Visioneer
®
Strobe XP 470
USB Scanner
User's Guide
for Windows
Download from Www.Somanuals.com. All Manuals Search And Download.
Visioneer Strobe XP 470
USB Scanner
User’s Guide
F O R W I N D O W S
Download from Www.Somanuals.com. All Manuals Search And Download.
C O P Y R I G H T I N F O R M A T I O N
Copyright © 2005 Visioneer, Inc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc.
This product is covered by one or more of the following patents: 6,459,506 6,054,707 6,275,309 5,818,976 5,499,108 5,517,332.
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. ZyINDEX is a registered trademark of
ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International, Inc. All Rights Reserved. All other products mentioned
herein may be trademarks of their respective companies.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The software described is furnished under a
licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on
any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any
purpose other than the licensee's personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer.
Part Number: 05-0687-000
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software
Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer
is solely responsible for complying with all such laws and regulations.
Technical Support
Visit Visioneer’s web site at www.visioneer.com for technical support including help during installation, driver updates, spare parts, and documentation.
FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with
FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer
could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting Destination Application Properties . . . . . . . . . . . . . . . . 40
Selecting Page Format Options . . . . . . . . . . . . . . . . . . . . . . . . . 49
Renaming a OneTouch Button . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selecting Options for a Button . . . . . . . . . . . . . . . . . . . . . . . . . 55
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
TABLE OF CONTENTS
Scanning with sPDF or nPDF and Searching for Text . . . . . . . . 79
Scan and Burn to a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Creating an HTML Web Page from Your Scanned
Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
The Scan Info Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Cleaning the Automatic Document Feeder . . . . . . . . . . . . . . . . . . 124
Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Replacing the ADF Pad Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 126
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Uninstalling the PaperPort Software . . . . . . . . . . . . . . 132
Visioneer Strobe XP 470 Scanner Specifications . . . . . . . . . . . . . . 134
Visioneer Strobe XP 470 Scanner Parts List . . . . . . . . . . . . . . . . . . 135
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
TABLE OF CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Congratulations on purchasing your Visioneer Strobe XP 470 USB
scanner. With your scanner you can quickly scan single-sided or double-
sided stacks of color and black-and-white documents and place their
images on your computer.
WHAT’S IN THE BOX
Before proceeding, check the contents of the box. If items are missing or
damaged, contact the dealer where you purchased the scanner.
Visioneer Strobe XP 470 USB Scanner
Paper Guide
Output Tray
Power Supply
Replacement
ADF Pad
USB Cable
Power Cord
Two CDs
Disc 1 and Disc 2
User’s Guide Buttons
Label
Quick Install Guide and Technical
Support Card
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
THE VISIONEER STROBE XP 470 SCANNER
Paper guide
LED Number
Destination Selector button
Simplex button
Duplex button
Status light
Output tray
ADF cover release
Power switch
Power jack
USB port
Download from Www.Somanuals.com. All Manuals Search And Download.
THE VISIONEER STROBE XP 470 SCANNER
3
Paper guide—Holds documents in place. Adjusts to fit the document
width.
LED Number—Shows the current scan setting for the Simplex and
Duplex scanning buttons. A scan setting includes resolution, file type,
brightness, color or black and white, destination, and so on.
Destination Selector button—Selects the scan setting for the Simplex
and Duplex buttons. Press to cycle through the nine settings.
Simplex button—Press to scan a one-sided document.
Duplex button—Press to scan a two-sided document.
Status light—Shows the scanner’s status. A rapidly flashing green light
indicates the scanner is preparing to scan. A steady green light indicates
the scanner is available to scan. Refer to the Troubleshooting section for
additional details.
Output tray—Holds documents after scanning through the automatic
document feeder (ADF).
ADF cover release—Opens the cover on the ADF.
Power switch—On/Off power switch.
Power jack—Connects the power cord to the scanner.
Universal Serial Bus (USB) port—Connects the scanner to the
computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
WHAT YOU NEED
An IBM-compatible PC with:
■ A CD-ROM drive
■ An available Universal Serial Bus (USB) port
■ A Pentium II (or higher) processor or equivalent
■ Microsoft Windows operating system: 2000 (Service Pack 4), Me, or
XP (Service Pack 1 and 2)
■ Available megabytes (MB) of internal memory (RAM):
■ 128 MB for Windows 2000 or Me
■ 256 MB for Windows XP
■ 200 MB minimum of free hard disk space
A VGA Monitor
Recommended settings for your monitor are as many colors as
possible—High Color (16-bit), True Color (24-bit or 32-bit). Set the
resolution to at least 800 by 600 pixels.
To set your monitor’s colors and resolution, open the Windows Control
Panel, double-click Display, and then click the Settings tab.
DOCUMENTATION
Your scanner is delivered with the following documentation:
■ Quick Install Guide—Abbreviated installation instructions.
■ Visioneer Strobe XP 470 Scanner User’s Guide—Detailed
installation, scanning, configuration, and maintenance information.
■ ScanSoft PaperPort User’s Guide—On the Installation CD; contains
detailed feature and configuration information.
■ Online Help
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
5
INSTALLATION
Installation is a quick, four-step process:
1. Assemble the scanner
2. Install the software
3. Connect and power on the scanner
4. Connect the USB cable to your computer
BEFORE YOU BEGIN
Please make sure of the following before you begin installation:
■ If your computer has AntiVirus or AntiSpyware software running,
you may see messages during installation asking you to allow the
installation to proceed. Although the messages will differ based on
the software your computer is running, in each case you should
allow the installation to proceed. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your scanner,
is finished.
■ If you already have a scanner connected to your computer, you need
to remove its driver programs first before beginning the installation
of your Visioneer Strobe XP 470 scanner. Please see “Uninstalling
Your Scanner” on page 131 for basic instructions, or see the User’s
Guide that you received with your other scanner for specific
instructions.
■ You had the option to purchase your Visioneer Strobe XP 470
based on the software bundled with the scanner. The information
in this guide may cover software not provided with the scanner you
purchased. Please disregard any information about the software not
applicable to your chosen product.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
STEP 1: ASSEMBLE THE SCANNER
To assemble the scanner:
1. Remove all shipping tape from the top and bottom of the scanner.
2. Carefully remove the protective foam from the ADF cover release,
then press the release and open the automatic document feeder
cover.
ADF Cover
Release
3. Carefully remove any foam particles that may have gotten inside the
document feeder, and close the cover.
4. Align the slots on the paper guide with the ridges on the scanner
and slide it down until it snaps into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: ASSEMBLE THE SCANNER
7
5. Insert the pins on each side of the output tray into the holes on the
scanner.
6. Flip open the extension on the output tray so it is fully extended.
7. Proceed to “Step 2: Install the Software.”
Download from Www.Somanuals.com. All Manuals Search And Download.
8
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
STEP 2: INSTALL THE SOFTWARE
Note: The software is on the two CD’s you received with your scanner.
Please be sure to install from Disc 1 first. Disc 2 contains the OmniPage
12 software that you install after the scanner software.
To install the software:
1. Start Microsoft Windows and make sure no other applications are
running.
2. Insert Disc 1 into your computer’s CD-ROM drive.
The Options Menu for the CD automatically opens.
Note: If the CD does not start, check the following:
■ Make sure the CD drive’s door is completely shut.
■ Make sure the CD was inserted in the drive in the proper
direction (label side up).
To launch the CD manually:
■ Open the Windows option for My Computer. You can do this by
double-clicking on the My Computer icon on your desktop.
■ Double-click the icon for your CD-ROM drive.
■ The Installation menu for the CD should now open.
If the menu does not open:
■ From the list of files on the CD, double-click the file named
START32.EXE.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: INSTALL THE SOFTWARE
9
3. On the installation menu, select Install ScanSoft PaperPort.
4. At the PaperPort 9.0 Welcome window, click Next.
Installing PaperPort 9.0 will uninstall any existing versions of
PaperPort and install PaperPort 9.0 while retaining all of your
PaperPort files.
5. Read the ScanSoft license agreement and select I accept the terms
in this agreement then click on Next. If you choose not to accept
the license agreement, the installation will terminate and the
PaperPort software will not be installed.
6. Fill in the Customer Information then click on Next.
7. Keep the default Setup Type and click on Next.
8. Click on Install to begin the installation.
Reminder: If your computer is running an AntiVirus or
AntiSpyware application, you may see messages asking you to allow
installation. Select the option to allow installation to proceed with
the install.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
9. At the Product Registration window, do one of the following:
■ Select Register online, then click OK and follow the registration
instructions.
■ Select Print registration form, then click OK and follow the
instructions to complete and print the registration form.
■ Select Remind me in 7 days and click OK.
10. At the Installshield Wizard Completed window, click Finish.
If a message window opens instructing you to restart your
computer, click Restart.
11. At the Installation Menu, select Install Scanner Driver.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: INSTALL THE SOFTWARE
11
The Welcome to the OneTouch 4.0 Setup Wizard opens.
12. Click Next.
13. On the Visioneer License Agreement window, read the license
agreement. If you accept the terms, select I Agree then click Next.
If you choose not to accept the license agreement, the installation
will terminate and the scanner driver will not be installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
The next window lists the choices of the drivers that you can install
for your scanner.
14. Choose the option you want.
■ Full Install (OneTouch, TWAIN and ISIS)—This is the
recommended installation. It installs the OneTouch 4.0
software which provides the necessary driver software for the
scanner. It also installs scanning interfaces for TWAIN,
Microsoft’s Windows Image Acquisition (WIA), and the ISIS
driver. Installing this option means that you can use several
different methods to scan, as explained in this User Guide.
Note: If your computer is running Windows Me, you must
select this Full Install (OneTouch, TWAIN and ISIS) option.
The other options do not apply to Windows Me computers.
■ TWAIN and ISIS—The TWAIN and ISIS drivers are installed.
The OneTouch 4.0 Monitor will not run and you cannot use the
OneTouch features. You can use the Visioneer Strobe XP 470
TWAIN driver, and scan from other applications with a TWAIN
interface. You can also scan from applications that use the ISIS
driver.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: INSTALL THE SOFTWARE
13
■ TWAIN only—The TWAIN driver is installed. The OneTouch
4.0 Monitor will not run and you cannot use the OneTouch
features. You can use the Visioneer Strobe XP 470 TWAIN
driver, and scan from other applications with a TWAIN
interface.
■ ISIS only—The ISIS driver is installed. You can scan from
applications that use the ISIS driver, such as Kofax VRS and
QuickScan, and you can also use the Kofax TWAIN driver. But
use the Visioneer Strobe XP 470 TWAIN driver.
Note: If decide to change your scanner’s installed drivers later on, you
must first uninstall the drivers the scanner is currently using. See the
instructions on page 15.
15. Click Next.
During installation of the Full Install you will see this window
asking you to select one of the images for your Color Space setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
The Color Space setting sets the gamma value for the scanner so
scanned items look good on your monitor. Gamma controls the
brightness of the midtones of colors. This setting can be changed
later on as you are scanning.
The driver installation will now begin.
17. STOP when you see the “Complete the installation by connecting
your hardware” window. Do NOT click on OK yet. Leave the
window open and proceed to “Step 3: Connect and Power On the
Scanner” on page 16.
Reminder: If your computer is running AntiVirus or AntiSpyware
software, you may see messages asking you to allow installation.
Select the option to allow installation to proceed.
Note: If you want to see more information about your scanner and a
quick explanation of how to use the OneTouch features, click on the
More button on the window. After you have read more about your
scanner, return to the Connect Scanner window and proceed to
“Step 4: Connect the USB Cable” on page 17.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: INSTALL THE SOFTWARE
15
TO INSTALL ANOTHER DRIVER
Before you can install another driver for your scanner, you must remove
the currently installed driver first. Then the new driver can be installed.
1. Remove the scanner from the system.
a. Open the Windows Control Panel then double-click on the
System icon.
b. Select the Hardware tab then click on the Device Manager
button.
c. Find and select Imaging Devices then select the Visioneer
Strobe XP 470.
d. Choose Uninstall from the Action menu.
2. Unplug the scanner USB cable.
a. Open the Windows Control Panel.
b. Double-click on Add/Remove Programs.
c. Select OneTouch 4.0 then click on the Remove button.
4. Follow the instructions in “Step 2: Install the Software” on page 8
of this User Guide and follow steps for completing a custom driver
installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
STEP 3: CONNECT AND POWER ON THE SCANNER
Connect the power supply and power cord, and then turn the power on.
To connect your Visioneer Strobe XP 470 scanner:
1. Plug the power supply into the power port on the scanner.
Note: Only use the power supply (SA60-24 made by Sino-American)
included with your scanner. Connecting any other type of power
supply may damage your scanner, and will void its warranty.
2. Plug the power cord into the power supply and into a wall outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4: CONNECT THE USB CABLE
17
left of the power port.
The status light comes on and flashes indicating that the scanner is
receiving power.
Now proceed to the next section, “Step 4: Connect the USB
Cable.”
STEP 4: CONNECT THE USB CABLE
The Visioneer Strobe XP 470 scanner connects to any available USB
port. Check your computer’s manual for USB port locations.
Note: You can connect the scanner to your computer while the
computer is running. You do not have to shut down your computer.
1. Plug the USB cable into the USB port on the scanner and then into
a USB port on the computer. The ports are identified with the USB
symbols.
USB
You can also connect the scanner to a USB hub. If you use a USB
hub, it must have its own power supply already plugged into an
electrical outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Note: If you have not installed the scanner driver, unplug the USB
cable from the computer and install the software now. When the
driver installation is complete, a message tells you when to connect the
scanner.
If you are using Windows XP, Service Pack 1, and have plugged the
USB cable into a USB 1.1 port, an information bubble may open
explaining that “A HI-SPEED USB device is plugged into a non-
HI-SPEED USB hub”. Plug the USB cable into a USB 2.0 port (if
available) or just disregard the message. If you leave it plugged into
the USB 1.1 port, your scanner may scan a bit slower than the 33
pages per minute, and 66 images per minute available with a USB
2.0 port.
Your computer then recognizes that a scanner has been plugged into
the USB port and automatically loads the appropriate software to
run the scanner.
Do not proceed until you receive a message that your computer has
found the new hardware, or updated the driver database. If your
computer is running Windows XP, you will see the following message.
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4: CONNECT THE USB CABLE
19
2. When you’re certain that the software has completely loaded, return
to the “Complete the installation by connecting your hardware”
window and click OK to complete the installation process.
You can also click More to see a quick overview about accessing and
navigating the OneTouch Button Panel. When you’re finished
reading the additional information, click OK.
The scanner’s status light is green when the scanner and computer
are communicating properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
3. Click Close at the OneTouch 4.0 Installation Complete window.
4. You can now remove the installation CD so you can install the
OmniPage 12 software from the Disc 2 CD that you received with
your scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL OMNIPAGE 12 AND ADDITIONAL SOFTWARE
21
INSTALL OMNIPAGE 12 AND ADDITIONAL SOFTWARE
Both CDs that you received contain additional software for your
scanner:
■ Disc 1 contains a new version of Adobe Acrobat Reader
■ Disc 2 contains the OmniPage 12 software
Note: OmniPage 12 is required for your scanner to have its full range
of features. Please make sure to install OmniPage 12 before scanning.
To install OmniPage 12:
1. Make sure the Installation CD is removed from your computer’s
CD-ROM drive, and then insert Disc 2 into the drive.
The menu for the CD automatically opens.
If the menu does not automatically open, see the note on page 8.
2. Select OmniPage 12 to install.
3. Follow the instructions on the screen.
4. When installation is finished, remove Disc 2 and store it in a safe
place.
To install additional software:
drive, and then re-insert the Installation CD (Disc 1) into the
drive.
The Installation menu will open automatically.
If the menu does not automatically open, see the note on page 8.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
2. Select Additional Software and Guides.
3. At the next set of menu options, click on More Great Software.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL OMNIPAGE 12 AND ADDITIONAL SOFTWARE
23
4. Select the software application that you want to install and follow
the installation wizard for that product.
Adobe Acrobat Reader is included under More Great Software. If your
computer already has a later version of Adobe Acrobat Reader installed,
please do not install the version provided on the installation CD.
5. To view, print, or save the user guides, click User Guides in the
Additional Software and Guides menu.
Select the user guide you want to view. After the file opens, you can
choose to print or save it using the application’s “File” menu.
Note: The user guides are in a .pdf file format. If you do not have
Adobe Acrobat Reader installed on your computer, you will not be
able to view these user guides.
6. When you have finished, remove the CD from the computer and
store it in a safe place.
That’s it! You are now ready to scan!
Download from Www.Somanuals.com. All Manuals Search And Download.
24
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
REGISTER YOUR SCANNER
Registering your scanner is very important because it provides you with
access to our free telephone support service. Registration also gives you
free access to software updates for your scanner.
To register your scanner:
1. Right-click on the OneTouch icon in the Windows Notification
Area (at the bottom right corner of the screen).
2. Choose Check for Online Updates from the pop-up menu.
The OneTouch Icon
3. Follow the instructions on the screen and register your scanner by
entering your scanner’s serial number and your email address.
Note: A valid email address is required.
The serial number is located on the underside of the scanner.
The Serial Number
After registration is complete you will receive an email message with
your RegID. Your RegID is important as you will need it when
accessing free telephone support, or checking for online updates.
4. Write down your RegID below so you will always know where to
find it.
RegID:_________________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
LOAD AND SCAN DOCUMENTS
25
Scanning
When you press either the Simplex or Duplex button, documents are
scanned using the scan settings indicated by the LED number. The
scanned images are then sent to a software application (known as the
Destination Application) on your computer.
LOAD AND SCAN DOCUMENTS
1. Make sure the output tray is fully extended, and adjust the paper
guide for the width of paper.
Note: Remove any staples or paper clips from documents before
loading them into the automatic document feeder. Staples and paper
clips can jam the feed mechanism and scratch the internal
components.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
2. Load the documents with their tops into the automatic document
feeder.
For Simplex (one-sided) scans, load the documents face down.
For Duplex (two-sided) scans, the documents can be face up or
down because both sides are scanned.
you want.
To choose a new scan setting, press the Destination Selector button.
The current scan setting. See “Check
the Scan Settings Before Scanning” on
page 28 to check the settings.
Press the Destination Selector to cycle
through the scan settings to select the
one you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
LOAD AND SCAN DOCUMENTS
27
4. To scan a one-sided document, press the Simplex button.
To scan a two-sided document, press the Duplex button.
A scan progress window opens and then a thumbnail of the scanned
image appears in the Destination Application. In this example of
duplex (two-sided) scanning, the Destination Application is the
PaperPort desktop and the two pages are stacked, one on top of the
other.
Cancel
button
Pause
button
To Cancel scanning, click the Cancel button.
To pause the scanning, click the Pause button. It will change to a
Continue button. Put the page back into the scanner and click
Continue to resume scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
CHECK THE SCAN SETTINGS BEFORE SCANNING
1. To check the scan settings before scanning, press, hold down, and
then release, either the Simplex or Duplex button.
Press, hold down, and then
release either button to see
the setting for the selected
LED number.
The OneTouch Button Panel appears with the description of the
selected settings. This sample shows the current description of
setting 6.
Thisnumbercorrespondsto
the LED on the scanner.
The icon indicates the
Destination Application
for this setting.
The current name of the setting.
Your document will be scanned with
these options for setting Number 6.
The OneTouch Properties window for that setting also appears in
case you want to change scanning options before scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
LOAD AND SCAN DOCUMENTS
29
Use this window to reset the button settings for the destination
applications, file formats, and so forth. See “Configuring the
OneTouch Buttons” on page 35 to reset the settings.
2. Click the close boxes on the OneTouch Button Panel and the
Properties window to close them.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
SCAN FROM THE ONETOUCH BUTTON PANEL
You can scan from the OneTouch Button Panel on the screen.
1. Adjust the paper guide for the width of paper and load the
documents with their tops into the automatic document feeder.
For Simplex (one-sided) scans, load the documents face down.
For Duplex (two-sided) scans, the documents can be face up or
down because both sides are scanned.
The OneTouch Icon
2. Now click on the OneTouch icon in the Windows System Tray (at
the bottom right corner of the screen).
The OneTouch Button Panel appears and shows the first five
on-screen scanning buttons. Click the arrows to cycle through all 9
settings.
Click the button you
want to use to scan.
Click these arrows to navigate
through the 9 buttons.
The Properties window also appears in case you want to change the
scanning options before scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCAN FROM THE ONETOUCH BUTTON PANEL
31
3. On the screen—not on the scanner—click the button you want to
use to scan.
For example, if you want to scan
with button 2, which converts the which attaches the scanned document
document to PDF, click here. to a blank eMail message, click here.
Or if you want to scan with button 4,
Note: Your scanner comes with 9 factory-preset OneTouch button
settings. You can reconfigure and rename the buttons for your specific
scanning requirements.
The scanner begins scanning. When the process finishes, the
scanned images appear in the Destination Application, just as if you
scanned with the Simplex or Duplex scanner buttons.
USING THE ONETOUCH BUTTON PANEL
The OneTouch Button Panel is also your on-screen set of controls for
the scanner. The OneTouch Button Panel shows information about the
scanner and its settings.
1. To open the OneTouch Button Panel, click the OneTouch icon. It is
located in the Windows System Tray at the bottom right corner of
the screen.
The OneTouch Button Panel opens at its Button View, which
shows the on-screen scanning buttons.
The Button View
Download from Www.Somanuals.com. All Manuals Search And Download.
32
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
2. To scan from the panel, click the icon you want to use to scan.
3. To see the details for a button, right-click on it. The Properties
window for that button also appears.
Right-click on a button to see its details in
the Detail View and Properties Window.
The Detail View
Clicking the icon in either view starts the
scanner scanning using the button’s settings.
4. To cycle through the nine buttons, click the arrows on the right side
of the panel.
Click these arrows to cycle
through the 9 buttons.
5. To navigate through the panel’s three views, click the green arrows
at the top of the panel.
Click these arrows
to navigate through
the panel’s three
views.
The Button View
The Hardware View
The Detail View
■ The Button View is your main scanner control panel. Use it to
scan or to see all nine buttons.
■ The Detail View shows the current scan settings for a button.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCAN FROM THE ONETOUCH BUTTON PANEL
33
■ The Hardware View shows the current scanners connected to your
computer.
If the Properties window is not open, right-click the icon on the
Detail View or Button View to open it.
From the Hardware View and Detail View, click the green arrow to
return to the Button View. You can also click on the hardware icon
to return to the Button View.
6. To close the OneTouch Button Panel, click the close button on the
panel.
ABOUT THE ONETOUCH BUTTON PANEL’S NAMES AND ICONS
The button names, such as PDF, eMail or Fax, indicate the original
factory settings for a button. For example, the eMail button is set up to
scan documents and then immediately attach them to a new eMail
message in Microsoft Outlook Express. But you can change the name,
the Destination Application, and any of the other aspects of the button.
A question mark for a button, such as shown for button 5 in the
examples above, means your computer does not have appropriate
software for the initial factory settings (Fax software in the example
above). In that case, you would probably want to change the name and
lot of documents that have faint images, such as hand-drawn sketches in
light pencil, you might want to change the button’s name to Sketches,
and the Destination Application to Microsoft Paint, or some other
drawing program.
See “Configuring the OneTouch Buttons” on page 35 to change the
settings of the buttons on the OneTouch Button Panel.
In addition to scanning from the scanner buttons and the OneTouch
Button Panel, you can scan directly from PaperPort and other software.
See the sections “Scanning from PaperPort” on page 95 and “Scanning
with the Windows Image Acquisition” on page 119 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
THE DEFAULT ONETOUCH SETTINGS ON YOUR SCANNER
When you receive your scanner, its settings are preconfigured to scan
items for various basic tasks, such as email or fax, and then send the
scanned image to an appropriate, preselected Destination Application.
The following table shows these factory-default settings. You can change
any of these settings.
Destination
Application
Button Name
Preconfigured Settings
1
2
3
4
5
6
7
8
9
Scan
PaperPort
Black&White @ 200dpi Duplex
8.5" x 11" page
Brightness 50%
PDF
PaperPort
Printer
Black&White @ 200dpi Duplex
8.5" x 11" page
Brightness 50%
Print
Black&White @ 300dpi Simplex
8.5" x 14" page
Brightness 50%
eMail
Fax
Microsoft
Outlook
(attachment)
Black&White @ 200dpi Simplex
8.5" x 11" page
Brightness 50%
Fax Application Black&White @ 200dpi Simplex
8.5" x 11" page
Brightness 50%
OCR
Archive
Custom
Paint
Microsoft Word Black&White @ 300dpi Duplex
8.5" x 11" page
Brightness 50%
Transfer to
Storage
Black&White @ 300dpi Simplex
8.5" x 11" page
Brightness 50%
Microsoft Paint Color @ 100dpi Simplex
6" x 4" photo size
Brightness 50% Contrast 50%
Microsoft Paint Color @ 300dpi Simplex
8.5" x 11" page
Brightness 50% Contrast 50%
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
35
CONFIGURING THE ONETOUCH BUTTONS
Each OneTouch button configuration consists of a Destination
Application, a Scan Configuration, and a Document Format. The
OneTouch Properties window is where you select these three elements
for a button.
To open the OneTouch Properties window:
1. Click the OneTouch icon. It is located in the Windows System Tray
at the bottom right corner of the screen.
2. Right-click a button on the OneTouch Button Panel.
Reminder: Remember that left-clicking a button on the OneTouch
Button Panel starts the scanner scanning. Right-clicking opens the
OneTouch Properties window.
The OneTouch Properties window opens for that button.
Right-click on a button (for example,
button 2) and the Properties window
opens for that button.
The OneTouch Properties window also opens when you press, hold
down, and release the Simplex or Duplex button on the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
ABOUT THE ONETOUCH PROPERTIES WINDOW
The OneTouch Properties window is where you can select new settings
for the buttons. The OneTouch Properties window also has special
scanning features such as scanning to a CD, scanning and converting
text directly into an HTML web page, and scanning with optical
character recognition (OCR) that turns a scanned image into text that
you can edit.
Note: Some of the options on the OneTouch Properties Window
(and other OneTouch windows and dialog boxes) are “grayed out”
and are not available. Grayed out options are not appropriate for your
Visioneer Strobe XP 470 scanner. For example, on the figure below,
the option “Use Document Feeder” is selected and “grayed out”
because the Visioneer Strobe XP 470 is an ADF scanner and always
uses the document feeder, so there’s no reason for you to select it. If
you use the OneTouch application with other Visioneer scanners,
grayed out options become active, if appropriate.
The following example of the OneTouch window shows the settings for
Button 2. The button is set to scan with the scan configuration named
Color Document and then open ScanSoft PaperPort to display the
scanned image. The Format and Page(s) option is set to scan in the PDF
image format.
Click to select
options.
The button number
and name.
The file format of
the images of the
scanned item.
The Destination
Application. This is
the application that
opens when you are
finished scanning.
The settings that the
scanner uses when
scanning with the
currently selected
button (in this case
button 2).
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
37
Select Destination—The list of applications that can open to display
the scanned image for the selected button. To configure the list of
available applications, click the Options tab at the top of the dialog box
and select the desired options. See “Selecting Options for a Button” on
page 55 for more information.
Select Configuration—The list of available scan configurations for the
selected button. The configuration settings include: scanning mode,
resolution (dpi), page size, brightness, color saturation, hue, and
gamma. To see a selected scan configuration’s settings, click its icon.
Click the icon again to close the detailed information.
Click the icon of a selected
configuration
to view its settings.
The icons next to each scan configuration indicate the scanning mode.
Color Black and White Grayscale
Configure
Before Scan
Note: Use Configure Before Scan if you want to set the scanning
mode manually before scanning. See “Configuring Before Scanning”
on page 68.
You can also click the Edit button or double click the configuration to
see more detailed information about the selected configuration.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Select Format and Page(s)—A set of file formats for the scanned image
for the selected button. The formats are based on the type of destination
application you select. This example shows the formats that apply to the
PaperPort Desktop.
The button names indicate their file types. See “Selecting Page Format
Options” on page 49 for more about the formats.
Options tab—Displays a window for selecting options related to the
selected destination application for the scanned image.
SELECTING NEW SETTINGS FOR A BUTTON
For each of the nine OneTouch buttons, you can select a new
Destination Application, Scan Configuration, and Document
Format.
Click these arrows to see the
properties for the button whose
settings you want to change.
Select a format for
the scanned image
Select a software application as
the destination to send scanned
documents.
Select a configuration
for scanning the item.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
39
To select new settings for the Scanner Button:
1. Click the button selection arrows to select the button you want to
change.
Each button has its own settings. So, as you click the arrows to cycle
show them for each button.
2. From the Select Destination list, select the application where you
want documents sent when scanning is finished.
See “Selecting Options for a Button” on page 55 to display a full list
of the Destination Applications that you can use with the scanner.
Note: If you select a word processing program such as Microsoft
WordPad or Microsoft Word and a page format that can be used for
OCR (such as Text, RTF, Word, sPDF, or nPDF), the text in scanned
images is automatically converted to word processing text. See
“Scanning with Optical Character Recognition (OCR)” on page 70
for details.
3. From the Select Configuration list, select a scan configuration.
To scan in color, select one of the configurations indicated by the
small color icon, such as the Color Document configuration.
The scan configuration list is preset for the application you select in
the Select Destination list. If you select a different application, the
configurations are for that application. However, you can create
your own scan configurations as well.
4. Select a Format and Page(s) option.
The available options apply to the Destination Application you
select. For example, if you select Microsoft Word as the Destination
Application, the available formats are for text, such as .doc, .txt, and
.rtf. But if select Microsoft Paint as the Destination Application,
then the available formats are for graphics, such as .bmp, and .jpg.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
5. Click OK, or if you want to keep the window open and work with
other features, click Apply.
Now when you press or click a scanner button, the document is
scanned using the newly configured settings for that button.
SETTING DESTINATION APPLICATION PROPERTIES
The different types of Destination Applications have various properties
that you can select.
1. On the OneTouch Properties window, click a Destination
Application.
2. Click the Properties button.
ClickaDestination
Application.
Click the Properties
button
A OneTouch 4.0 Link Properties dialog box appears for the type of
Destination Application you selected, and the available options are
for that type of application.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
41
PAPERPORT PROPERTIES
These properties apply to PaperPort, and are for designating the folder
to receive your scanned items.
1. Select the PaperPort folder where you want the file of the scanned
image to be located.
2. Click OK.
3. Click OK or Apply on the OneTouch Properties window.
When PaperPort opens after you finish scanning, the thumbnails of
your scanned documents are on the Desktop in that folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
TEXT DOCUMENTS PROPERTIES
These properties apply to Microsoft Word, Excel, Adobe Reader, and
the other applications indicated by their icons in the list. The properties
apply to the OCR settings for the applications.
1. Click in the OCR settings boxes for the options you want.
The options will apply to all the applications in the group.
Always send a file, even when no text was found—The scanned
file is sent to the OCR reader even if the image does not appear to
contain text. This could occur if you scanned a photograph with a
OneTouch button set for text applications.
Show message if text recognition failed—A message will appear
on the screen if the OCR reader does not detect text in the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
43
2. To add another application to the list, click the Add Application
button.
The Add Text Based Link dialog box appears.
3. Click Browse to find the application you want to add to the list.
When you select the application using the Browse button, steps 1,
and 2 on the dialog box are automatically filled in, and the
application icon appears in step 3.
4. Select the icon in Step 3.
To select the options in step 4 on the dialog box, refer to the
documentation that you received with the application to see which
text formats it supports.
The boxes you select here determine the Page Format icons that
appear on the OneTouch Properties window for that group of
applications.
5. Click the Add button.
6. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
IMAGE DOCUMENTS PROPERTIES
These properties apply to ScanSoft OmniPage Pro 12 that you received
with your scanner, plus Microsoft Paint and other image processing
applications.
1. Click in the Color document handling settings boxes for the
options you want.
The options will apply to all the applications in the group.
Convert Bitmaps using Screen Resolution—Use this option to
ensure that an image will fit on the computer’s screen. When a
computer screen is set to a lower resolution, bitmap images with a
higher resolution may be too big to fit on the screen. Converting
the bitmap image to match the screen resolution ensures that the
image fits on the screen.
Convert Bitmaps to JPEG—JPEG files can be compressed to
produce smaller file sizes and, therefore, shorter transmission times.
Use this option to provide that compression capability to image
files.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
2. To add another application to the list, click the Add Application
button.
See the steps on page 43 to add an application to the list.
3. Click OK.
4. Click OK or Apply on the OneTouch Properties window.
STORAGE PROPERTIES
These properties apply to the Destination Application named Transfer
to Storage. If a CD burner is attached to your computer, you also use
this dialog box to start the Burn to CD process.
Note: If you do not have a CD burner attached to your computer,
the CD options are not shown on the dialog box. The Burn to CD
option is only available for Windows XP.
1. Click the Storage Layout options you want.
All documents are in the root—The scanned documents are saved
in the root of the folder specified in the Storage Location.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Documents are put into folders by month, week, or type—
Folders are created based on your selection (month, week, or type)
and the scanned documents are saved in those folders. New folders
are created for each month and week so you can keep track of when
you scanned the documents.
2. Click the Browse button to specify the location to store the
scanned documents, or type a location directly into the box.
If you are scanning to a shared network drive, it must be a mapped
drive. For more information about mapped drives, see your
network administrator.
3. If you have a CD burner attached to your computer, the option
Show message when ready to burn 5" CD (700MB), should be
selected.
You’ll see a message when it’s time to click the Burn to CD button.
4. Click OK.
5. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
47
EMAIL PROPERTIES
These properties apply to eMail applications so you can specify the
folder for documents that you will attach to an eMail message.
Microsoft Outlook and AOL Version 9 accept direct attachment of
documents to a blank eMail message as soon as scanning is finished, but
other eMail applications do not. If you’re using one of those
applications, you need to know which folder contains the scanned
documents so you can manually attach them to your eMail messages.
choose a folder for your eMail attachments.
2. Click the Browse button to specify the location to store them, or
type a location directly into the box.
See the steps on page 45 to add an application.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
3. If you are using America Online (AOL) on your computer, and the
folder name for AOL is incorrect, click the Browse button and find
the correct AOL folder.
Normally the folder that AOL uses to store attachments will be
listed in the box. For AOL versions prior to version 9.0, the folder
has to be the specific folder AOL uses to find attachments. AOL
9.0, however, can attach documents automatically after scanning is
finished.
4. If you need to set or change any internet options for AOL click the
Internet Options button.
The Windows Internet Options Control Panel appears. See your
Windows documentation and AOL user manual for the settings on
the Windows Control Panel.
5. Select the options for color document handling.
Convert Bitmaps using Screen Resolution—Use this option to
ensure that an image will fit on the computer’s screen. When a
computer screen is set to a lower resolution, bitmap images with a
higher resolution may be too big to fit on the screen. Converting
the bitmap image to match the screen resolution ensures that the
image fits on the screen.
Convert Bitmaps to JPEG—JPEG files can be compressed to
produce smaller files sizes and, therefore, shorter transmission
times. Use this option to provide that compression capability to
image files.
6. Click OK.
7. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
49
SELECTING PAGE FORMAT OPTIONS
The Page Format options that you select determines the file format of
the scanned document. Appropriate page format options and file types
are available for the type of Destination Application selected for the
button.
The available options are for images and text.
Image Formats
Text Formats; sPDF is only one
of several text formats available.
The Text Formats are for text file types. The names of the formats
indicate their file types. See “Text Formats” on page 51 for details.
IMAGE FORMATS
Select an image file format for photos, artwork or other documents that
you want to save as images. BMP and TIFF are standard image file
formats generally used if you want to do additional image processing,
such as photo touch-up or color correction. Both of those file formats
tend to be larger than the JPEG format.
Because JPEG image files can be reduced in size, the JPEG format is
often used for images on web pages, or if file size might be a problem
when electronically sending the files. JPEG files are reduced in size by
lowering their image quality, and you can select the degree of quality for
your scanned images from the JPEG file format icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
The PDF format is often used to create images of text pages. You may
want to select PDF as the page format when scanning text pages that do
not require OCR processing or other processing. The PDF format is
also used to put multi-page documents on web sites as pdf-readable
or quality.
Note: The two other PDF formats—nPDF and sPDF—are for
scanning with OCR processing and with the ability to search the
scanned text. See the next section, “Text Formats,” and also
“Scanning with sPDF or nPDF and Searching for Text” on page 79
for details.
To select a JPEG or PDF file size:
1. Select JPG or PDF as the page format.
2. Right-click on the JPG or PDF icon.
A menu appears.
3. Choose the file size/image quality option for your scanned images.
Minimize Size—Smallest file size, lowest image quality.
Normal—Medium file size, some loss of image quality.
Maximum Quality—Largest file size, no loss of image quality.
Your selection pertains only to the button currently selected on the
OneTouch Properties window. Other buttons that have JPG or
PDF selected as the Page Format are not affected, so you can set the
JPEG or PDF file size/image quality independently for each button.
4. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
51
Selecting the text format option also selects OCR processing as an automatic
step for scanning. Therefore, when you scan a document with the text format
selected, the text portions of the document are automatically converted to
editable text. See “Scanning with Optical Character Recognition (OCR)”
on page 70.
Select a text format for documents with text or numbers, such as a
business letter, report, or spreadsheet. The text format icon has several
file formats available, depending on the Destination Application you
select.
The specific file format is the file name extension on the text format
icon.
The specific text format; this example
is for Microsoft Word format (.doc).
As you select Destination Applications that are text applications, the
text format icon changes to match the file type of the application. In
some cases, the Destination Application supports several file types, and
you can right-click on the icon to choose the particular file type for that
application.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
To select a file type for the text format:
1. Select the Destination Application.
2. Right-click on the text format icon.
A menu appears. The following figure shows samples for different
formats.
Example menu for the
DOC text format.
Example menu for the
nPDF text format.
3. Choose the file type that you want for the text format.
Your selection of a file type pertains only to the button currently
selected on the OneTouch Properties window. Other buttons that
have a text option selected as the Page Format are not affected, so
you can set the text file type independently for each button.
Simple Text—The .txt file format. Text with no formatting; used
by the standard Microsoft Notepad application.
Rich Text Format—The .rtf file format. Text that retains
formatting when converted. Available with Microsoft Wordpad and
Word.
Word Document—The .doc file format used by Microsoft Word.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
53
Comma Delimited—The .csv file format; used for database or
spreadsheet data with fields separated by commas. When the
document is converted into editable text by the OCR software, the
fields are maintained so you can copy and paste them to a database
or spreadsheet application.
Excel Spreadsheet—The .xls file format used by Microsoft Excel.
HTML Document—The .htm file format used to create web
pages.
Searchable PDF—The .sPDF file format used by Adobe Acrobat
and OmniPage Pro 12. This format converts scanned text into PDF
with text search and OCR capabilities. It is only available if you
have installed OmniPage Pro 12 on your computer. See “Scanning
with sPDF or nPDF and Searching for Text” on page 79 for details.
OmniPage Pro 12. This format also converts scanned text into PDF
with text search and OCR capabilities, plus you can edit the text in
an nPDF image if you have a PDF editing program. The nPDF
format is also only available if you have installed OmniPage Pro 12
on your computer. See “Scanning with sPDF or nPDF and
Searching for Text” on page 79 for details.
4. To change the OmniPage OCR settings, choose OCR Options.
Application is NotePad or Microsoft Internet Explorer.
The OCR Options provide a series of selections for the OCR
feature when you scan text. This menu option is only available if
you have installed OmniPage Pro 12 on your computer. See “Using
OmniPage OCR Options” on page 71 for details.
Note that the OCR Options settings apply to all buttons. If you
change them for one button, those changes apply to the other
buttons as well.
5. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
RENAMING A ONETOUCH BUTTON
The OneTouch buttons have names that identify their pre-set functions,
such as OCR and PDF, but you can edit the names.
To change the button names:
1. Open the OneTouch Properties window.
2. Using the arrows, choose the button that you want to rename.
3. Select the name’s text and type a new name.
Click the arrows to get to the button
to rename, then select the name text.
Type a new name for the button.
4. Click OK or Apply.
The button is now renamed.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
55
SELECTING OPTIONS FOR A BUTTON
The OneTouch Options determine the types of Destination
Applications available for a button, as well as the location of the files of
your scanned items.
To select options:
1. Open the OneTouch Properties window and click the Options tab.
Options tab
2. Click the menu arrow and choose the button for new options.
3. Select button options as described below.
Show All Destinations—This option selects all the Destination
Application categories. The list of Destination Applications
available for the selected button will include all the applications on
your computer that fall into these categories. This is the default
selection for Button 8. The list also includes printers and other
devices connected to your computer so, for example, you can scan
an item and have it printed immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Select Destinations—Select this option to individually choose the
types of applications to include in the list of Destination
Applications. Check the boxes for the type of application to
include.
■ Document Management includes PaperPort and other applications
for processing and keeping track of your scanned documents.
■ Text Editors include Microsoft Word and WordPad, Microsoft
Excel, and other word processing and spreadsheet applications.
Select this option if you want OCR processing to convert your
scanned documents to text that you can edit. See “Scanning with
Optical Character Recognition (OCR)” on page 70 for more
about OCR.
■ PDF applications are for documents scanned to PDF format.
your scanned documents are added to a blank eMail message.
■ Storage and CD-R/W is for either storing scanned documents in a
folder, or sending them to a CD burner to create a CD containing
the scanned documents. See “Transferring Scanned Documents to
Storage” on page 89 and “Scan and Burn to a CD” on page 82 for
details.
your printer or fax software for faxing.
■ Sti event forwarding is for using another application’s interface for
scanning. The OneTouch Event Forwarding dialog box appears so
you can select which application to use to continue scanning. See
“Scanning with Event Forwarding” on page 84 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
57
4. After selecting a new category of Destination Applications, click the
Multi Function tab to see which ones are added to the list.
Show Progress Window—Select this option to display the progress
window of the document(s) during scanning.
Create copies of scanned documents—Select this option if you
want a copy of your scanned documents to be saved in the folder
specified in the Folder Copy Options section. Note that these
copies are in addition to the scanned files sent to the Destination
Application. For example, if the Destination Application is
Microsoft Word, two copies are saved—one in the Word folder and
the other in the copy location folder. This option is not available if
you have Document Management or Storage and CD-R/W
selected as the Destination Application type.
Folder Copy Options—Type the name and path of the folder
where you want to store copies of scanned documents, or click the
Browse button and find the folder for the copies. Select the
grouping option for the documents. The Group by button option
groups the documents under the name of the OneTouch button.
For example, if the button is named Printer, the documents are
grouped under the name Printer. Group by type groups the scanned
documents by the type of file, such as .doc or .jpg. If you also want
to group them by date you can choose the week and month
options.
5. Click OK to save the options for the selected button.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
CREATING A NEW SCAN CONFIGURATION
The scan configurations are where you select the scanning resolution,
brightness, mode (color, black&white, or grayscale), and a number of
other settings.
The Scan Configurations.
The Lock Icon.
Click New to create a
new Scan Configuration.
Note the lock icon on the preset configurations. Although you can
unlock and edit the preset configurations, we recommend that you leave
them locked, and only add new configurations. That way, you will
always have the original factory-set configurations available.
To create a new configuration:
1. Open the OneTouch Properties window and make sure the Multi
Function tab is selected.
2. Scroll through the applications in the Select Destination list and
click the type of application for which you want to create a new
scan configuration.
When you create a new scan configuration, it will appear for the
buttons that are set for the same types of Destination Applications.
For example, if you create a new configuration for a button that is
set to show image editor applications, that new configuration also
appears for any other buttons set for image editors, but not for
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
59
buttons set for text editing applications. Thus, you can create
specific sets of scan configurations for specific functions and they
appear only when appropriate.
3. Click the New button.
If you want to start from the settings of another configuration,
select the configuration, then click the Copy button.
If the Scan Settings tab is not selected, click it.
4. On the Scan Configuration Properties dialog box, type a name.
TIP: If you’re going to set up the new configuration to scan duplex
(two-sided), include that in the name, such as “Scan for Dark Print
(Duplex),” to remind you that it is a duplex scan.
If the configuration
is locked, click the
lock to unlock it.
The icon becomes a
key.
Type a new name for
the configuration.
Select the scan mode
and drag the slider to set
the resolution.
Drag the sliders to set
the Brightness and
Contrast.
Note: If you select a printer or other device in the Select Destinations
list, the dialog box may have an additional Device Settings tab for
setting specific options for the particular device.
5. Select scan settings for the new scan configuration.
Mode—Select a scanning mode:
■ Black&White to scan in black and white. For example, letters and
memos are usually scanned in black and white. This scan mode
produces the smallest file size.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
■ GrayScale to scan items such as documents containing drawings
or black and white photographs. The scanning produces an image
of up to 256 shades of gray.
■ Color to scan color photographs and other color items. Color
scans have the largest file size.
Resolution—Drag the slider to the right or left to adjust the dots
per inch (dpi) of the resolution. The maximum resolution is 600
dpi; the minimum is 50 dpi. The higher the dpi setting, the
sharper and clearer the scanned image. However, higher dpi
settings take longer to scan and produce larger files for the scanned
images.
Brightness and Contrast—Sometimes an item is scanned with
the brightness and contrast set too light or too dark. For example,
a note written with a light pencil may need to be scanned darker to
improve legibility.
Brightness refers to the lightness or darkness of the image.
Contrast is the range between the darkest and lightest portions of
the image. The greater the contrast, the more difference between
the lighter and darker shades in the image.
Drag the sliders to the right or left to adjust the brightness and
contrast of the scanned image. The Contrast setting does not
apply to the Black&White mode.
6. If you want to lock the configuration, click the lock icon to change
it from a key to a lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
61
7. Click the Page Settings tab to select page settings.
Click to toggle
between inches
and centimeters.
Size—Click Standard, click the menu arrow and choose a page size
from the list, or click Custom and enter the horizontal and vertical
page dimensions in the boxes. The maximum size is 8.5" x 14". The
units of measurement can be inches or centimeters. Click the name
of the units, inches or centimeters, to toggle between them.
Improvements and Settings—Only the options that apply to the
selected Destination Application are available.
■ AutoCrop to Original—Select this option to let the scanner
automatically determine the size of the item being scanned. For
example, if you scan a 5 by 7 inch photo, the scanner will
determine the size of the photo.
When using the AutoCrop to Original option, always use the paper
guides on the scanner so the page is not skewed. Skewed pages may not
scan properly.
For single-sided scans, the scan area is the size of the image. For
double-sided scans, the scan area is the size of the larger of the two
areas on the front and back of the page.
■ Straighten Image—Select this option to let the scanner
automatically determine if a page is skewed, and then straighten its
image. The scanner detects page edges and can sense when the
page is fed through at an angle. However, if the page is fed through
Download from Www.Somanuals.com. All Manuals Search And Download.
62
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
at too great an angle, the image may not scan correctly. In that
case, re-scan the page using the paper guides to feed the paper in
straight.
■ Reduce Moire Patterns—Moire patterns are wavy, rippled lines
that sometimes appear on the scanned images of photographs or
illustrations, particularly newspaper and magazine illustrations.
Selecting Reduce Moire Patterns will limit or eliminate moire
patterns in the scanned image. This option is only available for the
Grayscale or Color Mode at 200dpi or less.
■ Invert Image—Only available for Black&White Mode, this
option reverses the black and whites of an image.
Original Image
Inverted Image
■ Duplex—Scan both sides of the page. If this option is not
selected, the scanner will scan the front side of the page only.
Note: Because you can set Duplex and Simplex for the OneTouch
buttons, there could be a conflict when you press the Simplex or
Duplex button on the scanner. Regardless of the OneTouch setting,
the scanner button always takes precedence. In other words, even if
the LED number on the scanner has a setting for Duplex, when you
press the Simplex scanner button the scanner scans in Simplex mode,
and vice versa.
■ Skip Blank Originals—Skips pages that are completely blank.
Typically you use this option when you will scan a stack of two-
sided pages which have a number of blank sides. This option is
only available for Duplex scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
63
■ Color Filter—Color filter is the ability of your scanner to
automatically remove a color from a scanned item. For example, if
you are scanning a letter with a red watermark, you can choose to
filter out the red so the scanned letter just shows the text and not
the red watermark. Color filter applies to Black&White or
Grayscale Mode.
The original with a red wa-
termark over black text.
The scanned item with the
red filtered out.
8. Click the Advanced Settings tab.
The options of the Advanced Settings tab are for the Color or
Grayscale scanning mode.
Saturation is the strength or purity of a color, hue is the color your
eyes see as reflected from the image, and gamma controls the
brightness of the midtones of the color.
9. Drag the sliders to the left and right to change the color settings. As
you do, the image changes to show the effects of the new settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
10. Click OK to save the new configuration.
It will now appear in the list of Scan Configurations on the
OneTouch Properties window for the appropriate Destination
applications.
THE DEVICE SETTINGS TAB
A Device Settings tab appears on the Scan Configurations dialog box
when your selected Destination Application sends the scanned image to
a printer, fax application, or other device. You use the options on the
Device Settings tab to select settings for the device.
1. Click on the Device Settings tab.
Fit to page, reduce image if necessary—If the scanned image is
too big to be printed or faxed on a single page, the image will
automatically be reduced to fit the page.
Actual size, crop image if necessary—If the scanned image is to
big to be printed or faxed on a single page, the image will
automatically be cropped around its edges to fit on the page.
Center image on page—The image will be printed in the center of
the page instead of at the top right corner.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
65
Maintain aspect ratio—The aspect ratio is the length-to-width
relationship of the image’s dimensions. Select this option so the
image’s relative proportions remain constant.
AutoRotate image for best fit—If the image is a Landscape format
and the device is printing in the Portrait mode, or vice versa, rotate
the image to fit on the page.
Collate copies—If you’re printing more than one page, collate the
copies. Enter the number of copies in the Copies box.
Advanced—Click to see additional settings for the device. The
dialog that appears is specific to the device. For example, if the
device is your printer, the dialog box is your printer’s setup settings.
2. Click OK or Apply.
THE STORAGE OPTIONS TAB (ARCHIVE)
A Storage Options tab appears on the Scan Configurations dialog box
when the selected Destination Application is set as Transfer to Storage.
You use the options on this tab to select where you want to save your
scanned items for storage when scanning with that particular Scan
Configuration. Button 7 is set as the default Archive button for
scanning to storage, with Transfer to Storage as the destination. So if
you want to have the Scan Configuration apply to Button 7, switch to it
first before creating the new Scan Configuration.
override the storage options that apply to the Storage Properties. This
means that you can create separate Scan Configurations to store
scanned items at various locations in addition to the main location set
by the Storage Properties. See “Storage Properties” on page 45 and
“Transferring Scanned Documents to Storage” on page 89 for more
details.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
1. Click on the Storage Options tab.
2. Click the Storage Layout options you want.
All documents are in the root—The scanned documents are saved
in the root of the folder specified in the Storage Location.
Documents are put into folders by month, week, or type—
Folders are created based on your selection (month, week, or type)
and the scanned documents are saved in those folders. New folders
are created for each month and week so you can keep track of when
you scanned the documents.
3. Click the Browse button to specify the location to store the
scanned documents, or type a location directly into the box.
4. Click OK or Apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
67
EDITING OR DELETING SCAN CONFIGURATIONS
To edit or delete a scan configuration:
1. Open the OneTouch Properties window.
2. Select the scan configuration you want to edit or delete.
Select the scan configuration
to edit or delete. It must be
unlocked, as indicated by not
having a lock displayed here.
3. To delete the configuration, click the Delete button.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
4. To edit the configuration, click the Edit button.
The Scan Configuration Properties dialog box opens for that
configuration.
To edit or delete a configuration, it must first be unlocked. Click
the Lock icon to unlock the configuration. Clicking it toggles
between locking and unlocking the configuration.
Click the Lock icon to
toggle between locked
and unlocked.
5. Edit the settings and click OK.
6. Click OK to close the dialog box.
CONFIGURING BEFORE SCANNING
You can manually configure the scan settings before beginning the
scanning process. In that case, you select Configure Before Scan as the
Scan Setting. When you press a scan button, one of the scanning
interfaces appears for you to set the scanning options.
To configure before scanning:
1. Open the OneTouch Properties window.
2. Using the arrows, choose the button that you want to set to
configure before scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
69
3. Select the scan configuration Configure Before Scan.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on Configure
Before Scan to get the
menu, and choose the
interface to use for
configuring.
4. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The Basic Interface or Advanced Interface appears for
you to configure the scanning. See “Scanning from the Basic
Interface or Advanced Interface” on page 96.
VirtualReScan—The Kofax VRS TWAIN interface appears for
you to configure the scanning.
ISIS—The ISIS Scan interface appears for you to configure the
scanning.
WIA—The Windows Image Acquisition Interface (WIA) appears
for you to configure the scanning. See “Scanning with the Windows
Image Acquisition” on page 119.
Note: The WIA option is only available if your computer is running
Microsoft Windows XP or Me.
5. Click OK or Apply on the OneTouch Properties window.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
SCANNING WITH OPTICAL CHARACTER RECOGNITION (OCR)
Optical Character Recognition (OCR) is like a printer in reverse.
Instead of printing what’s on the screen onto paper, OCR converts text
and numbers on a scanned page into editable text and numbers. You can
then work with the text and numbers to edit, spellcheck, change font or
type size, sort, calculate, and so forth.
The OCR process is automatic when the format you select for the
Destination Application is a Text format, such as DOC, TXT, XLS, or
RTF. In other words, when you scan a page and send it to a text
application, the words and numbers on the scanned page are
automatically converted to editable text so you can then work with
them in the application.
The OmniPage 12 software that you received with your Visioneer
Strobe XP 470 scanner offers additional options for OCR. See the next
section, “Using OmniPage OCR Options” on page 71 for details.
Note: OneTouch Button 6 is preset as your OCR button. But you
can also set up any other button to scan and OCR the text.
To scan with OCR:
1. Use any of the following methods:
■ To scan using the buttons on the scanner, press the Destination
Selector until the LED is at 6, then press the Simplex or Duplex
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
71
■ To scan from the OneTouch Button Panel, click the OneTouch
icon in the Windows system Tray, click the arrows to see Button 6,
then click Button 6.
Click the arrows until
Button 6 is on the panel,
then click Button 6.
■ To scan from the OneTouch Properties window, select a
Destination Application that has one of the Text formats.
2. Now scan the document.
Your scanned pages appear in the Destination Application with
their text ready for editing and other text processing.
Note: OCR scanning is also for spreadsheets so you can work in
Microsoft Excel (or other spreadsheet application) with the figures and
text from the original spreadsheets.
USING OMNIPAGE OCR OPTIONS
The OmniPage OCR Options are only available if you have installed
OmniPage Pro 12 on your computer. OmniPage Pro 12 is on the Disc 2
CD that you received with your scanner in case you haven’t installed it
yet.
Note: OmniPage OCR options apply globally to all the OneTouch
buttons that perform OCR. For example, Button 6 is set by default to
OCR text, but Button 8 is not. If you reconfigure Button 8 to also
OCR text, the OCR options you select for Button 8 will also apply to
Button 6.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
To select OmniPage OCR options:
1. Open the OneTouch Properties window.
2. Using the arrows, choose a button that has Destination
Applications that use the text format as their file type.
3. Select the Destination Application to get one of the text format file
types as the page format.
4. Right-click on the page format icon to see the menu.
5. Choose OCR Options from the menu.
The OmniPage OCR Options window opens with the OCR tab
selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
73
6. Choose the options you want from the OCR window.
Languages in Document—Select the language(s) in the documents
to be scanned. These are the languages that will be recognized
during the OCR process. For faster and more reliable language
recognition, select only the languages in the document.
The languages at the top of the list are your recent choices. Below
that the languages are in alphabetical order. Type a letter to jump to
one of the languages in the list.
The dictionary icon indicates a language with dictionary support
available. The dictionary is consulted to help in the OCR process.
It can also offer suggestions during proofing.
User Dictionary—A user dictionary is your personal dictionary
with words that you want the OCR proofreading process to
recognize as legitimate words. For example, if you scan documents
with highly technical terms not found in typical dictionaries, you
can add them to your personal dictionary. You can also add names
that you expect to be in the documents too. That way, when the
OCR process proofreads the text, names will not be considered
misspelled words.You can create multiple user dictionaries.
Click the menu arrow and select a user dictionary from the list. Any
Microsoft Word user dictionaries detected on your computer
system are also listed. A dictionary named Custom is your default
Word dictionary.
To create a user dictionary, click the button next to the menu arrow.
Click New, type a name for the dictionary, and click OK. Click
Close and then choose your new dictionary from the list. It will be
used during the OCR process. You add words to a dictionary
during the proofreading process. To turn on the proofreading
process for your scanned documents, see the OmniPage Pro 12
documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Professional Dictionaries—These are legal and medical dictionaries
containing highly specialized words and phrases. The options are:
Dutch Legal, Dutch Medical, English Legal, English Medical,
French Legal, French Medical, German Legal, and German
Medical. Click the checkbox next to a dictionary name to select it.
Reject Character—This is the character that the OCR process
inserts for an unrecognizable text character. For example, if the
OCR process cannot recognize the J in REJECT, and ~ is the reject
character, the word would appear as RE~ECT in your document.
The ~ is the default reject character.
Type the character you want to use in the Reject character box. Try
to choose a character that will not appear in your documents.
Font Matching—Your computer system usually has a number of
fonts available for the OCR process to use to recognize text.
However, not all of the fonts may be selected for the OCR process.
Using Font Matching you can select the fonts on your computer
that match the fonts in your documents.
Click the Font Matching button to see the Font Matching dialog
box.
The list on the left are the fonts available on your computer system.
The list on the right are the fonts that will be used by the OCR
process to recognize the text in your documents. If possible, the list
of Fonts for your document should include all the fonts in the
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
75
documents you plan to scan. To add new fonts to that list, select a
font in the Fonts on System list and click Add. Note that when
you select a font, a sample appears in the text box so you can
compare it with the fonts in your document to see if that’s the right
font. To remove a font, select it and click Remove. To return the
lists to their defaults, click Use Defaults. Click OK when you’re
finished.
7. Click the Process tab and choose the options from the Process
window.
When bringing in a new image—Click the menu arrow and select
where you want new pages added to your current document. The
choices are After last page, After current page, Before current
page, and Before first page.
Automatically prompt for more pages—Select this option if the
document is too big to fit into the scanner’s paper guide.
Automatically correct page orientation—Select this option to have
the OCR process check orientation and automatically rotate an
improperly oriented page image by 90, 180 or 270 degrees prior to
recognition. All pages are automatically straightened (de-skewed) if
necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Retain text and background color—If your document contains
colored text or backgrounds, select this option to have them
detected and displayed in the text editing application you have
selected. The colored text and backgrounds will also be available for
export. Deselect this option if you want color pictures in the
document but do not want colored text and backgrounds. You can
change the color of texts and backgrounds in the OmniPage Pro 12
Text Editor.
Retain inverted text—Inverted text is white or pale letters on a
black or dark background. Select this option to retain inverted text,
deselect it to have inverted text transformed to normal text of black
text on a white background.
Look for facing pages—Select this option if you want to scan two
facing pages of an open book in one step, and then to recognize and
store them as two separate pages (as if they had come from two
separate scannings).
User interface language—English is the interface language.
8. Click the Format tab and choose the options you want from the
Format window.
Note that as you select formats, the image changes to represent the
selection so you can see, at a glance, what the layout will look like.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
77
Automatic—Choose this option to let the OCR process determine
the layout of the pages. It is the fastest type of format processing.
Typically you select this option when the document has different or
unknown types of layouts, pages with multiple columns and a table,
or pages containing more than one table. The OCR process will
then determine if text is in columns, an item is a graphic or text,
and tables are present.
Single Column no Table—Choose this option if the document
contains only one column of text and no tables. Business letters are
normally in this form. You can also use this option for documents
with words or numbers in columns if you do not want them placed
in a table or decolumnized or treated as separate columns.
Multiple Columns, no Table—Choose this option if some
document pages contain text in columns and you want it kept in
separate columns, similar to the original layout. If table-like data is
encountered, it is placed in columns, not in a gridded table.
Single Column with Table—Choose this option if your document
contains only one column of text and a table. The table will be
placed in a grid in the text editing application you have selected.
You can later specify whether to export it in a grid or as tab-
separated text columns.
Spreadsheet—Choose this option if the entire document consists of
a table that you want to export to a spreadsheet program, or have
treated as a table. No flowing text or graphics zones will be
detected.
Template—If you created a zone template in OmniPage Pro 12,
choose a zone template file to have its background value, zones and
zone properties applied to all OCR scanned pages from now on.
No Formatting (NF)—The document will be plain text,
decolumnized and left-aligned in a single font and font size. You
can export plain text to nearly all file types and target applications,
and graphics, tables and bullets can be retained. When exporting to
Text or Unicode file types, graphics and tables are not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Retain Fonts and Paragraphs (RFP)—This output format retains
the font and paragraph styling, including graphics and tables
without columnized text. This output format is available for nearly
all file types.
Flowing Page (FP)—This format keeps the original layout of the
pages, including columns. This is done wherever possible with
column and indent settings, but not with text boxes or frames. Text
will then flow from one column to the other, which does not
happen when text boxes are present.
True Page (TP)—This output format keeps the original layout of
the pages, including columns. This is done with text, picture and
table boxes and frames. True page is offered only for target
applications capable of handling the formatting. True Page
formatting is the only choice for XML export and for all PDF
export, except to the file type “PDF Edited”.
9. When you’re finished selecting the OCR options, click OK on the
Options window.
These options will now apply to the OCR processing when you
select any scan button with a text format as the page format.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
79
SCANNING WITH SPDF OR NPDF AND SEARCHING FOR TEXT
Searchable PDF (sPDF) and Normal PDF (nPDF) are special forms of
an Adobe PDF file. sPDF converts scanned text into the PDF format
with text search and OCR capabilities. nPDF has those same features,
plus you can edit the text in an nPDF image if you have a PDF editing
program.The two PDF formats can also produce images with different
image quality, so you may want to experiment with them to determine
which is better for your scanned documents. sPDF and nPDF are only
available as page format options if you have installed OmniPage Pro 12
on your computer.
To scan with sPDF or nPDF:
1. Open the OneTouch Properties window.
2. Using the arrows, choose a OneTouch button to use for the sPDF
or nPDF scanning.
3. Select a Destination Application that uses a text format as the page
format.
4. Right-click on the text format icon.
5. Choose the Searchable PDF or Normal PDF option for the page
format.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Note: Not all Destination Applications have the sPDF and nPDF
options. Microsoft Word, for example, does not have them as scanning
options.
The settings for the button (button 8 in this example) now show
your page format selection.
The page format
icon is now set to
the selection from
the menu.
6. Choose a Scan Configuration.
7. Click Apply or OK.
8. Now scan with that button and the scanned document will be in
the sPDF or nPDF format that was selected for the button.
Note: The Transfer to Storage selection for a Destination Application
also has the sPDF and nPDF options. That means you can scan and
store items directly to a server in these formats.
9. To search for the text, open Adobe Acrobat Reader or Adobe
Acrobat.
10. From the Adobe Acrobat File menu choose Open, and open the file
you just scanned.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
81
11. From the Adobe Acrobat Edit menu choose Find.
The Find dialog box appears.
12. Enter the text you want to find, and click the Find button.
See the Adobe Acrobat user manual for more about finding text in a
PDF file, or about editing PDF text.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
SCAN AND BURN TO A CD
If you have a CD burner attached to your computer, you can scan
directly from your Visioneer Strobe XP 470 scanner onto a CD. This
feature is available only on computers running Windows XP.
To scan and burn to a CD:
1. Put a blank CD into your computer’s CD Drive.
2. Open the OneTouch Properties window.
3. Using the arrows, choose a button to use for scanning and burning
to a CD.
4. Select Burn to CD as the Destination Application.
The Burn to CD Destination Application is only available if you
have a CD burner attached to your computer, but you do not need
to have a CD in the burner to select the destination.
5. Choose a Page Format and a Scan Configuration.
6. Click Apply or OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
83
7. Now start scanning using the button you selected to use to scan and
burn to CD.
When scanning is finished, a bubble message on the screen tells you
that files are waiting to be burned to the CD.
8. On the OneTouch window, make sure that the Burn to CD
Destination Application is still selected and click the Properties
button.
The OneTouch 4.0 Link Properties window appears,
9. Make sure a CD is in the CD burner.
10. Click the Burn to CD button.
The CD burner begins and your scanned documents are written to
the CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
SCANNING WITH EVENT FORWARDING
If you want to specify an application to use for scanning at the start of
the process, you can use event forwarding. The scanner will feed in the
first page, but will then stop until you select the application to use. After
you select the application, its interface will open and you can use it to
continue with the scanning.
To scan with event forwarding:
1. Open the OneTouch Properties window.
2. Using the arrows, choose a button to use for the event forwarding.
3. Select Still Image Client as the Destination Application.
Note that you cannot choose a page format for this option because
the actual destination application is not selected until after the
scanner feeds in the first page of your document.
4. Choose a Scan Configuration.
5. Click Apply or OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
85
6. Start scanning using the button you selected for event forwarding.
A dialog box appears for you to select the application to use for
scanning.
7. Select the application in the box and click OK.
Now the application you selected opens and you can continue the
scanning from that application’s TWAIN interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
CREATING AN HTML WEB PAGE FROM YOUR SCANNED DOCUMENTS
If you scan a document, whether a single page or multiple pages, you
can have the pages converted directly to html formatted pages for
posting directly to your web site. Those pages are then viewable by
visitors to your web site without the need for any internet plug-ins or
other special processing. This is, essentially, from your scanner to a web-
ready format in one automatic step.
To scan and create an HTML web page:
1. Open the OneTouch Properties window.
2. Using the arrows, choose Button 6, or any other button that has
Microsoft Explorer as one of its Destination Applications.
3. Select Microsoft Explorer as the Destination Application.
4. Choose HTML as the Page Format.
Choose HTML
5. Choose a Scan Configuration.
6. Click Apply or OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
87
7. Now on the OneTouch Button Panel, click Button 6 (or if you used
another button, click it).
When scanning is finished, the document is first converted to
editable text using the OCR process, and then is converted into an
HTML format. Microsoft Internet Explorer then opens showing
your converted page.
8. Choose Save As from the Internet Explorer File menu, give the
page a name, and save it in the location you use for your web page
files.
You may also want to write down the address shown in the Address
bar to make sure you’ll know where to find your new HTML page
later on.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
If you want to see what the page will look like on your web site,
click on it.
9. You can now use Microsoft Internet Explorer or other application
to post the document to your web page as you would any other
HTML page.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
89
TRANSFERRING SCANNED DOCUMENTS TO STORAGE
With the Transfer to Storage scanning process, you can scan documents
and save them in a folder in one step. The process is ideal for archiving
documents without having to manually save or process them in any
other way. If you choose a text format for the file format, the documents
are also automatically converted by the OCR process into editable text
and numbers before being stored.
Note: OneTouch Button 7 is preset as your Archive button. But you
can also set up any other button to scan to Archive the text.
1. To scan using the buttons on the scanner, press the Destination
Selector until the LED is at 7, then press the Simplex or Duplex
button.
2. To scan from the OneTouch Button Panel, click the OneTouch
icon in the Windows system Tray, click the arrows to see Button 7,
then click Button 7.
Click the arrows until
Button 7 is on the panel,
then click Button 7.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Your scanned pages are stored in the location that you specified on
the OneTouch 4.0 Link Properties window.
Your scanned documents
will be stored at this location.
To Use OCR Before Transferring to Storage
If the documents you want to transfer to storage are text documents or
spreadsheets, you can have them converted by the OCR process prior to
being stored.
1. Open the OneTouch Properties window.
2. Using the arrows, choose Button 7, or any other button if it is set
up with Transfer to Storage as one of its Destination Applications.
3. Choose a text format as the file format.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
91
4. Right-click on the text format icon and choose the file format for
the scanned documents.
5. Choose a Scan Configuration.
6. Click Apply or OK.
7. Now start scanning using Button 7 (or other button you set up for
archiving).
When scanning is finished, the documents are saved in the text file
format and in the location you specified.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
CHECKING THE HARDWARE AND SETTING THE LAMP POWER SAVE MODE
1. Right-click on the OneTouch icon and choose Show Hardware
from the pop-up menu.
You can also click the scanner icon at the top of the OneTouch
Button Panel.
The Hardware icon
If the Hardware View of the panel is open you can also right-click
on the XP 470 icon.
The Hardware Properties dialog box appears and shows
information about your Visioneer Strobe XP 470 scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
93
2. Click the Properties button.
Your scanner has a built-in power saving feature that is set to power
down after 15 minutes of idle time. You can change the time before
the scanner powers down, from 10 minutes to a maximum of 10
hours.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
3. Click the arrows for the Lamp timeout setting and choose a time
setting.
To turn the lamp on and off manually without turning off power to
the scanner, click the Lamp On or Lamp Off buttons.
To return the scanner to its factory settings, click Reset Device.
4. Click OK to save the changes and close the dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE ONETOUCH BUTTONS
95
Scanning from PaperPort
Instead of using the scanner buttons or the OneTouch Button Panel to
scan, you can scan from PaperPort.
You scan from PaperPort using the Basic Interface, Advanced Interface,
or the Windows Image Acquisition (WIA). See “Scanning with the
Windows Image Acquisition” on page 119 to scan using the Windows
Image Acquisition.
The Basic Interface and Advanced Interface use the TWAIN standard
for scanning. TWAIN is a widely recognized method that computers
use to receive images from scanners, digital cameras, and other digital
devices. Many other graphics and imaging applications also comply
with the TWAIN standard, so you can use your scanner with those
applications too.
Note: When scanning, the Basic Interface or Advanced Interface
opens right away (without opening PaperPort first) if the button you’re
using to scan is set to Configure Before Scan, and the selected option
is TWAIN.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
SCANNING FROM THE BASIC INTERFACE OR ADVANCED
INTERFACE
The instructions in this section are for scanning from the PaperPort
Desktop using the Basic Interface or Advanced Interface.
To scan an item from PaperPort:
1. Start ScanSoft PaperPort 9.0.
The PaperPort Desktop opens.
Scan icon
Folders Pane
2. Click the Scan icon on the PaperPort command bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE
97
The Folders pane (which shows folders for organizing your scanned
images) is replaced by the Scan pane.
Scan pane
Choose Visioneer Strobe XP 470 from here
1. From the Scanner list, choose Visioneer Strobe XP 470.
2. In the “Scan what?” section, choose to scan a Document or
Photograph.
If you want to change the format of the scanned item’s file name or
file type before you start scanning, click Settings. The default file
type for documents is .pdf and the default for photographs is .jpg.
3. Use the Single page items check box as follows:
■ When the check box is selected, all pages in the automatic
document feeder are scanned and placed as single pages on the
PaperPort desktop.
■ When the check box is not selected, all pages in the automatic
document feeder are scanned, but not placed on the PaperPort
desktop until you indicate the scanning job is finished by
clicking Done on the PaperPort-Scan window.
4. Click the Scan button on the Scan pane.
The Basic Interface opens and you’re ready to start scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
5. If you haven’t put the document into the scanner’s paper guide, do
it now.
Note: If you used the Advanced Interface the last time you scanned
from PaperPort, it will open instead.
Note: You can also open the Basic Interface or Advanced Interface
from the PaperPort ScanDirect application.
SELECTING SETTINGS
Clicking the Settings option on the PaperPort Scan panel displays the
Settings dialog box where you can change the naming of scanned items
and their file type.
To select Settings:
1. Click Settings on the Scan Pane before clicking the Scan button.
The Settings dialog box appears.
Click the Output tab to
see setting options.
When the Scan tab is selected, as shown above, the dialog box
shows information about the scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE
99
2. Click the Output tab.
The Settings dialog box now has options for setting the name of
scanned items, and their file type.
■ Enter name or select date format—You have two basic options
for the naming of scanned items: a text name, or a date.
To give scanned items a text name, type the name in the box.
For example, to name your scanned items Photograph, type the
word Photograph in the box. From then on, each scanned item is
named Photograph and is numbered sequentially, Photograph
(1), Photograph (2), and so on.
To name each item by the date when it is scanned, click the
menu arrow and choose one of the date formats, such as March
4, 2001. From then on each scanned item is named on the date
when it is scanned, and numbered sequentially, May 23, 2003
(1), May 23, 2003 (2), and so on.
■ File type—Click the menu arrow and choose the file type for
your scanned items, such as .jpg, .pdf, or .bmp. Your scanned
items are then converted to that file type and placed on the
PaperPort Desktop. The small icon on the bottom right corner
of the PaperPort thumbnails indicates the file type you selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
This icon indicates the
PDF format.
If you select JPEG or PDF as the file type, you can also click the
Options button to select image quality options.
These options offer choices for the balance between image quality
and file size. The higher the quality of the image, the larger the file
size, and the lower the quality the smaller the size. For example, for
images on your web site, you may accept less image quality and a
smaller file size so images load faster on your web pages. The Good
Quality and Lower Quality options produce reasonably good
images. To select your own option, click Custom and drag the
slider. Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 101
SCANNING FROM THE BASIC INTERFACE
The Basic Interface can scan a preview of the image so you can adjust its
appearance before scanning the final image. After adjusting the
appearance, you click the Scan button on the Basic Interface (not on the
scanner) to scan the item.
Click the Advanced Interface button if
you would rather scan with the Advanced
Interface.
1. From the Scan Type menu, choose the option to scan Simplex
(one-sided) or Duplex (two-sided).
2. Choose the color, grayscale, or black and white option from the
Picture Type menu.
Note: If you want to preview the document before scanning, make
sure only one page is loaded into the scanner.
3. Click the Preview button.
The scanner scans the item and displays a preview image. You can
now use the options on the Basic Interface to adjust the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Note: If you want to preview for a stack of pages, use one of the pages
as a test page and load it into the scanner. Click the Preview button
and adjust the scanner settings. Then replace the page on the stack at
its original position and load the stack into the scanner. Then just
click the Scan button.
4. Adjust the brightness, contrast, and resolution until the picture is
what you want.
You can also change the picture type again, for example, from color
to grayscale.
5. To preview the item with the new settings, place the document into
the ADF again and click the Preview button again on the Basic
Interface.
6. When you are satisfied with the preview image, place the document
into the ADF again and click Scan.
7. When you’re finished scanning items, click Done to close the Basic
Interface.
desktop, the item appears as a thumbnail on the desktop.
If the Single page items check box is not selected, thumbnails do
not appear until you indicate the scanning job is finished.
See “The Single Page Items Check Box” on page 104.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 103
8. On the PaperPort Scan message box, click Done.
When scanning is complete, thumbnail images appear on the
PaperPort Desktop
A thumbnail image of the The small icon represents
scanned item appears on the file format, in this case
the PaperPort desktop
the PaperPort format
ON THE PAPERPORT DESKTOP
■ Unless you changed it with the Settings option, the name of the
scanned image is the day, date, and number of scanned items that
day. For example, the second item scanned on a day is followed by a
(2), the third by a (3) and so on. To change a name, click it to select
its text and type a new name.
■ The thumbnail images of the stack of documents has “go to page
arrows” at their top right corners so you can click to flip through the
pages in the stack. The page counter underneath the thumbnail name
shows which page you’re viewing.
■ The small icon at the bottom right corner of the thumbnail image
indicates the file format of the scanned item.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
THE SINGLE PAGE ITEMS CHECK BOX
The Single page items check box (on the PaperPort Desktop Scan Pane)
provides the option to add additional items to a scanning job. If the
check box is selected, scanned items immediately appear on the
PaperPort desktop. If the check box is not selected (this is the default),
the following message box appears when you close the Basic Interface.
■ Click Scan More Pages to scan additional pages and add them to the
stack of items placed on the PaperPort desktop.
■ Click Scan Other Side to reload and scan the other side of previously
scanned pages. This option is only available once.
■ Click Done if you are finished scanning. The scanned items are
placed on the PaperPort desktop.
To learn more about the PaperPort software please see the ScanSoft
PaperPort User’s Guide on the Installation CD.
GETTING HELP WITH THE PAPERPORT SOFTWARE
The PaperPort software includes a complete set of help topics that
answer questions about each feature of the software. To open the Help
Topics window, press the F1 key or choose PaperPort Help from the
Help menu.
You can also refer also to the PaperPort Getting Started Guide and
PaperPort User’s Guide on the CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 105
SCANNING FROM THE ADVANCED INTERFACE
The Advanced Interface has more options for scanning.
1. Open the Basic Interface as described in the section “To scan an
item from PaperPort:” on page 96.
2. Click the Advanced Interface button on the Basic Interface.
The Advanced Interface appears.
Choose Simplex (one-sided)
or Duplex (two-sided) from
this menu.
Click an icon to select a
configuration—Color, Grey Scale,
or Black&White. Clicking the “+”
sign in front of Custom shows
Custom’s scan settings.
Click a setting in the list to
change it. The setting’s options
appear on the right side of the
Advanced Interface where you
can make changes if necessary.
Check the Scan Info to
make sure your computer
has sufficient space for the
image. Warning icons on
this box appear if your
computer does not have
enough space for the
scanned image’s file.
If you don’t need all the features
of the Advanced Interface, click
Basic Interface to return to it.
Click Preview to view the
image in the window.
When you are satisfied
with the scan settings,
click Scan.
Click Done to close the
Advanced Interface.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
1. From the menu at the top left panel, select whether you want to
scan a Simplex (one-sided) or Duplex (two-sided) document.
2. Click one of the icons to select a configuration.
For example, select Color Configurations and then select Custom
to scan a color item with the preset Custom scan settings.
The configuration settings appear as a list. Click the + (plus) sign to
see the full list. Click the - (minus) sign to collapse the list.
■ Black&White is for letters, memos, pen and ink drawings, and
other black and white material. This setting produces the
smallest file size for scanned items.
■ GrayScale scans the image using up to 256 true shades of gray.
Use this setting to scan black and white photographs and other
higher quality black and white images. You can also scan a color
photo with this setting to turn its colors into gray shades. The
file size is about one third the size of a color scan.
■ Color scans the image in full color. Use this setting to scan color
photographs and other color images. The file size is the largest of
the image type options.
3. Click the Preview button to preview the image before scanning.
4. Review the image to determine if adjustments are needed.
5. To adjust a setting, click the setting in the list on the left below the
selected configuration.
A panel opens on the right side of the Advanced Interface for the
selected setting. Select new options on that panel. See “Adjusting
the Image with the Advanced Interface” on page 108 for details on
changing scan settings.
6. (optional) To preview the image again, put the document back into
the scanner’s automatic document feeder, and click the Preview
button again. Readjust the settings if necessary.
7. When you’re satisfied with the image, load all the documents into
the paper guide and click the Scan button.
A window opens during scanning and shows the progress of the
scan.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 107
8. When you’re finished scanning items, click Done to close the
Advanced Interface.
When scanning is finished, a thumbnail of the scanned image
appears on the PaperPort desktop. If you’re scanning multiple
pages, they appear as PaperPort stacks. The default setting is to scan
multiple items and save them as stacks. That setting is controlled by
the Single Page Items check box.
To Cancel scanning while it’s in progress, click the Cancel button
on the progress window.
desktop, the item appears as a thumbnail on the desktop.
If the Single page items check box is not selected, thumbnails do
not appear until you indicate the scanning job is finished.
See “The Single Page Items Check Box” on page 104.
10. Use the PaperPort software to work with the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
ADJUSTING THE IMAGE WITH THE ADVANCED INTERFACE
You can adjust the scan settings on the Advanced Interface to produce
the best possible image for the documents you’re scanning.
To adjust a setting:
1. On the left side of the Advanced Interface, select a configuration,
for example, Color Configurations.
2. Click a setting in the list of settings, or click its corresponding
button on the right side of the Advanced Interface.
Resolution
Brightness/Contrast
Color (Gamma, Saturation,
and Hue)
Scan Size
Note: The list of scan settings for a configuration applies only to that
type of configuration. For example, the Black&White Configuration
does not have a setting for adjusting the Color Hue.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 109
The following figure shows an example of the Advanced Interface if
you click the Resolution setting in the list, or click the Resolution
button.
Click to close the
settings panel
Note: The information in the scan settings list and the options you
select on the various settings panels are interactive. As you change the
settings on the panel, the numbers in the list on the left also change.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
ADJUSTING THE RESOLUTION
Resolution determines the amount of detail you can see in the scanned
image. The resolution setting for a scan is in dots-per-inch (dpi). The
higher the resolution, the finer the details. However, higher dpi settings
also take longer to scan and produce larger files sizes. Usually the higher
resolution settings are used for precision work, such as photographs or
fine artwork.
The following figure shows the resolution options.
Note: The location of various buttons on the panels may be slightly
different on your Advanced Interface window. The appearance of the
window depends on your monitor’s screen resolution.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 111
To adjust the resolution:
1. To use one of the preset resolutions for typical scanned items, click
one of the options in the list.
For example, to set the resolution for scanning a business card,
select Business Card. That setting is preset to read small print on a
typical business card.
2. To set the resolution manually, drag the Resolution slider to the left
to decrease the resolution or to the right to increase it.
You can also type a number directly into the resolution setting box,
or click the up and down arrows to increase or decrease the setting.
The resolution settings on your Visioneer Strobe XP 470 scanner
range from 50 dpi to 600 dpi.
3. Click Reset to return the resolution to its original setting.
The resolution panel also includes an advanced setting for Moire
patterns. Moire patterns are wavy, rippled lines that sometimes appear
on the scanned images of photographs or illustrations, particularly
newspaper and magazine illustrations. To scan the image and limit or
eliminate moire patterns, select the Reduce Moire option. This option
is only available from 50 to 300 dpi.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
ADJUSTING THE BRIGHTNESS AND CONTRAST
Sometimes an item is scanned with the brightness and contrast set to be
too light or too dark. For example, a note written with a light pencil
may need to be scanned darker to improve legibility.
The following figure shows the brightness and contrast options.
Contrast is only available for Color and Gray Scale configurations.
To adjust the brightness and contrast:
1. Drag the Brightness slider to the left to make the item darker or to
the right to make the item lighter.
2. Drag the Contrast slider to the left to decrease the contrast or to
the right to increase the contrast.
You can also type a number directly into the brightness or contrast
setting boxes, or click the up and down arrows next to the box to
increase or decrease the setting.
3. Click Reset to return the settings to their original numbers
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 113
ADJUSTING GAMMA, SATURATION, AND COLOR HUE
If you’re using the Color Configuration to scan, you can adjust a group
of color settings. Gamma controls the brightness of the color midtones.
Saturation is the strength or purity of a color and hue is the color your
eyes see as reflected from the image.
The following figure shows the color options.
To adjust the color settings:
1. Drag the Gamma, Saturation, and Color Hue sliders to the left to
decrease the settings or to the right to increase the settings.
You can also type a number directly into the setting boxes, or click
the up and down arrows next to the boxes.
2. Click Reset to return the settings to their original numbers.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
ADJUSTING INPUT SIZE
You can scan documents up to 8.5" x 14", but you can select other scan
sizes, or adjust the input size to scan only specific sections of an image.
For example, if you’re scanning a photograph and want to focus on one
section, adjusting the input size removes the rest of the photograph
from the final scanned image.
The following figure shows the input size options.
To set the image size:
1. Select the image size from the menu.
The dotted outline shows the selected area in the image.
The following figure shows an example of a manually selected area.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 115
This is the image that appears
on the PaperPort desktop
when scanning is finished.
The Scan Info box shows the
size and position of the area.
The selected scan area.
You can now move or resize the outline to select the specific area
you want to scan.
2. To move the dotted outline, put the pointer in the selected area and
drag the mouse.
3. To resize the selected area, put the pointer on a dotted line and drag
it.
Note that as you drag a dotted line, the menu selection for the
image size changes to Custom to indicate you are customizing the
size.
The Scan Info box on the lower left portion of the Advanced
Interface shows the information for the new area.
4. If the dotted line is not exactly where you want it, put the pointer
on the line and drag the mouse.
5. If you want to remove the selected area and start over, click Remove
on the Scan Info box.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Note: Clicking Remove causes the entire 8.5" x 14" area to be
selected.
THE RULER UNITS
The ruler around the edges of the image help you precisely position a
custom sized image. You can change the ruler units to suit the type of
measurements you want.
To set the ruler units:
1. Click the Ruler Units button.
The ruler units across the top and down the side of the window
cycle through centimeters, inches, and pixels.
THE SCAN INFO BOX
The following figure shows the information on the Scan Info box:
Physical size of the
image to scan
Location of the top
left corner of the
image in the Pre-
view window
Size of the file of the
scanned image
Current location of
the pointer as you
drag it on the Pre-
view window
The space on your
computer’s hard drive
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 117
CREATING A NEW ADVANCED INTERFACE PROFILE
You cannot change the settings of the preset profiles in the Advanced
Interface. However you can create new profiles and save them for future
use.
To create a new profile:
1. On the Advanced Interface, select one of the preset profiles, for
example, Black&White Configurations/Custom.
2. Adjust the settings as required and then click the Save As button.
The Save Profile dialog box opens.
3. Type a name for the new profile and click OK. The name must be
at least two characters long.
Your new profile is added to the configuration list.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click Save.
3. If you want to delete the selected profile, click Delete.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
The Device configuration window shows the information about
your scanner.
See the section “Checking the Hardware and Setting the Lamp
Power Save Mode” on page 92 for more information about the
device settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING WITH THE WINDOWS IMAGE ACQUISITION 119
SCANNING WITH THE WINDOWS IMAGE ACQUISITION
Microsoft Windows includes its own set of options for acquiring images
from scanners, digital cameras, and other digital devices. Windows
Image Acquisition (WIA) options as described below.
Note: Scanning with the Windows Image Acquisition (WIA) is only
available if your computer is running Windows XP or Me.
To scan an item:
1. On the Windows taskbar, click Start, point to All Programs, point
to ScanSoft PaperPort 9.0, and then click PaperPort.
The PaperPort desktop opens.
2. Click the Scan icon on the PaperPort command bar.
The Folders pane is replaced by the Scan pane.
Scan pane
1. From the Scanner list, select WIA-Visioneer Strobe XP 470.
Download from Www.Somanuals.com. All Manuals Search And Download.
120
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
2. In the “Scan what?” section, choose to scan a Document or
Photograph.
3. Click Settings to view and change the format for the scanned item’s
file name and the file type. The default file type for documents is
.pdf and for photographs is .jpg.
4. Use the Single page items check box as follows:
■ When the check box is selected, all pages in the document feeder
are scanned and placed as single pages on the PaperPort desktop.
■ When the check box is not selected, all pages in the document
feeder are scanned, but not placed on the PaperPort desktop
until you indicate the scanning job is finished.
5. Click the Scan button in the Scan pane.
The scan window opens. Use this window to select scanning
options and start the scanner.
6. Click the button most appropriate for the item you’re scanning.
7. Select a paper size from the Page Size list.
8. Click Preview to preview the image before scanning.
The image is displayed on the right side of the window.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING WITH THE WINDOWS IMAGE ACQUISITION 121
Note: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace that page on the stack so it is
scanned with the rest of the pages.
9. Adjust settings of the previewed image as desired:
■ Change the button selection for the type of image.
■ Adjust the custom settings; refer to the next section, “Fine
Tuning Your Scans”.
■ Change the size of the scanned image. To do this, click and hold
the mouse pointer over one of the four sizing-boxes on the
corners of the previewed image. Then drag the box to increase or
decrease the size of the image.
10. Preview the image again. When you are satisfied with the image,
click the Scan button.
If the Single page items check box is selected on the Scan pane, the
scanned item appears as a thumbnail on the PaperPort desktop.
11. If the Single page items check box is not selected, thumbnails do
not appear until you indicate the scanning job is finished.
12. On the PaperPort - Scan message box, click Done.
Note: Refer to “The Single Page Items Check Box” on page 104.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
FINE TUNING YOUR SCANS
You can select new settings before you scan an item to fine tune exactly
how you want to scan a particular item.
To select the scanner settings before you scan:
1. On the scan window, click Adjust the quality of the scanned
picture.
The Advanced Properties dialog box opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING WITH THE WINDOWS IMAGE ACQUISITION 123
2. Select the options for scanning.
Brightness and Contrast—Drag the sliders to the right or left to
adjust the brightness and contrast of the scanned image. The
Contrast setting does not apply to the setting Black and White
picture or text.
Resolution (DPI)—Click the menu arrow and choose the dots per
inch (dpi) of the resolution. The maximum resolution is 600 dpi;
the minimum is 50 dpi. The higher the dpi setting, the sharper and
clearer the scanned image. However, higher dpi settings take longer
to scan and produce larger files for the scanned images.
Picture type—Click the menu arrow and choose the most
appropriate type for the item you’re scanning.
3. Click OK.
The Custom Settings button is now set to scan with the options
you selected.
If you want to reset the settings and start over, click Reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Maintenance
This chapter contains information on recalibrating, troubleshooting,
cleaning, uninstalling, and scanner specifications.
This section contains information on maintenance, troubleshooting,
uninstalling, scanner specifications, and spare parts.
CLEANING THE AUTOMATIC DOCUMENT FEEDER
You may need to clean the ADF feed mechanism if your documents do
not feed easily into the ADF, or several feed in at the same time.
To clean the ADF:
1. Wet a cotton swab with some isopropyl alcohol (rubbing alcohol).
2. Press the ADF cover release on the top left of the scanner body to
open the automatic document feeder cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean its
entire surface.
4. Wipe the pad from top to bottom. Be careful not to snag the swab
on the springs on either side of the pad.
5. Close the cover when you’re finished.
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEARING PAPER JAMS 125
CLEARING PAPER JAMS
If your scanner stops scanning due to a paper jam in the Automatic
Document Feeder, a warning dialog box opens after a few moments.
To clear a paper jam:
1. Press the ADF cover release on the top-left of the scanner body to
open the automatic document feeder cover.
2. Remove the jammed paper and close the cover.
To reduce the number of paper jams, smooth and straighten the paper
before scanning and adjust the guides to the paper size.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
The ADF pad spring may wear out and is designed to be a user-
replaceable part. Problems with documents feeding into the ADF is an
indication that the pad spring may be wearing out.
See the “Visioneer Strobe XP 470 Scanner Parts List” on page 135 for
ordering information.
To replace the ADF Pad assembly:
1. Press the ADF cover release on the top left of the scanner body to
open the automatic document feeder cover.
2. Squeeze the plastic clamps that hold the pad assembly in place and
lift the pad up and out
3. Reverse the procedure to replace the new pad into its slots.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 127
TROUBLESHOOTING
In addition to the troubleshooting information contained in this
section, please see the Readme file on your installation CD. The
Readme file contains additional information that may help you
diagnose problems with the scanner.
If you try the troubleshooting procedures described in this section and
in the Readme file, and the scanner still has problems, you may have a
malfunctioning scanner. Refer to the technical support card that you
received with your scanner. Also visit our web site at www.visioneer.com
for additional technical information.
Problem: The scanner won’t scan. What’s wrong?
Check for one of these possible problems:
■ Are the cables loose or not plugged in securely? Inspect the cable
connections. Make sure the cables are plugged in securely.
■ Is the scanner’s status light on? Turn on the scanner’s power. If the
status light doesn’t come on, plug the power supply into another
electrical outlet.
■ Did you restart the computer after installing the software? If you
didn’t restart the computer, it may not have loaded all of the software
files. Try restarting your computer.
■ Did you plug the scanner into a USB hub? If you’re using a USB
hub to connect the scanner, the hub must have its own power supply.
If the hub does not have its own power supply, plug the scanner into
a USB port on the computer.
■ Did you select another scanning source in the PaperPort Scan
Pane? If you use multiple devices with your computer, you may have
selected another source for images. Start the PaperPort software and
click the Scan icon, and then make sure Visioneer Strobe XP 470 is
selected as the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
128
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Problem: During installation I got the error message: PaperPort
Installation is not complete. What do I do?
The installation procedure was not successful. You need to reinstall the
PaperPort software.
Problem: With AutoCrop to Original selected, sometimes I get
blank pages, or pages with lines. What’s wrong?
The pages were probably scanned in crookedly, or skewed. To use
AutoCrop to Original, the pages must be scanned in straight. Adjust the
paper guides on the scanner so pages feed in straight.
Problem: I got the error message: PaperPort cannot allocate enough
memory to perform internal critical operations. What do I do?
Close any other active applications so that additional memory is
available. If you click Continue, PaperPort moves the file to the
PaperPort data directory and renames the file with the prefix “bad”.
This allows you to recover the file later.
To recover the file, you can import it into PaperPort by using the Import
command in the File menu.
Problem: How do I uninstall PaperPort?
See the section “Uninstalling Your Scanner” on page 131. Uninstalling
does not delete your scanned items, and they remain in the PaperPort
Data folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 129
STATUS LIGHT TROUBLESHOOTING CODES
A green status light indicates the normal state of the scanner.
NORMAL OPERATION
■ Blinking green: indicates the scanner is waking up from power
saving and preparing to scan.
■ Steady green: indicates the scanner is ready to scan.
ERROR CODES
If your scanner experiences hardware problems, the status light will
blink red, and the LED flashes an “E” and the error code number.
The LED blinks back and forth
between “E” and the error code
number (such as 6).
The red light flashes the number
of times as the error code (6 in
this example).
The table below describes the error codes.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Error
Code
Problem Description
Solution
0
Scanner is not connected to the A cable may be loose. Check that the scanner’s cables are
computer. (The LED does not
flash “E” and the status light
remains green.)
correctly attached to the computer. If the scanner still does
not connect, re-boot the computer.
1
2
The scanning hardware in the
body of the scanner has
malfunctioned.
Re-boot your computer. If the problem persists, contact
Visioneer Technical Support.
The scanning hardware in the
Re-boot your computer. If the problem persists, contact
ADF portion of the scanner has Visioneer Technical Support.
malfunctioned.
3
4
5
The main board in the scanner
has malfunctioned.
Re-boot your computer. If the problem persists, contact
Visioneer Technical Support.
The CCD in the body of the
scanner has malfunctioned.
Re-boot your computer. If the problem persists, contact
Visioneer Technical Support.
The CCD in the ADF portion
of the scanner has
Visioneer Technical Support.
malfunctioned.
6
7
The scanner’s cover is open.
Close the scanner cover and make sure it attaches completely.
The lamp in the scanner body
has malfunctioned.
Make sure that the lamp has not been turned off manually.
See the steps on page 92 to turn the lamp on and off. Re-boot
your computer. If the problem persists, contact Visioneer
8
9
The lamp in the ADF portion of Make sure that the lamp has not been turned off manually.
the scanner has malfunctioned. See the steps on page 92 to turn the lamp on and off. Re-boot
your computer. If the problem persists, contact Visioneer
Technical Support.
Paper jam
See “Clearing Paper Jams” on page 125.
Download from Www.Somanuals.com. All Manuals Search And Download.
UNINSTALLING YOUR SCANNER 131
UNINSTALLING YOUR SCANNER
To uninstall the Visioneer Strobe XP 470 scanner, remove the
OneTouch software first, and then remove PaperPort, or other scanner
software.
STEP 1: UNINSTALLING THE SCANNER AND ONETOUCH SOFTWARE
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Double-click the Scanner/Cameras icon.
■ For Windows 2000, click the Devices tab, select the Visioneer
Strobe XP 470 scanner, and click the Remove button to remove
the scanner from the list. Click OK.
■ For Windows Me or XP, right-click the Visioneer Strobe XP
470 icon, and select Delete to delete the scanner from the list.
3. Unplug the USB cable from the scanner.
4. Click the Back button in the toolbar to go back to the Control
Panel.
5. Double-click the Add/Remove Programs icon.
■ Windows Me: The Add/Remove Programs Properties window
opens. Select the Install/Uninstall tab.
■ Windows 2000 or XP: The Add or Remove Programs window
opens. Make sure the Change or Remove option is selected.
6. From the list of programs, select OneTouch 4.0.
■ Windows Me: Click the Add/Remove button.
■ Windows 2000 or XP: Click the Change/Remove button.
7. On the OneTouch 4.0 InstallShield Wizard window, select Remove
and then click Next.
8. On the Confirm Uninstall window, click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
132
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
9. On the Maintenance Complete window, click Finish.
The OneTouch software is removed from your computer.
10. Close all open windows and restart your computer.
STEP 2: UNINSTALLING THE PAPERPORT SOFTWARE
To uninstall PaperPort 9.0 from Windows Me:
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Double-click the Add/Remove Programs icon.
3. On the Add/Remove Programs Properties window, select the
Install/Uninstall tab.
4. Select PaperPort 9.0 and click Remove.
5. On the Welcome window, click Next.
6. On the Program Maintenance window, select the Remove option,
and then click Next.
7. On the Remove the Program window, select the Remove files
option, and then click Remove.
The PaperPort software is removed.
8. On the Uninstall Completed window, click Finish.
9. Close all open windows and restart your computer.
To uninstall PaperPort 9.0 from Windows 2000 or XP:
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. Click the Add or Remove Programs icon.
The Add or Remove Programs window opens.
3. Select PaperPort 9.0 and click Remove.
Download from Www.Somanuals.com. All Manuals Search And Download.
UNINSTALLING YOUR SCANNER 133
4. A message window opens, asking if you are sure you want to remove
PaperPort 9.0 from your computer. Click Yes.
The PaperPort software is removed.
5. Close all open windows and restart your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
VISIONEER STROBE XP 470 SCANNER SPECIFICATIONS
Optical resolution
Bit depth
600 x 1200 dpi
48-bit color (internal)
Maximum item size
Minimum item size
Scan method
8.5” x 14”
3.5” x 2” (automatic document feeder)
Automatic document feeder (ADF)
ADF specifications
Scanning Speed
Up to 33 pages per minute.
Up to 66 images per minute @ 200 dpi B&W
50 sheets
Capacity
Paper Thickness
Light source
Interface
16 - 28 lbs. (0.002” - 0.006”)
Cold cathode fluorescent lamp
USB 2.0 High Speed
Scanner dimensions
Height
12.5 inches (31.75 cm)
Width
13.25 inches (33.66 cm)
Length
17 inches (43.18 cm)
Weight
8.6 pounds (3.91 kg)
Operating temperature
Relative humidity
Power adaptor
Power consumption
50°–104° F (5°–35° C without condensation)
40%–70% (@35° C without condensation)
DC Jack, 24V/2.0A (60W), 100-240V (with EMI core)
< = 30 Watts
Safety and agency certifications UL, C-UL, FCC Class B, CE
Download from Www.Somanuals.com. All Manuals Search And Download.
VISIONEER STROBE XP 470 SCANNER PARTS LIST 135
VISIONEER STROBE XP 470 SCANNER PARTS LIST
Please use the following part names and numbers when ordering
replacements for your scanner.
Part Name
Part Number
Paper Guide
57-0104-000
Output Tray
57-0105-000
ADF Pad
57-0103-000
35-0071-000
AC Power Cord
Power Supply
Buttons Label
37-0067-000
09-0631-000
Download from Www.Somanuals.com. All Manuals Search And Download.
136
VISIONEER STROBE XP 470 SCANNER USER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX 137
csv file format 53
I N D E X
A
ADF cleaning 124
adjust settings 108
new profile 117
OCR 71
text file format 51
Disc 1 8
Document Format 35
Document Management 56
documentation 4
dpi 110, 123
profile 117
Advanced Properties 122
advanced settings 63
AOL Version 9 47
Archive button 89
aspect ratio 65
Autocrop to Original 61
AutoRotate image 65
Duplex 62
B
Basic Interface 101
bit depth 134
eMail 56
Black&White 59, 106
blurred image 111
BMP 49
Brightness 60, 112, 123
Burn to CD 45, 82
button options 55
F
file format 52
file storage location 90
Font Matching 74
C
CD-ROM drive 4
Color 60, 106
color
hue 113
options 113
gamma 13, 63, 113
grayed out options 36
GrayScale 60, 106
Color Document 39
color filter 63
color space 13
Comma Delimited 53
components 2
computer specifications 4
Configure Before Scan 68
H
help 104
htm file format 53
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
138
HTML Document 53
HTML page 88
hue 63
columns 77
storage 90
tables 77
OCR button 70
I
OCR Dictionary 73
image
blur 111
preview 106
Image Editors 56
image file 49
image file format 49
image size 114
improvements and settings 61
input size 114
installation 5
invert image 62
inverted text 76
ISIS 69
names 33, 54
OCR 71
options 55, 58
J
JPG 49
HTML 86
JPG file size 50
page settings 61
page size 61
paper guide 6
paper jam 125, 130
PaperPort 95
L
lamp malfunction 130
Lamp timeout setting 94
Languages in Document 73
LED number 25, 62
desktop 96
help topics 104
Scan pane 97
M
thumbnail 103
pause scanning 27
PDF 50, 56
PDF file size 50
Picture type 123
power saving 93
Preview button 101, 120
preview image 106
Moire Patterns 62, 111
monitor 4
N
Normal PDF 53, 79
nPDF 39, 50, 53, 59, 79
O
R
OCR 51
Reject Character 74
Download from Www.Somanuals.com. All Manuals Search And Download.
Rich Text Format 52
rtf file format 52
troubleshooting codes 129
Straighten Image 61
ruler units 116
S
saturation 63, 113
scan
file name 103
from PaperPort 95
multiple pages 103
Scan Configuration 35
scan file name 99
Scan Info box 116
scanner
template 77
text color 76
Text Editors 56
text file format 51
Text Formats 51
TIFF 49
components 2
connecting 16
troubleshooting 127
uninstall 131
Searchable PDF 53, 79
Settings on the Scan Pane 98
setup 5
Show Hardware 92
Simple Text 52
TWAIN 69, 85
uninstall 131
VirtualReScan 69
single page items check box 97, 104, 121
size 61
watermark, remove 63
WIA 69, 119
Windows Image Acquisition 119
Word Document 52
skewed page 61
skip blank originals 62
sPDF 39, 50, 53, 59, 79
spreadsheet 77
X
xls file format 53
spreadsheets
OCR 71
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
140
Download from Www.Somanuals.com. All Manuals Search And Download.
|