ViewSonic Computer Monitor Q9B User Manual

Q9  
LCD Display  
Model No. : VS11455  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TCO Information  
Congratulations!  
You have just purchased a TCO’99 approved and labelled product!  
Your choice has provided you with a product developed for  
professional use. Your purchase has also contributed to reducing the  
burden on the environment and also to the further development of  
environmentally adapted electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for encouraging  
the adaptation of goods and services to the environment. With the growing manufacture and  
usage of electronic equipment throughout the world, there is a recognized concern for the  
materials and substances used by electronic products with regards to their eventual recycling  
and disposal. By proper selection of these materials and substances, the impact on the  
environment can be minimized.  
There are also other characteristics of a computer, such as energy consumption levels, that are  
important from the viewpoints of both the work (internal) and natural (external) environments.  
Electronic equipment in offices is often left running continuously, resulting in unnecessary  
consumption of large amounts of energy and additional power generation. From the standpoint  
of carbon dioxide emissions alone, it is vital to save energy.  
What does labelling involve?  
The product meets the requirements for the TCO’99 scheme which provides for international  
and environmental labelling of personal computers and/or displays. The labelling scheme was  
developed as a joint effort by the TCO (The Swedish Confederation of Professional  
Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation)  
and Statens Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: ecology, ergonomics, emission of  
electrical and magnetical fields, energy consumption and electrical safety.  
Ecological criteria impose restrictions on the presence and use of heavy metals, brominated  
and chlorinated flame retardants, and other substances. The product must be prepared for  
recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS  
registered.  
Energy requirements include a demand that the system unit and/or display, after a certain  
period of inactivity, shall reduce its power consumption to a lower level in one or more stages.  
The length of time to reactivate the system unit shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of the  
reduction of electrical and magnetical fields as well as work load and visual ergonomics.  
ViewSonic Q9  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Below you will find a brief summary of the ecological requirements met by this product. The  
complete ecological criteria document can be found at TCO Development’s website  
TCO Development  
SE-114 94 STOCKHOLM, Sweden  
Fax: +46 8 782 92 07  
Information regarding TCO’99 approved and labelled products may also be obtained at  
Ecological requirements  
Flame retardants  
Flame retardants may be present in printed wiring board laminates, cables, and housings. Their  
purpose is to prevent or, at least, delay the spread of fire. Up to 30% of the weight of the plastic  
in a computer casing can consist of flame retardant substances. Many flame retardants contain  
bromine or chlorine, and these flame retardants are chemically related to PCBs  
(polychlorinated biphenyls). Flame retardants containing bromine or chlorine and the PCBs  
are suspected of giving rise to health effects, including reproductive damage in fisheating birds  
and mammals, due to the bio-accumulative* processes when these are not disposed of in  
accordance with the strict standards for disposal.  
TCO’99 requires that plastic components weighing more than 25 grams shall not contain flame  
retardants with organically bound bromine or chlorine. Flame retardants are allowed in the  
printed wiring board laminates due to the lack of commercially available alternatives, except  
for two types of brominated flame retardants (PBB and PBDE), which are not allowed in the  
product at all.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain  
computer displays.  
TCO’99 requires that the product including batteries shall not contain any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. TCO’99 requires that the  
product including batteries shall not contain any mercury. There is, however, one exception.  
Mercury is, for the time being, permitted in the back light system of flat panel monitors as  
there is currently no commercially available alternative. TCO aims to remove this exception  
when a mercury free alternative is available.  
Lead**  
Lead can be found in picture tubes, display screens, solders and capacitors. TCO’99 requires  
that the product including batteries shall not contain any lead.  
Hexavalent chromium**  
Hexavalent chromium is sometimes used as surface treatment. TCO’99 requires that the  
product shall not contain any hexavalent chromium.  
* Bio-accumulative is defined as substances which accumulate in living organisms.  
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.  
ViewSonic Q9  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliance Information  
For U.S.A.  
This device complies with part 15 of FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy, and if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
Warning: You are cautioned that changes or modifications not expressly approved by the  
party responsible for compliance could void your authority to operate the equipment.  
For Canada  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
CE Conformity for European Countries  
The device complies with the requirements of the EEC directive 89/336/EEC as  
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to "Electromagnetic  
compatibility", and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to  
"Safety."  
Following information is only for EU-member states:  
The mark shown to the right is in compliance with the Waste Electrical and  
Electronic Equipment Directive 2002/96/EC (WEEE).  
The mark indicates the requirement NOT to dispose the equipment as unsorted  
municipal waste, but use the return and collection systems according to local law.  
ViewSonic Q9  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1. Read these instructions completely before using the equipment.  
2. Keep these instructions in a safe place.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock,  
do not expose this apparatus to rain or moisture.  
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in  
this guide for further instructions.  
7. Do not block any ventilation openings. Install the equipment in accordance with the  
manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce heat.  
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other. A grounding type  
plug has two blades and a third grounding prong. The wide blade and the third prong are  
provided for your safety. If the plug does not fit into your outlet, consult an electrician for  
replacement of the outlet.  
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the  
point where if emerges from the equipment. Be sure that the power outlet is located near  
the equipment so that it is easily accessible.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the equipment. When a cart is used, use caution  
when moving the cart/equipment combination to avoid injury from tipping  
over.  
13. Unplug this equipment when it will be unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Service is required when the unit has  
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid  
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if  
the unit does not operate normally or has been dropped.  
ViewSonic Q9  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with Directive 2002/95/EC of  
the European Parliament and the Council on restriction of the use of certain hazardous  
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply  
with the maximum concentration values issued by the European Technical Adaptation  
Committee (TAC) as shown below:  
Substance  
Lead (Pb)  
Proposed Maximum Concentration  
Actual Concentration  
< 0.1%  
0.1%  
0.1%  
0.01%  
0.1%  
0.1%  
0.1%  
Mercury (Hg)  
Cadmium (Cd)  
< 0.1%  
< 0.01%  
6+  
< 0.1%  
Hexavalent Chromium (Cr  
)
Polybrominated biphenyls (PBB)  
< 0.1%  
Polybrominated diphenyl ethers (PBDE)  
< 0.1%  
Certain components of products as stated above are exempted under the Annex of the RoHS  
Directives as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not  
specifically mentioned in the Annex of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic  
ceramic parts (e.g. piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or  
more lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium  
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by  
weight.  
ViewSonic Q9  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright Information  
Copyright © ViewSonic® Corporation, 2007. All rights reserved.  
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.  
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of  
Microsoft Corporation in the United States and other countries.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered  
trademarks of ViewSonic Corporation.  
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and  
DDC are trademarks of VESA.  
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).  
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets  
the ENERGY STAR® guidelines for energy efficiency.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or  
omissions contained herein; nor for incidental or consequential damages resulting from  
furnishing this material, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right  
to change product specifications without notice. Information in this document may change  
without notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any  
purpose without prior written permission from ViewSonic Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes  
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic  
Wizard CD-ROM also provides an opportunity for you to print the registration form, which  
you may mail or fax to ViewSonic.  
For Your Records  
Product Name:  
Q9  
ViewSonic 19” LCD Display  
VS11455  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
Q9-3_UG_ENG Rev. 1C 03-23-07  
___________________________  
___________________________  
Product disposal at end of product life  
The lamp in this product contains mercury. Please dispose of in accordance with local, state or  
federal laws.  
ViewSonic is concerned about the preservation of our environment. Please dispose of this  
product properly at the end of its useful life. For the recycling information, please refer to our  
website:  
3. Taiwan: recycle.epa.gov.tw  
ViewSonic Q9  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Congratulations on your purchase of a ViewSonic® LCD display.  
Important! Save the original box and all packing material for future shipping needs.  
NOTE: The word “Windows” in this user guide refers to the following Microsoft operating  
systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000, Windows Me  
(Millennium), and Windows XP.  
Package Contents  
Your LCD display package includes:  
• LCD display  
• Power cord  
• Wizard CD-ROM  
• Quick Start Guide  
NOTE: The CD includes the User Guide PDF files and INF/ICM display optimization files.  
The INF file ensures compatibility with Windows operating systems, and the ICM file (Image  
Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install  
both the INF and ICM files.  
Precautions  
• Sit at least 18” from the LCD display.  
• Place the LCD display in a well ventilated  
area. Do not place anything on the LCD  
display that prevents heat dissipation.  
Avoid touching the screen. Skin oils are  
difficult to remove.  
• Ensure the area around the LCD display is  
clean and free of moisture.  
Never remove the rear cover. This LCD  
display contains high-voltage parts. You  
may be seriously injured if you touch  
them.  
• Do not place heavy objects on the LCD  
display, video cable, or power cord.  
• Avoid exposing the LCD display to direct  
sunlight or another heat source. Orient the  
LCD display away from direct sunlight to  
reduce glare.  
• If smoke, an abnormal noise, or a strange  
odor is present, immediately switch the  
LCD display off and call your dealer or  
ViewSonic. It is dangerous to continue  
using the LCD display.  
• Always handle the LCD display with care  
when moving it.  
• Do not rub or apply pressure to the LCD  
panel, as it may permanently damage the  
screen.  
ViewSonic Q9  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Installation  
1. Connect power cord (and AC/DC  
adapter if required)  
• Wait for the CD-ROM to auto-start.  
NOTE: If the CD-ROM does not auto-  
start: double-click on the CD-ROM icon in  
the Windows Explorer, then double-click  
on viewsonic.exe.  
2. Connect video cable  
• Make sure both the LCD display and  
computer are turned OFF  
• Follow the on-screen instructions.  
• Remove rear panel covers if necessary  
5. Windows users: Set the timing mode  
(resolution and refresh rate)  
• Connect the video cable from the LCD  
display to the computer  
Example: 1280 x 1024 @ 60 Hz.  
Macintosh users: Models older than G3  
require a Macintosh adapter. Attach the  
adapter to the computer and plug the video  
For instructions on changing the resolution  
and refresh rate, see the graphics card’s  
user guide.  
cable into the adapter.  
To order a ViewSonic® Macintosh adapter,  
contact ViewSonic Customer Support.  
Installation is complete. Enjoy your new  
ViewSonic LCD display.  
To be best prepared for any future  
customer service needs: print this user  
guide and write the serial number in “For  
Your Records” on page 4. (See back of  
LCD display.)  
3. Turn ON LCD display and computer  
Turn ON the LCD display, then turn ON  
the computer. This sequence (LCD display  
before computer) is important.  
You can register your product online at the  
ViewSonic website for your region. See  
the Customer Support table in this guide.  
NOTE: Windows users may receive a  
message asking them to install the INF  
file. This is on the CD.  
The ViewSonic Wizard CD-ROM also  
provides an opportunity for you to print  
the registration form which you may mail  
or fax to ViewSonic.  
4. Insert the ViewSonic Wizard CD into  
the computer’s CD drive.  
Follow the on-screen instructions. If your  
computer does not have a CD-ROM drive,  
please refer to Customer Support page.  
Audio Cable  
AC IN  
SIGNAL  
Power Code  
AC Outlet  
(Wall Socket)  
Computer Power Cord  
ViewSonic Q9  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wall Mounting (Optional)  
To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the  
instructions that come with the base mounting kit. To convert your LCD display from a desk-  
mounted to a wall-mounted display, do the following:  
1. Verify that the Power button is turned Off, then  
Four VESA screw holes  
disconnect the power cord.  
2. Lay the LCD display face down on a towel or  
blanket.  
3. Remove the Plastic Covers from the back of the  
LCD display.  
4. Remove the four screws attaching the base.  
5. Remove the Rubber Plugs from inside the four  
VESA screw holes.  
6. Attach the mounting bracket from the VESA  
compatible wall mounting kit (100 mm x 100 mm  
distance).  
7. Attach the LCD display to the wall, following the  
instructions in the wall-mounting kit.  
ViewSonic Q9  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the LCD Display  
Setting the Timing Mode  
Setting the timing mode is important for maximizing the quality of the screen image and  
minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and  
refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the  
OSD (On-screen Display) controls to adjust the screen image.  
For the best picture quality set your LCD display timing mode to:  
VESA 1280 x 1024 @ 60Hz.  
To set the Timing Mode:  
1. Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the  
resolution.  
2. Set the refresh rate: See your graphic card's user guide for instructions.  
WARNING: Do not set the graphics card in your computer to exceed the maximum refresh  
rate of 85Hz; doing so may result in permanent damage to your LCD display.  
OSD and Power Lock Settings  
OSD Lock: Press and hold [1] and the up arrow S for 10 seconds. If any buttons are  
pressed the message OSD Locked will display for 5 seconds.  
OSD Unlock: Press and hold [1] and the up arrow S again for 10 seconds.  
Power Button Lock: Press and hold [1] and the down arrow T for 10 seconds. If the  
power button is pressed the message Power Button Locked will display for 5 seconds. With  
or without this setting, after a power failure, your LCD display’s power will automatically  
turn ON when power is restored.  
Power Button Unlock: Press and hold [1] and the down arrow T again for 10 seconds.  
ViewSonic Q9  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Screen Image  
Use the buttons on the front control panel to display and adjust the OSD controls which display  
on the screen. The OSD controls are explained at the top of the next page and are defined in  
“Main Menu Controls” on page 11.  
Main Menu  
with OSD controls  
Front Control Panel  
shown below in detail  
Scrolls through menu options and adjusts the  
displayed control.  
Also a shortcut to display the Contrast adjustment  
control screen.  
Displays the Main  
Menu or exits the  
control screen and  
saves adjustments.  
Displays the control screen for the  
highlighted control.  
Also toggles between two controls on  
some screens.  
Also a shortcut to Auto Image Adjust.  
Power light  
Green = ON  
Orange = Power Saving  
Standby Power  
On/Off  
ViewSonic Q9  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do the following to adjust the display setting:  
1. To display the Main Menu, press button [1].  
NOTE: All OSD menus and adjustment screens disappear automatically after about 30  
seconds. This is adjustable through the OSD timeout setting in the setup menu.  
2. To select a control to adjust, pressSorTto scroll up or down in the Main Menu.  
3. After the desired control is selected, press button [2]. A control screen like the one shown  
below appears.  
The line at the bottom of the screen  
shows the current functions of buttons 1  
and 2: Exit or select the Brightness  
control.  
4. To adjust the setting, press the upSor downTbuttons.  
5. To save the adjustments and exit the menu, press button [1] twice.  
The following tips may help you optimize your display:  
• Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to  
the LCD display. (Look for instructions on “changing the refresh rate” in the graphics card's  
user guide.)  
• If necessary, make small adjustments using H. POSITION and V. POSITION until the  
screen image is completely visible. (The black border around the edge of the screen should  
barely touch the illuminated “active area” of the LCD display.)  
ViewSonic Q9  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Menu Controls  
Adjust the menu items shown below by using the upSand downTbuttons.  
Control Explanation  
Auto Image Adjust automatically sizes, centers, and fine tunes the video signal  
to eliminate waviness and distortion. Press the [2] button to obtain a sharper  
image.  
NOTE: Auto Image Adjust works with most common video cards. If this  
function does not work on your LCD display, then lower the video refresh rate  
to 60 Hz and set the resolution to its pre-set value.  
Contrast adjusts the difference between the image background (black level)  
and the foreground (white level).  
Brightness adjusts background black level of the screen image.  
Color Adjust provides several color adjustment modes, including preset color  
temperatures and a User Color mode which allows independent adjustment of  
red (R), green (G), and blue (B). The factory setting for this product is 6500K  
(6500 Kelvin).  
sRGB-This is quickly becoming the industry standard for color management,  
with support being included in many of the latest applications. Enabling this  
setting allows the LCD display to more accurately display colors the way they  
were originally intended. Enabling the sRGB setting will cause the Contrast and  
Brightness adjustments to be disabled.  
9300K-Adds blue to the screen image for cooler white (used in most office  
settings with fluorescent lighting).  
6500K-Adds red to the screen image for warmer white and richer red.  
5400K-Adds green to the screen image for a darker color.  
ViewSonic Q9  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Explanation  
User Color Individual adjustments for red (R), green (G), and blue (B).  
1. To select color (R, G or B) press button [2].  
2. To adjust selected color, pressSorT.  
Important: If you select RECALL from the Main Menu when the product is set  
to a Preset Timing Mode, colors return to the 6500K factory preset.  
Information displays the timing mode (video signal input) coming from the  
graphics card in the computer, the LCD model number, the serial number, and  
the ViewSonic® website URL. See your graphics card’s user guide for  
instructions on changing the resolution and refresh rate (vertical frequency).  
NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution  
is 1280 x 1024 and the refresh rate is 60 Hertz.  
Manual Image Adjust displays the Manual Image Adjust menu.  
The Manual Image Adjust controls are explained below:  
H. Size (Horizontal Size) adjusts the width of the screen image.  
H./V. Position (Horizontal/Vertical Position) moves the screen image left or  
right and up or down.  
Fine Tune sharpens the focus by aligning the text and/or graphics with pixel  
boundaries.  
Sharpness adjusts the clarity and focus of the screen image.  
ViewSonic Q9  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Explanation  
Setup Menu displays the menu shown below:  
The Setup Menu controls are explained below:  
Language Select allows the user to choose the language used in the menus and  
control screens.  
Resolution Notice advises the optimal resolution to use.  
OSD Position allows the user to move the OSD menus and control screens.  
OSD Timeout sets the length of time the OSD screen is displayed. For example,  
with a “15 second” setting, if a control is not pushed within 15 seconds, the  
display screen disappears.  
Memory Recall returns the adjustments back to factory settings if the display is  
operating in a factory Preset Timing Mode listed in the Specifications of this  
manual.  
Exception: This control does not affect changes made with the User Color  
control, Language or Power Lock setting.  
Audio Adjust  
Volume increases the volume, decreases the volume, and mutes the audio.  
Mute temporarily silences audio output.  
ViewSonic Q9  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Specifications  
LCD  
Type  
19” (full 19" viewable diagonal area),  
TFT (Thin Film Transistor), Active Matrix SXGA LCD,  
0.294 mm pixel pitch  
Color Filter  
RGB vertical stripe  
Glass Surface  
Anti-Glare  
Input Signal  
Video  
Sync  
RGB analog (0.7/1.0 Vp-p, 75 ohms)  
Separate Sync  
f :30-82 kHz, f :50-75 Hz  
h
v
Compatibility  
Resolution  
PC  
Up to 1280 x 1024 Non-interlaced  
Power Macintosh up to 1280 x 1024  
1
Macintosh  
Recommended  
and supported  
1280 x 1024 @ 60, 75 Hz  
1024 x 768 @ 60, 70, 75 Hz  
832 x 624 @ 75 Hz  
800 x 600 @ 56, 60, 72, 75 Hz  
640 x 480 @ 60, 67, 75 Hz  
720 x 400 @ 70 Hz  
Power  
Voltage  
100-240 VAC, 50/60 Hz (auto switch)  
Display area  
Full Scan  
376.3 mm (H) x 301.1 mm (V)  
14.8" (H) x 11.9" (V)  
Operating  
conditions  
Temperature  
Humidity  
32° F to + 104° F (0° C to + 40° C)  
10% to 90% (non-condensing)  
To 10,000 feet  
Altitude  
Storage  
Temperature  
Humidity  
-4° F to + 140° F (-20° C to + 60° C)  
10% to 90% (non-condensing)  
To 40,000 feet  
conditions  
Altitude  
Dimensions  
Physical  
407 mm (W) x 414 mm (H) x 200 mm (D)  
16" (W) x 16.3" (H) x 7.9" (D)  
Weight  
Net  
12.2 lb (5.55 kg)  
Regulations  
CB, BSMI, CCC, PSB, C-Tick, CE, GS, ICES,  
Ergo, Gost-R/Hygienic, SASO, TCO'99,  
®
UL/cUL, FCC-B, ICES-B, NOM, TUV-S, ENERGY STAR  
Power saving  
modes  
On  
Off  
Normal  
<1W  
®
(green LED)  
(orange LED)  
Preset Timing Mode (pre-adjusted to VESA 1280 x 1024 @ 60 Hz)  
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in  
permanent damage to the LCD display.  
1
®
Macintosh computers older than G3 require a ViewSonic Macintosh adapter. To order an adapter, contact  
ViewSonic.  
ViewSonic Q9  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
No power  
• Make sure power button (or switch) is ON.  
• Make sure A/C power cord is securely connected to the LCD display.  
• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is  
supplying proper voltage.  
Power is ON but no screen image  
• Make sure the video cable supplied with the LCD display is tightly secured to the video  
output port on the back of the computer. If the other end of the video cable is not attached  
permanently to the LCD display, tightly secure it to the LCD display.  
• Adjust brightness and contrast.  
• If you are using an Macintosh older than G3, you need a Macintosh adapter.  
Wrong or abnormal colors  
• If any colors (red, green, or blue) are missing, check the video cable to make sure it is  
securely connected. Loose or broken pins in the cable connector could cause an improper  
connection.  
• Connect the LCD display to another computer.  
• If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.  
Control buttons do not work  
• Press only one button at a time.  
ViewSonic Q9  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
NOTE: You will need the product serial number.  
T = Telephone  
F = FAX  
Country/Region  
United States  
Canada  
Website  
Email  
T= 800 688 6688  
F= 909 468 1202  
T= 866 463 4775  
F= 909 468 5814  
T= 866 323 8056  
F= 909 444 5655  
Latin America  
(Mexico/Chile)  
uk/Support/Calldesk.htm  
United Kingdom  
Europe, Middle East,  
Baltic countries, and www.viewsoniceurope.com  
North Africa  
Contact your reseller  
AUS= 1800 880 818  
NZ= 0800 008 822  
Singapore/Malaysia/  
Thailand  
T= 65 64616044  
South Africa and  
other countries  
T= 886 2 2246 3456  
F= 886 2 2249 1751  
India  
T= 1800 11 9999  
T= 852 3102 2900  
T= 853 700 303  
T= 080 333 2131  
Hong Kong  
Macau  
Korea  
ViewSonic Q9  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning the LCD Display  
• MAKE SURE THE LCD DISPLAY IS TURNED OFF.  
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.  
To clean the screen:  
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.  
2. If the screen still not clean, apply a small amount of non-ammonia, non-alcohol based glass  
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1. Use a soft, dry cloth.  
2. If the case still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild  
non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.  
Disclaimer  
• ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the  
LCD display screen or case. Some chemical cleaners have been reported to damage the  
screen and/or case of the LCD display.  
• ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-  
based cleaners.  
ViewSonic Q9  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
VIEWSONIC® LCD DISPLAY  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during  
the warranty period. If a product proves to be defective in material or workmanship during the warranty period,  
ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts  
may include remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic LCD displays are warranted for 1 year for all parts including the light source and 1 year for all labor  
from the date of the first consumer purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Any damage of the product due to shipment.  
d. Removal or installation of the product.  
e. Causes external to the product, such as electrical power fluctuations or failure.  
f. Use of supplies or parts not meeting ViewSonic’s specifications.  
g. Normal wear and tear.  
h. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as "image burn-in" which results when a static image is  
displayed on the product for an extended period of time.  
4. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to  
Customer Support page). You will need to provide your product's serial number.  
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c)  
your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or  
ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein including the  
implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable  
for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of  
use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with  
business relationships, or other commercial loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or  
consequential damages, so the above limitations and exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact  
ViewSonic or your local ViewSonic dealer.  
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to  
the terms and conditions of the Maintenance Guarantee Card.  
4.3: ViewSonic LCD Warranty  
LCD_LW01 Rev. 1a 06-30-06  
ViewSonic Q9  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Microcassette Recorder PR 10 User Manual
Technika Stereo System MC 121IDAB User Manual
Thermador Coffeemaker BICM24CS User Manual
Thermador Oven DM301 User Manual
Toshiba Webcam C50 A User Manual
Tripp Lite Power Supply 20KVA User Manual
Uniden Security Camera UDW 10003 User Manual
Velodyne Acoustics Home Theater System VMS 8 User Manual
ViewSonic Projector PJD6212 User Manual
VTech Model Vehicle 91 002887 006 User Manual