Victory Refrigeration Refrigerator VPT 119 NS User Manual

Refrigeration at its best  
Installation, Operation & Troubleshooting Instructions  
Pizza Table Refrigerator  
For Models: VPT-46-NS, VPT-65-NS, VPT-88-NS, VPT-119-NS  
Manual Part No.: 50842804  
Rev: 00  
Print Date: 07/20/04  
1 1 0 Wo o d c r e s t Ro a d , C h e r r y Hill, NJ 0 8 0 0 3  
Phone: (856) 428- 4200 Fax: (856) 428-7299 Website: www.victory-refrig.com  
PART OF AGA FOODSERVICE GROUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
(Continental USA Only)  
The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material and  
workmanship for which it is responsible. The Seller's obligation under this warranty shall be limited to replacing or  
repairing at Seller's option, without charge, F.O.B. Sellers factory, any part found to be defective and any labor and  
material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of one  
year from date of purchase or thirteen months from date of shipment from Seller's factory, whichever is earlier, provided  
terms of payment have been fully met. All labor shall be performed during regular working hours. Overtime premium  
charges will be at Buyer's expense.  
Proof of purchase must be supplied to Seller to validate warranty. This warranty is valid only if equipment is properly  
installed, started-up and inspected by the dealer or authorized Victory Service agent.  
Removal or alteration of the serial/data plate from any equipment shall be deemed to release Seller from all warranty  
obligations or any other obligations, expressed or implied.  
This warranty does not cover Thermostat or Defrost Timer calibration and/or adjustment, freight damage, normal  
maintenance items outlined in Owner's Manual, adjustment of door mechanisms or replacement of light bulbs, fuses  
or batteries.  
Any repairs or replacement of defective parts shall be performed by Seller's authorized service personnel. Seller shall  
not be responsible for any costs incurred if the work is performed by other than Seller's authorized service personnel.  
Reimbursement claims for part(s) or labor service costs must be made in writing. Model, cabinet serial numbers and  
installation location must be shown on the claim. A receipted bill from the servicing agency must accompany the claim,  
together with full details of the service problems, diagnosis and work performed. Victory reserves sole discretion  
whether further documentation on a claim is to be submitted.  
Seller shall not be liable for consequential damages of any kind which occur during the course of installation of  
equipment, or which result from the use or misuse by Buyer, its employees or others of the equipment supplied  
hereunder, and Buyer's sole and exclusive remedy against Seller for any breach of the foregoing warranty or otherwise  
shall be for the repair or replacement of the equipment or parts thereof affected by such breach.  
The foregoing warranty shall be valid and binding upon Seller if and only if Buyer loads, operates and maintains the  
equipment supplied hereunder in accordance with the instruction manual provided to Buyer. Seller does not guarantee  
the process of manufacture by Buyer or the quality of product to be produced by the equipment supplied hereunder  
and Seller shall not be liable for any prospective or lost product or profits of Buyer.  
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED  
WARRANTIES WHATSOEVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY  
OR OF FITNESS FOR A PARTICULAR PURPOSE.  
The foregoing shall be Seller's sole and exclusive obligation and Buyer's sole and exclusive remedy for any action,  
whether in breach of contract or negligence. In no event shall Seller be liable for a sum in excess of the purchase price  
of the item.  
You may register online at www.victory-refrig.com, fax this completed page to (856) 428-7299, or copy and mail form below to Victory.  
*NOTE: The following mail-in form or online registration must be filled out and forwarded to Victory by the installer or customer within 10 days  
after start-up. Failure to do this will invalidate the warranties. Retain this information for your records.  
Cabinet Model No.______________________  
110 WOODCREST ROAD  
CHERRY HILL, NJ 08003-3648  
Cabinet Serial No._________________  
TEL: (856) 428-4200  
FAX: (856) 428-7299  
(Data plate information located inside cooler on  
the upper left wall)  
WARRANTIES NOT VALID UNLESS REGISTERED AT  
FACTORY WITHIN 10 DAYS AFTER START-UP DATE.  
ORIGINAL DATE OF INSTALLATION __________________________________________________________________  
INSTALLATION COMPANY NAME ____________________________________________________________________  
STREET_______________________________ CITY_____________________ STATE______ ZIP CODE___________  
DISTRIBUTOR’S NAME_____________________________________________________________________________  
STREET_______________________________ CITY_____________________ STATE______ ZIP CODE___________  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION INSTRUCTIONS  
Proper installation is the first step to operation. We recommend that your Pizza Table Refrigerator be installed  
by an authorized Victory Certified Installer.  
Receiving Shipment  
All units are performance tested and thoroughly inspected prior to shipment. Upon leaving the factory, all units are in  
perfect condition. Upon receipt, examine the exterior of the shipment packaging for any signs of rough handling. If the  
cabinet is damaged, it should be noted on the delivery slip or bill of lading and signed. A claim must be filed immediately  
against the carrier indicating the extent and estimated cost of damage incurred.  
Uncrating  
Refer to “VPT Uncrating & Caster Installation Instructions”  
Locating Your New Pizza Table Refrigerator  
Consider the following when selecting a location cabinet:  
1. Clearance - (a) Pizza Table Refrigerators are spaced 2” (inches) off the wall by the drain line cover. There are no  
spacing requirements for the sides of the unit. (b) Pizza Table lids must have at least 1” (inch) clearance when fully  
opened to avoid any damage when or if the unit is under any type of covering.  
2. Floor Load - The floor on which the cabinet will rest must be free of vibration and suitably strong enough to support  
the combined weights of the cabinet plus the maximum product load.  
3. Ventilation - The air cooled, self-contained refrigeration system requires a sufficient amount of cool, clean air. Avoid  
placing the refrigerator cabinet near heat generating equipment such as ovens, ranges, heaters, fryers, steam kettles,  
etc., and out of direct sunlight. Avoid locating the self-contained refrigerator cabinet in an unheated room, or where  
the room temperature may be below 65°F.  
4. Ambient Temperature - Pizza Table Refrigerators are approved for operation under NSF-7 standard which is for  
operation in +86°F room temperature.  
Installing Casters  
Refer to “VPT Uncrating & Caster Installation Instructions”  
Leveling  
Refer to “VPT Uncrating & Caster Installation Instructions”  
Cabinet Cleaning  
Prior to placing your new Pizza Table Refrigerator and all shelves, pan dividers and food storage pans into operation, it is  
advisable that the interior be washed thoroughly with a mild detergent and water solution. Rinse with clear water and a  
sanitizing solution. Allow cabinet to air dry.  
Installing Shelves  
All cabinets with shelves are supplied with pilasters and shelf clip supports. Shelves are easily installed by inserting the  
shelf support clips into the pilasters so they fit tightly. Align the shelf so the smaller fill wires run from front to rear and rest  
the shelf on the clips.  
Electric Supply  
Wiring should be done by a qualified electrician in accordance with local electrical codes. A separate ground wire must  
be supplied for all installations. A properly wired refrigerator will assure proper operation. Electrical supply requirements  
are on the cabinet serial/data plate located on the upper left interior tank wall inside the cabinet. It is recommended that a  
direct, properly protected line of the proper size wire be installed from the main supply to your refrigerator. To assure  
that the correct voltage is being supplied, while the refrigerator is in operation take a voltage reading at the motor-  
compressor electrical connections, or as close to the motor-compressor as possible.  
All refrigerator electrical systems are internally grounded.  
Power Cord & Switch  
The power cord for the Pizza Table Refrigerator is shipped inside the refrigeration compartment.  
1. Remove the rear refrigeration cover. (See Figure 1)  
2. Remove the two 1/4” hex head shipping bolts at the rear of the condensing unit base. With these shipping  
bolts removed, the condensing unit is serviceable from the front of the Pizza Table Refrigerator. (See Figure 2)  
3. Feed the power cord plug thru the round opening and reinstall the rear refrigeration cover to provide power to the  
Pizza Table Refrigerator.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Remove the front refrigeration cover. A power switch is located in the front upper left corner of the refrigeration  
compartment.  
5. Move the power switch to the “ON” position.  
*Note: The power switch located in the front of the refrigeration compartment must be in the “ON” position for the Pizza  
Table Refrigerator to operate.  
Figure 1  
Figure 2  
Temperature Controls  
Temperature Controls for the pizza table refrigerator storage and pan rail areas are set at the factory to maintain NSF  
Standard 7 holding temperature. The temperature controls are located behind the front grill and should only be adjusted  
by a qualified technician.  
Refrigerated Pan Rail & Night Switch  
The refrigerated pan rail is a “Food Holding” area only and is not approved for  
storage of food. It is recommended that at the close of each work day, the food in  
the pan rail be removed and stored in a refrigerator.  
A night switch has been provided to turn off the pan rail when not in use and is  
located on the front grill. This will help save energy and make cleaning easy.  
The pan rail is “ON” when the night switch inside the refrigerated pan rail label  
displays a green light. “OFF” position is indicated when the night switch is not  
displaying a green light. See “Refrigerated Pan Rail Label”.  
“Refrigerated Pan Rail Label”  
Installing Replacement Door Gasket (if required)  
Removing  
Beginning at one corner, pry gasket loose from the retaining strip. Peel remainder of gasket from the door and discard.  
Replacing  
Before replacing, be sure the gasket and door are at room temperature. (If necessary, soak the gasket in warm water to  
make it more pliable.) Align new gasket frame on the door retainer strip. Starting at one corner, press each corner of  
the gasket into the retainer strip. Once started, the gasket can be easily inserted around the entire perimeter of the door  
by simply press rolling into place.  
Installation Checklist  
After the cabinet has been installed, leveled and cleaned as described, refer to the following checklist prior to start-up.  
Check for proper electrical hook-up.  
Check exposed refrigeration line connections for leaks. Make sure refrigeration lines are not dented, kinked or rubbing.  
Check condenser fan for freedom to rotate without striking any stationary members.  
Check that cabinet is level.  
Check to see if back of cabinet has the required 2” (inch) minimum clearance from the wall or any flat surface.  
Product Load  
After the Pizza Table Refrigerator has been started and reaches the proper storage temperatures, food may be loaded.  
For optimum energy efficiency, we recommend allowing a 1-1/2” clearance between the interior cabinet wall and product  
load.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERIODIC MAINTENANCE  
Cabinet Cleaning  
Victory Refrigeration recommends periodic internal and exterior cleaning as outlined below.  
Daily Exterior Cleaning  
1. Clean surface with a sponge and cleaning solution. Use a non-abrasive cleaner that does not contain chlorine.  
2. Polish with a soft cloth, wiping with the grain of the metal.  
3. Once a week wipe with a film cutting agent to maintain shine.  
Weekly Interior Cleaning  
1. Remove all food, food related items and shelves.  
2. Discontinue power to refrigeration system by turning temperature control switch (or dial knob) all the way to the  
right.  
3. Remove loose food particles from interior floors, walls and ceiling.  
4. Scrub all interior surfaces with warm detergent solution 100°F - 120°F (38°C - 39°C) and a nylon bristled brush.  
5. Rinse with clear water and allow to air dry.  
6. Reinstall shelves.  
7. Restore power to refrigeration system by turning temperature control switch (or dial knob) to the right.  
8. Return food to cabinet when temperature indicator reaches safety zone.  
Condenser Maintenance  
To keep your cabinet running efficiently, it is recommended that you clean the condenser once every three months.  
However, once a month is recommended if the unit is located near cooking equipment which produces grease laden  
vapors, i.e. fryers, grills, steam kettles, etc.  
The refrigeration condensing unit is accessible from the front of the Pizza Table Refrigerator. (See Figure 3)  
Caution: At installation two shipping screws must be removed from the rear of the condensing unit to allow service from  
the front of the unit. (Refer to Figure 2)  
1. Remove the front refrigeration cover (grill), by removing all screws. Be careful of the Night Switch when removing.  
2. Remove power from the Pizza Table Refrigerator by moving the power switch to the “OFF” position.  
3. Remove the air baffle located above the condenser.  
4. Remove the two screws at the front of the condensing units base.  
5. Slide the condensing unit forward to clean.  
Caution: The suction line coil will expand to allow the unit to slide forward. Observe the suction line coil as the unit slides  
forward to ensure no interference is encountered.  
6. Reverse the steps for installation and restart of the Pizza Table.  
Figure 3  
WARNING: Failure to keep condenser clean may cause premature failure of motor-compressor which will NOT  
be covered by warranty.  
Lubrication  
Unless otherwise specified, all Victory refrigerators are equipped with oilless type motors. The motor-compressor is a  
sealed unit and is constantly lubricated when in operation. The condenser and the evaporator motors are equipped with  
lifetime oiled bearings which never need to be oiled.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE CALLING SERVICE GUIDE FOR COMMON PROBLEMS  
Caution: Disconnect Power Supply Prior to Attempting Any Service!  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPLACEMENT PARTS  
VPT Pizza Tables  
Part No.  
Description  
VPT- 46 VPT-65 VPT-88 VPT-119  
Refrigeration Components  
10797224 Condenser Unit w/ Fan Assembly, RH or LH (Complete)  
10797215 Condenser Unit w/ Fan Assembly, RH or LH (Complete)  
10797232 Condenser Unit w/ Fan Assembly, RH (Complete)  
10797226 Condenser Unit w/ Fan Assembly, LH (Complete)  
10797221 Condenser Unit w/ Fan Assembly, RH (Complete)  
10797211 Condenser Unit w/ Fan Assembly, LH (Complete)  
50855901 Compressor, 1/4 H.P. R134a  
50762901 Compressor, 1/3+ H.P. R134a  
50848201 Compressor, 1/3 H.P. R134a  
50831201 Compressor, 1/2+ H.P. R134a  
X
X
X
X
X
X
X
X
X
X
50686503 Filter Drier, 1/4” ODF  
X
X
X
X
50878402 Expansion Valve  
X
X
X
X
50757404 Coil, Condenser  
50829801 Coil, Condenser  
X
X
X
X
X
X
50193101 Fan Motor, Condenser  
50618602 Blade, Condenser Fan  
04458311 Bracket, Condenser Fan Motor  
04458301 Bracket, Condenser Fan Motor  
04458212 Fan Cover, Condenser  
04458201 Fan Cover, Condenser  
04458411 Top Fan Cover, Condenser  
04458401 Top Fan Cover, Condenser  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10796919 Coil Assembly, Evaporator R134a (RH or LH)  
10796904 Coil Assembly, Evaporator R134a (RH)  
10796916 Coil Assembly, Evaporator R134a (LH)  
10796921 Coil Assembly, Evaporator R134a (RH)  
10796905 Coil Assembly, Evaporator R134a (LH)  
X
X
X
X
X
X
X
50597502 Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 13”)  
50597503 Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 17”)  
50597602 Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 25”)  
X
X
X
X
X
10797304 Fan Panel Assembly, Evaporator  
10797303 Fan Panel Assembly, Evaporator  
10797302 Fan Panel Assembly, Evaporator  
10797301 Fan Panel Assembly, Evaporator  
04420301 Fan Panel (without fan, includes 1 cut-out for fan)  
04458803 Fan Panel (without fan, includes 1 cut-out for fan)  
04458802 Fan Panel (without fan, includes 2 cut-outs for fans)  
04458801 Fan Panel (without fan, includes 2 cut-outs for fans)  
04422101 Fan Panel End, Left  
X
X
X
X
X
X
X
X
X
X
X
X
X
04422103 Fan Panel End, Right  
04422109 Fan Panel End, Left  
X
X
X
04422110 Fan Panel End, Right  
50639801 Fan Motor, Evaporator  
50598001 Fan Blade, Evaporator  
X
X
X
X
X
50830503 Fan Blade, Evaporator  
50842201 Fan Guard, Plastic  
04415201 Bracket, Evaporator Fan Motor  
X
X
X
X
X
X
X
X
X
X
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
VPT Pizza Tables  
Description  
Part No.  
VPT- 46 VPT-65 VPT-88 VPT-119  
Refrigeration Components (cont’d)  
04461601 Condensate Drain Pan  
04447401 Condensate Drain Pan  
X
X
X
X
50313101 Temperature Control, Ranco (Model# 016-111)  
50686801 Solenoid Valve, 1/4 with Coil (MN# MKC120V)  
50694702 Pressure Control, Low (MN# 085CP1A-1K)  
50569502 Thermometer, Hanging Stem  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Electrical Components  
50518901 Heater Wire, Half Door Mullion  
50828201 Cord & Plug Assembly (115V/60Hz/, 15 Amps)  
50584001 Switch, Toggle  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
50619602 Switch, Rocker Green Light  
Door and Components  
10818401 Door Assembly, Left Hinged  
10818501 Door Assembly, Right Hinged  
X
X
X
X
X
X
X
50829502 Gasket, Half Door  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
50827602 Gasket Retainer Strip, Side  
50827701 Gasket Retainer Strip, Top or Bottom  
50827902 Door Pan (or Liner), Flat  
Hardware  
10685101 Hinge Assembly, Complete  
50520102 Hinge Barrel  
50520103 Hinge Base  
50520104 Hinge Shim  
50520105 Hinge Cover  
50520106 Hinge Cam  
50678801 Hinge Barrel Base Screws  
05312701 Hinge Barrel Shim  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
50648301 Caster, 3-1/2” (with Brake)  
50648302 Caster, 3-1/2” (without Brake)  
X
X
X
X
X
X
X
X
Shelves  
50597806 Shelf, Epoxy Coated Narrow End  
50597906 Shelf, Epoxy Coated Narrow Center  
50022501 Clips, Shelf  
X
X
X
X
X
X
X
X
X
X
X
03244201 Strip, Pilaster  
03254101 Pilaster & Mullion  
X
03254102 Pilaster & Mullion  
X
X
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
VPT Pizza Tables  
Part No.  
Description  
VPT- 46 VPT-65 VPT-88 VPT-119  
Cabinet, Miscellaneous  
50883201 Victory “Refrigerator” Logo  
X
X
X
X
X
X
X
X
X
50830404 Cutting Board, Standard (Dimensions: 18” x 119”)  
50830405 Cutting Board, Standard (Dimensions: 18” x 88”)  
50830406 Cutting Board, Standard (Dimensions: 18” x 65”)  
50830407 Cutting Board, Standard (Dimensions: 18” x 46”)  
50839501 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 119”)  
50839502 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 88”)  
50839503 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 65”)  
50839504 Cutting Board, Granite (Non-NSF;Dimensions: 18”x 46”)  
X
X
X
01379601 Bracket, Retainer  
50755502 Rubber Boot, Garnish Rack  
50755503 Rack, 2.25” Garnish  
X
X
X
X
X
X
X
X
X
X
X
X
05314201 Lid, Pan Rail (2 Per VPT-119)  
05314214 Lid, Pan Rail (2 Per VPT-88; 1 Per VPT-46)  
05314216 Lid, Pan Rail (1 Per VPT-65)  
50632001 Handle, Lid with Screws  
X
X
X
X
X
X
X
X
X
X
X
X
50767001 Kit, Lid Bracket with Pins  
01372801 Pan Support, Rail  
01372802 Pan Support, Rail  
01372813 Pan Support, Rail  
09351301 Divider, Pan  
X
X
X
X
X
X
X
X
X
04457801 Grill, Rear (covers back of right side refrig. system)  
04457811 Grill, Rear (covers back of right side refrig. system)  
04457812 Grill, Rear (covers back of left side refrig. system)  
04463101 Grill, Front w/ Flour Filter (covers front of refrig. system)  
04463102 Grill, Front w/o Flour Filter (covers front of refrig. system)  
04470201 Grill, Front w/o Flour Filter (covers front of refrig. system)  
04470203 Grill, Front w/ Flour Filter (covers front of refrig. system)  
10803101 Grill Assembly, Flour Filter (complete)  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10803104 Grill Assembly, Flour Filter (complete)  
X
X
X
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIRING DIAGRAM  
VPT (Self-Contained)  
115V/60Hz/1Ph  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Victory Refrigeration Inc  
110 Woodcrest Road  
Cherry Hill, NJ 08003-3648  
Tel: (856) 428-4200  
Fax: (856) 428-7299  
E-mail: service@victory-refrig.com  
or  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Computer Drive HD 15 C OTC User Manual
Technicolor Thomson MP3 Player PDP2256K User Manual
Technicolor Thomson Satellite TV System DRD302RA User Manual
Toshiba Automobile Parts TIC LF414C User Manual
Toshiba Flat Panel Television 27A46C User Manual
Tripp Lite Switch U222 007 R User Manual
Tunturi Rowing Machine R 215 User Manual
Uniden Conference Phone 1380 User Manual
Uniden Cordless Telephone TRUc46 User Manual
UTStarcom Cell Phone VM8915 User Manual