you forget your old four-digit password, enter the  
default password 0000.  
Press OK again to enter the new four-digit password.  
Press SETUP button, then press the number button  
"2006" in sequence to lock the tray.  
All functionality of the player and playback remain  
the same except for the OPEN/CLOSE button.  
After the tray is locked, "Tray Lock Is On" will  
appear on the screen when OPEN/CLOSE is  
pressed.  
C
D
The new four-digit password will now take effect.  
Enter New Password  
To unlock the tray, just follow the same procedure  
as above.  
Press OK to confirm.  
Helpful hint: Press to go back to previous menu item.  
Press SETUP to exit the menu item.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ0  
Specifications  
DVD Player/Outputs/Supplied Accessories  
DVD Player  
Power supply  
120 V AC, 60 Hz  
Power Consumption  
12W ( standby :<1W )  
Net weight  
1.45 kg  
External dismensions  
Signal System  
Laser  
430 X 43 X 209 mm (W/H/D)  
Standard NTSC  
Semiconductor laser, wavelength 650/780 nm  
Frequency range  
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz  
96 kHz sampling 4 Hz to 44 kHz  
Signal-to-noise ratio  
Audio dynamic range  
Harmonic distortion  
Wow and flutter  
More than 90 dB  
More than 80 dB  
Less than -65 dB  
Below measurable level [(less than 0.001 % ( W.PEAK )]  
O
O
Operating conditions  
Temperature : 5 C to 35 C Operation status :Horizontal  
Outputs  
Video output  
1.0 V ( p-p ) , 75 Ω negative sync., pin jack x 1  
Component video output  
(Y) 1.0 V (p-p), 75 Ω negative sync., pin jack x 1  
(P B)/(P R) 700 mV (p-p), 75 Ω, pin jack x 2  
Audio output ( COAXIAL DIGITAL ) 0.5 V (p-p) 75 Ω pin jack x 1  
Audio output (ANALOG)  
2.0 V (rms), 680 Ω, pin jacks (L/R) x 1  
Supplied Accessories  
Audio/Video cable  
Remote control(SE-R0301)  
Batteries(AAA)  
The model complies with the above specifications.  
Designs and specifications are subject to change without notice.  
This model may not be compatible with features and /or specifications that may be added in the future.  
ꢀꢈ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the DVD player yourself, as this will invalidate the  
warranty. Do not open the DVD player as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the DVD player for repair. If you are unable  
to remedy a problem by following these guides, consult your dealer or TOSHIBA for help.  
Problem  
No power  
Solution  
-Check if theAC power cord is properly connected.  
-Press the I/2ON/STANDBY on the front of the DVD player  
to turn on the power.  
-Refer to your TV' s manual for correct Video In channel  
selection. Change the TV channel until you see the DVD  
screen.  
No picture  
-Check if the TV is switched on.  
-If the progressive scan feature is activated but the connected  
TV does not support progressive signals or the cables are  
not connected accordingly. See pages 11-12 for proper  
progressive scan set up or deactivate the progressive scan  
feature as follow:  
1) Press OPEN/CLOSE on the DVD Player.  
2) When the disc tray is opened, press number button1on  
the remote control for a few seconds.  
Distorted picture  
Picture clipped  
-Sometimes a small amount of picture distortion may  
appear depending on the disc being played back. This is not  
malfunction.  
-May be caused by View Mode Setting (see page 18). Set to  
Original for normal viewing.  
-Connect DVD Player directly to the TV.  
Completely distorted picture or  
black /white picture with DVD.  
-Make sure the disc is compatible with the DVD player.  
-Ensure that the DVD Player's setting is set to match that of  
the disc and your TV.  
-Adjust the volume.  
-Check that the speakers are connected correctly.  
No sound / distorted sound  
No audio at digital output  
-Check the digital connections.  
-Check if your receiver can decode MPEG-2 or DTS and if not,  
please make sure the digital output is set to PCM.  
-Check if the audio format of the selected audio language  
matches your receiver capabilities.  
-Check that the cable is connected to the correct device (See  
Connecting to television).  
No sound and picture  
Disc cannot be played  
-The DVD+R/RW must be finalized and in video mode  
format.  
-Ensure the disc label is facing up.  
-Check if the disc is defective by trying another disc.  
-Wrong region code.  
Picture freezes momentarily during playback  
-Check the disc for fingerprint/scratches and clean with a soft  
cloth wiping from centre to edge.  
No return to start-up screen when disc is removed  
-Reset the unit by switching the player off, then on again.  
The player does not respond to the Remote Control  
-Aim the Remote Control directly at the sensor on the front of  
the player.  
-Reduce the distance to the player.  
-Replace the batteries in Remote Control.  
-Re-insert the batteries with their polarities(+/- signs)as  
indicated.  
Buttons do not work  
-To completely reset the player, unplug theAC cord fromAC  
outlet for 5-10 seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
Troubleshooting  
Problem  
Solution  
Player does not respond to some operating  
commands during playback.  
-Operations may not be permitted by the disc.  
Refer to the instructions of the disc jacket.  
DVD Player cannot read CDs /DVDs  
Menu items cannot be selected  
-Use a commonly available cleaning CD/DVD to clean  
the lens before sending the DVD Player for repair.  
-Press STOP twice before selecting system setup  
menu.  
-Depending on the disc availability,some menu items  
cannot be selected.  
Unable to select Progressive Scan on/off  
-Ensure that the output of the Video Out signal is  
switch to P-Scan/Component.  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
®
Analog audio:  
Progressive scan:  
Dolby Digital:  
An electrical signal that directly  
represents sound. In contrast,  
digital audio can also be an electrical  
signal, but is an indirect  
representation of sound. See also  
Digital audio.  
It displays all the horizontal lines  
of a picture at one time, as a signal  
frame. This system can convert  
the interlaced video from DVD into  
progressive format for connection to  
a progressive display. It dramatically  
increases the vertical resolution.  
A system developed by Dolby  
Laboratories that compresses  
digital sound. It works with stereo  
(2ch) or multi-channel audio.  
®
DTS :  
(Digital Theater System)  
Aspect ratio:  
DTS is a Multi-channel surround  
sound system, but it is different from  
Dolby Digital. Both formats were  
developed by Digital Theater  
Systems, Inc.  
PCM:  
The width of a TV screen relative to  
it is height. Conventional TVs are 4:3  
(i.e., the screen is almost square).  
Widescreen models are 16:9 (the  
screen is almost twice as wide as its  
height)  
(Pulse Code Modulation)  
PCM is a format that converts audio  
into digital data. It is mainly used for  
Audio CDs and DAT. This unit can  
play back sounds as realistic as  
JPEG:  
(Joint Photographic Experts Group)  
possible by converting even com-  
pressed Dolby Digital and MPEG  
audio to PCM.  
Chapter:  
JPEG is a method of compressing  
still image files. You can copy JPEG  
files on CD-RW / R or DVD+R / R  
discs from a computer and play back  
the files on this unit.  
Just as a book is split up into  
several chapters, a title on a DVD  
disc is usually divided into chapters.  
See also Title.  
Region code:  
Regions associate discs and  
players with particular areas of the  
world. This unit will only play back  
AUDIO OUT jacks:  
MP3:  
Jacks on the back of the DVD System  
that send audio to another system (TV,  
Stereo, etc.)  
(MPEG Audio Layer 3)  
discs that have compatible region  
codes. You can find the region code  
of your unit by looking on the rear  
panel. Some discs are compatible  
with more than one region (or all  
regions).  
MP3 is a method of compressing  
files. You can copy MP3 files on  
CD-RW / R or DVD+R / RW discs from  
a computer and play back the files on  
this unit.  
Bit rate:  
The amount of data used to hold a  
given length of music; measured in  
kilobits per seconds, or kbps. Or, the  
speed at which you record.Generally,  
the higher the bit rate, or the higher the  
recording speed, the better the sound  
quality. However, higher bit rates use  
more space on a disc.  
Multichannel:  
Sampling frequency:  
DVD is specified to have each sound  
track constitute one sound field. Multi-  
channel refers to a structure of sound  
tracks having three or more channels.  
The rate at which sound is  
measured by a specified interval to  
turn it into digital audio data. The  
number of samples in one second is  
defined as the sampling frequency.  
The higher the rate is, the better the  
possible sound quality.  
Parental control:  
Disc menu:  
A function of the DVD to limit playback  
of the disc by the age of the users  
according to the limitation level in each  
country. The limitation varies from disc  
to disc; when it is activated, playback  
will be prohibited if the software’s level  
is higher than the user-set level.  
A screen display prepared for  
allowing of selection of images, sound,  
subtitle, multi-angles etc. recorded on  
the DVD.  
Title:  
(DVD)  
A collection of chapters on a DVD.  
See also chapter.  
Digital audio:  
An indirect representation of sound  
using numbers. During recording,  
the sound is measured at discrete  
intervals (44, 100 times a second  
for CD audio) by an analog-to  
-digital converter, generating a  
stream of numbers. On playback, a  
digital-to-analog converter  
(Video CD)  
PBC (Video CD only):  
(Playback Control)  
The contents of a Video CD. When  
playing back a Video CD with the  
PBC function, the title menu will  
This function enables you to play  
back interactive software using a  
menu screen. See also Title.  
appear automatically.  
Track:  
Audio CDs and Video CDs use  
tracks to divide the contents of a  
generates an analog signal based on  
these numbers. See also  
Sampling frequency and Analog  
audio.  
disc. The DVD equivalent is called a  
chapter. See also Chapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢂ  
Limited United States Warranty  
(6) This warranty does not cover product sold AS IS or WITH ALL  
FAULTS.  
ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Canadian Warranty Information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢄ  
Canadian Warranty Information  
ꢀꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Scale TE10CSW User Manual
Timex Watch W 44 User Manual
Topcom Watch 2F00 User Manual
Topfield Cable Box TF 100 C User Manual
Toshiba Computer Drive SD M1711 User Manual
Toshiba CRT Television 13A26C User Manual
Tripp Lite Power Supply 300 PNP User Manual
ViewSonic Car Video System CDP4260 L User Manual
VTech Cordless Telephone IA5869 User Manual
Weed Eater Lawn Mower 177019 User Manual