VIPowER Network Card VPA 3528Net User Manual

Aluminum USB 2.0 , LAN  
3.5 HDD NetWork Storage  
VPA-3528Net  
User’s Manual  
ViPowER  
We are your DataBridgeTM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
CONTENS  
Specfications....................................................................................04  
Features............................................................................................05  
Package Checklist............................................................................06  
Hardware Installation..........................................................................07  
Configuring LANDISK.......................................................................17  
Configure LANDISK through Web Browser .....................................17  
GUI Setup ............................................................................................................18  
SMB(SAMBA) Server Segment .........................................................................28  
FTP Server Segment .........................................................................................30  
Disk Utility Segment ...........................................................................................32  
Map your LANDISK .............................................................................................34  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Specfications  
Easy configuration and firmware upgrade under web-based GUI.  
Support Hardware Reset function by pressing the Power ON/OFF key for  
five seconds.  
Support up to 5 FTP users at the same time.  
Support USB 2.0 transfor rates up to 480 Mbit/Sec.  
Fully compatible with 3.5-inch IDE hard disk.  
USB 2.0/IDE compliant:  
Integrated USB transceiver.  
High-speed (480 Mbps) and full speed (12 Mbps) support.  
USB suspend/resume, remote wake up support.  
Supports ATA PIO modes 0-4: ATA interface operation mode is automatically  
selected during device initialization or manually programmed with configu-  
ration data .  
Supports Ultra DMA modes 0-4.  
Supports 48-bit LBA (large HDD), when the VPA-3528Net NetWork Storage  
assembled with one 3.5-inch HDD.  
Supports 16-bit Multiword DMA mode and Ultra DMA mode interface.  
Supports Power Down mode and USB suspend indicator.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Features  
Drive enclosure made of aluminum alloy to aide in heat dissipation.  
Support USB 2.0 transfor rates up to 480 Mbit/Sec.  
Support 3.5-inch IDE hard disk.  
Compatible with Windows 98SE/ME/2000/XP  
Support DHCP server.  
Under network environment, it supports one 10/100Mbps Ethernet port.  
Built-in Ethernet Switch Port, easy to access and share data on the NetDisk  
Compatible with DSL routers/modems  
Support CIFS/SMB for Microsoft Network remote users to retrieve files  
through My Neighborhood.  
Support FTP server.  
Support Samba server, by which the server hosts 64 clients on line.  
Password management provides secure access to HDD and web  
management.  
Native Plug-n-Play supports for Ethernet and USB 2.0 interfaces.  
Systems Requirements  
Windows Me/2000/XP (no drivers required)  
(software drivers for Windows 98SE included)  
Mac OS 9.0 or later (software drivers included)  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Package Checklist  
The VPA-3528Net - 3.5” HDD Aluminum NetWork Storage package contains the  
following items:  
1. One VPA-3528Net Aluminum Case  
2. Two Rubber Stands  
3. One LAN Cable  
4. One USB 2.0 cable  
5. One+12V power adapter connected with one Power Adapter Power Cord  
6. One USB Drivers and Utility Installation CD  
7. One User`s Manual  
8. Package of screws  
If any of these items are missing or damaged, please contact your dealer or  
sales representative for assistance.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Hardware Installation  
Diagram for VPA-3528Net Aluminum USB 2.0+LAN 3.5-inch HDD  
NetWork Sotrage  
Red LAN LED Indicator  
Red SYS LED Indicator  
Green HDD LED Indicator  
Green Power LED Indicator  
Fan Heat Sink Holes  
Body Case  
(including Body Outer Cover  
and Inner Cradle with PCB)  
Rear Panel  
Front Panel  
Rubber Stands (x2)  
USB Port Connector  
+12V Power Inlet  
Reset  
LAN Port Connector  
Power ON/OFF Switch  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Installation  
Proceed with the following steps to install the VPA-3528Net hardware.  
Step 1.  
Remove two retaining screws on the rear panel securing the Rear Panel and  
Body Case (Body Case including Body Outer Cover and Inner Cradle with  
PCB and Front Cover).  
Step 2.  
Carefully slide the Inner Cradle with PCB and Front Cover off the Body Outer  
Cover with Rear Panel.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Step 3.  
Retaining  
Screws  
Rubber  
Stands(x2)  
Inner Cradle with  
Front Cover and PCB  
Body Outer Cover  
with Rear Panel  
The illustration is the Components of the VPA-3528Net NetWork Storage.  
Step 4.  
(1) Position the HDD into the Inner  
Cradle with Front Cover and PCB.  
(2) Plug the power and IDE cables  
into the appropriate ports on the rear  
of the HDD ensuring that they fit  
securely.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Step 5.  
Secure the HDD and the Inner Cradle with four retaining screws (two on each  
side).  
Step 6.  
(1) Position the back of the Inner Cradle Assembly into the head of the Body  
Outer Cover.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Note :  
(a) “Inner Cradle with Front Cover, PCB and HDD”=”Inner Cradle  
Assembly”.  
(b) In order to Stabilize and NOT Rock the Inner Cradle Assembly  
assembled in the Body Outer Cover with rear panel.  
There are four front and rear bulges in the side of the Inner Cradle  
(two in each side), and two jogs in the inside of the Body Outer  
Cover (one in each inside).  
(c) Put the bulges between the jogs and the bottom of the Body  
Outer Cover.  
(2) Carefully slide the Inner Crale Assembly back into the Body Outer Cover  
with rear panel.  
Step 7.  
Replace the two screws which were removed in Step 1 from the back of the  
VPA-3528Net NetWork Storage.  
Step 8.  
Place the Rubber Stands on the downside of the VPA-3528Net NetWork  
Storage, and position the Rubber Stand Location Positioner into the Rubber  
Stand Location Holes on the downside of the NetWork Storage.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Step 8.  
Place the Rubber Stands on the downside of the VPA-3528Net NetWork  
Storage, and position the Rubber Stand Location Positioner into the Rubber  
Stand Location Holes on the downside of the NetWork Storage.  
Step 9.  
The hard drive installation is complete, and the VPA-3528Net NetWork Stor-  
age is ready to use.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
VPA-3528Net NetWork Storage Appliction  
Personal Data Backup  
For a single user, you can use VPA-3528Net NetWork Storage as an exrernal  
Hard disk driver to access your data through the Ethernet.  
Network File share  
VPA-3528Net NetWork Storage could also be connected to a 10/100 Base-T  
switch, Hub, or router to be shared among group users.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
FTP Remote Backup  
VPA-3528Net NetWork Storage packs the power of FTP function and this will  
give you the remote backup feature. If you plan to use the FTP, use the FTP  
supported by Browser. Type ftp://domain name or IP/ (ex. landisk) in  
Browser`s Address and press Enter.  
You will get into the authentication window and then you can key in the user  
name and password.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Connecting the VPA-3528Net to a Computer  
Computer and Systems Requirements  
LAN and USB equipped desktop computer or notebook  
Windows 98SE/Me/2000/XP/NT 4.0, or Mac OS 9.0 or above  
NOTE:  
Do NOT connect Ethernet and USB cables at the same time.  
Ethernet Network Storage Mode  
Proceed with the following steps to use the VPA-3528Net Network Storage.  
Step 1.  
Power on two computer.  
Step 2.  
Plug one end of the power adapter power cord +12V power adapter into an AC  
power outlet, and the other end to the +12V power inlet on the rear panel of the  
VPA-3528-Net NetWork Storage.  
Step 3.  
Connect one end of the LAN cable into the LAN port connector on the rear  
panel of the VPA-3528Net NetWork Storage, then plug the other end into a  
LAN port connector on the back of one of the two computer.  
Step 4.  
Power ON the VPA-3528Net NetWork Storage. The Power LED indicator on  
the front panel of the VPA-3528Net will light after a slight delay.  
Step 5.  
Use the other one computer to setup the VPA-3528Net NetWork Storage.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
USB Storage Mode  
Proceed with the following steps to use the VPA-3528Net NetWork Storage.  
Step 1.  
Power on the computer.  
Step 2.  
Plug one end of the power adapter power cord +12V power adapter into an AC  
power outlet, and the other end to the +12V power inlet on the rear panel of the  
VPA-3528Net NetWork Storage.  
Step 3.  
Connect one end of the USB cable into the USB port connector on the rear  
panel of the VPA-3528Net NetWork Storage, then plug the other end into one  
USB port on the back of the computer.  
Step 4.  
Power ON the VPA-3528Net NetWork Storage. The Power LED indicator on  
the front panel of the VPA-3528Net will light after a slight delay. The VPA-  
3528Net NetWork Storage is ready to use.  
Note:  
The device will auto-detect the speed of your USB port and adjust be-  
tween USB 1.0 and USB 2.0 speed once the driver is installed.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Setup the VPA-3528Net Network Storage  
Configure your VPA-3528Net NetWork Storage through Web Browser  
1
Enter in URL, then Key in landisk in IE and press Enter. The window  
Connect to VPA-3528Net will appear.  
2
3
4
Key admin in the User Name Column.  
Key admin in the Password Column.  
Click OK button.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5The GUI setup window will show up as below.  
5-1-1. Status Segment  
Click on Status shown on the LEFT side of the GUI setup window to enter  
into the window below. The window will allow the user to view the status of  
the HDD installed in the VPA-3528Net NetWork storage.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-1-2. Identification Segment  
Press the Change button following the Host Name and Group Name Seg-  
ment on the System Information Segment to enter into the Identification  
window.  
NOTE:  
Host Name: Please key in “VPA-3528Net”.  
Group Name: Please key in “VIPOWER”.  
Enter a new name into Group Name column  
and click OK button to change to a new group.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-1-3. Administration segment  
Press the Change button following Administrator to enter into Administra-  
tion window.  
Administrator: Please key in “admin” (default)  
Password: Please key in “admin” (default)  
Note:  
This Administration window allows you to change  
your Password setting. If you have made any  
changes, you will need to enter new Password to  
enter into the GUI setup window next time.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-1-4. Date/Time Segment  
Press the Change button following Date/Time Segment to enter into Date/  
Time window.  
You can set up the Date/Time/SNTP/Time Server/Time Zone information in  
this window. After finish setting up, click OK button.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-1-5. Languages Segment  
Support English/Japanese/Tradition Chinese/Simple Chinese  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-1-6. Firmware version Segment  
NAS-BASIC16 : Show the built-in version from factory.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-1-7. Network Information Segment  
IP Address : Show the connecting Ethernet IP address of the VPA-3528Net  
NetWork Storage.  
DHCP Server : You can choice ENABLE/DISABLE item then press Apply  
button to setup/un-setup the VPA-3528Net NetWork Storage as DHCP server.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-1-8. Disk Information Segment  
Disk ID : Show the factory model name of the HDD installed in the VPA-  
3528Net NetWork Storage.  
Free Size : Show the still available capacity of the HDD installed in the  
VPA-3528Net NetWork Storage.  
Total Size : Show the total capacity of the HDD installed in the VPA-3528Net  
NetWork Storage.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-2. IP Config Segment  
Click on IP Config shown on the LEFT side of the GUI setup window to enter  
into IP Config window. On this window, you can change the IP setting by  
ticking on Static IP as below item, entering your IP information in each  
column, then pressing on Apply button to complete setting up your static IP.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-3. Maintenance Segment  
Click on Maintenance shown on the LEFT side of the GUI setup window to  
enter into the window below.  
Read the instructions on the window to upload the Firmware Upload, Sys-  
tem Reboot or go back to the Factory Defaults settings.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-4. SMB Server Segment  
Click on SMB Server shown on the LEFT side of the GUI setup window to  
enter into the window below.  
You can manage your share folders and their passwords in this window.  
1. If your VPA-3528Net NetWork Storage has previously been formatted  
using Disk Utility feature in status segment, the default folder [PUBLIC]  
will show in this window. If your VPA-3528Net NetWork storage has not  
been formatted, you can still create new folders now.  
2. By clicking on Create, Rename, Delete on Folder List and clicking on  
Password on Sharing List, you can manage the share folders.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
3. By ticking on the folder Name and the Password button on Sharing List,  
you can set the Password of the folder on the Password- Microsoft  
Internet Explorer window. Then the folder being set with password will  
show * mark on the window.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-5. FTP Server Segment  
Click on FTP Server shown on the LEFT side of the GUI setup window to  
enter into the FTP Configuration window below.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Press on Add button show on Account List to add FTP user’s account.  
You can setup each “FTP Status” and “Allow anonymous? (User Name,  
Password, Access and En/Disable)” in the window. After completing the  
settings, press ADD button to add a new account. Each FTP user’s account  
status will show on FTP Configuration window after setup.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
5-6. Disk Utility Segment  
Click on [Disk Utility] shown on the LEFT side of the GUI setup window to  
enter into the window below.  
If your HDD is an unformatted new drive, you need to format the drive via this  
utility. Please note that VPA-3528Net NetWork Storage only support FAT32  
Format.  
1. Press Format button to start formatting your HDD.  
Warning:  
All your data and partitions will be deleted if the format button is  
pressed.  
If the file size of the new HDD is zero and the drive could not be  
found, you have to utilize the Disk Utility to format the HDD as FAT32  
format.  
2. After the HDD is formatted, please reboot your VPA-3528Net NetWork  
Storage and click Refresh button to refresh the IE.  
3. Running the Scan Disk program will check the file system. And correct  
any errors found. This Program should be run regularly. Press the Start  
button, and the results will show on the column. If you want to delete the  
error messages, please click on the messages and press Delete Error  
Msg button.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
ReSet the VPA-3528Net Network Storage  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Map your VPA-3528Net NetWork Storage  
By mapping your VPA-3528Net NetWork Storage, you can access it easily in the  
Computer.  
Use the right mouse but-  
ton to click the Start icon  
located in the lower left  
corner of the Windows  
taskbar. Click on Search.  
Select and click on Com-  
puter or people, and then  
select and click on a com-  
puter on the network in  
the Search window. Type  
“VPA-3528Net” in the  
Computer Name column,  
then press Search button.  
You will see the window.  
Point to the “VPA-3528Net”, then double click the LEFT mouse button. And  
choose the folder you want to map, then use the RIGHT mouse button to click  
the Map Network Drive icon located in the dialogue box.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
The following window will appear.  
Choose a Drive letter you want to map. Press Finish button to complete mapping.  
As the following window illustrates, you can now access VPA-3528Net NetWork  
Storage easily in the Computer.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Trouble Shooting  
1. While your VPA-3528Net NetWork Storage has been properly connected to  
the PC, but the GUI setup window does not appear properly after you type  
VPA-3528Net on the Browser and enter the Password, you need to config-  
ure your IP.  
1). Enter into DOS command prompt. Press Ipconfig/renew to verify your IP  
address if you use windows 98 or above.  
2). Or release your original IP via “winipcfg” command when using windows  
98.  
Go back to the Browser, type VPA-3528Net to enter into the GUI Setup  
window.  
2. How to configure the TCP/IP network protocol?  
Use the right mouse button to click the Start icon located in the lower left  
corner of the Windows taskbar. Click on Settings, then Control Panel. Se-  
lect and double click on Network Connections in the Control Panel window,  
and the Network Connections window will appear.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Point and use the right mouse button to click on Local Area Connection,  
and the sub-window will appear.  
Select and click on Properties on the sub-window. The Local Area Con-  
nection Properties window appears.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Choose Internet Protocol (TCP/IP) in the This connection uses the follow-  
ing items column, then press Properties button. The Internet Protocol  
(TCP/IP) Properties window will appear. Select and tick Use the following  
IP address, then key in the IP address. The Subnet mask will then appear  
automatically in the window. When finishing, press OK button  
3. How to configure your IP while your system is under Static IP?  
. Obtain IP, SubNet Mask, gateway, DNS data from your operating system.  
. Reconfigure your PC as auto IP by obtaining an IP address automatically.  
. Connect your PC and VPA-3528Net NetWork Storage.  
. Setup your VPA-3528Net NetWork Storage as Static IP via setup GUI window.  
. Change your PC’s IP back to previous setting.  
. Connect your system back to LAN.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
4. I can’t use the web browser to setup my VPA-3528Net.  
Setp.1 Click ”Tools” and select <Internet Option>  
Setp.2 Click on the “Clear History” button.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Setp.3 Click on the “Yes” button.  
Setp.4 Select <Content> and click on the “AutoComplete” button.  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ViPowER / VPA-3528Net User`s Manual  
Setp.5 Click on the “Clear Passwords” button.  
Setp.6 Click on the “OK” button to clear passwords  
ViPowER / 3.5-inch Aluminum HDD NetWork Storage  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Targus Mouse AMB08US User Manual
Tascam MP3 Player DR 22WL User Manual
Tektronix Photo Scanner 071 1844 00 User Manual
Toshiba Computer Drive 480082 D0 User Manual
Toshiba Flat Panel Television 27HL95 User Manual
Triarch Indoor Furnishings 60132 User Manual
Tripp Lite Computer Accessories NS2001SR User Manual
Tripp Lite Surge Protector SK120USB User Manual
Unitech Network Card MSR120 Series User Manual
Weed Eater Lawn Mower WE1538B User Manual