Contents
Answering Device Remote Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Handset Controls and Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Base Unit Controls and Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Battery Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Included with the XCA650 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Important Electrical Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Telephone Line Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radio Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
More Than One Cordless Telephone . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Telephone Line Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting the Telephone Cords. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Applying Power to the Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adapter Safety Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Desk or Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Wall Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Direct Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Extending the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Installing the Handset Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cleaning the Battery Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Charging the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Low Battery Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting the Pulse/Tone Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting Ringer/Volume Controls . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Automatic Digital Code Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Making and Receiving Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing Channels, Flash, and Page/Find . . . . . . . . . . . . . . . . . . . 32
Programming Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Storing a Number in Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Storing a Mixed Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Dialing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Chain Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Erasing a Stored Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
The Integrated Answering System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Answering System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock, and
injury to persons:
1.
2.
3.
Read and understand all instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning, and use a dry cloth,
without liquid or aerosol cleaners.
4.
5.
6.
Do not use this product near water; for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
Do not place this product on an unstable cart, stand, or table. The telephone
may fall, causing serious damage to the unit.
Slots and openings in the cabinet and the back or bottom are provided for
ventilation. To protect the product from overheating, these openings must not
be blocked or covered. This product should never be placed near or over a
radiator or heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.
7.
This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your
home, consult your dealer or local power company.
8.
9.
Do not allow anything to rest on the power cord. Do not locate this product
where the cord will be damaged by persons walking on it.
Do not overload wall outlets and extension cords, as this can result in the risk of
fire or electrical shock.
10. Never push objects of any kind into this product through cabinet slots, as they
may touch dangerous voltage points or short out parts that could result in a risk
of fire or electric shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product. Take it to
qualified service personnel when service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the operating
instructions. (Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage
and will often require extensive repair work by a qualified technician.)
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
Battery Safety Precautions
Caution: To reduce the risk of fire or injury to persons by the battery, read and
follow these instructions:
1.
2.
3.
4.
Use only the appropriate type and size Battery Pack specified in this Operating
Guide.
Do not dispose of the Battery Pack in a fire. The cell may explode. Check the
Nickel-Cadmium Battery Disposal package insert for disposal instructions.
Do not open or mutilate the Battery Pack. Released electrolyte is corrosive and
may cause damage to the eyes or skin. It may be toxic if swallowed.
Exercise care in handling the battery in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
5.
6.
Charge the Battery Pack provided with or identified for use with this product
only in accordance with the instructions and limitations specified in the
instruction manual provided for this product.
Observe proper polarity orientation between the Battery Pack and battery
charger.
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on your purchase of the Uniden XCA650 Cordless
Telephone. This phone is designed to exacting standards which provide
reliability, long life, and outstanding performance.
Features
•
•
•
•
•
•
•
25 Channels
AutoTalk
AutoStandby
Speakerphone
Pulse/Tone Dialing
10-Number Memory
Redial/Flash Key
•
•
•
•
•
•
•
Random Code Digital Security
UltraClear Plus
AutoSecure
Page/Find Button
Base/Handset Volume Controls
Talk/Battery Low Indicator
14 Day Battery Life
AutoTalk allows you to answer a call by just removing the Handset from
the Base so you don’t have to waste time pushing buttons or flipping
switches. AutoStandby allows you to hang up by simply returning the
Handset to the Base.
The UltraClear Plus innovative technology, together with 25 different
channels, virtually eliminates background noise and provides you with the
best possible reception during all of your conversations.
To protect you against misbilled calls which might result from your phone
being activated by other equipment, Random Code digital security
automatically selects one of over 65 thousand digital security codes for the
Handset and Base Units. Also, the AutoSecure feature electronically locks
your phone when the Handset is in the Base.
To get the most from your phone, please read this Operating Guide
thoroughly. Also be sure to complete the Product Registration form and mail
it in.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Included with the XCA650
If any of these items are missing or damaged, contact Uniden Customer
Service at: (800) 297-1023, 8:00 am to 5:00 pm Central, Monday through
Friday.
talk
talk
remote
batt
lo
w
tone
?
mem
ringe
r
chan
flash
pause
redial
Handset
Base Unit
Rechargeable Battery
Long Telephone Cord
Short Telephone Cord
AC Adapter
Operating
®
Guide
Operating Guide
Other Printed Material
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and damage
any device connected to it. This phone is no exception.
Warning: Please do not attempt to unplug any appliance during an electrical storm.
Caution: Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by this Operating Guide, could void your authority to operate this
product.
Range
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications set forth by
the FCC. We have rated this phone to operate at a maximum distance with
the qualification that the range depends upon the environment in which the
telephone is used. Many factors limit range, and it would be impossible to
include all the variables in our rating. The Maximum Range rating of this
phone is meant to be used as a means of comparison against other range
claims.
Telephone Line Problems
The FCC has granted the telephone company the right to disconnect service
in the event that your phone causes problems on the telephone line. Also,
the telephone company may make changes in facilities and services which
may affect the operation of your unit. However, your telephone company
must give adequate notice in writing prior to such actions to allow you time
for making necessary arrangements to continue uninterrupted service.
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your problem. If you
determine that it is the cause, you must leave it disconnected until the
trouble has been corrected.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Interference
Radio interference may occasionally cause buzzing and humming in your
cordless Handset, or clicking noises in the Base Unit. This interference is
caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around your
home to see what appliances may be causing the problem. In addition, we
recommend that the Base not be plugged into a circuit that also powers a
major appliance because of the potential for interference. Be certain that the
antenna on the unit is fully extended when needed.
In the unlikely event that you consistently hear other voices or distracting
transmissions on your phone, you may be receiving radio signals from
another cordless telephone or other source of interference. If you cannot
eliminate this type of interference, you need to change to a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless telephone
should not be placed near or on top of a TV or VCR. If interference is
experienced, moving the cordless telephone farther away from the TV or
VCR will often reduce or eliminate the interference.
More Than One Cordless Telephone
If you want to use more than one cordless telephone in your home, they
must operate on different channels. Press the channel key to select a
channel that provides the clearest communication.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Selecting a Location
Before choosing a location for your new phone, there are some important
guidelines you should consider:
•
The location should be close to both a phone jack and continuous power
outlet.
Note: A continuous power outlet is an AC outlet which does not have a
switch to interrupt its power.
•
Keep the Base Unit and Handset away from sources of electrical noise
such as motors or fluorescent lighting.
•
•
Be sure there is sufficient space to fully extend the Base Unit antenna.
The Base Unit can be placed on a desk or tabletop or mounted on a
standard AT&T or GTE wall plate.
•
•
If you decide to mount your phone on the wall, make sure to change the
Handset Retainer so that the tab which holds the Handset faces up. (See
page 19 for more information.)
You should charge your new phone for 15-20 hours before completing the
installation or using the Handset.
Telephone Line Outlets
There are two types of phone outlets:
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords
are fitted with a molded plastic connector which plugs into this type of jack.
If you do not have modular phone jacks, contact your local telephone
company for information about their installation.
Hard-wired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of installation is
not difficult; however, you should contact your Uniden telephone dealer or
a telephone supply store for advice about the proper adapter or converter
for your particular situation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
CAUTION:
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected.
•
Use caution when installing or modifying telephone lines.
Applying Power to the Base Unit
All the XCA650 phones require an AC outlet, without a switch to interrupt
power, and the included AC Adapter. To relieve strain on the DC plug when
the phone is placed on a desk or table, connect the adapter as shown below.
–
+
+
Wrap the power cord around the convenient
notch on the bottom.
Important: Place the power cord so that it does not create a trip hazard, or where it
could become chafed and create a fire or other electrical hazards.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adapter Safety Feature
The AC Adapter furnished with this phone may be equipped with a polarized
line plug — a plug having one blade wider than the other. This plug will fit
into the power outlet only one way. If you are unable to insert the plug fully
into the outlet, try reversing the plug.
Do not alter the shape of the
blades of the polarized plug.
Desk or Tabletop Installation
1.
Place the Base on a desk or
tabletop.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Plug one end of the long
telephone cord into the TEL LINE
jack on the Base Unit.
RING VOL
OFF-LO-HI
PULSE-TONE DC IN 9V
TEL LINE
Plug the AC Adapter cord into
the 9V DC input jack on the
Base Unit.
RING VOL
OFF-LO-HI
PULSE-TONE DC IN 9V
Place the AC Adapter cord
around the strain relief.
9V
–
+
PULSE-TONE DC IN
RING VOL
OFF-LO-HI
TEL LINE
+
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
Plug the other end of the cord
into the telephone jack on the
wall.
6.
Plug the AC Adapter into a
standard 120V AC wall outlet.
Note: Do not use an outlet
controlled by a wall switch.
Use only the Uniden AC
Adapter supplied with this phone.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Installation
Standard Wall Plate Mounting
These phones are designed to be mounted on a standard AT&T or GTE wall
plate.
1.
Plug one end of the short
telephone cord into the TEL LINE
jack on the Base Unit.
RING VOL
OFF-LO-HI
PULSE-TONE DC IN 9V
TEL LINE
2.
Place the telephone cord inside
the molded channel on the
bottom of the Base Unit.
RING VOL PULSE-TONE DC IN 9V
OFF-LO-HI
+
TEL LINE
-
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Plug the AC Adapter into the
Base Unit.
RING VOL
OFF-LO-HI
PULSE-TONE DC IN 9V
4.
Place the AC Adapter cord
inside the molded channel.
RING VOL PULSE-TONE DC IN 9V
OFF-LO-HI
+
TEL LINE
-
5.
Plug the telephone cord into the
modular jack on the wall.
Place the Base Unit on the
posts of the wall plate and push
down until it’s firmly seated.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Plug the AC Adapter into a
standard 120V AC wall outlet.
Note: Do not use an outlet
controlled by a wall switch.
Use only the Uniden AC
Adapter supplied with this phone.
Direct Wall Mounting
If you do not have a standard wall plate, you can mount your phone directly
on a wall. Before mounting your phone, consider the following:
•
Select a location away from electrical cables, pipes, or other items behind
the mounting location that could cause a hazard when inserting screws into
the wall.
•
•
Make sure the wall material is capable of supporting the weight of the Base
Unit and Handset.
Use #10 screws with anchoring devices suitable for the wall material where
the Base Unit will be placed.
1.
Insert two mounting screws
3/16 IN.
315
⁄16 inches apart. Allow about
3
⁄16 of an inch between the wall
and screw heads for mounting
the phone.
3 15/16 IN.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Plug one end of the long
telephone cord into the TEL LINE
jack on the Base Unit.
RING VOL
OFF-LO-HI
PULSE-TONE DC IN 9V
TEL LINE
Place the cord inside the
molded channel on the bottom
of the Base Unit.
RING VOL PULSE-TONE DC IN 9V
OFF-LO-HI
+
TEL LINE
-
Plug the AC Adapter into the
Base Unit.
RING VOL
OFF-LO-HI
PULSE-TONE DC IN 9V
17
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
7.
Place the AC Adapter cord
inside the molded channel.
RING VOL PULSE-TONE DC IN 9V
OFF-LO-HI
+
TEL LINE
-
Place the Base Unit on the
screws and push down until it’s
firmly seated.
Plug the other end of the
telephone line cord into the wall
jack.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8.
Plug the AC Adapter into a
standard 120V AC wall outlet.
Note: Do not use an outlet
controlled by a wall switch.
Use only the Uniden
AC Adapter supplied with this
phone.
Setting the Handset Retainer
The Handset Retainer holds the Handset in place if your phone is mounted
on a wall. The steps below describe how to remove and replace the retainer
so that the tab faces up.
1.
Push up on the Handset
Retainer on the Base Unit, and
slide the tab out.
25 CHANNEL
2.
Flip the retainer over so the tab
faces up.
25 CHANNEL
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Put the retainer back into its slot
on the Base Unit.
25 CHANNEL
4.
Push down on the Handset
Retainer until it snaps into place.
25 CHANNEL
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your Phone
Extending the Antenna
Before using your phone, be sure to raise the antenna to the vertical position.
RING TIME
REC TIME
Installing the Handset Battery Pack
1.
Press in on the Battery Cover
Release.
charge
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Slide the battery compartment
cover down.
Align the plastic connector of the
Nickel-Cadmium battery pack
with its socket and plug it in.
Note: The black lead will be on
the left when the plug is properly
aligned.
Place the battery pack inside the
battery compartment, and slide
the battery cover back on.
Note: The built-in Memory Backup feature allows up to 3 minutes to disconnect the
old battery pack and install a new one without losing any numbers stored in
memory.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Battery Contacts
To maintain a good charge, it is important to clean all charging contacts on
the Handset and Base Unit about once a month. Use a pencil eraser or other
contact cleaner. Do not use any liquids or solvents.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery Pack
Initial Battery Charging
The rechargeable Nickel-Cadmium battery pack must be fully charged
before using your phone for the first time. We recommend that the battery
pack charge for approximately 15-20 hours, without interruption, before
plugging the phone line into your new phone.
1.
Place the Handset on the Base
Unit.
—or—
Hang the Handset on the cradle
when the phone is mounted on
a wall.
Note: Make sure to change the
Handset Retainer before
hanging up the phone.
TMIE
N/41
AN
RCE
TMIE
-ST
24-
RNIG
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Make sure the charge LED
lights. If the LED doesn’t light,
check to see that the AC
Adapter is plugged in, and that
the Handset is making good
contact with the Base Unit
charging contacts.
Low Battery Indicator
When the Battery Pack in the
Handset is very low and needs
to be charged, the talk/batt low
LED flashes.
Battery Memory Effect
Rechargeable batteries can develop a "memory" (reduced charge capacity)
caused by repeated charge and discharge cycles. The battery life will seem
to be shorter every time you use the unit.
To Avoid Memory Effect
At least once a month, operate the unit until the "Battery Low" indicator
appears. Avoid "topping off" the charge after using the phone for a short
time. Also, do not charge the Rechargeable Battery for extended periods of
time.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
If the talk/batt low LED begins to flash, the phone is programmed to limit its
functions to save power. The table below describes what to do to return your
phone to normal operation.
DURING A CALL
IN STANDBY MODE
None of the buttons will operate.
The Handset talk/batt low LED flashes
Only the Abutton operates.
The Handset beeps and the talk/batt
low LED flashes once every 3 seconds. once every 3 seconds.
Complete your call as quickly as
possible.
You will not be able to make a call.
Return the Handset to the Base Unit for
charging.
Return the Handset to the Base Unit for
charging.
Note: Allow 15 to 20 hours without any interruption for the Handset to fully recharge.
Setting the Pulse/Tone Switch
Be sure the PULSE/TONE switch is in the TONE position.
Note: Most phone systems are Tone dialing. Check with your local phone company
if you are not sure whether your system is Tone or Pulse dialing.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Ringer/Volume Controls
Handset Ringer Control
You can also select one of two
different ringer tones for the
Handset.
Press ringer to select a different
ringer tone when the phone is
not in use.
Handset Ringer Tone Select Button
Base Volume Controls
To adjust the Base Unit ringer
volume, move the
RING VOL-OFF LO HI switch to the
desired setting.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
To adjust the Base speaker
volume, press the volume control
switch to achieve the desired
setting.
Automatic Digital Code Security
To avoid unauthorized calls on your phone, a Digital Code feature was
added to all XCA650 phones. This Digital Code is shared only between the
Handset and Base Unit. The code is set automatically when you first use the
phone.
To change the Digital Code, be sure the Handset is on the Base, then:
1.
Press page/find on the Base
Unit.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
After the Handset stops
beeping, remove it from the
Base Unit.
3.
Wait 5 seconds then place the
Handset on the Base Unit.
The charge LED will blink
quickly, indicating that the code
has changed.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
If the Base Unit loses power while the Handset is off the Base, the Digital
Code may be erased. When this happens, the Handset will not function. To
reestablish communication between the Handset and Base Unit:
1.
2.
3.
Restore power to the Base Unit.
Place the Handset back on the
Base Unit.
The charge LED will blink
quickly, indicating that the
Digital Code has been reset.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone
Making and Receiving Calls
The following features of the XCA650 phone are different depending on the
Handset’s location when you make or receive a call.
HANDSET ON
BASE
HANDSET OFF
BASE
ANSWER
CALL
Pick up Handset
(AutoTalk)
Press talk on the Base Unit.
1) Pick up Handset
2) Press A
MAKE
CALL
Note: You must use the
Handset to make a call.
3) Listen for dial tone
4) Dial the number
Press speaker on the Base Unit
Press A
— OR —
HANG
UP
— OR —
Return Handset to
Base
(AutoStandby)
Return Handset to Base
(AutoStandby)
1) Pickup Handset
2) Press A
REDIAL
Note: You must use the
Handset to make a call.
3) Listen for dial tone
4) Press F
Note: Sometimes when you press Ato hang up the phone, you may get an error
tone and the phone will not disconnect. If this happens, place the Handset
on the Base Unit or press Aagain while holding the Handset close to the
Base Unit.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Channels, Flash, and Page/Find
To change channels or access call waiting while the phone is in use, or to
use the one-way page to locate the Handset, follow these steps:
HANDSET
BASE UNIT
Note: You must use the
Handset to change channels.
Press C
CHANGING
CHANNELS
Note: Change channels to help
eliminate background noise.
If the call waiting tone sounds,
press
call.
to accept the waiting
F
Note: The Base Unit does not
FLASH
— OR —
have
. You must use the
F
Handset for call waiting and to
make a call.
If you have finished a call and
want to make another call,
press F to hang up and get a
dial tone.
Note: When page/find is
Press page/find on the Base
PAGE/FIND pressed on the Base Unit, the
Unit to locate the Handset.
Handset beeps.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Phone
For convenience, the Handset has ten memory locations so you can store
the numbers you use most often in either place. Just remember that all
programming functions must be completed when your phone is in the
standby mode, since the programming keys do not function while you are on
the phone.
Storing a Number in Memory
Use these keys
to store a
number in
memory with the
Handset.
Note: An error
tone will sound
and the
programming
procedure will be
canceled if more
than 20 seconds
elapse between
each keystroke
1.
Remove the Handset from the
Base Unit.
2. Press M .
The talk/batt low LED blinks.
3.
Enter the number you want to
store (up to 16 digits).
5551212
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
If a pause is needed during
9P
5551212
dialing to access a long distance
service, press
.
P
P button counts as one digit and lasts three seconds. Pressing
Note: The
P
more than once increases the length of the pause between numbers .
5.
6.
Press M again.
Enter the memory location (0-9).
A tone indicates that the number
is stored.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing a Mixed Number
If your phone is set up for Pulse dialing, you can store a mixed mode number
so that you can easily access long distance services.
Use these keys
to store a mixed
mode number in
memory with the
Handset.
Note: An error
tone will sound
and the
programming
procedure will be
canceled if more
than 20 seconds
elapse between
each keystroke
1.
Remove Handset from the Base
Unit.
2. Press M .
The talk/batt low LED blinks.
3.
Enter the number to be dialed in
pulse mode.
5551212
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Press tone on the Handset.
5.
6.
Enter the number to be dialed in
tone mode.
3300
If a pause is needed during
dialing to access a long distance
P3300
service, press
.
P
P button counts as one digit and lasts three seconds. Pressing
Note: The
P
more than once increases the length of the pause between numbers .
7.
8.
Press M again.
Enter the memory location (0-9).
A tone indicates that the number
is stored.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing a Stored Number
To dial a number previously stored in memory, follow these steps:
1.
2.
3.
Remove the Handset from the
Base Unit.
Press A.
Press M .
37
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Press the memory location
number (0-9).
Chain Dialing
On certain occasions, after dialing a number, you may be requested by the
party or service you are calling to enter a special access code, such as when
performing a banking transaction. To do this, simply:
1.
2.
Store the access code into one of the memory numbers.
Dial the main number.
3. At the appropriate time, press M followed by the memory location number
where the access code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory location (0-9), follow these
steps:
1.
2.
Remove the Handset from the
Base Unit.
Press M twice.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Press the memory location
number (0-9).
A tone indicates the number is
erased.
Note: An error tone will sound and the erase procedure will be canceled if more
than 20 seconds elapse between each keystroke entry or step.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
The Integrated Answering System
The XCA650 has a built-in Answering System which answers incoming
calls and records your messages. You can also use your new Answering
System to record a conversation, leave a memo message for someone else
who will use the phone, or to announce a special message when you’ll be
away from your phone.
Features
•
•
•
•
•
Digital Tapeless Recording
Remote Operation from Handset
Selectable Outgoing Messages
Voice-Guided Help Menu
Time and Day Stamp
•
•
•
•
•
15 Minutes Record Time
Call Screening
Calling Party Control
Built in Flash Memory Backup
Toll Saver
Digital Tapeless Recording allows you to quickly review your messages,
saving or deleting the messages you choose. You’ll never have to worry
about a tape wearing out or resetting properly.
There is also a Voice-Guided Help Menu available when operating the
remote keys from the Handset. By simply pressing one button, you can
review all of the function keys on the Handset. You won’t have to worry
about finding a quick reference card because help is really at your fingertips.
Your XCA650 is an advanced, integrated system which offers you
maximum flexibility, but please read through the sections that explain all of
the features before using your Answering System.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Setup
Turning the Answering System On/Off
Handset Operation
1.
2.
3.
To turn the Answering System
on, press
.
R
The talk/batt low LED lights
green. The current Time and
Day Stamp and number of new
messages recorded is
announced in the Handset
receiver.
Press
.
5
You will hear a tone in the
Handset followed by the
announcement: “Answering
System on.”
Press
again to return to
R
Standby.
The talk/batt low LED turns off.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
5.
6.
To turn the Answering System
off, press
.
R
The talk/batt low LED lights
green. The current Time and
Day Stamp and number of
messages recorded is
announced on the Handset
receiver.
Press
.
5
You will hear a tone in the
Handset followed by the
announcement: “Answering
System off.”
Press
again to return to
R
Standby.
The talk/batt low LED turns off.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Operation
1.
To turn the Answering System
on, press answer.
A tone sounds, and the current
outgoing message plays on the
Base Unit speaker. A second
tone sounds to indicate the unit
is ready to answer calls, and the
Message Counter LED turns on.
2.
To turn the Answering System
off, press answer again.
A tone sounds and the Message
Counter LED turns off.
Setting the Clock
The clock in your XCA650 Answering System starts when power is applied
to the Base Unit. Follow these steps to set the clock to the correct time.
1.
Press
on the Handset.
R
The talk/batt low LED lights
green.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Press *.
Then enter the number which
corresponds to the day.
3.
4.
Enter the two-digit number for
the hour (01-12) and the minute
(00-59).
To set AM, press
.
8
To set PM, press #.
Note: A beep indicates the new
time is programmed, and the
new Time and Day Stamp is
announced in the Handset
receiver.
5.
6.
Press
to return to
R
Standby.
For example, to set Tuesday at
3:20 PM, press
by these keys.
30320#
*
followed
R
Note: Remember to press
again to return to
Standby.
R
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing Time and Day Stamp
Handset Operation
1.
2.
3.
Press
to hear the
currenRt Time and Day Stamp.
The Handset beeps and the
Time and Day Stamp is
announced, followed by the total
number of messages stored in
memory. The talk/batt low LED
lights green.
Press
to replay the current
6
Time and Day Stamp while
using the remote keys .
The Handset beeps and the
Time and Day Stamp is
replayed.
Press
Standby.
again to return to
R
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Operation
1.
Press
.
6
The speaker beeps, and the
Time and Day Stamp is
announced.
Setting Your Outgoing Message (OGM)
When you receive a call, the Answering System answers and automatically
plays either a preset message or your personal Outgoing Message.
Preset Messages
The XCA650 has two messages programmed in its memory. If the
REC TIME/ANN/4/1 switch is in either the four or one position, the first
preset message below plays. Incoming messages are limited to four or one
minute respectively. If the switch is set in the left position, (i.e., the
“Announce Only” position) the second message below plays, and no
incoming messages are recorded.
•
•
Hello. No one is available to take your call. Please leave your message
after the tone.
Hello. No one is available to take your call.
Note: If the REC TIME/ANN/4/1 switch is in the “Announce Only” position, the
Message Counter LED displays an A when the system is in Standby.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Your Personal OGM
Handset Operation
1.
Press
.
R
The
talk/batt low LED lights
green.
2.
Press
.
7
Note: You can leave up to a
60-second outgoing message.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Press
to stop recording.
6
The message replays in the
Handset receiver.
4.
Press
again to return to
R
Standby.
The talk/batt low LED turns off.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Operation
1.
To record an outgoing message,
press and hold ogm.
Start recording your message
after you hear the long tone and
the Message Counter LED
begins to count up.
2.
Do not get closer than twelve
inches from the microphone,
and speak clearly while
recording your message. When
you are finished recording,
release ogm.
You hear a tone, and your
message is played on the Base
Unit speaker. The Message
Counter LED resets to zero.
Note: You can leave up to a
60-second outgoing message.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Preset OGM
After you have recorded an outgoing message, you can set your Answering
System to play either a preset message or your outgoing message.
1.
Press ogm.
Your recorded outgoing
message will begin to play.
2. While your recorded outgoing message is playing, press ogm again.
A tone will sound, and you hear the preset message “Hello. No one is available
to take your call, please leave your message after the tone” on the Base Unit
speaker. A second tone sounds after the preset message plays, and the
Answering System automatically returns to Standby.
Note: If the REC TIME/ANN/4/1 switch is set to Announce Only, then the
preset message “Hello. No one is available to take your call” is played.
3.
To select your recorded
message again, press ogm.
The preset message will begin
to play on the Base Unit speaker.
4. While the preset message is playing, press ogm again.
A tone will sound, and your recorded message will play on the Base Unit
speaker. A second tone sounds after your message plays, and the Answering
System automatically returns to Standby.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
VOX/Calling Party Control Feature
The Calling Party Control (CPC) feature sets your Answering System to
disconnect and reset if the caller hangs up before leaving a message. This
prevents your Answering System from using recording time to record a hang
up/dial tone message.
Setting the Toll Saver Switch
The Ring Number/Toll Saver switch allows you to set the number of rings
the caller hears before your Answering System answers. You can set the
switch to answer after 2 rings or after 4 rings. In the TS (Toll Saver) position,
the Answering System answers after two rings if you have messages
recorded, and it answers after four rings if there are no messages. So if you
call long distance to check your messages, you can hang up after the
second ring and not be billed.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Reset Button
The RESET button is used to erase all recorded outgoing messages and any
messages which are saved in memory. Pressing RESET does not erase
your PIN (Personal Identification Number) code or the security code between
the Handset and Base Unit.
When RESET is pressed, the Message Counter
begins to flash.
Note: The RESET button may also be used in the unlikely event that an AC power
line disturbance causes the answering system to malfunction and become
inoperative.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Answering System
Playing New Messages
Handset Operation
1.
2.
3.
Press
.
R
The current Time and Day
Stamp and number of stored
messages is announced.
Press 8.
The time and day each
message was received is
announced after the message is
played.
Note: If you want to stop
reviewing your messages, press
.
6
When all messages have
played, a long tone sounds
followed by the announcement
“End of messages” plays.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Press
to return to
R
Standby.
The talk/batt low LED goes off.
Base Operation
1.
Press 8
.
The time and day each
message was received is
announced after the message is
played, and the Message
Counter LED displays the
number of the message playing.
Note: If you want to stop
reviewing your messages, press
the
.
6
2.
When all messages have
played, a long tone sounds
followed by the announcement
“End of messages” plays.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
After the end of message
announcement another tone
sounds, indicating the system
has automatically returned to
Standby.
The new message LED stops
flashing, indicating that all of the
new messages have been
reviewed and stored.
Playing a Stored Message
Handset Operation
1.
Press
.
R
2.
Press
.
2
The first message stored begins
playing.
The time and day each
message was received is
announced after the message is
played.
Note: If you want to stop
reviewing your messages, press
.
6
55
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
When all messages have
played, a long tone sounds
followed by the announcement
“End of messages” plays.
4.
Press
to return to
R
Standby.
The talk/batt low LED goes off.
Base Operation
1.
Press
.
2
The first message stored begins
playing.
The time and day each
message was received is
announced after the message is
played. The Message Counter
LED displays the number of the
message playing.
Note: If you want to stop
reviewing your messages, press
.
6
56
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
When all messages have
played, a long tone sounds
followed by the announcement
“End of messages” plays.
3.
After the end of message
announcement another tone
sounds, indicating the system
has automatically returned to
Standby.
Repeating a Message
Handset Operation
1.
Press
.
R
57
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Press
to review your
messa2ges.
Press
messa1ge.
at anytime to replay a
Note: Pressing
message returns the system to
the beginning of that message.
during a
1
Pressing
again before the
message1replays causes the
system to scan back one
message. If you have several
messages, press
return to the message you want
to replay.
until you
1
To return to Standby,
press
.
R
The talk/batt low LED goes off.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Operation
1.
2.
3.
Press
to review your
messa2ges.
Press
messa1ge.
at anytime to replay a
Note: Pressing
during a
1
message returns the system to
the beginning of that message.
Pressing repeat again before
the message replays causes the
system to scan back one
message. If you have several
messages, press
return to the message you want
to replay.
until you
1
Press
at anytime to stop
review6ing messages and return
to Standby.
The new message LED remains
on, and the Message Counter
LED shows the total number of
messages.
Note: The system will
automatically return to Standby
if all the messages play.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping a Message
Handset Operation
1.
2.
3.
Press
.
R
Press
messa2ges.
to review your
Press
the next message.
at anytime to skip to
3
Note: Each time
is pressed
3
the system scans forward one
message. If you have several
messages, press
until you
get to the messag3e you want to
play.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
To return to Standby,
press
.
R
The talk/batt low LED goes off.
Base Operation
1.
Press
to review your
messa2ges.
2.
Press
at anytime to skip to
3
the next message.
Note: Each time
is pressed,
3
the system scans forward one
message. If you have several
messages, press
until you
3
get to the message you want to
play.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Press
at anytime to stop
review6ing messages and return
to Standby.
The Message Counter LED
shows the total number of
messages.
Note: The system automatically
returns to Standby when all
messages play.
Deleting a Message
Handset Operation
1.
Press
.
R
.
2.
Press
to review your
messa2ges.
Note: You can press
when
8
you have received new
messages.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
If you decide to delete a
message, press
message.
during the
4
The system beeps and
immediately goes to the next
message.
Note: When you press
, you
4
are deleting the message. Once
the message is deleted, it
cannot be replayed.
4.
When the “End of messages”
announcement plays, you will
hear a series of quick warning
tones in the Handset followed by
a long tone.
Base Operation
1.
Press
to review your
messa2ges.
Note: You can press
when
8
you have received new
messages.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
If you decide to delete a
message, press and release
anytime during the message.4
The system beeps and
immediately goes to the next
message.
Note: When you press
, you
are deleting the messag4e. Once
the message is deleted, it
cannot be replayed.
4.
When the “End of messages”
announcement plays, you will
hear a long tone on the Base
speaker.
Deleting All Messages
You can delete all your messages without deleting each separate message.
To delete all the messages, you must use the delete button on the Base Unit.
1.
Press and hold
.
4
Note: You must review all
messages before using the
“Delete All Messages” function.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
You will hear three short tones,
followed by a longer tone.
Note: If you release the delete
button before all three short
tones sound, the messages are
not erased.
3.
A long tone sounds once the
messages are erased then an
announcement such as “Four
messages deleted” plays.
Note: The deletion
announcement above depends
on how many messages are
stored in memory.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Full Indication
The XCA650 has a maximum record time of approximately 15 minutes, or
up to 40 incoming messages. When the memory is full, the Answering
System will not record incoming calls. To return the system to normal
operation, follow these steps.
1.
When the memory is full, the
phone will ring 10 times before
the announcement “No
remaining time for incoming
messages” plays.
2.
You must review your
messages and then delete some
or all of the stored messages.
Voice-Guided Help Menu
If you are unsure of the commands available while using the Handset, you
can use the Voice-Guided Help Menu. The Handset commands are
reviewed for you on the Handset Receiver. To access the Help Menu, follow
these steps.
1.
Press
.
R
The talk/batt low LED lights
green.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Press ?.
A tone sounds, and the
Voice-Guided Menu begins to
play.
There are two ways to exit the
Help Menu — press
during the review or listen to all
the options and wait for the
system to automatically exit.
anytime
6
When you exit Help, you will
hear a short tone every three
seconds, indicating that the
system is in the Command
Waiting Mode. Press another
command, or press
return to Standby.
to
R
Note: You have 20 seconds to
enter another command while in
the Command Waiting Mode
before the system automatically
returns to Standby.
When you return to Standby, the
talk/batt low LED goes off.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Screening Incoming Calls
If you receive a call while your Answering System is on, you can listen to the
incoming message on the Base Unit speaker. If you are away from the Base,
you can use your Handset to screen incoming calls.
1.
2.
3.
Press
after the phone
R
begins to ring.
The talk/batt low LED lights
green.
You can now listen to the
outgoing message and incoming
message on the Handset
receiver. If you decide to answer
the call, press
.
A
Note: The Answering System
stops recording the incoming
message when
is pressed.
A
When you finish the call, press
to hang up.
A
The talk/batt low LED goes off.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Leaving a Memo Message
You can use the XCA650 to leave a Memo Message for someone else who
uses your Answering System.
1.
2.
3.
To record your Memo Message,
press and hold memo until you
hear a long tone and the
Message Counter LED begins to
count up.
Speak into the microphone.
When you are finished
recording, release the memo
Button.
There is a tone, and the
Message Counter begins to
flash. The Message Counter
LED shows the total number of
messages stored in memory.
After you have recorded your
message, the system returns to
Standby.
Note: If you have new or
unplayed messages, the
Message Counter LED on the
Base Unit continues to flash. If
all the messages have been
reviewed, the Message Counter
LED shows the number of
messages stored but does not
flash.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Telephone Conversation
To record a conversation during a call:
1.
Press
.
R
The talk/batt low LED changes
from red to green, and the
telephone sounds warning
beeps to let the other party
know that the call is being
recorded.
2.
To stop recording, press
again.
R
The talk/batt low LED changes
from green back to red.
Note: A recorded call is like a
message — if you use all of the
available record time, the
Recording function cancels
automatically.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation
You can operate your XCA650 while you’re away from home by calling from
any touch-tone phone. When using this feature, remember these important
guidelines.
•
•
You should change your Personal Identification Number (PIN) before using
your Handset. When you first apply power, the code is set to 00.
The dialing keys on a touch-tone phone work the same as the function
keys on your phone’s Handset except you must press # before
selecting a command.
•
You cannot change the Time and Day Stamp or your PIN code from a
touch-tone phone.
Setting Your PIN Code
Using the Handset, you can set a personal two-digit code (00 to 99) for your
PIN code. You must use your PIN code to access your Answering System
from a touch-tone telephone.
1.
Press R
.
The talk/batt low LED lights
green.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Press #.
3.
4.
Press your two-digit code.
22
For example, use 22 as
the new PIN number.
Press
again.
#
You will hear a long tone which
indicates that the new code is
saved.
5.
Press
again to return
R
to Standby.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Touch-Tone Phone
You can operate your Answering System using any touch-tone telephone.
Use this function to check for recorded messages, play or delete messages,
or even record a new outgoing message.
1.
2.
Call your telephone number.
During the outgoing message
playback, press # followed by
your PIN number.
For example, use 22 as
the new PIN number.
3.
4.
The Answering System
announces the Time and Day
Stamp followed by the number
of messages stored in memory.
You then hear intermittent
beeps indicating that the system
is in the Command Waiting
Mode.
Note: You must enter a
command within 20 seconds or
the Answering System hangs up
and returns to Standby.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
Use this chart to select the
function you want.
6.
When you’ve finished, hang up
to exit the system.
Your Answering System
automatically returns to Standby.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your XCA650 Integrated Telephone Answering Device is not performing
to your expectations, please try these simple steps. If you are still unable to
resolve the problems, contact Uniden Customer Service at (800) 297-1023,
8:00 a.m. to 5:00 p.m. Central, Monday through Friday.
Telephone Troubleshooting Chart
Problem
Suggestion
Charge light won’t come on when Handset is
placed in Base Unit.
• Make sure AC Adapter is plugged into the
Base Unit and wall outlet.
• Make sure Handset is properly seated in
Base Unit.
• Make sure that the charging contacts on the
Handset and Base Unit are clean.
Audio sounds weak and/or scratchy.
Can’t make or receive calls.
• Make sure that the Base Unit antenna is fully
extended and vertical.
• Move the Handset and/or Base Unit to
different locations and try again.
• Press chan to select another channel.
• Check both ends of the Base Unit telephone
line cord.
• Make sure the AC Adapter is plugged into
the Base Unit and wall outlet.
• Disconnect the AC Adapter for a few
minutes, and then reconnect it.
Handset doesn’t ring or receive a page.
• Nickel-Cadmium battery pack may be weak.
Charge the battery on the Base Unit for
15–20 hours.
• Extend the Base Unit antenna vertically.
• The Handset may be too far away from the
Base Unit.
• Place the Base Unit away from noise
sources.
• The Digital Security Code may be erased.
Set the Digital Code.
Base Unit doesn’t ring or receive a page.
• Set the Base Unit Ringer switch to LO or HI
.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Troubleshooting Chart
Problem
Suggestion
Answering System does not work.
• Make sure that the Base Unit is plugged in.
• Make sure the Answering System is turned
on.
• Press the RESET button to reset the system
after an AC line spike.
Answering System does not answer calls.
Messages are incomplete.
• Set the REC TIME/ANN/4/1 switch in either
the 4-minute or 1-minute position.
• The memory may be full. Delete some or
all of the saved messages.
• The incoming messages may be too long.
Remind callers to leave a brief message.
• The memory may be full. Delete some or
all of the saved messages.
After a power failure, the outgoing message is
deleted.
• The answering machine has a flash memory
with no battery backup. Record your
personal outgoing message again. The
default messages should still remain.
Message Counter LED flashes the letter
P.
• There has been a power failure. Press
RESET to reset the Answering System.
No sound on the Base Unit speaker during call
monitoring or message playback.
• Adjust the volume control on the side of the
Base Unit.
Cannot access remote call-in features from
another touch-tone phone.
• Make sure you’re using the correct PIN
number.
• Make sure that the touch-tone phone you’re
using can transmit the tone for at least two
seconds. If it cannot, you may have to
change to another phone.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General – The XCA650 complies with FCC Rules, Parts 15 and 68.
Frequency Control
Modulation
Phase Locked Loop (PLL) Synthesizer
FM
Operating Temperature
– 10° to 50° C
Base Unit
Receive Frequency
Transmit Frequency
Power Requirements
Size
48.76 to 49.99 MHz (25 Channels)
43.72 to 46.97 MHz (25 Channels)
120V AC 60 Hz
8 38 in. (W) x 5 17 in. (D) x 1 78 in. (H)
32
Weight
Approx. 18.9 oz.
Handset
Receive Frequency
Transmit Frequency
Power Requirements
Size
43.72 to 46.97 MHz (25 Channels)
48.76 to 49.99 MHz (25 Channels)
Rechargeable Ni-Cd Battery Pack
3
11
3
2 16 in. (W) x 2 in. (D) x 12 32 in. (H)
16
(w/ antenna)
Weight
Battery
Approx. 10 oz. (including battery)
BT-185
Capacity
270 mAh, 3.6V
Talk Mode
Standby Mode
6 hours
7 days
Battery Save
Mode
5 weeks
Answering System
Memory Type
Digital Tapeless Recording
Memory Capacity
Message Length
approx. 15 min. (40 messages)
1 min. or 4 min. Incoming Message (max.)
1 min. outgoing message (max.)
Specifications, Features, and availability of Optional Accessories are all
subject to change without prior notice.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
XCA650/655
Integrated Telephone
Answering Device
talk
talk
remote
batt
lo
w
tone
?
mem
ring
er
ch
a
n
flash
pause
redial
Operating Guide
UDZZ01369ZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Before you read anything else,
please observe the following:
WARNING!
Uniden America Corporation DOES NOT represent this unit to be waterproof.
To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT
expose this unit to rain or moisture.
RECHARGEABLE NICKEL-CADMIUM
BATTERY WARNING
This equipment contains a Rechargeable Nickel-Cadmium
Battery.
Cadmium is a chemical known to the State of California to
cause cancer.
The Rechargeable Nickel-Cadmium Battery contained in this
equipment may explode if disposed of in a fire.
Do not short circuit the battery.
Do not charge the Rechargeable Nickel-Cadmium Battery
used in this equipment in any charger other than the one
designed to charge this battery as specified in this Guide.
Using another charger may damage the battery, or cause
the battery to explode.
RECHARGEABLE NICKEL-CADMIUM
BATTERIES MUST BE RECYCLED OR
DISPOSED OF PROPERLY
Residents Of Minnesota should contact 1-800-225-PRBA for
information concerning reclamation and disposal of
Rechargeable Nickel-Cadmium batteries.
Residents outside of Minnesota should contact their local
authorities for information concerning reclamation and
disposal of Rechargeable Nickel-Cadmium batteries.
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering Device Remote Keys
1. Talk Button
2. Talk/Batt Low LED
11. Flash Button
12. Play Key
2
3
3. Remote Key
4. Repeat Key
5.
R
13. Skip Key
1
14. Answer System On/Off Key
5
6. MOGesMsaRgeecDoredleKteeyK7ey 4
7. Time/ Day Stamp Reset
8. Memory Store Button
9. Ringer/Pause Button
16.
8
?
15. Stop Key
6
*
17. OGM ReviewKey
Play New Messag9e Key
18. Voice Guided Help Key
19. PIN/Security Key
#
1D0o.wnload from Www.Somanuals.com. All Manuals Search And Download.
Channel Select Button
Handset Controls and Keys
1. Antenna
2. Talk/Battery Low
Indicator
3. Talk Button
A
4. Numeric Keypad
5. Tone Button
*
6. Memory
Programming
Button
M
7. Ringer Tone Select/
Pause Button
8. Microphone
9. Remote Button
R
10. Flash Button
F
/Redial Button
11. Channel Select
Button
C
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Unit Controls and Keys
1. Base Ringer Switch
2. Pulse/Tone Switch
3. DC Power Jack
4. Telephone Line Jack
5. Handset Retainer
6. New Message Button
7. Speakerphone Button and LED 19. Message Delete Button
8. Speaker
9. Message Counter LED
13. Record Time/Ann/4/1 Switch
14. Message Repeat Button
15. Message Skip Button
16. Message Play Button
17. Page/Find Button
18. Microphone
20. Outgoing Message Button
21. Memo Button
10. Speaker Volume Control Switch 22. Stop Button
11. In Use LED
12. Ring Time 2-4-TS Switch
23. Answer On/Off Button
Download from Www.Somanuals.com. All Manuals Search And Download.
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail
owner, this Uniden Product to be free from defects in materials and craftsmanship
with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of
no further effect 12 months after the date of original retail sale. The warranty is invalid
if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired
by someone other than an authorized Uniden service center for a defect or
malfunction covered by this warranty, (E) used in any conjunction with equipment or
parts or as part of any system not manufactured by Uniden, or (F) installed or
programmed by anyone other than as detailed by the Operating Guide for this
product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will repair the defect
and return it to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in connection with
the performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE
IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS
IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential damages so the
above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. This warranty is void outside the
United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in this Operating Guide you are certain that the Product is
defective, pack the Product carefully (preferably in its original packaging). Include
evidence of original purchase and a note describing the defect that has caused you
to return it. The Product should be shipped freight prepaid, by traceable means, or
delivered, to warrantor at:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Boulevard
Fort Worth, TX 76155
(800) 297-1023, 8 AM to 5 PM Central, Monday through Friday
Download from Www.Somanuals.com. All Manuals Search And Download.
Covered under one or more of the following patents:
4,511,761 4,523,058 4,595,795 4,797,916 5,426,690
®
©1997 Uniden America Corporation. All rights reserved.
Printed in the Philippines.
Download from Www.Somanuals.com. All Manuals Search And Download.
|