u e )
ê m e - g r a v e s p o u r c i n é m a m a i s o n c o m m a n d é p a r D S P
TM
CHT-8R
TM
TM
CHT-10R
CHT-12R
and
TM
d e l ' U t i l i s a t e u r
CHT-15R
User's Manual
DSP-ControlledHomeTheaterSubwoofer
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations!
Congratulations on your purchase of aVelodyne Classic HomeTheater
(CHT-R) subwoofer. This system represents the state-of-the-art in low
frequency reproduction. Read and follow the instructions below to in-
sure safe and proper system operation.
s a n c e ( C H T
s a n c e ( C H T
s a n c e ( C H T
r n e
Warning!
To prevent fire or shock hazard, do not expose this equipment to
rain or moisture. To avoid electrical shock, do not open speaker
enclosure or amp chassis cover. Please observe all warnings on
the equipment itself. There are no user serviceable parts inside.
e c t a b l e s p o u r u n m o d e d ’ é c o u t e
Please refer all service questions to your authorized Velodyne dealer.
t i q u e s e t c o m m a n d e s d u p r o d u i t
Prior to Installation
Pleaseunpackthesystemcarefully. Removeallstaplesusedtoseal
r p o u v o i r v o u s y r é f é r e r u l t é r i e u r e m e n t .
the carton as they can scratch the cabinet. Please save the carton
andallpackagingmaterialsforfutureuse. Recordtheserialnumber
a t é r i e l d ’ e m b a l l a g e p o u r p o u v o i r l ’ u t i l i s e r p l u s t a r d .
in the space provided on the warranty card for future reference.
e c a r e l l e s r i s q u e n t d ’ é r a f l e r l ’ e n c e i n t e . G a r d e z l a b o î t e
s y s t è m e a v e c s o i n . E n l e v e z t o u t e s l e s a g r a f e s q u i f e r -
Product Features and Controls
s t a l l a t i o n
•
•
•
•
•
DSP-controlled
4 selectable presets for customized listening mode
Night-mode setting
t o r i s é .
o n c e r n a n t l a r é p a r a t i o n , c o n s u l t e z u n c o n c e s s i o n n a i r e
Mute control
c e s r é p a r a b l e s p a r l ’ u t i l i s a t e u r à l ’ i n t é r i e u r . P o u r t o u t e s
Built-in 160 watt (RMS) power amplifier (CHT-8R)
m e n t s q u i s e t r o u v e n t s u r l ’ é q u i p e m e n t l u i - m ê m e . I l n ’ y
•
Built-in 175 watt (RMS) power amplifier (CHT-10R)
u c h â s s i s d ’ a m p l i f i c a t e u r . V e u i l l e z t e n i r c o m p t e d e t o u s
Built-in 200 watt (RMS) power amplifier (CHT-12R)
o n , n ’ o u v r e z p a s l ’ e n c e i n t e d e s h a u t - p a r l e u r s n i l e
Built-in 600 watt (RMS) power amplifier (CHT-15R)
•
•
•
e n t à l a p l u i e o u à l ’ h u m i d i t é . P o u r é v i t e r l e s r i s q u e s
Adjustable (40 to 120 Hz) low-pass crossover with Subwoofer
e s r i s q u e s d ’ i n c e n d i e e t d ’ é l e c t r o c u t i o n , n ’ e x p o s e z p a s
Direct setting
•
•
Speaker-level inputs and outputs
85 Hz high-pass crossover
Line-level inputs
Signal sensing auto turn on/off with bypass option
Variable volume control
Selectable phase control (0, 90, 180, or 270 degrees)
Dual staggered low-pass crossover; 12 dB/octave initial, 24
dB/octave ultimate
e d u s y s t è m e .
•
c i - d e s s o u s p o u r a s s u r e r l e f o n c t i o n n e m e n t a p p r o p r i é
t i o n d e b a s s e s f r é q u e n c e s
•
e m ™ . C e s y s t è m e e s t à l a p o i n t e d u p r o g r è s e n m a t i è r e
•
•
•
p r é s e n t o n s n o s f é l i c i t a t i o n s p o u r a v o i r a c h e t é u n c a i s -
a t i o n s !
continued. . .
☞
2
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Anti-clipping circuit
Over excursion protection
Slot loaded design
Installation
Your new subwoofer system provides for a number of installation
options. Read all the installation information below in order to
determine which installation option is best for your system.
Remember to perform all installation procedures with system power
turned off.
80 Hz
LOW-PASS
CROSSOVER
DIRECT
40 Hz
1
2
UP
VOLUME
DOWN
CHT-R Series
ACTIVE
AUTO ON/OFF
INACTIVE
L
SERIAL #
3
R
VELODYNE ACOUSTICS, INC.
WARNING:TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
OUTPUT
4
5
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
INPUT
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
AVIS:
DOUBLE INSULATION
-
WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS
LFE IN
100 Hz
80 Hz
HIGH-PASS
CROSSOVER
6
7
SPEAKER LEVEL INPUT
POWER
ON
RIGHT
LEFT
OFF
8
230V~
50Hz
SPEAKER LEVEL OUTPUT
F
1A
L
Figure 1. CHT-R Rear Panel Connections
☞
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel Connections
Figure 1 shows the connections on the rear panel of the CHT-R.
r f r r e z s a n s d o u t e a c c e p t e r
Following are brief descriptions of the connections described in Figure
t r a n s m i s e s . P o u r l e s h a u t - p a r l e u r s p l u s g r o s a y a n t u n e
1. More detail on these connections can be found on the next page.
f r
(1) LOW-PASS CROSSOVER
a u t - p a r l e u r . P o u r l e s h a u t - p a r l e u r s p l u s p e t i t s a y a n t u n e
Use this knob to select the high-frequency range at which you
wish to cut off the signal to the subwoofer. When the knob is
turned all the way to the left, the Subwoofer Direct feature is
e c t i f o n c t i o n n e
a t e u r s
d e F I L T R E P A S S I F P A S S E - H A U T
invoked and the subwoofer plays all frequencies up to 200 Hz.
n a l d a n s l e s e n t r
(2) VOLUMEControl
r d a v a n t a g e d e s i g n a l , u t i l i s e z u n c o n n e c t e u r
Thiscontrolallowsyoutobalancetheoutputfromthesubwoofer
c e s s e u r , b r a n c h e z l e c
to the main speakers in your system. This control should be set
. S i v o u s u t i l i s e z l a s o r t i e L F E d e v o t r e
to achieve similar volume level from between both the main
u a u x j a c k s d e s o r t i e d u c a i s s o n d
speakersandsubwoofer. Whenpressingvolumeupordown,the
c e s j a c k s
speedatwhichthepowerlightblinksindicatessubwoofervolume
- the faster the blinking, the louder the unit plays.
o u s .
Note: Volumeisalsocontrollablebyusingthesuppliedremote.
e p a s s i f p a s s e - b a s i n t e r n e d u C H T - R . L i s e z l
c e s j a c k s
(3) AUTO ON/OFF Switch
Use this switch to select between auto-on (active) and constant
on (inactive) operation.
a u t o m a t i q u e ( a c t i f ) o u e n m o d e d e m a r c h e c o n s t a n t e
(4) LINE OUTPUT
n t e r r u p t e u r p o u r s
R C H E / A R R
ConnectthesejackstotheLINEINpreampinputtousetheCHT-R’s
internalhighpasscrossover. Seebelowforamoredetailedexplanation
ofthiscrossover.
u t a u s s i c o m m a n d e r l e v o l u m e
(5) LINE INPUT/LFE Input
Connect these jacks to the LINE OUT preamp output, LFE
n t c l i g n o t e v i t e , p l u s l
output, or subwoofer output jacks of your receiver/processor. If
i g n o t e i n d i q u e l e v o l u m e d u c a i s s o n d
using the LFE output from your receiver or processor, plug the
u y e z s u r l e v o l u m e , l a v i t e s s e
singlecableintothe“L”–LFEinputor, formoresignal, usea“Y”
u t - p a r l e u r s p r i n c i p a u x e t l e c a i s s o n d
connector and feed the signal into both “R” and “L” inputs.
d e d e v r a i t
h a u t - p a r l e u r s p r i n c i p a u x d e v o t r e s y s t
m a n d e v o u s p e r m e t d
V O L U M E
continued. . .
☞
4
Download from Www.Somanuals.com. All Manuals Search And Download.
(6) HIGH PASS CROSSOVER Switch
This switch selects the frequency for the high pass crossover.
This crossover is functional on both line and speaker-level
outputs. Smallerspeakerswithlimitedlowfrequencyoutputmay
performbetterusingthehigher100Hzsettingthatwillreducethe
low frequencies sent to them. Larger speakers with greater low
frequencyoutputmaybeabletohandlethe80Hzsettingwithout
strain.
(7) SPEAKER LEVEL INPUTTerminals
Connect these input terminals to the speaker output terminals
of your amplifier or receiver. If you use this method of
connection, when you go to the receiver speaker set up menu,
make sure you select the large speaker option.
(8) SPEAKER LEVEL OUTPUTTerminals
Sends a crossed-over speaker-level signal to the front speakers.
See below for a more detailed explanation of this crossover.
Rear Panel Connections – Detailed Explanation
Your new subwoofer is equipped with both speaker-level and line-
levelinputs. UsetheRCA/Phonotype“INPUT”jackswhenconnect-
ing your subwoofer to a pre-amp, signal processor, or line-level
crossover. The “SPEAKER LEVEL INPUT” jacks connect directly
to the speaker outputs of an integrated amplifier or receiver. Your
amplifier section will notice no additional loading effects when you
use these inputs because of their high impedance.
Note:
DonotuseboththeRCA/Phono“INPUT”connectionsand“SPEAKER
LEVEL INPUT” connections simultaneously.
Low-PassCrossover
Both sets of inputs sum the left and right channels together and the
resulting signal is passed through an adjustable low-pass crossover
before being amplified. The crossover control allows you to adjust
the upper limit of the subwoofer’s frequency response from 40 to
120 Hz. The subwoofer’s response will begin rolling off above the
frequency you set this control to.
☞
5
Download from Www.Somanuals.com. All Manuals Search And Download.
You should set the crossover frequency to obtain a smooth and
seamlesstransitionfromthesubwoofertothemainspeakersinyour
l t r e p a s s i f p a s s e - b a s q u i p e r m e t d e t r a n s m e t t r e d e s
system. If your main speakers are smaller units with limited low
D i r e c t (
frequencyoutput, youmaywishtochooseahigherfrequency(such
as 100-120 Hz) than you would with larger speakers which have
greater low frequency output. With larger speakers, you might start
8 0 H z , p a r e x e m p l e
with this control set lower, such as 80 Hz.
s p o u r r i e z c o m m e n c e r a v e c u n r é g l a g e m o i n d r e d e c e t t e
o r t i e b a s s e f r é q u e n c e s u p é r i e u r e . A v e c l e s g r o s h a u t -
Subwoofer Direct
à c e l l e q u e v o u s a u r i e z a v e c d e s h a u t - p a r l e u r s p l u s g r o s
Subwoofer Direct is a setting on the low-pass crossover knob and
p o u v e z c h o i s i r u n e f r é q u e n c e s u p é r i e u r e ( 1 0 0 - 1 2 0 H z ,
will allow frequencies up to 200 Hz into the subwoofer. See below
c i p a u x s o n t p l u s p e t i t s e t o n t u n e s o r t i e b a s s e f r é q u e n c e
for a more detailed explanation of this feature.
a u t - p a r l e u r s p r i n c i p a u x d e v o t r e s y s t è m e . S i v o s h a u t -
d o u c e u r e t s a n s i n t e r r u p t i o n d u c a i s s o n d ’ e x t r ê m e s
Speaker Level Output/Line Level Output
r é g l e r l a f r é q u e n c e d u f i l t r e p a s s e - b a s a f i n d ’ o b t e n i r u n e
When connected in this fashion, your satellite speakers will be
crossed over at 80 Hz. This removes the lower bass from your
satellites, enabling them to do a better job reproducing high
d e s s u s d e l a f r
s s o n d
n d
frequencies and giving your receiver’s amp more headroom (up to
50% more power).
f v o u s p e r m e t d e r
You may also connect your satellites directly to your receiver or
f p a s s e - b a s r
amplifier along with the subwoofer if you wish to bypass this
e d r o i t e e n s e m b l e e t l e s i g n a l r
crossover.
s e m b l e s d
p a s s e - b a s
Caution!!!
To avoid damage to your main amplifier, be sure to maintain correct
polarity when making all connections. Red (positive) to red, and
U T
s l e s c o n n e x i o n s R C A / P h o n o «
black (negative) to black. Be sure that all connections are tight, and
that there are no loose strands or frayed wires.
u t i l i s e z c e s e n t r
Power Switch
r u n p e p l d
Themasterpowerswitchislocatedonthelowerrighthalfoftheunit.
This rocker style switch is the main on/off for the unit. This switch
L E U R ) s e c o n n e c t e n t d i r e c t e m e n t a u x s o r t i e s h a u t -
should be set to position 1 for on (up), 0 for off (down).
j a c k s
u p r o c e s s e u r d e s i g n a l o u a u f i l t r e p a s s i f d e n i v e a u
AWordAboutYourReceiver’sCrossoverandtheCHT-R
o n n e c t e r l e c a i s s o n a u
Crossover
h a u t - p a r l e u r e t p o u r l e n i v e a u d e l i g n e . U t i l i s e z d e s j a c k s
YourVelodyne CHT-R subwoofer is designed to operate using the full
range audio signal for input when using the built-in crossover (controlled
a u c a i s s o n d
by the dial on the back panel). Many home theater processors/receivers
o n D é t a i l l é e
(Dolby Digital®, DTS®, THX®) have a “subwoofer out”jack that performs
continued. . .
☞
6
Download from Www.Somanuals.com. All Manuals Search And Download.
this same function and are designed to be used with a powered
subwoofer.
In these installations, you may want to bypass the crossover in
either the processor or the Velodyne subwoofer. In some cases,
you may want to use BOTH crossovers. To do this, you can use
both your processor’s crossover and the one internal to theVelodyne
sub. You should stagger the frequencies (i.e., 120 Hz subwoofer, 80
Hz processor) for best results.
To bypass the subwoofer’s internal crossover when the unit is being
fed a low pass signal from another crossover, simply locate the
knob marked “LOW-PASS CROSSOVER” on the rear panel of the
subwoofer and turn it counterclockwise to the “DIRECT” position.
This will eliminate the internal crossover from the signal path.
Note:
If not using an external crossover, you should use the built-in
crossover for optimal performance. When using a single RCA sub
out from the processor, it does not matter which line level input (L/R)
is used.
Interconnect Cables
When installing your new Velodyne subwoofer using the line-level
connections, you should always use shielded phono cables. There
are many decent cables available today, most any of which will
work perfectly well. We do recommend that you keep the length of
cable as short as possible to avoid any potential noise problems.
When using speaker level connections, use a quality speaker cable
that mates well with the connectors (at least 14-gauge). Be very
careful to avoid any loose or frayed strands that could result in a
short, causing a dangerous condition and possible damage to your
unit. Cables of extremely large size are typically not required. Ex-
tremely large gauge wire may not properly fit in the binding posts,
resulting in a poor connection and possible short circuits.
Placement
True subwoofers operate at extremely low frequencies, which are
primarily omni-directional. While it is recommended that the
subwoofers be placed on the same plane as the satellite speakers,
☞
7
Download from Www.Somanuals.com. All Manuals Search And Download.
room and system conditions often dictate otherwise. Keep in mind
that frequency response and output level can be drastically influenced
by placement, depending on the acoustic properties of your listening
room. Typically, the optimum location for a subwoofer is in a front
corner of your listening room. This location will usually offer the
greatest output levels and optimum low frequency extension. The
worst location for a subwoofer is typically far away from any walls,
close to the center of your room and near an opening or door way.
q u i s o n t s u r
s s o n s d
a c e
e c o n n e c t e r a i e n t p a s b i e n s u r l e s b o r n e s e t d o n n e r a i e n t
e n t p a s n
Avoid these locations when possible. When using a pair ofVelodyne
subwoofers in stereo, it is preferable to place each subwoofer near
s i t u a t i o n d a n g e r e u s e , e t d e s d o m m a g e s
the satellite of the same channel. Typically, a minimum distance of
e s s e r r
1 to 2 feet from your TV to the subwoofer will be adequate to avoid
( c a l i b r e 1 4 a u m o i n s ) .
any magnetic interference.
u r d e b o n n e q u a l i t
e
Caution!
This subwoofer has electronics built into the cabinet. Do not place
the cabinet next to sources of heat such as furnace registers,
o n s d e g a r d e r l e c
radiators, etc. Do not place the unit near sources of excessive
moisture, such as evaporative coolers, humidifiers, etc. The power
c
cord should be routed in such a way that it will not be walked on,
c o n n e x i o n s d e n i v e a u d e l i g n e , v o u s d e v e z t o u j o u r s
pinched, or compressed in any way that could result in damaging
i n s t a l l e z v o t r e n o u v e a u c a i s s o n d
the insulation or wire.
i n t e r c o n n e x i o n
d r o i t e ) .
s e u l e s o r
i n t e r n e p o u r u n e p e r f o r m a n c e o p t i m a l e q u a n d v o u s
i s e z p a s d e f i l t r e p a s s i f e x t e r n e , v o u s d e v r i e z u t i l i s e r l e
d u c h e m i n d u s i g n a l .
a n t i h o r a i r e
a u a r r i
u v
r o c e s s e u r ) p o u r o b t e n i r d e m e i l l e u r s r
x .
e p a s s i f d e v o t r e p r o c e s s e u r e t l e f i l t r e p a s s i f i n t e r n e d u
continued. . .
☞
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage
This section addresses day-to-day usage of your CHT-R subwoofer.
RemoteControl
Figure 2 shows the remote control, enabling you to easily choose
whateverlisteningmodeyoudesire.
Figure 2. Remote Display
POWER-ThisbuttonforcesyourCHT-Runitintostandbymode. The
wooferwillnotplayandtheLEDwillturnoff. Theunitwillremaininthis
modeuntilthePOWERbuttonispressedagain. Tofullydeactivate(i.e.
powerdown)theunit,turnoffthepowerswitchonthebackpanel.
MUTE-Thisbuttonmutesthesubwoofer. Thelightonthesubwoofer
willblinkslowlyiftheunitismuted. Tounmutethesubwoofer, press
theMUTEbuttonagain.
☞
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PHASE - These buttons allow you to optimize the subwoofer
performance for the location and your listening position. Select the
v o y a n t s u r l e c a i s s o n d
switch position at which you hear the most bass. The light will blink
according to the following schedule:
n c i e u x ) -
a u a r r i
0 degrees
1 blink
90 degrees
180 degrees
270 degrees
2 blinks
3 blinks
4 blinks
W E R s o i t e n f o n c
o d e d
m e n t a t i o n ) -
LIGHT-Ifyouwish,youcandeactivatethepowerlightonyourCHT-R
unit. Todothis,presstheLIGHTbuttononyourremote. Thelightwill
turnoff. Toreactivatethelight,presstheLIGHTbuttonagain.
f i c h a g e à d i s t a n c e
NIGHT-Nightmodelimitsthemaximumoutputofthesubwooferfor
later night listening or to be more considerate of close neighbors.
Press the night button to turn the night mode feature on or off. Night
mode, when active, is indicated by the reduced intensity of the light.
VOLUMECONTROL-Thiscontrolallowsyoutobalancetheoutput
fromthesubwoofertothemainspeakersinyoursystem. Thiscontrol
should be set to achieve similar volume level from between both the
main speakers and subwoofer. When pressing volume up or down,
thespeedatwhichthepowerlightblinksindicatessubwoofervolume
- the faster the blinking, the louder the unit plays.
Note: The volume can also be adjusted via the buttons on the back
panel of the subwoofer. These buttons have the same effect as
pressing the up and down volume buttons on your remote.
PRESETS -Thereare4presets,consistingofMovies,R&B–Rock,
Jazz–Classical,andGames. Asapresetischosen,thelightflashes
thecorrespondingnumberoftimes. Thepresetsprovidethefollowing
characteristics for bass reproduction:
m i r o l e n t r e l a t
Movies:
Maximum output and impact for explosions
and other action adventure movie content.
Provides the driving bass found in today’s
rock music.
R&B – Rock:
o n n t r a i t e d e l
t i o n
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Jazz – Classical: The tightest, cleanest, lowest distortion
bass.
Games:
Maximum loudness available for the im-
pact of video games.
The following table indicates musical style and which preset is
recommended for it.
MUSICAL STYLE
SUGGESTED PRESET
Action Adventure Movies
Country – Rock
Country – Soft
Folk
Movies
R&B – Rock
Jazz – Classical
Jazz – Classical
R&B – Rock
Indie Music
Pop
R&B – Rock
Rock
R&B – Rock
Alternative Rock
Blues
Jazz – Classical
Jazz – Classical
Jazz – Classical
Jazz – Classical
Jazz –Classical
R&B – Rock
Jazz – Classical
R&B – Rock
R&B – Rock
Broadway andVocalists
Children’s Music
Christian and Gospel
Classic Rock
Classical
Dance and DJ
Hard Rock and Metal
Latin Music
R&B – Rock
Miscellaneous
Jazz – Classical
Movies – Non-Action Adventure Jazz – Classical
New Age
Opera andVocal
R&B
Jazz – Classical
Jazz – Classical
R&B – Rock
Rap and Hip-Hop
Soundtracks
R&B – Rock
R&B – Rock or Jazz –
Classical
Video Games
Games
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Each preset has its own characteristics with respect to subsonic
filter, volume differential, and a single equalizer (EQ) in order to
optimize the listening mode for the preset.
o p
The following table shows the settings for various presets:
Subsonic
Filter
EQ
EQ
Volume
Preset
Frequency Frequency Level Differential
Movies
24 Hz
27 Hz
24 Hz
37 Hz
52 Hz
N/A
+4 dB
+3 dB
N/A
+8 dB
+5 dB
N/A
e
m
R&B – Rock
Jazz – Classical
(Reference)
u e
Games
34 Hz
62
+4 dB
+4 dB
i e u s e e t g o s p e l
e n f a n t s
v o c a l i s t e s
RESTORE DEFAULTS – This feature allows you to restore default
settings for your CHT-R Subwoofer. By pressing Presets in EXACTLY
the following order on the remote, the unit’s power light will blink
three times indicating that you have restored defaults.
v e
e
1. Movies
2. R&B – Rock
3. Jazz – Classical
4. Games
a d v e n t u r e
C A L
5. Games
6. Jazz – Classical
7. R&B – Rock
s u i v a n t i n d i q u e l e s t y l e m u s i c a l e t l e p r
8. Movies
When you press the presets in the above order, the power light will
blink three times indicating that you have restored defaults. The
default preset is Jazz/Classical, and the unit’s volume is reset to
a i r e e t a v e c l e
level 35 (out of 100).
a d v e n t u r e .
Care of Your Subwoofer
Do not use any harsh detergents or chemicals to clean the cabinet.
Abrasives, detergents, or cleaning solutions will damage the finish
a r a c t
v o y a n t c l i g n o t e l e n o m b r e d e f o i s c o r r e s p o n d a n t . L e s
on the cabinet. We recommend using a damp cloth to clean the
u e ) , e t G a m e s ( j e u ) . Q u a n d u n p r
front, back and sides. Use a soft cloth with a good quality furniture
polish to clean the hand-rubbed, black lacquer, painted top.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
During normal conditions, the subwoofer may be left on continuously
without any problems. If you plan to leave the unit unused for an
extended period of time, we recommend that you turn off the unit by
the master power switch on the rear panel.
Troubleshooting and Service
Before seeking service for your subwoofer, please re-check all
systems. Following is a simple troubleshooting guide to assist you.
1. Verify that the unit is plugged in and power outlet used is active.
2. Is the power switch on?
3. Is unit receiving an input signal from your source?
4. Have all controls on subwoofer (volume, crossover, phase, etc.)
been properly set?
5. If unit has been running at high levels, one of the protection
circuits may be engaged.
6. Has the built-in amplifier overheated?
If the protection circuitry is active, the unit may cycle on and off
until operating parameters return to normal. Under more serious
conditions, the unit may shut off completely. Normal operation will
return upon cooling, but you may be required to turn the power off
and then on again to reset the unit.
The following conditions require service by a qualified technician:
1. The power cord has become damaged.
2. The unit does not appear to operate normally or exhibits a marked
change in performance.
3. The unit has been exposed to water.
4. Some part of the cabinet or circuitry is physically damaged.
Thank You for Purchasing a Velodyne!
13
Download from Www.Somanuals.com. All Manuals Search And Download.
e l ’ e n c e i n t e o u d e s c i r c u i t s o n t s u b i d e s d o m m a g e s .
m e n t d e p e r f o r m a n c e .
n s s u i v a n t e s d e m a n d e n t l
n t r e v i e n n e n t
d e p r o t e c t i o n e s t e n s e r v i c e , l
s i f , p h a s e , e t c . ) s o n t b i e n r
c o m m a n d e s d u c a i s s o n d
e r
e e t r é p a r a t i o n
r i
e n p e r m a n e n c e s a n s p r o b l
n d i t i o n s n o r m a l e s , l e c a i s s o n d
d e l a q u e n o i r e e t p o l i
v e c u n e c i r e
p o u r n e t t o y e r l e d e v a n t , l
a b r a s i f s , l e s d
f o r t s p o u r n e t t o y e r
d e
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR YOUR RECORDS. . .
Date Puchased___________________________________
Dealer__________________________________________
Serial #_________________________________________
*NOTE: Please complete and return your warranty card within ten (10) days or
Register. . . ON LINE . . . It's faster . . . and easier
LIMITED WARRANTY
VELODYNE ACOUSTICS, Inc. (“VELODYNE”) warrants all powered subwoofers for a period of
two years, and full range speakers for a period of five years. All VELODYNE products have a
warranty from the date of purchase against defects in materials and workmanship subject to the
following conditions:
1.
VELODYNE is not responsible for defects which result from the use of an amplifier or
controller other than the one originally supplied with the unit (subwoofer) or defects which
result from modifications or repairs made by any component of the system by anyone
other than a VELODYNE factory authorized service representative.
This warranty is void if any repairs or service covered by the terms of this warranty are
made to any component of the system by anyone other than aVELODYNE factory autho-
rized service representative.
VELODYNE is not responsible for damage caused by accidents, abuse, misuse, natural
or personal disaster or unauthorized modification. The VELODYNE products are not in-
tended for professional or commercial use andVELODYNE is not responsible for damage
resulting from such use.
2.
3.
4.
5.
The VELODYNE product warranty is limited to units that are purchased from authorized
VELODYNE dealers and finalized within authorized dealer locations.
This warranty is nontransferable under any condition.
TO OBTAIN SERVICE
Information regarding service may be obtained from the dealer from whom you purchased the
unit, or by contacting VELODYNE customer service. Warranty service must be performed by a
VELODYNE factory authorized service representative within the warranty period set forth above.
If VELODYNE determines the unit is defective, VELODYNE will, at VELODYNE’s option, repair
or replace the product at no charge if the product is forwarded prepaid to a factory authorized
service representative. Products forwarded to the factory authorized service representative
should be shipped securely and properly packaged, insured, and freight prepaid.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
d s e c u r e l y a n d p r o p e r
o d u c t a t n o c h a r g e i f t h e p r o d u c t i s f
r
e
u n a u t h o r
i v e .
n t o f t h e s y s t e m b
n s o r r e p a i r s m a d e b
e o n e o r
o n s :
e d a t e o f p u r c h a s e a g a i n s t d e f e c t s i n m a t e r i a l s a n d w o r k m a n s h i p s u b j e c t t o t h e
u l l r a n g e s p e a k e r s f o r a p e r i o d o f f i v e y e a r s . A l l V E L O D Y N E p r o d u c t s h a v e a
O U S T I C S , I n c . (
. . . a n d e a s i e r
e c o m p l e t e a n d r e t u r n y o u r w a r r a n t y c a r d w i t h i n t e n ( 1 0 ) d a y s o r
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C O R D S . . .
16
Download from Www.Somanuals.com. All Manuals Search And Download.
“Not only was the little Velodyne the best small sub I’ve ever used,
it was one of the very best subs I’ve used.”
-John Potis
SoundStage!, April 2002
Other Velodyne Subwoofer Products for Export:
TM
Digital Drive Series
DD-10
DD-12
DD-15THX Ultra 2
DD-18THX Ultra 2
Digital Drive 1812 Signature Edition
TM
TM
SPL Series II
SPL-800 Series II
SPL-1000 Series II
SPL-1200 Series II
VX-10
Velodyne Acoustics, Inc.
345 Digital Drive
Morgan Hill, CA 95037
408.465.2800 voice
408.779.9227 fax
408.779.9208 service fax
Service e-mail: [email protected]
Technical e-mail: [email protected]
Printed on recycled paper.
63-CHTR RevC 22JUN04
Download from Www.Somanuals.com. All Manuals Search And Download.
|