Vialta TV Receiver Beamer TV User Manual

Beamer TV (BM-TV) User’s Guide  
For the latest tips, special offers, and easy online  
Please read this User’s Guide.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Safety Precautions................................................2  
Introduction............................................................................3  
What’s Included with your Beamer TV ..................................3  
Installing your Beamer TV .....................................................4  
Installing your Beamer TV with a Single-Line Phone .......4  
Installing your Beamer TV with a Two-Line Phone ..........6  
Two-Line Phone with a Single Wall Jack .....................6  
Two-Line Phone with a Double Wall Jack ....................7  
Preparing Beamer TV’s Remote Control...............................8  
Adjusting the Camera Angle..................................................9  
Placing a Video Call with your Beamer TV............................9  
Receiving a Video Call with your Beamer TV......................12  
Locating your Beamer TV’s Features..................................13  
Using your Beamer TV’s Features ......................................15  
Start/Views Button ..........................................................15  
Snapshot Button and Privacy Feature ............................16  
Detail/Movement Buttons ...............................................18  
Line Quality Indicator ......................................................19  
Tips......................................................................................20  
Lighting ...........................................................................20  
Best Viewing Distance ....................................................20  
Use Self View to find best camera angle ........................20  
Movement .......................................................................20  
Call Waiting and Three-Way Calling ...................................21  
Compatibility........................................................................21  
Care and Maintenance........................................................22  
Troubleshooting Guide........................................................23  
Specifications ......................................................................24  
Service ................................................................................25  
Limited Warranty ............................................................26  
FCC Statement....................................................................27  
FCC Part 15 Information ................................................27  
FCC Part 68 Information ................................................27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Precautions  
Always follow these basic safety precautions when using  
your Beamer TV. This will reduce the risk of fire, electric  
shock, and injury.  
• Unplug Beamer TV from both the power  
outlet and the wall jack before performing  
care and maintenance.  
• Should any solid object or liquid fall into the  
housing, unplug Beamer TV and have it  
checked by qualified personnel before  
operating it again.  
• Do not use this product near water or when  
you are wet.  
• Slots and openings on the Beamer TV are for  
ventilation to prevent overheating. Do not  
cover them up.  
• Do not place Beamer TV near a heat source  
or in direct sunlight.  
• Do not disassemble Beamer TV. There are  
no user-serviceable parts inside.  
Disassembly of Beamer TV will void your  
warranty.  
• Only use the AC power adapter included with  
Beamer TV. Using any other power adapter  
will void your warranty.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
Congratulations! You have just purchased Beamer TV  
-
Vialta’s first Videophone Station  
that works with your own  
phone and television. You will now be able to add video,  
through your television, to the phone calls you make and  
receive from friends and family.  
Seeing your friends and family while talking to them on the  
phone is easy. Follow the easy set up, make or receive a  
call from someone with any Beamer  
product and add a  
whole new dimension to your phone calls. It's that easy!  
With Beamer TV, staying in touch is more than just a voice  
on the other end of the telephone line - it's live, full color  
video on your television at up to 15 frames per second.  
And since Beamer TV uses your regular telephone line,  
there is no additional cost to your regular phone call.  
Please take a moment to fill out the enclosed Warranty  
Card to activate your warranty. You can also register online  
What’s Included with your Beamer TV  
Everything you need to install your Beamer TV is included  
in the package:  
• (2) Standard 25-foot telephone cord (RJ-11)  
• Standard 6-foot video cable  
• Remote Control  
• AC Power Adapter  
• This User’s Guide  
• Warranty Card  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing your Beamer TV  
You can use your Beamer TV with any home phone,  
including a cordless phone or a speakerphone, for a  
hands-free experience. You’ll also need a television with a  
video input jack.  
Note: Connect the telephone line directly to your Beamer  
TV; it is not designed to be used with a PBX (Private  
Branch Exchange).  
Installing your Beamer TV with a Single-Line Phone  
1) Place your Beamer TV on top of your television.  
2) Connect one end of a supplied telephone cord to your  
nearest telephone wall jack and the other end to the  
LINE IN jack on the back of your Beamer TV.  
3) Connect one end of a supplied telephone cord to your  
phone and the other end to the PHONE IN jack on the  
back of your Beamer TV.  
4) Plug one end of the enclosed video cable into the  
VIDEO OUT jack on the back of Beamer TV and the  
other end into a Video input jack on your television.  
5) Set your television to use the correct video source.  
6) Plug the AC power adapter’s pin into the POWER IN  
jack on the back of your Beamer TV.  
7) Plug the power cord into a wall socket.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Your television will display the message “Beamer TV  
is now ready” to let you know when it is ready for you  
to place or receive a video call.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing your Beamer TV with a Two-Line Phone  
Your Beamer TV also works with a two-line phone. Be sure  
to place and receive video calls on Line 1 only. If you are  
on a video call and receive a phone call on Line 2, Beamer  
TV will let the call ring through to that line. We recommend  
that you use another phone to answer the call instead of  
putting the video call on hold. If you put your Beamer TV  
video call on hold to answer a new call on the second line,  
your video call may be disconnected.  
Two-Line Phone with a Single Wall Jack  
If you have a two-line phone that connects to a single wall  
jack, connect your Beamer TV to the wall jack and to the L1  
or L1/L2 jack on your two-line phone.  
1) Place your Beamer TV on top of your television.  
2) Connect one end of a supplied telephone cord to your  
nearest telephone wall jack and the other end to the  
LINE IN jack on the back of your Beamer TV.  
3) Connect one end of a supplied phone cord to the L1  
or L1/L2 jack of your two-line phone and the other end  
to the PHONE jack on the back of your Beamer TV.  
4) Plug one end of the enclosed video cable into the  
VIDEO OUT jack on the back of Beamer TV and the  
other end into a Video input jack on your television.  
5) Set your television to the correct video input source.  
6) Plug the AC power adapter’s pin into the POWER IN  
jack on the back of your Beamer TV.  
7) Plug the power cord into a wall socket.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Your television displays the message “Beamer TV is now  
ready” to let you know when it’s ready for you to place or  
receive a video call. See the figure on page 5.  
Two-Line Phone with a Double Wall Jack  
If you have a two-line phone that connects to a double wall  
jack, connect your Beamer TV to Line 1 of your double wall  
jack, and to the L1 or L1/L2 jack on your two-line phone.  
1) Place your Beamer TV on top of your television.  
2) Connect one end of a supplied telephone cord to your  
nearest telephone wall jack and the other end to the  
LINE IN jack on the back of your Beamer TV.  
3) Connect one end of a supplied phone cord to the L1  
or L1/L2 jack of your two-line phone and the other end  
to the PHONE jack on the back of your Beamer TV.  
4) Plug the one end of the enclosed video cable into the  
VIDEO OUT jack on the back of Beamer TV and the  
other end into the Video input jack on your television.  
5) Set your television to the correct video input source.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6) Plug the AC power adapter’s pin into the POWER IN  
jack on the back of your Beamer TV.  
7) Plug the power cord into a wall socket.  
Your television displays the message “Beamer TV is now  
ready” to let you know when it is ready for you to place or  
receive a video call. See the figure on page 5.  
Preparing Beamer TV’s Remote Control  
Before using the remote control for Beamer TV you need to  
remove the protective cover over the battery.  
1) Remove battery cover.  
2) Pull plastic covering from top of battery.  
3) Replace battery cover.  
If you notice that the remote control is not performing as  
usual, the battery may need to be replaced. Replace bat-  
tery with same type and voltage.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting the Camera Angle  
You can adjust your Beamer TV’s self-focusing camera  
lens up and down to account for the height of your  
television and where you sit to make your video call.  
Beamer TV is optimized for callers to sit 4-12 feet from the  
unit. For best results, we recommend sitting between 6-8  
feet from your Beamer TV.  
1) Turn on your television and set it to the correct video  
source.  
2) Press the START/VIEWS button on the remote  
control or on top of your Beamer TV to see the Self  
view (you’ll see yourself as the other party will see  
you during a video call).  
3) Carefully tilt the camera lens until your image is  
centered the way you want it.  
4) Press the START/VIEWS button on the remote  
control or on top of your Beamer TV to remove self  
view.  
Placing a Video Call with your Beamer TV  
When placing a call with your Beamer TV, the person you  
are calling must also have a Beamer videophone (BM-80,  
BM-TV or BM-FX) or H.324 compatible device. To  
maximize your Beamer TV’s performance capabilities, and  
to take full advantage of its great features, we highly  
recommend that both parties use Beamers when placing a  
video call. (See Compatibility on page 21.)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1) Use the phone connected to your Beamer TV to place  
the call. (Audio will only come from the phone handset  
connected to Beamer TV)  
2) Turn television on and set to correct video source.  
3) When the other party answers and you are ready to  
start the video call, press the START/VIEWS button.  
You’ll see and hear a message indicating that your  
Beamer TV is preparing the video. Your television will  
then show the Self view along with a progress bar that  
will indicate when the video connection is complete.  
IMPORTANT: If both parties press the START/VIEWS  
button at the same time, the video connection may  
fail. If this happens, your Beamer will prompt you to  
press the START/VIEWS button to try again.  
It takes 15-60 seconds to complete the video  
connection between you and the person you are  
calling. For the first few seconds, you’ll hear a series  
of beeps and tones on the line. Wait until you see the  
LIVE text on the screen before continuing your  
conversation. While the other party will now be able to  
see you on their display, you will only see the Privacy  
On screen until the other party sends their video  
image.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making video connection  
4) To send a video image, the receiving party must press  
their START/VIEWS button. The receiving party  
should not press their START/VIEWS button until the  
initial video connection - from you to the person you’re  
calling - is complete.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Combo view  
5) To end your video call, simply hang up the phone.  
Receiving a Video Call with your Beamer TV  
1) Answer the call with the phone connected to Beamer  
TV.  
2) Follow steps #2, #3 and #4 in Placing a Video Call  
with your Beamer TV on page 9.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Locating your Beamer TV’s Features  
Your Beamer TV places everything you need right at your  
fingertips.  
1
2
Start/Views Button  
Remote Control  
3 Camera Lens  
4
5
Line In Jack  
Phone In  
6 Power In 12V DC  
7
Video Out  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1
Snapshot Button  
2 Start/Views Button  
3
4
Detail Button  
Movement Button  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using your Beamer TV’s Features  
Start/Views Button  
Use the START/VIEWS button on the remote control or on  
top of Beamer TV to start a video call. During a video call,  
press either START/VIEWS button to step through the  
three viewing options:  
• Combo view (see yourself and the other party)  
• Other Party view (see only the other party)  
• Self view (see only yourself).  
Combo  
Self  
Other Party  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Snapshot Button and Privacy Feature  
Use the SNAPSHOT button to send a single high  
resolution still picture instead of live video. You can  
continue talking while showing the other party a detailed  
picture, like a document or photo. You can also use this  
feature for privacy because the other party sees only the  
still picture that you sent, not any activity in front of your  
Beamer TV. When you’re ready to resume sending live  
video, just press the SNAPSHOT button again.  
1) Press the SNAPSHOT button once to capture your  
current picture and send it as a single high resolution  
still picture.  
Important: If you press the SNAPSHOT button a second time,  
Snapshot mode is canceled and live video resumes.  
Sending snapshot  
Note: You’ll see the message “Sending snapshot” to let  
you know that your Beamer TV is sending the  
snapshot.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2) When the other party receives the high resolution still  
picture that you sent, you’ll see “Snapshot sent” on  
your screen.  
The other party sees similar status messages  
indicating the progress of the transmission. They will  
also see a “Snapshot received” message as a  
reminder that they are seeing a snapshot.  
Receiving snapshot  
3) To resume sending live video, press the SNAPSHOT  
button once. The snapshot messages disappear and  
live video replaces the still picture.  
Note: Only the party who sent the snapshot can restart  
their live video.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detail/Movement Buttons  
The DETAIL/MOVEMENT buttons adjust the sharpness of  
the video you see. It is a balance between detail and  
movement. Press the DETAIL button to increase picture  
sharpness. Press the MOVEMENT button to see more fluid  
motion.  
When you press the DETAIL/MOVEMENT buttons, an  
indicator bar shows the current setting.  
Adjusting video  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Line  
Line Quality Indicator  
The quality of your video call depends on the quality of  
your telephone line. A blinking red “LINE” will appear in the  
upper, right hand corner of the television if the line quality  
drops by more than 10%. If the Line Quality Indicator  
appears frequently, you may want to try your call again or  
have your telephone line tested by your local carrier.  
When the line quality drops too low to support a video call,  
Beamer TV will automatically attempt to improve the  
connection, which may take up to 20 seconds. During this  
time a beep and a “Please wait” message will be heard. If  
the connection has improved enough to support a video  
call, a second beep will be heard and you may continue  
your video call. However, if the connection still cannot  
support a video call, your television will display “Line  
condition cannot support video. Returning to voice only  
call. Press START/VIEWS to try video again”. At this time,  
you may continue a voice only call or try to establish a  
video call again by pressing the START/VIEWS button.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tips  
Follow these tips to get better results with your Beamer TV.  
Lighting  
Correct lighting is important for good picture quality. For  
optimal results, we recommend front or side lighting. Don’t  
place lights or mirrors behind you, since they may shine  
into the camera lens.  
Best Viewing Distance  
Beamer TV is designed for callers to sit 4-12 feet from the  
unit. For best results, we recommend sitting 6-8 feet from  
your Beamer TV.  
Use Self View to find best camera angle  
Before making a call use the START/VIEWS button to  
make sure that you are correctly lined up with the camera  
and to preview what the other party will see.  
Movement  
If you make rapid movements, the other party may see a  
slightly blurred picture. Just move naturally in front of the  
camera. Clothing with busy patterns or stripes may also  
cause some distortion.  
If you see a blurred picture, or not enough detail, you can  
adjust the picture sharpness. (See Detail/Movement  
Buttons on page 18 for more information.)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Call Waiting and Three-Way Calling  
If you subscribe to Call Waiting, you may want to disable it  
before placing a video call. The Call Waiting tone may  
disrupt the video call, causing the line quality to drop and  
the Line Quality Indicator to appear. Please check with your  
telephone service provider for the code to disable Call  
Waiting.  
Three-Way Calling services are not currently compatible  
with Beamer TV or most videophones.  
Compatibility  
Both parties need a Beamer or compatible H.324 device to  
view Beamer TV’s live full color video. Your Beamer TV will  
work with most videophones that meet the H.324  
International Telecommunications Union (ITU) standard.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Care and Maintenance  
To keep your Vialta Beamer TV working and looking good,  
follow these simple guidelines:  
• Avoid putting your Beamer TV near heating  
appliances and devices that generate electrical  
noise. (For example, motors and fluorescent lamps.)  
• Do not expose your Beamer TV to direct sunlight or  
moisture.  
• Clean your Beamer TV with a soft cloth. (Remember  
to unplug your Beamer TV from the wall and  
telephone outlet first).  
• Never use a strong cleaning agent or abrasive  
powder when caring for your Beamer TV, as this will  
damage the finish.  
• Retain the original packaging for future use.  
information.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting Guide  
Problem  
What to Do  
No dial tone on  
Make sure Beamer TV’s LINE IN jack is  
phone connected connected to your telephone wall jack and  
to Beamer TV.  
that the phone is connected to Beamer TV’s  
PHONE IN jack.  
Can’t be heard by Make sure mute is OFF on your phone.  
other party.  
While establishing a video call the audio is  
muted until you see the other party.  
Can’t hear other  
party.  
The audio is delivered to your phone handset  
only. Double check your handset volume.  
Make sure their mute is OFF on their phone.  
While establishing a video call the audio is  
muted until you see the other party.  
Beamer TV won’t Ensure that the AC power cord is connected  
connect.  
securely. Only use the supplied AC power  
adapter.  
Have the other party initiate the video call.  
Try using another long distance carrier.  
Choppy video &  
Adjust the balance between DETAIL and  
poor sound quality. MOVEMENT. If this doesn’t fix the problem,  
the connect rate may be low. Hang up and  
place the call again.  
Black Screen  
Be sure your television or VCR is set to the  
correct video input.  
Remote does not Battery may need to be changed.  
work.  
Verify that the Infrared receiver is not  
blocked.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
System  
ITU-T Standard H.324  
CIF  
QCIF  
352 x 288 pixels  
176 x 144 pixels  
Resolution  
SQCIF 128 x 96 pixels  
Imaging Device  
14” CMOS 101k pixels  
Dynamic Range > 72dB  
Min. Illumination < [email protected]  
Auto Exposure and White Balance  
Built-in Camera  
RJ-11 Phone Line Jack, Power Input Jack,  
Video Output Jack  
Connections  
POTS (Plain Old Telephone Service phone  
lines)  
Communications  
Max. 33.6 Kbps  
Power Consumption  
18 Watts  
Power  
Operating Voltage (AC adapter) 100-240 VAC,  
50/60 Hz  
Operating  
Storage  
0 - 40º C (non-condensing)  
-20 - 50º C (non-condensing)  
Temperature  
Dimensions  
1.5 in (H) x 6.0 in (D) x 7.6 in (W)  
Information contained in this User’s Guide is subject to  
change at any time, and without notice.  
Vialta®, Beamer™, Beamer TV™, Beamer FX™ and  
VistaFrame™ are trademarks of Vialta, Inc.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Service  
The FCC requires that this product be serviced only by the  
manufacturer or its authorized service agents. In  
accordance with FCC requirements, changes or  
modifications not expressly approved by Vialta, Inc. could  
void the user’s authority to operate this product. For  
instructions on how to obtain service refer to the warranty  
included in this guide or call Vialta Customer Care at  
510-870-3198. Or send email to: [email protected]  
Attach your sales receipt to this booklet for future  
reference, or jot down the date this product was  
purchased, along with the name of the store. This  
information will be valuable if service should be required  
during the warranty period.  
Purchase  
date____________________________________  
Name of  
store_____________________________________  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Limited Warranty  
Vialta Beamer TV (BM-TV)  
Be sure to keep your original sales slip. Attach it to this User's Guide and  
keep both accessible. Also, keep the original box and packing material in  
case you need to return your Beamer TV for service.  
Limited Warranty  
Vialta, Inc. (Vialta) warrants this product against substantial defects in  
materials or workmanship to the original purchaser as follows:  
Labor: Vialta will repair or replace this product, at its option and without  
charge, if it is determined to be defective, for a period of 90 days from date  
of purchase. After 90 days, labor charges will apply to all repair services.  
Parts: In addition, Vialta will replace defective parts, without charge, for a  
period of one year from date of purchase. After 90 days, labor charges will  
apply to all repair services.  
Exclusions: This warranty does not cover installation or setup charges.  
Cosmetic damage, unauthorized repair, acts of God, accidental damage,  
misuse, abuse, negligence, improper voltage, or customer modification of  
the unit are not covered. Any commercial use of this product will  
automatically void this warranty. This warranty is invalid if the factory applied  
serial number has been altered or obliterated.  
IN NO EVENT SHALL VIALTA BE LIABLE OR IN ANY WAY  
RESPONSIBLE FOR DAMAGES OR DEFECTS IN THE PRODUCT  
CAUSED BY REPAIRS OR ATTEMPTED REPAIRS PERFORMED BY  
ANYONE OTHER THAN AN AUTHORIZED SERVICE REPRESENTATIVE.  
NOR SHALL VIALTA BE LIABLE OR IN ANY WAY BE RESPONSIBLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL ECONOMIC OR PROPERTY  
DAMAGE.  
Because some states do not allow the exclusion or limitation of  
consequential or incidental damages, the above limitations may not apply to  
you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND  
YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM  
STATE TO STATE.  
Proof of purchase, such as a bill of sale or receipted invoice that indicates  
that the unit is within the warranty period is required to obtain warranty  
service.  
Warranty service will be provided when the product is returned to Vialta, in  
its original packaging and postage prepaid. For product return or customer  
questions, please call Vialta at 510-870-3198. Or send email to  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FCC Statement  
FCC Part 15 Information  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the Federal Communication  
Commission (FCC) Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy  
and if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC Part 68 Information  
This equipment complies with Part 68 of the FCC rules and the  
requirements adopted by the ACTA. On the bottom of this equipment is a  
label that contains, among other information, a product identifier in the  
format US:AAAEQ##TXXXX. If requested, this number must be provided to  
the telephone company.  
An applicable certification jacks Universal Service Order Codes (USOC) for  
the equipment is provided (i.e., RJ11C) in the packaging with each piece of  
approved terminal equipment.  
A plug and jack used to connect this equipment to the premises wiring and  
telephone network must comply with the applicable FCC Part 68 rules and  
requirements adopted by the ACTA. A compliant telephone cord and  
modular plug is provided with this product. It is designed to be connected to  
a compatible modular jack that is also compliant. See installation  
instructions for details.  
The REN is used to determine the number of devices that may be  
connected to a telephone line. Excessive RENs on a telephone line may  
result in the devices not ringing in response to an incoming call. In most but  
not all areas, the sum of RENs should not exceed five (5.0). To be certain of  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
the number of devices that may be connected to a line, as determined by  
the total RENs, contact the local telephone company. For products approved  
after July 23, 2001, the REN for this product is part of the product identifier  
that has the format US:AAAEQ##TXXXX. The digits represented by ## are  
the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier  
products, the REN is separately shown on the label.  
If this equipment causes harm to the telephone network, the telephone  
company will notify you in advance that temporary discontinuance of service  
may be required. But if advance notice isn't practical, the telephone  
company will notify the customer as soon as possible. Also, you will be  
advised of your right to file a complaint with the FCC if you believe it is  
necessary.  
The telephone company may make changes in its facilities, equipment,  
operations or procedures that could affect the operation of the equipment. If  
this happens the telephone company will provide advance notice in order for  
you to make necessary modifications to maintain uninterrupted service.  
NOTICE: If your home has specially wired alarm equipment connected to  
the telephone line, ensure the installation of this equipment does not disable  
your alarm equipment. If you have questions about what will disable alarm  
equipment, consult your telephone company or a qualified installer.  
NOTICE: According to telephone company reports, AC electrical surges,  
typically resulting from lightning strikes, are very destructive to telephone  
equipment connected to AC power sources. To minimize damage from  
these types of surges, a surge arrestor is recommended.  
Should you experience trouble with this equipment, please contact Vialta at  
510-870-3198 for repair or warranty information. If the equipment is causing  
harm to the telephone network, the telephone company may request that  
you disconnect the equipment until the problem is resolved.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specials and Easy Registration  
For cool tips, the latest Beamer specials, and easy online  
Other Products from Vialta  
Beamer  
- Videophone Station that adds live color video  
on a 3.5” LCD flat screen.  
VistaFrame - The innovative frame that displays your  
digital pictures.  
For more information, please visit us at:  
Vialta, Inc.  
Fremont, California, USA  
11PG05-00002-C  
©2003, by Vialta, Inc. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Techno Source Handheld Game System 20706 User Manual
Thecus Technology Computer Drive N299 User Manual
Thermos Gas Grill 461320507 User Manual
Timex Heart Rate Monitor 117 095000 User Manual
Top Innovations Carpet Cleaner SF 220 User Manual
Toshiba Copier eSTUDIO550 User Manual
Toshiba Projection Television 65HM117 User Manual
True Fitness Home Gym ADI 10260 I User Manual
VTech Cordless Telephone IP8300 User Manual
Vulcan Hart Fondue Maker ICM24 User Manual