PRO 520XL
Professional
Mobile CB Radio
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN YOUR PACKAGE
If any of these item are missing or damaged, immediately contact your place of
purchase or Uniden Customer Service at: (800) 554-3988, 8:30 a.m. to 5:00 p.m.,
Central Time, Monday through Friday.
CB Radio
Microphone
Mounting Hardware
Other Printed Material
Mounting Bracket
Antenna must be purchased separately.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AN
1. PA Switch - Select the Public Address
mode when an external PA speaker is
connected. When the PA mode is
selected, the CB radio will be disabled.
Adjust the PA output level by rotating
the volume control.
9. Squelch - The squelch control is
used to eliminate background noise
during the absence of a transmission.
Turn the control fully counterclockwise,
then slowly rotate it back clockwise until
the noise disappears. At this setting any
transmission must be slightly stronger
than the background noise to “Break
Squelch” or to be heard. Further
clockwise rotation will increase the
threshold at which a signal will be
heard. You can select any level to
“Break Squelch.”
2. ANL Switch - You can select the
Automatic Noise Limiter to help reduce
harsh background noise caused by a
variety of interference sources.
3. Instant CH 9 Switch - Use this switch
to override the main channel selector
and instantly tune to the emergency
channel 9. Switch back to return to
normal 40 channel operation.
10. Volume Control - Rotate clockwise to
turn the radio on and to increase
the volume.
4. TX LED - An LED lights to indicate
11. Microphone Jack- The operational
mode of the CB is controlled by the
push-to-talk switch on the microphone.
Press the switch to activate the
when the radio is transmitting.
5. S/RF Meter - This LED meter shows the
relative strength of the received signal
or the RF output.
transmitter and disable the receiver.
Release the switch to enable the
receiver and disable the transmitter.
When transmitting, hold the microphone
about 2 inches from your mouth and
speak clearly in a normal voice. The
microphone included with the
6. Channel Indicator - Displays the
channel currently in use.
7. Channel Selector - This switch selects
the desired channel for transmission and
reception. All channels, except channel
9, may be used for communications
between stations operating under
different license. Channel 9 has been
reserved by the FCC for emergency
communications involving the
PRO 520XL is detachable electret type.
Antenna Connector - This female
connector permits connection of the trans-
mission line cable male connector (PL-259)
to the transceiver.
immediate safety of individuals or the
immediate protection of property.
Channel 9 also may be used to
render assistance to a motorist. This
is a FCC rule and applies to all
operators of CB radios.
Public Address - An external 8 ohm 7-watt
speaker must be connected to the “PA SP”
jack located on the back of the unit. The
speaker must be directed away from the
mic to prevent feedback.
External Speaker - The external speaker
jack is used for remote receiver monitoring.
The external speaker should have an 8
ohm impedance and be rated at least 7
watts. When an external speaker is
8. RF Gain - This control is used to adjust
the signal reception in areas where
strong signals are present. Turn the
control clockwise for maximum
reception.
connected, the internal speaker is disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
ND FUNCTIONS
FRONT VIEW
BACK VIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Plan the location of the radio and microphone
Connecting the Power Cord
bracket before starting installation. Select a
location that is convenient for operation and does
not interfere with the driver or passenger in the
vehicle. The radio should be securely fastened to
a solid surface using the mounting bracket and
self-tapping screws which are provided.
With regard to the connection of the power cords,
it may be possible or desirable to connect the red
lead (for negative ground systems) or the black
lead (for positive ground systems) to the ignition
switch accessory terminal so that the radio is
automatically turned off when the ignition switch
(key) is turned off.
Mobile Antenna
Since the maximum allowable power output of
the transceiver is limited by the FCC, the antenna
is a very important factor affecting the
transmission distance. It is for this reason that we
strongly recommend that you install only a quality
antenna in your new CB radio system. You have
purchased a superior quality transceiver. Don’t
diminish its performance by installing an
inferior antenna.
Alternately, the power lead may be connected to
an available terminal on the fuse block or even to
a point in the wiring harness. Care must be
taken, however, to guard against a short circuit
condition. When in doubt, please contact your
vehicle dealer for specific information about
your vehicle.
Ground Information
Only a properly matched antenna system will
allow maximum power transfer from the 50-ohm
transmission line to the radiating element. We
recommend that you use an SWR meter when
installing your antenna. Set your PRO 520XL to
channel 20 and make your adjustments to the
antenna until the meter reads as close to 1 as
possible. Your Uniden dealer is qualified to assist
you in the selection of the proper antenna to
meet your application requirements.
Most newer U.S. and foreign made cars and
small trucks use a negative ground system, while
some older cars and some newer larger trucks
may use a positive ground system. A negative
ground system is generally identified by the “-”
battery terminal being connected to the vehicle
motor block, but if you cannot determine the
polarity of your vehicle, consult your vehicle
dealer for information.
NOTE: This radio may be installed and used in
any 12-volt DC negative or positive ground
system.
For automobile installation, the whip antenna
may be used with good effect. The most efficient
and practical installation is a full quarter wave
whip antenna mounted on the rear deck or
fender top, midway between the rear window
and bumper.
Negative Ground System
If you are operating on a negative ground
system, connect the red DC power cord from the
radio to the positive “+” battery terminal or other
convenient point and connect the black power
lead to the chassis or vehicle frame, or the “ -”
terminal of the battery.
A short “loaded” whip antenna maybe more
convenient to install on your automobile, although
the efficiency is less than a full quarter wave
whip antenna.
For marine installation, consult your dealer for
information regarding an adequate grounding
system and prevention of electrolysis between
fittings on the hull and water.
Positive Ground System
If you are operating on a positive ground system,
connect the black DC power cord from the radio
to the “-” battery terminal or other convenient
point and connect the red power lead to the
chassis or vehicle frame, or the positive “+”
terminal of the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Operating Procedure to Receive
2. Select the desired channel for
transmission.
1. Be sure that the power source,
antenna and microphone are
properly connected.
3. If the channel is clear, depress the
push-to-talk switch on the side of
the microphone and speak in a
normal voice.
2. Turn the unit on by rotating the
volume control clockwise.
CAUTION: The transceiver Voltage
Standing Wave Ratio (VSWR)
measurement must be performed prior
to the use of the transmitter. A VSWR
in excess of 2:1 may damage the
transmitter. Please check your SWR
reading frequently by using an
SWR meter.
3. Set the channel selector switch to
the desired channel.
4. Set the volume control to a
comfortable listening level.
5. Listen to the background noise from
the speaker. Turn the squelch
control clockwise until the noise
disappears (no signal should be
present). Leave the control at this
setting. The squelch is now properly
set. The receiver will remain quiet
until a signal is actually received. Do
not advance the control too far, or
some weaker signals will not
be heard.
Preventative Maintenance
At six to twelve month intervals,
the following system checks should
be made:
1. Check the Voltage Standing Wave
Ratio (VSWR).
2. Inspect all electrical connections.
3. Inspect antenna coaxial cable
for wear.
Operating Procedure to Transmit
4. Inspect all screws and other
mounting hardware.
1. Be sure the operator has read and
understands part 95, FCC rules and
regulations prior to operating
the transmitter.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If your PRO 520XL is not performing to
If you determine that service is
your expectations, please try these
simple steps. If you still cannot get
satisfactory results after reading this
manual and following the
troubleshooting steps, please call the
Uniden Customer Service Center at:
1-800-297-1023 7:00 a.m. to 7:00 p.m.
Central Time, Monday through Friday.
necessary, contact your local dealer or
pack the unit in its original carton and
send it along with a brief concise
description of the problem, your name,
address, phone number, and a copy of
the original purchase receipt to the
address listed in the warranty.
TROUBLE
CHECK
Unit will not turn on.
No power.
1. Check power cord and all connections.
2. Check power cord fuse.
3. Check vehicle electrical system.
Poor reception
1. Check and adjust squelch.
2. Check antenna system, cable and connectors.
3. Check operation mode of the radio.
Weak transmission
1. Check antenna system, cable and connectors.
2. Check antenna grounding.
3. Check for corrosion on connectors.
radiotelephone technician for service
and alignment of this radio. When
ordering parts, it is important to specify
the correct model number of this radio.
Servicing Your CB
Technical information, diagrams and
charts will be provided upon request. It
is the user’s responsibility to see that
this radio is operating at all times in
accordance with the FCC Citizens
Radio Service regulations. We highly
recommend that you consult a qualified
Please refer to the warning information
on the first page of this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Channels:
40 AM
Frequency Range:
Frequency Control:
Frequency Tolerance:
Operating Temperature:
Microphone:
26.965 to 27.405 MHz
Phase Locked Loop (PLL) synthesizer
±0.005%
-30ºC to +50ºC
Plug in type: dynamic
13.8 V DC nom. (+ or - ground)
TX: full mod., 1.7A
Input Voltage:
Current Drain:
RX: with max. audio output, 1.7A
4-1/2” W x 6-3/4” D x 1-3/8” H
1 lb. 10 oz.
Size:
Weight:
Antenna Connector:
LED Meter:
UHF, SO-239
Indicates relative RF output and received
signal strength
TRANSMITTER
Power Output:
Modulation:
Freq. Response:
Output Impedance:
4 Watts
Class B amplitude modulation
300-2500 Hz
50 ohms, unbalanced
RECEIVER
Sensitivity:
Selectivity:
Image Rejection:
I.F. Frequency:
0.5µV for 10 dB; (S + N) /N typical (limit: 1.0µV)
6 dB @ 7kHz, 70 dB @ 10kHz typical
80 dB typical
Double Conversion Superheterodyne
1st 10.692 MHz
2nd 450 kHz
RF Gain Control:
Automatic Gain Control:
Adjustable for optimum reception
(AGC): less than 10dB change in audio output for
inputs from 10 to 50,000 microvolts
Adjustable; threshold less than1µV
7 watts max. into 8 ohms
300 to 2000 Hz
less than 10% at 4 watts, 1000Hz
16 ohms, 3 watts round
Squelch:
Audio Output Power:
Freq. Response:
Distortion:
Internal Speaker:
External Speaker:
PA System:
(not supplied) 8 ohms
7 watts in external 8 ohm speaker
Specifications and features are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
TWO YEAR WARRANTY
WARRANTOR: UNIDEN AMERICA
CORPORATION (“Uniden”)
WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT OF
INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this
exclusion or limitation of incidental or
consequential damages so the above
limitation or exclusion may not apply
to you.
ELEMENTS OF WARRANTY: Uniden
warrants, for two years, to the original
retail owner, this Uniden Product to be
free from defects in materials and
craftsmanship with only the limitations or
exclusions set out below.
WARRANTY DURATION: This warranty
to the original user shall terminate and be
of no further effect 24 months after the
date of original retail sale. The warranty
is invalid if the Product is (A) damaged
or not maintained as reasonable or
necessary, (B) modified, altered, or used
as part of any conversion kits,
subassemblies, or any configurations not
sold by Uniden, (C) improperly installed,
(D) serviced or repaired by someone
other than an authorized Uniden service
center for a defect or malfunction covered
by this warranty, (E) used in any
LEGAL REMEDIES: This warranty gives
you specific legal rights, and you may
also have other rights which vary from
state to state. This warranty is void
outside the United States of America.
PROCEDURE FOR OBTAINING
conjunction with equipment or parts or as PERFORMANCE OF WARRANTY:
part of any system not manufactured by
Uniden, or (F) installed or programmed
by anyone other than as detailed by the
owner’s manual for this product.
If, after following the instructions in the
owner’s manual you are certain that the
Product is defective, pack the Product
carefully (preferably in its original
packaging). The Product should include
all parts and accessories originally
packaged with the Product. Include
evidence of original purchase and a note
describing the defect that has caused you
to return it. The product should be
shipped freight prepaid, by traceable
means, to warrantor at:
STATEMENT OF REMEDY: In the event
that the product does not conform to this
warranty at any time while this warranty
is in effect, warrantor will either, at its
option, repair or replace the defective unit
and return it to you without charge for
parts, service, or any other cost (except
shipping and handling) incurred by
warrantor or its representatives in
connection with the performance of this
warranty. Warrantor, at its option, may
replace the unit with a new or refurbished
unit. THE LIMITED WARRANTY SET
FORTH ABOVE IS THE SOLE AND
ENTIRE WARRANTY PERTAINING TO
THE PRODUCT AND IS IN LIEU OF
AND EXCLUDES ALL OTHER
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd
Fort Worth, TX 76155
(800) 554-3988,
8:30 a.m. to 5 p.m., Central Time,
Monday through Friday
Download from Www.Somanuals.com. All Manuals Search And Download.
CUT
X
XL
PRO 520 PRODUCT REGISTRATION CARD
Thank you for choosing a Uniden Personal Communications product. You have chosen one of the most
sophisticated, technologically advanced electronic products available. Please fill out the requested
information on this card so that we can better understand our customers and their needs. With this
information we plan new products, advertising, and guide our customer service programs. Thanks for
your help.
1. J Mr.
2. J Mrs.
3. J Ms.
4. J Miss
7. Last Name
5. First Name
6. Initial
8. Street
10. City
9. Apt. No.
11. State
12. Zip
13. Date of purchase: _______________________
14. Serial No. _______________________
20. Please check your age category
J Under 20
J 20-25
15. Is this the first CB Radio you have purchased
or received as a gift?
J 26-30
16. If NO, please specify brand and model
number purchased.
J 31-35
J 36-40
A. ___________________________
B. ___________________________
C. ___________________________
J 41-45
J 46-50
J 51-55
J 56-60
17. Where did you purchase the product?
J Department Store
J Discount Store
J Catalog Showroom
J Electronics Specialty Store
J Internet
J 61-65
J 66 & over
21. Occupation
J Homemaker
J Teacher/Educator
J Professional Driver
J Executive/Administrator
J Civil Servant
J Mail Order
J Gift
J Truck Stop
J Sales/Marketing
J Clerical
J Farmer/Agriculture
J Military
J Technical/Professional
J Business/Professional
J Craftsman
J Machine Operator/Laborer
J Retired
18. How did you become aware of this product?
J TV Advertisement
J Magazine Advertisement
J Newspaper Advertisement
J Store Display
J Friend’s Recommendation
J Salesperson’s Recommendation
J Previous Use
J Student
19. Please check two of the factors that most
influenced your purchase of this product.
J Style or Appearance
J Price
22. Please check your approximate family income.
J Under $10,000
J $10,000 - 19,999
J Uniden Reputation
J Warranty
J $20,000 - 29,999
J $30,000 - 39,999
J Previous Use
J $40,000 - 49,999
J Features
J $50,000 - 59,999
J Quality
J $60,000 & Over
Download from Www.Somanuals.com. All Manuals Search And Download.
CUT
PLACE
FIRST CLASS
STAMP
HERE
PO BOX 8283
Denver, CO 80201-8283
ATTN: PC MARKET RESEARCH DEPARTMENT
Please do not send any products or service related correspondence to this address.
Please fold here
23. What type of credit cards do you use?
21. What magazine(s) do you read?
J American Express, Diners Club, Carte Blanche
J Bank Card (Master Card, Visa, etc.)
J Gasoline Card. Name____________
J Department Store Cards
J Road & Track
J Car & Driver
J Motor Trend
J Auto Week
J Road Star
J None of the above
J Road King
J Trucker News
24. What type of car(s) do you drive?
J Compact
J Mid Size
J Sports Illustrated
J People
J Sports
J Time
J Full Size
J Newsweek
J Station Wagon
J Van
J Recreation Vehicle
J Specialty
J Motor Cycle
J Pick Up
J Popular Science
J Popular Mechanics
J Consumer Reports
Thank you for taking the time to complete this questionnaire. If you have any other comments or suggestions please write to:
Uniden America Corporation
Product Development Dept.
4700 Amon Carter Boulevard
Fort Worth, TX 76155
UTZZ01363ZZ
©1999 Uniden America Corporation
Printed in the Philippines
Please fold here
INSTRUCTIONS: Fill out both sides of card, Cut out on dashed line.
Fold on dotted line. Fold over flap and seal with glue or paste.
Download from Www.Somanuals.com. All Manuals Search And Download.
Affix postage and mail.
|