VEC0 1 2 APC
TW O YEAR LIMITED WARRAN TY PRO GRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, Ltd., regarding this product. There is no other warranty, other
than those described herein.
This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects
in materials and workmanship for two years from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Vector Manufacturing, Ltd. will not be
responsible for any amount of damage in excess of the retail purchase price of the product under any
circumstances. Incidental and consequential damages are specifically excluded from coverage under
this warranty.
Jump-Start System
W ith 2 6 0 PSI Air Co m p re sso r
W ith
This product is not intended for commercial use. This warranty does not apply to accessories or damage to
units from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity
power sources.
RETURN/ REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid
to Vector Manufacturing. Any defective product, other than accessories, that is returned to Vector
Manufacturing within 30 days of the date of purchase will be replaced free of charge. If such a product is
returned more than 30 days but less than two years from the purchase date, Vector Manufacturing will
repair the unit or, at its option, replace it free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s
option. A unit may be replaced with a new or reconditioned unit of the same or comparable design.
The repaired or replaced unit will then be warranted under the terms of the remainder of the warranty
period. The customer is responsible for the shipping charges on all returned items after 30 days. During
the warranty period, Vector Manufacturing, Ltd. will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting
from normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage
or exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unau-
thorized use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance,
fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department at (954) 584-4446
or toll free at 866-584-5504 for general repair information and charges if applicable. You may also
contact us through our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations
on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential
damages, so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser
specific legal rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical
Support by telephone, fax or mail. We suggest that you keep the original packaging in case you need
to ship the unit. When returning a product, include your name, address, phone number, dated sales
receipt (or copy) and a description of the reason for return and product serial number. After repairing
or replacing the unit, we will make every effort to return it to you within four weeks.
O W N ER’S MAN UAL &
WARRAN TY IN FO RMATIO N
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing.
Enter “VEC012APC” as Model and Jump-starter / 12V DC power supply as “Product Type”. All Vector
Manufacturing, Ltd. products must be registered within 10 days of purchase to activate this warranty.
Mail the completed registration form, along with a copy of the original sales receipt to:
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE
AND STORAGE OF THIS PRODUCT. BEFORE USING, READ AND UNDERSTAND ALL CAUTIONS,
WARNINGS, INSTRUCTIONS AND PRODUCT LABELS, PLUS YOUR VEHICLE’S BATTERY MANUFACTURER
GUIDELINES. FAILURE TO DO SO COULD RESULT IN INJURY AND/OR PROPERTY DAMAGE.
ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.
4140 SW 28th Way, Ft. Lauderdale, FL 33312
PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556.
WARRANTY MUST BE PURCHASED WITHIN 10 DAYS OF PRODUCT PURCHASE DATE.
WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.
4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312
TEL: 954-584-4446 • FAX: 954-584-5556 • TOLL-FREE 866-584-5504
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIO N :
IN TRO DUCTIO N
Caution statements advise against certain conditions and practices that may
result in damage to vehicles, appliances and/ or the jump-starter.
Congratulations on selecting the VECTOR® JUMP-STARTER, AIR COMPRESSOR
and 12 VOLT DC POWER SUPPLY. This compact jump-starter is unique in the
amount of energy it can supply for its size. The internal battery is a high densi-
ty sealed, lead-acid battery that stores and delivers energy comparable to full
sized ordinary jump-starters. Please read this guide carefully before use to
ensure optimum performance and avoid damage to the unit or items that you
are using it with.
IMPO RTAN T:
Although this unit is delivered in a partially charged state, you must fully charge it
with the supplied 120 Volt AC charger for a full 24 hours before using it for the first
time. You cannot overcharge the unit using the AC charger method.
A standard feature of this model is a high pressure, self-contained tire compres-
sor with lighted gauge. This compressor allows quick inflation of vehicle tires to
260 PSI and with supplied adapter nozzles, inflates beach balls, rafts and virtu-
ally any low-pressure inflatables. Three different sized nozzles allow for easy
connection to all popular inflatables.
The VECTOR® JUMP-STARTER & 12 VOLT DC POWER SUPPLY is a compact,
durable and portable jump-start system for vehicles and boats that have a stan-
dard 12 Volt battery system. This self-contained, rechargeable system will start
most vehicles and boats without the need for a host vehicle or 120 Volt AC
power supply. It can also be used as a safe, portable source of 12 Volt DC
electric power in remote locations and/ or emergency situations. It is ideal for
use with Vector 12 Volt DC cordless, portable, rechargeable products and
MAXXSST DC/ AC Power Inverters.
1) Use only the supplied cords/ adapters for recharging this unit. Do not
recharge for more than 3-4 hours maximum using 12 Volt DC method.
Recharge unit after each use.
2) All On/ Off switches should be in the OFF position when the unit is charging
or not in use. Make sure all switches are in the OFF position before connec-
tion to a power source or load.
3) Never insert anything other than the supplied power/ recharging cords or
recommended appliance power/ recharging cords into the 12 Volt DC
charging/ power socket on this unit. Do not use any accessory that is not
recommended or provided by the manufacturer.
4) Do not use this unit to operate appliances that draw more than 20 amps.
5) This system is designed to be used only on vehicles with 12 Volt DC battery
systems. Do not connect to a 6 Volt or 24 Volt battery system.
6) This system is not designed to be used as a replacement for a vehicular bat-
tery.
Use th e VECTO R JUMP-START SYSTEM to :
•
Jump-start any engine system with a standard 12 Volt DC battery: boat; truck; car; air-
7) This system has an automatic switch that only powers the jumper cables
when the proper polarity and voltage are sensed. The vehicle battery must
have at least two volts for this feature to operate.
8) Do not attempt to operate a vehicle that does not have a battery installed.
9) Vehicles that have on-board computerized systems may be damaged if vehi-
cle battery is jump-started. Before jump-starting, read the vehicle owner’s
manual
plane; RV; personal watercraft; snowmobile; garden tractor; gasoline engine
generator, etc.
Operate: 12 Volt DC fans, inflators, fluorescent worklights, cellular phones (can
quick-charge a cellular phone by using the phone’s 12 Volt DC adapter cord),
spotlights, TVs, portable radios, cassette or CD players, and more.
Operate: Certain 120 Volt AC Accessories (requires a Vector 12 volt power
inverter, sold separately).
Inflate: Truck and auto tires, sports equipment, beach inflatables. Three different
adapter nozzles allows for inflation of items without a standard tire valve stem.
The easy-to-read lighted pressure gauge assures accurate inflation pressures day
or night.
•
•
to confirm that external-starting assistance is advised.
•
10) Excessive engine cranking can damage a vehicle’s starter motor. If the
engine fails to start after the recommended number of attempts, discontinue
jump-start procedures and look for other problems that may need to be cor-
rected.
The JUMP-START SYSTEM has an easy-to-read series of LED (Light Emitting Diode)
charge indicators that show when the unit is fully charged, or the level of charge
in the battery. Charge level can be viewed when the Charge Status pushbutton
is pressed. A 12 Volt DC accessory socket is provided for use with appliances
that can operate from a vehicle 12VDC accessory outlet. This allows maximum
portability and utility when the Jump-Start System is used in remote locations.
The Jump-Start System can be recharged from any standard 120 Volt AC power
source using the supplied AC Recharge Adapter. The adapter barrel connector
attaches to the Recharge Port on the top panel of the jump-starter. A built-in 12
Volt appliance socket and the appropriate DC/ DC charging/ adapter cord is
used to recharge the battery from another 12 volt DC source. When pressed, the
CHARGE STATUS pushbutton will show the battery power level status on the
Battery Status display (from Low to Full). The green LED full indicator illuminates
when the unit is fully recharged and charging can be discontinued. An ON/ OFF
switch operates the built-in work/ emergency light.
11) Although this unit contains a non-spillable battery, it is recommended that
unit be kept upright during storage, use and recharging. To avoid possible
damage that may shorten the unit’s working life, protect it from direct sun-
light, direct heat and/ or moisture.
12) Check unit periodically for wear and tear. Replace worn or defective parts
immediately. Contact Vector Customer Service department toll-free 866-
584-5504.
13) Do not attempt to jump-start a frozen battery.
14) Never submerge this unit in water.
15) DO NOT over-inflate tires or other inflatables.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
9
2 . USE AS A JUMP-START SYSTEM
WARN IN G:
2
1
10
4
3
14
1. Before using this system to jump-start any vehicle or boat, read and
understand all instructions, safety tips, warnings, cautions and first aid
informa tion provided in this ma nua l a nd on the product la beling.
Additional important information may also be provided by the vehicle’s
battery system manufacturer.
6
5
2. Be aware of first aid procedures before attempting jump-start procedure.
3. Always wear protective eyewear when working with a lead acid-type battery.
4. Do not smoke or use inflammable items (matches, cigarette lighters, etc.) while
working on a vehicle’s battery system.
5. When using this jump-starter in proximity to the vehicle’s battery and engine,
stand the unit on a flat, stable surface, and be sure to keep all cords and
cables away from any moving parts.
6. Check unit periodically for wear and tear. Replace worn or defective parts
immedia tely; conta ct Vector Customer Service Depa rtment toll-free:
7. Do not attempt to jump-start a frozen battery.
7
11
12
8
13
Nozzles
15
8.NEVER submerge this unit in water.
FIGURE 1 A (Front View)
FIGURE 1 B (Rear View)
9. Do not wear vinyl clothing when jump-starting a vehicle, friction can cause
dangerous static electricity sparks. Remove all jewelry or metal objects-they
can cause short circuits or react with battery acid to cause severe burns.
Remove or secure any loose clothing, and restrain long hair, before attempt-
ing jump-start procedure.
9. Non-slip rubber handle
10. Heavy-Duty Welding Quality
Jumper Cables
11. Compressor Power Switch
12. Heavy-Duty Copper Clamps
13. 260 PSI compressor air hose
and tire chuck
14. Analog pressure gauge
15. Inflation adapters (nozzles)
1. Reverse connection indicator
2. Good connection indicator
3. 12 Volt DC accessory socket
with 20 amp overload protection
4. Battery level display
5. Battery level status pushbutton
6. AC/ DC recharge port
10. Lead-acid batteries generate hydrogen gas during normal operation. More
gas is generated when the battery is charging. Hydrogen gas is explosive,
poisonous to breathe and highly flammable.
7. Area work light ON/ OFF switch
8. Area work light
®
Recommendations for optimum performance of the VECTOR jump-starter:
CAUTIO N :
1. To avoid possible damage that may shorten the unit’s working life, protect
this unit from direct sunlight, direct heat and moisture.
2. This system is to be used ONLY on vehicles, boats, garden tractors
and gasoline powered generators with 12 Volt DC battery systems.
3. This system is NOT designed to be installed as a replacement for
a vehicle battery.
4. Vehicles that have on-board computerized systems may be damaged if
vehicle battery is jump-started. Before jump-starting this type of vehicle, read
the vehicle owner’s manual to confirm that external-starting assistance is
advised.
ADDITIO N AL FEATURES
•
Includes non-spillable, maintenance-free, heavy-duty, new high energy density
17 Amp hour, sealed battery
•
Sturdy and unique compact design provides up to 35 hours of completely
portable 12 Volt DC power
•
•
•
•
•
•
Safe to use, transport, and store. Includes an audible polarity alarm
Requires no maintenance (other than recharging) for optimum operation
Automatic taper charge for AC recharge
Audible alarm for reverse polarity
Molded high-impact case is tough and durable
Built-in area/ work light with Ultra bright high intensity LEDs for roadside repairs
and use in remote locations without utility power
5. Excessive engine cranking can damage the vehicle’s starter motor. If the
engine fails to start after the recommended number of attempts, discontinue
jump-start procedure and look for other problems that may need to be cor-
rected.
®
6. This VECTOR jump-starter is equipped with an internal, automatic safety
CAUTIO N : Use only adapters supplied with this unit. Never insert any other
switch. This switch only activates when connections to are correctly made pos-
itive (+) to positive (+) and negative (-) to negative (-). An incorrect connection
will sound an audible alarm indicating an incorrect connection. Should this
alarm sound, remove the clamps and reconnect ensuring proper polarity.
Once the connections are properly made, the internal switch turns on and you
are ready to jump-start the vehicle. This automatic internal safety switch is fully
automatic and requires no action by the user.
adapters into the charging or power receptacles on this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
2 .1 EASY, STEP-BY-STEP JUMP-STARTING INSTRUCTIONS
•
•
There is a risk of explosive gases being released when batteries are charged or
discharged, failure to follow instructions may cause property damage, explosive
hazard, and/ or personal injury.
Always use protective eyewear when using this product: contact with battery
acid may cause blindness and/ or severe burns
This jump-starter is equipped with an automatic ON/ OFF that only allows jump-start
energy to flow when proper connections are made to battery and frame. The auto-
matic ON/ OFF works in conjunction with an audible reverse polarity alarm and a
large red LED. If inadvertent reverse polarity occurs, the alarm will sound and the
red LED will light. Disconnect the black clamp (negative clamp) first, then the red
clamp. Reconnect properly and a green LED will light. Wait one minute and then
turn the key. To recap:
•
•
Keep out of children’s reach.
ALWAYS store battery clamps in built-in storage well when not in use and never
touch battery clamps together, this can cause dangerous sparks, power arcing
and/ or explosion.
CONNECT – Red clamp first, then black clamp.
DISCONNECT – Black clamp first, then red clamp.
N O TE: The automatic safety switch and polarity alarms require the vehicle battery
to have at least 2 volts when the clamps are connected
FIRST AID
•
SKIN: If battery acid comes in contact with skin, rinse immediately with water,
then wash thoroughly with soap and water. If redness, pain, or irritation occurs,
seek immediate medical attention
EYES: If battery acid comes in contact with eyes, flush eyes immediately for a
1. Turn OFF vehicle ignition and all accessories (radio, A/ C, lights, cell
phone, etc.). Place vehicle in park and set the emergency brake.
2. Remove booster clamps from storage location (Figure 1): simply squeeze the
handles and pull up on the clamp.
•
minimum of 15 minutes and SEEK IMMEDIATE MEDICAL ATTENTION
3. Procedure for jump-starting a NEGATIVE GROUNDED SYSTEM (NEGATIVE
BATTERY TERMINAL IS CONNECTED TO CHASSIS).
3 .
CHARGIN G/ RECHARGIN G
3a. Connect positive (+) red clamp to vehicle battery’s positive terminal.
3b. Connect negative (-) black clamp to chassis or a solid, non-moving,
metal vehicle component or body part. Never clamp directly to nega-
tive battery terminal or moving part. If the audible alarm sounds, the
polarity is not correct. Reverse the connections.
For maximum battery life, we recommend the VECTOR® system be kept fully
charged at all times. If the battery is allowed to remain in a discharged state,
battery life will be shortened.
N O TE: Recharging battery after each use will prolong battery life; frequent
discharges between recharges will reduce battery life
IMPO RTAN T:
4. Procedure for jump-starting POSITIVE GROUND SYSTEMS
(NOTE: In the rare event that the vehicle to be started has a Positive
Grounded System (positive battery terminal is connected to chassis) replace
steps 3a and 3b above with steps 4a and 4b, then proceed to steps 5
through 7 below.
•
MAKE SURE ALL SWITCHES ARE TURNED OFF DURING RECHARGING
Charge unit for full 24 hours using AC method, prior to first use
Recharge unit fully after each use
Recharge unit every two months, when it has not been used
•
•
•
4a. Connect negative (-) black clamp to vehicle battery’s negative terminal
4b. Connect positive (+) red clamp to vehicle chassis or a solid, non-mov-
ing, metal vehicle component or body part. DO NOT CLAMP DIRECT-
LY TO POSITIVE BATTERY TERMINAL OR MOVING PART
Figure 2A
AC charger
Figure 2B
DC charger
5. A five (5) second delay is built into this jump-starter unit after the clamp con-
nections are made. This delay is designed to reduce the possibility of spark-
ing upon connection. We recommend waiting one (1) minute after making
the clamp connections prior to attempting to start vehicle.
6. Start vehicle (do not turn key for longer than 3-5 seconds).
7. After vehicle starts, remove clamps (disconnect the frame or engine clamp
first, followed by the battery cable) and replace them in the built-in storage
location. Squeeze the handles and slide the clamp into position and release
your grip.
CAUTIO N :
1. If engine fails to start, leave ignition key turned off. Try again later - the
engine may be flooded.
2. Recharge jump-start system after each use.
3 .1 1 2 0 Vo lt AC Ch a rg in g
1. Simply plug the AC plug of the AC/ DC adapter/ charger into any standard
120 volt AC wall outlet (figure A).
2. Plug the barrel connector attached to the AC/ DC adapter into the small barrel
receptacle on the jump-starter that is marked recharge port.
WARN IN G:
•
Always disconnect the engine or frame jumper clamp first; followed by the battery
jumper clamp
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
3. After initial 24 hour charge, charge this device for at least 14-16 hours or until
the green FULL indicator lights. Charge at least once a month when not in use.
Table II shows the estimated 12 volt DC operation time when using a fully
charged system.
®
4. When charging is completed and the green FULL LED lights, remove the
AC/ DC charger plug and store in a safe place.
Table II - VECTOR as a 12 Volt DC Power Supply
Appliance
Estimated Power Usage
Operating Time
®
N O TE: The unit cannot be overcharged using the AC method. The VECTOR
(Watts)
(hours)
system also comes with a DC/ DC charging adapter for recharging the unit from
a 12 volt DC accessory socket in a vehicle or boat .
Cell phone
1
120 (talk time)
This recharging method will NOT recharge the unit as effectively as recharging
from a 120 volt AC outlet. The 12 Volt DC recharging procedure is recommend-
ed only when it is necessary, as continued use of the 12 Volt DC recharging pro-
cedure may shorten the battery system’s life.
If unit is fully discharged, it is recommended that the vehicle being used for recharging
be left running while the unit is being charged via the 12 Volt DC method.
Fluorescent light
4
40
24
14
10
2
Radio, fan, depth finder
Camcorder, VCR, spotlight
Power tools, bilge pump
Car vacuum
9
15
24
80
WARN IN G:
N O TE: ALL TIMES ARE APPRO XIMATE AND BASED UPO N
A
FULLY
CHARGED UNIT.
Do not recharge for more than 3-4 hours maximum using 12 Volt DC method
5 .
EMERGEN CY W O RKLIGHT
3 .2 1 2 Vo lt DC Ch a rg in g
The Worklight is controlled by a sliding On/ Off switch located on the domed part
of the light assembly. Make sure the lamp is turned OFF when the unit is being
recharged or stored. The lamp is efficient and will operate up to 114 hours on a
full charge. The lamp is designed to last the life of the product.
1. Insert one end of the DC/ DC charging adapter into a 12 Volt DC accessory
receptacle on the vehicle or boat (figure B)
2. Insert the plug at the other end of this charging adapter into the 12 Volt DC
accessory socket on the front of the unit.
6 .
AIR CO MPRESSO R/ TIRE IN FLATO R
3. Charge the unit until the green FULL indicator lights when the battery status
level pushbutton is pressed. DO NOT EXCEED 3-4 HOURS MAXIMUM.
IMPO RTAN T: Read Instructions Carefully To Avoid Possible Injury Or Property
4. When charging is completed, remove the charging cord and store in a safe
place.
Damage.
The built-in 12 Volt DC air compressor is the ultimate compressor for all vehicles,
trailer tires and recreational inflatables. Three different sized nozzles are sup-
plied. Each nozzle will clip on the end of the standard tire valve connector locat-
ed at the free end of the compressor hose. The compressor nozzles are stored
inside the hose well. The compressor hose with tire fitting is stored in a retaining
well between the jumper cable channels on the rear of the unit. The compressor
can operate long enough to fill up to 3 average sized tires before the battery must
be recharged.
3 .3 Estim a te d Ba tte ry Life
Table I shows the relationship of the frequency of use between recharging and
the expected number of discharge/ recharge cycles.
Table I - Estimated Battery Life between recharges (lifetime of unit’s battery)
Use
1
Re ch a rg e s
1000+
700+
5
The compressor may be used by removing the air hose from the storage well and
if required, fitting an appropriate nozzle to the air hose. An On/ Off switch locat-
ed on the rear of the unit controls the power to the compressor and the gauge
light. Refer to Figure 3 for locations of compressor hose, nozzle storage hatch
and hose. Return hose to the storage compartment after use.
10
500+
4 .
OPERATION AS A 1 2 VOLT PORTABLE POWER SUPPLY
1. Lift up the cover of the unit’s 12 Volt DC accessory receptacle (See Figure 1)
2. Insert the 12 volt DC plug from the appliance into the receptacle on the unit.
3. Switch on the appliance, and operate as usual.
6 .1 Wa rn in g s fo r co m p re sso r u se
The compressor is capable of inflating up to 260 pounds per square inch (psi)
pressure. To avoid over-inflation, carefully follow instructions on articles to be
inflated. Never exceed recommended pressures. Bursting articles can cause seri-
ous injury. Always check pressure with the pressure gauge. Never leave com-
pressor unattended while in use. Allow unit to cool after 10 minutes of continu-
ous operation.
CAUTIO N :
DO NO T USE THIS UNIT TO O PERATE APPLIANCES THAT DRAW MO RE
THAN 2 0 AMPS DC
Download from Www.Somanuals.com. All Manuals Search And Download.
9
10
6 .2 Tire in fla tio n o r p ro d u cts w ith a va lve ste m
1. Place connector (chuck) on valve stem.
7 . REPLACEMEN T PARTS
For replacement parts (batteries, nozzles, etc.), contact Vector Customer Service:
(954) 584-4446 or toll-free (866) 584-5504.
2. Push connector toward valve stem and close thumb latch.
7 .1 Ba tte ry re p la ce m e n t
It is recommended that the unit be returned to Vector Customer Service for bat-
tery replacement: Contact (954) 584-4446 or toll-free (866) 584-5504.
3. Make sure connector is pushed onto valve stem as far as possible before clos-
ing thumb latch.
4. Check pressure with the pressure gauge.
WARN IN G:
5. When desired pressure is reached, turn OFF Compressor Power Switch.
6. Open thumb latch and remove connector from valve stem.
7. Store compressor hose and tire fitting in storage compartment.
• Do not dispose of the battery in fire as this may result in an explosion
• Before disposing of the battery, protect exposed terminals with heavy-duty
electrical tape to prevent shorting (shorting can result in injury or fire)
IMPO RTAN T: Always leave the thumb latch in the open position when
• Do not expose battery to fire or intense heat as it may explode
storing unit.
7 .2 Ba tte ry d isp o sa l:
This unit contains a maintenance-free, non-spillable, sealed lead-acid
6 .3 In fla tin g o th e r a rticle s (w ith o u t va lve ste m )
battery.
Inflation of other items requires use of one of the adapters (nozzles).
1. Open the hatch and remove the nozzles noting their storage positions.
2. Insert appropriate adapter (e.g. needle) into connector (chuck) and close
thumb latch.
3. Refer to Table III, Typical Inflation Times, for approximate filling pressure and
time. Small items such as volleyballs, footballs, etc. inflate very rapidly.
4. Insert adapter (e.g. needle) into item to inflate to appropriate pressure.
5. Turn ON compressor switch - inflate to desired pressure or fullness (refer to
paragraph 6.4).
This battery is fully recyclable and should be accepted at any location that
accepts common automotive starter batteries. Examples of places that accept
these batteries are: County or municipal recycling drop-off centers, scrap metal
dealers and retailers who sell automotive replacement lead acid starter batter-
ies. For more information on recycling this battery, call toll-free (877) 288-
7722.
8 . SPECIFICATIO N S
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VEC012APC
Boost Ampere . . . . . . . . . . . . . . . . . . .450 Instantaneous Cranking Amps
Peak Ampere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200 Amps
Continuous Cranking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250 Amps
6. Turn off compressor switch.
7. Remove adapter from item.
6 .4 Ty p ica l in fla tio n tim e s
The following are approximate pressure and inflation times for various items.
Battery Type . . . . . . . . . . . .Sealed, high energy density, AGM, lead-acid,
rechargeable, maintenance-free, 12 volt DC,
17 Amp-hour
WARN IN G: Always follow tire manufacturers recommendations for pressure on
item to be inflated.
Area Light . . . . . . . . . . . . . . . . . . . . . . . . . . . .Long life, ultra bright LEDs
Table III
Booster Cables . . . . . . . . . . . . . . . . . . . . .Heavy duty welding cable with
450 Amp copper clamps
Inflatables
Inflation pressure (psi)
Filling time
Vehicle and trailer tires
Accessory Socket . . . . . . . . . . . . . . . . . . .Self-Resetting Breaker 20 Amps
Air Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260 PSI
Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Lighted Analog
DC Charging Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Volt DC
AC Charging Adapter . . . . . . . .120 Volt AC (700mA, 12 Volt DC Output)
Reverse Polarity Detection . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Volts (min)
HEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12.75 in. (32.39 cm)
DEPTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.75 in (19.69 cm)
WIDTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.0 in (27.94 cm)
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16.4 lb. (7.44 Kg)
155/ 80R 13” . . . . . . . . . . . . . . . . . . . . .26 . . . . . . . . . . . . . .2.5 min
185/ 70R 14” . . . . . . . . . . . . . . . . . . . . .30 . . . . . . . . . . . . . .4.5 min
235/ 75R 15” . . . . . . . . . . . . . . . . . . . . .30 . . . . . . . . . . . . . .6.5 min
235/ 85R 16” . . . . . . . . . . . . . . . . . . . . .50 . . . . . . . . . . . . . .16 min
Bicycle tires 27” X 1” (racing) . . . . . . . . . .10 . . . . . . . . . . . . . .40 sec.
Football . . . . . . . . . . . . . . . . . . . . . . . . .13 . . . . . . . . . . . . . .24 sec.
Basketball . . . . . . . . . . . . . . . . . . . . . . . .9 . . . . . . . . . . . . . . .20 sec.
Volleyball . . . . . . . . . . . . . . . . . . . . . . . .5 . . . . . . . . . . . . . . . .6 sec
Download from Www.Somanuals.com. All Manuals Search And Download.
11
12
|