Uniden Cordless Telephone EXP 971 Series User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
The Uniden 900MHz cordless phones are designed and engineered to exacting standards  
for reliability, long life, and outstanding performance.  
NOTE: Some illustrations in this manual may differ from the actual unit for explanation  
purposes. The color of your cordless phone may vary.  
900MHz Extended Range  
Technology  
• 10-Number Memory  
Dialing  
• Earpiece Volume Control  
• AutoTalk™  
• 20 Channel Autoscan  
• Last Number Redial  
• Find Handset Locator  
• Hearing Aid Compatible  
• Pulse/Tone Dialing  
• One Touch RocketDial  
Number  
®
Features  
The cordless phone features include AutoTalk™ and AutoStandby™. AutoTalk allows you to  
answer a call by just removing the handset from the base so you don’t have to waste time  
pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the  
base.  
The UltraClear Plus™ true compander circuitry virtually eliminates background noise.  
This innovative technology, together with 20 different channels, provides you with the best  
possible reception during all your conversations.  
To protect you against misbilled calls which might result from your phone being activated by  
other equipment, the cordless phone has Random Code™ digital security which automatically  
selects one of approx. 262,000 digital security codes for the handset and base. Also, the  
AutoSecure™ feature electronically locks your phone when the handset is in the base.  
®
RocketDial is a one-touch speed dial key that automatically dials your most important or  
frequently called number. The number dialed, is a preset number stored by the user.  
®
®
Uniden and RocketDial are registered trademarks of Uniden America Corporation.  
AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of  
Uniden America Corporation.  
®
As an ENERGY STAR Partner, Uniden has determine that this product or  
®
product models meets the ENERGY STAR guidelines for energy  
®
efficiency. ENERGY STAR is a U.S. registered mark.  
Controls and Functions  
6. flash - accesses call waiting (if  
available) (p.6)  
1
7. /tone - switches to tone dialing in  
2
3
pulse dial mode (p.5)  
10  
11  
12  
4
5
6
8. redial/pause - redials the last number  
/ adds a timed pause in a memory  
dialing sequence. (p.4)  
15  
16  
17  
find hs  
9. Handset microphone and ringer  
7
8
speaker  
13  
9
10. talk - answers or places calls (p.4)  
14  
11. end - end phone call/temporarilly  
mutes incoming ring (p.4)  
1. Handset antenna  
2. Handset earpiece  
3. talk/batt low LED - indicates when  
phone is in use or the battery is low  
4. m/mem - enters or recalls numbers  
stored in memory dialing (p.6)  
5. v/ /vol - ringer tone and earpiece  
volume control (p.5)  
12. RocketDial - one touch priority key  
(p.7)  
13. channel - selects another channel for  
clearer reception (p.5)  
14. Handset charging contacts  
15. Base charging contacts  
16. find hs - locates the handset (p.6)  
17. charge / in use LED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Included with Your Phone  
• Base  
• Handset  
• AC Adapter  
Telephone Cord  
• Rechargeable Battery  
Replacement adapters, batteries and other parts may be purchased on Uniden’s website  
Setting up the Phone  
Do the following steps:  
A. Choose the best location  
C. Connect the base unit  
B. Install the rechargeable battery pack into the handset  
D. Choose the dialing mode  
A. Choose the best location  
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS  
included in the PRECAUTIONS.  
Here are some important guidelines you should consider:  
Avoid noise sources such as a window  
by a street with heavy traffic  
Avoid heat sources, such as  
radiators, air ducts, and sunlight  
Avoid microwave ovens  
Avoid television sets and  
Avoid excessive moisture,  
other electronic equipment  
extremely low temperatures,  
dust, mechanical vibration,  
or shock  
Avoid personal computers  
Choose a central location  
Avoid other cordless telephones  
• The location should be close to both a phone jack and a continuous power outlet which  
is not switchable.  
• Keep the base and handset away from sources of electrical noise such as motors and  
fluorescent lighting.  
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.  
B. Install the rechargeable battery pack into the handset  
The handset is powered by a rechargeable battery pack. The battery recharges  
automatically when the handset is placed in the base unit.  
Charge the handset battery pack for at least 15-20 hours before using your new cordless  
telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT  
plug the telephone cord into the base unit and wall jack until the battery is fully charged.  
NOTE: If your home has specially wired alarm equipment connected to  
the telephone line, be sure that installing the system does not  
disable your alarm equipment. If you have questions about what  
will disable your alarm equipment, contact your telephone  
company or a qualified installer.  
1) Press down on the handset battery case cover (use the finger  
indention for a better grip) and slide the cover downward to remove.  
2) Plug the battery pack connector (red & black wires) into the jack  
inside the battery compartment (the connector notches fit into the  
grooves of the jack only one-way). Match the wire colors to the  
polarity label in the battery compartment, connect the battery and  
listen for a click to insure connection.  
3) Before replacing the battery cover, make certain the battery pack is  
securely connected by slightly pulling on the battery wires. Then  
place the battery case cover back on the handset by sliding it  
upwards until it clicks into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
4) Place the handset in the base with the keypad facing forward.  
NOTE: For optimum performance use only the Uniden Battery  
(BT-904) supplied with your phone. Replacement batteries  
are also available through the Uniden Parts Department at  
(800) 554-3988, Monday through Friday from 8:00 a.m. to  
5:00 p.m. or online at www.uniden.com  
find hs  
Low Battery Alert  
When the battery pack is very low and needs to be charged, the phone is programmed to  
eliminate functions in order to save power. If the phone is not in use, the talk/batt low LED  
flashes when the battery pack is low.  
If the phone is in use, the talk/batt low LED flashes and the handset beeps. Complete your  
conversation as quickly as possible and return the handset to the base for charging.  
NOTE: Even when the battery pack is not being used, it will gradually discharge over a  
long period of time. For optimum performance, be sure to return the handset to the  
base unit after each telephone call.  
Dial mode setting, last number dialed and numbers stored in memory locations  
(including RocketDial), are retained for up to 1 minute while you replace the  
battery pack.  
Cleaning the battery charging contacts  
To maintain a good charge, it is important to clean the charging contacts on the  
handset once a month.  
Using water only, dampen a cloth to clean the charging  
contacts. Then make sure to go back over the charging  
contacts with a dry cloth before returning the handset to the  
base to charge.  
Caution: Do not use paint thinner, benzene, alcohol, or other  
chemical products. Doing so may discolor the surface of the  
telephone and damage the finish.  
C. Connect the base unit  
1) Connect the AC adapter to the DC IN 9V jack  
and a standard 120V AC wall outlet.  
2) Set the base unit on a desk or tabletop, and  
place the handset in the base unit.  
Route thhe cord.  
3) Make sure the charge/in use LED illuminates.  
If the LED does not illuminate, check to see that  
the AC adapter is plugged in and the handset  
makes good contact with the base charging  
contacts.  
NOTICE: Place the power cord so it does not  
create a trip hazard or where it could  
become chafed and create a fire or  
electrical hazard.  
NOTE: Use only the supplied AD-0001 AC adapter. Do not use any other AC adapter.  
Connect the AC adapter to a continuous power supply.  
Place the base unit close to the AC outlet so that you can unplug the AC adapter  
easily.  
After installing the battery pack in the handset, charge your handset at least 15-20 hours  
before plugging into the phone line.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4) Once the handset battery pack is fully charged,  
connect the telephone line cord to the TEL LINE  
jack and a telephone outlet.  
TIP:  
If your telephone outlet isn’t  
modular, contact your telephone  
company for assistance.  
Modular  
D. Choose the dialing mode  
Most phone systems use tone dialing which sends DTMF tones through the phone lines.  
However some phone systems still use pulse dialing such as in rural areas. The default  
setting is tone dialing. Depending on your dialing system, set the mode as follows:  
1) Press and hold the flash key until you hear a confirmation tone in standby mode.  
2) To set the dial mode for pulse dialing, press the # key. Or to set the dial mode for tone  
dialing, press the /tone key. A confirmation tone sounds to indicate the setting is  
complete.  
NOTE: • Make sure your battery pack is fully charged before choosing the dial mode.  
• If you are not sure of your dialing system, set for tone dialing. Make a trial call. If  
the call connects, leave the setting as is. Otherwise set for pulse dialing.  
• If your phone system requires pulse dialing and you need to send DTMF tones  
for certain situations during a call, you may “switch-over” to tone dialing (Refer to  
Tone Dialing Switch-over”).  
Using Your Phone  
Making and Receiving Calls  
Handset On Base  
Handset Off Base  
When the phone rings, remove  
the handset from the base  
(AutoTalk).  
Press the talk, /tone, #, or any  
number key.  
Receive call  
1) Remove the handset from the  
1) Press the talk key.  
base and press the talk key.  
Make call 2) The talk/batt low LED  
2) The talk/batt low LED flashes  
flashes and turns on.  
and turns on.  
3) Listen for the dial tone.  
4) Dial the number.  
3) Listen for the dial tone.  
4) Dial the number.  
Hang up  
Redial  
Press the end key or return the handset to the base (AutoStandby).  
1) Remove the handset from the  
1) Press the talk key.  
base and press the talk key.  
2) Listen for the dial tone.  
2) Listen for the dial tone.  
3) Press the redial/pause key  
3) Press the redial/pause key to dial  
to dial the last dialed number.  
the last dialed number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Terminology  
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the  
terminology explanation.  
Talk Mode - The handset is off the base and the talk key has been pressed, enabling a  
dial tone.  
Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The  
talk key has not been pressed and there is no dial tone.  
Adjusting the Ringer and Earpiece Volume  
Ringer tone  
When the phone is in standby mode, press the v/ /vol key repeatedly to listen to the two  
ringer tone options. The last ringer tone selected/heard will be the phone’s ring tone setting.  
Earpiece volume  
The handset earpiece volume settings (Low, Medium and High) can only be adjusted during  
a call. Press the v/ /vol key repeatedly to scroll between and select the volume level that  
works best for you. When you hang up, the phone keeps the volume setting.  
Temporarily Mute Ringer  
If the handset is off the base, simply press the end key to temporarily mute the incoming  
ring. The ringer will sound with the next incoming call.  
Redial  
The redial/pause key redials the last number dialed.  
The redialed number can be up to 24 digits long.  
Tone Dialing Switch-over  
Some telephone companies use equipment that requires pulse  
dialing (sometimes referred to as rotary dialing). If you need to enter  
tone dialing digits, you can switch-over to tone dialing during the call.  
This feature is useful when you need tone dialing to use automated  
systems, for example, entering your bank account number after you  
have called your bank.  
Initially make your call with the pulse dialing mode. Once your call  
connects, press the /tone key. Enter the desired number. These  
digits will be sent as tone dialing. This special number can be stored  
in a memory location. This is referred to as “Chain Dialing”. Once the  
call ends, the tone mode is canceled and pulse dialing mode  
resumes.  
NOTE: The tone feature only applies when the dial mode is set to pulse.  
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your base unit, noise  
increases. If you pass the range limits of the base unit, your call will terminate within  
5 minutes.  
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually change the phone’s  
channel for clear operation. This function works only when the phone is in use.  
Press the channel key. The talk/batt low LED flashes, indicating the phone is changing to  
another channel. For more information on interference, refer to “Precautions”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Find Handset  
To locate the handset (while it’s off the base), press the find hs key on the base. The handset  
beeps for 60 seconds.  
Paging is canceled when pressing any handset key, the find hs key on the base or the  
handset is returned to the base.  
NOTE: Paging is also canceled when the phone receives an incoming call.  
Flash and Call Waiting  
If you have “Call waiting” service and a call waiting tone sounds  
while you are on a call, press the flash key to accept the waiting call.  
There is a short pause, then you will hear the new caller. To return to  
the original caller, press the flash key again.  
NOTE: You must subscribe through your local telephone company to  
receive Call Waiting Service.  
Storing a Phone Number in Memory  
Your cordless phone has 1 RocketDial memory location and 10  
additional memory locations for storing important telephone numbers.  
You can store your most frequent dialed number in the one-touch  
RocketDial location.  
1) Press the m/mem key in standby mode. The talk/batt low LED  
flashes.  
2) Enter the phone number by using the keypad, /tone or #, up to  
20 digits. If a pause is needed during the dialing sequence, press  
the redial/pause key to insert a pause. Each pause counts as a  
digit and represents a two second delay in time between digits as  
they are sent.  
3) Press the m/mem key again.  
To actually store a number in its designated location;  
4) Press the RocketDial key.  
or  
4) Press memory location (0-9) on the keypad to store a number.  
A tone indicates that the number is stored. If you enter a number in a location that has a  
previously stored number, it will overwrite the existing number without warning.  
NOTE: • The pause key counts as one digit. Pressing the redial/pause key more than  
once increases the length of pause between numbers.  
• In memory storing operation, you must press a key within 30 seconds or the  
handset will beep rapidly and the phone will return to standby mode.  
• Memory location for the RocketDial is independent from the memory locations for  
Memory Dial.  
Dialing a Stored Number  
Using the memory location features  
1) Press the talk key in standby mode, then press the m/mem key.  
2) Enter the memory location (0-9) on the keypad. The stored number automatically dials.  
NOTE: If you select a memory location that does not have a stored number, the handset  
will beep rapidly and the phone will not dial.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
One-touch RocketDial  
Your phone is equipped with “One-touch RocketDial” for instant dialing.  
It is used to dial the phone number stored in the one-touch RocketDial  
location (See “Storing a Phone Number in Memory Dial”).  
To instantly dial the phone number stored in the one-touch RocketDial  
location, simply press the RocketDial key in standby mode. (There is  
no need to press the talk key. The phone will automatically dial). If you  
press the RocketDial key and a phone number is not stored in the  
one-touch RocketDial location, an error tone will sound and the phone  
will not dial.  
Chain Dialing  
The memory locations on the handset are not limited to phone numbers. You can also store  
a group of numbers (up to 20 digits) that you need to enter once your call connects. This is  
referred to as Chain Dialing.  
An example of this is a bank account number. Once you have called your bank, and are  
prompted to enter the account number, simply press the m/mem key and the location number  
where the special number has been stored.  
Store your special number in memory as you would store a phone number (Refer to  
“Storing a Phone Number in Memory Dial”).  
Erasing a Stored Number from Memory  
1) Press the m/mem key twice in standby mode.  
2) Press the RocketDial key or the memory location (0-9). A tone indicates that the stored  
number is erased from memory.  
Changing the Digital Security Code  
The digital security code is an identification code used to connect the handset and the base  
unit. Normally, setting the code is not necessary.  
The first time you charge your handset, the security code is automatically set. In the rare  
situation that you suspect another cordless telephone is using the same security code, you  
can change the code.  
1) Remove the handset from the base unit. Press and hold the find hs key on the base.  
2) While holding the find hs key, place the handset in the base unit. Leave the handset in  
the base for more than 3 seconds. A new random security code is set.  
NOTE: If the handset battery pack is completely discharged or the battery pack is removed,  
the digital security code will be lost. If this happens, a new security code is set  
automatically next time the battery pack is charged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Troubleshooting  
If your cordless telephone is not performing to your expectations, please try these simple  
steps.  
NOTE: Do not attempt to service this unit yourself. Servicing must be performed by  
qualified personnel.  
Symptom  
Suggestion  
The charge/in use LED won’t  
illuminate when the handset  
is placed in the base.  
Make sure the AC adapter is plugged into the base and a wall outlet.  
Make sure the handset is properly seated in the base.  
Make sure that the charging contacts on the handset are clean.  
The audio sounds weak  
and/or scratchy.  
Move the handset and/or base to a different location away from  
metal objects or appliances and try again.  
Press the channel key to help eliminate background noise.  
Can’t make or receive calls.  
Check both ends of the telephone line cord.  
Make sure the AC adapter is plugged into the base and a wall outlet.  
Disconnect the AC adapter for a few minutes, then reconnect it.  
Change the digital security code (see page 7).  
Make sure that the handset is not too far from the base.  
The handset doesn’t ring or  
receive a page.  
The Nickel-Cadmium battery pack may be weak. Charge the  
battery for 15-20 hours.  
The handset may be too far away from the base.  
Place the base away from appliances or metal objects.  
Change the digital security code (see page 7).  
Severe noise interference  
Keep the handset away from microwave ovens, computers, remote  
control toys, wireless microphones, alarm systems, intercoms,  
room monitors, fluorescent lights, and electrical appliances.  
Move to another location or turn off the source of interference.  
If you still have a problem  
Call our customer hotline at 1-800-297-1023.  
Liquid Damage  
Moisture and liquid can damage your cordless phone. In case of accidental submersion,  
please read the following steps.  
Case  
Action  
If the handset or base is exposed to  
moisture or liquid, but the liquid only  
affects the exterior plastic housing.  
Wipe off the liquid, and use as normal.  
Handset:  
If moisture or liquid has entered  
the plastic-housing (i.e. liquid can  
be heard in the phone or liquid  
has entered the handset battery  
compartment or vent openings  
on the base).  
1. Remove the battery cover and leave it off for ventilation.  
2. Remove the battery pack by disconnecting.  
3. Leave the battery cover off and the battery pack disconnected for at  
least 3 days.  
4. Once the handset is completely dry, reconnect the battery pack and  
the battery cover.  
5. Recharge the handset’s battery pack for 20 hours in the base unit  
before using the phone.  
Base:  
1. Disconnect the AC adapter from the base unit, cutting off electrical  
power.  
2. Disconnect the telephone cord from the base unit.  
3. Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while  
recharging the battery pack to avoid charge interruption.  
CAUTION:  
DO NOT use a microwave oven to speed up the drying process. This will  
cause permanent damage to the handset, base and the microwave oven.  
After following these steps, if your cordless telephone does not work,  
please send to:  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd.  
Ft. Worth, TX 76155  
1-800-554-3988. Monday through Friday  
8 a.m. to 5 p.m. CST  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
on it.  
Precautions!  
9. Do not overload wall outlets and extension cords, as this can  
result in the risk of fire or electrical shock.  
Before you read anything else, please observe the following:  
10.Never push objects of any kind into this product through  
cabinet slots, as they may touch dangerous voltage points or  
short out parts that could result in a risk of fire or electric  
shock. Never spill liquid of any kind on the product.  
11.To reduce the risk of electric shock, do not disassemble this  
product. Take it to qualified service personnel when service or  
repair work is required. Opening or removing covers may expose  
you to dangerous voltages or other risks. Incorrect reassembly  
can cause electric shock when the appliance is subsequently  
used.  
12.Unplug this product from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
A. When the power supply cord is damaged or frayed.  
B. If liquid has been spilled into the product.  
C. If the product has been exposed to rain or water.  
D. If the product does not operate normally when following  
the operating instructions. (Adjust only those controls  
that are covered by the operating instructions. Improper  
adjustment of other controls may result in damage and  
will often require extensive repair work by a qualified  
technician.)  
Warning!  
Uniden America Corporation DOES NOT represent this unit to be  
waterproof. To reduce the risk of fire, electrical shock, or damage  
to the unit, DO NOT expose this unit to rain or moisture.  
Rechargeable Nickel-Cadmium Battery  
Warning  
This equipment contains a rechargeable nickel-cadmium battery.  
Cadmium is a chemical known to the State of California to  
cause cancer.  
The rechargeable nickel-cadmium battery contained in this  
equipment may explode if disposed of in a fire.  
Do not short-circuit the battery.  
Do not charge the rechargeable nickel-cadmium battery used in  
this equipment in any charger other than the one designed to  
charge this battery as specified in the owner’s manual. Using  
another charger may damage the battery or cause the battery to  
explode.  
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
E. If the product has been dropped or the cabinet has  
been damaged.  
F. If the product exhibits a distinct change in  
performance.  
Uniden voluntarily participates in an  
RBRC® industry program to collect and recycle nickel-cadmium  
batteries at the end of their useful life, when taken out of  
service within the United States. The RBRC® program provides a  
convenient alternative to placing used nickel-cadmium batteries  
into the trash or municipal waste stream, which is illegal in  
some areas.  
13.Do not use the telephone to report a gas leak in the vicinity of  
the leak.  
Additional Battery Safety Precautions  
Caution!  
To reduce the risk of fire or injury to persons by the  
battery, read and follow these instructions:  
Through the RBRC® program, Uniden makes it easy for you to  
drop off the used battery at local retailers of replacement  
nickel-cadmium batteries. You may also contact your local  
recycling center for information on where to return the used  
battery. Please call 1-800-8-BATTERY for information on Ni-Cd  
battery recycling in your area. Uniden's involvement in this  
program is part of its commitment to protecting our  
environment and conserving natural resources.  
1. Use only the Uniden battery pack specified in the owner’s  
manual.  
2. Do not dispose of the battery pack in a fire. The cell may  
explode. Check the nickel-cadmium battery disposal package  
insert for disposal instructions.  
3. Do not open or mutilate the battery pack. Released electrolyte  
is corrosive and may cause damage to the eyes or skin. It may  
be toxic if swallowed.  
4. Exercise care in handling the battery in order not to short the  
battery with conducting materials such as rings, bracelets, and  
keys. The battery or conductor may overheat and cause burns.  
5. Charge the battery pack provided with or identified for use with  
this product only in accordance with the instructions and  
limitations specified in the owner’s manual provided for this  
product.  
RBRC® is a registered trademark of the Rechargeable Battery  
Recycling Corporation.  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
6. Observe proper polarity orientation between the battery pack  
and battery charger.  
Uniden works to reduce lead content in our PVC coated cords in  
our products and accessories.  
WARNING: The cords on this products and/or accessories  
contain lead, a chemical known to the State of California to cause  
birth defects or other reproductive harm. Wash hands after  
handling.  
SAVE THESE INSTRUCTIONS!  
Important Electrical Considerations  
Unplug all electrical appliances when you know an electrical storm  
is approaching. Lightning can pass through your household wiring  
and damage any device connected to it. This phone is no  
exception.  
Important Safety Instructions  
When using your telephone equipment, these basic safety  
precautions should always be followed to reduce the risk of fire,  
electrical shock, and injury to persons:  
The FCC Wants You To Know  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as  
detailed by the owner’s manual, could void your authority to  
operate this product. Your telephone compiles with Part 68 of FCC  
Rules. You must, upon request, provide the FCC registration number  
and the REN to your telephone company. Both numbers are on the  
base unit.  
1. Read and understand all instructions.  
2. Follow all warnings and instructions marked on the product.  
3. Unplug this product from the wall outlet before cleaning. Use a  
dry cloth for cleaning without liquid or aerosol cleaners.  
4. Do not use this product near water; for example, near a  
bathtub, wash bowl, kitchen sink or laundry tub, in a wet  
basement, or near a swimming pool.  
5. Do not place this product on an unstable cart, stand, or table.  
The telephone may fall, causing serious damage to the unit.  
6. Slots and openings in the cabinet and the back or bottom are  
provided for ventilation. To protect the product from  
overheating, these openings must not be blocked or covered.  
This product should never be placed near or over a radiator or  
heat register. This product should not be placed in a built-in  
installation unless proper ventilation is provided.  
7. This product should be operated only from the type of power  
source indicated on the marking label. If you are not sure of  
the type of power supply to your home, consult your dealer or  
local power company.  
NOTE:  
You must not connect your phone to:  
• coin-operated systems  
• most electronic key telephone systems  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) This device may not  
cause harmful, interference, and (2) This device must accept any  
interference received, including interference that may cause  
undesired operation. Privacy of communications may not be  
ensured when using this phone.  
Range  
Your new phone is designed to achieve the maximum possible  
range by transmitting and receiving according to the highest  
specifications set forth by the FCC. We have rated this phone to  
8. Do not allow anything to rest on the power cord. Do not locate  
this product where the cord will be damaged by persons walking  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
operate at a maximum distance with the qualification that the  
range depends upon the environment in which the telephone is  
used. Many factors limit range, and it would be impossible to  
include all the variables in our rating. The Maximum Range rating  
of this phone is meant to be used as a means of comparison  
against other range claims.  
about the proper adapter or converter for your particular situation.  
Connecting the Telephone Cords  
Consider these safety guidelines before connecting the telephone  
cords:  
Caution!  
Never install telephone wiring during a lightning storm.  
Never touch uninsulated telephone wires or terminals unless the  
telephone line has been disconnected.  
Telephone Line Problems  
The FCC has granted the telephone company the right to  
disconnect service in the event that your phone causes problems  
on the telephone line. Also, the telephone company may make  
changes in facilities and services which may affect the operation of  
your unit. However, your telephone company must give adequate  
notice in writing prior to such actions to allow you time for making  
necessary arrangements to continue uninterrupted service.  
If you are having trouble with your telephone service, you must  
first disconnect your phone to determine if it is the cause of your  
problem. If you determine that it is the cause, you must leave it  
disconnected until the trouble has been corrected.  
Use caution when installing or modifying telephone lines.  
Applying Power to the Base  
This phone requires an AC outlet, without a switch to interrupt  
power, and the included AC adapter. To relieve strain on the DC  
plug when the phone is placed on a desk or table, wrap the power  
cord around the strain relief notch on the back of the base.  
NOTE:  
Place the power cord so that it does not create a  
trip hazard, or where it could become chafed and  
create a fire or other electrical hazards.  
Radio Interference  
Radio interference may occasionally cause buzzing and humming in  
your cordless handset, or clicking noises in the base. This  
interference is caused by external sources such as TV, refrigerator,  
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit  
is NOT DEFECTIVE. If these noises continue and are too distracting,  
please check around your home to see what appliances may be  
causing the problem. In addition, we recommend that the base not  
be plugged into a circuit that also powers a major appliance  
because of the potential for interference. Be certain that the  
antenna on the unit is fully extended when needed.  
I.C. Notice  
TERMINAL EQUIPMENT  
Notice: This equipment meets the applicable Industry Canada  
Terminal Equipment Technical Specifications. This is confirmed by  
the registration number. The abbreviation, IC, before the  
registration number signifies that registration was performed based  
on a Declaration of Conformity indicating that Industry Canada  
technical specifications were met. It does not imply that Industry  
Canada approved the equipment.  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving  
radio signals from another cordless telephone or other source of  
interference. If you cannot eliminate this type of interference, you  
need to change to a different channel.  
Finally, it should be noted that some cordless telephones operate  
at frequencies that may cause interference to nearby TVs and VCRs.  
To minimize or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a TV or VCR. If  
interference is experienced, moving the cordless telephone farther  
away from the TV or VCR will often reduce or eliminate the  
interference.  
Notice: The Ringer Equivalence Number (REN) for this terminal  
equipment is marked on the equipment itself. The REN assigned to  
each terminal equipment provides an indication of the maximum  
number of terminals allowed to be connected to a telephone  
interface. The termination on an interface may consist of any  
combination of devices subject only to the requirement that the  
sum of the Ringer Equivalence Numbers of all the devices does not  
exceed five.  
RADIO EQUIPMENT  
The term “IC:” before the radio certification number only signifies  
that Industry Canada technical specifications were met.  
More Than One Cordless Telephone  
If you want to use more than one cordless telephone in your home,  
they must operate on different channels. Press the channel key to  
select a channel that provides the clearest communication.  
Operation is subject to the following two conditions: (1) this  
device may not cause interference, and (2) this device must accept  
any interference, including interference that may cause undesired  
operation of the device. “Privacy of communications may not be  
ensured when using this telephone.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications between the  
handset and base of your cordless telephone are accomplished by  
means of radio waves which are broadcast over the open airways.  
Because of the inherent physical properties of radio waves, your  
communications can be received by radio receiving devices other  
than your own cordless telephone unit. Consequently, any  
communications using your cordless telephone may not be private.  
Installation Considerations  
Selecting a Location  
Before choosing a location for your new phone, there are some  
important guidelines you should consider:  
The location should be close to both a phone jack and  
continuous power outlet. (A continuous power outlet is an AC  
outlet which does not have a switch to interrupt its power.)  
Keep the base and handset away from sources of electrical  
noise such as motors or fluorescent lighting.  
The base can be placed on a desk or tabletop.  
You should charge your new phone for 15-20 hours before  
completing the installation or using the handset.  
Telephone Line Outlets  
TMhoerdeualreartwJoatcykpes of phone outlets:  
Most phone equipment available now uses modular jacks. Phone  
cords are fitted with a molded plastic connector which plugs into  
this type of jack. If you do not have modular phone jacks, contact  
your local telephone company for information about their  
installation.  
Hardwired Jack  
Some equipment is wired directly to a phone jack, and these types  
of installations require a modular jack converter. This type of  
installation is not difficult; however, you should contact your  
Uniden telephone dealer or a telephone supply store for advice  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  

Tascam MP3 Player HS 4000 User Manual
Texas Instruments Computer Monitor SWRU157D User Manual
Transition Networks Cable Box DVP 5140K User Manual
Universal Remote Control Universal Remote omega MX 650 User Manual
VDO Dayton Automobile Accessories MM 2100 User Manual
Vertical Communications Conference Phone GCA70 248 User Manual
ViewSonic Projector PLED W500 User Manual
Vizio Car Satellite TV System E400 B2 E480 B2 User Manual
VTech Cordless Telephone CS6219 User Manual
Weed Eater Lawn Mower HD13538 User Manual