User’s Manual
DIGGER THE WOOLLY MAMMOTH TM
© 2014 VTech
Printed in China
US
91-002929-000
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Well, hello there! I’m Digger the Woolly Mammoth™. I transform
from a mammoth with a long nose and tusks to an excavator with a
huge bucket for digging. Charge me up, and watch me go!
1
2
4
6
3
5
9
10
8
7
1
2
3
4
5
6
7
Trunk Button <Mammoth only>
Charge-Up Lever
Light Button
Launch Button
Volume Button
Style Button
8
9
Voice Button
LCD Screen
10
Sound Button
ON/OFF Switch
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN THIS PACKAGE
•
One VTech® Switch & Go Dinos® Turbo: Digger the Woolly
Mammoth™
•
One user’s manual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
1. Please keep the user’s manual as it contains important
information.
2. For optimal performance, please use the device on a smooth,
flat surface.
3. While the unit’s motor is engaged, press any button to stop it.
Please note that the Trunk Button only works in Mammoth Mode.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a screwdriver to loosen
the screw.
3. Install 4 new “AA” size (LR6/AM-3)
batteries following the diagram inside
the battery box. (The use of new, alkaline
batteries is recommended for maximum
performance.)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Replace the battery cover and tighten the screw to secure.
NOTE: When the battery runs low, the toy will no longer respond. If this
happens, please replace the battery.
BATTERY NOTICE
•
•
•
Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
•
•
•
•
•
•
•
•
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if
removable).
•
Rechargeable batteries are only to be charged under adult
supervision.
PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to the ON
position to turn the unit ON.
2. STYLE BUTTON
Press the Style Button to change the
mammoth eyes or choose a driver.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. VOICE BUTTON
Press the Voice Button to hear the
mammoth or driver talk.
4. SOUND BUTTON
Press the Sound Button to hear cool
sound effects.
5. VOLUME BUTTON
Press the Volume Button to adjust the
volume. There are four levels available:
low, medium, high and mute.
6. CHARGE-UP LEVER
Press the Charge-Up Lever to charge
the mammoth or excavator for future
launches. The faster and more times you
press the Charge-Up Lever, the further
the mammoth or excavator will go.
7. LAUNCH BUTTON
After charging, press the Launch Button
to make the mammoth walk or excavator
drive across a flat surface. The charging
power will be lost if the Launch Button
is not pressed within approximately six
seconds of pressing the Charge-Up
Lever. If the mammoth or excavator hits
something while walking or driving, it will
stop moving and fun crashing sounds will
be heard.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
8. DIGGING SENSOR <Excavator
only>
Move the excavator’s arm up and down
to hear a realistic excavator sound.
9. TUSK SENSOR <Mammoth only>
Push down the mammoth’s left tusk to
hear a realistic mammoth sound effect
while in mammoth mode.
10.LIGHT BUTTON
Press the Light Button to turn on the light.
11.TRUNK BUTTON
Press the Trunk Button to swing the
mammoth’s trunk back-and-forth and hear
a realistic mammoth sound effect while in
mammoth mode.
12.TURNING THE UNIT OFF/AUTOMATIC SHUT-OFF
Slide the ON/OFF Switch to the OFF position or hold the Voice
Button for a few seconds to turn the unit OFF.
To preserve the battery, the unit will automatically power-off after
about one minute without input.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO SWITCH THE
EXCAVATOR TO A MAMMOTH
1. Excavator shape.
2. Flip down the yellow and
black panel on the right side.
3. Rotate the the excavator arm
180 degrees.
4. Fold the excavator arm in half and lower the arm, so the bucket fits
snugly behind the excavator cabin.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
5. Close the yellow and black
panel on the right side of the
excavator.
6. Rotate the front and back
legs/tracks clockwise.
7. Release the trunk from under
the excavator cabin, and flip
the tusks down on both sides.
8. Flip the black panels down
and extend the ears on both
sides.
9. Mammoth shape.
Note: To change the mammoth back into an excavator, reverse the
order of the steps above.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the battery.
3. Let the unit stand for a few minutes, then replace the battery.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new battery.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
Download from Www.Somanuals.com. All Manuals Search And Download.
9
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|