Project
Item
Quantity
CSI Section 11400
Approval
Date
W100PL Food Mixer
Models
W100PL
Standard Features
Options &
Accessories
• Powerful 4 hp motor
• Variable speeds from 50 to 250 RPM
40-qt. bowl and accessories
60-qt. bowl and accessories
Bowl scraper in 100-qt., 60-qt.
and 40-qt. sizes
Stainless steel wing whip
Pastry knife
Mark IV programmable
controls
Ergo (tall column)
• Power Bowl Lift.
• Overload protection and no voltage
release
• No bowl adaptors required for the down-
size bowls
• Locking pin on tools instead of shaft.
• Neoprene feet to minimize walking and
rusting
• Permanently lubricated planetary head
and attachment hub case
• 15-minute timer with HOLD feature
• Stainless steel 100-qt. bowl, wire whip
and dough hook
• Alloy flat beater
• Bowl Truck with Handle
Specifications
Mixing system
steel. Bayonet shaft in stainless steel. Variable
speed V-belt transmission based on precision
machined cast iron pulleys. Springloaded
moveable pulleys in the variable speed drive
for automatically adjusting of the tension of
the special V-belt. Planetary mixer head of
unique design. The planetary head revolves in
heavy-duty ball and needle bearings around
the main shaft. Precision milled beveled gear
on the main shaft engages the bayonet shaft
and the fixed internal gear ring through a
double set of milled gears obtaining extra high
torque capabilities of the mixing tools.
Precision milled cast iron bowl arms lower and
raise the bowl and clamp it in a precise position
relative to the mixing tool allowing for small
tolerances between tool extremities and the
bowl.
The VARIMIXER W100PL is a planetary mixer
with a variable speed drive system. The mixer
frame consists of a column with welded-on
feet, and a top traverse closed by a stainless
steel cover.
The bowl is mounted in bowl arms which are
manually raised and locked simultaneously - or
lowered and opened, respectively. The column
contains the motor and the bowl arm mecha-
nism. The top traverse contains the transmis-
sion system consisting of the moveable pulleys,
the intermediate belt drive and the planetary
head. Start and stop push buttons are mounted
on the frontplate along with a 15-minute
electrical timer with a HOLD feature. Mixing
tools are mounted in a bayonet shaft in the
planetary head.
Construction
Mixer frame of heavy-gauge, welded, rolled
steel plate. Durable powder coated finish
used on those surfaces not constructed of
stainless steel. Top cover, splash apron and
planetary head cap in heavy-gauge stainless
steel. Molded PVC feet pads. Bowls in stainless
steel. Mixing tools in cast aluminum or stainless
5489 Campus Drive
Shreveport, LA 71129 USA
Tel: 318-219-7051
Tel: 1-800-222-1138
Fax: 318-635-3131
Bulletin No. W100PL 09/07
E-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|