ViewSonic Projector PJD6220 User Manual

®
ViewSonic  
- User Guide  
PJD6220/PJD6230/PJD6240  
DLP Projector  
- Guide de l’utilisateur  
- Bedienungsanleitung  
- Guía del usuario  
- Guida dell’utente  
- Guia do usuário  
- Användarhandbok  
- Käyttöopas  
- Руководство пользователя  
- 使用手冊 (繁體)  
IMPORTANT: Please read this User Guide to obtain important information on  
installing and using your product in a safe manner, as well as registering your  
product for future service. Warranty information contained in this User Guide will  
describe your limited coverage from ViewSonic Corporation, which is also found  
using the Regional selection box in the upper right corner of our website.  
- 使用手冊 (簡體)  
“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”  
Model No. : VS11949  
VS11986  
VS11990  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1.  
2.  
3.  
4.  
5.  
6.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this unit near water.  
Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for  
further instructions.  
7.  
8.  
9.  
Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s  
instructions.  
Do not install near any heat sources such as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and a  
third grounding prong. The wide blade and the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience  
receptacles and the point where they exit from the unit. Be sure that the power outlet is  
located near the unit so that it is easily accessible.  
11. Only use attachments/accessories specified by the manufacturer.  
12.  
Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the unit. When a cart is used, use caution when  
moving the cart/unit combination to avoid injury from tipping over.  
13. Unplug this unit when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the unit has  
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is  
spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the  
unit does not operate normally or has been dropped.  
ViewSonic  
ii  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with Directive 2002/95/EC of  
the European Parliament and the Council on restriction of the use of certain hazardous substances  
in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the  
maximum concentration values issued by the European Technical Adaptation Committee (TAC)  
as shown below:  
Proposed Maximum  
Substance  
Actual Concentration  
Concentration  
Lead (Pb)  
0.1%  
0.1%  
0.01%  
0.1%  
0.1%  
0.1%  
< 0.1%  
< 0.1%  
< 0.01%  
< 0.1%  
< 0.1%  
< 0.1%  
Mercury (Hg)  
Cadmium (Cd)  
6+  
Hexavalent Chromium (Cr  
)
Polybrominated biphenyls (PBB)  
Polybrominated diphenyl ethers (PBDE)  
Certain components of products as stated above are exempted under the Annex of the RoHS  
Directives as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not  
specifically mentioned in the Annex of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic  
ceramic parts (e.g. piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or  
more lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium  
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by  
weight.  
ViewSonic  
iii  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright Information  
Copyright© ViewSonic© Corporation, 2008. All rights reserved.  
Macintosh and Power Macintosh are registered trademarks of Apple Inc.  
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft  
Corporation in the United States and other countries.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks  
of ViewSonic Corporation.  
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC  
are trademarks of VESA.  
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or  
omissions contained herein; nor for incidental or consequential damages resulting from furnishing  
this material, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to  
change product specifications without notice. Information in this document may change without  
notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any  
purpose without prior written permission from ViewSonic Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes  
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you  
may mail or fax to ViewSonic.  
For Your Records  
PJD6220/PJD6230/PJD6240  
Product Name:  
ViewSonic DLP Projector  
VS11949/VS11986/VS11990  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
PJD6220_PJD6230_PJD6240_UG_ENG Rev. 1B 08-19-08  
__________________________________________  
__________________________________________  
The lamp in this product contains mercury.  
Please dispose of in accordance with local, state or federal laws.  
ViewSonic  
iv  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on the AC Power Cord  
AC Power Cord must meet the requirement of countries where you use this projector.  
Please confirm your AC plug type with the graphics below and ensure that the proper  
AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet,  
please contact your sales dealer. This projector is equipped with a grounding type AC  
line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose  
of this grounding type plug. We highly recommend using a video source device also  
equipped with a grounding type AC line plug to prevent signal interference due to  
voltage fluctuations.  
Ground  
ViewSonic  
v
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Introduction................................................................................... 1  
Projector Features........................................................................................................1  
Package Contents........................................................................................................2  
Projector Overview.......................................................................................................3  
Using the Product.......................................................................... 5  
Control Panel ...............................................................................................................5  
Connection Ports..........................................................................................................6  
Remote Control............................................................................................................7  
Installing the Batteries..................................................................................................8  
Remote Control Operation ...........................................................................................9  
Installation ................................................................................... 10  
Connecting the Projector............................................................................................10  
Powering On/Off the Projector ...................................................................................11  
Adjusting the Projector...............................................................................................12  
Menu Operation .......................................................................... 14  
Network Control.......................................................................... 19  
Maintenance................................................................................. 30  
Cleaning the Lens ......................................................................................................30  
Cleaning the Projector Housing .................................................................................30  
Replacing the Lamp ...................................................................................................31  
Specifications ............................................................................... 33  
Appendix ...................................................................................... 34  
LED Indicator Messages............................................................................................34  
RS-232 Command and Configuration........................................................................35  
Compatibility Modes...................................................................................................40  
Troubleshooting .........................................................................................................41  
ViewSonic  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Projector Features  
The projector integrates high-performance optical engine projection and a user - friendly  
design to deliver high reliability and ease of use.  
The projector offers the following features:  
®
Single chip 0.55" Texas Instruments DLP technology  
XGA (1024 x 768 pixels)  
Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling  
compression compatibility for VGA, SVGA, XGA and SXGA*  
®
Compatibility with Macintosh computers  
Compatibility with NTSC, PAL, SECAM and HDTV  
D-Sub 15-pin terminal for analog video connectivity  
User-friendly, multi-language on-screen display  
Advanced electronic keystone correction  
Network function for remote management  
Closed Captioning included  
* means compressed.  
ViewSonic  
1
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
When you unpack the projector, make sure you have all these components:  
Projector with Lens Cap  
AC Power Cord  
VGA Cable (D-SUB to D-SUB)  
Composite Video Cable  
S-Video Cable  
Remote  
Control (IR)  
AAA size  
batteries for  
remote control  
User’s Manual  
Quick Start Guide  
Projector  
Carrying Case  
VGA -  
Component  
Adapter  
Save the original shipping carton and packing material; they will comein handy  
if you ever to ship your unit. For maximum protection, repack your unit as it was  
originally packed at the factory.  
Accessories and components may vary by retailer and region.  
ViewSonic  
2
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Projector Overview  
Front View  
12  
11 10  
9
8
7
1
2
3
4
5
6
Lens cap  
AC power socket  
Speaker  
1
7
8
Elevator button  
2
Lens cap strap  
Control panel  
Zoom ring  
3
9
Projection lens  
4
10  
11  
12  
Front IR remote control sensor  
Ventilation holes  
Focus ring  
5
6
Lamp cover  
ViewSonic  
3
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear View  
2
1
3
4
Connection ports  
Kensington lock  
Rear IR remote control sensor  
Ventilation holes  
1
2
3
4
Bottom View  
1
2
3
Elevator foot  
1
Ceiling mount (M4 x L7.5mm)  
Tilt-adjustment foot  
2
3
This projector can be used with a ceiling mount for support. The ceiling mount is  
not included in the package.  
ViewSonic  
4
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Product  
Control Panel  
LED  
1
2
3
4
8
7
6
5
Lamp (Lamp LED indicator)  
1
Refer to “LED Indicator Messages”.  
Temp (Temperature LED indicator)  
Refer to “LED Indicator Messages”.  
2
Button Function  
Four directional buttons  
3
Use four directional buttons to select items or make adjustments to your selection.  
Enter  
4
Enter to sub-menu and confirm the menu selection. Activate in Color Setting, Lamp  
Counter Reset and Factory Default menu operations.  
Resync  
5
6
7
8
Resynchronize the projector to the input signal from a computer.  
Power  
Turn the projector on or off.  
Menu  
Display or exit the on-screen display menus.  
Source  
Manually select an input source.  
ViewSonic  
5
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection Ports  
1
2
3
4
5
6
7
8
9
10  
LAN  
1
2  
3  
4  
5  
6  
7  
For network control.  
Audio Out  
Connect to a speaker or other audio input equipment.  
Computer Out  
Connect to a computer display, etc.  
Audio In  
Connect an audio output from video equipment to this jack.  
Computer In  
Connect image input signal (analog RGB or component) to this jack.  
Computer In  
Connect image input signal (analog RGB or component) to this jack.  
RS-232  
When operating the projector via a computer, connect this to the controlling computer's  
RS-232C port.  
S-Video  
8  
9  
Connect S-Video output from video equipment to this jack.  
Video  
Connect composite video output from video equipment to this jack.  
SERVICE  
10  
This connector is for firmware update.  
ViewSonic  
6
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Power  
1
Turn the projector on or off.  
Four directional buttons  
2
-Use four directional buttons to  
select items or make adjustments  
to your selection.  
- The right button acts as Blank  
Screen function. Cut off the screen  
temporarily. Press again to cancel  
the Blank Screen function.  
1
2
3
11  
MENU  
3
Display or exit the on-screen display  
menus.  
10  
4
5
Laser  
4
Aim the remote at the viewing  
screen, press and hold this button  
to activate the laser pointer.  
Four directional buttons  
(Computer mode only)  
5
6
7
9
8
Act as computer keyboard (four  
directional buttons). This function  
is only available when the projector  
is connected to a computer via a  
USB cable.  
Left (Computer mode only)  
6
Act as mouse left button. This  
function is only available when the  
projector is connected to a computer  
via a USB cable.  
ViewMatch  
7
Switch in between high brightness  
performance or Accuracy color  
performance.  
Source  
8
Manually select an input source.  
Right (Computer mode only)  
9
Act as mouse right button. This  
function is only available when the  
r
projector is connected to a compute  
via a USB cable.  
Enter  
10  
Confirm the selection.  
Freeze  
11  
Press "Freeze" to pause the  
screen image.  
Press again to cancel the Freeze  
function.  
ViewSonic  
7
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Batteries  
1.  
2.  
3.  
Open the battery cover in the direction  
shown.  
Install batteries as indicated by the diagram  
Inside the compartment.  
Close the battery cover into position.  
Keep the batteries out of the reach of children. There is a danger of death by  
accidentally swallowing the batteries.  
Do not recharge the used batteries or expose the batteries to fire or water.  
Do not dispose of the used batteries along with household waste. Dispose of  
used batteries according to local regulations.  
Danger of explosion may happen if batteries are incorrectly replaced.  
Replace only with the same type recommended by the manufacturer.  
ViewSonic  
8
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Operation  
Point the remote control at the infrared remote sensor and press a button.  
Operating the projector from  
the front  
Operating the projector from  
the rear  
15  
10  
5m  
7m  
5m  
Do not point the laser pointer directly to the people's eyes (especiallyn small  
children). There is a danger of injuiry to the eyes.  
The remote control may not operate when there is sunlight or other strong light  
such as a fluorescent lamp shining on the remote sensor.  
Operate the remote control from a position where the remote sensor is visible.  
Do not drop the remote control or jolt it.  
Keep the remote control out of locations with excessively high temperature or  
humidity.  
Do not get water on the remote control or place wet objects on it.  
Do not disassemble the remote control.  
ViewSonic  
9
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Connecting the Projector  
VGA Cable (D-Sub to D-Sub)  
VGA (D-Sub) to HDTV (RCA) Cable  
S-Video Cable  
1
5
6
7
8
Audio Cable  
2
RS-232 Cable  
Composite Video Cable  
Internet Cable  
3
USB Cable  
4
Laptop type  
Desktop type  
2
1
1
3
4
8
1
2
5
5
6
7
When connecting cable, power cords of both a projector and external  
equipment should be disconnected from AC outlet.  
The figure above is a sample connection. This does not mean that all of  
these devices can or must be connected simultaneously.  
The cables that come with the projector may differ from the above  
illustration. The included cables are based on actual shipment delivery.  
ViewSonic  
10  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering On/Off the Projector  
Powering On the Projector:  
1.  
2.  
3.  
Remove the projector lens cap.  
Complete the AC power cord and peripheral signal cable(s) connections.  
Press  
button to turn on the projector.  
The projector takes a minute or so to warm up.  
Turn on your source (computer, notebook, DVD, etc.). The projector automatically  
detects your source.  
4.  
If you are connecting multiple sources to the projector simultaneously, press  
the Source button.  
Warning:  
Remove the lens cap first before powering on.  
Never look into the lens when the lamp is on. This can damage your eyes. It  
is especially important that children are not allowed to look into the lens.  
Powering Off the Projector:  
1.  
Press  
off? Press Power again" appear on the screen.  
Press button again to confirm.  
button to turn off the projector lamp. You will see a message "Power  
2.  
The cooling fans continue to operate for cooling cycle.  
When the Lamp LED begins flashing, the projector has entered stand-by mode.  
If you want to turn the projector back on, you must wait until the projector has  
completed the cooling cycle and has entered stand-by mode. Once in stand-  
by mode, simply press  
button to restart the projector.  
3.  
4.  
Disconnect the AC power cord from the electrical outlet and the projector.  
Do not turn on the projector immediately following a power off procedure.  
ViewSonic  
11  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Projector  
Adjusting the Projector Height  
Tilt-adjustment foot  
Elevator foot  
Elevator button  
The projector is equipped with an elevator foot to adjust the image height.  
To raise or lower the image:  
1.  
To raise or lower the image, press the elevator button and raise or lower the front  
of the projector. Release the button to lock the adjustment.  
2.  
To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.  
To avoid damaging the projector, make sure that the elevator foot and tilt-  
adjustment foot are fully retracted before placing the projector in its carrying  
case.  
Adjusting the Projector Zoom and Focus  
Zoom ring  
Focus ring  
1.  
2.  
Focus the image by rotating the focus ring. A still image is recommended for focusing.  
Adjust the image by sliding the zoom ring.  
ViewSonic  
12  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Projection Image Size  
Refer to the graphic and table below to determine the screen size and projection distance.  
249.80  
124.90  
74.94  
68.35  
227.83  
49.96  
45.57  
113.92  
30.08  
27.34  
1.2m  
2.0m  
(Min.)  
3.0m  
5.0m  
10.0m(Max.)  
Projection Distance  
(meters)  
Screen Size (for 4:3 aspect ratio diagonal length)  
Wide (inches)  
30.08  
Tele (inches)  
27.34  
1.2  
2
49.96  
45.57  
3
74.94  
68.35  
5
124.90  
249.80  
113.92  
227.83  
10  
Position the projector in a horizontal position; other positions can cause heat  
build-up and damage to the projector.  
Make sure the heat ventilation holes are not blocked.  
Do not use the projector in a smoky environment. Smoke residue may cause  
build-up on critical parts (i.e. DMD, lens assembly, etc.)  
ViewSonic  
13  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Operation  
The projector has multilingual on-screen display menus that allow you to make image  
adjustments and change a variety of settings.  
ViewSonic  
14  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to operate  
1.  
Press the Menu button on the control panel or the MENU button on the remote  
control to open the OSD menu.  
When OSD is displayed, use  
After selecting the desired main menu feature, press  
feature setting  
Adjust the settings with  
2.  
3.  
S
/
T
to select any feature in the main menu.  
to enter sub-menu for  
X
.
4.  
5.  
W
/
X.  
Press the Menu buttonon the control panel or the MENU button on the remote  
control, the screen will return to the main menu.  
6.  
To exit OSD, press the Menu button on the control panel or the MENU button on  
the remote control again. The OSD menu will close and the projector will  
automatically save the new settings.  
Picture (Computer / Video Mode)  
Brightness  
Brighten or darken the image.  
Contrast  
Set the difference between light and dark areas.  
Color Setting  
Adjust the color temperature. At higher temperature the screen looks colder; at lower  
temperature, the screen looks warmer. If you select “User”, “Red”, “Green” and “Blue”  
cab be adjusted.  
Keystone  
Correct the keystone distortion.  
Aspect Ratio  
Select how the picture fits on the screen:  
4:3  
:
The input source will be scaled to fit the projection screen.  
16:9 : The input source will be scaled to fit the width of the screen.  
Image  
There are many factory presets optimized for various types of images.  
PC  
:
:
:
:
For computer or notebook.  
For home theater.  
Movie  
sRGB  
User  
For PC standard color.  
Memorize user’s settings.  
Screen Type  
Select the projection screen type.  
White Intensity  
Increase the brightness of white areas.  
ViewSonic  
15  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gamma  
Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.  
Computer Image (Computer Mode)  
Frequency  
Adjust the timing of the projector relative to the computer.  
Tracking  
Adjust the phase of the projector relative to the computer.  
H Position (Horizontal Position)  
Adjust the image left or right within the projection area.  
V Position (Vertical Position)  
Adjust the image up or down within the projection area.  
Video Image (Video Mode)  
Color  
Adjust the intensity of colors.  
Sharpness  
Sharpen or soften the image.  
Tint  
Shift colors toward red or green.  
Sound (Computer / Video Mode)  
Volume  
Adjust the volume level.  
Mute  
Cut off the sound temporarily.  
Setting (Computer / Video Mode)  
Menu Position  
Choose the menu location on the display screen.  
Projection  
Adjust the picture to match the orientation of the projector: upright or upside-down, in  
front of or behind the screen. Invert or reverse the image accordingly.  
Signal Type  
Specify the source to the Computer In terminal that you wish to project.  
Auto  
: Automatically choose the most suitable chroma subsampling scheme.  
Recommended!!  
YPbPr : For component 480p,576p,720p,1080i signals.  
RGB : For RGB video format. No subsampling. All information is accurately  
transmitted.  
YCbCr : For component 480i,576i signals.  
ViewSonic  
16  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lamp Counter  
Display the lamp’s elapsed operating time (in hours).  
Lamp Counter Reset  
Reset the lamp counter to 0 hours.  
Power Saving  
If no operation is performed for a specific period of time, the power to the projector is  
automatically turned off.  
Auto Source  
Automatically scan the input source.  
ECO Mode  
Use this function to dim the projector lamp light output which will lower power  
consumption and increase lamp life.  
High Altitude  
Turning on High Altitude mode operates the fans at full speed continuously to allow for  
proper high altitude cooling of the projector.  
Filter Mode  
When an optional air filter is attached, be sure to turn on the “Filter Mode”; otherwise,  
the machine can overheat and shutdown automatically.  
OSD Timeout  
Duration OSD menu stays active (at idle state by second).  
Option (Computer / Video Mode)  
Blank Screen  
Blank the screen temporarily, and select the screen color when this function is active.  
Start-up Screen  
Select start-up screen when the projector is powered on or when no signal is input.  
"User" is the screen that you captured.  
Screen Capture  
Capture the current projection screen as a start-up screen.  
Password  
Set or change the password. When the password function is added, image projection  
requires an entry of the preset password at power-on.  
DCR (Dynamic Contrast Ratio)  
Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable  
DCR will resume to normal contrast performance. DCR will impact lamp life and  
system noise performance.  
Closed Caption (Video and S-Video sources only)  
Enable or Disable closed captions by selecting CC1 (closed caption 1, the most  
common channel), CC2 or OFF.  
ViewSonic  
17  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Control  
Select either RS232 or LAN for network control. If RS232 is selected, user will not able  
to control the projector via LAN network and vice versa.  
Network Config  
DHCP  
Enable: Assign an IP address to the projector from the DHCP server  
automatically.  
Disable: Assign an IP address manually.  
IP Address  
Select an IP address.  
Subnet Mask  
Select subnet mask number.  
Gateway  
Select the default gateway of the network connected to the projector.  
Language (Computer / Video Mode)  
Select the language used by the on-screen menu.  
Factory Default (Computer / Video Mode)  
Restore all menu settings to factory default settings.  
ViewSonic  
18  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Control  
This feature provides the ability to remotely control and manage the projector through the network.  
Note: 1024x768 viewing resolution is recommended.  
Preparation:  
1. Connect one end of the internet cable to the LAN connector on projector.  
2. Connect the other end of the internet cable to an available LAN connector on the RJ45 outlet.  
3. Make sure the PC/NB is also connected to the internet.  
4. Turn on the projector and computer.  
There are two ways to connect to the network control:  
A. Auto IP address setting (DHCP):  
1. Enable DHCP from the projector OSD, under Network Config.  
2. Please wait for the PC server to release IP address to the projector. DHCP icon will pop  
up on the bottom right corner, once the IP address is received by the projector. (It will  
take approx. 15 ~ 20 seconds).  
3. Enter “Given IP address (For example http://10.0.50.100/)” into the address bar of the  
web browser and press “Enter” key or click “Go” button.  
B. Manual IP address setting:  
1. From your computer, go to Start > Control Panel > Network Connection and right click to  
select Properties.  
ViewSonic  
19  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Select “Intel Protocol (TCP/IP)” and click “Properties”.  
3. Set your IP address on your computer, and click OK.  
Click “Use the following IP address”  
IP address: 10.0.50.105, (set the last number different to the projector IP address).  
Subnet mask: 255.255.0.0  
ViewSonic  
20  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Enter “http://10.0.50.100/” into the address bar of the web browser and press “Enter” key or  
click “Go” button.  
5. After the connection is completed, the control screen will be as below  
Authority on the network control of Administrator & User:  
Item  
Description  
Show current projector status and network  
configuration settings.  
Administrator  
User  
Status  
Date & Time Setting Date & Time setting by user.  
×
×
×
×
Control Panel  
Network  
Control the projector via network.  
Network configuration & Password setup.  
Show and setup Alert configurations.  
Show and setup Scheduling configurations.  
Alert Setting  
Schedule  
ViewSonic  
21  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Login  
Enter “http://10.0.50.100/” into the address bar of the web browser and press “Enter” key or  
click “Go” button.  
If the administrative and user password is disabled, it will directly go into the Status page.  
If the Administrative & User password is enabled  
Select your User Name and enter password to login.  
ViewSonic  
22  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Status Information:  
All screen images in this manual are shown when you login with the Administrator ID. The  
image will differ if you login with User ID.  
Item  
IP Address  
Description  
Show current IP address.  
Show group name.  
Show projector name.  
Group Name  
Projector Name  
System Status  
Input Source  
Lamp Hours  
Filter Hours  
Projector Status  
Date(y/m/d)  
Time  
Show if projector is Power On or Inactive *.  
Show current input source.  
Show lamp used hours on current projector.  
Show filter used hours on current projector.  
Show current projector status, either function normally or error found.  
Show date set on current projector.  
Show time set on current projector.  
* when system status shows “Inactive”, it could either mean the projector is “Power Off”, or  
projector’s network control is set to be RS232 (Please refer to Network Control, Page 18 to link  
with the project).  
ViewSonic  
23  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Panel  
Item  
Description  
Update date setting on the projector.  
Update time setting on the projector.  
Date Setting  
Time Setting  
Click “Enter” button to save the settings.  
Show projector name on the current projector.  
Projector Name  
Power  
Power On or Power Off the projector via network.  
Select input source.  
Input Source  
Picture  
Brightness  
Contrast  
Adjusts the brightness setting.  
Adjusts the contrast setting.  
Color Temperature  
Keystone  
Selects the color temperature setting.  
Adjusts the keystone setting.  
Picture Mode  
Aspect Ratio  
Freeze  
Selects the picture mode setting.  
Selects the aspect ratio setting.  
Enable or disable the freeze function.  
Computer Image  
Frequency  
Tracking  
Adjusts the frequency.  
Adjusts the tracking.  
H Position  
V Position  
Adjusts the horizontal position.  
Adjusts the vertical position.  
ViewSonic  
24  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Image  
Color  
Adjusts the color setting.  
Adjusts the tint setting.  
Tint  
Sharpness  
Audio  
Adjusts the sharpness setting.  
Volume  
Adjusts the volume setting.  
Mute  
Enable or disable the mute function.  
Setting  
Menu Position  
Projection  
Auto Source  
ECO mode  
High Altitude  
OSD Timeout  
Language  
Adjusts the menu position.  
Selects the projection setting.  
Enable or disable the auto source function.  
Enable or disable the ECO function.  
Enable or disable the high altitude function.  
Selects the OSD timeout setting.  
Selects preferred OSD language.  
Enable or Disable factory default.  
Factory Default  
Option  
ViewMatch  
White Intensity  
Gamma  
Enable or disable ViewMatch.  
Selects the white intensity setting.  
Selects the Gamma setting.  
Signal Type  
Filter Mode  
Power Saving  
Start-up Screen  
Closed Caption  
Blank screen  
Selects the signal type setting.  
Enable or disable filter mode.  
Selects the power saving setting.  
Selects the start-up screen setting.  
Selects the closed caption setting.  
Enable or disable blank function.  
■ If the adjustment did not display properly. Please “refresh” or “reload”  
the browser again.  
ViewSonic  
25  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network  
Item  
Description  
Network  
DHCP  
Assign an IP address to the projector from the DHCP server automatically.  
Assign an IP address manually.  
Manual  
IP Address  
Setup IP address when DHCP is disable.  
Subnet Mask  
Gateway  
Setup subnet mask when DHCP is disable.  
Setup gateway when DHCP is disable.  
DNS Server  
Group Name  
Projector Name  
Password  
Setup DNS server address when DHCP is disable.  
Create projector group. (Max length: 6 characters)  
Create projector naming of the current projector. (Max length: 16 characters)  
Administrator -Enable Enable administrative password function.  
Administrator -Disable Disable administrative password function.  
New Password  
Confirm Password  
User - Enable  
Setup administrative password. (Max length: 4 characters)  
Re-enter administrative password.  
Enable user password function.  
Disable user password function.  
Setup user password. (Max length: 4 characters)  
Re-enter user password.  
User - Disable  
New Password  
Confirm Password  
Click “Submit” button to save the settings.  
■ If password is lost, please contact local ViewSonic customer support.  
ViewSonic  
26  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alert Setting  
Description  
Item  
Email Setting  
To  
Setup the mail alert attendee. (Max length: 40 characters)  
Setup the backup mail alert attendee. (Max length: 40 characters)  
Setup the subject of the alert e-mail. (Max length: 30 characters)  
Setup the sender e-mail address. (Max length: 40 characters)  
Cc  
Subject  
From  
SMTP Setting  
To enter the SMTP server (Mail server) name of the company.  
For example: mail.viewsonic.com (Max length: 30 characters)  
Server  
User Name  
Password  
Enter user name of the sender’s e-mail account. (Max length: 20 characters)  
Enter password of the sender’s e-mail account. (Max length: 14 characters)  
Alert Condition  
Fan Lock  
The cooling fan is not operating.  
The projector internal is over heated.  
The lamp does not light up.  
Over Temperature  
Lamp Fail  
Lamp is approaching the end of its useful life in full power operation.  
Replacement is suggested.  
Lamp Time Alert  
Schedule Excution Error Schedule Excution Error.  
Click “Submit” button to save the settings, then click “Issue Test Mail” to send a test mail to  
check whether all settings and functions are correct.  
ViewSonic  
27  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Schedule  
The schedule function is divided into two scheduling categories, as shown below:  
Weekly Schedule: defines the date of each week will execute the command  
Click “Submit” button to create new schedule. To delete schedule, click “Cancel”.  
Specific Day: defines the month and day that will execute the command.  
Click “Submit” button to create new schedule. To delete schedule, click “Cancel”.  
ViewSonic  
28  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Logout:  
ViewSonic  
29  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
The projector needs proper maintenance. You should keep the lens clean as dust, dirt  
or spots will project on the screen and diminish image quality. If any other parts need  
replacing, contact your dealer or qualified service personnel. When cleaning any part  
of the projector, always switch off and unplug the projector first.  
Warning:  
Never open any of the covers on the projector. Dangerous electrical voltages inside  
the projector can cause severe injury. Do not attempt to service this product yourself.  
Refer all servicing to qualified service personnel.  
Cleaning the Lens  
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.  
Cleaning the Projector Housing  
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth  
damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.  
Turn off the projector and remove the AC power cord from the power outlet  
before beginning maintenance work.  
Make sure the lens is cool before cleaning.  
Do not use detergents or chemicals other than those noted above. Do not use  
benzene or thinners.  
Do not use chemical sprays.  
Use a soft cloth or lens paper only.  
ViewSonic  
30  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing the Lamp  
As the projector operates over time, the brightness of the projector lamp gradually  
decreases and the lamp becomes more susceptible to breakage. We recommend  
replacing the lamp if a warning message is displayed. Do not attempt to replace the  
lamp yourself. Contact the qualified service personnel for replacement.  
The lamp becomes high temperature after turning off the projector with the  
power button. If you touch the lamp, you may scald your finger. When you  
replace the lamp, wait for at least 45 minutes for the lamp to cool down.  
Do not touch the lamp glass at any time. The lamp may explode due to  
improper handling, including the touching of the lamp glass.  
Lamp lifetime may differ from lamp to lamp and according to the environment  
of use. There is no guarantee of the same lifetime for each lamp. Some lamps  
may fail or terminate their lifetime in a shorter period of time than other similar  
lamps.  
A lamp may explode as a result of vibration, shock or degradation as a result of  
hours of use as its lifetime draws to an end. Risk of explosion may differ  
according to the environment or conditions in which the projector and lamp are  
being used.  
Wear protective gloves and eyeglasses when fixing or detaching the lamp.  
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least  
for 5 minutes to turn off the projector after powering on.  
Do not operate the lamp in proximity to paper, cloth, or other combustible  
material nor cover it with such materials. Otherwise it could cause a fire.  
Do not operate the lamp in an atmosphere containing an inflammable  
substance, such as thinner. Otherwise it could cause a fire or explosion.  
Thoroughly ventilate the area or the room when operating the lamp in an  
oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches,  
nausea, dizziness, etc.  
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury  
inside the lamp will go out of the projector. Leave the area immediately if the  
lamp shatters while being operated and ventilate the area for at least 30  
minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be  
harmful to user’s health.  
ViewSonic  
31  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
2.  
3.  
4.  
5.  
Turn off the projector.  
If the projector is installed in a ceiling mount, remove it from the mount.  
Unplug the power cord.  
Loosen the screw in the side of the lamp cover and remove the cover.  
Remove the screws from the lamp module, raise the handle, and lift out the  
module.  
6.  
7.  
8.  
Insert the new lamp module into the projector and tighten the screws.  
Replace the lamp cover and tighten the screw.  
Turn on the projector. If the lamp does not turn on after the warm-up period, try  
reinstalling the lamp.  
9.  
Reset the lamp hour. Refer to the “Setting” menu.  
Dispose of the used lamp according to local regulations.  
Ensure that screws are tightened properly. Screws not tightened fully may  
result in injury or accidents.  
Since the lamp is made of glass, do not drop the unit and do not scratch the  
glass.  
Do not reuse the old lamp. This could cause the lamp to explode.  
Be sure to turn off the projector and unplug the AC power cord before  
replacing the lamp.  
Do not use the projector with the lamp cover removed.  
ViewSonic  
32  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Display Type  
Resolution (Pixels)  
Lens  
Single 0.55" DLP panel  
XGA (1024 × 768)  
Manual Zoom (1.1x)  
Screen Size  
Lamp  
30” – 250”  
PJD6220: 180W; PJD6230: 200W; PJD6240: 260W  
D-Sub 15 pin, S-video, composite video, USB, RS-232, Audio In,  
Audio Out, LAN (RJ-45 connector)  
10 W (5W x 2)  
Input / Output Source  
Speaker  
Video Compatibility  
NTSC 3.58, NTSC4.43  
PAL-60, M, N  
SECAM, HDTV (480i/p, 576i/p, 720p, 1080i)  
Scanning Frequency  
Horizontal Freq.  
Vertical Freq.  
31 - 79 KHz  
50 - 85 Hz  
Environment  
Operating:  
Temperature: 5°C to 35°C  
Humidity: 30%-85%  
Storage:  
Temperature: -20°C to 60°C  
Humidity: 30%-85%  
AC 100 - 240 V, 50 - 60 Hz  
271 x 223 x 110 mm  
2.9 kg (6.4lb)  
Power Requirement  
Dimension  
Weight  
Note: Design and Specifications are subject to change without prior notice.  
ViewSonic  
33  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
LED Indicator Messages  
LED Type  
Color  
Status  
Meaning  
LAMP LED  
TEMP LED  
Green  
Off  
Flash  
-
The projector is in standby mode.  
LAMP LED  
TEMP LED  
Green  
Green  
Solid  
Flash  
The projector system has some problems with  
its fan, so the projector cannot start up.  
LAMP LED  
TEMP LED  
Green  
Green  
Solid  
Solid  
The lamp is in good condition and is projecting  
at maximum brightness.  
LAMP LED  
TEMP LED  
Amber  
Green  
Solid  
Solid  
The lamp has reached its end of life and must  
be changed soon. The lamp will continue to  
operate until it fails. Change the lamp. If the  
lamp is off, then the ballast will become  
malfunction.  
LAMP LED  
TEMP LED  
Amber  
Amber  
Solid  
Solid  
The projector is shutting and the fan motor is  
cooling the lamp for shutdown. Do not unplug  
the power cord or turn the power off before the  
Lamp LED changes to flashing. The fan motor  
will turn off when the lamp has cooled.  
LAMP LED  
TEMP LED  
Green  
Red  
Solid  
Flash  
Temperature is too high. The lamp will turn off.  
The fan motor is cooling the lamp.  
LAMP LED  
TEMP LED  
Amber  
Off  
Solid  
-
The lamp ignition failed. If temperature is too  
high, the fans will cool the lamp.  
ViewSonic  
34  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232 Command and Configuration  
RS232 Serial Remote Control Command  
Item  
Description  
Comment  
Baud Rate  
Parity Bit  
Data Bit  
Stop Bit  
Assign Port  
19200  
none  
8
1
COM1  
Power On Command  
Send String  
Response  
Comment  
BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00  
06  
Power Off Command  
Send String  
Response  
BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00  
06  
Source Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 57, D0, 2E, 00, 00, 00, 00, 00  
06  
Auto-Sync Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 86, D1, 2F, 00, 00, 00, 00, 00  
06  
Menu(for OSD) Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, E9, D3, 30, 00, 00, 00, 00, 00  
06  
Up (for OSD) Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 6D, D2, 34, 00, 00, 00, 00, 00  
06  
ViewSonic  
35  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Down (for OSD) Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 0B, D2, 32, 00, 00, 00, 00, 00  
06  
Left (for OSD) Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, DA, D3, 33, 00, 00, 00, 00, 00  
06  
Right (for OSD) Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 38, D2, 31, 00, 00, 00, 00, 00  
06  
Blank Screen Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, DF, DF, 66, 00, 00, 00, 00, 00  
06  
Keystone Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 3D, DE, 64, 00, 00, 00, 00, 00  
06  
Keystone Up Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 10, DB, 65, 00, 00, 00, 00, 00  
06  
Keystone Down Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 23, DB, 66, 00, 00, 00, 00, 00  
06  
Image Command  
Send String  
Response  
BE, EF, 03, 06, 00, F2, DA, 67, 00, 00, 00, 00, 00  
6
Comment  
ViewSonic  
36  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViewMatch Command  
BE,EF,03,06,00,38,5A,88,00,00,00,00,00  
6
Send String  
Response  
Comment  
Aspect Ratio Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 0D, DA, 68, 00, 00, 00, 00, 00  
06  
ECO On Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, EF, DB, 6A, 00, 00, 00, 00, 00  
06  
ECO Off Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 3E, DA, 6B, 00, 00, 00, 00, 00  
06  
Auto Source On Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 89, DB, 6C, 00, 00, 00, 00, 00  
06  
Auto Source Off Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 58, DA, 6D, 00, 00, 00, 00, 00  
06  
Factory Reset Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 6B, DA, 6E, 00, 00, 00, 00, 00  
06  
Lamp Hour Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, BA, DB, 6F, 00, 00, 00, 00, 00  
Lamp Hour  
ViewSonic  
37  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Firmware Version Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, D5, D9, 70, 00, 00, 00, 00, 00  
Version  
System Status Command  
Send String  
Response  
Comment  
BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00  
03 :Projector ON (Normal Mode)  
Volume Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, F8, DC, 71, 00, 00, 00, 00, 00  
06  
Volume+ Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, F1, DE, 68, 00, 00, 00, 00, 00  
06  
Volume-Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 20, DF, 69, 00, 00, 00, 00, 00  
06  
Mute (Audio) Command  
Send String  
Response  
Comment  
BE, EF, 02, 06, 00, 0E, DE, 67, 00, 00, 00, 00, 00  
06  
Change to Computer1 (Analog RGB) Channel Command  
Send String  
Response  
Comment  
BE, EF, 03, 19, 00, 19, 29, 01, 47, 02, CC, CC, 00  
06  
Change to YcbCr Channel Command  
Send String  
Response  
Comment  
BE, EF, 03, 19, 00, 89, E8, 01, 47, 02, CC, CC, 00  
06  
ViewSonic  
38  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Change to S-Video Channel Command  
Send String  
Response  
Comment  
BE, EF, 03, 19, 00, E8, 69, 01, 47, 02, CC, CC, 00  
06  
Change to Composite Video Channel Command  
Send String  
Response  
Comment  
BE, EF, 03, 19, 00, 78, A8, 01, 47, 02, CC, CC, 00  
06  
Change to HDTV(Y-Pb-Pr) Channel Command  
Send String  
Response  
Comment  
BE, EF, 03, 19, 00, DA, 2B, 01, 47, 02, CC, CC, 00  
06  
Change to Computer2(Analog RGB) Channel Command  
Send String  
Response  
Comment  
BE, EF, 03, 19, 1E, 90, 72, 01, 47, 02, CC, CC, 00  
06  
* The output effects of Change to YcbCr Channel Command and Change to HDTV(Y-Pb-Pr)  
Channel Command are the same as that of Change to Computer1 (Analog RGB) Channel  
Command.  
CTSZ  
TXD  
RSTZ  
RXD  
GND  
ViewSonic  
39  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatibility Modes  
Computer:  
Compatibility  
Resolution  
H-Sync [KHz]  
31.5  
37.9  
37.5  
43.3  
35.2  
37.9  
48.1  
46.9  
53.7  
48.4  
56.5  
60.0  
68.7  
64.0  
67.5  
60.0  
75.0  
64.0  
47.8  
60.3  
68.6  
49.7  
62.8  
V-Sync [Hz]  
59.9  
72.8  
75.0  
85.0  
56.3  
60.3  
72.2  
75.0  
85.1  
60.0  
70.1  
75.0  
85.0  
70.0  
75.0  
60.0  
75.0  
60.0  
60.0  
74.9  
84.8  
59.8  
74.9  
VGA  
640 x 480  
SVGA  
800 x 600  
XGA  
1024 x 768  
SXGA  
1152 x 864  
1280 x 960  
1280 x 1024  
1280 x 768  
WXGA  
1280 x 800  
Video:  
Signal  
480i  
Horizontal Frequency (kHz)  
15.8 kHz  
Vertical Frequency (Hz)  
60 Hz  
60 Hz  
50 Hz  
50 Hz  
60 Hz  
50 Hz  
60 Hz  
50 Hz  
480p  
576i  
31.5 kHz  
15.6 kHz  
576p  
720p  
720p  
1080i  
1080i  
31.3 kHz  
45.0 kHz  
37.5 kHz  
33.8 kHz  
28.1 kHz  
ViewSonic  
40  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the symptoms and measures listed below before sending the projector  
forrepairs. If the problem persists, contact your local reseller or service center. Please  
refer to "Indicator Messages" as well.  
Start-up problems  
If no lights turn on:  
Be sure that the power cord is securely connected to the projector and the other end  
is plugged into an outlet with power.  
Press the power button again.  
Unplug the power cord and wait for a short while, then plug it in and press the power  
button again.  
Image problems  
If the searching source is displayed:  
Press the Source button one or more times to select another active input source.  
Be sure the external source is turned on and connected.  
For a computer connection, ensure your notebook computer’s external video port is  
turned on. Refer to the computer manual.  
If the image is out of focus:  
Be sure the lens cover is open.  
While displaying the on-screen menu, adjust the focus ring. (The image size should  
not change; if it does, you are adjusting the zoom, not the focus.)  
Check the projection lens to see if it needs cleaning.  
If the image is flickering or unstable for a computer connection:  
Press the Resync button on the control panel.  
Press the Menu button on the control panel or the MENU button on the remote  
control, go to Computer Image and adjust Frequency or Tracking.  
Remote control problems  
If the remote control does not operate:  
Be sure nothing is blocking the remote control receiver on the front or back of the  
projector. Use the remote control within the effective range.  
Aim the remote control at the screen or at the front or back of the projector.  
Move the remote control so it is more directly in front of or behind the projector and  
not as far to the side.  
ViewSonic  
41  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
Note : You will need the product serial number.  
T=Telephone  
Country/Region  
Australia/New Zealand  
Canada  
Web Site  
E-mail  
F=Fax  
AUS=1800 880 818  
NZ=0800 008 822  
T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533  
F= 1-909-468-1202  
Europe/Middle East/Baltic  
countries/North Africa  
Contact your reseller  
T= 852 3102 2900  
T= 1800 11 9999  
T= 080 265 9080  
T= 0800 666 0194  
T= 0800 891 6984  
T= 800 440 303  
Hong Kong  
India  
Korea  
Latin America (Argentina)  
Latin America (Brazil)  
Latin America (Chile)  
Latin America (Columbia)  
Latin America (Mexico)  
T= 01 800 915 6588  
T= 001 800 514 6518  
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS  
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16  
Latin America (Peru)  
Macau  
T= 0800 53458  
T= 853 700 303  
T= 1-800-688-6688 (English)  
T= 1-866-379-1304 (Spanish)  
F= 1-909-468-1202  
Puerto Rico & Virgin Islands  
Singapore/Malaysia/Thailand  
South Africa  
T= 65 6461 6044  
United Kingdom  
T (Toll-Free)= 1-800-688-6688  
United States  
T (Toll)= 1-424-233-2530  
F= 1-909-468-1202  
ViewSonic  
42  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
VIEWSONIC® PROJECTOR  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under  
normal use, during the warranty period. If a product proves to be defective in material or  
workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace  
the product with a like product. Replacement product or parts may include remanufactured or  
refurbished parts or components.  
How long the warranty is effective:  
North and South America: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for  
the original lamp from the date of the first consumer purchase.  
Europe: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp  
from the date of the first consumer purchase.  
Other regions or countries: Please check with your local dealer or local ViewSonic office for the  
warranty information.  
Lamp warranty subject to terms and conditions, verification and approval. Applies to  
manufacturer’s installed lamp only.  
All accessory lamps purchased separately are warranted for 90 days.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Any damage of the product due to shipment.  
d. Removal or installation of the product.  
e. Causes external to the product, such as electric power fluctuations or failure.  
f. Use of supplies or parts not meeting ViewSonic’s specifications.  
g. Normal wear and tear.  
h. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results when  
a static image is displayed on the product for an extended period of time.  
4. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer  
Support (please refer to “Customer Support” page). You will need to provide your product’s  
serial number.  
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your  
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic  
service center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact  
ViewSonic.  
ViewSonic  
43  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained  
herein including the implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic  
shall not be liable for:  
1. Damage to other property caused by any defects in the product, damages based upon  
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business  
opportunity, loss of goodwill, interference with business relationships, or other commercial  
loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state. Some states do not allow limitations on implied warranties and/or do not allow the  
exclusion of incidental or consequential damages, so the above limitations and exclusions may  
not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and  
Canada, contact ViewSonic or your local ViewSonic dealer.  
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan  
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.  
For users in Europe and Russia, full details of warranty provided can be found in www.  
viewsoniceurope.com under Support/Warranty Information.  
4.3: Projector Warranty  
PRJ_LW01 Rev. 1h 06-25-07  
ViewSonic  
44  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mexico Limited Warranty  
VIEWSONIC® PROJECTOR  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal  
use, during the warranty period. If a product proves to be defective in material or workmanship during  
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.  
Replacement product or parts may include remanufactured or refurbished parts or components & accessories.  
How long the warranty is effective:  
3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer  
purchase.  
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only.  
All accessory lamps purchased separately are warranted for 90 days.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product.  
b. Any damage of the product due to shipment.  
c. Causes external to the product, such as electrical power fluctuations or failure.  
d. Use of supplies or parts not meeting ViewSonic’s specifications.  
e. Normal wear and tear.  
f. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static  
image is displayed on the product for an extended period of time.  
4. Removal, installation, insurance, and set-up service charges.  
How to get service:  
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to  
the attached Customer Support page). You will need to provide your product’s serial number, so please record  
the product information in the space provided below on your purchase for your future use. Please retain your  
receipt of proof of purchase to support your warranty claim.  
For Your Records  
Product Name: ________________________  
Document Number: ____________________  
Purchase Date: ________________________  
Model Number: __________________________  
Serial Number: ___________________________  
Extended Warranty Purchase? _______________(Y/N)  
If so, what date does warranty expire? _________  
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your  
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.  
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.  
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein including  
the implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,  
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,  
interference with business relationships, or other commercial loss, even if advised of the possibility of  
such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
4. Repair or attempted repair by anyone not authorized by ViewSonic.  
ViewSonic  
45  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:  
Name, address, of manufacturer and importers:  
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,  
Col. San Fernando Huixquilucan, Estado de México  
Tel: (55) 3605-1099  
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004  
Hermosillo:  
Villahermosa:  
Distribuciones y Servicios Computacionales SA de CV. Compumantenimietnos Garantizados, S.A. de C.V.  
Calle Juarez 284 local 2  
AV. GREGORIO MENDEZ #1504  
Col. Bugambilias C.P: 83140  
Tel: 01-66-22-14-9005  
COL, FLORIDA C.P. 86040  
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09  
Puebla, Pue. (Matriz):  
Veracruz, Ver.:  
RENTA Y DATOS, S.A. DE C.V. Domicilio:  
29 SUR 721 COL. LA PAZ  
CONEXION Y DESARROLLO, S.A DE C.V. Av.  
Americas # 419  
72160 PUEBLA, PUE.  
Tel: 01(52).222.891.55.77 CON 10 LINEAS  
ENTRE PINZÓN Y ALVARADO  
Fracc. Reforma C.P. 91919  
Tel: 01-22-91-00-31-67  
Chihuahua  
Cuernavaca  
Soluciones Globales en Computación  
C. Magisterio # 3321 Col. Magisterial  
Chihuahua, Chih.  
Tel: 4136954  
Compusupport de Cuernavaca SA de CV  
Francisco Leyva # 178 Col. Miguel Hidalgo  
C.P. 62040, Cuernavaca Morelos  
Tel: 01 777 3180579 / 01 777 3124014  
Distrito Federal:  
Guadalajara, Jal.:  
QPLUS, S.A. de C.V.  
Av. Coyoacán 931  
Col. Del Valle 03100, México, D.F.  
Tel: 01(52)55-50-00-27-35  
E-Mail : [email protected]  
SERVICRECE, S.A. de C.V.  
Av. Niños Héroes # 2281  
Col. Arcos Sur, Sector Juárez  
44170, Guadalajara, Jalisco  
Tel: 01(52)33-36-15-15-43  
Guerrero Acapulco  
Monterrey:  
GS Computación (Grupo Sesicomp)  
Progreso #6-A, Colo Centro  
39300 Acapulco, Guerrero  
Tel: 744-48-32627  
Global Product Services  
Mar Caribe # 1987, Esquina con Golfo Pérsico  
Fracc. Bernardo Reyes, CP 64280  
Monterrey N.L. México  
Tel: 8129-5103  
MERIDA:  
Oaxaca, Oax.:  
ELECTROSER  
CENTRO DE DISTRIBUCION Y  
SERVICIO, S.A. de C.V.  
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca  
Tel: 01(52)95-15-15-22-22  
Av Reforma No. 403Gx39 y 41  
Mérida, Yucatán, México CP97000  
Tel: (52) 999-925-1916  
Fax: 01(52)95-15-13-67-00  
Tijuana:  
FOR USA SUPPORT:  
STD  
ViewSonic Corporation  
Av Ferrocarril Sonora #3780 L-C  
Col 20 de Noviembre  
Tijuana, Mexico  
381 Brea Canyon Road, Walnut, CA. 91789 USA  
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);  
Fax: 1-800-685-7276  
4.3: ViewSonic Mexico Limited Warranty  
PRJ_LW03 Rev. 1A 06-25-07  
ViewSonic  
46  
PJD6220/PJD6230/PJD6240  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Telex Intercom System US2002 User Manual
Telex Stereo System 840 35A User Manual
Toshiba Projection Television 57HX94 User Manual
Tripp Lite Surge Protector TLM626 User Manual
True Fitness Treadmill CS10 User Manual
Uniflame Outdoor Fireplace WAD906SP User Manual
VistaQuest Digital Camera VQ6100 User Manual
Vivotek Digital Camera IP7151 User Manual
Vulcan Hart Oven Accessories VCH16 ML 126367 User Manual
VXI Headphones USB 100 User Manual