T8600 HRC TREADMILL
OWNER’S MANUAL SUPPLEMENT
Powerful 2.5 HP Continuous
Spacious
Duty/Commercial-Grade Motor
- Spacious 20” x 60” running area
Pre-Waxed Slik-DeckTM
- 1” Thick Commercial-Grade phenoliccoated
deck, double sided.
- U.S. made industrial grade motor, with
full sealed bearing construction
- Easy access to motor brushes
- Open frame design for superior
ventilation
Siegling U.S. Cool-WeaveTM Belt
Design
- Internal Fan
- Cool-WeaveTM Design helps to disperse heat
over a greater surface area.
Convenience
- Water bottle/walkman holder.
Emergency Stop
- Your treadmill is designed with a Red
Emergency Stop Button that will cut power to
the treadmill if pressed down.
DCI Commercial-Grade PWM
Motor Controller
- Internal Fan
Elevation
- 12% incline.
Speed
- Starting speed of .5 mph and a maxi
mum speed of 12 mph.
Programming
The T8600HRC has built in heart rate control along with 6 programs from intervals to weight loss, each of the programs has nine differ-
ent levels. Use either the UP or DOWN arrows to choose the Heart Rate Control program. Press SELECT. The function light “HR”
will be flashing and “H 80” will show in the number screen. You can choose a target heart rate from 80 to 190 in 5 beat increments by
pressing the UP or DOWN arrows. Once your selected target level is showing in the number screen, press SELECT. A set time of
“34:00” will be flashing in the number screen. You may choose a time between 15 minutes and 99 minutes by pressing the UP or
DOWN arrows. When the time you choose is showing in the number screen, press Select. When you are ready to begin press START. *
For instructions on calculating your target heart rate refer to page 34 of the Treadmill Owner’s Manual. All other programming
instructions can be found on page 14 of the Treadmill Owner’s Manual.
* Please note there is a 5 minute warm-up period before program will make elevation Changes
Download from Www.Somanuals.com. All Manuals Search And Download.
|