®
ViewSonic
- User Guide
PJ458D
DLP Projector
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guia do usuário
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
- 사용자 안내서
Model No. : VS10872
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this unit near water.
Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this
guide for further instructions.
7.
8.
9.
Do not block any ventilation openings. Install the unit in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs.
Convenience receptacles and the point where they exit from the unit. Be sure
that the power outlet is located near the unit so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit. When a cart is used, use caution
when moving the cart/unit combination to avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as: if the power-supply cord or plug
is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is
exposed to rain or moisture, or if the unit does not operate normally or has been
dropped.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive
2002/95/EC of the European Parliament and the Council on restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS Directive)
and is deemed to comply with the maximum concentration values issued by the
European Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Concentration
Actual
Concentration
Substance
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the
RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other
lamps not specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and
electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by
weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight,
aluminium containing up to 0.4% lead by weight and as a cooper alloy containing
up to 4% lead by weight.
ViewSonic PJ458D
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright © ViewSonic® Corporation, 2007. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks
of Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds’ logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association.
DPMS and DDC are trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines
Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves
the right to change product specifications without notice. Information in this document
may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for
any purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it
com. The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print
the registration form, which you may mail or fax to ViewSonic.
For Your Records
Product Name:
PJ458D
ViewSonic DLP Projector
VSꢀ087ꢁ
Model Number:
Document Number:
Serial Number:
Purchase Date:
PJ458D-ꢀ_UG_ENG Rev.ꢀC 0ꢁ-ꢁ6-07
The lamp in this product contains mercury.
Please dispose of in accordance with local, state or federal laws.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
Notes on AC Power Cord
AC Power Cord must meet requirement of country where you use a projector.
Confirm an AC plug type with graphics below and proper AC Power Cord must be
used. If supplied AC Power Cord does not match your AC outlet, contact your sales
dealer.
This projector is equipped with a grounding type AC line plug. Make sure that your
outlet fits the plug. Do not defeat the safety purpose of this grounding type plug.
We highly recommend using a video source device also equipped with a grounding
type AC line plug to prevent from signal interference due to voltage fluctuation.
Ground
Ground
For Australia and
Mainland China�
For the U.S.A. and Canada
Ground
Ground
For Continental Europe
For the U.K.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
4
CONTENTS
Product Introduction .................................................................................................6
Projector Features.............................................................................................6
Package Contents.............................................................................................7
Getting to Know the Projector...................................................................................8
Projector Components.......................................................................................8
Remote Control Components..........................................................................ꢀꢀ
Installation ..............................................................................................................ꢀꢁ
Connecting the Projector.................................................................................ꢀꢁ
Powering On/Off the Projector ........................................................................ꢀ6
Adjusting the Projected Image ........................................................................ꢀ7
Adjusting the Projector Zoom and Focus .......................................................ꢀ8
Adjusting Projection Image Size......................................................................ꢀ8
Using the Projector.................................................................................................ꢁ0
Control Panel...................................................................................................ꢁ0
Remote Control ...............................................................................................ꢁꢀ
Menu Options.........................................................................................................ꢁ4
Image ..............................................................................................................ꢁ5
Video ...............................................................................................................ꢁ8
Display.............................................................................................................ꢁ9
Language ........................................................................................................ꢂ0
Advanced ........................................................................................................ꢂꢀ
Audio...............................................................................................................ꢂꢁ
Maintenance...........................................................................................................ꢂꢂ
Cleaning the Lens ...........................................................................................ꢂꢂ
Cleaning the Projector Housing.......................................................................ꢂꢂ
Replacing the Lamp ........................................................................................ꢂ4
Technical Specifications .........................................................................................ꢂ6
Appendix.................................................................................................................ꢂ7
Indicator Messages.........................................................................................ꢂ7
Preset Signals.................................................................................................ꢂ8
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Product Introduction
Projector Features
The projector integrates high-performance optical engin e projection and a user-
friendly design to deliver high reliability and ease of use.
The projector offers the following features:
Single chip 0.55” Texas Instruments DLP™ technology
XGA (ꢀ0ꢁ4 x 768 pixels)
Compact size, light weight for portability
1.2x manual zoom lens
Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling
compression compatibility for VGA, SVGA, XGA and SXGA*.
State-of-the-art motion adaptive hardware deinterlacing with 3:2 pull down
ꢁ00-watt, user-replaceable lamp
Compatibility with Macintosh® computers
Compatibility with NTSC, PAL, SECAM, and HDTV
Multi-function remote control
D-Sub 15-pin cable for analog video connectivity
User-friendly, multi-language on-screen display (OSD)
Advanced electronic keystone correction
* means compressed.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Package Contents
When you unpack the projector, make sure you have all these components:
Projector with Lens Cap
AC Power Cord
VGA Cable (D-SUB to D-SUB)
Composite Video Cable
S-Video Cable
Audio Cable
POWER
AUTO
SOURCE
MENU
ENTER
BLANK
LASER
VOLUME
4:3/16:9 KEYSTONE
MUTE
Battery for
Remote
Control
Projector
Soft Case
Quick Start Guide
Remote Control (IR)
Optional Accessory:
VGA (D-SUB) to
HDTV (RCA) Cable
Wizard CD
Save the original shipping carton and packing material; they will come in
handy if you ever to ship your unit. For maximum protection, repack your
unit as it was originally packed at the factory.
NOTE
Accessories and components may vary by retailer and region.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Getting to Know the Projector
Projector Components
Front View
7
8
4
6
5
ꢀ0
9
ꢁ
ꢀ
ꢂ
ꢀ. Lens cap
6. Focus ring
7. Control panel
8. Speaker
ꢁ. Lens cap strap
ꢂ. Lens
4. Ventilation holes (intake)
5. Zoom ring
9. Front IR remote control sensor
ꢀ0. Ventilation holes (exhaust)
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Rear View
ꢀ. Interface connector
ꢁ. Rear IR remote control sensor
3. Security lock receptacle
4. AC power socket
5. Ventilation holes (intake)
6. Foot adjuster
7. Foot adjuster button
ꢁ
ꢀ
ꢂ
7
6
4
5
6
7
Bottom View
ꢀ. Lamp cover
ꢀ
ViewSonic PJ458D
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
LED
1. POWER (Power LED indicator)
ꢁ. LAMP (Lamp LED indicator)
ꢀ
ꢀ
ꢁ
ꢁ
ꢂ
Button
ꢀ.
4
5
ꢁ. MENU\ENTER
3. KEYSTONE (/)
4. AUTO ()
5. Four direction buttons
6. SOURCE ( )
6
Interface Connector
SERVICE
4
ꢀ
ꢁ
ꢂ
5
ꢀ. Service connector
This connector is used for engineering purpose.
2. AUDIO input connector
Connect an audio output from video equipment to this jack.
3. COMPUTER IN (D-SUB) connector
Connect image input signal (analog) to this connector.
4. S-VIDEO connector
Connect S-Video output from video equipment to this jack.
5. VIDEO connector
Connect composite video output from video equipment to this jack.
ViewSonic PJ458D
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Components
ꢀ.
Power button
ꢁ. Four direction buttons
ꢂ. Menu button
ꢀ
7
POWER
AUTO
MENU
SOURCE
ꢀꢀ
ꢁ
4. Enter button
5. Keystone / buttons
6. Volume / buttons
7. Source button
8. Mute button
ꢂ
4
9
ꢀ0
5
ENTER
BLANK
LASER
9. Blank button
6
10. 4:3/16:9 button
ꢀꢀ. Auto button
VOLUME
4:3/16:9 KEYSTONE
MUTE
8
ViewSonic PJ458D
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the Projector
A. Connecting to a computer
ꢀ
ꢁ
AC Power Cord
VGA Cable (D-SUB to D-SUB)
ꢀ
Desktop type
Laptop type
ꢁ
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁ
B. Connecting to a Video Source
1.Connecting with S-Video Cable
ꢀ
ꢁ
ꢂ
AC Power Cord
S-Video Cable
Audio Cable
ꢀ
ꢂ
ꢁ
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢂ
2.Connecting with Composite Video Cable
ꢀ
ꢁ
ꢂ
AC Power Cord
Composite Video Cable
Audio Cable
ꢀ
ꢂ
ꢁ
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ4
3.Connecting with HDTV Cable
ꢀ
ꢁ
ꢂ
AC Power Cord
D-SUB to HDTV Cable
Audio Cable
ꢀ
ꢂ
ꢁ
When connecting cable, power cords of both a projector and external
equipment should be disconnected from AC outlet.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ5
Powering On/Off the Projector
Powering On the Projector:
ꢀ. Remove the projector lens cap.
2. Complete the AC power cord and peripheral signal cable(s) connections.
ꢂ. Press the
button on the Projector Control Panel or the
Power button on
the Remote Control to turn on the power.
4. Turn on your source (computer, notebook, DVD, etc.). The projector
automatically detects your source.
If the “Searching for source” message appears on the screen, ensure that
the appropriate signal cable(s) are securely connected.
If you are connecting multiple sources to the projector simultaneously, press
the SOURCE button on the Projector Control Panel or the Source button on
the Remote Control to select the desired source.
Warning:
Never look into the lens when the lamp is on. This can damage your eyes. It
is especially important that children are not allowed to look into the lens.
Powering Off the Projector:
ꢀ. Press the
button on the Projector Control Panel or the
Power button on
the Remote Control. A message will appear on the screen:
ꢁ. Press the
button on the Projector Control Panel or the
Power button
on the Remote Control again to turn off the power. Wait until the lamp LED
indicator turns off.
Please wait until the fan motor and the lamp LED turn off before removing
the AC power cord from the projector.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ6
Adjusting the Projected Image
Adjusting the Projector Height
To raise the projector:
ꢀ. Lift up the rear side of the projector, and press the foot adjuster buttons on the
two sides.
2. Raise the projector to the desired display height, and then release the buttons
to lock the foot adjusters into position.
To lower the projector:
ꢀ. Lift up the rear side of the projector, and press the foot adjuster buttons on the
two sides.
2. Lower the projector, and then release the buttons to lock the foot adjusters into
position.
You may turn the foot adjuster to make fine adjustment of the height.
To avoid damaging the projector, make sure that the foot adjuster is
fully retracted before placing the projector in its carrying case.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ7
Adjusting the Projector Zoom and Focus
Focus Ring
Zoom Ring
1. Adjust the image size by rotating the zoom ring.
Rotate to the right to reduce the image.
Rotate to the left to enlarge the image.
2. Focus the image by rotating the focus ring.
A still image is recommended for focusing.
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection
distance.
Distance between the screen
and the center of the lens
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ8
Projection 4 : 3 Screen Size –Diagonal
16 : 9 Screen Size-Diagonal
Distance
(m)
(inch)
(inch)
Wide
ꢂꢂ.0
Tele
ꢁ7.5
Wide
ꢂ0.ꢁ
Tele
ꢁ5.ꢁ
ꢀ.ꢁ
ꢀ.5
ꢁ
4ꢀ.ꢁ
ꢂ4.ꢂ
ꢂ7.8
ꢂꢀ.5
55.0
45.8
50.4
4ꢁ.0
ꢁ.ꢁ
ꢂ
60.5
50.4
55.5
46.ꢁ
8ꢁ.5
68.7
75.7
6ꢂ.ꢀ
4
ꢀꢀ0.0
ꢀꢂ7.5
ꢀ65.0
ꢀ9ꢁ.5
ꢁꢁ0.0
ꢁ47.5
ꢁ75.0
9ꢀ.6
ꢀ00.9
ꢀꢁ6.ꢁ
ꢀ5ꢀ.4
ꢀ76.6
ꢁ0ꢀ.9
ꢁꢁ7.ꢀ
ꢁ5ꢁ.4
84.ꢀ
5
ꢀꢀ4.5
ꢀꢂ7.5
ꢀ60.4
ꢀ8ꢂ.ꢂ
ꢁ06.ꢁ
ꢁꢁ9.ꢀ
ꢀ05.ꢀ
ꢀꢁ6.ꢁ
ꢀ47.ꢁ
ꢀ68.ꢁ
ꢀ89.ꢂ
ꢁꢀ0.ꢂ
6
7
8
9
ꢀ0
* This table is for user reference only.
Position the projector in a horizontal position; other positions can cause
heat build-up and damage to the projector.
NOTE
Make sure the heat ventilation holes are not blocked.
Do not use the projector in a smoky environment. Smoke residue may
cause buildup on critical parts (i.e. DMD, lens assembly, etc.)
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ9
Using the Projector
Control Panel
ꢀ
ꢀ
ꢁ
ꢂ
ꢁ
4
5
LED
6
1. POWER (Power LED indicator)
Refer to “Indicator Messages”.
ꢁ. LAMP (Lamp LED indicator)
Refer to “Indicator Messages”.
Button Function
ꢀ.
Refer to “Powering On/Off the Projector”.
ꢁ. MENU \ ENTER
Press the MENU\ENTER button to activate the OSD (On-Screen Display)
menu. Use the directional buttons and MENU\ENTER button to navigate
through the OSD (On-Screen Display) menu and select choices.
3. KEYSTONE (/)
Adjusts image distortion caused by tilting the projector.
4. AUTO ()
Automatically adjusts frequency and phase.
5. Four direction buttons
The four direction buttons /// can be used to scroll through OSD (On-
Screen Display) menus and make adjustments.
6. SOURCE ()
Manually selects an input source.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ0
Remote Control
ꢀ.
Power
Refer to “Powering On/Off the Projector”.
ꢁ. Four direction buttons
The four direction buttons ///
can be used to scroll through OSD
(On-Screen Display) menus and make
adjustments.
ꢀ
7
POWER
AUTO
MENU
SOURCE
ꢀꢀ
ꢁ
ꢂ
4
9
ꢀ0
5
ꢂ. Menu
ENTER
BLANK
Press the Menu button to activate the
OSD (On-Screen Display) menu. Use
the directional buttons and Menu button
to navigate through the OSD (On-Screen
Display) menu.
LASER
6
VOLUME
4:3/16:9 KEYSTONE
MUTE
8
4. Enter
Confirms the selection
5. Keystone /
Adjusts image distortion caused by
tilting the projector.
6. Volume /
Press the Volume button to increase
the volume; press the Volume button
to reduce the volume.
7. Source
Manually selects an input source.
8. Mute
Cuts off the sound temporarily.
9. Blank
Cuts off the screen temporarily.
10. 4:3/16:9
Press the 4:3/16:9 to switch the image
aspect ratio from 4:ꢂ to ꢀ6:9.
ꢀꢀ. Auto
Automatically adjusts frequency and
phase.
ViewSonic PJ458D
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Replacement
Keep the battery out of the reach of children. There is a danger of death by
accidentally swallowing the battery.
Do not recharge the used battery or expose the battery to fire or water.
Do not dispose of the used battery along with household waste. Dispose of
used batteries according to local regulations.
Avoid excessive heat and humidity. Danger of explosion may happen
if a battery is incorrectly replaced. Replace only with the same type
recommended by the manufacturer.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢁ
Remote Control Operation
Point the remote control at the infrared remote sensor and press a button.
ꢂm
ꢂm
A. Straight Distance: within about 7
meters from the
front of the remote
ꢂm
sensor.
B. Direction:
ꢂm
Angle:
within about 20 degrees
of the remote sensor in
every direction.
7m
SOURCE
O
AUT
Distance: within about ꢂ meters
from the front of the
PWER
ENU
M
LANK
B
ENTER
R
E
N
O
LASE
ST
EY
K
:9
16
3/
4:
E
M
LU
VO
MUTE
remote sensor.
The remote control may not operate when there is sunlight or other strong
light such as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is
visible.
NOTE
Do not drop the remote control or jolt it.
Keep the remote control out of locations with excessively high temperature
or humidity.
Do not get water on the remote control or place wet objects on it.
Do not disassemble the remote control.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢂ
Menu Options
The projector has multi-language OSD (On-Screen Display) menus that can only
be displayed when an input source is present. The menus can be accessed using
either the Projector Control Panel or the Remote Control.
The OSD (On-Screen Display) menus allow you to make image adjustments and
change a variety of settings. If source is a computer, the OSD (On-Screen Display)
allows changes to the Display tab. When using a video source, the OSD (On-Screen
Display) allows changes to the Video tab. The projector automatically detects the
source.
ꢀ. Press the MENU\ENTER button on the Projector Control Panel or the Menu
button on the Remote Control.
ꢁ. Select the menu tab with the / buttons either on the Projector Control Panel
or the Remote Control.
ꢂ. Select the desired menu option item with the / buttons either on the
Projector Control Panel or the Remote Control.
To enter its respective sub-menu, refer to each menu option section for more
details.
4. To exit from the menu:
On the Projector Control Panel: Go back to main menu tab with the /
buttons, and press the MENU\ENTER button.
On the Remote Control: press the Menu button.
The illustrations in this manual are for the purpose of explanation and may
NOTE
differ from the actual setting of your projector.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ4
Image
Option
Actions/Descriptions
Contrast
Controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast
changes the amount of black and white in the image.
Select the desired setting with the / buttons:
Press the button to decrease the contrast.
Press the button to increase the contrast.
Adjusts the brightness of the image.
Brightness
Keystone
Select the desired setting with the / buttons:
Press the button to darken the image.
Press the button to lighten the image.
Adjusts image distortion caused by tilting the projector.
Select the desired setting with the / buttons:
Press the button to reduce the upper width.
Press the button to reduce the lower width.
Aspect Ratio
Selects this function to fit 1:1, 16:9, 4:3 aspect ratio. In
order to use the ꢀ:ꢀ aspect ratio, the input must be a
computer signal (through VGA cable) of resolution less
than SVGA (800 x 600). If the input signal is a computer
signal greater than SVGA or component 1080i / 720p,
only ꢀ6:9 or 4:ꢂ aspect ratio will be available.
ViewSonic PJ458D
ꢁ5
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the desired setting with the / buttons:
1:1: The input source will be displayed without scaling
ꢀ6:9: The input source will be displayed in wide screen
mode (16:9) without scaling. The source will be scaled
to fit the width of the screen.
4:3: The input source will be scaled to fit the screen.
Blank Screen
Blanks the screen temporarily, and selects the screen
color when Blank Screen is active.
Select the desired setting with the / buttons:
White
Black
Blue
Gray
Red
Green
Yellow
Cyan
Magenta
Gamma
Selects Gamma Mode.
Select the desired setting with the / buttons:
Film : Dark video image mode
Photographic: Computer photo mode
RGB: Computer text mode
Video : Common video mode
White Peaking
White Peaking can be adjusted between 0 and 10.
Select the desired setting with the / buttons:
Setting 10 will maximize the brightness.
Setting 0 will maximize color reproduction quality.
Adjusts the color temperature. With the higher
ColorTemperature
temperature,
the screen looks colder; with the lower
temperature, the screen looks warmer. Red, Green
and Blue mode activate only if the
Color Temperature is set to “User”.
ViewSonic PJ458D
ꢁ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the desired setting with the / buttons:
Hi
Mid
Low
User
Red
Manually adjusts red.
Select the desired setting with the / buttons:
Press the button to decrease the color temperature.
Press the button to increase the color temperature.
Manually adjusts green.
Green
Blue
Select the desired setting with the / buttons:
Press the button to decrease the color temperature.
Press the button to increase the color temperature.
Manually adjusts blue.
Select the desired setting with the / buttons:
Press the button to decrease the color temperature.
Press the button to increase the color temperature.
ViewSonic PJ458D
ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
Option
Actions/Descriptions
Saturation
Adjustsavideoimagefromblackandwhitetofullysaturatedcolor.
Select the desired setting with the / buttons:
Press the button to decrease the amount of color in the
image.
Press the button to increase the amount of color in the
image.
Tint
Adjusts the color balance of red and green.
Select the desired setting with the / buttons:
Press the button to increase the amount of green in the
image.
Press the button to increase the amount of red in the image.
Adjusts the sharpness of the image.
Sharpness
Select the desired setting with the / buttons:
Press the button to decrease the sharpness.
Press the button to increase the sharpness.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ8
Display
Option
Phase
Actions/Descriptions
Synchronizes the signal timing of the display with that of the
graphic card. If you experience an unstable or flickering
image, use the phase function to correct it.
Select the desired setting with the / buttons:
Press the button to decrease the value.
Press the button to increase the value.
Tracking
Changes the display data frequency to match the frequency
of your computer graphic card. If you experience a vertical
flickering bar, use the tracking function to make an adjustment.
Select the desired setting with the / buttons:
Press the button to decrease the value.
Press the button to increase the value.
Adjusts the horizontal position.
H.Position
Select the desired setting with the / buttons:
Press the button to move the image left.
Press the button to move the image right.
Adjusts the vertical position.
V.Position
Select the desired setting with the / buttons:
Press the button to move the image up.
Press the button to move the image down.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ9
Language
Option
Actions/Descriptions
Language
Selects the language for menu and message displayed.
Select the language you prefer with the / buttons, and
confirm the selection with the MENU\ENTER button on the
Projector Control Panel or the Enter button on the Remote
Control.
English
Deutsch
Français
Español
Português
Italiano
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ0
Advanced
Option
Actions/Descriptions
Auto Source
Select
Automatically scans the input source.
Press the MENU\ENTER button on the Projector Control Panel or
the Enter button on the Remote Control to active this function.
The image is reversed horizontally.
Rear
Press the MENU\ENTER button on the Projector Control Panel or
the Enter button on the Remote Control to active this function.
The image is inverted vertically.
Ceiling
Press the MENU\ENTER button on the Projector Control Panel or
the Enter button on the Remote Control to active this function.
Uses this function to dim the projector lamp light output
which will lower power consumption and increase lamp life.
ECO Mode
Select the desired setting with the / buttons:
ON
OFF
Lamp Hours
Color Space
Displays operating hours since lamp timer reset. Lamp hour
counter is displayed in read-only format, and this setting
cannot be manually adjusted.
Manually selects signal type.
Select the input signal type with the / buttons:
RGB
YCbCr
YPbPr
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢀ
AutoShutdown
Uses this function to automatically turn off the lamp if the
projector does not detect an input signal for specified
time period (ꢂ0 minutes).
Select the desired setting with the / buttons:
ON
OFF
OSD Timeout
Menu Position
Factory Reset
Duration OSD (On-Screen Display) menu stays active (at
idle state by second).
Select the desired setting with the / buttons.
Selects the position of the OSD (On-Screen Display) menu
on the screen.
Select the desired setting with the / buttons.
Resets the projector to its factory default settings.
Press the MENU\ENTER button on the Projector Control Panel
or the Enter button on the Remote Control to enter its sub-
menu, select the desired setting with the / buttons, and
confirm the selection with the MENU\ENTER button on the
Projector Control Panel or the Enter button on the Remote
Control again.
Audio
Option
Actions/Descriptions
Volume
Adjusts the volume.
Select the desired setting with the / buttons:
Press the button to decrease the volume.
Press the button to increase the volume.
Cuts off the sound temporarily.
Mute
Select the desired setting with the / buttons:
ON
OFF
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢁ
Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust,
dirt or spots will project on the screen and diminish image quality. The only part
you could replace yourself is the lamp. If any other parts need replacing, contact
your dealer or qualified service personnel. When cleaning any part of the projector,
always switch off and unplug the projector first.
Warning:
Never open any of the covers on the projector except the lamp cover.
Dangerous electrical voltages inside the projector can cause severe injury.
Except as specifically indicated in this User’s Manual, do not attempt to service
this product yourself. Refer all servicing to qualified service personnel.
Cleaning the Lens
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your
hands.
Cleaning the Projector Housing
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft
cloth damped with water, or water and neutral detergent, and wipe dry with a soft,
dry cloth.
Turn off the projector and remove the AC power cord from the power outlet
before beginning maintenance work.
Make sure the lens is cool before cleaning.
NOTE
Do not use detergents or chemicals other than those noted above. Do not
use benzene or thinners.
Do not use chemical sprays.
Use a soft cloth or lens paper only.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢂ
Replacing the Lamp
Projector lamps have a finite life. Replace the lamp when:
The image becomes darker and hues become weaker after a lamp has been
for a long period of time.
The projector lamp LED indicator turns into red. Refer to section titled “Indicator
Messages” for further details.
The lamp becomes high temperature after turning off the projector with the
power button. If you touch the lamp, you may scald your finger. When you
replace the lamp, wait for at least 45 minutes for the lamp to cool down.
Do not touch the lamp glass at any time. The lamp may explode due to
improper handling, including the touching of the lamp glass.
Lamp lifetime may differ from lamp to lamp and according to the
environment of use. There is no guarantee of the same lifetime for each
lamp. Some lamps may fail or terminate their lifetime in a shorter period of
time than other similar lamps.
A lamp may explode as a result of vibration, shock or degradation as a
result of hours of use as its lifetime draws to an end. Risk of explosion may
differ according to the environment or conditions in which the projector and
lamp are being used.
Wear protective gloves and eyeglasses when fixing or detaching the lamp.
NOTE
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at
least for 5 minutes to turn off the projector after powering on.
Do not operate the lamp in proximity to paper, cloth, or other combustible
material nor cover it with such materials. Otherwise it could cause a fire.
Do not operate the lamp in an atmosphere containing an inflammable
substance, such as thinner. Otherwise it could cause a fire or explosion.
Thoroughly ventilate the area or the room when operating the lamp in
an oxygen atmosphere (in the air). If ozone is inhaled, it could cause
headaches, nausea, dizziness, etc.
The inorganic mercury is involved in the lamp. If the lamp bursts, the
mercury inside the lamp will go out of the projector. Leave the area
immediately if the lamp shatters while being operated and ventilate the
area for at least ꢂ0 minutes in order to avoid the inhalation of mercury
fumes. Otherwise it could be harmful to user’s health.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ4
1. Turn off the projector and unplug
the AC power cord.
ꢁ. Place a protective sheet (cloth)
beneath the projector. Turn the
projector over so you can access
the lamp cover.
ꢂ. Remove the access panel screws
and open the panel.
4. Remove the screws on the
bottom of the lamp assembly.
5. Grasp the lamp handle and pull
the lamp assembly directly out of
the projector.
6. Replace with the new lamp.
7. Place back the screws on the
bottom of lamp assembly.
8. Place the panel and screw back
the screws on the lamp cover.
Dispose of the used lamp according to local regulations.
Ensure that screws are tightened properly. Screws not tightened fully may
result in injury or accidents.
Since the lamp is made of glass, do not drop the unit and do not scratch
the glass.
NOTE
Do not reuse the old lamp. This could cause the lamp to explode.
Be sure to turn off the projector and unplug the AC power cord before
replacing the lamp.
Do not use the projector with the lamp cover removed.
ViewSonic PJ458D
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ5
Technical Specifications
Projection System
Native resolution
Lens
Single panel 0.55” DLP projector
786,4ꢂꢁ dot xꢀ (ꢀ0ꢁ4 x 768 xꢀ)
Manual Zoom (1.2X)
20.2 - 24.2 mm
Focal Length
Aspect Ratio
Screen Size
Lamp
ꢀ:ꢀ, ꢀ6:9, 4:ꢂ
30 – 200 inches
ꢁ00W
Projection Type
Video Input
Front, Rear, Ceiling
PAL, NTSC, SECAM
Computer, HDTV, S-Video, Video
Input Source
Scanning Frequency
Horizontal Freq.
Vertical Freq.
Pixel Rate
31 / 79 KHz
56 / 85 Hz
135 MHz
Digital Keystone Correction Vertical: +/- 15 degrees
Analog RGB (input signal) D-Sub connector
HDTV Display
720p(60 Hz), 1080i(60 Hz)
2W x 1
Integrated Speaker
Remote Control
OSD Language
Multifunctional
Multilanguage
Operational Avmvient
Temperature: +5 - +350C
Humidity: 10 - 85%
UL, CE, FCC Class B, CCC, TUV-GS,NOM,
GOST-R, MIC, PSB
AC 100 - 240 V, 50 - 60 Hz
ꢁ50 Watts
Certification
Power Supply
Power Consumption
Dimension (W x D x H)
Weight
254 x 202 x 98 mm
2.2 kg (4.9 lb)
Note: Design and Specifications are subject to change without prior notice.
ViewSonic PJ458D
ꢂ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Indicator Messages
LED Type
Color Status
Meaning
Power LED Green Flashing The projector is powered and ready.
The projector system has some problems with
Power LED Amber Solid
its fan, so the projector cannot start up.
The projector is in good condition on working.
The lamp is in good condition and is projecting
at maximum brightness.
Power LED Green Solid
Lamp LED Green Solid
The lamp has reached its end of life and must
be changed soon. The lamp will continue to
operate until it fails. Change the lamp. If the
lamp is off, then the ballast will become
malfunction.
Lamp LED Amber Solid
The projector is shutting down. The fan motor is
cooling the lamp for shutdown. Do not unplug
the power cable or turn the power switch off
before the lamp LED turns off. The fan motor will
turn off when the lamp has cooled.
Lamp LED Green Flashing
Lamp LED Amber Flashing Temperature is too high. The lamp will turn off.
ViewSonic PJ458D
ꢂ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Signals
Preset signal
fH (kHz)
31.469
37.861
37.500
43.269
fV (Hz)
59.940
72.809
75.000
85.008
56.250
60.317
72.188
75.000
85.061
60.004
70.069
75.029
84.997
70.016
75.000
85.057
60.000
75.000
60.020
Sync
Size
800
640 x 480
VGA mode 3
H(-), V(-)
H(-), V(-)
H(-), V(-)
H(-), V(-)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(-), V(-)
H(-), V(-)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
H(+), V(+)
VGA VESA 72 Hz
VGA VESA 75 Hz
VGA VESA 85 Hz
832
840
832
800 x 600
SVGA VESA 56 Hz 35.156
SVGA VESA 60 Hz 37.879
SVGA VESA 72 Hz 48.077
SVGA VESA 75 Hz 46.875
SVGA VESA 85 Hz 53.674
1024
1056
1040
1056
1048
1344
1328
1312
1376
1472
1600
1568
1800
1680
1688
1024 x 768 XGA VESA 60 Hz
XGA VESA 70 Hz
48.363
56.476
60.023
68.677
XGA VESA 75 Hz
XGA VESA 85 Hz
1152 x 864 SXGA VESA 70 Hz 63.995
SXGA VESA 75 Hz 67.500
SXGA VESA 85 Hz 77.487
1280 x 960 SXGA VESA 60 Hz 60.000
SXGA VESA 75 Hz 75.000
1280 x 1024 SXGA VESA 60 Hz 63.981
ViewSonic PJ458D
ꢂ8
Download from Www.Somanuals.com. All Manuals Search And Download.
HDTV Preset Signals
Preset Signals
480i
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
15.8 kHz
31.5 kHz
45.0 kHz
33.8 kHz
60 Hz
60 Hz
60 Hz
60 Hz
480p
720p
1080i
Note: Specifications are subject to change without notice.
ViewSonic PJ458D
ꢂ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T=Telephone
F=Fax
Country/
Region
Web Site
E-mail
T= 800 688 6688
F= 909 468 1202
United States
Canada
T= 866 463 4775
F= 909 468 5814
T= 866 323 8056
F= 909 444 5655
Latin America
(Mexico/Chile)
com/uk/Support/Calldesk.htm
United Kingdom
Europe/Middle East/
Baltic countries/
North Africa
Contact your reseller
AUS=1800 880 818
NZ=0800 008 822
Australia and New
Zealand
Singapore/Malaysia/
Thailand
T= 65 64616044
South Africa/
T= 886 2 2246 3456
F= 886 2 2249 1751
Other countries
Hong Kong
Macau
T= 852 3102 2900
T= 853 700 303
T= 080 265 9080
Korea
ViewSonic PJ458D
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
®
ViewSonic Projector
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product
proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace
the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
North and South America: Three (3) years warranty for all parts excluding the lamp, three (3) years for labor, and one (I) year
for the original lamp from the date of the first consumer purchase. Europe except Poland: Three (3) years warranty for all parts
excluding the lamp, three (3) years for labor, and ninety (90) days for the original lamp from the date of the first consumer
purchase. Poland: Two (2) years warranty for all parts excluding the lamp, two (2) years for labor, and ninety (90) days for the
original lamp from the date of the first consumer purchase. Other regions or countries: Please check with your local dealer or
local ViewSonic office for the warranty information.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only. All
accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
2.
Any product on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
a.
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure
to follow instructions supplied with the product.
b.
c.
d.
e.
f.
Repair or attempted repair by anyone not authorized by ViewSonic.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
g.
h.
Any other cause which does not relate to a product defect.
3.
4.
Any product exhibiting a condition commonly known as “image built-in” which results when a static image is displayed on
the product for an extended period of time.
Removal, installation, and set-up service charges.
How to get service:
1.
2.
For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide
your product’s serial number.
To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
3.
4.
Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty
of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1.
Damage to other property caused by any defects in the product, damaged based upon inconvenience, loss of use of the
product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships,
or other commercil loss, even if advised of the possibility of such damages.
2.
3.
Any other damages, whether incidental, consequential or otherwise.
Any claim against the customer by other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do
not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the
above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your
local ViewSonic dealer.
Warranty_Projectors Rev. 1d
4.3: Projector Warranty
1 of 1
Release Date: 03-31-05
ViewSonic PJ458D
4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|