Vizio Car Satellite TV System E320 B1 User Manual

VIZIO  
QUICK START GUIDE  
Model: E320-B1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TELEVISION ANTENNA CONNECTION PROTECTION  
Ground Clamp  
Antenna Lead In Wire  
Antenna Discharge Unit  
(NEC Section 810-20)  
Grounding Conductors  
(NEC Section 810-21)  
Ground Clamps  
Power Service Grounding Electrode System  
(NEC ART 250, part H)  
Electric Service Equipment  
• If an outside antenna/satellite dish or cable system is to be connected to  
the TV, make sure that the antenna or cable system is electrically grounded  
to provide some protection against voltage surges and static charges.  
• Lightning Protection: For added protection of the TV during a lightning  
storm or when it is left unattended or unused for long periods of time,  
unplug the TV from the wall outlet and disconnect the antenna or cable  
system.  
• Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides  
information with regard to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna discharge unit,  
size of the grounding conductors, location of antenna discharge unit,  
connection to grounding electrodes, and requirements of the grounding  
electrode.  
• Power Lines: Do not locate the antenna near overhead light or power  
circuits, or where it could fall into such power lines or circuits. Remember,  
the screen of the coaxial cable is intended to be connected to earth in the  
building installation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do You Have Questions? Find Answers At  
SUPPORT.VIZIO.COM  
Find help with:  
• New Product Setup  
• Connecting Your Devices  
• Technical Problems  
• Product Updates  
• And More  
Live Chat  
Support Available  
Your can also contact our  
award-winning support team at:  
Phone: (877) 878-4946 (TOLL-FREE)  
techsupport@VIZIO.com  
Email:  
Hours Of Operation:  
Monday - Friday: 5 am TO 8 pm (pST)  
Saturday - Sunday: 7 am TO 4 pm (pST)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOWNLOAD THE FULL USER MANUAL  
1
2
Page shown is for illustrative purposes only. Actual page content will vary.  
Help VIZIO reduce paper waste.  
You can download the Full User Manual under the  
Product Downloads section of the Support tab.  
Download the Full User Manual for your TV.  
Using a computer, navigate to:  
Enter the model number of the TV in the  
space above.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PACKAGE CONTENTS  
MENU  
OK  
BACK  
VOL  
VOL  
C
H
C
H
2
5
8
0
VIZIO LED HDTV with Stand  
Remote Control  
with Batteries  
This Quick Start Guide  
Power Cord  
3 x T4 16mm  
Phillips Screws  
3 x M4 12mm  
Phillips Screws  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE  
INPUT  
Change the currently-displayed input.  
POWER  
Turn TV on or off.  
EXIT  
MENU  
Close the on-screen menu.  
MENU  
Display the on-screen menu.  
OK  
ARROW  
Select the highlighted menu option.  
OK  
Navigate the on-screen menu.  
BACK  
BACK  
GUIDE  
Go to the previous on-screen menu.  
Display the info window.  
VOLUME UP/DOWN  
Increase or decrease loudness of  
the audio.  
H
C
V BUTTON  
Open the USB media player.  
V
O
L
H
C
V
O
L
CHANNEL UP/DOWN  
MUTE  
Change the channel.  
Turn the audio off or on.  
2
5
8
0
LAST  
NUMBER PAD  
Return to the channel last viewed.  
Manually enter a channel.  
DASH  
WIDE  
Use with the number pad  
to manually enter a digital  
sub-channel.  
Change the display mode.  
(For example, 18-4 or 18-5.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING THE BASE  
1
Place the TV screen-down on a clean, flat surface.To prevent scratches or damage to  
the screen, place the TV on a soft surface such as a blanket.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
3
Align the neck piece with the bottom of the TV  
Align the base with the neck and  
tighten the three (3) T4 16mm screws  
using a Phillips screwdriver.  
and slide it into place as shown.  
Using a Phillips screwdriver, tighten  
the three (3) M4 12mm screws into the center  
of the neck piece to secure it to the TV.  
Place the TV on a flat, stable surface.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING YOUR DEVICES  
Connect all of your devices first.  
1
Choose ONE connection type for each device.  
Match colored connectors  
to colored ports.  
BACK OF TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI CABLE*  
• DIGITAL  
• HD VIDEO (1080p)**  
• HD AUDIO  
Commonly-Connected  
Devices:  
BEST  
COMPONENT CABLE*  
• ANALOG  
• HD VIDEO (1080i)**  
• STEREO AUDIO  
BETTER  
Cable or Satellite Boxes  
Blu-rayor DVD Players  
Match colored connectors to colored ports.  
COAXIAL CABLE*  
• ANALOG  
• HD VIDEO (1080i)**  
• STEREO AUDIO  
BETTER  
AV CABLE*  
• ANALOG  
• VIDEO (480i)**  
• STEREO AUDIO  
GOOD  
Game Consoles  
Match colored connectors to colored ports.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
* Cables are not included  
** Maximum Resolution  
3
2
Remove the battery cover by pressing gently on  
the V logo and sliding away from the remote.  
Connect the power cord to the back of the TV.  
The flat edge of the connector goes toward the  
outside of the TV.  
Insert the included batteries.  
Plug the power cord into an electrical outlet.  
Gently slide the battery cover back into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
Turn the TV on by pressing the  
Power button on the remote.  
Follow the on-screen instructions to complete  
the first-time setup.  
The Setup App is displayed.  
Use the Arrow buttons on the remote to  
highlight Home Use and press OK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HELP TOPICS  
The on-screen menu has guided setup. Press MENU > Guided Setup. Select  
the type of setup you need and press OK.The Setup App begins.  
To reset the TV to factory defaults, press MENU > System > Reset & Admin >  
Reset TV to Factory Defaults. If you set a Parental Control Passcode, enter it  
now. Select Reset. Remember that all of your settings will be lost.  
How do I return to the  
Setup App?  
Press the VOLUME UP button on the remote.  
Press the MUTE button on the remote to ensure that mute is off.  
Press MENU, then select Audio. Be sure TV Speakers is set to On.  
There is a picture, but  
there is no sound.  
Be sure your connected devices are turned on.  
Press the INPUT button on the remote and select the input to which your device is  
connected (TV, HDMI-1, COMP, etc.).  
The TV displays  
“No Signal.”  
There are black/  
gray bars on the top/  
bottom/sides of the  
screen.  
Note that some television channels add black bars to the picture.  
Set the TV image mode so that the picture fills the screen. Press the WIDE button on  
the remote until the screen is filled, and then press OK.  
Adjust the video settings of your external device.  
Be sure the power cord is securely connected to the AC socket on the TV and to a  
working electrical outlet.  
There is no power.  
Press the POWER button on the remote.  
If the above steps do not work, try plugging the power cord into a different outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LEGAL  
/
COMPLIANCE  
FCC Class B Radio Interference Statement  
Notice  
The changes or modifications not expressly approved by the party responsible for compliance could void the users  
authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.  
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this  
equipment. It is the responsibilities of the user to correct such interference.  
FCC Warning  
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules  
could void the users authority to operate this equipment.  
Caution  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for  
each area.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
USA: UL  
Germany:VDE  
UK: BASE/BS  
Japan: Electric Appliance Control Act  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this  
device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Canada: CSA  
Image(s) under license from Shutterstock.com.  
LIMITED WARRANTY  
ON PARTS AND LABOR  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES,  
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE  
LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES  
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE,  
OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE  
PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR  
DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.  
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES,SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TOYOU.THIS  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,AND YOU MAY ALSO HAVE OTHER RIGHTS,WHICH VARY FROM STATE TO  
STATE.THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.  
Covers units purchased as new in United States and Puerto Rico Only.  
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship  
for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use.If a Product covered  
by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the  
Product at its sole option and discretion.  
To obtain warranty service, contact VIZIO Technical Support via e-mail: [email protected] or via phone at  
877 MY VIZIO (877.698.4946) from 5:00AM to 8:00PM Monday through Friday and 7:00AM to 4:00PM Saturday and  
Sunday,PacificTime,or visit www.VIZIO.com.PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT  
TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show  
that a Product is within the warranty period.  
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.  
Personal Data  
Parts and Labor  
If your VIZIO product is capable of storing personal data and other information,ALL CONTENTS AND INFORMATION  
WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product  
will be restored to you configured as originally purchased.You will be responsible for restoring all applicable data  
and passwords. Recovery and reinstallation of user data is not covered under this Limited Warranty. In order to  
protect your personal information,VIZIO recommends that you always clear all personal information from the unit  
before it is serviced, regardless of the servicer.  
There will be no charge for parts or labor during the warranty period.Replacement parts and Products may be new  
or recertified atVIZIOs option and sole discretion.Replacement parts and Products are warranted for the remaining  
portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.  
Type of Service  
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for  
transportation costs to the service center,but VIZIO will cover return shipping to the customer.PRE-AUTHORIZATION IS  
REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.  
Zero Bright Pixel Defect Guarantee  
This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR WARRANTY” on select new  
product purchases.To determine if this guarantee applies to your product, refer to the “DETAILS” tab of the models  
product information page (www.VIZIO.com) or look for thezero bright pixelguarantee on the box.  
Product returns to VIZIOs service centers must utilize either the original carton box and shipping material or  
packaging that affords an equal degree of protection.VIZIO Technical Support will provide instructions for packing  
and shipping the covered Product to the VIZIO service center.  
Limitations and Exclusions  
VIZIOs one-year limited warranty only covers defects in materials and workmanship.This warranty does not cover,for  
example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges,  
signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as  
well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service  
center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered.  
This one year limited warranty does not cover Products sold “AS IS”,“FACTORY RECERTIFIED”, or by a non-authorized  
reseller.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2014 VIZIO INC.ALL RIGHTS RESERVED.  
140131OC-NC  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toshiba Cash Register MA 215 User Manual
Toshiba CRT Television 19A26 User Manual
Toshiba DVD Player HD A1 User Manual
Tripp Lite Surge Protector P052 008 User Manual
Uniflame Outdoor Fireplace WAD997SP User Manual
Valcom Security Camera V 2960A User Manual
Vanguard Heating Indoor Fireplace VYGF33NRA User Manual
Vermont Casting Gas Grill VCS5027 User Manual
Vision Fitness Bicycle ST770 User Manual
Vulcan Hart Microwave Oven VC3ED User Manual