®
ViewSonic
- User Guide
PJ260D
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
DLP Projector
- Руководство пользователя
- 使用手冊 (繁體)
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service. Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found
using the Regional selection box in the upper right corner of our website.
- 使用手冊 (簡體)
“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”
Model No. : VS11935
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this unit near water.
Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for
further instructions.
7.
8.
9.
Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience
receptacles and the point where they exit from the unit. Be sure that the power outlet is
located near the unit so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit. When a cart is used, use caution when
moving the cart/unit combination to avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is
spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the
unit does not operate normally or has been dropped.
ViewSonic
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
PJ260D
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of
the European Parliament and the Council on restriction of the use of certain hazardous substances
in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the
maximum concentration values issued by the European Technical Adaptation Committee (TAC)
as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
ViewSonic
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
PJ260D
Copyright Information
Copyright© ViewSonic© Corporation, 2007. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks
of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you
may mail or fax to ViewSonic.
For Your Records
Product Name:
PJ260D
ViewSonic DLP Projector
VS11935
Model Number:
Document Number:
Serial Number:
Purchase Date:
PJ260D_UG_ENG Rev. 1B 11-21-07
______________________________
______________________________
The lamp in this product contains mercury.
Please dispose of in accordance with local, state or federal laws.
ViewSonic
iv
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Projector Features .......................................................................................................1
Package Contents .......................................................................................................2
Projector Overview ......................................................................................................3
Control Panel ..............................................................................................................5
Connection Ports .........................................................................................................6
Remote Control ...........................................................................................................7
Replacing the Battery ..................................................................................................8
Remote Control Operation ..........................................................................................9
Connecting the Projector ...........................................................................................10
Powering On/Off the Projector ..................................................................................11
Adjusting the Projector ..............................................................................................12
Cleaning the Lens .....................................................................................................18
Cleaning the Projector Housing ................................................................................18
Replacing the Lamp ..................................................................................................19
Appendix ..................................................................................... 22
LED Indicator Messages ...........................................................................................22
Compatibility Modes ..................................................................................................23
Troubleshooting ........................................................................................................24
Customer Support......................................................................................................25
Limited Warranty........................................................................................................26
Mexico Limited Warranty............................................................................................28
ViewSonic
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
®
„
„
„
Single chip 0.55" Texas Instruments DLP technology
XGA (1024 x 768 pixels)
Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling
compression compatibility for VGA, SVGA, XGA and SXGA*
®
„
„
„
„
„
Compatibility with Macintosh computers
Compatibility with NTSC, PAL, SECAM and HDTV
D-Sub 15-pin terminal for analog video connectivity
User-friendly, multi-language on-screen display
Advanced electronic keystone correction
* means compressed.
Notes on the AC Power Cord
AC Power Cord must meet the requirement of countries where you use this projector. Please
confirm your AC plug type with the graphics below and ensure that the proper AC Power
Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact
your sales dealer. This projector is equipped with a grounding type AC line plug. Please
ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type
plug. We highly recommend using a video source device also equipped with a grounding
type AC line plug to prevent signal interference due to voltage fluctuations.
Ground
ViewSonic
1
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
When you unpack the projector, make sure you have all these components:
Projector with Lens Cap
Remote Control (IR)
Quick Start Guide
AC Power Cord
VGA Cable (D-SUB to D-SUB)
CD-Wizard
AAA size batteries
for remote control
Projector Carrying Case
„
„
Save the original shipping carton and packing material; they will comein handy
if you ever to ship your unit. For maximum protection, repack your unit as it was
originally packed at the factory.
Accessories and components may vary by retailer and region.
ViewSonic
2
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View
Kensington lock
Rear IR remote control sensor
Connection ports
AC power socket
Ventilation holes
1
2
3
4
5
Bottom View
Elevator button
Elevator foot
Lamp cover
Tilt-adjustment foot
1
2
3
4
ViewSonic
4
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Product
Control Panel
LED
2
1
5
6
7
8
4
3
Lamp LED indicator
1
Refer to “LED Indicator Messages”.
Power LED indicator
2
Refer to “LED Indicator Messages”.
Button Function
MENU
3
Display or exit the on screen display menus.
4
Turn the projector on or off.
SOURCE
Manually select an input source.
5
6
Keystone
Correct the keystone distortion.
Four directional buttons
Use four directional buttons to select items or make adjustments to your
selection.
7
8
RESYNC
Resynchronize the projector to the input signal from a computer. This function is
available for computer mode only.
ViewSonic
5
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Ports
1
2
3
4
5
SERVICE
1
Firmware update.
COMPUTER IN
2
Input analog RGB signal from a computer or other source, or a component video
signal (Y/P /P ) from video equipment.
B
R
S-VIDEO
3
4
5
Input S-video signals from video equipment.
VIDEO
Input video signals from video equipment.
AUDIO IN
Input audio signals.
ViewSonic
6
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Power
1
Turn the projector on or off.
Four directional buttons
2
Use four directional buttons to select
items or make adjustments to your
selection.
MENU
3
Display or exit the on-screen display
menus.
Laser
4
Aim the remote at the viewing screen,
press and hold this button to activate
the laser pointer.
Keystone + / -
5
Correct the keystone distortion.
Mute
6
Cut off the sound temporarily. Press
again to cancel the Mute function.
Resync
7
Resynchronize the projector to the
input signal from a computer. This
function is available for computer
mode only.
Blank Screen
8
Cut off the screen temporarily. Press
again to cancel the Blank Screen
function.
ViewMatch
9
Switch the white peaking.
Source
10
Manually select an input source.
Volume + / -
11
Adjust the volume level.
Freeze
12
Press "Freeze" to pause the screen
image. Press again to cancel the
Freeze function.
ViewSonic
7
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Batteries
1.
2.
3.
Open the battery cover in the
direction shown.
Install batteries as indicated by the
diagram inside the compartment.
Close the battery cover into
position.
„
Keep the batteries out of the reach of children. There is a danger of death
by accidentally swallowing the batteries.
„
„
Remove batteries from remote control when not using for extended periods.
Do not dispose of the used batteries along with household waste. Dispose
of used batteries according to local regulations.
„
Danger of explosion may happen if batteries are incorrectly replaced.
Replce all the batteries with new ones.
ViewSonic
8
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Operation
Point the remote control at the infrared remote sensor and press a button.
„
Operating the projector from
the front
„
Operating the projector from
the rear
„
„
Do not point the laser directly to the people's eyes (especially small children).
There is a danger of injury to the eyes.
The remote control may not operate when there is sunlight or other strong
light such as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is visible.
Do not drop the remote control or jolt it.
Keep the remote control out of locations with excessively high temperature or
humidity.
„
„
„
„
„
Do not get water on the remote control or place wet objects on it.
Do not disassemble the remote control.
ViewSonic
9
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the Projector
USB Cable
VGA (D-SUB) to HDTV (RCA) Cable
S-Video Cable
1
4
5
6
VGA Cable (D-Sub to D-Sub)
2
Audio Cable
Composite Video Cable
3
„
„
„
When connecting cable, power cords of both a projector and external
equipment should be disconnected from AC outlet.
The figure above is a sample connection. This does not mean that all of these
devices can or must be connected simultaneously.
The cables that come with the projector may differ from the above illustration.
The included cables are based on actual shipment delivery.
ViewSonic
10
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering On/Off the Projector
Powering On the Projector:
1.
2.
3.
Remove the projector lens cap.
Complete the AC power cord and peripheral signal cable(s) connections.
Press
button to turn on the projector.
The projector takes a minute or so to warm up.
Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
4.
„
If you are connecting multiple sources to the projector simultaneously, press
the SOURCE button on the control panel or the Source button on the remote
control.
Warning:
„
„
Remove the lens cap first before powering on.
Never look into the lens when the lamp is on. This can damage your eyes. It
is especially important that children are not allowed to look into the lens.
Powering Off the Projector:
1.
Press
Press Power again" appear on the screen.
Press button again to confirm.
button to turn off the projector lamp. You will see a message "Power off?
2.
„
„
„
The cooling fans continue to operate for cooling cycle and the Lamp LED will
keep flashing.
When the Power LED begins flashing, the projector has entered stand-by
mode.
If you want to turn the projector back on, you must wait until the projector has
completed the cooling cycle and has entered stand-by mode. Once in
stand-by mode, simply press
button to restart the projector.
3.
4.
Disconnect the AC power cord from the electrical outlet and the projector.
Do not turn on the projector immediately following a power off procedure.
ViewSonic
11
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Adjusting the Projector Height
Tilt-adjustment foot
Elevator foot
Elevator button
The projector is equipped with an elevator foot to adjust the image height.
To raise or lower the image:
1.
To raise or lower the image, press the elevator button and raise or lower the front
of the projector. Release the button to lock the adjustment.
2.
To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.
„
To avoid damaging the projector, make sure that the elevator foot and
tilt-adjustment foot are fully retracted before placing the projector in its
carrying case.
Adjusting the Projector Zoom and Focus
Zoom ring
Focus ring
1.
2.
Focus the image by rotating the focus ring. A still image is recommended for focusing.
Adjust the image by sliding the zoom ring.
ViewSonic
12
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection distance.
Projection Distance
(meters)
Screen Size (for 4:3 aspect ratio diagonal length)
Wide (inches)
40.7
Tele (inches)
34.6
1.6
2
50.8
43.2
3
75.3
64.1
5
125.2
250
106.7
213.0
255.5
10
12
300
„
Position the projector in a horizontal position; other positions can cause heat
build-up and damage to the projector.
„
„
Make sure the heat ventilation holes are not blocked.
Do not use the projector in a smoky environment. Smoke residue may
cause build-up on critical parts (i.e. DMD, lens assembly, etc.)
ViewSonic
13
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
How to operate
1.
2.
3.
Press the MENU button to open the OSD menu.
When OSD is displayed, use to select any feature in the main menu.
After selecting the desired main menu feature, press X to enter sub-menu for
S
/
T
feature setting.
4.
5.
6.
Adjust the settings with
W
/
X.
Press the MENU button, the screen will return to the main menu.
To exit OSD, press the MENU button again. The OSD menu will close and the
projector will automatically save the new settings.
Picture (Computer / Video Mode)
Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas.
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower
temperature, the screen looks warmer. If you select “User”, “Red”, “Green” and “Blue”
cab be adjusted.
Keystone
Correct the keystone distortion.
Aspect Ratio
Select how the picture fits on the screen:
„
„
4:3 :The input source will be scaled to fit the projection screen.
16:9 :The input source will be scaled to fit the width of the screen.
Image
There are many factory presets optimized for various types of images.
„
„
„
„
PC : For computer or notebook.
Movie : For home theater.
sRGB : For PC standard color.
User : Memorize user’s settings.
White Intensity
Increase the brightness of white areas.
Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.
ViewSonic
15
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer Image (Computer Mode)
Frequency
Adjust the timing of the projector relative to the computer.
Tracking
Adjust the phase of the projector relative to the computer.
H Position (Horizontal Position)
Adjust the image left or right within the projection area.
V Position (Vertical Position)
Adjust the image up or down within the projection area.
Video Image (Video Mode)
Color
Adjust the intensity of colors.
Sharpness
Sharpen or soften the image.
Tint
Shift colors toward red or green.
Sound (Computer / Video Mode)
Volume
Adjust the volume level.
Mute
Cut off the sound temporarily.
Setting (Computer / Video Mode)
Menu Position
Choose the menu location on the display screen.
Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in
front of or behind the screen. Invert or reverse the image accordingly.
Signal Type
Specify the signal source that you wish to project.
„
„
„
YPbPr: For composite video cable.
RGB: For VGA cable.
YCbCr: For S-Video cable.
ViewSonic
16
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp Counter
Display the lamp’s elapsed operating time (in hours).
Lamp Counter Reset
Reset the lamp counter to 0 hours.
Power Saving
If no operation is performed for a specific period of time, the power to the projector is
automatically turned off.
Auto Source
Automatically scan the input source.
ECO Mode
Use this function to dim the projector lamp light output which will lower power
consumption and increase lamp life.
High Altitude
Turning on High Altitude mode operates the fans at full speed continuously to allow for
proper high altitude cooling of the projector.
OSD Timeout
Duration OSD menu stays active (at idle state by second).
Option (Computer / Video Mode)
Blank Screen
Blank the screen temporarily, and select the screen color when this function is active.
Start-up Screen
Select start-up screen when the projector is powered on or when no signal is input.
“User” is the screen that you captured.
Screen Capture
Capture the current projection screen as a start-up screen.
Password
Set or change the password. When the password function is added, image projection
requires an entry of the preset password at power-on.
Language (Computer / Video Mode)
Select the language used by the on-screen menu.
Factory Default (Computer / Video Mode)
Restore all menu settings to factory default settings.
ViewSonic
17
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt
or spots will project on the screen and diminish image quality. If any other parts need
replacing, contact your dealer or qualified service personnel. When cleaning any part
of the projector, always switch off and unplug the projector first.
Warning:
Never open any of the covers on the projector. Dangerous electrical voltages inside
the projector can cause severe injury. Do not attempt to service this product yourself.
Refer all servicing to qualified service personnel.
Cleaning the Lens
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.
Cleaning the Projector Housing
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth
damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.
„
Turn off the projector and remove the AC power cord from the power outlet
before beginning maintenance work.
„
„
Make sure the lens is cool before cleaning.
Do not use detergents or chemicals other than those noted above. Do not use
benzene or thinners.
„
„
Do not use chemical sprays.
Use a soft cloth or lens paper only.
ViewSonic
18
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp
As the projector operates over time, the brightness of the projector lamp gradually
decreases and the lamp becomes more susceptible to breakage. We recommend
replacing the lamp if a warning message is displayed. Do not attempt to replace the
lamp yourself. Contact the qualified service personnel for replacement.
„
The lamp becomes high temperature after turning off the projector with the
power button. If you touch the lamp, you may scald your finger. When you
replace the lamp, wait for at least 45 minutes for the lamp to cool down.
„
„
Do not touch the lamp glass at any time. The lamp may explode due to
improper handling, including the touching of the lamp glass.
Lamp lifetime may differ from lamp to lamp and according to the environment
of use. There is no guarantee of the same lifetime for each lamp. Some lamps
may fail or terminate their lifetime in a shorter period of time than other similar
lamps.
„
A lamp may explode as a result of vibration, shock or degradation as a result of
hours of use as its lifetime draws to an end. Risk of explosion may differ
according to the environment or conditions in which the projector and lamp are
being used.
„
„
Wear protective gloves and eyeglasses when fixing or detaching the lamp.
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least
for 5 minutes to turn off the projector after powering on.
„
„
„
Do not operate the lamp in proximity to paper, cloth, or other combustible
material nor cover it with such materials. Otherwise it could cause a fire.
Do not operate the lamp in an atmosphere containing an inflammable
substance, such as thinner. Otherwise it could cause a fire or explosion.
Thoroughly ventilate the area or the room when operating the lamp in an
oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches,
nausea, dizziness, etc.
„
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury
inside the lamp will go out of the projector. Leave the area immediately if the
lamp shatters while being operated and ventilate the area for at least 30
minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be
harmful to user’s health.
ViewSonic
19
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
Turn off the projector.
Unplug the power cord.
3.
Place a protective sheet (cloth)
beneath the projector. Turn the
projector over so you can access
the lamp cover.
4.
5.
Loosen the screw in the lamp cover
and remove the cover.
Remove the screws from the lamp
module, raise the handle, and lift
out the module.
6.
7.
8.
Insert the new lamp module into the
projector and tighten the screws.
Replace the lamp cover and tighten
the screw.
Turn on the projector. If the lamp
does not turn on after the warm-up
period, try reinstalling the lamp.
Reset the lamp hour. Refer to the
“Setting (Computer / Video Mode)”
menu.
9.
„
„
Dispose of the used lamp according to local regulations.
Ensure that screws are tightened properly. Screws not tightened fully may
result in injury or accidents.
„
Since the lamp is made of glass, do not drop the unit and do not scratch the
glass.
„
„
Do not reuse the old lamp. This could cause the lamp to explode.
Be sure to turn off the projector and unplug the AC power cord before
replacing the lamp.
„
Do not use the projector with the lamp cover removed.
ViewSonic
20
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Display Type
Resolution (Pixels)
Brightness
Single 0.55" DLP panel
XGA (1024 x 768)
2000 ANSI Lumens
Lens
Manual Zoom (1.17x)
Contrast Ratio
Screen Size
Lamp
2000:1
35” – 300”
200W
I/O Connectors
AC power input socket x 1, VGA In x 1, S-Video x 1, Composite
In x 1, Audio In x 1 (3.5mm phone jack), USB x 1 (firmware
upgrade only)
Video Compatibility
NTSC, NTSC 4.43
PAL, PAL-N, PAL M,
SECAM,
HDTV (480P, 576P, 720P, 1080i)
Composite video and S-video
Scanning Frequency
Horizontal Freq.
Vertical Freq.
Audio
15 - 100 KHz
43 - 120 Hz
1 x 2W
Noise Level
Normal: 36dBA; ECO: 34dBA
Operating:
Environment
Temperature: 5°C to 35°C
Humidity: 80% maximum
Storage:
Temperature: -20°C to 60°C
Humidity: 80% maximum
AC 100 - 240 V, 50 / 60 Hz
260 W
Power Requirement
Power Consumption
Dimension
210 x 65 x 165 mm
1.3 kg (2.9 lbs)
Weight
Note: Design and Specifications are subject to change without prior notice.
ViewSonic
21
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
LED Indicator Messages
LED Type
Color
Status
Meaning
Power LED
Lamp LED
Green
Off
Flash
-
The projector is in standby mode.
Power LED
Lamp LED
Green
Red
Solid
Solid
The projector system has some problems with
its fan, so the projector cannot start up.
Power LED
Lamp LED
Green
Off
Solid
-
The lamp is in good condition and is projecting
at maximum brightness.
Power LED
Lamp LED
Amber
Red
Solid
Solid
The lamp has reached its end of life and must
be changed soon. The lamp will continue to
operate until it fails. Change the lamp. If the
lamp is off, then the ballast will become
malfunction.
Power LED
Lamp LED
Amber
Off
Solid
-
The projector is shutting the fan motor is
cooling the lamp for Shutdown. Do not unplug
the power cable or turn the power switch off
before the Power LED Change to Flashing. The
fan motor will turn off when the lamp has
cooled.
Power LED
Lamp LED
Green
Red
Solid
Flash
Temperature is too high. The lamp will turn off.
The fan motor is cooling the lamp.
Power LED
Lamp LED
Amber
Red
Solid
Flash
The lamp ignition failed. If temperature is too
high, the fans will be cooling the lamp.
ViewSonic
22
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatibility Modes
Computer:
Compatibility
Resolution
H-Sync [KHz]
31.5
V-Sync [Hz]
59.9
72.8
75.0
85.0
56.3
60.3
72.2
75.0
85.1
60.0
70.1
75.0
85.0
70.0
75.0
60.0
75.0
60.0
VGA
640 x 480
37.9
37.5
43.3
SVGA
800 x 600
35.2
37.9
48.1
46.9
53.7
XGA
1024 x 768
48.4
56.5
60.0
68.7
SXGA
1152 x 864
1280 x 960
1280 x 1024
64.0
67.5
60.0
75.0
64.0
Video:
Signal
480i
Horizontal Frequency (kHz)
15.8 kHz
Vertical Frequency (Hz)
60 Hz
60 Hz
50 Hz
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
480p
576i
31.5 kHz
15.6 kHz
576p
720p
720p
1080i
1080i
31.3 kHz
45.0 kHz
37.5 kHz
33.8 kHz
28.1 kHz
ViewSonic
23
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the symptoms and measures listed below before sending the projector
forrepairs. If the problem persists, contact your local reseller or service center. Please
refer to "Indicator Messages" as well.
Start-up problems
If no lights turn on:
„
Be sure that the power cord is securely connected to the projector and the other end
is plugged into an outlet with power.
„
„
Press the power button again.
Unplug the power cord and wait for a short while, then plug it in and press the power
button again.
Image problems
If the searching source is displayed:
„
Press the SOURCE button on the control panel or the Source button on the remote
control one or more times to select another active input source.
Be sure the external source is turned on and connected.
„
„
For a computer connection, ensure your notebook computer’s external video port is
turned on. Refer to the computer manual.
If the image is out of focus:
„
„
Be sure the lens cover is open.
While displaying the on-screen menu, adjust the focus ring. (The image size should
not change; if it does, you are adjusting the zoom, not the focus.)
Check the projection lens to see if it needs cleaning.
„
If the image is flickering or unstable for a computer connection:
„
Press the RESYNC button on the control panel or the Resync button on the remote
control.
„
Press the MENU button, go to Computer Image and adjust Frequency or
Tracking.
Remote control problems
If the remote control does not operate:
„
Be sure nothing is blocking the remote control receiver on the front or back of the
projector. Use the remote control within the effective range.
Aim the remote control at the screen or at the front or back of the projector.
Move the remote control so it is more directly in front of or behind the projector and
not as far to the side.
„
„
ViewSonic
24
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T=Telephone
Country/Region
Web Site
E-mail
F=Fax
AUS=1800 880 818
NZ=0800 008 822
T= 1-866-463-4775
F= 1-909-468-5814
Australia/New Zealand
Canada
Europe/Middle East/Baltic
countries/North Africa
Contact your reseller
T= 852 3102 2900
T= 1800 11 9999
T= 080 265 9080
Hong Kong
India
Korea
T= 0800-666-0098
F= 1-909-444-5655
T= 0800-891-1829
F= 1-909-444-5655
T= 800-440303
Latin America (Argentina)
Latin America (Brazil)
Latin America (Chile)
Latin America (Columbia)
Latin America (Mexico)
F= 1-909-444-5655
T= 01800-9-156588
F= 1-909-444-5655
T= 001-866-823-2004
F= 1-909-444-5655
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
T= 0800-53311
Latin America (Peru)
F= 1-909-444-5655
Macau
T= 853 700 303
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-1202
Puerto Rico & Virgin Islands
Singapore/Malaysia/Thailand
South Africa
T= 65 6461 6044
United Kingdom
United States
T= 1-800-688-6688
F= 1-909-468-1202
ViewSonic
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PJ260D
Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under
normal use, during the warranty period. If a product proves to be defective in material or
workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace
the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components.
How long the warranty is effective:
North and South America: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for
the original lamp from the date of the first consumer purchase.
Europe: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp
from the date of the first consumer purchase.
Other regions or countries: Please check with your local dealer or local ViewSonic office for the
warranty information.
Lamp warranty subject to terms and conditions, verification and approval. Applies to
manufacturer’s installed lamp only.
All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when
a static image is displayed on the product for an extended period of time.
4. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer
Support (please refer to “Customer Support” page). You will need to provide your product’s
serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic
service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact
ViewSonic.
ViewSonic
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PJ260D
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained
herein including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic
shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business
opportunity, loss of goodwill, interference with business relationships, or other commercial
loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Some states do not allow limitations on implied warranties and/or do not allow the
exclusion of incidental or consequential damages, so the above limitations and exclusions may
not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and
Canada, contact ViewSonic or your local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.
For users in Europe and Russia, full details of warranty provided can be found in www.
viewsoniceurope.com under Support/Warranty Information.
4.3: Projector Warranty
PRJ_LW01 Rev. 1h 06-25-07
ViewSonic
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PJ260D
Mexico Limited Warranty
VIEWSONIC® PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
How long the warranty is effective:
3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer
purchase.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only.
All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Causes external to the product, such as electrical power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static
image is displayed on the product for an extended period of time.
4. Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to
the attached Customer Support page). You will need to provide your product’s serial number, so please record
the product information in the space provided below on your purchase for your future use. Please retain your
receipt of proof of purchase to support your warranty claim.
For Your Records
Product Name: ________________________
Document Number: ____________________
Purchase Date: ________________________
Model Number: __________________________
Serial Number: ___________________________
Extended Warranty Purchase? _______________(Y/N)
If so, what date does warranty expire? _________
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including
the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
ViewSonic
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PJ260D
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
Tel: (55) 3605-1099
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV. Compumantenimietnos Garantizados, S.A. de C.V.
Calle Juarez 284 local 2
AV. GREGORIO MENDEZ #1504
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
E-Mail: [email protected]
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
Puebla, Pue. (Matriz):
Veracruz, Ver.:
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
CONEXION Y DESARROLLO, S.A DE C.V. Av.
Americas # 419
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Chihuahua
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Distrito Federal:
Guadalajara, Jal.:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : [email protected]
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Guerrero Acapulco
Monterrey:
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: 8129-5103
E-Mail: [email protected]
MERIDA:
Oaxaca, Oax.:
ELECTROSER
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
Tijuana:
FOR USA SUPPORT:
STD
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
PRJ_LW03 Rev. 1A 06-25-07
ViewSonic
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PJ260D
Download from Www.Somanuals.com. All Manuals Search And Download.
|