Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Welcome / Features / Terminology
Controls and Functions
Intercom/page Feature
29
30
30
31
31
31
3
Call Transfer Feature
Chain Dialing
Getting Started
Checking the package contents
Setting up the phone
Mute (handset/base)
Selecting a different channel
Tone Dialing Switch-over
5
6
Caller ID Options
Setting caller ID options
Ringer volume setup
Handset ringer tone setting
Distinctive ringer setup
Selecting a language
Caller ID Features
12
14
14
15
16
Caller ID
32
32
33
When the telephone rings
Viewing the Caller ID Message list
Deleting information from the Caller ID list 34
Using the Caller ID list
35
37
38
Using “Caller ID on call waiting” service
Call waiting deluxe features
Basics
Making and receiving calls
Redialing a call
17
19
20
Additional Information
Changing the digital security code
Changing the face plate
Headset installation
Installing the beltclip
Maintenance
Note on power sources
Troubleshooting
General information
Precautions & Warranty
Index
Traveling out-of-range
39
40
40
41
41
42
43
44
45
47
Memory Dialing
Storing phone numbers, names and
distinctive ring
Making calls with memory dialing
Editing or erasing a stored name,
phone number or distinctive ring
21
23
25
Telephone Features
3-way conferencing
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Uniden EXI3965 cordless telephone.
This phone is designed and engineered to exacting standards for reliability, long life
and outstanding performance.
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
Welcome
Features
• 900 MHz Extended Range
• 2-way lntercom
• Flash and Pause
• Tone/Pulse Dialing
• 10 Day Standby Battery Life
• 6 Hour Talk Time
• Caller ID and Call Waiting Caller ID
• 70 Number Caller ID Memory
• 40 Number Memory Dialing (30 Handset & • Handset Earpiece and Ringer Volume Control
10 Base)
• Speakerphone
• Distinctive Ring, options
• 32 Digit Redial
• Trilingual Language, option
AutoTalkTM allows you to answer a call by just removing the handset from the base.
AutoStandbyTM allows you to hang up by simply returning the handset to the base.
Random CodeTM protects you against misbilled calls, which might result from your phone being
activated by other equipment. Random Code digital security automatically selects one of approx.
65,000 digital security codes for the handset and base. Also, AutoSecureTM electronically locks
your phone when the handset is in the base.
Terminology
Digital Spread Spectrum Technology utilizes a “wider frequency band” vs. a “single narrow
band” used in standard digital transmissions. The result is a more secure conversation with the
clarity of digital sound, extended range, and minimal interference from other cordless phones.
talk
Standby Mode - The handset is not in use, is off of the base, and
dial tone is not present and the display is blank.
has not been pressed. A
talk
Talk Mode - The handset is not on the base and
Talkappears on the display.
has been pressed enabling a dial tone.
®
Uniden is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of Uniden America Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
1.Handset Antenna
2.Headset Jack Cover
3.Handset Battery Compartment
4.Handset Earpiece
5.LCD Display
1
6.Volume Up Key
7.Redial Key
4
2
8.Volume Down Key
9.Talk Key
10. /Tone Key
11.Mute/Pause Key
12.Menu Key
13.Caller ID Key
5
6
7
8
9
redial
caller id
13
14
talk
flash
int'cm
select
abc
def
1
4
2
5
8
3
6
15
ghi
jkl
mno
14.Flash Key
pqrs
7
tuv
wxyz
9
3
tone
oper
0
#
15.Intercom/Select Key
16.Delete/Channel Key
17.Memory Key
18.Handset Microphone
19.Handset Charging Contacts
10
11
12
16
17
18
mute
pause
menu
memory
delete
channel
19
CONTROLS AND FUNCTIONS [ 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
20.Base Speaker
21.Ringer Key
22.Redial/Pause Key
23.Base Charging Contacts
24.Ringer Off LED
25.Status LED
24
25
ringer off
status
20
26
ringer
redial/p memory flash
21
22
27
28
26.
(Talk Key)
abc
jkl
def
1
2
5
8
3
6
27.Flash Key
28.Memory Key
29.Base Antenna
30. /Tone Key
31.Mute Key
32.Base Speaker Volume Keys
33.Intercom/Page Key
34.Base Microphone
35.DC Power Input
36.Phone Jack
ghi
mno
4
29
30
pqrs
tuv
wxyz
7
9
#
tone
oper
0
23
int'cm/page
volume
mute
31
32
mic
33
34
35
36
[ 4 ]
CONTROLS AND FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Package Contents
Make sure you have received the following items in the package.
If any of these items are missing or damaged, contact the Uniden Parts
Department (see below).
ring
er
o
ff
sta
tus
rin
ge
r
red
ial/
p
me
mo
ry
fla
sh
1
2
abc
r
id
3
def
calle
4
ghi
l
redia
5
jkl
6
mno
pq
rs
7
8
tuv
mu
flash
t
se
lec
int'cm
9
wxyz
talk
n
f
de
0
oper
3
6
int'c
abc
jkl
m/p
age
2
#
1
volu
me
no
m
mic
5
ghi
4
te
z
xy
w
9
v
tu
8
rs
pq
7
#
er
op
n
to
e
0
e
let
nel
an
de
ch
ry
mo
me
nu
me
te
mu
e
us
pa
• Base unit
• Handset
• AC adapter
• Rechargeable
battery pack
• This Owner’s Manual
• Quick Reference Guide
• Other Printed Material
flash
ory
mem
l/p
redia
er
ring
tone
e
volum
/page
int'cm
mic
• Telephone line cord
• Beltclip
• Face plate
Uniden Parts Department
(800) 554-3988
Hours: M-F 7:00 AM to 5:00 PM CST.
GETTING STARTED [ 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Phone
Do the following steps:
A. Choose the best location
B. Install the battery pack
C. Connect the base unit
D. Choose the dialing mode
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in
the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important
guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid television sets and
other electronic equipment
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration, or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet that is
not switchable.
• Keep the base and handset away from sources of electrical noise such as motors, microwave
ovens, and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The base can be placed on a flat surface such as desk, tabletop, or mounted on a standard
wall plate.
[ 6 ]
GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Install the battery pack
note
Place the handset on the base unit and charge the battery pack for at
least 15-20 hours before plugging the phone line into your phone.
• Use only the Uniden
Battery supplied with
your phone.
Replacement batteries
are also available
through the Uniden
Parts Department
(See page 44) or
• Even when the battery
pack is not being used,
it will gradually
Battery use time (per charge)
From fully charged:
• 6 hours continuous use.
• 10 days when the handset is in the standby mode.
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base
unit after each
Low battery alert
If the phone is not in use, “Low Battery” appears on
the LCD and none of the keys will operate. If the phone
is in use, “Low Battery” flashes and the handset
beeps. Complete your conversation as quickly as
possible and return the handset to the base unit
for charging.
telephone call.
• If you must replace the
battery pack during a
telephone call,
complete the
replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
GETTING STARTED [ 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Connect the base unit
!
1 Connect the AC adapter to the DC IN
9V jack and a standard 120V AC
wall outlet.
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed and
create a fire or
2 Set the base on a desk or tabletop,
Pull back stand out for base support
and place the handset on the base
unit as shown.
electrical hazard.
3 Raise the antenna to a vertical position.
note
4 Make sure the status LED lights. If the LED does not
light, check to see that the AC adapter is plugged in.
The handset can be
placed face up or face
down in the base
for charging.
re
di
al
ca
lle
r
i
d
ta
5
lk
rin
int'cm
se
fla
sta
tus
s
h
1
lec
t
2
abc
def
3
4
ghi
jkl
mn
6
o
7pqrs
8
tuv
rin
ge
r
9
wxyz
re
dia
tone
l/p
me
m
0
oper
fl
sh
#
1
m
us
ut
e
pa
m
e
ab
c
e
nu
2
m
em
or
y
de
an
3
de
f
let
ne
e
l
ch
4
gh
i
5
jkl
m
6
no
• Use only the supplied AC adapter. Do not use any other AC adapter.
pq
rs
7
tu
8
v
wx
yz
9
note
n
op
e
r
0
int
'cm
/pa
ge
#
vo
lum
e
• Connect the AC adapter to a continuous power supply.
mi
c
m
tip
5 Connect the telephone line cord to the TEL LINE jack
and a telephone outlet once the handset is
fully charged.
If your telephone outlet
isn’t modular, contact
your telephone company
for assistance.
Modular
[ 8 ]
GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Choose the dialing mode
Most phone systems use tone dialing, which sends DTMF tones through the
phone lines. However, some phone systems still use pulse dialing such as in
rural areas. The default setting is tone dialing. Depending on your dialing
system, set the mode as follows:
Base Setting only
note
flash
1 Press and hold
until you hear a confirmation tone.
Make sure your battery
pack is fully charged
before choosing the
dial mode.
#
2 To set the dial mode for pulse dialing, press
. Or to set the dial
mode for tone dialing, press
. A confirmation tone sounds to
indicate the setting is complete.
• If you are not sure of your dialing system, set for tone dialing. Make a
trial call. If the call connects, leave the setting as is, otherwise set for
pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF
tones for certain situations during a call, you may “switch-over” to tone
dialing (refer to “Tone Dialing Switch-over” on page 31).
GETTING STARTED [ 9 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Base Unit on a Wall
Setting the handset retainer clip for wall mounting
!
1 On the base unit, pull the handset retainer clip out of
the slot and rotate it clockwise 180 degrees.
DO NOT use an outlet
controlled by a
wall switch.
Flip the hook tab over
so the tab holds the
handset.
2 Flip the retainer clip from front to back. Slide it back
into the slot so that the lip of the retainer is up and
the ª is down. The retainer holds the handset
in place.
Standard wall plate mounting
This phone can be mounted on any standard
Single-Line
Telephone Jack
(RJ11C)
Raise the
wall plate.
antenna.
1 Route the AC adapter cord inside the molded
Telephone
Line Cord
wiring channel as shown.
2 Plug the telephone line cord into the TEL
LINE jack. Route the cord inside the molded
wiring channel as shown.
Power Outlet
(AC 120V, 60Hz)
3 Raise the antenna to a vertical position.
AC Adapter
4 Align the mounting slots on the base with the mounting posts on the
wall. Then push in and down until the phone is firmly seated.
[ 10 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly
to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid
excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the
base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1 Insert two mounting screws into the wall, (with their
appropriate anchoring device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wall and screw
heads for mounting the phone.
2 Set the retainer clip if necessary.
3 Refer to steps 1 through 4 on page 10 to mount
the telephone.
GETTING STARTED [ 11 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Caller ID Options
note
There are three Caller ID setup options available;
Auto Talk
CIDCW
Area Code
You must subscribe to
Caller ID on Call Waiting
in order to use
TM
AutoTalk allows you to answer the phone without
talk
pressing the
button. If the phone rings when AutoTalk is on, simply
this feature.
remove the handset from the base and the phone automatically answers
the call. Or if the handset is not on the base, press any key to answer the
call. If the phone rings when AutoTalk is off, you must press
answer the call.
to
talk
talk
1
flash
int'cm
select
Caller ID on Call Waiting (CIDCW) performs the same
as regular Caller ID on a call waiting number. Call
waiting options allow you to handle call waiting calls in
seven different ways. (See page 38.)
abc
def
2
5
8
3
ghi
jkl
mno
4
6
pqrs
7
tuv
wxyz
9
tone
oper
0
#
You must subscribe to Call Waiting Deluxe from your
phone company in order to use this feature.
mute
pause
menu
memory
delete
channel
To change your Caller ID options:
Memory Edit
Ringer Volume
Ringer Tones
menu
1 Press
. The following screen appears.
2 Press ª to move the pointer to “Caller ID
Distinct.Ring
Caller ID Setup
Language
int’cm/select
Setup”. Then press
.
•
3 Use
or ª to move the pointer to the selection
Auto Talk
CIDCW
Area Code
int’cm/select
that you would like to change, then press
.
[ 12 ] CALLER ID OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
•
4 Use
and ª to move the pointer between “Auto Talk On” or
“Auto Talk Off”. For “CIDCW”, choose “CIDCW On” ,“CW Options”
or “CIDCW Off” depending upon the type of service to which
you subscribe.
int’cm/select
Press
to make your selections and a confirmation tone
will sound. To complete the setting, make sure to return the handset to
the base.
Entering Your Area Code
If you enter a 3-digit area code number in the “Area Code” option, your
local area code does not appear in Caller ID messages. For calls received
from outside your local area code, you will see a full 10-digit number.
note
• If your calling area
requires 10-digit
dialing, do not program
this option.
menu
1 When the phone is in the standby mode, press
.
• When the area code has
already been stored in
memory, the stored area
code will be displayed.
To change it, use the
ª
2 Press
to move the pointer to “Caller ID Setup”.
int’cm/select
Then press
to select. The Caller ID setting screens appears.
ª
3 Use
to move the pointer to the “Area Code”, then press
delete/channel
int’cm/select
and
.
number keypad to enter
the new area code.
4 Use the number keypad (0 to 9) to enter 3-digit
Area Code
area code.
• To complete the setting,
press
int’cm/select
then return the handset
to the base unit.
int’cm/select
5 Press
,and a confirmation tone will sound.
CALLER ID OPTIONS [ 13 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Ringer Volume Setup
note
Handset ringer volume setting
When you select
“Ringer Off” ,
<Ringer Off> appears
on the handset display.
menu
1 When the phone is in the standby mode, press
.
ª
2 Press
to move the pointer to “Ringer Volume”
to select.
Then press
int’cm/select
•
3 Press
or
ª
to move the pointer through the
Ringer High
Ringer Low
Ringer Off
ring settings.
int’cm/select
4 Press
to complete the ringer volume setting and you will
hear the confirmation tone. Then the handset returns to the menu
screen.
Base ringer volume setting
ringer
1 When the phone is in standby mode, press
.
ringer
2 By pressing
multiple times, the ringer options (high, low, off)
will sound.
If “Ringer Off” is selected the ringer off LED will light.
Handset Ringer Tone Setting
menu
1 When the phone is in the standby mode, press
.
2 Press
ª
to move the pointer to “Ringer Tones”.
[ 14 ] CALLER ID OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
int’cm/select
Then press
.
You can choose from 8 ringers or 10 melodies:
• Ringer [A - H]
• Melodies [Home Sweet Home, Sweetheart, Aura Lee,
Beethovens #9, When Irish Eyes, Merry Christmas,
Old MacDonald, Twinkle Twinkle, For Elise, Aloha Oe]
Ringer A
Ringer B
Ringer C
•
ª
3 Press
or
to move the pointer and you will hear the ringer or
the melody as you scroll through the options.
int’cm/select
4 Press
and you will hear a confirmation tone.
Distinctive Ringer Setup
note
If you have set multiple memory locations with distinctive rings,
switching the setting to “Distinctive Off” will result in no distinctive
ringing. All incoming calls will have a normal ring tone. Switching to
“Distinctive On” will activate all programmed distinctive ring
memory locations.
See MEMORY DIALING for
more details regarding the
Distictive Ring setup on
page 22.
menu
1 Press
. Then press
ª
to move the pointer to
“Distinct. Ring”.
int’cm/select
2 Press
to select “Distinct.Ring”.
•
3 Use
or
ª
to select “Distinctive On” or
Distinctive On
Distinctive Off
“Distinctive Off”.
int’cm/select
4 Press
and a confirmation tone will sound.
CALLER ID OPTIONS [ 15 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Language
menu
1 When the phone is in the standby mode, press
.
ª
2 Press
to move the pointer to “Language".
int’cm/select
English
French
Spanish
Then press
to select. The Language setting
screen appears.
•
ª
3 Use
or
to move the pointer to the desired selection.
int’cm/select
Then press
to complete setting and a confirmation tone
will sound.
[ 16 ] CALLER ID OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Receiving Calls
note
• The base microphone
is located under the
phone. Position yourself
as near to the base as
possible and
From the Handset
From the Base
Handset On the Base
Pick up the Handset (Auto Talk
Press
(talk).
To answer
speak clearly.
talk
on) or press
.
a call
Handset Off the Base
delete/channel
• Press
if
talk
Press
.
you enter a wrong
number. To delete all
the numbers that you
have entered, press and
talk
1) Press
.
1) Press
2) Listen for the dial tone.
3) Dial the number.
(talk).
delete/channel
hold
2) Listen for the dial tone.
3) Dial the number.
until the display clears.
To make
a call
OR
1) Dial the number.
talk
• You must press a key
within 20 seconds or
the phone will return
to standby.
2) Press
.
talk
Press
, or return the handset Press
(talk).
To hang
up
to the base (Auto Standby).
BASICS [ 17 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting
Note: You must subscribe to Call Waiting service to use this feature.
When a call is received during a telephone call already in progress,
flash
press
to switch to the new call. If you also subscribe to Call Waiting
on Caller ID, you will see the name and number of the caller in call
waiting. (See page 37.)
Adjusting Earpiece Volume
•
Pressing
or
ª
during a call will change the earpiece volume. This
setting will remain in effect after the telephone call has ended.
Volume
Maximum
Volume
High
Volume
Medium
Volume
Low
ª
•
ª
•
ª
•
Base Volume
•
Pressing
or
ª
during a call will change the volume of the base.
[ 18 ] BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing a Call
note
The last three phone numbers dialed can be quickly redialed.
• If the number exceeds
32 digits, only the first
32 digits are retained
for redial.
Redialing from Standby Mode
redial
1 Press
. The phone number that was
Most
recent
8002971023
last dialed appears on the display.
redial
redial
2 Press
again. Each press of
will
• Press and hold
delete/channel
to delete
display one of the last three numbers dialed.
the displayed
redial number.
talk
3 Press
. “Talk” appears on the display,
then the volume setting is displayed.
4 Then the selected number is dialed. After
about 5 seconds, the call-time display appears.
talk
5 To hang up, press
or return the handset
to the base. The call-time will be displayed
for about 5 seconds.
Redial from Talk Mode
• Only the last number
dialed can be accessed
talk
talk
1 Press
. “Talk” and the volume setting appear
Talk 0:17
18002971023
after
has
on the display.
been pressed.
redial
2 Press
. The last number dialed will be displayed and redialed.
talk
3 To hang up, press
or return the handset to the base. The call-time
will be displayed for about 5 seconds.
BASICS [ 19 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Base
1 To call the last number dialed from the base,
press
(talk key).
ringer off
status
redial/p
2 Press
. The last number dialed from the
base is redialed.
3 To hang up, press
(talk key).
ringer
redial/p memory flash
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base
unit, noise increases. If you pass the range limits of the base unit, your
call will terminate within 30 seconds.
[ 20 ] BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Phone Numbers, Names and Distinctive Rings
note
Memory Dialing allows you to dial a number using just a few key strokes.
Your EXI3965 stores up to 30 names/numbers in the handset plus 10
numbers in the base.
• In memory dialing
operation, you must
press a key within 20
seconds or the phone
will return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
With the handset
menu
Memory Edit
Ringer Volume
Ringer Tones
1 Press
. The following
screen appears.
int’cm/select
2 Press
to select
Memory Edit
01
02
delete/channel
“Memory Edit”.
• Press
to delete incorrect
character, then enter
the correct character.
To delete all characters
press and hold
•
3 Press
,
ª
to move pointer to
memory location of your choice.
or
redial
caller id
delete/channel
Press number keypad (0-3) for
tens’ digit and press number
keypad (0-9) for ones’ digit to
select memory location. Press
.
talk
flash
int'cm
select
abc
def
1
4
2
5
8
3
6
ghi
jkl
mno
int’cm/select
to select location.
pqrs
7
tuv
wxyz
9
tone
oper
0
#
4 “Store Name” appears on the
display. Then use the number
keypad to enter the name. Press
Store name
mute
pause
menu
memory
delete
channel
redial
caller id
and
to move
back/forth between characters.
MEMORY DIALING [ 21 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
int’cm/select
5 Press
to store the name. Then “Store
Store number
note
Number” appears on the display.
• The pause feature is
useful for long distance
calling, credit card
dialing, or sequences
that require a pause
between digits.
6 Press the number key pad to enter the phone number.
int’cm/select
Then press
to store the numbers.
•
7 “Distinctive Ring” appears. Then press
to move the pointer to one of the Distinctive
Ring options.
or
Distinctive Ring
No Selection
Ringer A
ª
• “Distinctive Ring”
allows user to preset
memory locations with
a designated ring tone.
When an incoming call
is received and the
Caller ID information
matches one of the 30
memory locations, the
Distinctive Ring that
has been stored for
that particular caller
will sound.
int’cm/select
8 Press
to complete setting. You will hear
the confirmation tone.
If you choose not to store a “Distinctive Ring”
for each memory location, simply select the
“No Selection” option.
Memory04 stored
Number of times key is pressed
keys
1
1
2
3
4
5
6
7
8
9
1
A
D
G
J
M
P
T
W
*
2abc
3def
4ghi
5jkl
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
4
5
6mno
7pqrs
8tuv
9wxyz
0
6
r
s
7
9
8
y
z
0
(blank)
[ 22 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
With the Base
note
1 Press
. (Status LED blinks.)
• The 10 memory
locations in the base
are independent
locations from
2 Dial the number you wish to store. (The phone
number cannot exceed 20 digits.)
ringer
redial/p memory flash
the handset.
3 Press
. Enter the memory location number
abc
def
1
2
3
(0-9) on the keypad. The status LED is no longer
illuminated. A confirmation tone sounds and the
number is stored.
• The 10 memory
locations are
represented by the
numbers 0-9 on the
keypad. If you store
a number in one of
these locations, then
attempt to store a
different number in
the same location
later, the new
Making Calls with Memory Dialing
Memory dialing from Standby Mode
With the handset
1 Press
redial
caller id
number will
. The handset displays
01 UNIDEN CORP
02 JOHN DOE
03 MOM AND DAD
overwrite the
talk
flash
int'cm
select
your programmed memory locations.
previous one.
abc
def
1
4
2
5
8
3
6
•
2 Press
and ª or enter a two-digit
number (01 - 30) to select the
memory location you would like
to dial.
ghi
jkl
mno
Talk
8175551212
pqrs
7
tuv
wxyz
9
tone
oper
0
#
mute
pause
menu
memory
delete
channel
talk
3 Press
. “Talk” and the volume setting appear on
the display. Then the displayed number is dialed.
MEMORY DIALING [ 23 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Display a Programmed Number while in Memory Location List
caller id
Press
Press
to review the details of a memory location.
to return to program name list.
redial
Detail info.
Program name list
caller id
01 UNIDEN CORP
02 JOHN DOE
03 MOM AND DAD
03 MOM AND DAD
817-555-1212
Ringer D
Memory dialing from Talk Mode
note
talk
1 Press
. “Talk” and the
Talk
Talk
Volume Medium
volume setting appear.
Whenever you are
using a menu screen,
you must press a key
within 20 seconds or
the phone will return
to standby.
2 Press
.
Talk
0:00
3 Enter a two-digit number (01 - 30) to select the
memory location of the desired phone number.
The selected phone number is displayed. Then the
number is dialed.
Talk 0:35
8175551212
With the Base
ringer off
status
(talk key)
1 Press
.
2 Press
. Enter the memory location number
(0-9) to dial the number.
ringer
redial/p memory flash
[ 24 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing or Erasing a Stored Name, Phone Number or
Distinctive Ring
menu
1 Press
. The following screen appears.
Memory Edit
Ringer Volume
Ringer Tones
int’cm/select
2 Press
to select
“Memory Edit”.
•
3 Press
,
ª
to scroll through
Memory Edit
01 Uniden CORP
02 JOHN DOE
memory locations.
or
Press number keypad (0-3) for tens’ digit and press
number keypad (0-9) for ones’ digit to select memory
int’cm/select
redial
caller id
talk
flash
location. Then press
be edited.
to select location to
int'cm
select
abc
def
1
4
2
5
8
3
6
ghi
jkl
mno
•
4 Press
ª
or
to select the
Edit Memory01
Delete Memory01
Go Back
pqrs
7
tuv
wxyz
9
note
desired function and press
tone
oper
0
#
int’cm/select .
To edit the stored
To delete all characters
press and hold
data, select “Edit.” To delete the
data, select “Delete.” To return
to the previous screen, select
“Go Back.”
mute
pause
menu
memory
delete
channel
delete/channel
.
To edit data, go to step a. To delete data, go to step b.
(See page 26.)
MEMORY DIALING [ 25 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
a. Editing a stored Name, Phone Number or Distinctive Ring
delete/channel
redial
(1) Use the number keypad,
,
and
Memory01 Stored
caller id
•
to edit the name and numbers. Use
to scroll through distinctive ring list if you
,
ª
want to make a change.
int’cm/select
(2) Press
when all editing is complete and a confirmation
tone sounds.
b. Deleting the Stored Data
•
(1) Press
to move the pointer to “Yes”.
Delete Memory01?
Yes
No
int’cm/select
delete/channel
(2) Press
or
.
There is a confirmation tone and the entry is
deleted. The following screen appears.
Memory01 Deleted
(3) After a few seconds the display returns to the
“Memory Edit” screen.
Memory Edit
01
02 JOHN DOE
You may select another number to edit or press
to return to standby.
menu
[ 26 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
With the Base
note
ringer off
status
1 Press
. (Status LED blinks.)
again.
To edit the numbers that
you have stored in the
base, simply overwrite the
existing number. Refer to
“Storing Phone Numbers
and Names with the Base”
on page 23.
2 Press
3 Enter the memory location number (0-9) of the
number you wish to delete. The status LED is no
longer illuminated. A confirmation tone indicates
the number has been erased.
ringer
redial/p memory flash
abc
def
1
2
3
MEMORY DIALING [ 27 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3-way Conferencing
note
The Uniden EXI3965 permits 3-way conversations between
the handset, base and outside line.
• Pressing the
on the
base while dialing with
the handset will set the
3-way conversation
mode. Dialing is
When speaking on the handset
to
not affected.
mu
te
1 Press
on the base unit
• During a 3-way
conversation, you can
only dial from
to initiate the 3-way conversation.
ringer off
status
2 To hang up, press
on
the handset.
the base. The handset will still
be connected to the call.
ringer
redial/p memory flash
When speaking on the base
talk
1 Press
on the handset to initiate the
redial
caller id
3-way conversation.
talk
flash
int'cm
select
2 To hang up, return the handset to the
abc
def
1
2
3
talk
base, or press
on the handset.
The base will still be connected to
the call.
[ 28 ] TELEPHONE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom/page Feature
note
Intercom from the base to handset
If the page is not answered
within one minute, the
paging sounds stops
automatically.
int’cm/page
1 Press
on the base. The handset beeps. (If no answer, press
int’cm/page
again to cancel.)
2 Press any key on the handset to answer. “Intercom” appears on the
display.
talk
3 To turn off the intercom, press
on the handset or
on the base.
Intercom from the handset to base
int’cm/select
int’cm/select
1 Press
on the handset. (If no answer, press
again
to cancel.)
int’cm/page
2 At the base, press
or
to answer. Speak into the base
microphone.
talk
3 To turn off the intercom, press
on the handset or
on the base.
TELEPHONE FEATURES [ 29 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Transfer Feature
To Transfer from the Handset to the Base
int’cm/select
1 Press
on the handset. The caller is put on hold and the
intercom tone sounds on the base.
int’cm/page
2 Press
or
on the base. The intercom mode is activated,
but the caller is still on hold.
talk
3 To transfer the call to the base, press
on the handset. To cancel
the transfer, press
on the base.
To Transfer from the Base to the Handset
int’cm/page
1 Press
on the base. The caller is put on hold and the
intercom tone sounds on the handset.
2 Press any key on the handset. The intercom mode is activated, but the
caller is still on hold.
3 To transfer the call to the handset, press
on the base. To cancel the
talk
transfer, press
on the handset.
Chain Dialing
The memory locations on the handset and base are not limited to phone
numbers, you may want to store in memory a group of numbers (up to 16
digits) that you need to enter once your call connects. This is referred to
as Chain Dialing.
[ 30 ] TELEPHONE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute (Handset/Base)
You can temporarily turn off the microphone so that the person you are
mute/pause
talking with cannot hear you. During a telephone call press
mute
(handset) or
(base) to turn off the microphone. Press mute again to
cancel muting.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually
change the phone’s channel for clear operation. Interference can come from
appliances or other phone in your home (see troubleshooting page 43).
Tone Dialing Switch-over
Some telephone companies use equipment that require pulse dialing
(sometimes referred to as rotary dialing). If you need to enter tone
dialing digits, you can switch-over to tone dialing during the call. An
example of this could be entering your bank account number after you
have called your bank. The digits of your bank account can be entered
using DTMF tones.
Initially make your call with the pulse dialing mode. Once your call
connects, press
. Enter the desired number (like in the example
above, the bank account number). These digits will be sent as tone
dialing. This special number can be stored in a memory location. This is
referred to as Chain Dialing (See page 30). Once the call ends, the tone
mode is canceled and pulse dialing resumes.
TELEPHONE FEATURES [ 31 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller’s
name and phone number on the display before you answer the phone.
Once the caller ID information is stored, the handset displays the phone
number of the incoming call, the name, time and the number of calls.
Additionally, you can dial the displayed number and store the information for
memory dialing. Make sure you have turned on the Caller ID/Call Waiting
feature (See page 12).
note
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the Caller
ID message will
When the Telephone Rings
1 When the Caller ID message is received, the display shows the caller’s
phone number. The incoming call information is stored in the Caller ID
record. If the Caller ID service includes the caller’s name, the caller’s
name appears on the display (up to 15 characters).
Here are some typical displays;
not appear.
• When the call is received
via a telephone company
that does not offer
The date and
time received
Number of calls
5/11 12:30PM 01
UNIDEN CORP
800-297-1023
Caller ID service, the
caller’s phone number
and name do not appear.
(This includes
from the same caller
Caller's name
Caller's phone number
international calls.)
When the phone number and
name data are received
Incoming Call
• When the call is via a
private branch exchange
(PBX), the caller‘s phone
number and name may
not appear.
When invalid data is received
Incoming Call
800-297-1023
[ 32 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
When a private name is received
When a private number is received
note
Incoming Call
Incoming Call
800-297-1023
• In Caller ID operation,
if no key is pressed for
more than 20 seconds,
an error tone sounds
and the telephone
returns to the
When an unknown name is received When an unknown number is received
Incoming Call
Incoming Call
800-297-1023
standby mode.
2 When you answer the call, the display changes to “Talk”.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
Viewing the Caller ID Message List
The Caller ID list stores information for up to 70 incoming calls - even
unanswered calls.
• Each message can be
up to 15 characters for
the phone number and
the name.
caller id
1 Press
. The summary screen appears.
New :01
Total:02
The screen shows the number of new messages and
total messages.
• Data errors appear as
“
”.
2 2
5/11 12:30PM 01
UNI EN CORP
800-2 -1023
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
2 Press
ª
to display the latest Caller ID message.
•
3 Press
ª
to see the next message. Or press
to
see previous message.
caller id
4 Press
to return to standby.
CALLER ID FEATURES [ 33 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Information from the Caller ID List
note
The EXI3965 stores up to 70 messages. If the phone receives the 71st
message, the oldest one in the list is automatically deleted. Caller ID data
can also be deleted manually.
If you get an incoming
call or page, the deleting
operation is canceled and
the telephone returns to
standby so you can
Deleting a Caller ID message
answer the call or page.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
caller id
1 Press
. Display the message to be deleted
•
from the Caller ID list by pressing
or ª .
Delete Message?
Yes
No
delete/channel
2 Press
3 Press
4 Press
.
•
or
ª
to select “Yes” or “No”.
int’cm/select
delete/channel
or
.
When the pointer is at “Yes”:
A tone sounds and the Caller ID message is deleted.
When the pointer is at “No”:
The display returns to the Caller ID message.
[ 34 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting all Caller ID names/numbers
note
caller id
1 Press
2 Press
3 Press
4 Press
.
delete/channel
•
New :01
Total:02
• While using the
“Delete All?”
screen, if no key is
pressed for more than
20 seconds, an error
tone sounds and the
telephone returns
to standby.
.
Delete All?
Yes
No
or ª to select “Yes” or “No”.
int’cm/select
delete/channel
or
.
When the pointer is at “Yes”:
A tone sounds and all stored Caller ID
messages are deleted.
Total:00
When the pointer is at “No”:
New :01
Total:02
The display returns to the summary screen.
Using the Caller ID List
Calling a party from the Caller ID list
You can place a call from the Caller ID list. The EXI3965 stores up to
70 messages.
• You cannot make a call
from the Caller ID list if
your EXI3965 is
connected to private
branch exchange (PBX).
12/21 12:30PM 03
UNIDEN CORP
800-297-1023
caller id
1 Press
. Display the message to be dialed
•
from the caller ID list by pressing
or ª .
• When a long distance
call has been set, “1”
appears in the display.
Talk
8002971023
talk
2 Press
. The displayed phone number
dials automatically.
CALLER ID FEATURES [ 35 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Long Distance calls and Area Code setting/cancellation
note
1
Pressing
while the incoming call information is displayed (in step 1)
3
will set or cancel a long distance call. Pressing
area code setting.
will set or cancel an
• You can not store
a Caller ID message if
no phone number
appears in the message.
Storing Caller ID messages in Memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone
number of the party on the Caller ID list can be stored in memory dialing.
• If there is an incoming
call or page, memory
storage is canceled and
the telephone is set to
receive the incoming
call or page.
caller id
1 Press
. Select the phone number to be stored
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
• Once a message from
the Caller ID list is
stored in a memory
location, the Caller ID
data can be edited.
(See page 25.)
•
from the Caller ID list by pressing
or ª .
2 Press
.
Select Location
01 UNIDEN CORP
02 JONE DOE
•
3 Press
and ª or enter a two-digit number (01 - 30)
to select the memory location to be stored.
int’cm/select .
4 Press
If a message has already been
Replace Memory?
Yes
No
stored in the selected memory location, a
•
confirmation screen is displayed. Press
or ª to
int’cm/select
select “Yes” or “No”. Press
to overwrite.
The display returns to the Caller ID list.
If the memory location is available, you will need to
select a Dictinctive Ring option.
Distinctive Ring
No Selection
Ringer A
[ 36 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Using “Caller ID on Call Waiting” Service
“Caller ID”, “Call waiting”, and Caller ID on Call waiting are separate
services. CIDCW (Caller ID on Call Waiting) performs the same as
regular Caller ID on a call waiting number. You must subscribe to the
“Caller ID on call waiting (CIDCW) services” before you can use the
following features. The “Call waiting” service can also be used
independently. Please contact your local telephone company for
details.
1 When a new incoming call arrives during your
Talk 10:30
UNIDEN CORP
800-297-1023
current telephone call, the phone number and
the name of the caller are displayed.
flash
2 Press
. You will be able to talk with the second caller. The first
caller will be put on hold.
flash
3 To return to the first caller, press
again.
CALLER ID FEATURES [ 37 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting Deluxe Features
note
Your EXI3965 gives you new options for call waiting. At the touch of a button,
you can ask the caller to hold, send them to your voice mail service, or
conference them into your current call. You may be required to subscribe to
call waiting and call waiting deluxe to use these features. Not all features are
available in all areas. Check with your local telephone company for details.
• To activate features,
select “CW options”
in Caller ID setup. See
page 12.
• You can also answer
a waiting call
menu
1 When you receive a call waiting call, press
for a list of options.
immediately by
flash
pressing the
•
or number key pad (0 - 7)
2 Press the
, ª
key to select an option.
key, the first caller
will be placed on
hold. To return to the
original caller, press
flash
For example:
again.
4 times
2 times
int’cm/select
3 Press
. A confirmation screen will appear.
Your EXI3965 is pre-programmed with seven call waiting options. You may
select to ask the calling party to hold, send them a busy message,
forward them to your voice mail, or conference them into the current call.
You may also select to answer and drop the first caller or, at any time,
choose to drop the first or drop the last caller.
Check with your local telephone company for a full list of options.
[ 38 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
note
The digital security code is an identification code used to connect the
handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically
set. In the rare situation that you suspect another cordless telephone is
using the same security code, you can change the code.
If the handset battery
pack is completely
discharged or the battery
pack is removed, the
digital security code will
be lost. If this happens,
a new security code is set
automatically next time
the battery pack
1 Remove the handset from the base unit.
ghi
jkl
mno
4
5
8
6
int’cm/page
Press and hold
on the base.
pqrs
tuv
wxyz
7
9
#
is charged.
tone
2 While the handset is emitting the paging
sound, replace the handset to the base unit and
int’cm/page
oper
0
int'cm/page
volume
mute
continue to hold the
for 3 seconds.
int’cm/page
Release the
. The paging tone stops.
mic
Leave the handset on the base for more than 3
seconds. A random, new security code is set.
ADDITIONAL INFORMATION [ 39 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Face Plate
note
To remove the Face plate
To attach the Face plate
For additional face plate
colors visit our web site:
st
st
at
us
at
us
rin
g
e
r
re
d
ia
l/p
m
rin
em
g
or
e
y
r
re
d
f
ia
la
l/p
s
h
m
e
m
o
ry
fla
s
h
def
ef
o
in
t'c
m
/p
ag
e
int'cm
/pa
v
olum
g
e
e
v
o
lum
e
m
ic
m
ic
Headset Installation
Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert headset plug into the
headset jack. Your phone is ready for hands-free conversations.
(Headsets may be purchased by calling the Uniden Parts
Department or visiting the website. See Page 44.)
[ 40 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of
the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs
from the holes.
Maintenance
!
When slightly dirty
Wipe with a soft, dry cloth.
When very dirty
Wipe with a soft cloth that has been
dampened with diluted, neutral detergent.
Dry with a dry cloth.
When the charging terminals become dirty
Wipe with a dry cloth or a pencil eraser,
if necessary.
Do not use paint
thinner, benzene,
alcohol, or other
chemical products. Doing
so may discolor the
surface of the telephone
and damage the finish.
rin
ge
r
o
ff
sta
tus
rin
ge
r
re
di
al
/p
m
em
or
y
fla
sh
1
ab
2
c
de
3
f
redial
gh
4
i
5
jkl
caller id
m
6
no
pq
rs
7
ta
5
lk
tu
8
v
in
t'c
m
fla
f
wxyz
s
h
9
select
1
i
2
ab
c
op
e
r
0
de
int'cm/page
3
#
4
rs
gh
volum
e
jkl
mn
o
6
7pq
ne
mic
8
tu
v
9
w
xy
z
to
0
op
er
#
mute
pause
m
enu
memory
delete
channel
contacts
ADDITIONAL INFORMATION [ 41 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged,
please replace the battery. With normal usage, your battery should last
about one year. Please contact your place of purchase or the Uniden Parts
Department for a replacement battery. (See Page 44.)
Power Failure
During the period that the power is off, you will not be able to make
or receive calls with the telephone.
RECYCLING NICKEL-CADMIUM BATTERIES
NICKEL-CADMIUM BATTERIES MUST BE DISPOSED OF PROPERLY.
Nickel-cadmium cells are used in the battery pack. Please
take your used nickel-cadmium battery packs to a store that
recycles nickel-cadmium batteries.
Caution
• Use the specified battery pack.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
[ 42 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The status LED won’t light
when the handset is placed
in the base unit.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Make sure the handset is properly seated in the base unit.
• Make sure the charging contacts on the handset and base unit are clean.
delete/channel
during a call to help eliminate background noise.
The audio sounds weak
and/or scratchy.
• Press
• Make sure that the base unit antenna is in a vertical position.
• Move the handset and or base unit to a different location away from metal objects
or appliances and try again.
• Make sure that you are not too far from the base.
Can’t make or receive calls.
• Check both ends of the base unit telephone line cord.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Reset the digital security code (See page 39).
talk
• Make sure
is pressed.
The handset doesn’t ring or
receive a page.
• The battery pack may be weak. Charge the battery on the base unit for 15 - 20
hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Reset the digital security code (See page 39).
Severe noise interference
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID/CIDCW does
not display.
• The handset was picked up before the second ring.
• The call was placed through a switch board.
• Call your local telephone company to verify your Caller ID service is current.
• Make sure that the CIDCW option is set to “CIDCW on” or “CW options”.
ADDITIONAL INFORMATION [ 43 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
note
The EXI3965 complies with FCC Parts 15 and 68.
Operating Temperature:
0°C to +50°C (+32°F to +122°F)
If the handset is left off
of the base, the actual
Talk Mode duration will be
reduced respective to the
amount of time the
AC Adapter Information
AC Adapter part number: AD-312
Input Voltage:
Output Voltage:
120V AC 60Hz
9V DC 350 mA
handset is off the base.
Battery Information
Battery part number:
Capacity:
BT-905
600 mAH, 3.6V
Battery Use Time (per charge)
From fully charged:
Talk Mode duration
6 hours
Standby Mode duration 10 days
With normal usage, the battery should last about one year.
Replacement batteries may be purchased at your local Uniden dealer or by
contacting the Uniden Parts Department (800) 554-3988. Hours are from 7:00 a.m.
to 5:00 p.m. Central Time, Monday through Friday. We can also be reached on the
Specifications, features, and availability of optional accessories are all subject
to change without prior notice.
[ 44 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
the owner’s manual.
Precautions!
2. Do not dispose of the battery pack in a fire. The cell may
explode. Check the nickel-cadmium battery disposal package
insert for disposal instructions.
Before you read anything else, please observe the following:
Important Safety Instructions
Warning!
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be
toxic if swallowed.
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to
the unit, DO NOT expose this unit to rain or moisture.
1. Read and understand all instructions.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with
this product only in accordance with the instructions and
limitations specified in the owner’s manual provided for this
product.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a
dry cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
Rechargeable Nickel-Cadmium Battery Warning
•
•
This equipment contains a rechargeable nickel-cadmium battery.
Cadmium is a chemical known to the State of California to cause
cancer.
The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable nickel-cadmium battery used in
this equipment in any charger other than the one designed to
charge this battery as specified in the owner’s manual. Using
another charger may damage the battery or cause the battery to
explode.
•
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your dealer or local
power company.
8. Do not allow anything to rest on the power cord. Do not locate
this product where the cord will be damaged by persons walking
on it.
9. Do not overload wall outlets and extension cords, as this can
result in the risk of fire or electrical shock.
10.Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
11.To reduce the risk of electric shock, do not disassemble this
product. Take it to qualified service personnel when service or
repair work is required. Opening or removing covers may expose
you to dangerous voltages or other risks. Incorrect reassembly
can cause electric shock when the appliance is subsequently used.
12.Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
6. Observe proper polarity orientation between the battery pack and
battery charger.
•
•
SAVE THESE INSTRUCTIONS!
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
Warning!
Please do not attempt to unplug any appliance during an electrical
storm.
The FCC Wants You To Know
•
Uniden voluntarily participates in an RBRC® industry program to
collect and recycle nickel-cadmium batteries at the end of their
useful life, when taken out of service within the United States.
The RBRC® program provides a convenient alternative to placing
used nickel-cadmium batteries into the trash or municipal waste
stream, which is illegal in some areas.
Through the RBRC® program, Uniden makes it easy for you to
drop off the used battery at local retailers of replacement nickel-
cadmium batteries. You may also contact your local recycling
center for information on where to return the used battery. Please
call 1-800-8-BATTERY for information on Ni-Cd battery recycling
in your area. Uniden's involvement in this program is part of its
commitment to protecting our environment and conserving
natural resources.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as
detailed by the owner’s manual, could void your authority to operate
this product. The equipment cannot be used on public coin phone
service provided by the telephone company. Connection to party line
service is subject to state tariffs. (Contact the state public utility
commission, public service commission or corporation commission for
information.)
•
Range
Your new phone is designed to achieve the maximum possible range
by transmitting and receiving according to the highest specifications
set forth by the FCC. We have rated this phone to operate at a
maximum distance with the qualification that the range depends
upon the environment in which the telephone is used. Many factors
limit range, and it would be impossible to include all the variables in
our rating. The Maximum Range rating of this phone is meant to be
used as a means of comparison against other range claims.
•
RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following
the operating instructions. (Adjust only those controls that
are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will
often require extensive repair work by a qualified
technician.)
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Telephone Line Problems
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the
telephone line. Also, the telephone company may make changes in
facilities and services which may affect the operation of your unit.
However, your telephone company must give adequate notice in
writing prior to such actions to allow you time for making necessary
arrangements to continue uninterrupted service.
E. If the product has been dropped or the cabinet has been
damaged.
F. If the product exhibits a distinct change in performance.
13.Do not use the telephone to report a gas leak in the vicinity of
the leak.
Additional Battery Safety Precautions
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your
problem. If you determine that it is the cause, you must leave it
disconnected until the trouble has been corrected.
Caution! To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
1. Use only the appropriate type and size battery pack specified in
ADDITIONAL INFORMATION [ 45 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Interference
Telephone Line Outlets
One Year Limited Warranty
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This
interference is caused by external sources such as TV, refrigerator,
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is
NOT DEFECTIVE. If these noises continue and are too distracting,
please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the base not
be plugged into a circuit that also powers a major appliance because
of the potential for interference. Be certain that the antenna on the
unit is fully extended when needed.
There are two types of phone outlets:
Important:Evidence of original purchase is required for warranty
Modular Jack
service.
Most phone equipment available now uses modular jacks. Phone
cords are fitted with a molded plastic connector which plugs into
this type of jack. If you do not have modular phone jacks, contact
your local telephone company for information about their
installation.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions
set out below.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of
installation is not difficult; however, you should contact your Uniden
telephone dealer or a telephone supply store for advice about the
proper adapter or converter for your particular situation.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty,
(E) used in any conjunction with equipment or parts or as part of
any system not manufactured by Uniden, or (F) installed or
programmed by anyone other than as detailed by the owner’s manual
for this product.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference, you
need to change to a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the
interference.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone
cords:
Caution!
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in effect,
warrantor will either, at its option, repair or replace the defective
unit and return it to you without charge for parts, service, or any
other cost (except shipping and handling) incurred by warrantor or
its representatives in connection with the performance of this
warranty. Warrantor, at its option, may replace the unit with a new or
refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE
SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN
LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow this exclusion or limitation of incidental or
consequential damages so the above limitation or exclusion may not
apply to you.
•
Use caution when installing or modifying telephone lines.
More Than One Cordless Telephone
Applying Power to the Base
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to
select a channel that provides the clearest communication.
This phone requires an AC outlet, without a switch to interrupt
power, and the included AC adapter. To relieve strain on the DC plug
when the phone is placed on a desk or table, wrap the power cord
around the strain relief notch on the bottom of the base.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other
than your own cordless telephone unit. Consequently, any
communications using your cordless telephone may not be private.
NOTE:
Place the power cord so that it does not create a trip
hazard, or where it could become chafed and create a
fire or other electrical hazards.
Adapter Safety Features
If the AC adapter furnished with this phone
has a polarized line plug (a plug having one
blade wider than the other), this plug will fit
into the power outlet only one way. If you
are unable to insert the plug fully into the
outlet, try reversing the plug.
Installation Considerations
Selecting a Location
Before choosing a location for your new phone, there are some
important guidelines you should consider:
LEGAL REMEDIES: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This
warranty is void outside the United States of America.
Do not alter the shape of the blades of the
polarized plug!
•
The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which
does not have a switch to interrupt its power.)
Keep the base and handset away from sources of electrical noise
such as motors or fluorescent lighting.
NOTE:
If you cannot plug the AC
adapter into the outlet, contact someone about
replacing the outlet.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). The Product should include all parts and
accessories originally packaged with the Product. Include evidence of
original purchase and a note describing the defect that has caused
you to return it. The Product should be shipped freight prepaid, by
traceable means, to warrantor at:
•
Plug the AC Adapter into a standard 120 VAC wall outlet.
•
•
Be sure there is sufficient space to fully extend the base antenna.
The base can be placed on a desk or tabletop or mounted on a
standard telephone wall plate.
You should charge your new phone for 15-20 hours before
completing the installation or using the handset.
Do not use an outlet controlled by a wall switch.
•
Use only the Uniden AC Adapter supplied with this phone.
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Fort Worth, TX 76155
[ 46 ] ADDITIONAL INFORMATION
(800) 297-1023, 7 a.m. to 7 p.m. Central, Monday through Friday
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
0 - 9
D
3-way conferencing . . . . . .28
18 ring options . . . . . . . .15
Deluxe Call Waiting Features . . 38
Dialing mode . . . . . . . . . . .9
Digital security code . . . . .39
Distinctive Ringer . . . . . . .15
P, Q
Package contents . . . . . . . .5
Precautions . . . . . . . . . . .45
A
Area Code . . . . . . . . . . . 13
Auto Talk . . . . . . . . . . . . 12
R
E, F, G, H
Receiving a call . . . . . . . .17
Redialing a call . . . . . . . .19
Ringer volume . . . . . . . . .14
Earpiece volume . . . . . . . .18
Face plate . . . . . . . . . . . .40
General information . . . . . .44
Headset installation . . . . .40
B
Base ringer . . . . . . . . . . .14
Base speaker volume . . . . . 18
Battery pack
S
Setting up
Preparing and charging . . .7
Replacement and handling 42
Beltclip . . . . . . . . . . . . .41
I, J, K, L
Important Safety
Instructions . . . . . . . . . .45
Intercom . . . . . . . . . . . . 29
Language . . . . . . . . . . . .16
Base unit . . . . . . . . . . .9
Handset . . . . . . . . . . . .7
T, U, V, W, X, Y, Z
C
Transfer . . . . . . . . . . . . .30
Transferring a call . . . . . . 30
Troubleshooting . . . . . . . .43
Warranty . . . . . . . . . . . . .46
Caller ID
Caller ID service . . . . . . .32
Calling . . . . . . . . . . . . 32
Call Waiting . . . . . . .18, 37
Deleting . . . . . . . . . . . .34
Setting . . . . . . . . . . . . 12
Storing . . . . . . . . . . . . 36
Using . . . . . . . . . . . . .35
Viewing . . . . . . . . . . . .33
Connection . . . . . . . . . . . .8
M, N, O
Maintenance . . . . . . . . . .41
Making a call . . . . . . . . . .17
Memory dialing
Editing . . . . . . . . . . . . 25
Erasing . . . . . . . . . . . .25
Making calls . . . . . . . . .23
Storing . . . . . . . . . . . .21
Mute . . . . . . . . . . . . . . .31
ADDITIONAL INFORMATION [ 47 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
[ 48 ] MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we’ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 7:00 a.m. to 7:00 p.m. CST.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|