Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Welcome / Features / Terminology
Controls and Functions
Mute (handset/base)
31
31
31
3
Selecting a different channel
Tone Dialing Switch-over
Getting Started
Checking the package contents
Setting up the phone
5
6
Caller ID Features
Caller ID
32
32
33
When the telephone rings
Viewing the Caller ID Message list
Caller ID Options
Setting caller ID options
Handset ringer volume setup
Handset ringer tone setting
Distinctive ringer setup
Selecting a language
12
14
14
15
16
Deleting information from the Caller ID list 34
Using the Caller ID list
35
37
38
Using “Caller ID on call waiting” service
Call waiting deluxe features
The Integrated Answering Device
Features
Turning the Answering System On/Off
Setting up your Answering System
Using your Answering System
Basics
39
40
40
47
Making and receiving calls
Redialing a call
17
19
20
Traveling out-of-range
Memory Dialing
Additional Information
Changing the digital security code
Changing the face plate
Headset installation
Installing the beltclip
Maintenance
Storing phone numbers, names and
distinctive ring
53
54
54
55
55
56
57
59
60
62
63
21
23
Making calls with memory dialing
Editing or erasing a stored name,
phone number or distinctive ring
25
Note on power sources
Troubleshooting
Telephone Features
3-way conferencing
Intercom/page Feature
Call Transfer Feature
Chain Dialing
28
29
30
30
General information
Precautions & Warranty
Index
Remote operation card
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Uniden EXAI3985 cordless telephone.
This phone is designed and engineered to exacting standards for reliability, long life
and outstanding performance.
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
Welcome
Features
• 900 MHz Extended Range
• Integrated Telephone Answering Device
(ITAD)
• Trilingual Language, option
• Flash and Pause
• Tone/Pulse Dialing
• 2-way lntercom
• 10 Day Standby Battery Life
• 6 Hour Talk Time
• Handset Earpiece and Ringer Volume Control
• Caller ID and Call Waiting Caller ID
• 70 Number Caller ID Memory
• 40 Number Memory Dialing (30 Handset & • Speakerphone
10 Base)
• 32 Digit Redial
• Distinctive Ring, options
• Voice Prompted Guidance through ITAD Setup Menu
AutoTalkTM allows you to answer a call by just removing the handset from the base.
AutoStandbyTM allows you to hang up by simply returning the handset to the base.
Random CodeTM protects you against misbilled calls, which might result from your phone being
activated by other equipment. Random Code digital security automatically selects one of approx.
65,000 digital security codes for the handset and base. Also, AutoSecureTM electronically locks
your phone when the handset is in the base.
Terminology
Digital Spread Spectrum Technology utilizes a “wider frequency band” vs. a “single narrow
band” used in standard digital transmissions. The result is a more secure conversation with the
clarity of digital sound, extended range, and minimal interference from other cordless phones.
talk
Standby Mode - The handset is not in use, is off of the base, and
dial tone is not present and the display is blank.
has not been pressed. A
talk
Talk Mode - The handset is not on the base and
Talkappears on the display.
has been pressed enabling a dial tone.
®
Uniden is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of Uniden America Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
1. Handset Antenna
2. Headset Jack Cover
3. Handset Battery Compartment
4. Handset Earpiece
5. LCD Display
1
6. Volume Up Key
7. Redial Key
4
2
8. Volume Down Key
9. Talk Key
10. /Tone Key
11. Mute/Pause Key
12. Menu Key
13. Caller ID Key
5
6
7
8
9
redial
caller id
13
14
talk
flash
int'cm
select
abc
def
1
4
2
5
8
3
6
15
ghi
jkl
mno
14. Flash Key
pqrs
7
tuv
wxyz
9
3
tone
oper
0
#
15. Intercom/Select Key
16. Delete/Channel Key
17. Memory Key
18. Handset Microphone
19. Handset Charging Contacts
10
11
12
16
17
18
mute
pause
menu
memory
delete
channel
19
CONTROLS AND FUNCTIONS [ 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
status
20. Base Speaker
24
20
ans. on/off
21. Mute/Menu Key
22. Redial/Pause Key
23. Base Charging Contacts
24. Status LED
25
26
27
28
29
30
memo/rec
delete
mute/menu redial/p
memory flash/set
21
22
31
32
25. Answer On/Off Key
26. Delete Key
27. Memo/Record Key
abc
def
1
4
2
5
8
3
6
ghi
jkl
mno
33
34
pqrs
tuv
wxyz
28.
29.
30.
Key (Fast Forward)
Key (Play/Stop)
Key (Rewind)
7
9
#
tone
oper
0
23
int'cm/page
volume
35
36
31. Flash/Set Key
32. Memory Key
33. Base Antenna
34. /Tone Key
mic
37
38
35.
(Talk Key)
36. Base Speaker Volume Keys
37. Intercom/Page Key
38. Base Microphone
39. DC Power Input
40. Phone Jack
39
40
[ 4 ]
CONTROLS AND FUNCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Package Contents
sta
tus
ans
.
on
/off
del
me
mo
/rec
ete
mu
te/
me
nu
red
ial/
p
me
mo
ry
fla
sh
/se
t
1
2
abc
r
id
3
def
calle
4
ghi
l
redia
5
jkl
6
mno
pq
rs
7
8
tuv
flash
t
se
lec
int'cm
9
wxyz
talk
ton
e
f
de
0
oper
3
6
int'
cm
abc
jkl
/pa
ge
2
#
1
volu
me
o
mn
mic
5
ghi
4
z
xy
w
9
v
tu
8
rs
pq
7
#
er
op
n
to
e
0
e
let
nel
an
de
ch
ry
mo
me
nu
me
te
mu
e
us
pa
• Base unit
• Handset
• AC adapter
• Rechargeable
battery pack
• This Owner’s Manual
/set
flash
ory
mem
u
/men
mute
re
dial/p
• Quick Reference Guide
tone
e
volum
/page
int'cm
mic
• Telephone line cord
• Beltclip
• Face plate
Uniden Parts Department
(800) 554-3988
Hours: M-F 7:00 AM to 5:00 PM CST.
GETTING STARTED [ 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Phone
Do the following steps:
A. Choose the best location
B. Install the battery pack
C. Connect the base unit
D. Choose the dialing mode
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in
the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important
guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid television sets and
other electronic equipment
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration, or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet that is
not switchable.
• Keep the base and handset away from sources of electrical noise such as motors, microwave
ovens, and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The base can be placed on a flat surface such as desk, tabletop, or mounted on a standard
wall plate.
[ 6 ]
GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Install the battery pack
note
Place the handset on the base unit and charge the battery pack for at
least 15-20 hours before plugging the phone line into your phone.
• Use only the Uniden
Battery supplied with
your phone.
Replacement batteries
are also available
through the Uniden
Parts Department
(See page 59) or
• Even when the battery
pack is not being used,
it will gradually
Battery use time (per charge)
From fully charged:
• 6 hours continuous use.
• 10 days when the handset is in the standby mode.
discharge over a long
period of time. For
optimum performance,
be sure to return the
handset to the base
unit after each
Low battery alert
If the phone is not in use, “Low Battery” appears on
the LCD and none of the keys will operate. If the phone
is in use, “Low Battery” flashes and the handset
beeps. Complete your conversation as quickly as
possible and return the handset to the base unit
for charging.
telephone call.
• If you must replace the
battery pack during a
telephone call,
complete the
replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
GETTING STARTED [ 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Connect the base unit
!
1 Connect the AC adapter to the
DC IN 9V jack and a standard 120V AC
wall outlet.
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed and
create a fire or
2 Set the base on a desk or tabletop,
Pull back stand out for base support
and place the handset on the base
unit as shown.
electrical hazard.
3 Raise the antenna to a vertical
note
position.
4 Make sure the status LED lights. If the LED does not
The handset can be
placed face up or face
down in the base
for charging.
re
di
al
ca
lle
r
i
sta
d
tus
ta
5
light, check to see that the AC adapter is plugged in.
lk
int'cm
se
.
on
/off
fla
me
m
s
h
1
i
del
ete
lec
t
2
ab
c
def
3
4
gh
jkl
m
6
no
7pqr
s
8
tuv
mu
wxyz
te/
me
9
nu
re
tone
dia
l/p
me
m
0
oper
sh
/se
t
#
mu
1
te
e
pa
m
e
us
ab
nu
2
c
m
em
or
y
de
an
3
de
let
ne
e
l
ch
4
gh
i
5
jkl
m
no
6
pq
rs
7
• Use only the supplied AC adapter. Do not use any other AC adapter.
8
tu
v
wx
9
yz
t
note
0
op
e
r
int
'cm
/pa
ge
#
vo
lum
e
mi
c
• Connect the AC adapter to a continuous power supply.
tip
5 Connect the telephone line cord to the TEL LINE jack
and a telephone outlet once the handset is
fully charged.
If your telephone outlet
isn’t modular, contact
your telephone company
for assistance.
Modular
[ 8 ]
GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Choose the dialing mode
Most phone systems use tone dialing, which sends DTMF tones through the
phone lines. However, some phone systems still use pulse dialing such as in
rural areas. The default setting is tone dialing. Depending on your dialing
system, set the mode as follows:
Base Setting only
note
flash/set
1 Press and hold
until you hear a confirmation tone.
Make sure your battery
pack is fully charged
before choosing the
dialing mode.
#
2 To set the dial mode for pulse dialing, press
. Or to set the dial
mode for tone dialing, press
. A confirmation tone sounds to
indicate the setting is complete.
• If you are not sure of your dialing system, set for tone dialing. Make a
trial call. If the call connects, leave the setting as is, otherwise set for
pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF
tones for certain situations during a call, you may “switch-over” to tone
dialing (refer to “Tone Dialing Switch-over” on page 31).
GETTING STARTED [ 9 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Base Unit on a Wall
Setting the handset retainer clip for wall mounting
!
1 On the base unit, pull the handset retainer clip out of
the slot and rotate it clockwise 180 degrees.
DO NOT use an outlet
controlled by a
wall switch.
Flip the hook tab over
so the tab holds the
handset.
2 Flip the retainer clip from front to back. Slide it back
into the slot so that the lip of the retainer is up and
the
is down. The retainer holds the handset
M
in place.
Standard wall plate mounting
This phone can be mounted on any standard
Single-Line
Raise the
antenna.
wall plate.
Telephone Jack
(RJ11C)
1 Route the AC adapter cord inside the molded
Telephone
Line Cord
wiring channel as shown.
2 Plug the telephone line cord into the
TEL LINE jack. Route the cord inside the
molded wiring channel as shown.
Power Outlet
(AC 120V, 60Hz)
3 Raise the antenna to a vertical position.
AC Adapter
4 Align the mounting slots on the base with the mounting posts on the
wall. Then push in and down until the phone is firmly seated.
[ 10 ] GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly
to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid
excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the
base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1 Insert two mounting screws into the wall, (with their
appropriate anchoring device), 3-15/16 inches apart.
Allow about 1/8 of an inch between the wall and screw
heads for mounting the phone.
2 Set the retainer clip if necessary.
3 Refer to steps 1 through 4 on page 10 to mount
the telephone.
GETTING STARTED [ 11 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Caller ID Options
note
There are three Caller ID setup options available;
Auto Talk
CIDCW
Area Code
You must subscribe to
Caller ID on Call Waiting
in order to use
AutoTalk allows you to answer the phone without
talk
pressing the
button. If the phone rings when AutoTalk is on, simply
this feature.
remove the handset from the base and the phone automatically answers
the call. Or if the handset is not on the base, press any key to answer the
call. If the phone rings when AutoTalk is off, you must press
answer the call.
to
talk
talk
1
flash
int'cm
select
Caller ID on Call Waiting (CIDCW) performs the same
as regular Caller ID on a Call Waiting number. Call
Waiting options allow you to handle Call Waiting calls in
six different ways. (See page 38.)
abc
def
2
5
8
3
ghi
jkl
mno
4
6
pqrs
7
tuv
wxyz
9
You must subscribe to a Call Waiting and Call Waiting
options from your phone company in order to use
this feature.
tone
oper
0
#
mute
pause
menu
memory
delete
channel
To change your Caller ID options:
Memory Edit
Ringer Volume
Ringer Tones
menu
1 Press
. The following screen appears.
2 Press ª to move the pointer to “Caller ID
Distinct.Ring
Caller ID Setup
Language
int’cm/select
Setup”. Then press
.
•
3 Use
or ª to move the pointer to the selection
Auto Talk
CIDCW
Area Code
int’cm/select
that you would like to change, then press
.
[ 12 ] CALLER ID OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
•
4 Use
and ª to move the pointer between “Auto Talk On” or
“Auto Talk Off”. For “CIDCW”, choose “CIDCW On” ,“CW Options”
or “CIDCW Off” depending upon the type of service to which
you subscribe.
int’cm/select
Press
to make your selections and a confirmation tone
will sound. To complete the setting, make sure to return the handset to
the base.
note
Entering your area code
If you enter a 3-digit area code number in the “Area Code” option, your
local area code does not appear in the Caller ID messages. For calls received
from outside your local area code, you will see a full 10-digit number.
• If your calling area
requires 10-digit
dialing, do not program
this option.
menu
1 When the phone is in the standby mode, press
.
• When the area code has
already been stored in
memory, the stored area
code will be displayed.
To change it, use the
ª
2 Press
to move the pointer to “Caller
Auto Talk
CIDCW
Area Code
ID Setup”.
int’cm/select
Then press
. The Caller ID setting
delete/channel
and
screens appears.
number keypad to enter
the new area code.
ª
3 Use
to move the pointer to the “Area Code”, then press
int’cm/select
• To complete the setting,
.
press
and
int’cm/select
return the handset to
the base unit.
4 Use the number keypad (0 to 9) to enter a 3-digit
Area Code
area code.
int’cm/select
5 Press
, and a confirmation tone will sound.
CALLER ID OPTIONS [ 13 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset Ringer Volume Setup
Handset ringer volume setting
note
When you select
“Ringer Off” ,
<Ringer Off> appears
on the handset display.
menu
1 When the phone is in the Standby Mode, press
.
ª
2 Press
to move the pointer to “Ringer Volume”.
Then press int’cm/select .
•
3 Press
or
ª
to move the pointer through the
Ringer High
Ringer Low
Ringer Off
ring settings.
int’cm/select
4 Press
to complete the ringer volume setting and you will
hear the confirmation tone. Then the handset returns to the menu
screen.
Handset Ringer Tone Setting
menu
1 When the phone is in the Standby Mode, press
.
ª
2 Press
to move the pointer to “Ringer Tones”.
int’cm/select
Then press
.
You can choose from 8 ringers or 10 melodies:
• Ringer [A - H]
• Melodies [Home Sweet Home, Sweetheart, Aura Lee,
Beethovens #9, When Irish Eyes, Merry Christmas,
Old MacDonald, Twinkle Twinkle, For Elise, Aloha Oe]
Ringer A
Ringer B
Ringer C
[ 14 ] CALLER ID OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
•
ª
3 Press
or
to move the pointer and you will hear the ringer or
the melody as you scroll through the options.
int’cm/select
4 Press
and you will hear a confirmation tone.
Distinctive Ringer Setup
note
If you have set multiple memory locations with distinctive rings,
switching the setting to “Distinctive Off” will result in no distinctive
ringing. All incoming calls will have a normal ring tone. Switching to
“Distinctive On” will activate all programmed distinctive ring
memory locations.
For more details regarding
the Distictive Ring setup
see page 22.
menu
1 Press
. Then press
ª
to move the pointer to
“Distinct. Ring”.
int’cm/select
2 Press
to select “Distinct.Ring”.
•
3 Use
or
ª
to select “Distinctive On” or
Distinctive On
Distinctive Off
“Distinctive Off”.
int’cm/select
4 Press
and a confirmation tone will sound.
CALLER ID OPTIONS [ 15 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Language
menu
1 When the phone is in the Standby Mode, press
.
ª
2 Press
to move the pointer to “Language".
int’cm/select
English
French
Spanish
Then press
appears.
. The Language setting screen
•
ª
3 Use
or
to move the pointer to the desired selection.
int’cm/select
Then press
to complete the setting, and a confirmation tone
will sound.
[ 16 ] CALLER ID OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Receiving Calls
note
• The base microphone
is located under the
phone. Position yourself
as near to the base as
possible and
From the Handset
From the Base
Handset On the Base
Pick up the Handset (Auto Talk
Press
(talk).
To answer
speak clearly.
talk
on) or press
.
a call
Handset Off the Base
delete/channel
• Press
if
talk
Press
.
you enter a wrong
number. To delete all
the numbers that you
have entered, press and
talk
1) Press
.
1) Press
2) Listen for the dial tone.
3) Dial the number.
(talk).
delete/channel
hold
2) Listen for the dial tone.
3) Dial the number.
until the display clears.
To make
a call
OR
1) Dial the number.
talk
2) Press
.
talk
Press
, or return the handset Press
(talk).
To hang
up
to the base (Auto Standby).
BASICS [ 17 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting
Note: You must subscribe to Call Waiting service to use this feature.
When a call is received during a telephone call already in progress,
flash
press
to switch to the new call. If you also subscribe to Call Waiting
on Caller ID, you will see the name and number of the caller in
Call Waiting. (See page 37.)
Adjusting Earpiece Volume
•
Pressing
or
ª
during a call will change the earpiece volume. This
setting will remain in effect after the telephone call has ended.
Volume
Maximum
Volume
High
Volume
Medium
Volume
Low
ª
•
ª
•
ª
•
Base Volume
•
Pressing
or
ª
during a call will change the volume of the base.
[ 18 ] BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing a Call
note
The last three phone numbers dialed can be quickly redialed.
• If the number exceeds
32 digits, only the first
32 digits are retained
for redial.
Redialing from Standby Mode
redial
1 Press
. The phone number that was
Most
recent
8002971023
last dialed appears on the display.
redial
redial
2 Press
again. Each press of
will
• Press and hold
delete/channel
to delete
display one of the last three numbers dialed.
the displayed
redial number.
talk
3 Press
. “Talk” appears on the display,
then the volume setting is displayed.
4 Then the selected number is dialed. After
about 5 seconds, the call-time display appears.
talk
5 To hang up, press
or return the handset
to the base. The call-time will be displayed
for about 5 seconds.
Redial from Talk Mode
• Only the last number
dialed can be accessed
talk
talk
1 Press
. “Talk” and the volume setting appear
after
has
on the display.
been pressed.
redial
2 Press
. The last number dialed will be
Talk 0:17
8002971023
displayed and redialed.
talk
3 To hang up, press
or return the handset to
the base. The call-time will be displayed for
about 5 seconds.
BASICS [ 19 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Base
status
1 To call the last number dialed from the base,
press
(talk key).
ans. on/off
memo/rec
delete
redial/p
2 Press
. The last number dialed from the base
is redialed.
mute/menu redial/p
memory flash/set
3 To hang up, press
(talk key).
abc
def
1
4
2
5
8
3
6
ghi
jkl
mno
pqrs
tuv
wxyz
7
9
#
tone
oper
0
int'cm/page
volume
mic
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base
unit, noise increases. If you pass the range limits of the base unit, your
call will terminate within 30 seconds.
[ 20 ] BASICS
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Phone Numbers, Names and Distinctive Rings
note
Memory Dialing allows you to dial a number using just a few key strokes.
Your EXAI3985 stores up to 30 names/numbers in the handset plus
10 numbers in the base.
• In memory dialing
operation, you must
press a key within 20
seconds or the phone
will return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
With the handset
menu
Memory Edit
Ringer Volume
Ringer Tones
1 Press
. The following
screen appears.
int’cm/select
2 Press
to select
Memory Edit
01
02
delete/channel
“Memory Edit”.
• Press
to delete an incorrect
character, then enter
the correct character.
To delete all characters
press and hold
•
3 Press
, ª to move the pointer
to the memory location of
your choice.
redial
caller id
delete/channel
or
.
talk
flash
int'cm
select
Press number keypad (0-3) for
tens’ digit and press number
keypad (0-9) for ones’ digit to
select the memory location.
int’cm/select
abc
def
1
4
2
5
8
3
6
ghi
jkl
mno
pqrs
7
tuv
wxyz
9
Press
.
tone
oper
0
#
4 “Store Name” appears on the
display. Then use the number
keypad to enter the name. Press
Store Name
mute
pause
menu
memory
delete
channel
redial
caller id
and
to move
back/forth between characters.
MEMORY DIALING [ 21 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
int’cm/select
5 Press
to store the name.
Store Number
note
“Store Number” appears on the display.
• The pause feature is
useful for long distance
calling, credit card
dialing, or sequences
that require a pause
between digits.
6 Press the number keypad to enter the phone number.
int’cm/select
Then press
to store the numbers.
•
7 “Distinctive Ring” appears. Press
or
ª
Distinctive Ring
No Selection
Ringer A
to move the pointer to one of the Distinctive
Ring options.
• “Distinctive Ring”
allows you to preset the
memory locations with
a designated ring tone.
When an incoming call
is received and the
Caller ID information
matches one of the 30
memory locations, the
Distinctive Ring that
has been stored for
that particular caller
will sound.
int’cm/select
8 Press
to complete the setting. You will
hear a confirmation tone.
If you choose not to store a distinctive ring
for each memory location, simply select the
“No Selection” option.
Memory04 stored
Number of times key is pressed
keys
1
1
2
3
4
5
6
7
8
9
1
A
D
G
J
M
P
T
W
*
2abc
3def
4ghi
5jkl
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
4
5
6mno
7pqrs
8tuv
9wxyz
0
6
r
s
7
9
8
y
z
0
(blank)
[ 22 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
With the Base
note
1 Press
. (Status LED blinks.)
status
• The 10 memory
locations in the base
are independent
locations from
2 Dial the number you wish to store. (The phone
ans. on/off
number cannot exceed 20 digits.)
memo/rec
delete
the handset.
3 Press
. Enter the memory location number
(0-9) on the keypad. The status LED stops
blinking. A confirmation tone sounds and the
number is stored.
• The 10 memory
locations are
mute/menu redial/p
memory flash/set
represented by the
numbers 0-9 on the
keypad. If you store
a number in one of
these locations, then
attempt to store a
different number in
the same location
later, the new
Making Calls with Memory Dialing
Memory dialing from Standby Mode
With the handset
redial
caller id
number will
1 Press
. The handset displays your programmed
overwrite the
talk
flash
int'cm
select
memory locations.
previous one.
abc
def
1
4
2
5
8
3
6
•
2 Press
and ª or enter a two-digit
ghi
jkl
mno
number (01 - 30) to select the
memory location you would like
to dial.
pqrs
7
tuv
wxyz
9
01 UNIDEN CORP
02 JOHN DOE
03 MOM AND DAD
tone
oper
0
#
mute
pause
menu
memory
delete
channel
talk
3 Press
. “Talk” and the volume
setting appear on the display. Then
the displayed number is dialed.
Talk
8002971023
MEMORY DIALING [ 23 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Display a programmed number while in memory location list
caller id
Press
Press
to review the details of a memory location.
to return to the program name list.
redial
Detail info.
Program name list
caller id
01 UNIDEN CORP
02 JOHN DOE
03 MOM AND DAD
03 MOM AND DAD
817-555-1212
Ringer D
Memory dialing from Talk Mode
note
talk
1 Press
. “Talk” and the
Talk
Talk
Volume Medium
volume setting appears.
Whenever you are
using a menu screen,
you must press a key
within 20 seconds or
the phone will return
to standby.
2 Press
.
Talk
0:00
3 Enter a two-digit number (01 - 30) to select the
memory location of the desired phone number.
The selected phone number is displayed. Then the
number is dialed.
Talk 0:35
8002971023
With the Base
(talk key)
1 Press
.
mute/menu redial/p
memory flash/set
abc
def
1
4
2
5
8
3
6
2 Press
. Enter the memory location number
ghi
jkl
mno
(0-9) and the number is dialed instantly.
pqrs
tuv
wxyz
7
9
#
tone
oper
0
int'cm/page
volume
[ 24 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing or Erasing a Stored Name, Phone Number or
Distinctive Ring
menu
1 Press
. The following screen appears.
Memory Edit
Ringer Volume
Ringer Tones
int’cm/select
2 Press
to select
“Memory Edit”.
•
3 Press
,
ª
to scroll through
Memory Edit
01 Uniden CORP
02 JOHN DOE
memory locations.
or
Press number keypad (0-3) for tens’ digit and press
number keypad (0-9) for ones’ digit to select the
int’cm/select
redial
caller id
talk
flash
memory location. Then press
the location to be edited.
to select
int'cm
select
abc
def
1
4
2
5
8
3
6
note
ghi
jkl
mno
•
4 Press
ª
or
to select the
Edit Memory01
Delete Memory01
Go Back
pqrs
7
tuv
wxyz
9
desired function and press
To delete all characters
press and hold
tone
oper
0
#
int’cm/select .
To edit the stored
delete/channel
.
data, select “Edit.” To delete the
data, select “Delete.” To return
to the previous screen, select
“Go Back.”
mute
pause
menu
memory
delete
channel
To edit data, go to step a. To delete data, go to step b.
(See page 26.)
MEMORY DIALING [ 25 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
a. Editing a stored name, phone number or distinctive ring
delete/channel
redial
1
Use the number keypad,
,
and
Memory01 Stored
caller id
to edit the name and numbers. Use
to scroll through distinctive ring list if
•
or
ª
you want to make a change.
int’cm/select
2
Press
when all editing is complete and a confirmation
tone sounds.
b. Deleting the stored data
•
1
2
Press
to move the pointer to “Yes”.
Delete Memory01?
Yes
No
int’cm/select
delete/channel
Press
or
.
There is a confirmation tone and the entry is
deleted. The following screen appears.
Memory01 Deleted
3
After a few seconds the display returns to the
“Memory Edit” screen.
Memory Edit
01
02 JOHN DOE
You may select another number to edit or press
to return to standby.
menu
[ 26 ] MEMORY DIALING
Download from Www.Somanuals.com. All Manuals Search And Download.
With the Base
note
1 Press
. (Status LED blinks.)
status
To edit the numbers that
you have stored in the
base, simply overwrite the
existing number. Refer to
“Storing Phone Numbers,
Names and Distinctive
Rings with the Base” on
page 23.
2 Press
again.
ans. on/off
memo/rec
delete
3 Enter the memory location number (0-9) of the
number you wish to delete. The status LED stops
blinking. A confirmation tone indicates the
number has been erased.
mute/menu redial/p
memory flash/set
MEMORY DIALING [ 27 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3-way Conferencing
note
The Uniden EXAI3985 permits 3-way conversations between
the handset, base and an outside line.
• Pressing the
on the
base while dialing with
the handset will set the
3-way conversation
mode. Dialing is
status
delete
ans.
on/off
mem
o/rec
When speaking on the handset
mu
te/m
enu
2
red
ial/p
me
mo
ry
flas
h/s
et
1
abc
3
def
4
ghi
5
jkl
6
wxyz
mno
7pqrs
8
tuv
9
ton
0
oper
int'c
m/p
age
#
volu
me
not affected.
mic
abc
def
1
4
2
5
8
3
6
1 Press
on the base unit
• During a 3-way
conversation, you can
only dial from
ghi
jkl
mno
to initiate the 3-way conversation.
pqrs
tuv
wxyz
7
9
#
tone
2 To hang up, press
on
the handset.
oper
0
the base. The handset will still
be connected to the call.
int'cm/page
volume
mic
When speaking on the base
talk
1 Press
on the handset to initiate the
redial
caller id
3-way conversation.
talk
flash
int'cm
select
2 To hang up, return the handset to the
abc
def
1
2
3
talk
base, or press
on the handset.
The base will still be connected to
the call.
[ 28 ] TELEPHONE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom/Page Feature
note
Intercom from the base to the handset
If the page is not answered
within one minute, the
paging sounds stops
automatically.
int’cm/page
1 Press
on the base. The handset beeps. (If no answer, press
int’cm/page
again to cancel.)
2 Press any key on the handset to answer. “Intercom” appears on the
display.
talk
3 To turn off the intercom, press
on the handset or
on the base.
Intercom from the handset to base
int’cm/select
int’cm/select
1 Press
on the handset. (If no answer, press
again
to cancel.)
int’cm/page
2 At the base, press
or
to answer. Speak into the base
microphone.
talk
3 To turn off the intercom, press
on the handset or
on the base.
TELEPHONE FEATURES [ 29 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Transfer Feature
To transfer from the handset to the base
int’cm/select
1 Press
on the handset. The caller is put on hold and the
intercom tone sounds on the base.
int’cm/page
2 Press
or
on the base. The intercom mode is activated,
but the caller is still on hold.
talk
3 To transfer the call to the base, press
on the handset. To cancel
the transfer, press
on the base.
To transfer from the base to the handset
int’cm/page
1 Press
on the base. The caller is put on hold and the
intercom tone sounds on the handset.
2 Press any key on the handset. The intercom mode is activated, but the
caller is still on hold.
3 To transfer the call to the handset, press
on the base. To cancel the
talk
transfer, press
on the handset.
Chain Dialing
The memory locations on the handset and base are not limited to phone
numbers, you may want to store in memory a group of numbers that you
need to enter once your call connects. This is referred to as Chain Dialing.
[ 30 ] TELEPHONE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute (Handset/Base)
You can temporarily turn off the microphone so that the person you are
mute/pause
talking with cannot hear you. During a telephone call press
mute
(handset) or
(base) to turn off the microphone. Press mute again to
cancel muting.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually
change the phone’s channel for clear operation. Interference can come from
appliances or other phone in your home (see “Troubleshooting” on page 57).
Tone Dialing Switch-over
Some telephone companies use equipment that require pulse dialing
(sometimes referred to as rotary dialing). If you need to enter tone
dialing digits, you can switch-over to tone dialing during the call. An
example of this could be entering your bank account number after you
have called your bank. The digits of your bank account can be entered
using DTMF tones.
Initially make your call with the pulse dialing mode. Once your call
connects, press
. Enter the desired number (like in the example
above, the bank account number). These digits will be sent as tone
dialing. This special number can be stored in a memory location. This is
referred to as Chain Dialing (See page 30). Once the call ends, the tone
mode is canceled and pulse dialing resumes.
TELEPHONE FEATURES [ 31 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller’s
name and phone number on the display before you answer the phone.
Once the caller ID information is stored, the handset displays the phone
number of the incoming call, the name, time and the number of calls.
Additionally, you can dial the displayed number and store the information for
memory dialing. Make sure you have turned on the Caller ID/Call Waiting
feature (See page 12).
note
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the Caller
ID message will
When the Telephone Rings
1 When the Caller ID message is received, the display shows the caller’s
phone number. The incoming call information is stored in the Caller ID
record. If the Caller ID service includes the caller’s name, the caller’s
name appears on the display (up to 15 characters).
Here are some typical displays;
not appear.
• When the call is received
via a telephone company
that does not offer
The date and
time received
Number of calls
5/11 12:30PM 01
UNIDEN CORP
800-297-1023
Caller ID service, the
caller’s phone number
and name do not appear.
(This includes
from the same caller
Caller's name
Caller's phone number
international calls.)
When the phone number and
name data are received
Incoming Call
• When the call is via a
private branch exchange
(PBX), the caller‘s phone
number and name may
not appear.
When invalid data is received
Incoming Call
800-297-1023
[ 32 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
When a private name is received
When a private number is received
note
Incoming Call
Incoming Call
800-297-1023
• In Caller ID operation,
if no key is pressed
within 20 seconds, an
error tone sounds and
the telephone returns
to the Standby Mode.
When an unknown name is received When an unknown number is received
Incoming Call
Incoming Call
800-297-1023
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
2 When you answer the call, the display changes to “Talk”.
Viewing the Caller ID Message List
• Each message can be
up to 15 characters for
the phone number and
the name.
The Caller ID list stores information for up to 70 incoming calls - even
unanswered calls.
caller id
1 Press
. The summary screen appears.
• Data errors appear as
New :01
Total:02
The screen shows the number of new messages and
total messages.
“
”.
2
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
2 Press
ª
to display the latest Caller ID message.
•
3 Press
ª
to see the next message. Or press
to
see the previous message.
caller id
4 Press
to return to standby.
CALLER ID FEATURES [ 33 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Information from the Caller ID List
note
The EXAI3985 stores up to 70 messages. If the phone receives the 71st
message, the oldest one in the list is automatically deleted. Caller ID data
can also be deleted manually.
If you get an incoming
call or page, the deleting
operation is canceled and
the telephone returns to
standby so you can
Deleting a Caller ID message
answer the call or page.
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
caller id
1 Press
. Display the message to be deleted
•
from the Caller ID list by pressing
or ª .
Delete Message?
Yes
No
delete/channel
2 Press
3 Press
4 Press
.
•
or
ª
to select “Yes” or “No”.
int’cm/select
delete/channel
or
.
When the pointer is at “Yes”:
A tone sounds and the Caller ID message is deleted.
When the pointer is at “No”:
The display returns to the Caller ID message.
[ 34 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting all Caller ID names/numbers
note
caller id
1 Press
2 Press
3 Press
4 Press
.
delete/channel
•
New :01
Total:02
• While using the
“Delete All?”
screen, if no key is
pressed within 20
seconds, an error tone
sounds and the
.
Delete All?
Yes
No
or ª to select “Yes” or “No”.
int’cm/select
delete/channel
or
.
telephone returns
to standby.
When the pointer is at “Yes”:
A tone sounds and all stored Caller ID
messages are deleted.
Total:00
When the pointer is at “No”:
New :01
Total:02
The display returns to the summary screen.
Using the Caller ID List
Calling a party from the Caller ID list
You can place a call from the Caller ID list. The EXAI3985 stores up to
70 messages.
• You cannot make a call
from the Caller ID list if
your EXAI3985 is
connected to a private
branch exchange (PBX).
12/21 12:30PM 03
UNIDEN CORP
800-297-1023
caller id
1 Press
. Display the message to be dialed
•
from the Caller ID list by pressing
or ª .
• When a long distance
call has been set, “1”
appears in the display.
Talk
8002971023
talk
2 Press
. The displayed phone number
dials automatically.
CALLER ID FEATURES [ 35 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Long distance calls and area code setting/cancellation
note
1
Pressing
while the incoming call information is displayed (in step 1)
3
will set or cancel a long distance call. Pressing
area code setting.
will set or cancel an
• You can not store
a Caller ID message if
no phone number
appears in the message.
Storing Caller ID messages in memory dialing
Messages shown in the Caller ID list can be stored in memory dialing.
Using the incoming call information (i.e., Caller ID list), the phone
number of the party on the Caller ID list can be stored in memory dialing.
• If there is an incoming
call or page, memory
storage is canceled and
the telephone is set to
receive the incoming
call or page.
caller id
1 Press
. Select the phone number to be stored
5/17 12:30PM 03
UNIDEN CORP
800-297-1023
• Once a message from
the Caller ID list is
stored in a memory
location, the Caller ID
data can be edited.
(See page 25.)
•
from the Caller ID list by pressing
or ª .
2 Press
.
Select Location
01 UNIDEN CORP
02 JOHN DOE
•
3 Press
and ª or enter a two-digit number (01 - 30)
to select the memory location to be stored.
int’cm/select .
4 Press
If a message has already been
Replace Memory?
Yes
No
stored in the selected memory location, a
•
confirmation screen is displayed. Press
or ª to
int’cm/select
select “Yes” or “No”. Press
to overwrite.
The display returns to the Caller ID list.
If the memory location is available, you will need to
select a dictinctive ring option.
Distinctive Ring
No Selection
Ringer A
[ 36 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
Using “Caller ID on Call Waiting” Service
“Caller ID”, “Call Waiting”, and Caller ID on Call Waiting are separate
services. CIDCW (Caller ID on Call Waiting) performs the same as
regular Caller ID on a call waiting number. You must subscribe to the
“Caller ID on Call Waiting (CIDCW) services” before you can use the
following features. The “Call Waiting” service can also be used
independently. Please contact your local telephone company
for details.
1 When a new incoming call arrives during your
Talk 10:30
UNIDEN CORP
800-297-1023
current telephone call, the phone number and
the name of the caller are displayed.
flash
2 Press
. You will be able to talk with the second caller. The first
caller will be put on hold.
flash
3 To return to the first caller, press
again.
CALLER ID FEATURES [ 37 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting Deluxe Features
note
Your EXAI3985 gives you new options for Call Waiting. At the touch of a
button, you can ask the caller to hold, drop them or conference them into your
current call. You may be required to subscribe to Call Waiting and Call Waiting
deluxe to use these features. Not all features are available in all areas. Check
with your local telephone company for details.
• To activate features,
select “CIDCW” in Caller
ID setup. See
page 12.
• You can also answer
a waiting call
menu
1 When you receive a call waiting call, press
for a list of options.
immediately by
flash
pressing the
•
or number key pad (1 - 6)
2 Press the
, ª
key to select an option.
key, the first caller
will be placed on
hold. To return to the
original caller, press
flash
For example:
again.
4 times
int’cm/select
3 Press
. A confirmation screen will appear.
For example:
Talk
Call Holding
Your EXAI3985 is pre-programmed with six call waiting
options. You may select to ask the calling
party to hold, send them a busy message.
You may also select to answer and drop the first
caller at anytime, conference them into the current call,
or choose to drop the first or drop the last caller.
Check with your local telephone company for a full list of options.
[ 38 ] CALLER ID FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
The Integrated Answering Device
The EXAI3985 has a built-in answering system that answers and records
incoming calls. You can also use your answering system to record a
conversation, leave a voice memo message, or to announce a special
outgoing message to callers when you’re away from your phone.
Features
• Digital Tapeless Recording
• 15 Minutes of Recording Time
• Call Screening
• Time and Day Announcement
• Remote Message Retrieval
• Toll Saver
• Selectable Outgoing Messages
• Voice Prompts for Menu Setup
Guidance
• Conversation Recording
• Voice Memo
Digital Tapeless Recording allows you to quickly review, save, or delete the
messages you choose. You will never have to worry about a tape wearing
out, jamming, or resetting improperly.
The Integrated Answering System is easy and convenient to use, but
please read through all of the instructions carefully.
THE INTEGRATED ANSWERING DEVICE [ 39 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Answering System On/Off
ans. on/off
1 To turn the answering system on, press
.
The current greeting message will be played and you
will hear a tone. The message counter displays the
number of messages stored in memory. If the display
flashes, then there are new messages waiting for you.
status
ans. on/off
memo/rec
delete
ans. on/off
2 To turn the answering system off, press
After the announcement “Answer off” the message
counter display will no longer be illuminated.
.
mute/menu redial/p
memory flash/set
Setting up your Answering System
Using the Menu Mode
The Menu mode allows you to set the following Answering System functions.
note
• To scroll through the menu options, repeatedly press
mute/menu
mute/menu
. The system returns to standby after the
"Greeting Message"
For your convenience,
voice prompts will guide
you through the menu
setup mode.
last menu option. A confirmation tone sounds to
mute/menu
indicate standby mode.
"Time"
mute/menu
• If any of the following occurs during menu setup, the
"Security Code"
handset returns to standby. Start over with menu
mute/menu
function prior to the interruption.
"Ringer Volume"
mute/menu
talk
-Press
-Press
"Ring Time"
-20 seconds lapse of time
mute/menu
• The idle time default setting is 20 seconds. If the
system remains idle for 20 seconds, an error tone
sounds and the system returns to standby.
• You can use volume L/M to adjust the announcement
volume level during a voice prompt/guidance.
"Record Time"
mute/menu
Return to standby
(tone sounds).
[ 40 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a
preset message or your own greeting.
MPreset message
note
The following message is prerecorded:
“Hello, no one is available to take your call. Please leave a message after
the tone.”
• You can record a
greeting up to 30
seconds long.
MRecording a personal outgoing message (Greeting)
• Position yourself as near
to the base as possible
and speak clearly when
recording your
mute/menu
1 Press
.
You hear the announcement “Greeting message”, and the message
counter displays [ ]. The current greeting message will be played on
the base speaker.
outgoing message.
• To exit menu mode,
memo/rec
2 Press
to start recording your message. Start your recording
press
.
after the announcement “Record your greeting after the tone”.
• To delete the
personal Greeting,
delete
memo/rec
3 When you are finished recording your greeting, press
,
or
press
and the
flash/set
. You will hear a confirmation tone and your recorded greeting
system announces
“Your greeting has
been deleted”.
plays back for you.
MChoosing between the two outgoing messages
mute/menu
Press
. Then press
or
when the outgoing message is
played. This switches between the pre-recorded greeting or the personal
greeting. Press
confirmation tone is heard.
flash/set
to select the greeting of your choice. A
THE INTEGRATED ANSWERING DEVICE [ 41 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time
The clock on the EXAI3985 answering system starts when power is applied
to the base. Follow these steps to set the clock to the correct time.
mute/menu
1 Press
twice.
The system announces the current time. The message
counter displays [ ].
status
ans. on/off
memo/rec
delete
flash/set
2 Press
to select the day of the week.
You hear the current day and the number ([ ]
through [ ]) is displayed on the base.
note
mute/menu redial/p
memory flash/set
3 Press
or
until the correct day is announced
• Normally the idle time
for the menu mode is
20 seconds before the
system returns to
standby. However for
setting the time, the
idle time is extended to
two minutes.
and the corresponding number is displayed.
flash/set
4 Press
5 Press
to select the day.
or
until you hear the correct hour
setting. The numbers [ ] through [ ] are displayed
on the base as each hour is announced.
• Press and hold
or
flash/set
6 Press
7 Press
to select the hour.
to quickly scroll
through numbers on the
display.
or
until you hear the correct minute
setting. The numbers [ ] through [ ] are
displayed on the base as each minute is announced.
flash/set
8 Press
to select the minute.
[ 42 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Press
or
until you hear the correct AM or PM setting. The
message counter displays [ ] or [ ].
flash/set
10 Press
to select the AM/PM setting.
A confirmation tone sounds, then the day and time are announced for
your review.
Setting a Personal Security Code
note
To play your messages from a remote location, you will need to enter a
two-digit Personal Identification Number (PIN) code (00-99). To select a
PIN, perform the following steps:
The PIN code is set to
“80” when you purchase
the EXAI3985.
mute/menu
1 Press
three times.
The current PIN code is announced as it is displayed
on the base.
status
ans. on/off
memo/rec
delete
flash/set
2 Press
to change the PIN code. The system
announces current PIN code.
mute/menu redial/p
memory flash/set
3 Press
or
until the desired number appears.
to select the PIN code.
flash/set
4 Press
A confirmation tone sounds, system announces the
new PIN code.
To exit the menu mode, press
if desired.
THE INTEGRATED ANSWERING DEVICE [ 43 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the base ringer volume
note
You have three ringer options. One allows you to turn
the base ringer off. The other two are volume levels.
status
• When you have set the
base ringer to off and
the handset is on the
base, you will still hear
the ringer from the
handset.
ans. on/off
mute/menu
1 Press
four times.
delete
memo/rec
You hear the current ringer option ([ ] High, [
Low, [ ] off), and it is displayed on the base.
]
mute/menu redial/p
memory flash/set
flash/set
2 Press
to change the ringer volume.
• If you have set the
handset ringer also to
off, no ring will sound.
3 Press
or
until the desired ringer option appears.
to select the ringer option. The
flash/set
4 Press
system announces new ringer volume.
To exit the menu mode, press
if desired.
Adjusting the speaker volume level
Adjust the volume of the base speaker by pressing the
volume keys on the base. Press L for louder or M
for softer.
abc
def
1
2
5
8
3
ghi
jkl
mno
4
6
pqrs
tuv
wxyz
7
9
tone
The numbers 0-9 are displayed on the base indicating
the volume levels. 0 being the softest and 9 being
the loudest.
oper
0
#
int'cm/page
volume
mic
[ 44 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller
hears before your answering system plays the outgoing message. You can
set the ring time to answer after two, four, or six rings. Setting
(Toll Saver), the answering system picks up after two rings if you have
new messages, and after four rings if there are none. This way, if you
make a long distance call to check your messages, you can hang up after
the second ring to avoid billing charges.
mute/menu
1 Press
five times.
The current ring time setting is announced ([ ] 2,
[ ] 4, [ ] 6, [ ] Toll saver), and it is displayed
on the base.
status
ans. on/off
delete
memo/rec
flash/set
2 Press
to change the ring time.
3 Press
or
until the desired ring time appears.
to select the new ring time.
mute/menu redial/p
memory flash/set
flash/set
4 Press
A confirmation tone sounds, the system announces
the new ring time.
THE INTEGRATED ANSWERING DEVICE [ 45 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the message record time
note
You have three record time options. The options “1 minute”, or
“4 minutes” set the duration for recording the incoming messages.
“Announce only” answers the call with the preset greeting or your
personal greeting but prevents the caller from leaving a message.
• When using the
Announce only feature,
you may want to change
your outgoing message,
if the message prompts
the caller to leave a
message. The prerecorded
message changes
mute/menu
1 Press
six times.
You hear the current recording time ([ ] 1 minute,
[ ] 4 minutes, [ ] Announce only), and it is
displayed on the base.
status
ans. on/off
memo/rec
delete
automatically.
flash/set
2 Press
to change the recording time.
until the desired time appears.
to select the new recording time.
3 Press
or
• To exit the menu mode
press
if desired.
mute/menu redial/p
memory flash/set
flash/set
4 Press
A confirmation tone sounds, the system announces
the new record time.
MAnnounce only feature
The Announce only feature plays a prerecorded outgoing message or your
own personal outgoing message, but it will not allow the caller to leave a
message. To set “Announce only”, follow the steps above.
To choose between the prerecorded message or your own personal
mute/menu
greeting, press
played. Press
, then
or
when the outgoing message is
flash/set
to select the greeting of your choice.
A confirmation tone sounds. If you want to use your own greeting, you
may want to change your greeting to omit the prompt to leave a message.
Refer to “Recording a personal outgoing message” (Greeting) on page 41.
The following message is prerecorded:
“Hello, no one is available to take your call. Please call again.”
[ 46 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your Answering System
note
The message counter displays the number of messages stored in memory. If
the display flashes, then there are new messages waiting for you. The
EXAI3985 is designed to play your new messages first. After you play all
your new messages, you can then play your old messages.
• To stop playing your
messages, press
again at any time.
• When the answering
system is full,
is
displayed on the
base, and the system
announces “No
remaining time”. You
should delete some
messages so that the
system can record
new messages.
Playing your messages
1 Press
.
The system announces the number of new and old
messages while the message counter displays only
the number of new messages. The time and day that
each message was received is announced after the
message is played. The message counter will then
display the number of current stored messages.
status
ans. on/off
delete
memo/rec
(Refer to “Deleting a
message” on page 49.)
mute/menu redial/p
memory flash/set
When all new messages have been played, you hear a
beep. The system returns to standby.
2 After you have reviewed your new messages, you can
play your old messages by again pressing
. Once
you have listened to a new message, it then becomes
an old message. The old messages will be played in
the order in which they were received.
THE INTEGRATED ANSWERING DEVICE [ 47 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeating a message
1 Press
to review your messages. The number of
stored messages is announced.
status
2 After a message has played for a few seconds, press
ans. on/off
delete
memo/rec
to replay the message. If you have several
messages, press
repeatedly until you return to
the message you want to replay.
mute/menu redial/p
memory flash/set
3 Press at any time to stop reviewing messages
and return to standby. The message counter shows
the number of messages stored in memory.
To quickly scroll backwards through the messages, press and hold
.
Skipping a message
1 Press
to review your messages. The number of
messages is announced.
status
2 Press
at anytime to skip to the next message.
is pressed, the system scans forward
ans. on/off
memo/rec
Each time
delete
one message. If you have several messages, press
repeatedly to find the message you want
to play.
mute/menu redial/p
memory flash/set
3 Press
at any time to stop reviewing your
messages and return to standby. The message counter
shows the number of messages stored in memory.
To quickly scroll forward through the messages, press and hold
.
[ 48 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting a message
note
To maintain maximum record time, delete the
old messages.
status
• When you press
1 Press
to review your messages.
delete
, you are
ans. on/off
memo/rec
delete
permanently deleting
the message. Once
deleted, the message
cannot be replayed.
delete
2 Press
anytime during the message to delete
the message.
3 You hear a beep and the message is deleted.
mute/menu redial/p
memory flash/set
delete
To delete all messages, press and hold
after
reviewing your messages in the standby mode. If
there are new messages, you can not delete
all messages.
When you try to delete all messages without first listening to your new
messages, you hear several short beeps followed by an announcement
“Please playback all messages”. This protects you from accidentally erasing
messages you have not yet reviewed.
• The voice memo
function is completely
independent of the
greeting message.
Voice memo
The voice memo function allows the user to record
messages (up to 10 minutes).
status
memo/rec
1 Press and hold
.
• The voice memo
messages are recorded
as incoming messages.
ans. on/off
memo/rec
delete
You hear a beep. The message counter displays [ ].
2 Start your recording after the announcement “Record
your message after the tone”.
mute/menu redial/p
memory flash/set
memo/rec
3 When you have finished, press
or
to
stop recording. The system returns to standby.
THE INTEGRATED ANSWERING DEVICE [ 49 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a conversation
note
You can record up to a 10 minute conversation while
you are using your phone.
status
• A recorded conversation
is treated as a typical
message and will be
added to the stored
messages.
1 During a conversation from the handset, press and
ans. on/off
memo/rec
delete
memo/rec
hold
at the base. The unit begins recording
and the message counter displays [ ].
A beep, that can be heard by both parties, sounds
during recording.
• Recording conversation
will be terminated if
you press flash .
mute/menu redial/p
memory flash/set
If you receive a call waiting tone while recording a
note
flash
conversation, press
to accept the waiting call. The
original caller is put on hold.
memo/rec
2 To stop recording, press
or
.
Remote access away from home
You can operate your answering system from a remote location using any
touch-tone telephone. Use this function to check for recorded messages,
to play or delete messages, even to record a new greeting message.
tip
For your convenience a
remote operation card is
provided for you to use
while away from home
(refer to page 63).
1 Call your telephone number.
#
2 During the greeting message, press
and enter your PIN code. (See
“Setting a Personal Security Code”, page 43).
3 The answering system announces the number of messages stored in
memory. You hear “To play incoming messages, press pound two. For
help, press pound zero”. You will hear intermittent beeps.
[ 50 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
4 You may select a command from the following chart:
note
Command
# then 1
# then 2
# then 3
# then 4
# then 5
# then 6
# then 7
# then 8
# then 9
# then 0
Function
Repeat a Message
• You must enter a
command within 15
Playing your Messages
Skipping a Message
Deleting a Message
seconds of entering
command waiting mode
or the answering system
automatically hangs up
and returns to standby.
Stop Message Playback
Answering System On
Memo Record/Stop *
Greeting Message Record/Stop *
Answer System Off
• The system will only
playback messages for
four minutes and then
it returns to command
waiting mode. To
continue playing your
messages, press
#
Help Guidance
then 2 again within
15 seconds.
* For Memo Record and Greeting Message Record function, the first time
you enter the corresponding command, it starts the Recording function.
If you want to stop the recording, enter the command again.
5 After the command was finished, you hear intermittent beeps indicating
that the system is in the command waiting mode. You may enter another
command at this time from the chart above.
6 When you are finished, hang up to exit the system. The answering
system automatically returns to standby.
THE INTEGRATED ANSWERING DEVICE [ 51 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it
on remotely from any touch-tone telephone.
1 Call your telephone number.
2 Wait ten rings until the system answers. You hear a beep.
#
3 Press
and then enter your PIN code. The answering system
announces the number of messages stored in memory. You hear “To play
incoming messages, press pound two. For help, press pound zero”.
#
6
4 Press
then
to turn the answering system on.
5 Hang up the phone and subsequent calls will be answered by the system.
[ 52 ] THE INTEGRATED ANSWERING DEVICE
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
note
The digital security code is an identification code used to connect the
handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically
set. In the rare situation that you suspect another cordless telephone is
using the same security code, you can change the code.
If the handset battery
pack is completely
discharged or the battery
pack is removed, the
digital security code will
be lost. If this happens,
a new security code is set
automatically next time
the battery pack
1 Remove the handset from the base unit.
abc
jkl
def
1
4
2
5
8
3
6
int’cm/page
Press and hold
on the base.
ghi
mno
is charged.
pqrs
tuv
wxyz
2 While the handset is emitting the paging sound,
replace the handset to the base unit and continue to
int’cm/page
7
9
#
tone
oper
0
hold the
int’cm/page
for 3 seconds. Release the
. The paging tone stops. Leave the
int'cm/page
volume
mic
handset on the base for more than 3 seconds.
A new random security code is set.
ADDITIONAL INFORMATION [ 53 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Face Plate
note
To remove the Face plate
To attach the Face plate
For additional face plate
colors visit our web site:
st
at
le
s
ta
us
tu
s
on
/of
n
o
ff
f
de
m
te
u
t
d
e
e
le
te
/m
e
n
u
re
d
ia
l/p
m
me
u
m
te
o
/m
r
y
e
n
u
re
fla
d
sh
ia
/s
l/p
e
t
m
e
m
o
ry
fla
s
h
/s
e
t
flas
h
/s
et
fla
s
h/se
t
d
ef
d
ef
n
o
in
t'cm
/p
ag
e
in
t'c
m
/p
volum
ag
e
e
volum
e
m
ic
m
Headset Installation
Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert headset plug into the
headset jack. Your phone is ready for hands-free conversations.
(Headsets may be purchased by calling the Uniden Parts
Department or visiting the website. See Page 5.)
[ 54 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of
the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs
from the holes.
Maintenance
!
When slightly dirty
Wipe with a soft, dry cloth.
When very dirty
Do not use paint
thinner, benzene,
alcohol, or other
sta
tus
chemical products. Doing
so may discolor the
surface of the telephone
and damage the finish.
Wipe with a soft cloth that has been
dampened with diluted, neutral detergent.
Dry with a dry cloth.
When the charging terminals become dirty
Wipe with a dry cloth or a pencil eraser,
if necessary.
an
s.
on
/off
de
me
mo
/re
c
let
e
m
ute/
m
en
u
re
di
al
/p
m
em
or
y
fla
sh
/s
et
1
ab
2
c
de
3
f
redial
gh
4
i
5
jkl
caller id
m
no
6
pq
rs
7
ta
5
lk
tu
8
v
in
t'c
m
fla
s
w
h
9
xy
z
1
i
select
tone
2
ab
c
op
e
0
d
e
r
3
f
int'cm
/page
4
rs
gh
#
volum
jk
l
e
m
6
no
7pq
ne
mic
8
tu
v
9
w
xy
z
to
0
op
er
#
mute
pause
m
enu
m
em
ory
delete
channel
contacts
ADDITIONAL INFORMATION [ 55 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged,
please replace the battery. With normal usage, your battery should last
about one year. Please contact your place of purchase or the Uniden Parts
Department for a replacement battery. (See Page 59.)
Power Failure
During the period that the power is off, you will not be able to make
or receive calls with the telephone.
RECYCLING NICKEL-CADMIUM BATTERIES
NICKEL-CADMIUM BATTERIES MUST BE DISPOSED OF PROPERLY.
Nickel-cadmium cells are used in the battery pack. Please
take your used nickel-cadmium battery packs to a store that
recycles nickel-cadmium batteries.
Caution
• Use the specified battery pack.
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
[ 56 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The status LED won’t light
when the handset is placed
in the base unit.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Make sure the handset is properly seated in the base unit.
• Make sure the charging contacts on the handset and base unit are clean.
delete/channel
during a call to help eliminate background noise.
The audio sounds weak
and/or scratchy.
• Press
• Make sure that the base unit antenna is in a vertical position.
• Move the handset and/or base unit to a different location away from metal objects
or appliances and try again.
• Make sure that you are not too far from the base.
Can’t make or receive calls.
• Check both ends of the base unit telephone line cord.
• Make sure the AC adapter is plugged into the base unit and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Reset the digital security code (See page 53).
talk
• Make sure
is pressed.
The handset doesn’t ring or
receive a page.
• The battery pack may be weak. Charge the battery on the base unit for 15 - 20
hours.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Reset the digital security code (See page 53).
Severe noise interference
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID/CIDCW does
not display.
• The handset was picked up before the second ring.
• The call was placed through a switch board.
• Call your local telephone company to verify your Caller ID service is current.
• Make sure that the CIDCW option is set to “CIDCW on” or “CIDCW options”.
ADDITIONAL INFORMATION [ 57 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
The answering system does
not work.
Suggestion
• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
The answering system does
not answer calls.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
Messages are incomplete.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
• Remind callers to speak loud enough and clearly when leaving a message.
• Long pauses in the callers message may cause the system to stop recording.
After a power failure, the
• Record your personal outgoing message again. The default message should remain.
outgoing message is deleted.
No sound on the base unit
speaker during call
monitoring or message
playback.
• Adjust the speaker volume on the base unit.
Cannot access remote call-in • Make sure you’re using the correct PIN code.
features from another
touch-tone phone.
• Make sure that the touch-tone phone you’re using can transmit the tone for at
least two seconds. If it cannot, you may have to use another phone to access
your messages.
If you still have a problem.
• Call our customer hotline at 1-800-297-1023.
[ 58 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
note
The EXAI3985 complies with FCC Parts 15 and 68.
Operating Temperature:
0°C to +50°C (+32°F to +122°F)
If the handset is left off
of the base, the actual
Talk Mode duration will be
reduced respective to the
amount of time the
AC Adapter Information
AC Adapter part number: AD-312
Input Voltage:
Output Voltage:
120V AC 60Hz
9V DC 350 mA
handset is off the base.
Battery Information
Battery part number:
Capacity:
BT-905
600 mAH, 3.6V
Battery Use Time (per charge)
From fully charged:
Talk Mode duration
6 hours
Standby Mode duration 10 days
With normal usage, the battery should last about one year.
Replacement batteries may be purchased at your local Uniden dealer or by
contacting the Uniden Parts Department (800) 554-3988. Hours are from 7:00 a.m.
to 5:00 p.m. Central Time, Monday through Friday. We can also be reached on the
Specifications, features, and availability of optional accessories are all subject
to change without prior notice.
ADDITIONAL INFORMATION [ 59 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
the owner’s manual.
Precautions!
2. Do not dispose of the battery pack in a fire. The cell may
explode. Check the nickel-cadmium battery disposal package
insert for disposal instructions.
Before you read anything else, please observe the following:
Important Safety Instructions
Warning!
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be
toxic if swallowed.
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to
the unit, DO NOT expose this unit to rain or moisture.
1. Read and understand all instructions.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with
this product only in accordance with the instructions and
limitations specified in the owner’s manual provided for this
product.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a
dry cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
Rechargeable Nickel-Cadmium Battery Warning
•
•
This equipment contains a rechargeable nickel-cadmium battery.
Cadmium is a chemical known to the State of California to cause
cancer.
The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable nickel-cadmium battery used in
this equipment in any charger other than the one designed to
charge this battery as specified in the owner’s manual. Using
another charger may damage the battery or cause the battery to
explode.
•
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your dealer or local
power company.
8. Do not allow anything to rest on the power cord. Do not locate
this product where the cord will be damaged by persons walking
on it.
9. Do not overload wall outlets and extension cords, as this can
result in the risk of fire or electrical shock.
10.Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
11.To reduce the risk of electric shock, do not disassemble this
product. Take it to qualified service personnel when service or
repair work is required. Opening or removing covers may expose
you to dangerous voltages or other risks. Incorrect reassembly
can cause electric shock when the appliance is subsequently used.
12.Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
6. Observe proper polarity orientation between the battery pack and
battery charger.
•
•
SAVE THESE INSTRUCTIONS!
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
Warning!
Please do not attempt to unplug any appliance during an electrical
storm.
The FCC Wants You To Know
•
Uniden voluntarily participates in an RBRC® industry program to
collect and recycle nickel-cadmium batteries at the end of their
useful life, when taken out of service within the United States.
The RBRC® program provides a convenient alternative to placing
used nickel-cadmium batteries into the trash or municipal waste
stream, which is illegal in some areas.
Through the RBRC® program, Uniden makes it easy for you to
drop off the used battery at local retailers of replacement nickel-
cadmium batteries. You may also contact your local recycling
center for information on where to return the used battery. Please
call 1-800-8-BATTERY for information on Ni-Cd battery recycling
in your area. Uniden's involvement in this program is part of its
commitment to protecting our environment and conserving
natural resources.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as
detailed by the owner’s manual, could void your authority to operate
this product. The equipment cannot be used on public coin phone
service provided by the telephone company. Connection to party line
service is subject to state tariffs. (Contact the state public utility
commission, public service commission or corporation commission for
information.)
•
Range
Your new phone is designed to achieve the maximum possible range
by transmitting and receiving according to the highest specifications
set forth by the FCC. We have rated this phone to operate at a
maximum distance with the qualification that the range depends
upon the environment in which the telephone is used. Many factors
limit range, and it would be impossible to include all the variables in
our rating. The Maximum Range rating of this phone is meant to be
used as a means of comparison against other range claims.
•
RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following
the operating instructions. (Adjust only those controls that
are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will
often require extensive repair work by a qualified
technician.)
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Telephone Line Problems
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the
telephone line. Also, the telephone company may make changes in
facilities and services which may affect the operation of your unit.
However, your telephone company must give adequate notice in
writing prior to such actions to allow you time for making necessary
arrangements to continue uninterrupted service.
E. If the product has been dropped or the cabinet has been
damaged.
F. If the product exhibits a distinct change in performance.
13.Do not use the telephone to report a gas leak in the vicinity of
the leak.
Additional Battery Safety Precautions
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your
problem. If you determine that it is the cause, you must leave it
disconnected until the trouble has been corrected.
Caution! To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
1. Use only the appropriate type and size battery pack specified in
[ 60 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Interference
Telephone Line Outlets
One Year Limited Warranty
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This
interference is caused by external sources such as TV, refrigerator,
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is
NOT DEFECTIVE. If these noises continue and are too distracting,
please check around your home to see what appliances may be
causing the problem. In addition, we recommend that the base not
be plugged into a circuit that also powers a major appliance because
of the potential for interference. Be certain that the antenna on the
unit is fully extended when needed.
There are two types of phone outlets:
Important:Evidence of original purchase is required for warranty
Modular Jack
service.
Most phone equipment available now uses modular jacks. Phone
cords are fitted with a molded plastic connector which plugs into
this type of jack. If you do not have modular phone jacks, contact
your local telephone company for information about their
installation.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions
set out below.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types
of installations require a modular jack converter. This type of
installation is not difficult; however, you should contact your Uniden
telephone dealer or a telephone supply store for advice about the
proper adapter or converter for your particular situation.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty,
(E) used in any conjunction with equipment or parts or as part of
any system not manufactured by Uniden, or (F) installed or
programmed by anyone other than as detailed by the owner’s manual
for this product.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference, you
need to change to a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the
interference.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone
cords:
Caution!
•
•
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in effect,
warrantor will either, at its option, repair or replace the defective
unit and return it to you without charge for parts, service, or any
other cost (except shipping and handling) incurred by warrantor or
its representatives in connection with the performance of this
warranty. Warrantor, at its option, may replace the unit with a new
or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND
IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY
NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of
incidental or consequential damages so the above limitation or
exclusion may not apply to you.
•
Use caution when installing or modifying telephone lines.
More Than One Cordless Telephone
Applying Power to the Base
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to
select a channel that provides the clearest communication.
This phone requires an AC outlet, without a switch to interrupt
power, and the included AC adapter. To relieve strain on the DC plug
when the phone is placed on a desk or table, wrap the power cord
around the strain relief notch on the bottom of the base.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other
than your own cordless telephone unit. Consequently, any
communications using your cordless telephone may not be private.
NOTE:
Place the power cord so that it does not create a trip
hazard, or where it could become chafed and create a
fire or other electrical hazards.
Adapter Safety Features
If the AC adapter furnished with this phone has
a polarized line plug (a plug having one blade
wider than the other), this plug will fit into the
power outlet only one way. If you are unable to
insert the plug fully into the outlet, try
reversing the plug.
Installation Considerations
Selecting a Location
Before choosing a location for your new phone, there are some
important guidelines you should consider:
LEGAL REMEDIES: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This
warranty is void outside the United States of America.
Do not alter the shape of the blades of the
polarized plug!
•
The location should be close to both a phone jack and
continuous power outlet. (A continuous power outlet is an AC
outlet which does not have a switch to interrupt its power.)
Keep the base and handset away from sources of electrical noise
such as motors or fluorescent lighting.
Be sure there is sufficient space to fully extend the base
antenna.
The base can be placed on a desk or tabletop or mounted on a
standard telephone wall plate.
You should charge your new phone for 15-20 hours before
completing the installation or using the handset.
NOTE:
If you cannot plug the AC adapter
into the outlet, contact someone about replacing the
outlet.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). The Product should include all parts and
accessories originally packaged with the Product. Include evidence of
original purchase and a note describing the defect that has caused
you to return it. The Product should be shipped freight prepaid, by
traceable means, to warrantor at:
•
•
•
•
Plug the AC Adapter into a standard 120 VAC wall outlet.
Do not use an outlet controlled by a wall switch.
Use only the Uniden AC Adapter supplied with this
phone.
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Fort Worth, TX 76155
(800) 297-1023, 7 a.m. to 7 p.m. Central, Monday through Friday
ADDITIONAL INFORMATION [ 61 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
0 - 9
Using . . . . . . . . . . . . .35
Viewing . . . . . . . . . . . .33
Chain dialing . . . . . . . . . .30
Channel . . . . . . . . . . . . .31
Clock . . . . . . . . . . . . . . .42
Connection . . . . . . . . . . . .8
Making calls . . . . . . . . .23
Storing . . . . . . . . . . . .21
Menu mode . . . . . . . . . . .40
Mute . . . . . . . . . . . . . . .31
Outgoing message . . . . . . .41
3-way conferencing . . . . . .28
18 ring options . . . . . . . .15
A
Announce only feature . . . .46
Answering system
P, Q
Deleting a message . . . . .49
Playing your messages . . .47
Recording a conversation .50
Remote access . . . . . . . .50
Repeating a message . . . .48
Skipping a message . . . . .48
Turning on/off . . . . . . . .40
Area Code . . . . . . . . . . . 13
Auto Talk . . . . . . . . . . . . 12
D
Package contents . . . . . . . .5
Playing a message . . . . . . .47
Precautions . . . . . . . . . . .60
Deluxe Call Waiting Features . . 38
Dialing mode . . . . . . . . . . .9
Digital security code . . . . .53
Distinctive Ringer . . . . . . .15
R
Receiving a call . . . . . . . .17
Record time . . . . . . . . . . .46
Redialing a call . . . . . . . .19
Remote access . . . . . . . . .50
Repeating a message . . . . .48
Ringer volume . . . . . . . . .14
E, F, G, H
Earpiece volume . . . . . . . .18
Face plate . . . . . . . . . . . .54
General information . . . . . .59
Greeting . . . . . . . . . . . . .41
Headset installation . . . . .54
B
Base location . . . . . . . . . .6
Base speaker volume . . . . . 18
Battery pack
S
I, J, K, L
Important Safety
Instructions . . . . . . . . . .60
Intercom . . . . . . . . . . . . 29
Language . . . . . . . . . . . .16
Setting up
Base unit . . . . . . . . . . .8
Handset . . . . . . . . . . . .7
Skipping a message . . . . . .48
Preparing and charging . . .7
Replacement and handling 56
Beltclip . . . . . . . . . . . . .55
T, U, V, W, X, Y, Z
C
M, N, O
Transferring a call . . . . . . 30
Troubleshooting . . . . . . . .57
Voice memo . . . . . . . . . . .49
Warranty . . . . . . . . . . . . .61
Caller ID
Maintenance . . . . . . . . . .55
Making a call . . . . . . . . . .17
Memory dialing
Caller ID service . . . . . . .32
Calling . . . . . . . . . . . . 32
Call Waiting . . . . . . .18, 37
Deleting . . . . . . . . . . . .34
Setting . . . . . . . . . . . . 12
Storing . . . . . . . . . . . . 36
Editing . . . . . . . . . . . . 25
Erasing . . . . . . . . . . . .25
[ 62 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C U T
REMOTE OPERATION CARD
E X A I 3 9 8 5
Turn on the answering
system remotely
Remote access away
from home
1. Call your phone and let it
ring 10 times until you
hear a beep.
2. Press # and then enter
your PIN code.
3. Press # then 5 to stop
the announcement.
4. Press # then 6 to turn
the answering system on.
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press # and enter your PIN code.
The answering system announces
the number of messages stored
in memory and the help
guidance. The phone waits for
you to enter a command.
3. To quit, hang up the phone.
ADDITIONAL INFORMATION [ 63 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C U T
Task
Repeat a Message
Key
#
1
2
3
4
5
6
7
8
9
0
Playing your Messages
Skipping a Message
Deleting a Message
Stop Message Playback
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
#
#
#
#
#
#
#
#
#
[ 64 ] ADDITIONAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we’ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 7:00 a.m. to 7:00 p.m. CST.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|