ISSUE 1
VIP-822
DUAL NETWORKED TRUNK PORT
INTRODUCTION
The VIP-822 Dual Networked Trunk Port allows
most loop start terminal devices to be connected to
a managed IP-based LAN/WAN.
SPECIFICATIONS
Access Methods
• PBX, FXS Port
Features
Nominal Power Requirements
• RJ-45 for network connection
• 2 RJ-11 FXO connections
• 2 RJ-11 failover telephone connections
• Decode Caller ID signals
• Front panel activity LED
• Network activity LEDs
• 2.5mm jack for DC power
• 802.3af compliant
Via back panel barrel connector:
Voltage:
Current:
24VDC
325mA
Via 802.3af PoE Ethernet Switch:
802.3af:
Class 3
Environment
Temperature:
0 to +40° C
Humidity:
0 to 85% non-precipitating
Dimensions/Weight
Packing List
• 1.75 H x 6.75" W x 9.5" D
(4.45cm H x 17.15cm W x 24.13cm D)
• Weight: 1.75 lbs. (0.80 kg)
Qty
1
1
Item
VIP-822
VIP-101 Setup CD
VSP Document
Mounting Brackets
Rubber Feet
1
2
4
Nominal Specifications
Input Impedance:
Input Level:
600 Ohms
-10dBm
6
1
Wood Screws
RJ-45 Patch Cables
Output Impedance:
Output Level:
600 Ohms
- 10dBm nominal
1
947998
Download from Www.Somanuals.com. All Manuals Search And Download.
LINK: Indicates 100 Mbit Ethernet connection
when illuminated. No activity indicates 10 Mbit
connection.
Signal Connections
Trunk Connections:
Connect standard analog telephones to the
VIP-822 via the rear panel RJ-11 jacks labeled
Port 1 Line or Port 2 Line. Tip and Ring appear on
pins 3 and 4 of these jacks.
ACT: Indicator flashes to indicate network activity.
ED
TECHNICAL ASSISTANCE
Failover Telephone Connections:
Connect standard analog telephones to the
VIP-822 via the rear panel RJ-11 jacks labeled
Port 1 Phone or Port 2 Phone. Tip and Ring
appear on pins 3 and 4 of these jacks.
When trouble is reported, verify power is being
supplied to the unit and there are no broken
connections. Check voltages for proper polarity to
the one-way amplified speakers. If a spare unit is
available, substitute a spare unit for the suspected
defective unit.
Assistance in troubleshooting is available from the
factory. Call (540) 563-2000 and press 1 for
Technical Support or via email at
Front Panel
When requesting assistance, you should include
all available information. It is strongly suggested
that you go to the website and follow the trouble
Valcom equipment is not field repairable. Valcom,
Inc. maintains service facilities in Roanoke, VA.
Should repairs be necessary, attach a tag to the
unit clearly stating your company name, address,
phone number, contact person and the nature of
the problem. Send the unit to:
Rear Panel
Status Indicator Lights
The VIP-822 has 3 status indication lights on the
front panel.
Valcom, Inc.
Repair & Return Dept.
5614 Hollins Road
STATUS: Flashes then illuminates to indicate
Roanoke, Va. 24019-5056
power.
VALCOM LIMITED WARRANTY
Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a
period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund of any
such defective device within the warranty period, provided that:
1.
2.
3.
inspection by Valcom, Inc. indicates the validity of the claim;
the defect is not the result of damage, misuse or negligence after the original shipment;
the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus
parts and labor will be applied to units defaced or physically damaged);
4.
5.
freight charges for the return of products to Valcom are prepaid;
all units ‘out of warranty’ are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to
additional charges for parts and labor).
This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any
anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation or
use of the product.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should
be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.
3
947998
Download from Www.Somanuals.com. All Manuals Search And Download.
|