Congratulations on your purchase of the Uniden
GMR1058-2CK(4CK) (General Mobile Radio
Service) radios. These products are lightweight,
palm-sized radios. Use them at sporting events to
stay in contact with family and friends, hiking,
skiing, outdoors, or in a neighborhood watch for
vital communication. These compact, state-of-the-
art devices are equipped with many features.
compartment. Be certain to follow the instruction
written on the label on the battery pack.
Installing the battery pack incorrectly will prevent
the unit from operating.
1) Enter the Menu. The CTCSS code on the LCD
display will appear.
To select a call tone:
2) Press and hold the sel/ key again to turn the
unit OFF.
GMR1058-2CK(4CK)
1) Enter the Menu. Advance through the Menu until
the call icon is shown on the display. The
current call tone number (1-5) will be indicated.
2) Press the L or M key to increase or decrease
the number to the desired call tone. Each tone
will be heard through the speaker.
2) Press the L or M key to increase or decrease
the code number displayed. You can also select
oF (OFF) at this stage.
• Power Boost Button for
Maximum Range
• Battery Level Meter
• Channel Monitor
• Channel Scan
• Keypad Lock
Adjusting the Sound (Key Beeps)
4) Replace the battery compartment door.
Your radio emits a beep each time one of the buttons
or keys (except for the PTT and Power boost button,
and call key) are pressed. To turn this sound OFF,
press and hold call key while turning ON the radio.
Repeat this step to turn the sound ON.
• 15 GMRS / 7 FRS Channels
• Up to 10 Mile Range*
• 5 Selectable Call Tone Alerts
• Backlit LCD Display
• Roger Beep
3) Exit the Menu.
• Belt Clip
• NiMH Battery Pack and
Charger
Talking on Your Radio
3) Exit the Menu.
BATTERY LEVEL AND
LOW BATTERY ALERT
To talk to others using the radio:
Navigating through the Menu
To access the advanced features of the GMR1058-
2CK(4CK), your radio has a Menu function.
• Key Beep on/off
• 38 CTCSS Code
To transmit the selected call tone, press the call
key. The selected tone will automatically be
transmitted for a fixed length of time.
1) Press and hold the PTT button and speak in a
clear, normal voice about 2-3 inches away from
the microphone. While you are transmitting, the
icon will appear on the display. To avoid
PACKAGE CONTENTS
This unit has a battery level meter on the display to
indicate the status of the batteries. When the
batteries in the unit are very low, the battery level
• Optional Headset Accessory
• Headset Jack
Your package contains two(four) radios, this
reference guide including the product registration
card, two(four) Belt Clips, two(four) rechargeable
NiMH battery packs(#BP38), two(four) AC adapters
(#AD-0001), and two(four) recharging
cradles(#RC6488). To order headsets, replacement
batteries, or other accessories, visit our website at
8 a.m. to 5 p.m. CST. Use only Uniden accessories.
meter icon
will flash. Replace the alkaline
Keypad Lock
Normal
CTCSS
VOX Level
Call Tone
1-5
Key Lock
OFF-ON
Normal
cutting off the first part of your transmission,
pause slightly after pressing the PTT button
before you start talking.
batteries immediately or if you are using the NiMH
battery pack, you must recharge the battery in
order to continue using the radio.
To Lock the keypad:
1) Enter the Menu. Advance through the Menu until
OFF, 1-38 OFF, 1-3
2) When you are finished speaking, release the PTT
button.You can now receive incoming calls. While
the
icon appears on the display. The current
Warning! To avoid the risk of personal injury or
property damage from fire or electrical shock, only
use the Uniden accessories specifically designated
for this product.
key Lock status oF (OFF) blinks on the display.
2) To switch the key Lock mode from OFF to ON,
press the L key.
receiving, the
Note: When you press the Power boost button,
boost and icon appear on the display. The
icon will appear on the display.
1) To enter the Menu, press the sel/ key.
2) Additional presses of the sel/ key will
• NiMH Battery Pack - #BP38
• Charging Cradle - #RC6488
• AC Adapter - #AD-0001
• Headset - #HS2467
3) To confirm the setting, press the sel/ key. The
radio returns to the "Normal" mode.
advance you through the Menu until exiting to
"Normal" operating mode.
radio will transmit Maximum power when a GMRS
channel is selected. After one minute past when
the boost transmission is established, the
transmission stops automatically, and you will hear
a boost time out error tone.
* Range may vary depending on environmental and/or topographical conditions.
3) Other methods of exiting the Menu function are:
a. Press and hold the sel/ key again.
b. Press buttons or keys (except L and M keys).
c. Wait 10 seconds until the unit automatically
returns to “Normal” mode.
Note: If you exit the setting mode by pressing
other than the sel/ key, the key Lock setting will
be set to OFF.
USING THE CHARGING CRADLE
GMR1058 RADIO
If you use the rechargeable NiMH battery pack,
two(four) GMR1058 radios can be charged by using
the charging cradles.
GMRS LICENSE
To Unlock the keypad:
Voice Operated Transmission
Make sure to turn the radio OFF before placing
the radio in the charging cradle. Otherwise the
battery level meter icon won’t indicate properly.
The GMR1058-2CK(4CK) radio operates on the
General Mobile Radio Service (GMRS)
1) Press and hold the sel/ key to turn the unit
OFF.
Your GMR1058-2CK(4CK) radio is equipped with a
user selectable Voice Operated Transmitter (VOX)
that can be used for automatic voice transmissions.
The VOX feature is designed to be used with a
headset with a microphone. Transmission is
initiated by speaking into the remote microphone
instead of pushing the PTT button.
Choosing a Channel
14
15
21
22
23
frequencies which require a Federal
2) Press and hold the sel/ key again to turn the
unit ON. The keypad is unlocked.
1
2
16
Your radio has 22 channels and 38 CTCSS codes
you can use to talk to others. In order to speak to
someone, each of you must set to the same
channel and CTCSS code.
Communication Commission license to operate.
For licensing information and application forms,
call the FCC hotline at 1-800-418-3676. If you
have any questions you can contact the FCC
direct at 1-888-225-5322.
17
18
19
1) Connect the AC adapter (# AD-0001) to DC IN
9V jack and to a standard 120V AC wall outlet.
2) Set the charging cradle on the desk or tabletop,
and place the radio in the charging cradles with
the keypad facing forward.
8
Channel Scan Feature
24
25
9
Your GMR1058-2CK(4CK) radio has a channel
Scan feature that allows you to easily Scan all 22
channels. When an active channel is detected, the
unit will pause on that channel until the channel is
clear. Then after a 2 second delay, the unit will
continue scanning. Pressing the PTT or Power
boost button while the Scan is paused on a
channel will allow you to transmit on that channel.
To choose a channel:
20
10
11
3
4
5
With the radio in "Normal" mode press the ch key
and press the L or M key to increase or decrease
the channel number displayed.
To select the VOX level:
3) Make sure that the LED illuminates. Charge the
battery pack for 16 hours and remove the radio
from the charging cradle after charge.
No license is required for operation on channels
8-14 or operation on any channel in Canada.
26
12
13
1) Enter the Menu. Advance through the Menu until
the vox icon appears on the display. The current
level (OFF, 1-3) will be indicated. Level oF (OFF)
disables VOX, while levels (1-3) set the
sensitivity of the VOX circuit.
6
7
Note: FRS Channels 8-14 have an expectancy
range of up to 3 miles. GMRS channels 1-7, 15-22
have an expectancy range of up to 10 miles by
pressing the Power boost button.You can know
which GMRS or FRS channel is active by the icon.
The icon indicates GMRS channel, and the
icon indicates FRS channel.
27
Note: The charge indicator LED will remain on as
long as the radios are left in the charger.
INSTALL THE BATTERIES
Your GMR1058-2CK(4CK) radio uses the NiMH
battery pack or 4 AAA alkaline batteries (not
included). If alkaline batteries are used, we
recommend using high quality alkaline batteries.
To turn ON channel scanning:
2) Press either the L or M key to the desired VOX
sensitivity level. Use level 1 for increased
sensitivity to voice in normally quiet
1 Antenna
15 Receive Indicator
Press scn key until the scan... icon is displayed.
The channel number on the display will change as
the radio rapidly cycles through the channels.
2 PTT (Push-To-Talk) Button
3 Power boost Button
4 Monitor Key
16 Power Boost Indicator
17 Call Indicator
18 Scan Indicator
USING THE RADIO
environments, and use a higher level to reduce
undesired activation in very noisy environments.
3) Exit the Menu.
In order to get the most out of your new radio, read
this reference guide completely before attempting to
operate the unit.
5 Call Key
6 Scan Key
7 Speaker
19 Channel Indicator
20 CTCSS Indicator
21 Transmit Indicator
22 Volume Setting Indicator
23 VOX Indicator
24 Keypad Lock Indicator
25 GMRS/FRS Indicator
26 Charging Contacts
27 Charging LED
Choosing a CTCSS Code
To turn OFF channel scanning:
To install the Ni-MH battery pack:
1) Make sure your radio is OFF.
Each of the channels 1-22 may have any one of
the codes, OFF or 1-38 selected. Code oF (OFF)
indicates no CTCSS code selected and your radio
can receive a signal regardless of the code settings
of the transmitting radio.
Press the sel/ key, call key, scan key, PTT
button or Power boost button.
8 Channel Key
9 Headset Jack
10 Up Key
11 On/off/select Key
12 Down Key
2) Remove the battery compartment door by
pressing up the tab at the bottom of the
compartment door allowing the door to be
removed.
Turning the Radio On and Adjusting the Volume
Transmitting a Call Tone
1) Press and hold the sel/ key to turn the unit
ON, and increase the speaker volume by
pressing the L key. To decrease the volume,
press the M key.
Your GMR1058-2CK(4CK) radio is equipped with 5
selectable call tones that will be transmitted when
the call key is pressed.
13 Microphone
14 Battery Level Meter
3) Install the NiMH battery pack into the battery
Download from Www.Somanuals.com. All Manuals Search And Download.
|