|
Table of contents
Parts checklist...................................................................1
Installation.........................................................................2
Headset jack ...................................................................15
Operating range..............................................................16
New voice mail................................................................16
Clear voice mail alert ......................................................17
Call transfer.....................................................................17
Directory..........................................................................18
Store a directory entry ....................................................18
Edit a directory entry.......................................................19
Erase a directory entry....................................................20
Move a directory entry to the speed dial ........................20
Dial a directory number...................................................21
Speed dial ......................................................................22
Store a speed dial entry..................................................22
Edit a speed dial entry ....................................................23
Delete a speed dial entry................................................24
Dial a speed dial number................................................24
Reassign locations in speed dial....................................24
Caller ID ..........................................................................25
About call history (caller ID)............................................26
Review call history ..........................................................26
Delete records from call history......................................27
Delete a specific call..................................................27
Delete all calls............................................................27
Dial a displayed number .................................................27
Store a call history record in the directory......................27
Display screen messages...............................................28
Battery information .........................................................30
Connect power and telephone line cords.........................2
Choose location ................................................................3
Install handset battery.......................................................3
Wall mounting bracket installation....................................4
Desk/table bracket installation..........................................4
Check for dial tone............................................................5
Charge the handset battery..............................................5
Language ..........................................................................5
Set the dial mode..............................................................5
Set handset date and time................................................5
Handset ringer style/battery save.....................................6
If you subscribe to DSL service:.......................................6
Belt clip..............................................................................7
Telephone operation .........................................................8
Handset layout ..................................................................8
Telephone base layout......................................................9
Handset operation...........................................................10
Telephone base operation ..............................................12
Set language...................................................................13
Set dial mode ..................................................................13
Set handset date and time..............................................13
Check for dial tone..........................................................14
Charge the handset battery............................................14
Handset ringer style/battery save...................................14
Set ringer volume............................................................14
Temporary tone dialing ...................................................15
Battery care and maintenance........................................30
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Important! Before using this telephone, you
must read the Important safety ꢀnstruc-
tꢀons on page 42 of this manual.
NEED HELP?
This manual has all the feature operations and troubleshooting you need to install
and operate your new VTech telephone. Please take the time to review thoroughly
to ensure proper installation of this VTech innovative and feature rich product.
shopping, and everything new at VTech.
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts checklꢀst
•
•
•
•
•
•
•
•
•
•
•
Handsets (2)
Telephone base
Base power adapter
Charger power adapter
Charger
Desk/wall mount bracket
Batteries (2)
Battery covers (2)
Belt clips (2)
Telephone line cord
User’s manual
•
Important!
Before using
this telephone,
please read
Important safety
ꢀnstructꢀons on
page 42.
Charger power adapter
Base power adapter
Telephone base
with desk /wall
mount bracker
To pur c hase replac ement
batteries, visit us on the web at
1-800-595-9511. In Canada, go to
1-800-267-7377.
Handsets (2)
Charger
Belt clips (2)
Battery covers (2)
Batteries (2)
Telephone
line cord
User’s manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
Installatꢀon
Connect power and telephone lꢀne cords
Install the telephone base and the charger as shown below. Choose a central location within the home,
away from any electronic equipment and appliances such as personal computers, computer routers,
television sets, microwave ovens, and refrigerators. Avoid excessive heat, cold, dust or moisture.
•
Install the telephone
base away from
electronic equipment
such as personal
computers,
television sets or
microwave ovens.
Avoid excessive
heat, cold, dust or
moisture.
Plug the telephone line cord
into a telephone jack.
•
•
•
Connect the power
and telephone
Modular
telephone jack
Standard
electrical outlet
line cords to the
underside of the
base as illustrated.
Plug the AC adapter
into an electrical
outlet. Connect the
telephone line cord
to the wall jack.
This power unit
is intended to be
correctly orientated
in a vertical or floor
mount position.
The prongs are not
designed to hold
the plug in place if
it is plugged into a
ceiling or an under
the table/cabinet
outlet.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installatꢀon
Choose locatꢀon
For maximum performance of your
cordless telephone system:
1. Chooseacentrallocationforyour
telephone base.
Install handset battery
•
•
Use only the
provided VTech
battery, or equivalent.
To purchase
2. Install your telephone base and
extension handsets away from
electronic equipment, such as
personal computers, television
sets and microwave ovens.
3. In locations where there are
multiple cordless telephones,
separatethetelephonebasesas
much as possible.
4. Installyourtelephoneequipment
away from heat sources and
sunlight.
5. Avoid excessive moisture, dust
or extreme cold.
replacement
batteries, visit us
on the web at www.
vtechphones.
com or call us at
1-800-595-9511. In
Canada, go to www.
vtechcanada.com or
call us at 1-800-267-
7377.
a) Align the two holes in the plug with the socket pins in the
handset battery compartment, matching the red and black
wires to the color-coded label. Snap the plug into place.
Put the battery into the compartment.
1
b) Place the battery in the compartment with the wires tucked
inside.
c) Replace cover by sliding it up into place.
d) Place the handset in its base when not in use to ensure
maximum daily performance.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ
Installatꢀon
Wall mountꢀng bracket ꢀnstallatꢀon (optional)
Yourtelephonebasecomeswiththewallmounting/desktopbracketinstalled,readyfordesktopuse.Ifyou
prefer to mount your telephone on the wall (optional), it is designed to mount on a standard telephone
wall plate. For wall mounting, follow these instructions:
• First, insert the lower portion tabs of the wall mounting/desktop bracket into the lower grooves in
the telephone base, then snap the upper portion tabs of the bracket into place.
• Mount the telephone base on the wall by positioning it so the mounting studs will fit into the holes
on the telephone base and wall mounting/desktop bracket. Slide the telephone base down on the
mounting studs until it locks into place.
• To remove the bracket, press both upper portion tabs firmly inward and pull the bracket downward
until it release from the grooves.
upper portion tab
lower portion tab
lower groove
upper grooves
Desk/table bracket ꢀnstallatꢀon
To place your telephone base on a desk or table, insert the
wall mounting/desktop bracket.
• Insert the lower portion tabs of the bracket into the upper
grooves of the telephone base.
• Snap the upper portion tabs of the bracket into place.
• To remove the bracket, press both upper portion tabs
firmly inward and pull the bracket upward until it is
released from the grooves.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installatꢀon
Check for dꢀal tone
After the batteries are charged, pick up the handset and press TALK/FLASH; you should hear a dial
tone. If you do not, refer to the Troubleshootꢀng section in the back of this user’s manual.
•
•
If the phone will
not be used for a
long period of time,
remove the battery
to prevent battery
damage.
If you have any
trouble installing
your phone, please
visit our website at
com.InCanadagoto
com.
Charge the handset battery
If battery power is low, NEEDS RECHARGING will appear on the handset. Charge the battery for
at least 16 hours the first time.
Language
• Press PROG, then press or until LANGUAGE is displayed. Press SELECT.
• The current setting blinks. Press or until the screen displays the correct language (English,
Espanol, Francais).
• Press SELECT to save your selection.
Set the dꢀal mode
If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you
have pulse (rotary) service, you’ll need to change the dial mode.
• Press PROG.
• Press or until the screen displays DIAL MODE: and the current setting.
• Press SELECT. The current setting blinks.
• Press or to select TONE or PULSE.
• Press SELECT to save.
Set handset date and tꢀme
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press or until DATE/TIME is displayed.
• Press SELECT. The month is flashing. Press or until the screen displays the correct month.
• Press SELECT. The day is flashing. Press or until the screen displays the correct day.
• Press SELECT. The hour is flashing. Press or until the screen displays the correct hour.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅ
Installatꢀon
• Press SELECT. The minute is flashing. Press or until the screen displays the correct minute.
• Press SELECT. AM or PM is flashing. Press or to choose between AM or PM. Press
SELECT.
•
In the event the
battery loses all
of its power or is
removed, the time
setting will be lost.
Handset rꢀnger style/battery save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
1. With the handset in idle (off) mode, press PROG.
2. Press or until the screen displays RINGER: and the current setting.
3. Press SELECT. The current setting blinks, and you will hear a sample of the ring.
4. Press or to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
5. Press SELECT to choose the displayed ringer setting.
If you subscrꢀbe to DSL servꢀce:
If you receive high speed internet service through your phone line (commonly referred to as DSL)
and you are experiencing interference during conversations and/or your caller ID features aren’t
functioning properly, install a DSL filter to the telephone line between the telephone base and the
telephone line jack. Contact your DSL provider to obtain a DSL filter.
To single telephone jack
(RJ11C)
Telephone line cord
DSL filter (For DSL users)
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installatꢀon
Belt clꢀp (optional)
To remove
To attach
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢇ
Telephone operatꢀon
Handset layout
1. TALK
2. FLASH
3. CHAN (channel)
4. REMOVE
5. Answer a call
6. /CID VOL-
/VOL+
6
1,2
8
7
7. SELECT
8. OFF
5
9. REDIAL/PAUSE
10.PROG (program)
3,4
9
10
ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operatꢀon
Telephone base layout
11. CHARGE/IN USE
12. Message waiting indicator
13. FIND HANDSET
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢉ
Telephone operatꢀon
Handset operatꢀon
Makꢀng Calls
•
Press TALK/FLASH, then dial the number.
— OR —
Dial the number (press then press CHAN/REMOVE to backspace), then press TALK/FLASH.
•
Whenever the
phone is in use,
call timer will be
shown at the top
right corner.
• To answer a call, press TALK/FLASH.
• To end a call, press OFF.
Endꢀng calls
• Press OFF to end your call.
— OR —
Put the handset on the telephone base or charger to end your call.
Answerꢀng calls
• Press any key to answer a call (except OFF, or ).
FLASH
• During a call, press TALK/FLASH to receive an incoming call, if call waiting is activated.
CHAN
• Press CHAN to switch to a clear channel while on a call.
REMOVE
• When viewing the call log, press to delete the current record displayed. While handset is in idle
mode, press and hold to delete all records in the call log.
/CID VOL- and /VOL+
/CID VOL-
•
While on a call, press to decrease the volume. A double beep will sound when you reach the
lowest setting.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operatꢀon
•
•
While phone is not in use, press to display caller ID information.
While entering names or numbers into memory, press then press CHAN/REMOVE to delete
last character entered.
/VOL+
• While on a call, press to increase the volume. A double beep will sound when you reach the highest
setting.
• While phone is not in use, press to display directory entries.
• While entering names, press twice to add a space.
SELECT
• Press to confirm an entry of operation, or to select highlighted item from menu.
OFF
• During a call, press to hang up. While using menu, press to cancel an operation or exit the menu
display
REDIAL/PAUSE
• Press to view redial number. Press it again to delete the redial number. Press to insert a dialing
pause while entering a number.
PROG
• With the handset in idle (on-hook), press to enter the program setting mode.
Volume
• During a call, press or to adjust the listening volume to a comfortable level.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢁ
Telephone operatꢀon
Telephone base operatꢀon
CHARGE/IN USE
• Flashes slowly when the handset is in use.
• Glows steadily when the handset is charging in its base.
• Flashes in unison with an incoming call.
•
During a page, if
you press OFF on
a handset, it will
cancel the page on
that handset only,
the other handset
will continue to page
for 60 seconds.
Voꢀce maꢀl ꢀndꢀcator
• If you subscribe to telephone company voice mail with a visual message waiting signal, this light
flashes, NEW VOICEMAIL and an icon will also display on the handset screen when you have
voice mail waiting.
FIND HANDSET
• Press to page the handset. Press again, press OFF on handset, or place handset in the telephone
base to cancel the page.
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operatꢀon
Language
• Press PROG, then press or until LANGUAGE is displayed. Press SELECT.
• The current setting blinks. Press or until the screen displays the correct language (English,
Espanol, Francais).
• Press SELECT to save your selection.
Set dꢀal mode
If you have touch tone service, the phone is ready to use as soon as the battery is charged. If you
have pulse (rotary) service, you’ll need to change the dial mode.
• Press PROG.
• Press or until the screen displays DIAL MODE: and the current setting.
• Press SELECT. The current setting blinks.
• Press or to select TONE or PULSE.
• Press SELECT to save.
Set handset date and tꢀme
If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call. If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press or until DATE/TIME is displayed. Press SELECT.
• The month is flashing. Press or until the screen displays the correct month. Press SELECT.
• The day is flashing. Press or until the screen displays the correct day. Press SELECT.
• The hour is flashing. Press or until the screen displays the correct hour. Press SELECT.
• The minute is flashing. Press or until the screen displays the correct minute. Press
SELECT.
• AM or PM is flashing. Press or to choose between AM or PM. Press SELECT.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢃ
Telephone operatꢀon
Check for dꢀal tone
After the batteries are charged, pick up the handset and press TALK/FLASH; you should hear a dial
tone. If you do not, refer to the Troubleshootꢀng section in the back of this user’s manual.
Charge the handset battery
The battery may have enough power to allow for short calls. If the battery power is low, NEEDS
RECHARGING will appear on the handset screen. For best performance charge the battery for at
least 16 hours the first time.
Handset rꢀnger style/battery save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
1. With the handset in idle (off) mode, press PROG.
2. Press or until the screen displays RINGER: and the current setting.
3. Press SELECT. The current setting blinks, and you will hear a sample of the ring.
4. Press or to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
5. Press SELECT to choose the displayed ringer setting.
Set rꢀnger volume
You can select from two different handset ringer volume, or turn the ringer off.
1. Begin with the handset in idle (off) mode.
2. Press and hold or until the screen displays OFF LOW HIGH.
3. The current setting blinks, and you will hear a sample of the ring volume.
4. Press or to select ringer volume: OFF/LOW/HIGH. You will hear a sample of each ring tone.
5. Press SELECT to choose the displayed ringer setting.
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operatꢀon
Temporary tone dꢀalꢀng
If you have pulse (rotary) dialing, you can change from
dial pulse to touch tone dialing by pressing TONE*. This
is useful if you need to send touch tone signals for access
to telephone banking or long distance services.
•
The temporary tone
feature is useful if you
need to send touch
tonesignalsforaccess
to telephone banking
or long distance
1. Press TALK/FLASH.
2. Press TONE*.
3. Dial the number.
services.
4. When you end the call by pressing OFF, the phone
automatically returns to pulse dialing.
Headset jack
You can use this telephone handsfree when you install
any VTech 2.5 mm headset, purchased separately.
Plug the headset into the jack located on the right side
of the handset (under the small rubber flap). Do not force
the connection, but make sure the plug fits securely.
SELECT
To purchase a headset, visit us on the web at www.
vtechphones.com or call us at 1-800-595-9511. In
800-267-7377.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢅ
Telephone operatꢀon
Operatꢀng range
This cordless telephone operates within the maximum power allowed by the Federal
Communications Commission (FCC). Even so, this handset and telephone base can communicate
over only a certain distance — which can vary with the locations of the telephone base and handset,
the weather, and the construction of your home or office.
If you receive a call while you are out of range, the handset might not ring or if it does ring, the call
might not connect when you press TALK/FLASH. Move closer to the telephone base, then press
TALK/FLASH to answer the call.
If you move out of range during a phone conversation, you might hear noise or interference. To improve
reception, move closer to the telephone base.
If you move out of range without pressing OFF, your phone will be left off the hook. To hang up
properly, walk back into range, periodically pressing OFF.
•
•
For clearer reception
while on a call, press
the CHAN button
until any interference
is eliminated.
Turning off the
voice mail indicator
only turns off the
NEW VOICEMAIL
message on all
handsets; it does
not delete your voice
mail message(s).
Use this feature
when the phone
indicates there is
voice mail when
you have none, or
you have accessed
your voice mail from
a different phone
line (while away
from home). If there
actually is a new
voice mail message,
your local telephone
company will
New voꢀce maꢀl
Your phone is designed to work with most local and regional telephone service provider’s voice
messaging systems, providing alerts on both the handset and telephone base when new messages
come in.
Voice messaging is subscription service, available through most service providers, for a monthly
fee. Contact your local telephone company for more information.
When a caller leaves a message in your voice mailbox, the VOICEMAIL light on the telephone base
will flash. In addition, the handset will display:
NEW VOICEMAIL
continue to send the
signal to turn on the
NEW VOICEMAIL
message.
5:40 PM
5/01
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operatꢀon
Clear voꢀce maꢀl alert
If after you review your message(s) your message waiting alert does not go off, you may manually
turn it off by:
1. Press PROG.
2. Press or until screen displays CLR VOICEMAIL.
3. Press SELECT, the screen displays:
•
•
Only one handset
can be on a call at a
time. For example,
if HS1 is on a call
and HS2 presses the
TALK/FLASH button,
OTHER HANDSET
ON OR OUT OF
RANGE will display.
If the HS2 cannot
be found, HS1 will
emit an error tone
and continue the call
automatically. Before
HS2 answers, HS1
can press TALK/
FLASH to cancel the
forward function and
continue the external
call.
CLEAR? YES
4. Press or to select YES or NO.
5. Press SELECT to choose the desired setting. You’ll hear a confirmation tone.
Call transfer
An external call can be forwarded from one handset (HS1) to the other handset (HS2) by following
these steps:
•
If HS2 doesn’t
1. While on a call, press SELECT on HS1 to forward the call to HS2.
respond within 30
seconds, HS1 will
start ringing until
HS1 will show:
HS2 will ring and show:
TALK/FLASH is
CALL TRANSFERRED
TRANSFERRED CALL
pressed to pick up the
returned call. If it is
not answered within
another 30 seconds,
the external call will
end automatically.
2. Press TALK/FLASH on HS2 to answer the forwarded call. HS1 will return to the idle mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢇ
Dꢀrectory
Your phone can store 20 (including the nine speed dial entries) telephone numbers with names (up
to 15 characters for the name and 24 digits for the number in each location) in the handset.
•
•
Press OFF at any
time to exit the
directory.
When the memory
is full the screen
will display
Store a dꢀrectory entry
1. Press PROG. The screen displays DIRECTORY.
2. Press SELECT. The screen displays ENTER NAME.
3. Using the chart below, enter up to 15 characters for the name you’re storing with the number.
Press then press CHAN/REMOVE to backspace and make corrections; press to advance or
press it twice to add a space.
MEMORY FULL,
an error tone
sounds and you
will not be able
to store a new
number until you
delete a stored
number to make
room for another
entry.
If the directory is
empty and you
try to access it,
DIRECTORY
EMPTY will show
on the screen.
When you reach
the end of the list
in the directory,
END OF LIST will
be shown on the
screen.
Characters by number of key presses
Dial Key
Once
Twice
3 Times
4 Times
5 Times
6 Times
1
A
D
G
J
1
2
3
4
5
6
7
8
9
0
*
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
L
•
•
M
P
T
O
R
V
Y
7
9
W
0
*
&
‘
,
-
.
#
#
4. When you finish entering the name, press SELECT or PROG. The screen displays
ENTER NUMBER.
ꢁꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Dꢀrectory
5. Enter the telephone number. Press
to backspace and make corrections.
thenpressCHAN/REMOVE
Press REDIAL/PAUSE to store a pause (a P will be shown) if necessary.
— OR —
Press REDIAL/PAUSE to display the last number dialed from this handset.
6. Press SELECT or PROG. The screen displays DISTINCT RING? and the current setting.
7. Press or to choose Y (yes) if you wish the phone to alert you to calls from this number by
changing to a distinctive ringer after the first ring. Choose N for a normal ringer.
•
When using the
dial pad key(s)
to search for a
directory entry
and there is not
an entry for that
letter, NO DATA
will display on the
handset.
8. Press SELECT or PROG to confirm. If you chose Y in Step ꢇ, a
will be displayed with the
directory entry.
•
Each handset
directory is
Edꢀt a dꢀrectory entry
1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
— OR —
independent of the
other handsets. If
you make entries
or changes to the
directory of one
handset they will
not be reflected in
the other handsets.
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press SELECT. Then press or until
EDIT flashes.
SPEED EDIT ERASE
8005959511
4. Press SELECT. The screen displays the name and number. The cursor appears at the beginning
of the name. Use
on to edit the number. Press
Press SELECT to confirm and move to edit the distinctive ring setting.
and the dial pad keys to edit the name. Press SELECT to confirm and move
,
to backspace and make corrections.
then press CHAN/REMOVE
5. Press SELECT to save the edited information.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢉ
Dꢀrectory
Erase a dꢀrectory entry
1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
— OR —
Press the dial pad key for the first letter of the entry you want to delete.
3. When the screen displays the entry you want to delete, press SELECT. Then press or until
ERASE flashes.
SPEED EDIT ERASE
8005959511
4. Press SELECT. The screen displays ERASE NO YES and the number. The current choice
flashes.
5. Press until YES flashes.
6. Press SELECT. You’ll hear a confirmation beep.
Move a dꢀrectory entry to the speed dꢀal
1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
— OR —
Press the dial pad key for the first letter of the entry you want to move.
3. When the screen displays the entry you want to move, press SELECT. Then press or until
SPEED flashes.
SPEED EDIT ERASE
8005959511
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Dꢀrectory
4. Press SELECT. The screen displays ENTER ꢁ-ꢉ.
5. Press the key (1-9) to move this entry from the normal directory to the speed dial memory and
assign the memory location. You’ll hear a confirmation beep. A memory location number (1
through 9) will be displayed with this entry.
Dꢀal a dꢀrectory number
1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
— OR —
Press the dial pad key for the first letter of the entry you want to dial.
3. When the screen displays the entry you want to dial, press TALK/FLASH.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢁ
Speed dꢀal
Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each
location) into the speed dial memory locations you assign (1 through 9). You can also store telephone
numbers with names alphabetically in the directory. See the Dꢀrectory section for instructions.
•
The entries you stored
in speed dial memory
will be marked with
01 through 09 in the
telephone directory.
Press OFF at any
time to exit speed
dial mode.
Store a speed dꢀal entry
1. Press PROG on the handset.
2. Press or until the screen displays SPEED DIAL.
3. Press SELECT. The screen displays ENTER ꢁ-ꢉ.
4. Press the key (1 through 9) for the memory location where you want to store this entry. The screen
displays ENTER NAME.
•
•
When memory is full
the screen displays
5. Using the chart below, enter up to 15 characters for the name you’re storing with the number. An
error tone will sound if you try to enter more than 15 characters. Press
to backspace and make corrections; press to advance or press it twice to add a space.
MEMORY FULL, an
error tone sounds,
and you cannot
store a new number
until you delete a
record in speed
dial memory or the
directory.
If the locations is
not empty, your new
entry will be stored
in place of the old
and the entry will be
moved to a directory
location.
The entries you
stored in the speed
dial/directory are
independent from
other handset.
thenpressCHAN/REMOVE
Characters by number of key presses
Dial Key
Once
Twice
3 Times
4 Times
5 Times
6 Times
1
A
D
G
J
1
2
3
4
5
6
7
8
9
0
*
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
•
•
L
M
P
T
O
R
V
Y
7
9
W
0
*
&
‘
,
-
.
#
#
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed dꢀal
6. When you finish entering the name, press SELECT or PROG. The screen displays ENTER
NUMBER.
7. Enter the telephone number. Press then press CHAN/REMOVE to backspace and make
corrections. Press REDIAL/PAUSE to store pauses in the dialing sequence.
-OR-
Press REDIAL/PAUSE to display the last number dialed from this phone.
8. Press SELECT or PROG to store your entry. The screen displays DISTINCT RING? and the
current setting.
9. Press or to change the setting. Choose Y (for yes) if you wish the phone to alert you to calls
from this number by changing to a distinctive ringing pattern after the first ring. Choose N for a
normal ringing pattern.
10.Press SELECT or PROG to confirm your selection. If you chose Y, a will be displayed with the
speed dial entry.
Edꢀt a speed dꢀal entry
1. Press and hold the memory location key (1 through 9) of the entry you wish to edit.
2. When the screen displays the entry you want to edit, press SELECT. Then press or until
EDIT flashes.
SPEED EDIT ERASE
8005959511
01
3. Press SELECT. The screen displays the name and number. The cursor appears at the beginning
of the name. Use
and the dial pad keys to edit the name. Press SELECT to move on to edit the
,
number. Use then press CHAN/REMOVE to backspace and make corrections. Press SELECT
to move to edit the distinctive ring setting.
4. Press SELECT to save the edited information.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢃ
Speed dꢀal
Delete a speed dꢀal entry
1. Press and hold the speed dial location key (1 through 9) of the entry you wish to delete.
2. When the screen displays the entry you want to delete, press SELECT. Then press or until
ERASE flashes.
SPEED EDIT ERASE
8005959511
01
3. Press SELECT. The screen displays ERASE NO YES and the number.
4. Press until YES flashes.
5. Press SELECT. You’ll hear a confirmation beep.
Dꢀal a speed dꢀal number
1. Press and hold the speed dial location key (1 through 9) of the entry you wish to dial.
2. Press TALK/FLASH to dial the displayed memory number.
Reassꢀgn locatꢀons ꢀn speed dꢀal
1. Press and hold the speed dial location key (1 through 9) of the entry you want to reassign.
2. When the screen displays the entry you want to reassign, press SELECT. Then press or
until SPEED flashes.
SPEED EDIT ERASE
8005959511
01
3. Press SELECT. The screen displays ENTER ꢁ-ꢉ.
4. Press the keys (1 through 9) to reassign this entry into another memory location. You’ll hear a
confirmation beep.
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Your phone has a caller ID (CID) with call waiting feature that works with service from your local
phone service provider. Caller ID with call waiting lets you see who’s calling before you answer the
phone, even when you’re on another call.
You may need to change your phone service to use this feature. Contact your phone service provider
if
:
• You have both caller ID and call waiting, but as separate services (you may need combined
service)
• You have only caller ID service, or only call waiting service.
• You don’t subscribe to any caller ID or call waiting services.
You can use this product with regular caller ID service, and you can use this product’s other features
without subscribing to either caller ID or combined caller ID with call waiting service.
There are fees for caller ID services, and they may not be available in all areas.
This product can provide information only if both you and the caller are in areas offering caller ID
service, and if both telephone companies use compatible equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢅ
Caller ID
Caller’s telephone number
•
•
If you answer
a call before
the information
appears on the
screen, it will
not be in the call
history.
Press OFF at
any time to exit
call history.
Caller’s name
Thꢀs party has called
more than once
Posꢀtꢀon of call ꢀn call
hꢀstory
Date of call
Tꢀme of call
Indꢀcate whether the
record ꢀs new or not
About call hꢀstory (caller ID)
Your phone can store up to 45 calls in its caller ID (CID) memory. When the memory is full, the oldest
call will automatically be deleted to make room for new incoming call information.
For each call that comes in, the screen displays the following information between the first and second rings:
•
•
•
•
Your caller’s name (15 letters are sent by your telephone company).
The caller’s area code and telephone number.
The time and date of the call.
The repeat tag (*) in the upper right corner, indicating the party has called more than once.
Revꢀew call hꢀstory
1. Press (CID) to enter call history viewing mode.
2. Press or to scroll through records in call history.
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
Delete records from call hꢀstory
Delete a specific call
1. Locate the record you want to delete from call history.
2. Press the REMOVE key. You’ll hear a confirmation beep.
•
Caller ID numbers
may appear with an
area code that may
not be required
Delete all calls
for local calls, or
without a 1 that
may be needed
1. With the handset in idle (off) mode, press and hold the REMOVE key. The screen displays ERASE
ALL NO YES. The current choice flashes.
2. Press until YES flashes.
for long distance
calls. If the number
displayed is not in
the correct format,
press # repeatedly
to see the different
dialing options. You
can choose to dial
with or without the
area code and with
or without the 1.
3. Press SELECT. You’ll hear a confirmation beep.
Dꢀal a dꢀsplayed number
1. Locate the record in call history that you want to dial.
2. Although the call log entries you receive are 10 digits, (the area plus the 7-digit number,) in some
areas, you may need to dial only the seven digits, or a 1 plus the seven digits, or a 1 plus the area
code plus the seven digits. You can change the number of digits that you dial or store from the call
log. While reviewing the call log, press # repeatedly to display these dialing options for local and
long distance numbers before dialing or saving the telephone number. See an example below.
595-9511
1-595-9511
800-595-9511
1-800-595-9511
3. Press SELECT. Press or until DIAL flashes.
4. Press SELECT. The number is automatically dialed.
— OR —
When the number is correctly displayed for dialing, press TALK/FLASH.
Store a call hꢀstory record ꢀn the dꢀrectory
1. Locate the record in the call history you want to store in the directory.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢇ
Caller ID
2. You can change the number of digits that you dial or store from the
call log. While reviewing the call log, press # repeatedly to display
these dialing options for local and long distance numbers before
dialing or saving the telephone number. See the side column
(and illustration on the previous page) for more information on
changing the dialing format.
800-595-9511
•
Caller ID numbers
may appear with an
area code that may
not be required
for local calls, or
without a 1 that
NEW28
12/30
5:40PM
DIAL PROGRAM
3. Press SELECT, then press or until PROGRAM flashes, then
may be needed
800-595-9511
press SELECT again.
for long distance
calls. If the number
displayed is not in
the correct format,
press # repeatedly
to see the different
dialing options. You
can choose to dial
with or without the
area code and with
or without the 1.
NEW28
12/30
5:40PM
4. You will be given the option to edit the name and press SELECT.
Then you can edit the number and press SELECT.
DISTINCT RING? N
800-595-9511
5. Press or to select Y or N for distinctive ringer.
6. Press SELECT. You’ll hear a confirmation beep. If you choose
Y in step 5 a
will be displayed with the directory entry.
Dꢀsplay screen messages
Screen displays:
PRIVATE CALLER
UNKNOWN CALLER
When:
The other party is blocking name and/or number information.
Your phone company is unable to receive information about this
caller’s name and/or number.
This caller has called you more than once.
(after name)
*
ꢂꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operatꢀon
Dꢀsplay screen messages
Screen displays: When:
There is a call coming in.
** RINGING **
CONNECTING...
PHONE ON
The handset is waiting for dial tone.
The handset is in use.
You have been alerted by the telephone company that you have
received new voice mail.
NEW VOICEMAIL
The telephone base is paging the handset.
** PAGING **
BATTERY LOW
SCANNING...
The battery needs to be recharged.
The handset is changing to another of the 30 channels available.
1. Displays when one handset is on a call and the other handset
presses TALK/FLASH.
2. Displays when telephone base power is off and TALK/FLASH is
pressed. You’ll also hear an error tone.
OTHER HANDSET
ON OR OUT OF
RANGE
3. Displays when an out-of-range dial fails to connect.
The handset ringer is turned off.
RINGER: OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢉ
Battery ꢀnformatꢀon
Battery care and maꢀntenance
After your battery is fully charged, you can expect the following performance:
•
•
If you repeatedly
get a low battery
indicator, even after
charging overnight,
the battery should
be replaced.
To reduce the risk
of fire or injury to
persons or damage
to the telephone,
read and follow
these instructions
carefully: Charge
the battery
provided with
or identified for
use with this
product only in
accordance with
the instructions
and limitations
specified in the
user’s manual.
Operatꢀon
While in use (talking)
Operatꢀng tꢀme
up to 5 hours
While not in use (standby*)
up to 7 days
* Handset is off the telephone base or charger but not in use.
• The battery needs charging when:
— A new battery is installed in the handset.
— The phone beeps twice every five seconds.
— The screen displays BATTERY LOW and the low battery icon.
Place the handset in the telephone base or charger so the charge light turns on. The battery is typically fully
•
•
charged in 16 hours.
You can keep the battery fully charged by returning the handset to the telephone base or charger after
each use.
Replacꢀng the handset battery
1. Remove the battery compartment cover on the handset by pressing on the indentation and sliding
the cover downward.
2. Lift out the old battery and disconnect.
3. Align the two holes in the new battery’s plug with the socket
pins, and snap the plug into place. Snap the battery in the
compartment, as described in Installation, on page 3.
4. Replace the cover by sliding it up into place.
5. The new battery must be charged before using the phone. Place
the handset in the telephone base or charger and allow it to charge
for at least 16 hours the first charge. The telephone might operate
before that, but for best performance, let the battery charge fully.
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshootꢀng
If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after
trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications
Canada Ltd. at 1-800-267-7377.
Problem
Suggestꢀon
My telephone does not
work at all.
• Make sure the battery is installed and charged correctly (see page 3 and 30). For optimum daily
performance, return the cordless handset to the telephone base after use.
• Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.
• Make sure the telephone line cord is plugged firmly into the telephone base and the modular
wall jack.
• Unplug the unit’s electrical power and remove the battery from the handset. Wait for 15 seconds
then plug in the battery and plug in the power. Allow up to one minute for the cordless handset
and base to synchronize.
• Charge the battery in the cordless handset for at least 16 hours.
• Remove and re-insert the battery. If that still does not work, it may be necessary to purchase
a new battery pack.
• Disconnect the telephone base from the modular jack and plug in a working telephone. If this
telephone does not work, the problem is probably in the wiring or the local service. Call the
local telephone company.
BATTERY LOW is
• Place the handset in the telephone base or charger for recharging.
displayed on screen
• Remove and re-install the battery and use it normally until fully discharged, then recharge the
handset on the telephone base or charger for 16 hours.
• If the above measures do not correct the problem, the battery may need to be replaced.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢁ
Troubleshootꢀng
Problem
Suggestꢀon
The battery does not
charge in the handset
• Make sure the handset is placed in the charger correctly. The CHARGE light on the telephone
base or charger should be on.
or the handset battery • Remove the battery from the handset and install it in the spare battery compartment on the
does not accept
charge
side of the telephone base and let it charge for 16 hours. Then re-install the charged battery
into the handset.
• If the cordless handset is in the charger or in the telephone base but the CHARGE light is not
on, refer to The charge lꢀght ꢀs off in this section.
• It may be necessary to purchase a new battery. Please refer to the Battery ꢀnformatꢀon section
on page 30 of this user’s manual.
• The telephone might be malfunctioning. Please refer to the Warranty section on page 40 of
this user’s manual for further instruction.
The CHARGE light
is off
• Clean the charging contacts on the cordless handset(s) and telephone base each month using
a pencil eraser or a dry non-abrasive fabric.
• Make sure the power adapter and telephone line cords are plugged in correctly and
securely.
• Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one
minute for the cordless handset and telephone base to reset.
• The telephone might be malfunctioning. Please refer to the Warranty section on page 40 of
this user’s manual for further instruction.
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshootꢀng
Problem
Suggestꢀon
The CHARGE/IN
USE Indicator on the
telephone base is
flashing
• This is a signal that the battery is very low, completely depleted, or when there is no electrical
contact between the battery and the telephone base.
• Ensure the connector of the battery is securely plugged into the handset and place the handset
in the telephone base for charging.
There is no dial tone.
• First, try all the above suggestions.
• Move the cordless handset closer to the telephone base. It might be out of range.
• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
• Disconnect the telephone base from the telephone jack and connect a different telephone.
If there is no dial tone on the telephone either, the problem is in your wiring or local service.
Contact your local telephone company.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢃ
Troubleshootꢀng
Problem
Suggestꢀon
The telephone does
not ring when there is
an incoming call.
• Make sure the ringer is on. (See page 14).
• Make sure the telephone line cord and power adapter are plugged in properly (see page 2).
• The cordless handset may be too far from the telephone base. Move it closer to the telephone
base.
• There may be too many extension phones on the telephone line to allow all of them to ring
simultaneously. Try unplugging some of them.
• If the other telephones in your home are having the same problem, the problem is in the wiring
or local service. Contact the local telephone company (charges may apply).
• Other electronic products can cause interference to your cordless telephone. Try installing your
telephone as far away as possible from the following electronic devices: wireless routers, radios,
radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors,
televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.
• Test a working telephone at the telephone jack. If another telephone has the same problem,
the problem is in the telephone jack. Contact your local telephone company (charges may
apply).
• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
• Re-install the battery pack and place the cordless handset in the telephone base.
• Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute
for this to take place.
ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshootꢀng
Problem
Suggestꢀon
My handset does not • Make sure you have the ringer activated. Refer to the section(s) on ringer selection in this
ring when I receive
a call.
user’s manual.
• Make sure the telephone line cord is plugged firmly into the telephone base and the telephone
jack. Make sure the power cord is plugged in.
• You may be too far from the telephone base.
• Charge the battery in the handset for 16 hours. For optimum daily performance, return the
handset to its base when not in use.
• You may have too many extension phones on your telephone line to allow all of them to ring.
Try unplugging some of the other phones.
• The layout of your home or office might be limiting the operating range. Try moving the base
to another location, preferably on an upper floor.
• If the other phones in your home are having the issue, the problem is in your wiring or local
service. Contact your local telephone company (charges may apply.)
• Test a working phone at the phone jack. If another phone has the same problem, the problem
is the phone jack. Contact your local telephone company (charges may apply.)
• Other electronic products can cause interference with your cordless phone. Try installing
your phone as far away from these types of electronic devices as possible: wireless routers,
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless phones
• Your line cord might be malfunctioning. Try installing a new line cord.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢅ
Troubleshootꢀng
Problem
Suggestꢀon
I cannot dial out.
• First, try all the above suggestions.
• Make sure there is a dial tone before dialing. It is normal if the cordless handset takes a second
or two to synchronize with the telephone before producing a dial tone. Wait an extra second
before dialing.
• Make sure the telephone is set to the correct dial mode (pulse dial or tone dial) for the service
in your area. Refer to the Set dꢀal mode section of this user’s manual (page 13) to set the dial
mode.
• If the other telephones in your home are having the same problem, the problem is in the wiring
or local service. Contact your local telephone company (charges may apply).
• Eliminate any background noise. Noise from a television, radio, or other appliances may cause
the telephone to not dial out properly. If you cannot eliminate the background noise, first try
muting the cordless handset before dialing, or dialing from another room in your home with
less background noise.
I hear other calls when • Disconnect the telephone base from the telephone jack. Plug in a different telephone. If you still
using the telephone.
hear other calls, the problem is probably in the wiring or local service. Call your local telephone
company.
• Press the CHAN key to switch to a clear channel when on a call.
I hear noise in the
cordless handset, and
none of the keys or
buttons work.
• Make sure the telephone line cord is plugged in securely.
ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshootꢀng
Problem
Suggestꢀon
There is noise
or interference
during a
telephone
conversation.
• The handset may be out of range. Move it closer to the telephone base.
• Appliances or other cordless telephones plugged into the same circuit as the telephone base can
cause interference. Try moving the appliance or telephone base to another outlet.
• Other electronic products can cause interference to your cordless telephone. Try installing your
telephone as far away as possible from the following electronic devices: wireless routers, radios, radio
towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors, televisions,
VCRs, personal computers, kitchen appliances, and other cordless telephones.
• Microwave ovens operate on the same frequency as your telephone. It is normal to experience static
on your telephone while the microwave oven is operating. Do not install this telephone in the same
outlet or near a microwave oven.
My calls fade out
or cut in and out
when I am using
the cordless
• If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge
protector) into a different location. If this solves the problem, re-locate your telephone or modem
farther apart from each other, or use a different surge protector.
handset.
• The layout of your home or office might be limiting the operating range. Try moving the base to
another location, preferably a higher location for better reception.
• Disconnect the telephone base from the modular jack and plug in a corded telephone. If calls are still
not clear, the problem is probably in the wiring or local service. Contact your local service company
(charges may apply).
• Select channels 4 through 10 for your router (refer to the user’s manual of your router for more
information).
• If you still have problems with the telephone or the router, make sure the handset is ON and press
CHAN until the performance improves.
• Press the CHAN button while on a call until the interference has been eliminated.
• If the other telephones in your home are having the same problem, the problem is in the wiring or
local service. Contact the local telephone company (charges may apply).
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢇ
Troubleshootꢀng
Problem
Suggestꢀon
• Do you have DSL service? If yes, you need to have a DSL filter installed at every telephone jack
that has a telephone connected to it. Contact your DSL service provider for filter information.
My caller ID features
are not working
properly.
• Caller ID is a subscription service. You must subscribe to this service from your local telephone
company for this feature to work on your telephone.
• The caller may not be calling from an area which supports caller ID.
• Both you and the caller’s telephone companies must use equipment which are compatible with
caller ID service.
• If you subscribe to DSL service, install a DSL filter to the telephone line between the telephone
base and the telephone line jack. Contact your DSL service provider for filter information.
The system does not
receive caller ID or
the system does not
• Make sure you subscribe to caller ID with call waiting features services provided by the local
telephone company.
• The caller may not be calling from an area which supports caller ID.
display caller ID during • Both you and the caller’s telephone companies must use equipment which are compatible with
call waiting.
caller ID service.
• If you subscribe to DSL service, install a DSL filter to the telephone line between the telephone
base and the telephone line jack. Contact your DSL service provider for filter information.
Caller ID entries
do not match the
numbers I need to dial.
• Although the call log entries you receive are 10 digits, (the area plus the 7-digit number,) in
some areas, you may need to dial only the seven digits, or a 1 plus the seven digits, or a 1
plus the area code plus the seven digits. You can change the number of digits that you dial
or store from the call log.
• While reviewing the call log, press # repeatedly to display these dialing options for local and
long distance numbers before dialing or saving the telephone number.
ꢃꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshootꢀng
Problem
Suggestꢀon
My cordless handset
beeps five times and
is not performing
normally
• Makesurethepowercordissecurelypluggedintothetelephonebase. Plugtheunitintoadifferent
working electrical outlet not controlled by a wall switch.
• Move the cordless handset closer to the telephone base. It may be out of range.
• Reset the telephone base by unplugging and removing the battery from the handset. Wait
for 15 seconds then plug in the battery and plug in the power. Allow up to one minute for the
cordless handset and the telephone base to synchronize.
• Other electronic products can cause interference to your cordless telephone. Try installing
your telephone as far away from these electronic devices as possible: wireless routers, radios,
radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and other cordless telephones
Common cure for
electronic equipment
• If the unit is not responding normally, try putting the cordless handset in the telephone base
or the charger. If it does not seem to respond, try the following (in the order listed):
• Disconnect the power to the telephone base.
• Disconnect the battery on the cordless handset and the spare battery in the telephone base.
• Wait a few minutes before connecting power to the telephone base.
• Re-install the battery and place the cordless handset into the telephone base or charger.
• Wait for the cordless handset to synchronize its connection with the telephone base. Allow up
to one minute for this to take place.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃꢉ
Maꢀntenance
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install your telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, use caution when using electric appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a soft cloth slightly dampened with water or a mild soap. Do not use excess water or clean-
ing solvents of any kind.
Lꢀmꢀted Warranty
What does thꢀs lꢀmꢀted warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”)
are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions.
This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.
What wꢀll VTech do ꢀf the Product ꢀs not free from defects ꢀn materꢀals and workmanshꢀp durꢀng the lꢀmꢀted warranty perꢀod (“Materꢀally Defectꢀve Product”)?
During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we
may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective
parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return repaired or replacement Products to you in working condition.
You should expect the repair or replacement to take approximately 30 days.
How long ꢀs the lꢀmꢀted warranty perꢀod?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty,
this limited warranty also applies to repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining
on the original one-year warranty; whichever is longer.
What ꢀs not covered by thꢀs lꢀmꢀted warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid
intrusion; or
2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or
3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or
4. Product to the extent that the problem is caused by use with non-VTech accessories; or
5. Product whose warranty/quality stickers, Product serial numbers plates or electronic serial numbers have been removed, altered or rendered illegible; or
6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to
Products used for rental purposes); or
7.
Product returned without valid proof of purchase (see item 2 below); or
ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Lꢀmꢀted Warranty
8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
How do you get warranty servꢀce?
To obtain warranty service in the United States of America, please call 1-800-595-9511; In Canada, please dial 1 (800) 267-7377. NOTE: Before calling for service, please review the user’s manual
- a check of the Product controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of
the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty to you, transportation, delivery or handling charges prepaid. VTech assumes
no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will
notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are
not covered by this limited warranty.
What must you return wꢀth the Product to get warranty servꢀce?
1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and
2. Include “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and
3. Provide your name, complete and correct mailing address, and telephone number.
Other Lꢀmꢀtatꢀons
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties
for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to
this limited warranty and you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from
date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any
indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute
equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Please retaꢀn your orꢀgꢀnal sales receꢀpt as proof of purchase.
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢁ
Important safety ꢀnstructꢀons
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bath tub, kitchen sink or swimming pool).
5. Do not place this product on an unstable surface, such as a table, shelf or stand. The product may fall, causing serious damage.
6. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing
the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where
proper ventilation is not provided.
7.
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local
power company.
8. Do not allow anything to rest on the power cord. Do not install this product where the cord may have anyone walking on it.
9. Never push objects of any kind into this product through slots in the base or handset as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the base or handset other than specified access
doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
11. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
12. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.
C. If the product has been exposed to rain or water.
D.If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls
may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.
E. If the product has been dropped and the base and/or handset has been damaged.
F. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity of the leak.
15. Only put the handset of your telephone next to your ear when it is in normal talk.
16. This power unit is intended to be correctly orientated in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under the
table/cabinet outlet.
SAVE THESE INSTRUCTIONS
ꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC, ACTA and IC regulatꢀons
FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements
are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product.
This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of
the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. If you choose to use a clipping device, please make sure to only use the supplied VTech
belt clip.
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this
equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connect-
ing to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is
encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more
information, please contact your local telephone company.
This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable
your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its
authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty.
If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service. The telephone company is required to notify you before inter-
rupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you
of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product.
The telephone company is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢃ
FCC, ACTA and IC regulatꢀons
* Remain on the line and briefly explain the reason for the call before hanging up.
* Perform such activities in off-peak hours, such as early morning or late evening.
Industry Canada
This equipment complies with regulations RSS210 and CS-03 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
The term ‘’IC: ‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termina-
tion on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
The RBRC® seal
The RBRC® Seal on the nickel-cadmium battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of
their useful lives, when taken out of service within the United States and Canada.
The RBRC® program provides a convenient alternative to placing used nickel-cadmium batteries into the trash or municipal waste, which may be illegal in your area.
VTech’s participation in RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized VTech product service
centers. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its
commitment to protecting our environment and conserving natural resources.
RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.
ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical specifications
Enhanced 5.8GHz technology–your phone operates on a dual band transmission that combines the best of 5.8GHz and
900MHz technologies, providing enhanced performance over standard cordless telephones.
Frequency control
Crystal controlled
PLL synthesizer
Transmit frequency
Receive frequency
Telephone base: 912.75 - 917.10 MHz
Handset: 5863.80 - 5872.5 MHz
Telephone base: 5863.80 - 5872.5 MHz
Handset: 912.75 - 917.10 MHz
Channels
30
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range may vary according
to environmental conditions at the time of use.
Size
Handset: 184mm X 52mm X 41mm
Telephone base: 143.61mm X 108mm X 103.26mm (with wall mount)
Charger: 85mm X 78mm X 50mm
Weight
Handset: 130 grams
Charger: 61grams
Telephone base: 219.8 grams (with wall mount)
Power requirements
Memory
Handset: 400mAH Ni-Cd battery Telephone base: 9V AC @ 250mA
Charger: 9V DC @ 150mA
Nine speed dial locations; up to 24 digits, 15 characters per location
Directory: 20 memory locations (including the nine speed dial entries);
up to 24 digits, 15 characters per location
Caller ID: 45 memory locations
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢅ
Index
Display screen messages 28, 29
Maintenance 40
Making calls 10
Move a directory entry to the speed
dial 20
A
E
About call history (caller ID) 25-28
Answering calls 10
Edit a directory entry 19
Edit a speed dial entry 23
Ending calls 10
B
N
Battery information 30
Belt clip 7
Erase a directory entry 20
New voice mail 16
F
O
C
FCC, ACTA and IC regulations 43, 44
Operating range 16
Caller ID 25-28
Call transfer 17
H
P
Charge the handset battery 5, 14
Check for dial tone 5, 14
Choose location 3
Clear voicemail alert 17
Connect power and telephone line
cords 2
Handset layout 8
Handset operation 10
Handset ringer style/battery
save 6, 14
Parts check list 1
R
Reassign locations in speed dial 24
Replacing the handset battery 30
Review call history 26
Headset jack 15
I
S
D
If you subscribe to DSL service 6
Important safety instructions 42
Installation 2, 3, 4, 5, 6, 7
Set dial mode 13
Set handset date and time 5, 13
Set language 13
Set ringer volume 14
Set the dial mode 5
Speed dial 22-24
Store a call history record in the
directory 27
Store a directory entry 18
Store a speed dial entry 22
Delete all calls 27
Delete a specific call 27
Delete a speed dial entry 24
Delete records from call history 27
Desk/table bracket installation 4
Dial a directory number 21
Dial a displayed number 27
Dial a speed dial number 24
Directory 18-21
Install handset battery 3
Internet
6
L
Language 13
Limited Warranty 40,41
M
ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
T
Table of contents i, ii
Technical specifications 45
Telephone base layout 9
Telephone base operation 12
Telephone operation 8-17, 29
Temporary tone dialing 15
The RBRC® seal 44
Troubleshooting 31-39
V
Voice mail indicator 12
W
Wall mounting 4
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢇ
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon
Distributed in Canada by VTech Telecommunications Canada, Ltd., Richmond, B.C.
Copyright ©2007 for VTECH TELECOMMUNICATIONS LTD.
Printed in China.
v0.5
91-000908-040-100
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s manual
Model: ia5847
Download from Www.Somanuals.com. All Manuals Search And Download.
|