Uniden Telephone XDECT R035 User Manual

XDECT R035  
Bluetooth®  
For more exciting new products please visit our website:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XDECT R035BT Series Owner’s Manual  
You will also find:  
What's in the box?  
Battery  
cover  
XDECT R035BT  
base with  
answering  
system and  
cordless  
Rechargeable  
battery  
(BT-694s)  
handset  
AC adapter  
Telephone cord  
(AAD-041S(M))  
XDECT R003BT accessory  
handset and charger  
(with stand)  
If you purchased  
You should  
have:  
None  
1 of each  
2 of each  
model number:  
XDECT R035BT  
XDECT R035BT+1  
XDECT R035BT+2  
Battery  
cover  
XDECT R035BT+3  
XDECT R035BT+4  
XDECT R035BT+5  
3 of each  
4 of each  
5 of each  
Charger AC  
adapter  
(AAD-041S(M))  
Rechargeable  
battery pack  
(BT-694s)  
If any items are missing or damaged, contact your place of purchase. Never use  
damaged products!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
What’s in the manual?  
Geꢀng Started............................ 1  
Installing Your Phone.................. 1  
Seꢀng Up the MobileLink  
Bluetooth™ Connecꢁon ........... 2  
Installing the Repeater/Charger(s)  
(if included)................................. 5  
Using the Repeater..................... 6  
Answering System Opꢁons (Ans.  
Setup)..................................... 25  
Accessing the Answering  
System.................................... 26  
Personalizing Your Greeꢁng ..... 27  
Geꢀng Your Messages ............. 28  
Screening Your Calls.................. 29  
Using the System While You’re  
Away from Home ................... 29  
Important Informaꢁon .............. 31  
Solving Problems ...................... 31  
Reseꢀng and Registering  
Handsets ................................ 36  
Registering Repeaters............... 37  
AC Adapter and Baꢂery  
Informaꢁon ............................ 39  
Index......................................... 40  
Understanding Your Phone.......... 9  
Using the Menus....................... 14  
Using Your Phone...................... 17  
Learning the Basics ................... 17  
Using Caller ID and Redial Lists. 19  
Using the Phonebook ............... 20  
Finding a Lost Handset.............. 22  
Using Mulꢁ-Handset Features.. 22  
Using Special Features.............. 24  
Using the Answering System ..... 25  
Warranty................................... 42  
IMpORTanT SafETy InSTRuCTIOnS!  
When using your telephone equipment, basic safety precautions should  
always be followed to reduce the risk of fire, electric shock and injury to  
persons, including the following:  
x
x
This unit is NOT waterproof. DO NOT expose this unit to rain or moisture.  
Do not use this product near water, for example, near a bath tub, wash bowl,  
kitchen sink or laundry tub, in a wet basement, or near a swimming pool.  
x
Avoid using a telephone (other than a cordless type) during an electrical  
storm. There may be a remote risk of electric shock from lightning.  
x
x
x
Do not use the telephone to report a gas leak in the vicinity of the leak.  
Use only the power cord and batteries indicated in this manual.  
Do not dispose of batteries in a fire. They may explode. Check with local codes  
for possible special disposal instructions.  
x
Do not place the handset in any charging cradle without the battery installed  
and the battery cover securely in place.  
#SaVE THESE InSTRuCTIOnS!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION! Risk of explosion if battery is replaced by an  
incorrect type! Dispose of used batteries according to the  
instructions. Do not open or mutilate the battery. Disconnect  
the battery before shipping this product.  
For more details, see the Important Information section.  
GETTInG STaRTED  
Installing Your Phone  
Charge the baꢀery  
1. Unpack all handsets, batteries, and  
battery covers. If you need to remove a  
battery cover, press in on the notch and  
slide the cover down.  
2. Line up the battery connector with the jack inside the handset and  
push the connector in until it clicks into place. Tug gently on the  
wires to make sure the battery pack is securely connected.  
3. Replace the cover and slide it up into place.  
4. Connect the base AC adapter to the DC IN 9V jack on the base. Run  
the cord through the indent and out the back.  
5. If you have accessory handsets, connect each charger’s AC adapter  
to the Power Jack and run the cord though the indent. (See page 5  
for the repeater/chargers.)  
6. Plug the other end of each adapter into a standard 240V AC power  
outlet.  
7. Place one handset in the base and the other(s) in the charger(s)  
with the display(s) facing forward. The display on the handset  
should light up; if it doesn’t, reseat the handset or try plugging the  
AC adapter into a different outlet.  
#Charge all handsets completely (about 15 hours) before using  
them.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the telephone cord  
Connect the TEL LINE jack to a standard telephone wall jack.  
Test the connecꢁon  
1. Pick up the handset from the cradle and press TaLk/fLash. You  
should hear a dial tone, and the display should say Talk  
.
x
If you don't hear a dial tone or the display says Check Tel Line  
try checking the connection between the base and the phone  
jack.  
,
2. Make a quick test call. (Press END to hang up.)  
If there's a lot of noise or static on the call, see page 33 for tips  
on avoiding interference.  
x
3. Test any accessory handsets the same way. If you can’t get a dial  
tone or the handset display says Unavailable, try resetting the  
handset (see page 36).  
Seꢀng Up the MobileLink Bluetooth™  
Connecꢁon  
The new XDECT R035BT with MobileLink technology can connect with  
Bluetooth phones supporting Bluetooth V2.0 handsfree profile. The  
following phones have been tested with this feature (see our website  
for the most up to date list of tested phones):  
x
x
x
Apple  
Motorola  
RIM  
x
x
x
HTC  
x
x
x
LG  
Nokia  
Samsung  
Palm  
Sony Ericsson  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Visit our website for more information on compatible models.  
x
If you are not certain of the profiles supported by your Bluetooth  
phone or if you have difficulty pairing your phone to the XDECT  
R035BT, see the manual that came with your phone.  
x
With the MobileLink feature, you can essentially treat your cellular  
phone as a second line. You can use the XDECT R035BT handset to  
make and receive calls on your cellular phone number, put cellular  
calls on hold, and transfer calls to other handsets. See page 17 for  
more information.  
x
Bluetooth wireless devices have a maximum range of 3m; the  
actual range will vary depending on local conditions (obstacles,  
battery power, interference, etc.).  
Pair your Bluetooth phone  
Pairing “introduces” two Bluetooth devices and gives them permission  
to connect to each other. In most cases, once you pair a phone to the  
XDECT R035BT, the two devices connect automatically whenever they  
detect each other. (If you have to manually reconnect each time, check  
the Bluetooth settings on your cellular phone.)  
1. With the XDECT R035BT in standby, press and hold BLuETooTh  
MoBILELINk on the base until the Bluetooth icon begins to flash  
(about 2 seconds).  
2. On your Bluetooth phone, start a search for other Bluetooth  
devices. (This process may take several seconds, and it will be  
different for each mobile phone; see your phone’s owner’s manual  
for detailed instructions.)  
3. Your phone should discover a device called a XDECT R035BT or a  
Handsfree device. When your phone asks if you want to pair with  
this device, answer yes.  
4. If your phone prompts you for a PIN code or password to pair  
with the XDECT R035BT, enter 0000 (four zeroes).  
x
When your phone accepts the Bluetooth connection, the XDECT  
R035BT sounds a confirmation tone and the Bluetooth LED on  
the base remains lit. You’ll also see the Bluetooth status icon  
display on the handset.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
Most cellular phones automatically transfer the audio to a  
Bluetooth device as soon as it pairs; if yours does not, look in  
your phone's Bluetooth setup for a "transfer audio" or "send  
audio to device" option.  
To test the connecꢁon  
1. Pick up the handset from the cradle.  
2. Dial the number you want to call, then press LINk twice on the  
handset. You may not hear a dial tone or ringing, but the handset  
display says Talk  
.
3. Make sure the call connects and you can hear clearly. (When  
you’re finished, press END to hang up.)  
x
The XDECT R035BT remembers the pairing information for  
your cellular; if it loses connection with your phone for any  
reason (e.g., the cellular phone travels out of range, runs out of  
charge, etc.), the XDECT R035BT can automatically reconnect  
the next time your phone becomes available.  
Using the XDECT R035BT with two Bluetooth phones  
x
The XDECT R035BT can save the pairing information for two  
different Bluetooth phones, but it can only use one cellular line at  
any given time. For example, if you pair the XDECT R035BT to two  
Bluetooth phones, when you press LINk on the handset, the XDECT  
R035BT asks which phone you want to connect to.  
x
If you are using the XDECT R035BT to talk on one Bluetooth  
phone, the XDECT R035BT will not ring if a call comes in on the  
second phone.  
x
x
You can set a different ring tone for each paired cellular phone  
(see page 15).  
To pair a second Bluetooth phone, just repeat the pairing  
procedure with the second phone. (If the first phone interferes  
when you’re pairing the second, just turn off Bluetooth on the first  
phone until you finish pairing the second one.)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Repeater/Charger(s) (if included)  
Connect the repeater/charger power cord  
1. If your phone came with any  
accessory handsets and chargers,  
connect a charger AC adapter to  
each charger's DC IN 9V jack and  
set the plug into the notch as  
shown. (These adapters might  
already be connected.)  
2. Plug the other end of the adapter  
into a standard 240V AC power  
outlet.  
Aꢀach the stand  
3. To attach the stand, you have to decide if you want the repeater to  
rest on a desk or hang on a wall.  
For desktop use, turn the stand so the locking tabs that say DEsk  
are facing the base with the arrows pointing up.  
OR  
For wall mount use, turn the stand so the locking tabs that say  
waLL are facing the base with the arrows pointing down.  
4. Align the stand with the notches on the repeater.  
5. Slide the stand onto the notches until it clicks into place. (To  
remove the stand, pull the locking tabs up and back. Then, slide  
the stand straight off the same direction you put it on.)  
Place the repeater/charger on the wall  
6. For wall mount use, place the mounting slots (hole spacing is  
30mm horizontal) over the pins on the wall, and slide the base  
down to lock it into place.  
To place a Repeater/Charger  
x
Make sure you have a strong signal from the base (at least 3 bars  
in the handset display).  
x
Put the charger at least 10m away from the base or any other  
Repeater/Charger. (If you put the charger on a different floor from  
the base, don't forget to allow 10m vertically, also.)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Repeater  
How it works  
An XDECT R003BT repeater can extend the range of your base in all  
directions, including up and down. The XDECT R003BT repeater unit is  
also a charger for the accessory handset.  
Each handset will automatically connect to the repeater or the base,  
depending on which signal is stronger, and the handset operates exactly  
the same way whether it's connected to the base or to the repeater.  
The repeaters must be registered to the base before you can use them.  
Any repeaters that come packaged with the base are already registered  
to that base. For instructions on registering repeaters to the base, see  
page 37.  
Note: Base range (grey  
area) and repeater range  
(dotted outline around  
Base coverage area  
(The base signal is  
stronger; handsets  
in this area connect  
to the base.)  
Handset  
repeater) is represented  
Base  
here as circular. Actual  
coverage area will  
vary depending on  
10m  
(Minimum  
separation  
distance)  
environment.  
(Handsets in this area can  
connect to either unit.)  
Repeater  
Your base supports a  
total of six XDECT R003BT  
repeaters, including  
any that were supplied  
with your phone.  
Repeater coverage area  
(The repeater signal is  
stronger; handsets in  
this area connect to  
the repeater. )  
Handset  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeaters can be up to 3 chain-links (maximum) from the base  
Example of coverage area with 6 repeaters (maximum total)  
You can  
roam anywhere  
within range of the  
base or the  
repeater(s) and make and  
receive calls as usual from your handsets.  
x
If you want to use the repeater with a new base, simply register  
the repeater to the new base (see page 37). The repeater  
overwrites its own link to the base.  
Placing repeaters  
Here are a few tips for placing your repeater so that you get the  
clearest signal and the maximum range:  
x
x
Make sure you have good reception from the base  
For best performance put the repeater at least 10m away from  
the base or any other repeater. (If you install the repeater on a  
different floor from the base, don't forget to allow 10m vertically,  
also).  
x
If possible, mount the repeater on the wall.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picking the best spot  
The best spot for the repeater is as far from the base as possible while  
still maintaining a good signal, or near the edge of the base’s coverage  
area. To find the edge of the coverage area:  
1. Stand near the base  
and make a call on  
the handset.  
2. While on the call,  
carry the handset  
away from the  
base towards the  
general area where  
you want to put the  
repeater.  
3. Watch the signal  
strength icon on  
the handset. Make a  
note where the icon  
drops from 4 bars to  
3 bars.  
4. Continue walking away from the base. Make a note where the  
signal strength icon drops from 3 bars to 2 or if you start to hear  
noise on the line (which indicates the signal is getting weaker).  
5. Place the repeater anywhere inside the range where the signal  
strength icon showed 3 bars and the handset had a clear signal  
with no noise.  
Tesꢁng the locaꢁon  
Connect the repeater's AC adapter and make sure the LINk light comes  
on and steady. If the light flashes, the repeater  
is not getting a good signal. The repeater may be too  
far away from the base, there may be interference  
from electronic devices, or the signal might be  
blocked by thick walls or metal objects. Try  
moving the repeater to another location.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
unDERSTanDInG yOuR pHOnE  
Parts of the base  
Antenna (not shown)  
MESSAGE  
COUNTER  
BLUETOOTH  
ELININ  
M
C
O
E
B
L
I
L
L
L
K
K
Bluetooth  
DOWN UP  
ON/OFF  
DND  
DO NOT  
DISTURB  
PLAY/  
STOP  
DELETE  
Charging  
contacts  
FWD  
FIND  
REV  
Base keys and how they work  
Key name (and icon)  
What it does  
fIND  
- In standby: page all handsets to find a lost  
one.  
Do NoT DIsTuRB  
oN/off  
- In standby: turn the Do Not Disturb  
feature on or off (see page 24).  
- In standby: turn the answering system on  
or off.  
REV  
- While a message is playing: for the first  
2 seconds, go to the previous message;  
after that: go to the start of this message.  
(
)
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key name (and icon)  
What it does  
PLaY/sToP  
- In standby: start playing messages.  
(
)
- While a message is playing: stop playing  
messages.  
- While the phone is ringing: mute the  
ringer for this call only.  
fwD  
- While a message is playing: skip to the  
next message.  
(
)
DELETE  
- While a message is playing: delete this  
message.  
(
)
- In standby, delete all messages.  
- While Bluetooth phone is ringing: reject  
the call.  
- In standby: decrease the ringer volume.  
- While a message is playing: decrease the  
speaker volume.  
DowN (–)  
- In standby: increase the ringer volume.  
- While a message is playing: increase the  
speaker volume.  
uP  
(+)  
BLuETooTh MoBILELINk  
- In standby: pair your Bluetooth phone to  
the base (see page 3).  
(
)
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts of the handset  
Visual  
ringer  
Earpiece  
Display  
MENU/  
SELECT  
UP  
LINK  
CLEAR/  
INTERCOM  
CID/RIGHT  
END  
PHONEBOOK/  
LEFT  
TALK/  
FLASH  
Twelve-  
key dial  
pad  
DOWN  
MESSAGES/  
MUTE  
REDIAL/  
PAUSE  
Charging  
contacts  
SPEAKER  
Microphone  
handset keys and how they work  
Key name (and icon)  
What it does  
- In standby: increase the ringer volume.  
- During a call: increase the call volume.  
- In the menu or any list: move the cursor  
up one line.  
uP  
(
)
- In standby or during a call: open the  
Caller ID list.  
- During text entry: move the cursor to  
the right.  
CID/RIghT  
(
)
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key name (and icon)  
What it does  
In standby: press and hold to lock or  
unlock the keypad.  
-
/ LoCk(  
)
*
- In standby: decrease the ringer volume.  
- During a call: decrease the call volume.  
DowN  
(
)
- In the menu or any list: move the cursor  
down one line.  
- In standby: open the menu.  
MENu/sELECT  
- In the menu or any list: select the  
highlighted item.  
- During a call: hang up.  
- In the menu or any list: exit and go to  
standby.  
- In standby: page another handset using  
the intercom.  
END  
(
)
- During a call: put the call on hold and  
start a call transfer.  
CLEaR/INTERCoM  
- While entering text: delete one  
character, or press and hold to delete all  
the characters.  
- In standby or during a call: open the  
phonebook.  
- In a menu: go back to the previous  
screen.  
PhoNEBook/LEfT  
(
)
- During text entry: move the cursor to  
the left.  
- In standby: start a telephone call on  
your land line (get a dial tone).  
- While the land line is ringing: answer the  
incoming call.  
TaLk/fLash  
(
)
- During a call: switch to a waiting call.  
- Switch a call to the speakerphone (and  
back).  
sPEakER  
(
)
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key name (and icon)  
What it does  
- In standby: open the redial list.  
REDIaL/PausE  
- While entering a phone number: insert a  
2-second pause.  
- In standby: start a telephone call using  
your paired Bluetooth phone.  
- While the Bluetooth phone is ringing:  
answer the incoming call.  
- During a MobileLink call: switch to a  
waiting call.  
LINk  
(
)
(See page 3 for information on pairing  
your Bluetooth phone.)  
- In standby: access your answering  
system.  
- During a call: mute the microphone.  
- While the phone is ringing: mute the  
ringer for this call only.  
MEssagEs/MuTE  
(
)
Display icons and what they mean  
Since the icons appear based on what you’re doing with the phone, you  
won’t ever see all of these icons at the same time.  
Icon  
What it means  
The ringer is turned off: this handset will not ring  
when a call comes in.  
You have a voice message waiting (see page 25).  
Privacy Mode is on: no other handset can join your  
call.  
The speakerphone is on.  
The microphone is muted, and the caller can’t hear  
you.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Icon  
What it means  
T-coil mode is on (see page 34).  
The battery is 1) empty, 2) getting low, 3) half  
charged, or 4) fully charged.  
The signal from the base is 1) weak, 2) low, 3)  
strong, or 4) very strong.  
[Aa]  
[aA]  
The handset enters capital letters first (see page 16).  
The handset enters lower-case letters first (see page  
16).  
There is a cellular phone paired to MobileLink slot  
#1, #2, or both. (When the paired Bluetooth phone  
is ringing, on a call, or on hold, the slot number for  
the paired phone blinks.)  
Using the Menus  
To open the  
menu, press  
MENU/SELECT.  
Press MENU/SELECT  
to choose the  
highlighted option  
.
The cursor  
shows the  
highlighted  
option.  
Handset Setup  
Ans. Setup  
<HANDSET SETUP>  
T-coil  
To move the  
cursor, use  
UP & DOWN.  
Day & Time  
Ringer Tones  
To go back a  
screen, press  
PHONEBOOK/LEFT  
press EN
OR  
exit the  
menu  
.
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
x
If you open the menu during a call, use PhoNEBook/LEfT to back  
out of the menu without hanging up.  
If you don't press any keys for 30 seconds, the handset exits the  
menu.  
The Handset Setup Menu  
You can change these settings separately for each handset.  
Turn on T-coil mode to reduce noise on some hearing  
aids (see page 34).  
T-coil  
You can set a different ring tone for the land line and  
each paired cellular phone. First, select the line you  
want to set the ring tone for. Then, select the ring  
tone that you want this handset to use for that line.  
Ringer Tones  
As you highlight each ring tone, the phone plays a  
sample. When you hear the tone you want, press  
MENu/sELECT.  
Turn on the personal ring feature. This feature lets  
you assign special ring tones to people in the cordless  
phone’s local phonebook. When someone in your  
phonebook calls, this handset uses the assigned ring  
tone. (It doesn’t matter what line the person calls on,  
as long as you have Caller ID service on that line.)  
Personal Ring  
Banner  
Change the name used on the handset’s display.  
Key Touch Tone Have the keypad sound a tone when you press a key.  
The Ans. Setup menu  
This menu controls the options and settings for your answering  
system (see page 25).  
The Day and Time menu  
If you subscribe to Caller ID, the phone automatically sets the day  
and time when it receives Caller ID information from your phone  
company. If you want to set the clock manually, just open the menu  
and select Day and Time. The phone prompts you to select the day,  
enter the time, and select AM/PM. (When prompted for the time, use  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
the number keypad to enter 2 digits for the hour and 2 digits for the  
minutes, e.g., 0530 for 5:30).  
The Global Setup menu  
The settings on this menu affect all handsets and the base. Before  
changing these settings, make sure the phone is in standby and all  
handsets are within range of the base. (Only one handset at a time can  
change these settings.)  
Do not change this setting unless instructed to by  
customer service.  
Set Line Mode  
This feature adds “0” or “00” at the beginning of  
the number received from Caller ID. The default  
Insert 0  
setting for New Zealand is ON. The default setting  
for Australia is OFF.  
Reset the message waiting indicator if it gets out of  
sync with your voice mail service (see page 25).  
VMWI Reset  
How to enter text on your phone  
Use the 12-key dial pad when you want to enter text into your phone  
(a name in the phonebook, the handset banner, etc.).  
x
The phone defaults to a capital letter for the first letter and any  
letter after a space; otherwise, it uses small letters.  
x
To switch to all capital letters, press . The phone defaults to all  
*
capital letters first (e. g. ABCabc2) until you enter a blank space or  
press again. (Any time you want to change case, just press .)  
*
*
x
If two letters in a row use the same number key, enter the first  
letter and wait a few seconds (or press RIghT); the cursor will  
move to the next space. Enter the next letter.  
x
x
Press to enter a blank space.  
To change a letter, move the cursor to that letter and press CLEaR  
to erase the letter; enter the new one.  
#
x
x
To erase the entire entry, press and hold CLEaR  
.
Press to cycle through all available symbols and punctuation.  
0
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
uSInG yOuR pHOnE  
You can control the features in this section through the handset.  
Learning the Basics  
From the cell  
phone  
To...  
From the land line  
make a call: Dial the  
number, then  
Press TaLk/fLash or  
sPEakER  
Press LINk twice.*  
Press TaLk/fLash or  
answer a call  
hang up  
Press LINk.  
sPEakER.  
Press END or put the handset in the cradle.  
mute the microphone  
during a call  
Press MEssagEs/MuTE. Press again to turn the  
microphone back on.  
Press CLEaR/INTERCoM. After 5 minutes on  
hold, the call will be disconnected.  
put a call on hold  
Press TaLk/fLash or  
sPEakER.  
return to a call on hold  
Press LINk.  
Press TaLk/fLash.  
Press LINk.* The  
The handset  
switch from one line to handset automatically  
the other (automatic  
hold)  
automatically puts  
the MobileLink line  
on hold and connects  
to the land line.  
puts the landline on  
hold and connects to  
the cell phone.  
switch between the  
speakerphone and  
earpiece  
Press sPEakER.  
While the phone is ringing, press MEssagEs/  
MuTE on the handset or PLaY/sToP on the  
base.  
mute the ringer for this  
call only  
* If you have two cellular phones paired, the phone prompts you  
to choose one. Select the phone you want, press MENu/sELECT, and  
press LINk again.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Change the volume  
Speaker and earpiece volume  
Ringer volume  
- You can change the volume of  
the speaker on the base and each  
cordless handset separately.  
- You can change volume of  
the ringer on the base and  
each handset separately.  
- You can change the volume of the  
earpiece on each handset; this does  
not affect the handset’s speaker  
volume.  
- Each cordless handset uses  
the same ringer volume for  
both the land line and the  
cellular line.  
- Anytime you are listening to a  
speaker or earpiece, press uP to  
increase the volume and DowN to  
decrease it.  
- When the phone is in  
standby, press uP to  
increase the volume and  
DowN to decrease it.  
- If you turn the ringer  
volume all the way down,  
the ringer turns off.  
Call Waiꢁng  
Call Waiting is a service available from your telephone provider that  
lets you receive calls while you are on another call. Caller ID on Call  
Waiting (CIDCW) service displays Caller ID information for a waiting  
call. You might have to subscribe to these services separately for your  
landline and your cellular phones. Contact your telephone provider(s)  
for more information.  
When you get a Call Waiting call, the phone sounds a tone and displays  
any CID information received for the waiting call.  
For Australian Model:  
Press TaLk/fLash on the handset and then press to accept the waiting  
2
call. The first caller is put on hold, and you will hear the new caller  
after a short pause. To return to the original caller, press TaLk/fLash  
and then  
2
again.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For New Zealand Model:  
Press TaLk/fLash on the handset to accept the waiting call. The first  
caller is put on hold, and you will hear the new caller after a short  
pause. To return to the original caller, press TaLk/fLash again.  
For Mobile Phone Calls:  
When you receive a call waiting call while on a mobile phone call  
press LINk to switch between mobile phone calls (for calls to the same  
mobile phone only).  
Using Caller ID and Redial Lists  
Caller ID (CID) is a service available from your telephone provider  
that shows the phone number (and sometimes the caller’s name) of  
incoming calls. You might have to subscribe to CID service separately  
for your landline and your cellular phones. Contact your telephone  
provider(s) for more information.  
#On MobileLink calls, you might see the name of your cellular  
phone in place of the caller’s name.  
Caller ID List  
Redial List  
- Each cordless handset  
remembers the last 5  
numbers you dialed  
on it.  
- The redial list is  
separate for each  
handset, however,  
only one handset can  
access the redial list at  
a time.  
- The phone saves the information for the last 30  
received calls to the CID list. Landline calls and  
MobileLink calls are saved to the same CID list.  
The CID list is shared by all cordless handsets.  
New records have an asterisk next to the  
received time.  
- When the phone’s in standby, each handset  
shows how many calls came in since the last time  
you checked the CID list.  
- The handset doesn’t  
record which line  
was used to call the  
number.  
- Only one handset can access the CID list at a  
time.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To…  
Open the CID list  
Follow these steps…  
Press CID/RIghT.  
Open the Redial list  
Press REDIaL/PausE.  
Press DowN to scroll through the list from  
newest to oldest. Press uP to scroll from  
oldest to newest.  
Scroll through the list  
Highlight the number you want and press  
Dial a number  
Close the list  
TaLk/fLash (or LINk twice*).  
Press PhoNEBook/LEfT.  
* If you have two cellular phones paired, the phone prompts you  
to choose one. Select the phone you want, press MENu/sELECT, and  
press LINk again.  
To select a number, highlight the number and press MENu/sELECT. The  
phone gives you the following options:  
Delete Entry Erase the number from the list.  
Add the number to the phonebook. The handset prompts  
Store Into  
Pb  
you to edit the name and number and select a personal  
ring.  
(Caller ID list only.) Erase all numbers from the list.  
(This does not affect the CID lists on the paired cellular  
phones.)  
Delete All  
Using the Phonebook  
x
The phone can store up to 70 entries in its central phonebook; the  
phonebook is shared by all cordless handsets.  
x
The phonebook is separate from any contact lists on the paired  
cellular phones: no changes you make in the phonebook will affect  
your cellular phone's contact list.  
x
Only one handset can access the phonebook at a time.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To do this...  
Do this...  
Open/close the  
phonebook  
Press PhoNEBook/LEfT.  
Scroll through the  
entries  
Press DowN to scroll through the phonebook  
from A to Z or Up to scroll from Z to A.  
Jump to entries that  
start with a certain  
letter  
Press the number key corresponding to the  
letter you want to jump to.  
Find the entry you want to dial, and press  
TaLk/fLash (or LINk twice*).  
Dial an entry  
* If you have two cellular phones paired, the phone prompts you  
to choose one. Select the phone you want, press MENu/sELECT, and  
press LINk again.  
To select a number, highlight the number and press MENu/sELECT. The  
phone gives you the following options:  
Edit this entry. The handset prompts you to edit the  
name and number and select a personal ring.  
Edit  
Delete  
Erase this entry.  
Phonebook menu opꢁons  
With the phone in standby, open the phonebook. From the main  
phonebook screen (instead of an individual entry), press MENu/sELECT.  
The phone gives you the following options:  
Add an entry to your phonebook. The handset  
prompts you to enter a name and number and  
select a personal ring.  
Create New  
Delete All  
Erase all the entries in the phonebook.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Finding a Lost Handset  
With the phone in standby, press fIND on the base. All the handsets will  
beep for 1 minute; to end the page, press fIND again or press any key  
on any handset.  
Using Mulꢁ-Handset Features  
To use the features in this section, you must have at least two cordless  
handsets.  
Expanding your phone  
x
Your base supports a total of six cordless handsets: the one that  
came with the base and up to five XDECT R003BT accessory  
handsets.  
x
x
Your base might be compatible with other Uniden accessory  
handsets: please visit our website for a list of compatible handsets.  
Accessory handsets must be registered to the base before you can  
use them. Handsets that aren't registered display a Handset not  
registered message. For instructions on registering handsets to  
the base, see page 36, or consult the accessory handset manual.  
x
x
Any accessory handsets that came packaged with the base are  
already registered for you.  
If a handset was previously registered to a base, you have to reset  
it so you can register it to a new base (see page 36 or the manual  
for the accessory handset).  
Conference calling  
x
When an outside call comes in on the land line, two handsets can  
join in a conference call with the outside caller.  
x
x
To join an ongoing call, press TaLk/fLash or sPEakER.  
To leave the conference call, hang up normally; the other handset  
remains connected to the call.  
Privacy mode  
You can prevent other handsets from joining a call. Start your call  
as usual, then press MENu/sELECT: the display shows Call Privacy  
.
Press MENu/sELECT again to turn privacy mode on (you’ll see in the  
display). When you hang up, privacy mode turns off automatically.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
As long you have privacy mode on, no other handsets can interrupt  
your call. To allow another handset to join the call, press MENu/sELECT  
twice to turn privacy mode off.  
Call transfer  
Using  
MobileLink  
To…  
On the land line  
Press CLEaR/INTERCoM, then select the  
handset you want to transfer the call to  
(select All to page all the handsets). When  
the other handset accepts the call, you’ll be  
disconnected.  
transfer a call  
cancel a transfer:  
Press END.  
and leave the call on  
hold  
and return to the call  
Press TaLk/fLash.  
Press LINk.  
1. Press CLEaR/INTERCoM. You can speak to  
the transferring handset.  
2. To speak to the outside caller,  
answer a call transfer  
page  
press TaLk/fLash.  
press LINk.  
Intercom  
x
x
x
Whenever the phone is in standby, you can make an intercom call  
between handsets without using the phone line.  
You can make an intercom call from any handset, but only two  
handsets can be in an intercom call at any time.  
If an outside call comes in during an intercom page, the phone  
sounds a tone and shows any received CID information. If another  
handset hasn't answered the page yet, the phone cancels the page  
to let you can answer the incoming call.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To...  
Follow these steps:  
Press CLEaR/INTERCoM, then select the  
handset you want to talk with (select  
All to page all handsets at the same  
time).  
make an intercom page  
cancel a page  
Press END.  
answer an intercom page  
leave an intercom call  
Press CLEaR/INTERCoM or TaLk/fLash.  
Press END.  
Press TaLk/fLash or LINk (depending  
on which line is ringing). The phone  
automatically disconnects the  
intercom call and connects you to the  
outside line.  
answer an outside call  
during an intercom call  
Using Special Features  
Do Not Disturb (DND)  
x
The Do Not Disturb feature (DND) turns off the ringers on the base  
and all handsets at the same time.  
x
You can turn on DND from the base whenever the phone is in  
standby: just press and hold Do NoT DIsTuRB for about a second.  
The phone automatically turns on the answering system and  
shows Do Not Disturb on all handsets.  
x
x
To turn DND off, press Do NoT DIsTuRB again.  
If you turn the answering system off while DND is on, the phone  
turns off DND along with the answering system.  
Chain dialing  
x
If you often have to enter a series of digits or a code number  
during a call, you can save that code number to a phonebook entry  
and use the phonebook to send the code number.  
x
Enter the code number (up to 20 digits) into the phonebook just  
like a regular phonebook entry. Be sure to enter the code number  
into the phonebook exactly as you would enter it during a call.  
x
When you hear the prompt that tells you to enter the number,  
open the phonebook and find the entry that contains your code  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
number. Press MENu/sELECT to transmit the code. Or, if you change  
your mind, use PhoNEBook/LEfT to close the phonebook.  
Voice message noꢁficaꢁon  
x
This feature supports Frequency-Shift Keying (FSK) message  
notification. Contact your voice mail provider for more details.  
x
If you subscribe to a voice mail service, your phone can notify you  
when you have a new message waiting.  
x
x
When you have new messages, the voice message icon (  
appears in the display, and the light at the top of the handset  
blinks.  
The voice message icon should disappear after you listen to all  
your new messages. If it doesn’t, you can reset it manually: With  
)
the phone in standby, open the menu and select Global Setup  
.
Select VMWI Reset, then select Yes  
.
uSInG THE anSWERInG SySTEM  
The answering system works with land line calls only and provides up  
to 15 minutes of total record time. The system will not answer or take  
messages on incoming call on the paired Bluetooth phones.  
Answering System Opꢁons (Ans. Setup)  
You can change the answering system options from any handset. Just  
open the menu and select Ans. Setup. Select one of the following:  
Enter a 2-digit PIN so you can access your  
answering system from any touch-tone phone  
(see page 29).  
Set the number of rings (6, 9, or 12) before the  
answering system answers the phone. Choose  
Toll Saver to have the system answer after 2  
rings if you have new messages or after 4 rings if  
you don’t.  
Security Code  
Ring Time  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the amount of time callers have to leave a  
message, either 1 minute or 4 minutes. Choose  
Announce Only if you don’t want the system to  
let callers to leave a message.  
Record Time  
Have the system beep every 15 seconds when  
you have a new message; the beeping stops  
when you listen to all your new messages.  
(To mute the alert without listening to your  
messages, press any key on the base.)  
Message Alert  
Turn on the call screen feature so you can hear  
callers as they leave messages on the base  
speaker (see page 29).  
Turn your answering system on or off. (To turn  
your system on or off from the base, just press  
oN/off.)  
Call Screen  
Ans. On/off  
Accessing the Answering System  
You can access your system from a handset whenever the phone is in  
standby.  
Press MESSAGES/  
MUTE to start remote  
operation mode.  
5:Stop  
[
/
/select]  
Press MENU/SELECT  
to choose the  
displayed  
option.  
Use PHONEBOOK/  
LEFT to go to the  
previous option:  
Use CALLER ID/  
RIGHT to go to  
the next option:  
4:Delete  
3:Skip  
6:SelectGreeting  
8:RecNewGreeting  
Press END to exit  
remote operation  
mode.  
2:Play  
1:Repeat  
x
During remote operation, the phone beeps to let you know it's  
waiting for your next command.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
x
x
You can press the number key next to the commands instead of  
scrolling through them.  
If you don't press any keys for 30 seconds, the phone returns to  
standby.  
Only one handset can access the system at a time, and you can't  
access the system while another handset is on a land line or  
MobileLink call.  
Personalizing Your Greeꢁng  
Your greeting can be between 2 seconds and 30 seconds long. If you  
don’t record an outgoing message, the system uses a pre-recorded  
greeting: Hello, no one is available to take your call. Please leave a  
message after the tone.  
Record your personal outgoing message or greeꢁng  
1. Access the system from any handset. Wait until the system  
finishes its announcements, or press  
2. Press  
3. Wait for the system to say “Record greeting,” then begin speaking.  
4. When you’re finished, press  
5
(Stop) to skip them.  
8
(RecNewGreeting).  
8
(RecNewGreeting) to recording.  
The system plays back your new greeting.  
5. To keep this greeting, press END. To re-record it, go back to step 2.  
Switch between the two greeꢁngs  
1. Access the system from any handset. Wait until the system  
finishes its announcements, or press  
5
(
Stop) to skip them.  
SelectGreeting) to play back the current greeting.  
SelectGreeting) again to switch greetings.  
2. Press  
3. Press  
6
(
(
6
Delete your greeꢁng  
Switch to your personal greeting following the steps above. While the  
system is playing back your greeting, press  
4
(Delete).  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Geꢀng Your Messages  
From a handset  
(remote  
operation)  
To…  
From the base  
Press MEssagEs/  
MuTE.  
Press PLaY/sToP.  
play new messages  
The system announces the number of new and old  
messages, then plays each new message (followed  
by the time and date) in the order it was received.  
Within the first 2 seconds of a message,  
replay an earlier  
message  
press REV.  
select 1:Repeat.  
Wait at least 5  
Wait at least 3 seconds after  
seconds after  
restart the current  
message  
the message starts, then press the message  
REV.  
starts, then select  
1:Repeat.  
skip a message  
Press fwD.  
Select 3:Skip.  
While the  
While the message is playing,  
press DELETE.  
message is  
playing, select  
4:Delete.  
delete a message  
With the phone in standby,  
press DELETE. When the system  
asks you to confirm, press  
DELETE again.  
delete all of your  
messages  
Not available.  
After the system plays the new messages,  
play old messages  
stop playback  
press PLaY/sToP again.  
Select 2:Play.  
Press PLaY/sToP.  
Select 5:Stop.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screening Your Calls  
Another feature your answering system gives you is call screening.  
While the system is taking a message, you can hear the caller on the  
base speaker (if you turn on Call Screen) or from a handset. Only one  
handset at a time can screen calls. If another handset is screening the  
call, the handset beeps and returns to standby.  
To...  
From the base  
From a handset  
Just listen to the  
caller over the  
speaker.  
hear the caller  
Press MEssagEs/MuTE.  
Press TaLk/fLash.  
leaving a message  
answer the call  
Not available.  
Press END or return the  
handset to the cradle.  
Press PLaY/sToP.  
mute the call screen  
without answering  
If you mute the call screen, the system continues  
taking the message: it just stops playing through  
the speaker.  
Using the System While You’re Away from Home  
You can also use your answering system from any touch-tone phone.  
Before you can use this feature, you must program a security code.  
Programming a security code  
1. With the phone in standby, open the menu from any handset.  
2. Select Ans. Setup, then select Security Code  
.
3. Use the number keypad to enter a two-digit security code (00 to  
99). Press MENu/sELECT when you’re finished.  
#Remember to make a note of your new security code!  
Dialing in to your system  
1. Call your telephone number and wait for the system to answer.  
x
If you have the Ring Time set to Toll Saver, the system  
answers after 2 rings if you have new messages and 4 rings if  
you don’t. You can hang up during the third or fourth ring.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x
If your answering system is off, it will answer after about 15  
rings and sound a series of beeps instead of your greeting.  
2. During the greeting (or beeps), press and immediately enter  
#
your security code. (If you enter it incorrectly 3 times, the system  
hangs up and returns to standby.)  
3. The system announces the current time, the number of messages  
stored in memory, and a help prompt. Then it starts beeping  
intermittently to let you know it's waiting for your command.  
4. When you hear the intermittent beeping, enter a command from  
the chart:  
#1  
#2  
#3  
#4  
Repeat message  
Play message  
Skip message  
#5  
#6  
#9  
#0  
Stop playback  
Turn on  
Turn off  
Delete message  
Hear prompts  
#If you don’t press any keys for 15 seconds, the phone will  
hang up and return to standby.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMpORTanT InfORMaTIOn  
Solving Problems  
If you have any trouble with your phone, try these simple steps first. If  
you need help, visit the Customer Support page on our website; www.  
If…  
Try…  
- Checking the telephone cord connection.  
No handsets can make  
or receive calls.  
- Disconnecting the base AC adapter. Wait a  
few minutes, then reconnect it.  
- Making sure the base is plugged in.  
A handset can’t make or  
receive calls.  
Moving the handset closer to the base.  
- Making sure the ringer is turned on.  
- Making sure Do Not Disturb is turned off.  
- Charging the battery for 15-20 hours.  
- Checking the battery connection.  
- Resetting the handset.  
A handset can make  
calls, but it won’t ring.  
A handset is not  
working.  
- Moving the handset closer to the base.  
- Seeing if another handset is in Privacy  
Mode.  
A handset says  
Unavailable.  
- Letting calls ring twice before answering.  
- Making sure your Caller ID service is active.  
No handsets display  
Caller ID information.  
Caller ID displays briefly  
and then clears.  
- You may have to change the line mode.  
Contact customer service.  
I can’t transfer calls.  
Resetting all handsets.  
Two handsets can’t talk  
to the caller.  
Making sure no handset is in Privacy Mode.  
- Making sure the answering system is on.  
- Making sure the base is plugged in.  
The answering system  
does not work.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If…  
Try…  
- Making sure the Record Time is not set to  
Announce Only.  
The system won’t record  
messages.  
- Deleting messages (memory may be full).  
- Making sure the call was on the land line  
(the system cannot answer MobileLink  
calls).  
- Seeing if another handset is using the  
A handset can’t access  
the answering system.  
system.  
- Making sure the phone is in standby.  
- Making sure your phone is in pairing mode.  
The XDECT R035BT  
won’t pair with my  
phone.  
- Check your phone’s manual for instructions  
on Bluetooth device pairing.  
- Making sure your phone supports the  
Bluetooth handsfree profile.  
- Making sure your phone has Bluetooth  
turned on.  
The XDECT R035BT  
doesn’t ring when my  
cellular phone does.  
- Making sure your phone is in range of the  
base.  
- Making sure the handset’s ringer is not  
turned off. (The base doesn’t ring on cellular  
calls.)  
- Adjusting the handset volume.  
- Setting your cellular phone to transfer  
the audio to a Bluetooth device. Check  
your phone’s manual for instructions on  
Bluetooth setup and options.  
- Erase the Bluetooth pairing and repair  
the cellphone to the base. Press and hold  
MoBILELINk for 10 seconds. The base beeps  
and the Bluetooth pairing information is  
erased from the base (if 2 cellular phones  
are paired, both pairings are deleted).  
The XDECT R035BT  
paired with my phone,  
but I can’t hear anything  
through the handset.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If…  
Try…  
- Re-registering the repeater.  
- Making sure the repeater and handset are  
registered to the same base.  
I can’t get my handset to  
switch to the repeater.  
The LINk light on the  
repeater randomly  
starts blinking.  
- Moving the repeater closer to the base.  
Weak or hard to hear audio  
If a caller’s voice sounds weak or soft, the signal might be blocked by  
large metal objects or walls; you might also be too far from the base, or  
the handset’s battery may be weak.  
x
Try moving around while you’re on a call or moving closer to the  
base to see if the sound gets louder.  
x
x
Make sure the handset’s battery is fully charged.  
Try adjusting the earpiece volume.  
Noise or staꢁc on the line  
Interference is the most common cause of noise or static on a cordless  
phone. Here are some common sources of interference:  
x
x
electrical appliances, especially microwave ovens  
computer equipment, especially wireless LAN equipment and DSL  
modems  
x
x
x
radio-based wireless devices, such as room monitors, wireless  
controllers, or wireless headphones or speakers  
fluorescent light fixtures (especially if they give off a buzzing  
noise)  
other services that use your phone line, like alarm systems,  
intercom systems, or broadband Internet service  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If static is on 1 handset or in If static is on all handsets or in all  
1 location:  
locations:  
- Check nearby for one of  
the common interference  
sources.  
- Try moving the handset away  
from a suspected source, or  
try moving the suspected  
source so it’s not between the  
handset and the base.  
- Check near the base for the source  
of interference.  
- Try moving the base away from a  
suspected source, or turn off the  
source if possible.  
- If the base has an adjustable  
antenna, try raising the antenna so it  
stands straight up.  
- There is always more noise at  
the edges of the base’s range.  
If an Out of Range message  
displays, try moving closer to  
the base.  
- If you have any service that uses the  
phone line, you might need a filter  
(see below).  
Installing a line filter or DSL filter  
Sometimes, broadband Internet services that use the telephone line  
can interfere with phones. One of these services−DSL−often causes  
static on telephones. A DSL filter or telephone line filter usually solves  
this problem. The technician who installed your DSL service might  
have left some filters for you; if not, call your DSL provider or look in  
any electronics store.  
Plug the DSL filter into the telephone wall jack and plug your phone’s  
base into the filter. Make a test call to make sure the noise is gone.  
Do you use a T-Coil hearing aid?  
- If you have a hearing aid equipped with a telecoil (T-coil) feature, the  
interaction between the hearing aid and digital cordless phones can  
cause noise in the handset. If you have a T-coil hearing aid and you have  
problems with noise on the line, try turning on T-coil mode. Open the  
menu. Select Handset Setup, then select T-coil  
.
- Using T-coil mode can shorten the handset’s talk time; make sure to  
watch the battery status and keep the battery charged.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Liquid damage  
Moisture and liquid can damage your cordless phone. If the exterior  
housing of the handset or base is exposed to moisture or liquid, wipe  
off the liquid, and use as normal. If moisture or liquid is inside the  
plastic housing (i.e. liquid can be heard in the phone or liquid has  
entered the handset battery compartment or vent openings on the  
base), follow these steps:  
Handset  
Base  
- Remove the battery cover and  
- Disconnect the AC adapter  
disconnect the battery.  
to cut off the power.  
- Let dry for at least 3 days with  
the battery disconnected and the  
cover off for ventilation.  
- After the handset dries, reconnect  
the battery and replace the cover.  
Recharge the battery fully before  
using.  
- Disconnect the telephone  
cord.  
- Let dry for at least 3 days  
before reconnecting.  
#CAUTION! DO NOT use a microwave oven to speed up the  
drying process. This will cause permanent damage to the  
handset, base and the microwave oven.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reseꢀng and Registering Handsets  
If you are having trouble with a cordless handset or if you want to  
replace one, you need to clear the registration information from the  
base and the handset:  
Do you have the base the handset is registered to?  
Yes  
No  
1. Press and hold END and  
#
until the  
1. Press and hold END  
System Reset menu appears (about 5  
and until the System  
#
seconds).  
Reset menu appears  
(about 5 seconds).  
2. Select Deregister HS. The display lists  
all registered handsets.  
2. Select Base  
Unavailable.  
3. Select the handset you want to reset.  
3. When the handset  
asks you to confirm,  
select Yes. The  
4. When the handset asks you to  
confirm, select Yes. The handset  
clears its information from the base  
and deletes its own link to the base.  
handset deletes its  
own link without  
contacting the base.  
Registering a handset  
When you reset a handset (or if you buy a new one), that handset  
displays a Handset Not Registered message. If you see this message  
on a handset, you need to register it to a base before you can use it.  
Does the handset fit in the base cradle?  
Yes  
No  
Place the handset in the base.  
The display should say Handset  
Registering.  
1. With the phone in standby,  
press and hold fIND on the  
base for about 5 seconds.  
2. On the handset you want  
to register, press and  
hold until the display  
#
says Handset Registering  
(about 2 seconds).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In about 30 seconds, the handset display should say Registration  
Complete. Press TaLk/fLash and make sure you get a dial tone.  
If...  
Try...  
- you don’t hear a dial tone  
- the display says Registration Failed  
Making sure the handset is  
fully charged, then starting  
over at step 1.  
Registering Repeaters  
If you are having trouble with a repeater or if you want to replace one,  
you need to register the repeater to the base.  
TIP: Connect the repeater close to the base for easy access to the  
necessary keys and indicators. Locate the repeater in the desired  
position after registration is complete.  
1. On the base, press and hold  
fIND when the phone is in  
standby.  
2. On the bottom of the repeater  
you want to register, press and  
hold the registration button  
until the LINk light blinks  
rapidly.  
3. In about 90 seconds, the LINK light on the  
repeater will turn on. The repeater has been  
registered to the base.  
If the LINK light doesn't turn on, try these steps  
again.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- Only register one repeater at a time. If more than one  
repeater is in registration mode at the same time then they  
can interfere with each other.  
- Only register a repeater to one base at a time. If more than  
one base is in registration mode at the same time then you  
can't control which base the repeater registers to.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AC Adapter and Baꢂery Informaꢁon  
x
x
x
x
Use only the supplied AC adapters. Be sure to use the proper  
adapter for the base and any chargers.  
Do not place the power cord where it creates a trip hazard or  
where it could become chafed and create a fire or electrical hazard.  
Do not place the unit in direct sunlight or subject it to high  
temperatures.  
Fully charged, the battery should provide about 10 hours of talk  
time and about 7 days of standby time. For best results, return the  
handset to the cradle after each call to keep it fully charged.  
x
When the battery gets too low, the handset shows a low battery  
alert. If you hear a strange beep during a call, check the display: if  
you see the low battery alert, finish your conversation as quickly  
as possible and return the handset to the cradle. If the handset is  
in standby, none of the keys will operate.  
x
With normal use, the battery should last about one year. Replace  
the battery when the talk time becomes short even when the  
battery is charged. To buy a replacement battery, visit our website;  
Zealand.  
Rechargeable Nickel-Metal-Hydride Baꢀery Warning  
This equipment contains a rechargeable Nickel-Metal-Hydride battery.  
The rechargeable batteries contained in this equipment may explode if  
disposed of in a fire.  
Do not short-circuit the battery.  
Do not charge the rechargeable battery pack used in this equipment in any  
charger other than the one designed to charge this battery pack as specified  
in the owner's manual. Using another charger may damage the battery pack  
or cause the battery pack to explode.  
Rechargeable Batteries Must Be Recycled or Disposed of Properly.  
Uniden works to reduce lead content in PVC coated cords in our  
products & accessories.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I
InDEX  
Insert 0 .................................16  
Installing the Phone................1  
Intercom...............................23  
A
Answering a Call...................17  
Answering System................25  
K
B
Key Touch Tone....................15  
Base Unavailable ..................36  
Baꢂery Install ........................1  
Baꢂery Informaꢁon..............39  
Bluetooth........................2, 3, 4  
Keypad Lock..........................12  
L
Liquid Damage......................35  
Low Baꢂery Alert..................39  
C
Caller ID................................19  
Call Waiꢁng ..........................18  
Conferencing ........................22  
Controls & Parts of the Phone. .  
....................................9, 11  
M
Making a call ........................17  
Making a call from a Caller ID  
Record.............................20  
Message Alert...................... 26  
Muꢁng the Microphone.......17  
Muꢁng the Ringer ................17  
D
Day and Time........................15  
Deleꢁng a Redial Record ......20  
Deleꢁng Caller ID Numbers..20  
Deleꢁng Phonebook Entries. 21  
Deregistraꢁon ......................36  
Do Not Disturb .....................24  
O
Out of Range ........................34  
P
Personal Ring........................15  
Phonebook .....................16, 20  
Placing a Call on Hold ...........17  
Privacy Mode........................22  
E
Earpiece Volume ............11, 18  
Entering Text from the Phone..  
........................................16  
R
Redialing a Number..............19  
Register Handset ..................36  
Register Repeater.................37  
Repeaters ...............................6  
Reseꢀng the Handset..........36  
Ringer Tones.........................15  
Ringer Volume..........10, 11, 18  
F
Finding a handset .................22  
H
Handset Banner....................15  
Hanging up ...........................17  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S
Screening calls................26, 29  
Security Code .................25, 29  
Speaker Volume .......10, 11, 18  
T
T-coil ........................14, 15, 34  
Talk and Standby Times .......39  
Transferring a Call ............... 23  
Troubleshooꢁng ...................31  
V
Voice Mail.............................25  
Voice Message Waiꢁng  
Indicator Reset .........16, 25  
W
Wall Mount the Repeater/  
Charger..............................5  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WaRRanTy  
One-year limited warranty  
This product comes with a one year limited warranty. Please  
refer to our Uniden website for any details or warranty durations  
offered in addition to those contained below.  
unIDEn XDECT R035BT  
IMPORTANT Evidence of the original purchase is required for  
warranty service.  
Warrantor: Uniden Australia Pty Limited ABN 58 001 865 498  
Uniden New Zealand Limited  
Elements of Warranty: Uniden warrants to the original retail  
owner for the duration of this warranty its UNIDEN XDECT R035BT  
(hereinafter referred to as the Product), to be free from defects in  
materials and craftsmanship with only the limitations or exclusions  
set out below.  
Warranty Duration: This warranty to the original retail owner only is  
only valid in the original country of purchase and shall be of no further  
effect 1 year after the date of original retail sale. This warranty will  
be deemed invalid if the Product is: (A) Damaged or not maintained  
as reasonable and necessary, (B) Modified, altered or used as part of  
any conversion kits, subassemblies, or any configurations not sold  
by Uniden, (C) Improperly installed, (D) Repaired by someone other  
than an authorized Uniden Repair Agent for a defect or malfunction  
covered by this warranty, (E) Used in conjunction with any equipment  
or parts or as a part of a system not manufactured by Uniden. (F) Only  
available in the original country of sale.  
Parts Covered: This warranty covers for one (1) year, the Product and  
included accessories.  
Statement of Remedy: In the event that the Product does not  
conform to this warranty at any time while this warranty is in effect,  
the warrantor, at its discretion, will repair the defect or replace the  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product and return it to you without charge for parts and service.  
This warranty does not provide for reimbursement or payment of  
incidental or consequential damages. This EXPRESS WARRANTY is  
in addition to and does not in any way affect your rights under the  
TRADE PRACTICES ACT 1974 (Cth) (Australia) or the CONSUMER  
GUARANTEES ACT (New Zealand).  
Procedure for obtaining performance or warranty: in the event  
that the Product does not conform to this warranty, the Product  
should be shipped or delivered, freight prepaid, with evidence of  
original purchase (e.g. a copy of the sales docket) to the warrantor at:  
UNIDEN AUSTRALIA PTY LTD  
Service Division  
UNIDEN NEW ZEALAND LTD  
Service Division  
345 Princes Highway,  
Rockdale, NSW 2216  
Fax (02) 9599 3278  
150 Harris Road, East Tamaki,  
Manukau 2013  
Fax (09) 274 4253  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2010 Uniden Australia Pty Ltd/Uniden New Zealand Limited  
Printed in Vietnam UNZZ01156BZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Cassette Player DA 20 User Manual
Taylor Wheelchair C810 User Manual
Technicolor Thomson CRT Television 2 1 D U 2 1 C User Manual
Technicolor Thomson Stereo System DPL580HT User Manual
Topcom Answering Machine AGIA User Manual
Toshiba DVD Player SD P2500 User Manual
U Line Ice Maker Refrigerator Ice Maker Combos User Manual
Uniden Cordless Telephone EXA3955 User Manual
Volvo Automobile 2008 S40 User Manual
VTech Telephone CS6419 2 User Manual