User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Note!
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
Use of shielded cable is required to comply with Class B limits in Subpart B of
Part 15 of the FCC rules. Do not make any changes or modifications to the
equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the
equipment.
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
Canadian Department of Communications
This class B digital apparatus meets all requirements of the Canadian
Interference-causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouilieur du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademark Recognition
Windows (an abbreviated term referring to the Microsoft Windows Operation
System), NetMeeting, and Media Player are registered trademarks and
products of Microsoft Corporation registered in the USA and other countries.
Arcsoft PhotoImpression 5 and Arcsoft VideoImpression 2 are products and
trademarks of Arcsoft Inc. Other corporate, product names, or trade
references are trademarks or registered trademarks of their respective
companies.
General Warnings
When fitting batteries into the camera, check the polarity of the batteries (-
and +) to ensure that you insert the battery correctly. Incorrect polarity may
result in the batteries splitting or leaking and causing a fire, injury, or soiling of
the battery compartment.
Remove the batteries if the camera will not be used for an extended period of
time. The batteries may leak and cause a fire, injury or soiling of the battery
compartment. If the batteries leak, clean and wipe the battery compartment
carefully and install new batteries. Wash your hands carefully if you touch the
battery fluid. Please note that when you remove the batteries your
images will be lost from the camera memory.
WARNING: Handling the USB cable on this product may expose you to lead,
a chemical known to the State of California to cause birth defects or other
reproductive harm. Wash your hands after handling.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
GETTING STARTED ------------------------------------------------------------------- 1
About the camera ---------------------------------------------------------------------------- 1
Unpacking the camera --------------------------------------------------------------------- 2
Camera features ----------------------------------------------------------------------------- 3
Changing the camera face panel--------------------------------------------------------- 4
Inserting a Battery---------------------------------------------------------------------------- 5
CAPTURING IMAGES
----------------------------------------------------------------- 7
Turning the Camera ON and OFF ------------------------------------------------------ 7
Camera Icons and Descriptions ---------------------------------------------------------- 9
Capturing Digital Still Images ------------------------------------------------------------- 11
Capturing Streaming Snapshots (Video clips) ---------------------------------------- 13
Deleting Images and Videos -------------------------------------------------------------- 15
SOFTWARE INSTALLATION ------------------------------------------------------- 16
Software Overview & Features ----------------------------------------------------------- 16
Picture Manager (TWAIN) ----------------------------------------------------------------- 16
Arcsoft PhotoImpression 5 --------------------------------------------------------------- 17
Arcsoft VideoImpression 2----------------------------------------------------------------- 17
Installing the Software ---------------------------------------------------------------------- 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the DIGITAL CAMERA Driver ------------------------------------------------ 19
Connecting to your PC --------------------------------------------------------------------- 22
Connecting the VistaQuest digital camera to Your PC ----------------------------- 22
DOWNLOADING IMAGES AND VIDEOS TO YOUR PC ---------------- 25
Transfer Images & Videos with the TwainApp --------------------------------------- 25
Transfer Images & Videos with the TwainApp --------------------------------------- 28
USING THE VistaQuest CAMERA AS A PC/WEB CAMERA -------- 29
Using the VistaQuest Digital Camera as a PC/Web Camera ----------------------- 29
Connecting the camera to a PC ---------------------------------------------------------- 29
Viewing Video Clips with Windows Media Player ------------------------------------------ 30
VIDEO CONFERENCING WITH NETMEETING ---------------------------- 31
How to Use the digital camera with Microsoft NetMeeting ------------------------ 31
QUICK TIPS -------------------------------------------------------------------------------- 33
Capturing Images Indoors – General Tips -------------------------------------------- 33
Capturing Images Outdoors – General Tips ------------------------------------------ 33
SPECIFICATIONS ----------------------------------------------------------------------- 35
TROUBLESHOOTING
----------------------------------------------------------------- 37
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
About the camera
Congratulations on your purchase of VistaQuest digital camera.
Your camera has been ergonomically designed to allow you to
quickly and easily capture quality digital images and short video
clips.
With a 1.3 Mega-Pixel image sensor you are assured of clear
images that can be printed, displayed on a web site, or sent to
friends and family through e-mail. The 1.3 Mega-Pixel image sensor
is capable of capturing digital still images and streaming snapshots.
Using the Picture Manager interface software, the streaming
Snapshots from your camera will automatically converted into digital
video clips. You can also use the camera as a PC/web camera,
taking real-time images when connected to your PC with the
supplied USB cable.
The included software enables you to easily download your images
and video to your PC. With Arcsoft PhotoImpression5 and
VideoImpression2 software you can edit your images and video with
ease. For more information on how to use Arcsoft
PhotoImpression5 and VideoImpression2, you may visit their
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking the camera
Open the package and examine the contents. Your package should
contain the following items:
• Digital camera
Camera neck strap
•
• Tilt base (optional)
• USB cable
• Color face plates (optional*)
Software CD containing:
•
− Picture Manager (TWAIN driver)
− Arcsoft PhotoImpression 5
− Arcsoft VideoImpression 2
ò Color faceplates may be included with your camera kit
depending upon the options selected by your camera retailer.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Features
Please refer to the following diagram to identify the camera features:
1. Shutter Button
2. Viewfinder
3. Strap eyelet
4. Lens
5. Removable face panel
6. USB connector
7. Status LCD
8. Power/Mode button
9. Battery compartment cover
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Camera Face Panel
You can give the VQ1000 a new appearance by changing the front
panel. The camera comes with several cool-color faceplates that
you can use interchangeably. Follow these instructions to change
the faceplate.
1. Turn the camera OFF.
2. Open the battery compartment cover located on the bottom
of the camera by sliding the cover in the direction indicated
by the arrow.
3. Remove the battery. Notice the small hole underneath the
battery. Use a ballpoint pen to gently press through the
hole.
4. The faceplate will detach from the camera. Remove the
faceplate from the front of the camera.
5. Select another colored plate and place it on the front of the
camera, snapping it into place.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Be sure to download your images before changing the
faceplate to avoid losing your images or video clips.
Inserting a Battery
Follow these instructions to insert or replace the battery in your
camera:
1. Turn the camera OFF.
2. Open the battery compartment cover located on the bottom of
the camera by sliding the cover in the direction indicated by the
arrow.
3. Note the battery polarity marks inside the battery compartment.
Insert (1) one fresh AAA alkaline battery, and replace the battery
compartment door. You will hear a click as the door snaps into
place.
IMPORTANT WARNINGS:
• Do not open the battery compartment when the camera
is ON.
• Store your camera with the battery removed. However,
download your images prior to storing your camera. A
small amount of battery power is required to maintain
images in memory and therefore the battery will drain
5
Download from Www.Somanuals.com. All Manuals Search And Download.
completely over time, even when not used. Loss of
image data will occur should the battery lose power.
• The VQ1000 allows up to 30 seconds for changing
the battery without losing images saved in the
camera. It is recommend that you always download
your images within 24 hours to avoid losing your
images.
• Even without any images stored in the camera, the
camera will slowly draw battery power. To conserve
battery power, after downloading images, remove the
battery from camera.
Note: The VQ1000 will use some battery power
whenever a battery is inserted. Remove the battery
from the camera after downloading images if the
camera will not be used for more than a day.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Capturing Images
Turning the Camera ON and OFF
• To turn the camera ON, press and hold the Power/Mode
button for about two seconds.
• To turn the power to OFF, press and hold the Power/Mode
button for three seconds.
Note: The camera will automatically power off after 60 seconds
of inactivity.
LCD Information/Status Display
The following icons are used in the Information/Status LCD display
to present mode and setting options.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: When scrolling through the modes, an
icon blinks when it is selected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Icons and Descriptions
To select your desired setting, press the Power/Mode button to
scroll through the different modes. The icons will display in the
status LCD. Press the Shutter button to select a function while it is
displayed. The camera is now ready to capture an image or
streaming snapshots according to your selected preferences.
Note: If you do not press any button within five
seconds, the LCD screen automatically returns
to the operational mode screen – ready to
capture an image.
Icon
Description
Number of images and videos captured
High Resolution mode (HI and two-stars)
HI
ò
1280 x 1008 pixel resolution for still
9
Download from Www.Somanuals.com. All Manuals Search And Download.
images
LOW Resolution mode (LO and one-star)
LO
ò
640 x 480 pixel resolution for still images
Indoor mode to capture images indoors, or in
darker environments
Outdoor mode to capture images outside
Streaming Snapshot mode for capturing Video
Clips
ò
ò
The Movie Icon with one-star is 320 x
240 video resolution
The Movie Icon and no-star is 160 x 120
video resolution
ERASE ALL - to erase ALL images and videos
saved in the camera
ERASE LST - to erase the LAST image saved in
the camera
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery level indicator
Low battery. The icon begins to blink and the
camera turns off after two beeps. Please
replace the battery within 30 seconds
otherwise the pictures in the camera
will be lost.
USB connection to computer
Capturing Digital Still Images
1. Press the Power/Mode button once to turn the camera on. (Press
and hold for about two seconds.)
(No images, indoors light, full battery,
highest resolution)
Default
Setting
2. Press the Power/Mode button again to scroll to the setting you
want:
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HI and
Selects 1280 x 1008 pixel resolution (best
Selects 640 x 480 pixel resolution (lesser
image quality)
LO and
image quality, but you may capture more images)
Press the Shutter button to select the resolution and return to
the main screen.
3. Press the Power/Mode button to scroll to indoor/outdoor:
Indoor: Use when inside a building or when
ambient light is low.
Outdoor: Use when capturing images outdoors.
Press the Shutter button to select lighting condition and return
to the main screen.
4. Frame your subject through the viewfinder and press the Shutter
button to capture an image. After approximately one second you
will hear a beep to confirm the image was captured. The LCD
display will increment by one as it shows the number of images
that have been captured.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Capturing Streaming Snapshots (Video clips)
1. Press the Power/Mode button to turn the camera on. (Press and
hold for about two seconds.)
2. Press the Power/Mode button to scroll to the streaming snapshot
mode setting.
Press the Shutter Button to select this mode and return to the
main screen.
3. Press the Power/Mode button to scroll to the movie resolution
setting. Select the desired resolution:
320 x 240
[No Icon] 160 x 120
Press the Shutter Button to save the video resolution preference
and return to the main screen.
4. Press the Power/Mode button to scroll to indoor/outdoor, and
select the desired setting:
Indoor: Use when inside a building or when
ambient light is low.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Outdoor: Use when outdoors
Press the Shutter button to make a selection and return to the
main screen.
5. Frame your subject in the viewfinder. Press and hold the Shutter
Button to capture streaming snapshots. You will hear continuous
beeps as the image frames are recorded. Release the shutter
button to stop recording. The LCD display will increment by one
with each movie clip captured.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Images and Videos
The delete function allows you to delete images or video clips saved
in the internal memory of your camera.
Press the Power/Mode button to scroll to Delete mode.
Delete ALL images and Videos. Press and hold down the
Shutter button until you hear 2 beeps. This will erase all
images and videos saved in your camera.
Delete the LAST image or video capture. Press the
Shutter button once and wait until you hear 2 beeps. This
will erase the last image (or video clip) you captured.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE INSTALLATION
Software Overview & Features
The VQ1000 includes the following software and applications to
enhance your digital imaging experience. The Picture Manager
(TWAIN) software will help you download the images and video from
your VQ1000 to your computer. All three software programs provide
easy and convenient file transfer, and you can pick the one that you
feel most comfortable using. The Arcsoft PhotoImpression 5 and
Arcsoft VideoImpression 2 are photo and video editing applications.
Picture Manager (TWAIN)
The Picture Manager works with TWAIN compliant third party
software. The Picture Manager allows you to quickly view the
images on the VQ1000, edit the images (e.g., crop, rotate, flip), and
save them to your computer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Arcsoft PhotoImpression 5
• Acquire, organize, view, browse and share photos fast.
• Provides powerful tools for photo editing and enhancing.
• Create slideshows with music, calendars and greeting cards.
Arcsoft VideoImpression 2
Create 360°and Wide-angle panoramas in just 3 steps!
•
• Helpful Wizard simplifies project setup.
• Automated warping, aligning, and blending deliver great
results fast.
• Directly output to e-mail, the Web, office documents, screen
savers and printers.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Software
Follow these instructions to install the VQ1000 driver and application
software on your PC system.
Note: (For Windows 98SE users ONLY!)
You may encounter a message during the
installation due to an old version of DirectX installed
on your computer. Select “No” and continue with the
installation. This will not affect the operation of you
computer.
1. Insert the VQ1000 software CD into your CD-ROM drive. The CD
will auto run, and the DIGITAL CAMERA installation menu will
appear.
Note: If the CD does not auto run, click Start ‰Run, type in
“D:\setup.exe” in the Run dialog text box (where D:\ is your CD-
ROM drive).
2. Move your cursor to the application/driver software that you want
to install on your computer, and click it once to install.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Please follow the instructions below to complete installing your
software.
Installing the DIGITAL CAMERA Driver
When clicking the Digital Camera Drive application, a progress
will appear.
Click the “Install” to start the installation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Please wait for the application to install on your computer. The
program will take up 5 minutes to complete.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
When the installation is completed, click “Finish”.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to your PC
Connecting the VistaQuest digital camera to
Your PC
Note: Before you connect the camera to your PC,
you must install the TWAIN driver.
1. Press the Power/Mode button to turn the camera OFF.
2. Lift the USB connector cover.
3. Plug the smaller connector of the USB cable into the USB port on
the camera.
4. Plug the larger connector of the USB cable to the USB port on
your PC or notebook computer.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Windows will prompt you to install hardware
drivers the first time you connect the camera to your
PC after installing the software. Place the camera
CD ROM in your CD ROM drive and follow the
instructions on the screen. If you subsequently
connect the camera to a different USB port on your
PC it may go through the hardware installation
routine once again.
5. Your PC now detects the camera.
The camera displays
your computer.
in the LCD to indicate it is connected to
6. Follow the on-screen instructions to complete installing the
hardware drivers.
For windows 98SE or windows 2000 windows ME (Millennium
Edition)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
For windows xp
Click “next”
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DOWNLOADING IMAGES AND VIDEOS
TO YOUR PC
Transfer Images & Videos with the TwainApp
Note: Before you connect the camera to your PC, you must install
the TWAIN driver.
1. Click Start-All Program- Mega Pixel Camera (8105 SXGA)-
TwainApp.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2. You will see the following screen, click on “DSC Browse” to
browse the pictures in the camera.
3. The screen appears as below, click on “Download” to download
the pictures.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4. After downloading the pictures you will see the following screen,
click on “Transfer all pictures” and then select a path to store the
pictures.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer Images with PhotoImpression 5
Follow the instructions below to transfer
the pictures using PhotoImpression 5.
1. Connect the VQ1000 to your
computer (refer to Making
Connections on page 22).
2. Launch PhotoImpression 5
application: Start → Programs
→Arcsoft software suite →
PhotoImpression 5.
3. Select “Camera/Scanner” → “Mega Pixel Camera (8105
SXGA)”.
4. The Picture Manager allows you to view each individual
image saved on your camera. You can use the arrow keys
to scroll to the previous or the next picture. Click on the
“Transfer” button to download the images to your computer.
Note: 1. Power off the camera before remove batteries.
2. Download your images before removing battery and faceplate
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the VISTAQUEST camera as a
PC/Web Camera
Using the VistaQuest Digital Camera as a
PC/Web Camera
The VQ1000 may be used as a PC/Web camera. Please read the
instructions below carefully.
Connecting the camera to a PC
1. Set your VQ1000 on the tilt
base and place it on a flat
surface. The tilt base also
attaches to the laptop as
shown here.
2. Connect the camera to your
PC using the USB cable.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: For more information on PhotoImpression 5
and VideoImpression 2, please visit Arcsoft Web
site at www.Arcsoft.com
Viewing Video Clips with Windows Media
Player
If your computer is equipped with Windows Media Player (Windows
2000, ME and XP), you can view your videos using Windows Media
Player.
You are supposed to download the pictures to the computer then
double click the Avi file.
Note: If you need to install the latest version of
Windows Media Player, you can download Media
Player free of charge from Microsoft Web site at
ownload/default.asp
For questions regarding Windows Media Player, please contact
Microsoft Media Player help.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Conferencing with Netmeeting
How to Use the digital camera with Microsoft
NetMeeting
The VQ1000 can be used with Microsoft NetMeeting. Follow these
instructions:
1. Connect the camera to your computer with the USB cable.
The camera will power on automatically.
2. Launch NetMeeting. Go to Start → Programs →
Accessories Communications NetMeeting.
→
→
3. After NetMeeting starts, click the Tools menu, select Video
and click “Send”. A video window opens (My Video). You
can start and stop sending video using the controls in this
window.
Note: For more information on using NetMeeting
and to download the latest version, browse to the
Microsoft Web site at
31
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also use the camera as a video conferencing camera
with popular Instant Messengers such as Microsoft MSN with
NetMeeting, Yahoo! Messenger, and AOL Instant Messenger
(AIM). For details on how to use individual instant messaging
programs, please contact the service provider directly.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK TIPS
Capturing Images Indoors – General Tips
• Try to capture images in an area where there are a lot of
colors and patterns. If taking a portrait image of a person,
make sure the clothing does not have a high contrast to the
background (e.g. white shirt against black background).
• Depending on the subject and the indoor conditions, it is
generally better to have the light source at an angle (e.g. 45
degrees) to the subject instead of directly in front of or
directly behind the subject.
• Avoid an area where a wall is the main portion of the image.
• Avoid light sources positioned directly behind or directly in
front of your subject.
Normally indoors lighting is diffused. Therefore, avoid bright
light sources in the image. A large variation in the lighting of
a scene (e.g. shaded hallway or bright entryway) can cause
improper exposure.
•
•
Do not shoot directly into bright light or direct sunlight.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Try to avoid any mixture of different lighting such half
sunlight and half-fluorescent light.
•
• Images of a computer screen may include lines and artifacts.
• Avoid an object that could reflect light in the image close to
the person taking the picture (e.g. glass bottle, white shirt,
glasses, etc.).
Capturing Images Outdoors – General Tips
• Try to capture images in an outdoor setting where there are
a lot of colors and patterns.
It is better to have the subject facing the sunlight instead of
having their back to the sunlight.
•
• Try to position your subject close to the center of the image.
• Avoid taking an image where there is a shiny surface or
reflective area in the image (e.g. glass, metal).
• Avoid pointing the camera directly at a shiny surface.
• Do not capture images of high-contrast with both shaded
and sun lit areas together. While the camera does adjust for
this, it is unable to adjust for vast differences in lighting that
the human eye can handle.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Image Sensor
1.3M pixels (1280x1024) CMOS Sensor
Lens Specification
F 2.8, f = 8.79 mm (43mm equivalent to 35mm film)
Fixed Focus 0.9m ~ infinity
Focusing
Shutter
1/4~1/1500 sec. (electronic shutter) auto control
Virtual type: optical, Magnification 0.32 or higher,
Coverage: 80% or higher
Viewfinder
White Balance
Auto
Auto
Exposure Control
Storage
Built-in 8MB SDRAM
2 stars: 1280 x 1008 pixels 32 pictures
1 star: 640 x 480 pixels 128 pictures
Video Clip 320 x 240 pixels 60 seconds
Storage Capacity
(8MB)
10fps @ 640 x 480; 15fps@320 x 240 via USB stream
to PC
PC Camera Mode
JPEG file (still), AVI file (video)
Output File Format
Display
B/W Status LCD
35
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Interface
Power
USB 1.1 (Mini-USB connection direct to PC)
AAA 1.5V Alkaline Battery x 1 (optional)
Battery Life
Approximately 100 pictures at fine mode; 400 pictures
at basic mode
Auto power saving
System auto power off: 60 sec. When "empty battery"
is shown, camera will shut down after 3 beeps
Dimension
Weight
56 x 53 x 21mm (2.2” x 2.08” x 0.83”)
33.5 g (without battery)
Microsoft Windows 98 SE / 2000 / ME / XP
System Compatibility
System Requirements
Pentium II 333 MHz, 64MB of RAM, 310MB free disk
space, USB Port & CD-Rom Drive
Arcsoft PhotoImpression Arcsoft VideoImpression,
Camera Driver
Bundled Software
TWAIN
Drivers
Certifications
FCC/CE
User’s Guide CD-ROM including Driver and Photo
Editing Software USB Cable, Neck Strap, Stand and
1x AAA Battery are optional
Accessories
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem Possible cause
Solution
The
The batteries are
discharged.
Replace the batteries with fresh
batteries.
camera
has no
power.
The batteries are
inserted incorrectly.
Check the battery orientation.
Is the camera
connected to a
computer?
The camera buttons are not
functional when connected to a
PC. Disconnect the camera to
capture more images.
The
camera
won’t
capture
an image.
Is the camera power
on?
The camera powers off
automatically after approximately
one minute. Make sure the
camera power is ON before
taking an image.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Is the camera
connected to a
computer?
The camera buttons are not
functional when connected to a
PC. Disconnect the camera to
capture more images.
Use the TWAIN driver utility to
capture an image while
connected to a PC.
The
The camera or subject Hold the camera steady to
images
are
was moving when the
image was capture.
capture images. The minimum
focus distance is about two feet.
Objects closer than 2 feet will
not be in focus.
blurry.
The
image is
too light.
You are facing a bright Change the angle of the image
light when taking the
image.
so that bright lights do not shine
directly on the camera lens.
+
38
Download from Www.Somanuals.com. All Manuals Search And Download.
|