®
Planet Light
PL03
Energy Saving Natural Spectrum®
Desk Lamp
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETYINSTRUCTIONS
SAVE THESE INSTRUCTIONS
Thank you for purchasing the Planet Light® Energy Saving Natural Spectrum®
Desk Lamp. Please read the following safety information before using. To reduce
the risk of fire, electrical shock, or injury to persons:
• Do NOT dismantle.
• Do NOT alter power cord.
• Turn off/unplug and allow to cool before replacing bulb or cleaning.
• For indoor use only.
• The lamp is an electrical device. DO NOT USE NEAR WATER.
GENERAL PRECAUTIONS
• Before plugging in the lamp, check to make sure the voltage corresponds
with the main voltage of your location (120 volts).
• Do not use the lamp outside or in wet locations such as bathrooms. It is
intended for indoor, dry use only.
• Not for use with light dimmers, timers, motion detectors or extension cords.
• This product may cause interference with radios, cordless telephones,
or devices that use a wireless remote control such as televisions. If
interference occurs, move the product away from the device, plug the
product or device into a different outlet or move the lamp out of the line of
sight of the remote control receiver.
• Do NOT use lubricating agent in assembly; please see troubleshooting
section if you are having difficulty assembling your lamp.
• Unplug from electrical outlet for extended periods of non-use or during
lightning storms to ensure protection of the electronics.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTINGSTARTED
Main Parts & Controls
E. Polarized Plug
F. Bulb
G. Switch
A. Lamp Head
B. Gooseneck
C. Lamp Base
D. Power Cord
A
B
D
C
E
Close-up of Lamp Head
A
F
G
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BULB INSTALLATION
To prevent damage during shipping, the Verilux bulb is surrounded by
protective padding. Carefully remove and dispose of the protective
padding. Check to ensure that the bulb is fully seated and has not
come loose from the socket during shipping. There should be no gap
between the bulb and socket.
Before bulb installation, please review all instructions.
Installation
1. Unplug lamp from power source.
2. Firmly hold base (B) and push bulb (C) into the socket (A).
3. Be sure bulb is firmly seated in the socket (see below) and
snapped into the metal bulb clip (D).
D
Removal
1. Unplug lamp from power
source.
2. Firmly hold bulb base (B)
and pull bulb (C) from the
socket (A) in an outward
motion.
C
A
B
Incorrectly seated bulb
Correctly seated bulb
No
Gap
Notice
Large Gap
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
• Make sure all power connectors, cords, and plugs are inserted fully
and securely.
• Make sure there is power to the wall outlet or try another outlet – not
connected to a dimmer.
Be sure the bulb is securely seated into the socket, repeat the bulb
installation process. CAUTION: DISCONNECT LAMP FROM OUTLET
PRIOR TO REPEATING THE BULB INSTALLATION PROCESS.
CARE & CLEANING
Your Planet Light® lamp is made from high quality materials that will last
for many years with a minimum of care.
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR
CLEANERS CONTAINING ABRASIVES OR AMMONIA
WARNING: To prevent risk of shock or personal injury
when cleaning lamp, make sure you have turned off and
unplugged the lamp, and allow sufficient time for the bulb
to cool.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
One Year Limited Warranty
ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE
STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!
Customer Service Department at 802-496-3101 during normal business hours.
This limited warranty is provided by: Verilux®, Inc., 340 Mad River Park, Waitsfield, VT 05673
Verilux warrants this product to be free from defects in material and workmanship for a
period of one year from the date of the original retail purchase from Verilux or an authorized
Verilux distributor. Proof of purchase is required for all warranty claims. During the
limited warranty period, Verilux, Inc. will, at its option, repair or replace defective parts of
this product, at no charge to the customer, subject to the following limitations: This limited
warranty does not include any postage, freight, handling, insurance or delivery fees. This
warranty does not cover damage, defect or failure caused by or resulting from accident,
external destruction, alteration, modification, abuse, misuse or misapplication of this
product.
This warranty does not cover damage to the product resulting from return shipping or
handling. The use of shipping insurance is recommended to help protect your product.
Return Authorization is required for all returns. To obtain a Return Authorization, please
contact the Verilux Customer Service Department at 802-496-3101.
If, during the first year of ownership, this product fails to operate properly, it should be
customer service representative at 802-496-3101.
Note: Verilux recommends using a quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be
purchased at electronics stores.
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China for Verilux, Inc.
© Copyright 2010 Verilux, Inc. All rights reserved.
PL03-MAN-Rev4
Download from Www.Somanuals.com. All Manuals Search And Download.
|