Uniden Cordless Telephone EXA7250 User Manual
EXA 7250  
SERIES  
OWNER'S  
MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Welcome/Features  
Controls & Functions  
Terms Used in this Manual  
2
3
4
Using the Speed Dial Memory  
15  
15  
15  
15  
Using the Speed Dial Memory  
Storing Numbers in Speed Dial Memory  
Making Calls from Speed Dial Memory  
Getting Started  
5
5
5
6
7
8
9
10  
10  
10  
11  
12  
12  
13  
13  
13  
The Integrated Answering Device  
The Integrated Answering Device  
Turning the Answering System On/Off  
Setting Up Your Answering System  
Using Your Answering System  
16  
16  
17  
18  
27  
32  
37  
37  
38  
40  
41  
44  
45  
47  
48  
Installing the Phone  
A. Choose the Best Location  
B. Install the Rechargeable Battery Pack into the Handset  
C. Connect the Base Unit and Charge the Handset  
D. Mount the Base Unit on a Wall  
E. Choose the Dialing Mode  
Remote Operation  
Additional Information  
Changing the Digital Security Code  
Note on Power Sources  
General Information  
Troubleshooting  
Basics  
Using Your Phone  
Making and Receiving Calls  
Adjusting the Ringer and Earpiece Volume  
Tone Dialing Switch-over  
Traveling Out-of-Range  
Selecting a Different Channel  
Find Handset  
Liquid Damage  
Precautions & Warranty  
I.C. Notice  
Index  
Using Call Waiting  
Remote Operation Card  
RocketDial  
RocketDial  
14  
14  
14  
Storing the RocketDial  
w w w . u n i d e n . c o m  
[ 1 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations on your purchase of the Uniden cordless telephone and answering system.  
This phone is designed and engineered to exacting standards for reliability, long life, and  
outstanding performance.  
Welcome  
Features  
Note: Illustrations in this manual are used for explanation purposes. Some illustrations in  
this manual may differ from the actual unit. The color of your cordless phone may vary.  
As an Energy Star Partner, Uniden has determined that this product or product models meets the  
Energy Star guidelines for energy efficiency.  
Energy Star is a U.S. registered mark.  
• 2.4GHz Extended Range Technology  
• Integrated Telephone Answering Device  
(ITAD)  
• Trilingual Voice Prompts (English, French  
or Spanish Support)  
• 10 Number Memory Dialing  
• One touch RocketDial®  
• Last Number Redial  
• Flash and Pause  
• Tone/Pulse Dialing  
• Find Handset Locator  
• Earpiece Volume Control  
• Ringer Volume Control  
• Hearing Aid Compatible  
• 20 Channel Autoscan  
Be sure to visit our web site: www.uniden.com  
Uniden® and RocketDial® are registered trademarks of Uniden America Corporation.  
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of  
Uniden America Corporation.  
w w w . u n i d e n . c o m  
[ 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Controls & Functions  
1. Handset antenna  
1
2. Handset battery compartment  
3. Handset earpiece  
4. talk/batt low LED  
5. remote key (pages 9 and 35)  
3
4
6. vol (volume)/  
key (page 11)  
7. /tone key (page 12)  
*
10  
8. redial/pause key (pages 10 and 15)  
11 9. memory key (page 14)  
5
6
12  
10. Rocketdial key (page 14)  
11. talk/flash key (pages 10 and 13)  
12. end key (pages 10 and 11)  
13. channel key (page 13)  
2
7
8
9
14. Handset microphone  
13  
15. Handset charging contacts  
14  
15  
Retrieve TAD message  
with Handset Remote keys  
Play  
Repeat  
Skip  
Delete  
Stop  
[ 3 ] C O N T R O L S & F U N C T I O N S  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
16. Telephone line jack  
17. DC IN 9V jack  
18. Base antenna  
17 19. Base speaker  
16  
20.  
(repeat/rewind) key (page 28)  
21. memo rec (record) key (page 31)  
22. menu/clock key (page 18 and 19)  
23. ringer key (page 26)  
24. Base charging contacts  
25. charge in use LED  
18  
26.  
27.  
28.  
(play/stop) key (pages 26 and 27)  
(skip/fast forward) key (page 29)  
(delete) key (page 30)  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
19  
29. greeting key (page 25)  
30. answer on/off key (page 17)  
31. set key (page 18)  
32. find hs (handset) key (pages 13 and 37)  
33.  
20  
21  
22  
23  
24  
/
/volume/select keys (page 18 and 26)  
34. mic (microphone)  
Terms Used in this Manual  
• Standby Mode -The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has  
not been pressed and there is no dial tone.  
• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone.  
• RocketDial - One touch speed dial  
w w w . u n i d e n . c o m  
C O N T R O L S & F U N C T I O N S [ 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the Phone  
note  
Do the following steps:  
A. Choose the Best Location  
B. Install the Rechargeable Battery Pack into the Handset  
C. Connect the Base Unit and Charge the Handset  
D. Mount the Base Unit on a Wall  
If your home has  
specially wired alarm  
equipment connected to  
the telephone line, be  
sure that installing the  
system does not disable  
your alarm equipment.  
E. Choose the Dialing Mode  
A. Choose the Best Location  
When choosing a location for your new phone, here are some important guidelines you should  
consider:  
If you have questions  
about what will disable  
your alarm equipment,  
contact your telephone  
company or a qualified  
installer.  
Avoid heat sources, such as radiators,  
air ducts, and sunlight  
Avoid noise sources such as a window by  
a street with heavy traffic  
Avoid television sets and other  
electronic equipment  
Avoid microwave ovens  
Avoid excessive moisture,  
extremely low temperatures, dust,  
mechanical vibration, or shock  
Choose a central location  
Avoid personal computers  
Avoid other cordless telephones  
• The location should be close to both a phone jack and a continuous power outlet (one  
which is not connected to a switch).  
• The base and handset should be kept away from sources of electrical noise such as motors,  
microwave ovens, and fluorescent lighting.  
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.  
• There should be enough space to fully extend the antenna.  
[ 5 ] G E T T I N G S T A R T E D  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
B. Install the Rechargeable Battery Pack into the Handset  
The handset is powered by a rechargeable battery pack. The  
battery recharges automatically when the handset is placed in  
the base unit.  
!
•Use only the Uniden  
(BT-905)  
rechargeable battery  
pack supplied with  
your cordless  
1) Press down on the handset battery case cover (use the  
finger indention for a better grip) and slide the cover  
downward to remove.  
2) Plug the battery pack connector (red & black wires) into the  
jack inside the battery compartment.  
telephone.  
(The connector notches fit into the grooves of the jack only  
one way.) Match the wire colors to the polarity label in the  
battery compartment, connect the battery and listen for a  
click to insure connection.  
3) Make sure you have a good connection by slightly pulling on  
the battery wires. If the connection is secure, the battery  
jack will remain in place.  
•Replacement batteries  
are also available  
through the Uniden  
Parts Department at  
(800) 554-3988,  
4) Place the battery case cover back on the handset by sliding  
it upwards until it clicks into place.  
Monday through Friday  
from 8:00 a.m. to 5:00  
p.m. or online at  
www.uniden.com  
w w w . u n i d e n . c o m  
G E T T I N G S T A R T E D [ 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
C. Connect the Base Unit and Charge the  
Handset  
1) Connect the AC adapter to the DC IN 9V jack and to  
!
a standard 120V AC wall outlet.  
•Use only the supplied  
AD-314 AC adapter.  
Do not use any other  
AC adapter.  
2) Place the handset in the base unit with the keypad  
facing forward.  
3) Make sure the charge in use LED illuminates.  
If the LED does not illuminate, check to see that the AC adapter  
is plugged in and the handset makes good contact with the base  
charging contacts.  
•Do not place the power  
cord where it creates a  
trip hazard or where it  
could become chafed  
and create a fire or  
electrical hazard.  
•Connect the AC adapter to a continuous power supply.  
•Place the base unit close to the AC outlet so that you can  
unplug the AC adapter easily.  
4) Charge your handset at least 15-20 hours before plugging into  
the phone line.  
5) Once the handset battery pack is fully charged,  
connect the telephone line cord to the TEL LINE  
jack and a telephone outlet.If your telephone  
outlet isn't modular, contact your telephone  
company for assistance.  
[ 7 ] G E T T I N G S T A R T E D  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
D. Mount the Base Unit on a Wall  
Standard wall plate mounting  
This phone can be mounted on any standard wall plate.  
1) Locate the base unit on the wall  
mount adapter as shown and slide  
the wall mount adapter into the  
notches on the base bottom.  
1
2) Plug the AC adapter to the DC IN 9V  
2
jack.  
5
3) Route the AC adapter cord through  
the molded wiring channel as shown.  
7
6
4) Plug the AC adapter into a standard  
120V AC wall outlet.  
7
5) Plug the telephone line cord into the  
TEL LINE jack. Route the cord  
through the molded wiring channel  
as shown.  
3
To remove, push up  
a tab on the wall  
mount adapter as  
shown.  
4
6) Plug the telephone line cord into the  
telephone outlet.  
7) Align the mounting slots on the base  
with the mounting posts on the wall.  
Then push in and down until the  
phone is firmly seated.  
w w w . u n i d e n . c o m  
G E T T I N G S T A R T E D [ 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Direct wall mounting  
If you don't have a standard wall plate, you can mount your phone  
directly to the wall. Before doing this, consider the following:  
• Avoid electrical cables, pipes, or other items behind the  
mounting location that could cause a hazard when inserting  
screws into the wall.  
• Try to mount your phone within 5 feet of a working phone jack  
to avoid excessive cord lengths.  
• Make sure the wall material is capable of supporting the weight  
of the base and handset.  
• Use #10 screws (minimum length of 1-3/8 inches) with  
anchoring devices suitable for the wall material where the base  
unit will be placed.  
note  
•If you are not sure of  
your dialing system,  
make a trial call. If the  
call connects, leave  
the setting as is.  
Otherwise, set for  
pulse dialing.  
1) Insert two mounting screws into the wall, (with their  
appropriate anchoring device), 3-15/16 inches apart. Allow  
about 1/8 of an inch between the wall and screw heads for  
mounting the phone.  
2) Refer to steps 1 through 8 on page 8 to mount the telephone.  
•If your phone system  
requires pulse dialing  
and you need to send  
DTMF tones during a  
call, you can  
E. Choose the Dialing Mode  
Most phone systems use tone dialing. However some phone systems (such as in rural areas)  
still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default  
setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to  
change the dialing mode:  
temporarily switch  
over to tone dialing.  
(Refer to “Tone Dialing  
Switch-over” on  
1) In standby mode, press and hold the remote key until you hear a confirmation tone.  
2) Press the # key to set your phone for pulse dialing. You will hear a confirmation tone.  
page 12).  
[ 9 ] G E T T I N G S T A R T E D  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Your Phone  
Making and Receiving Calls  
Making a call  
1) Remove the handset from the base.  
2) Press the talk/flash key. The talk/batt low LED flashes and turns on.  
3) Listen for the dial tone.  
4) Dial the number.  
Receiving a call  
If the handset is in the base, simply remove the handset from the base. AutoTalk will  
automatically answer the call.  
If the handset is off the base, press the talk/flash key or any number key.  
Hanging up  
Press the end key or return the handset to the base.  
Redialing the last dialed number  
1) Remove the handset from the base.  
2) Press the talk/flash key. The talk/batt low LED flashes and turns on.  
3) Listen for the dial tone.  
4) Press the redial/pause key.  
w w w . u n i d e n . c o m  
B A S I C S [ 1 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Adjusting the Ringer and Earpiece Volume  
Ringer tone and volume  
When the phone is in standby mode, press the vol/  
key  
repeatedly to listen to the four ringer tones and volume  
combinations. The last ringer tone heard will be selected as the  
phone’s ring tone setting.  
Earpiece volume  
The handset earpiece volume settings can only be adjusted during  
a call. Press the vol/  
key repeatedly to scroll between and  
select the volume level that works best for you. When you hang  
up, the phone keeps the volume setting.  
Temporarily Mute Ringer  
If the handset is off the base, simply press the end key to temporarily mute the incoming  
ring. The ringer will sound with the next incoming call.  
[ 1 1 ] B A S I C S  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Tone Dialing Switch-over  
If your telephone company requires pulse dialing, you can switch-  
over to tone dialing after the call connects. This feature is useful  
when you need tone dialing to use any automated menu systems,  
such as telephone bank tellers, telephone prescription refills,  
customer support menus, etc.  
If your phone is set to pulse dialing mode, make your call  
normally. Once your call connects, press the /tone key. Any  
*
digits you enter from then on will be sent as tone digits. When  
this particular call ends, the phone automatically returns to pulse  
dialing mode.  
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your base unit,  
noise increases. If you pass the range limits of the base unit, your call will terminate within  
one minute.  
w w w . u n i d e n . c o m  
B A S I C S [ 1 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually change the phone´s  
channel for clear operation. While using your phone, press the channel key. The talk/batt  
low LED flashes, indicating the phone is changing to another channel. For more information  
on interference, refer to "Precautions" on page 46.  
note  
TM  
The UltraClear Plus  
true compander circuitry  
virtually eliminates  
background noise. This  
innovative technology,  
together with 20  
Find Handset  
To locate the handset (while it's off the base), press the  
find hs key on the base. The handset beeps for 60  
seconds.  
Paging is canceled when pressing any handset key, the  
find hs key on the base or the handset is returned to the  
base.  
Paging is also canceled when the phone receives an  
incoming call.  
different channels,  
provides you with the  
best possible reception  
during all your  
conversations.  
Using Call Waiting  
If you have Call Waiting service, you can receive calls while on the line.  
1) If you have "Call Waiting" service and a call comes in while you  
are on the phone, you will hear a call waiting tone.  
2) Press the talk/flash key to accept the waiting call. After a  
short pause, you will hear the new caller.  
3) To return to the original caller, press the talk/flash key again.  
You must subscribe through your local telephone company to  
receive Call Waiting service.  
[ 1 3 ] B A S I C S  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
RocketDial  
RocketDial is a one-touch speed dial key. Store your most important  
or most frequently called number as your RocketDial number. Then,  
simply press the Rocketdial key, and your phone will automatically  
dial the number.  
note  
If RocketDial or Speed  
Dial Memory does not  
have a stored number,  
an error tone will sound  
and the phone will not  
dial.  
Storing the RocketDial  
1) With the phone in standby mode, press the memory key.  
The talk/batt low LED flashes.  
2) Enter the phone number, up to 20 digits.  
3) Press the memory key again.  
4) To actually store a number, press the Rocketdial key. A tone indicates that the number is  
stored. If there is a number already stored, the new number will be overwritten without  
warning.  
w w w . u n i d e n . c o m  
R O C K E T D I A L [ 1 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using the Speed Dial Memory  
Storing Numbers in Speed Dial Memory  
The speed dial memory allows you to store up to 10 numbers in the handset. You can dial  
these numbers with just a few key presses.  
The speed dial memory is not limited to phone numbers. You can store any number (up to 20  
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.  
For example, you can save your bank account number to speed dial memory. When you call  
your bank's telephone teller service and are prompted to enter your account number, simply  
press the memory key and the speed dial number where you stored your account number.  
Memory Dialing allows you to dial a number using just a few key presses.  
Your cordless phone stores up to 10 numbers in the handset.  
1) With the phone in standby mode, press the memory key. The talk/batt low LED flashes.  
2) Use the keypad to enter the phone number; each number can be up to 20 digits.  
3) If you need the phone to pause during the dialing sequence, press the redial/pause key  
to insert a two-second delay between the numbers. You can enter  
multiple pauses to increase the delay. Each pause counts as a digit.  
4) Press the memory key again.  
5) To store this number as one of the ten speed dial numbers, enter a digit from 0 to 9. If  
there is already a number in that speed dial setting, it will overwrite the previously stored  
number without warning. You will hear a confirmation tone indicates that the number has  
been stored.  
note  
When storing numbers into memory, if the handset is idle (i.e,. no key is pressed) for  
more than 30 seconds, it will beep rapidly, and the phone will return to standby mode.  
To exit the memory  
function without  
dialing, press the end  
key. The handset returns  
to standby.  
Making Calls from Speed Dial Memory  
1) With the phone in standby mode, press the talk/flash key. Then press the memory key.  
2) Enter the memory location on the keypad. The stored number automatically dials.  
[ 1 5 ] U S I N G T H E S P E E D D I A L M E M O R Y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
           
The Integrated Answering Device  
The cordless phone has a built-in answering system that answers and records incoming calls.  
You can also use your answering system to record a conversation, leave a voice memo  
message, or to announce a special outgoing message to callers when you're away from your  
phone.  
Features  
• Digital Tapeless Recording  
• Retrieve Messages Using Handset  
• Up to 13 Minutes of Recording Time  
• Call Screening  
• Personal or Pre-recorded Outgoing  
Message  
• Time and Day Announcement  
• Remote Message Retrieval  
• Toll Saver  
• Conversation Recording  
• Voice Memo  
• Selectable Ringer Options  
(High, Low or Off)  
• Voice Prompts  
(English, French or Spanish)  
Digital Tapeless Recording allows you to quickly review, save, or delete any messages you  
choose. You will never have to worry about a tape wearing out, jamming, or resetting  
improperly.  
The Integrated Answering System is easy and convenient to use, but please read through all  
of the instructions carefully.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 1 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Turning the Answering System On/Off  
1) To turn the answering system on, press the answer  
on/off key. The system will announce "Answering  
system is on." The current greeting message will  
be played, and you hear a confirmation tone. The  
message counter displays the number of messages  
stored in memory. If the display flashes, there are  
new messages waiting for you.  
2) To turn the answering system off, press the answer  
on/off key again. After the announcement  
“Answering system is off,” the message counter  
display will no longer be illuminated. To turn the  
answering system back on, press the answer on/  
off key.  
[ 1 7 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting Up Your Answering System  
note  
Answering System Settings  
To set the following six functions you must enter the menu mode.  
•For your convenience,  
voice prompts will  
guide you through the  
menu mode.  
• To scroll through the menu options, repeatedly press  
menu/clock  
the menu/clock key in standby mode. The system  
returns to standby after the last menu option. You  
hear a confirmation tone to indicate standby mode.  
• If any of the following occurs during menu setup, the  
system returns to standby; you will have to start over  
with the procedure you were performing.  
"Time"  
menu/clock  
"Security Code"  
menu/clock  
•After the setting, press  
the  
(play/stop)  
key to exit the menu  
mode, or the menu/  
clock key to move to  
the next menu option.  
"Ring Time"  
menu/clock  
-The talk/flash key is pressed  
"Record Time"  
-The  
(play/stop) key is pressed  
menu/clock  
-10 seconds elapse without a key press  
-An incoming call is received  
"Message Alert"  
• If the system remains idle for about five seconds after  
the announcement, the system returns to standby.  
menu/clock  
"Language"  
Once the  
or /volume/select key is pressed, the  
menu/clock  
idle time is extended to 10 seconds.  
Return to standby  
with tone sounds.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 1 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting the Time  
The clock on the cordless phone’s answering system starts when power is supplied to the  
base. Follow these steps to set the clock to the correct time.  
note  
1) With the phone in standby mode, press the menu/  
•Normally, the system  
will return to standby  
if it remains idle for 10  
clock key.  
The system announces “Time,” the current time and the  
guidance for setting the time.  
seconds after the  
/volume/select  
key is pressed. For  
setting the time,  
or  
2) Press the  
or /volume/select key until the correct  
day is announced. The numbers [ ] through [ ] are  
displayed on the base.  
however, the idle time  
is extended to two  
minutes.  
3) Press the set key to select the day.  
•Press and hold the  
or  
/volume/select  
4) Press the  
the correct hour setting. The numbers [ ] through  
] are displayed on the base.  
or /volume/select key until you hear  
key to quickly scroll  
through the numbers  
on the display.  
[
5) Press the set key to select the hour.  
6) Press the  
or /volume/select key until you hear  
the correct minute setting.  
The numbers [ ] through [ ] are displayed on the  
base.  
7)Press the set key to select the minute.  
[ 1 9 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8) Press the  
or /volume/select key until you hear the correct AM or PM setting.  
The message counter displays [ ] or [ ].  
9) Press the set key to select the AM/PM setting.  
You hear a confirmation tone. Then the announcement "Time" and the day and time are  
announced for your review. After a few seconds, the system announces “To set security code,  
press menu again.”  
Setting a Personal Security Code (PIN)  
To play your messages from a remote location, you need to enter a two-digit Personal  
Identification Number (PIN) code (01-99). To select a PIN, perform the following steps:  
1) With the phone in standby mode, press the menu/clock key twice.  
note  
The system announces "Security code," and the current PIN code is announced as it is  
displayed on the base. Then the system announces the guidance for setting the PIN code.  
The PIN code is set to  
"80" when you purchase  
the cordless phone.  
2) Press the  
or /volume/select key until the desired number appears.  
3) Press the set key to select the PIN code. You hear a confirmation tone, then the  
announcement "Security code" followed by the new PIN code. After a few seconds, the  
system announces “To set ring time, press menu again.”  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 2 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting the Ring Time  
The ring time setting allows you to set the number of rings the caller hears before your  
answering system plays the outgoing message. You can set the ring time to answer after two,  
four, or six rings. Setting [  
] (Toll Saver), the answering system picks up after two rings if  
you have new messages, and after four rings if there are none. This way, if you make a long  
distance call to check your messages, you can hang up after the second ring to avoid billing  
charges.  
1) With the phone in standby mode, press the menu/clock key three times.  
You hear "Ring time" and the current ring time ([ ] 2, [ ] 4, [ ] 6, [  
] Toll saver),  
and it is displayed on the base. Then you hear the guidance for setting the ring time.  
2) Press the  
or /volume/select key until the desired ring time appears.  
3) Press the set key to select the new ring time. You hear a confirmation tone, then the  
announcement "Ring time" followed by the new ring time. After a few seconds, the system  
announces "To set record time, press menu again."  
[ 2 1 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting the Message Record Time  
You have three record time options. The options "One minute" or "Four minutes" set the  
duration for recording the incoming messages. "Announce only" answers the call with the  
preset greeting or your personal greeting but prevents the caller from leaving a message.  
note  
After setting the  
1) With the phone in standby mode, press the menu/clock key four times.  
Announce only feature,  
you may want to change  
your outgoing message  
not to prompt the caller  
to leave a message.  
However, the  
You hear "Record time" and the current recording time ([ ] one minute, [ ] four  
minutes, [ ] Announce only, No recording), and it is displayed on the base.  
Then you hear the guidance for setting the record time.  
2) Press the  
or /volume/select key until the desired time appears.  
prerecorded message  
changes automatically.  
3) Press the set key to select the new recording time. You hear a confirmation tone, then the  
announcement "Record time" followed by the new recording time. After a few seconds, the  
system announces "To set message alert, press menu again."  
▼ Announce only feature  
The announce only feature plays a prerecorded outgoing message, and will not allow the  
caller to leave a message. To set "Announce only," follow the steps above.  
Your system comes with a prerecorded announce only greeting; “Hello, no one is available to  
take your call. Please call again.“  
To scroll between the prerecorded message or your own personal greeting, press the greeting  
key when the outgoing message is played. If you want to use your own greeting or want to  
omit the prompt "to leave a message" from your greeting, refer to "Recording a personal  
outgoing message (Greeting)" on page 25.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 2 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting the Message Alert Tone  
Message Alert feature lets you know you have new messages by sounding a short beeping  
tone. If you set the Message Alert to on when a new message is received, the alert tone will  
sound every 15 seconds.  
1) With the phone in standby mode, press the menu/clock key five times.  
You hear "Message alert" and the current setting ([  
] Off or [  
] On), and it is  
displayed on the base. Then you hear the guidance for setting the Message Alert Tone.  
2) Press the  
or /volume/select key to make your selection.  
3) Press the set key to select the new setting. You hear a confirmation tone, then the  
announcement "Message alert" followed by the current setting you have selected. After a  
few seconds, the system announces "To set language, press menu again."  
When the first new message is received, the alert tone will begin to sound.  
You can also turn off the Message Alert tone by pressing any key on the base unit. The tone  
will deactivate until another new message is received.  
Turning Message Alert tone off when you’re away from your phone:  
When all new messages are played back using the remote playback feature (see page 32,)  
the Message Alert tone will automatically deactivate. The tone will not deactivate until all  
messages are played back.  
[ 2 3 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting the Language  
The answering system voice announcements can be heard in English, French or Spanish.  
To choose the language of the answering system voice announcements:  
1) With the phone in standby mode, press the menu/clock key six times.  
You hear the announcement "Language, English" followed by the voice prompts for setting  
the language. The current setting ([ ], [ ] or [ ]) appears on the base.  
2) Press the  
or /volume/select key to select the desired language.  
3) Press the set key. A confirmation tone is heard along with the setting in the language  
selected.  
Setting Your Outgoing Message (Greeting)  
When you receive a call, the answering system automatically plays either a preset message or  
your own greeting.  
▼Preset message  
The following message is prerecorded:  
"Hello, no one is available to take your call. Please leave a message after the tone."  
See “Selecting the Message Record Time” on page 22. on how to set the announce only  
feature.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 2 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
▼Recording a personal outgoing message (Greeting)  
1) Press and hold the greeting key in standby mode.  
note  
You hear the announcement "Record greeting" and a confirmation tone.  
[
] flashes on the message counter.  
•Your greeting must be  
more than 2 seconds  
and less than 30  
2) Start recording your message. You have 30 seconds, and the message counter starts to  
count down [ ] to [ ] every second.  
seconds to record.  
3) When you are finished recording your greeting, press the greeting,  
(play/stop) or set  
•Position yourself as  
near to the base’s  
microphone as possible  
and speak clearly when  
recording your  
key. You hear a confirmation tone, and then your greeting plays back for you.  
▼Choosing between the two outgoing messages  
With the phone in standby mode, press the greeting key. Then press the greeting key again  
while the outgoing message is played. This switches between the prerecorded greeting and  
the personal greeting. After finishing playing back the message, a confirmation tone is  
heard.  
outgoing message.  
To delete the personal Greeting, press the  
(delete) key during the announcement and  
the system announces "Greeting has been deleted."  
[ 2 5 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting the Base Ringer Volume  
You will hear three ringer options. One allows you to turn the ringer off. The other two are volume  
levels. You can change the ringer volume while in standby mode or the incoming call is ringing.  
note  
1) Press the ringer key.  
You hear the ringer at the current volume level ([  
]
Although you have set  
the base ringer to off,  
you will still hear the  
ringer from the handset  
on the base if its ringer  
is on.  
high, [  
] low, [  
] off) (if you set the base ringer  
volume to off, "Ringer off " is announced) and it is  
displayed on the base.  
2) Press the ringer key repeatedly until the desired ringer  
option appears.  
3) The system displays the new ringer volume.  
Temporarily Mute the Base Ringer and Call Screen  
Press the  
(play/stop) key to temporarily mute the incoming ring and call screen. The  
ringer will sound with the next incoming call. To turn the ringer back on for this call, press  
the ringer key. To hear the answering machine and screen this call, press the  
or /volume/select key.  
Adjusting the Speaker Volume Level  
You can adjust the volume of the base speaker by pressing the  
or /volume/select key  
on the base. Press the /volume/select key for louder or the /volume/select key for  
softer while the base speaker is being used except for menu mode. The numbers [ ] -[  
]
are displayed on the base indicating the volume levels. [ ] being the softest and [ ] being  
the loudest.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 2 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Your Answering System  
The message counter displays the number of messages stored in memory. If the display  
flashes, new messages are waiting for you. The flashing number represents the number of new  
messages, not total messages. The cordless phone plays the new messages first; after all the  
new messages are played, you can play the old messages.  
When the answering system is full, [  
] is displayed on the base, and the system  
announces "No remaining time." You should delete some messages so that the system can  
record new messages. (Refer to “Deleting a Message” on page 30.)  
Playing Your Messages  
1) With the phone in standby mode, press the  
(play/  
hint  
stop) key. The system announces the number of new  
and old messages. The LED displays the number of new  
messages, and the number flashes. The day and time  
that each message was received is announced after the  
message is played. The message counter displays the  
number of current messages stored.  
To stop playing your  
messages, press the  
(play/stop) key again at  
any time.  
2) When all new messages have been played, you hear a  
confirmation tone and an announcement “End of  
messages.” The system returns to standby.  
3) After you have reviewed your new messages, you can  
play your old messages by pressing the  
(play/stop)  
key again. Once you have listened to a new message, it  
becomes an old message. The old messages will be  
played in the order in which they were received.  
[ 2 7 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Reviewing Messages using Handset  
1) With the phone in standby mode, press the remote key on the handset. The talk/batt low  
LED flashes and turns on. The answering system announces the current time and the  
number of messages stored in the memory.  
2) You hear "To play incoming message, press two. For help, press zero."  
You hear intermittent beeps.  
3) Press the  
/2 key and you can review your messages. When you are finished, hang up to  
exit the system.  
Repeating a Message  
1) With the phone in standby mode, press the  
The number of stored messages are announced.  
(play/stop) key to review your messages.  
2) To repeat the current message, press the  
beginning the message. To quickly scroll backwards through a message, press and  
hold the (repeat/rew) key. To repeat the previous message, press the (repeat/rew)  
key within a few seconds (about 4 seconds during remote operation) after a message  
begins playing. If you have several messages, press the (repeat/rew) key repeatedly  
(repeat/rew) key after a few seconds of  
until you return to the message you want to replay. If the current message is the first new  
message, the system plays back from the beginning of the current message (it does not go  
back into the old message group).  
3) Press the  
standby.  
(play/stop) key at any time to stop reviewing messages and return to  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 2 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Skipping a Message  
1) With the phone in standby mode, press the  
The number of messages is announced.  
(play/stop) key to review your messages.  
2) Press the  
(skip/ff) key at anytime to skip to the next message.  
Each time the  
(skip/ff) key is pressed, the system scans forward one message.  
If you have several messages, press the  
(skip/ff) key repeatedly to find the message  
you want to play. To quickly scroll forward through a message, press and hold the  
(skip/ff) key.  
3) Press the  
(play/stop) key at any time to stop reviewing your messages and return to  
standby. The message counter shows the number of messages stored in memory.  
[ 2 9 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Deleting a Message  
To maintain maximum record time, delete the old  
messages. When you press the (delete) key, you are  
permanently deleting the message. Once deleted, the  
message cannot be replayed.  
1) Press the  
(play/stop) key to review your messages.  
(delete) key anytime during the message  
2) Press the  
to delete.  
3) You hear a confirmation tone and the message is  
deleted.  
You can also delete all the messages.  
1) With the phone in standby mode, press the  
key. You hear an announcement “To delete all  
messages, press delete again.”  
(delete)  
2) Press the  
(delete) key again.  
You hear a confirmation tone and [ ] is displayed on  
the base. All the messages are deleted.  
When you try to delete all messages without first listening to your new messages, you hear  
several short beeps followed by an announcement “Please playback all messages.” This  
protects you from accidentally erasing messages you have not yet reviewed.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 3 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Voice Memo  
The voice memo function allows you to record messages as  
shorts as two seconds and as long as four minutes.  
note  
1) With the phone in standby mode, press and hold the  
memo rec key.  
•The voice memo  
recorded is completely  
independent of the  
greeting message.  
You hear an announcement “Record memo message”  
and a tone. [  
] flashes on the message counter.  
•The voice memo  
2) Start your recording.  
messages are recorded  
as incoming messages.  
3) When you have finished, press the  
(play/stop),  
•When the answering  
memo rec or set key to stop recording. You hear a  
system is full, [  
appears on the  
]
confirmation tone, and the system returns to standby.  
message counter, and  
recording is  
Recording a Conversation  
terminated.  
•A recorded  
You can record up to 10 minutes of conversation while you are using your phone. Any  
conversation that lasts less than two seconds will not be recorded.  
conversation is treated  
as a incoming message  
and will be added to  
the stored messages.  
1) During a conversation from the handset, press and hold the memo rec key.  
The unit begins recording with a confirmation tone and [  
message counter.  
] flashes on the  
•When recording a  
conversation, all  
dialing features except  
for using call waiting  
(see page 13) are  
disabled.  
A beep that can be heard by both parties sounds during recording.  
If you receive a call waiting tone while recording a conversation, press the talk/flash  
key to accept the waiting call. The recording feature continues recording the new call.  
The original call is put on hold.  
Stop recording if you  
need to enable any  
other handset keys.  
2) To stop recording, press the  
You hear a confirmation tone.  
(play/stop) or memo rec key.  
[ 3 1 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Remote Operation  
You can operate your answering system from a remote location (when you are away from  
home, or from another room using a handset). Use this function to check for recorded  
messages, to play or delete message. When using any touch-tone telephone, you can even  
record a new greeting message.  
tip  
For your convenience  
remote operation cards  
are provided for you to  
use while away from  
home (located in the  
back of this manual).  
Remote Access away from Home  
You can operate your answering system from a remote location using any touch-tone  
telephone.  
1) Call your telephone number.  
2) During the greeting message, press 0 and enter your PIN code (see page 20).  
note  
3) The answering system announces the current time and the number of messages stored in  
memory. Then you hear "To play incoming messages, press zero two.  
For help, press one zero."  
Once you enter the  
remote access menu,  
you must enter a  
command within 15  
seconds, or the  
answering system  
4) You may continue to listen to the voice prompts, or you may select a command from the  
following chart:  
automatically hangs up  
and returns to standby.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 3 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Command  
Function  
Repeat a Message  
Command  
Function  
Answering System On  
Memo Record/Stop*  
Greeting Message Record/Stop*  
Answering System Off  
Voice Prompts  
0 then 1  
0 then 2  
0 then 3  
0 then 4  
0 then 5  
0 then 6  
0 then 7  
0 then 8  
0 then 9  
1 then 0  
Play Incoming Messages  
Skip a Message  
Delete a Message  
Stop Operation  
*For Memo Record and Greeting Message Record function, the first time you enter the  
corresponding command, it starts the Recording function. If you want to stop the  
recording, enter the command again.  
5) After all of the voice prompts have been played, you hear intermittent beeps indicating  
that the system is in the command waiting mode. You may enter another command at this  
time from the chart.  
6) When you are finished, hang up to exit the system. The answering system automatically  
returns to standby.  
[ 3 3 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn on the Answering System Remotely  
If you have forgotten to turn on your answering system, you can turn it on remotely from  
any touch-tone telephone.  
1) Call your telephone number.  
2) Wait ten rings until the system answers. You hear intermittent beeps.  
3) Press 0 and then enter your PIN code. The answering system announces the number of  
messages stored in memory. You hear "To play incoming messages, press zero two. For  
help, press one zero."  
4) Press 0 then 6 to turn the answering system on. You hear the outgoing message and a  
confirmation tone.  
5) Hang up the phone; subsequent calls will be answered by the system.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 3 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Access with the Handset  
You can operate your answering system from another room using a handset.  
•If you press the end key before the answering system answers, the phone will return to  
standby.  
•If the answering system does not answer within five seconds, you hear beeps and the  
phone will return to standby.  
•The base's keypad is disabled during remote operation.  
•If you receive a call, the remote operation is canceled.  
•During the remote operation [--] appears on the base.  
•If you have new messages and old messages, only the new messages will be played. After  
you have reviewed your new messages, you can play your old messages by pressing the  
/2 key again.  
1) With the phone in standby mode, press the remote key on the handset. The talk/batt low  
LED flashes and turns on. The answering system announces the current time and the  
number of messages stored in the memory.  
2) You hear "To play incoming message, press two. For help, press zero."  
You hear intermittent beeps.  
3) Enter a command within 15 seconds. You may select a command from the following chart:  
Command  
Function  
Command  
Function  
Repeat a Message  
Stop Operation  
/1  
/5  
6
/2 Play Incoming Messages  
Answering System On  
Answering System Off  
Voice Prompts  
Skip a Message  
9
/3  
/4  
Delete a Message  
0
[ 3 5 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4) After the command has finished, you hear intermittent beeps indicating that the system is  
in the command waiting mode. You may enter another command at this time from the  
chart on the previous page.  
5) When you are finished, hang up to exit the system. The answering system automatically  
returns to standby.  
w w w . u n i d e n . c o m  
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 3 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Digital Security Code  
To protect you against misbilled calls which might result from your phone being activated by  
other equipment, the cordless phone provides AutoSecureTM (which electrically locks your  
phone when the handset is on the base) and Random CodeTM digital security which  
automatically selects one of over 262,000 digital security codes for the handset and base.  
If the handset battery pack is completely discharged or the battery pack is removed, the  
digital security code will be lost. If this happens, a new security code is set automatically  
the next time the battery pack is charged.  
In the rare situation that you suspect another cordless telephone is using the same security  
code, you can change the code.  
1) Remove the handset from the base unit. Press and hold the find hs key on the base.  
2) While holding the find hs key, place the handset on the base unit and leave the handset  
on the base for more than 3 seconds. A new random security code is set.  
[ 3 7 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Note on Power Sources  
Low battery alert  
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order  
to save power.  
If the phone is in use, the talk/batt low LED flashes and the handset beeps.  
Complete your conversation as quickly as possible and return the handset to the base unit for charging.  
• Dial mode setting, last number dialed and numbers stored in memory locations (including RocketDial), are retained for up  
to one minute while you replace the battery pack.  
• Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum  
performance, be sure to return the handset to the base unit after a telephone call.  
Battery replacement and handling  
When the operating time becomes short even after a battery is recharged, please replace the battery.  
With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden  
Parts Department for a replacement battery.  
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden  
battery model and Uniden adapter model specifically designated for this product.  
Caution  
Power Failure  
• Use only the specified Uniden battery pack (BT-905).  
During the period that the power is off, you will not  
• Do not remove the battery from the handset to charge it.  
be able to make or receive calls with the telephone.  
• Never throw the battery into a fire, disassemble it, or heat it.  
• Do not remove or damage the battery casing.  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 3 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Cleaning the battery charging contacts  
To maintain a good charge, clean the charging contacts on the handset once  
a month.  
Dampen a cloth with plain water. Gently rub the damp cloth over the  
charging contacts until all visible dirt is removed. Dry the contacts  
thoroughly before returning the handset to the base  
Caution  
Do not use paint thinner, benzene,  
alcohol, or other chemical products.  
Doing so may discolor the surface of  
the telephone and damage the finish.  
[ 3 9 ] A D D I T I O N A L I N F O R M A T I O N  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
General Information  
The phone complies with FCC Parts 15 and 68.  
Operating temperature: -10°C to +50°C (+14°F to +122°F)  
AC Adapter Information  
AC Adapter part number: AD-314  
Input Voltage:  
Output Voltage:  
120V AC 60Hz  
9V AC 350 mA  
Battery Information  
Battery part number:  
Capacity:  
BT-905  
600 mAh, 3.6V  
Frequency  
924.516925 - 926.704425 MHz  
2,405.155942 - 2,411.718441 MHz  
•To avoid damage to the phone use only Uniden AD-314 and BT-905 with your phone.  
•If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of  
time the handset is off the base.  
Recharge your phone on a regular basis by returning the handset to the base after each phone call.  
When the operating time becomes short, even after the battery is recharged, please replace the battery.  
With normal usage, the battery should last about one year.  
A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting the Uniden  
Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. We  
can also be reached on the web at www.uniden.com. Specifications, features, and availability of optional accessories  
are all subject to change without prior notice.  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 4 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Troubleshooting  
If your phone is not performing to your expectations, please try these simple steps first.  
Symptom  
Suggestion  
The charge in use LED won't  
• Make sure the AC adapter is plugged into the base and wall outlet.  
illuminate when the handset is • Make sure the handset is properly seated in the base.  
placed in the base.  
• Make sure the charging contacts on the handset are clean.  
The audio sounds weak and/or  
scratchy.  
• Move the handset and/or base away from metal objects or appliances and try again.  
• Press the channel key in the Talk mode to help eliminate background noise.  
• Make sure that the handset is not too far from the base.  
Can't make or receive calls.  
• Check both ends of the telephone line cord.  
• Make sure the AC adapter is plugged into the base and wall outlet.  
• Disconnect the AC adapter for a few minutes. Then reconnect it.  
• Change the digital security code (see page 37).  
• Make sure that the handset is not too far from the base.  
• Check the dialing mode used by your telephone company.  
[ 4 1 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Symptom  
Suggestion  
The handset doesn't ring or  
receive a page.  
• The battery pack may be weak. Charge the battery for 15-20 hours.  
• The handset may be too far from the base unit.  
• Place the base unit away from appliances or metal objects.  
• Change the digital security code (see page 37).  
• Check the battery pack to ensure there is a secure connection.  
• Make sure ringer volume isn't set to “off”.  
Severe noise interference.  
• Keep the handset away from microwave ovens, computers, remote control toys, wireless  
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical  
appliances.  
• Move the base to another location or turn off the source of interference.  
The answering system does  
not work.  
• Make sure the AC adapter is plugged into wall outlet.  
• Make sure the answering system is turned on.  
The answering system does not • Set the record time to either the one minute or four minute option.  
record any messages.  
• The memory may be full. Delete some or all of the saved messages.  
Messages are incomplete.  
• The incoming messages may be too long. Remind callers to leave a brief message.  
• The memory may be full. Delete some or all of the saved messages.  
After a power failure,  
• Record your personal outgoing message again. The default message should remain.  
the outgoing message is deleted.  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 4 2 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Suggestion  
• Adjust the speaker volume on the base unit.  
No sound on the base unit  
speaker during call monitoring  
or message playback.  
Cannot access remote call-in  
features from another touch-  
tone phone.  
• Make sure you're using the correct PIN code.  
• Make sure that the touch-tone phone you're using can transmit the tone for at least two  
seconds. If it cannot, you may have to use another phone to access your messages.  
If you still have a problem.  
• Call our customer hotline at 1-800-297-1023.  
[ 4 3 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
Liquid Damage  
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps.  
Case  
Action  
If the handset or base is exposed to  
moisture or liquid, but it only affects the  
exterior plastic housing.  
Wipe off the liquid, and use as normal.  
If moisture or liquid has entered the  
Handset:  
plastic housing (i.e., liquid can be heard 1.Remove the battery cover and leave it off for ventilation  
in the phone or liquid has entered the  
handset battery compartment or vent  
openings on the base).  
2.Remove the battery pack by disconnecting  
3.Leave the battery cover off and the battery pack disconnected for at least 3 days  
4.Once the handset is completely dry, reconnect the battery pack and the battery cover.  
5.Recharge the handset’s battery pack for 20 hours before using again.  
Base:  
1.Disconnect the AC adapter from the base unit, cutting off electrical power.  
2.Disconnect the telephone cord from the base unit.  
3.Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while recharging the battery pack to  
avoid charge interruption.  
CAUTION:  
DO NOT use a microwave oven to speed up the drying process. This will cause permanent  
damage to the handset, base and the microwave oven.  
After following these steps, if your cordless telephone does not work, please send to:  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd.  
Ft. Worth, TX 76155  
1-800-554-3988, Monday through Friday  
8 a.m. to 5 p.m. CST  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 4 4 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Important Safety Instructions  
When using your telephone equipment, these basic safety precautions  
should always be followed to reduce the risk of fire, electrical shock, and  
injury to persons:  
Additional Battery Safety Precautions  
Caution! To reduce the risk of fire or injury to persons by the battery,  
read and follow these instructions:  
1. Use only the Uniden battery pack specified in the owner’s manual.  
2. Do not dispose of the battery pack in a fire. The cell may explode.  
Check the nickel-cadmium battery disposal package insert for disposal  
instructions.  
3. Do not open or mutilate the battery pack. Released electrolyte is  
corrosive and may cause damage to the eyes or skin. It may be toxic  
if swallowed.  
4. Exercise care in handling the battery in order not to short the battery  
with conducting materials such as rings, bracelets, and keys. The  
battery or conductor may overheat and cause burns.  
5. Charge the battery pack provided with or identified for use with this  
product only in accordance with the instructions and limitations  
specified in the owner’s manual provided for this product.  
6. Observe proper polarity orientation between the battery pack and  
battery charger.  
Precautions!  
Before you read anything else, please observe the following:  
Warning!  
1. Read and understand all instructions.  
Uniden America Corporation DOES NOT represent this unit to be  
waterproof. To reduce the risk of fire, electrical shock, or damage to the  
unit, DO NOT expose this unit to rain or moisture.  
2. Follow all warnings and instructions marked on the product.  
3. Unplug this product from the wall outlet before cleaning. Use a dry  
cloth for cleaning without liquid or aerosol cleaners.  
4. Do not use this product near water; for example, near a bathtub, wash  
bowl, kitchen sink or laundry tub, in a wet basement, or near a  
swimming pool.  
5. Do not place this product on an unstable cart, stand, or table.  
The telephone may fall, causing serious damage to the unit.  
6. Slots and openings in the cabinet and the back or bottom are  
provided for ventilation. To protect the product from overheating,  
these openings must not be blocked or covered. This product should  
never be placed near or over a radiator or heat register. This product  
should not be placed in a built-in installation unless proper  
ventilation is provided.  
7. This product should be operated only from the type of power source  
indicated on the marking label. If you are not sure of the type of power  
supply to your home, consult your dealer or local power company.  
8. Do not allow anything to rest on the power cord. Do not locate this  
product where the cord will be damaged by persons walking on it.  
9. Do not overload wall outlets and extension cords, as this can result in  
the risk of fire or electrical shock.  
10.Never push objects of any kind into this product through cabinet  
slots, as they may touch dangerous voltage points or short out parts  
that could result in a risk of fire or electric shock. Never spill liquid of  
any kind on the product.  
Rechargeable Nickel-Metal-Hydride Battery Warning  
•This equipment contains a rechargeable nickel-cadmium battery.  
•Cadmium is a chemical known to the State of California to cause cancer.  
•The rechargeable nickel-cadmium battery contained in this equipment  
may explode if disposed of in a fire.  
•Do not short-circuit the battery.  
•Do not charge the rechargeable nickel-cadmium battery used in this  
equipment in any charger other than the one designed to charge this  
battery as specified in the owner’s manual.  
Using another charger may damage the battery or cause the battery to  
explode.  
SAVE THESE INSTRUCTIONS!  
Important Electrical Considerations  
Unplug all electrical appliances when you know an electrical storm is  
approaching. Lightning can pass through your household wiring and  
damage any device connected to it. This phone is no exception.  
Rechargeable Nickel-Cadmium  
Batteries Must Be Recycled or  
Disposed of Properly  
The FCC Wants You To Know  
•Uniden voluntarily participates in an RBRC® industry program to collect  
and recycle nickel-cadmium batteries at the end of their useful life,  
when taken out of service within the United States.  
The RBRC® program provides a convenient alternative to placing used  
nickel-cadmium batteries into the trash or municipal waste stream,  
which is illegal in some areas.  
•Through the RBRC® program, Uniden makes it easy for you to drop off  
the used battery at local retailers of replacement nickel-cadmium  
batteries. You may also contact your local recycling center for  
information on where to return the used battery. Please call 1-800-8-  
BATTERY for information on Ni-Cd battery recycling in your area.  
Uniden's involvement in this program is part of its commitment to  
protecting our environment and conserving natural resources.  
•RBRC® is a registered trademark of the Rechargeable Battery Recycling  
Corporation.  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as detailed by  
the owner’s manual, could void your authority to operate this product.  
Your telephone compiles with Part 68 of FCC Rules. You must, upon  
request, provide the FCC registration number and the REN to your  
telephone company. Both numbers are on the base unit.  
11.To reduce the risk of electric shock, do not disassemble this product.  
Take it to qualified service personnel when service or repair work is  
required. Opening or removing covers may expose you to dangerous  
voltages or other risks. Incorrect reassembly can cause electric shock  
when the appliance is subsequently used.  
12.Unplug this product from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
A. When the power supply cord is damaged or frayed.  
B. If liquid has been spilled into the product.  
Note:  
You must not connect your phone to:  
• coin-operated systems  
• most electronic key telephone systems  
This device complies with Part 15 of the FCC rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) This device must accept any interference received,  
including interference that may cause undesired operation. Privacy of  
communications may not be ensured when using this phone.  
C. If the product has been exposed to rain or water.  
D. If the product does not operate normally when following the  
operating instructions. (Adjust only those controls that are  
covered by the operating instructions. Improper adjustment of  
other controls may result in damage and will often require  
extensive repair work by a qualified technician.)  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
Range  
Your new phone is designed to achieve the maximum possible range by  
transmitting and receiving according to the highest specifications set  
forth by the FCC. We have rated this phone to operate at a maximum  
distance with the qualification that the range depends upon the  
environment in which the telephone is used. Many factors limit range,  
and it would be impossible to include all the variables in our rating. The  
Maximum Range rating of this phone is meant to be used as a means of  
comparison against other range claims.  
E. If the product has been dropped or the cabinet has been damaged.  
F. If the product exhibits a distinct change in performance.  
13.Do not use the telephone to report a gas leak in the vicinity of the  
leak.  
Uniden works to reduce lead content in our PVC coated cords in our  
product and accessories.  
WARNING: The cords on this products and/or accessories contain lead, a  
chemical known to the State of California to cause birth defects or other  
reproductive harm. Wash hands after handling.  
[ 4 5 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Telephone Line Problems  
Installation Considerations  
One Year Limited Warranty  
The FCC has granted the telephone company the right to disconnect  
service in the event that your phone causes problems on the telephone  
line. Also, the telephone company may make changes in facilities and  
services which may affect the operation of your unit. However, your  
telephone company must give adequate notice in writing prior to such  
actions to allow you time for making necessary arrangements to continue  
uninterrupted service.  
Important: Evidence of original purchase is required for warranty service.  
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)  
Selecting a Location  
Before choosing a location for your new phone, there are some important  
guidelines you should consider:  
• The location should be close to both a phone jack and continuous  
power outlet. (A continuous power outlet is an AC outlet which does  
not have a switch to interrupt its power.)  
• Keep the base and handset away from sources of electrical noise such  
as motors or fluorescent lighting.  
• The base can be placed on a desk or tabletop or mounted on a standard  
telephone wall plate.  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original  
retail owner, this Uniden Product to be free from defects in materials and  
craftsmanship with only the limitations or exclusions set out below.  
WARRANTY DURATION: This warranty to the original user shall terminate  
and be of no further effect 12 months after the date of original retail  
sale. The warranty is invalid if the Product is (A)  
damaged or not maintained as reasonable or necessary, (B) modified,  
altered, or used as part of any conversion kits, subassemblies, or any  
configurations not sold by Uniden, (C) improperly installed,  
(D) serviced or repaired by someone other than an authorized Uniden  
service center for a defect or malfunction covered by this warranty, (E)  
used in any conjunction with equipment or parts or as part of any system  
not manufactured by Uniden, or (F) installed or programmed by anyone  
other than as detailed by the owner’s manual for this product.  
If you are having trouble with your telephone service, you must first  
disconnect your phone to determine if it is the cause of your problem. If  
you determine that it is the cause, you must leave it disconnected until  
the trouble has been corrected.  
• You should charge your new phone for 15-20 hours before completing  
the installation or using the handset.  
Radio Interference  
Radio interference may occasionally cause buzzing and humming in your  
cordless handset, or clicking noises in the base. This interference is  
caused by external sources such as TV, refrigerator, vacuum cleaner,  
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE.  
If these noises continue and are too distracting, please check around  
your home to see what appliances may be causing the problem.  
In addition, we recommend that the base not be plugged into a circuit  
that also powers a major appliance because of the potential for  
interference. Be certain that antenna on the unit is fully extended.  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving radio  
signals from another cordless telephone or other source of interference.  
If you cannot eliminate this type of interference, you need to change to  
a different channel.  
Telephone Line Outlets  
There are two types of phone outlets:  
Modular Jack  
Most phone equipment available now uses modular jacks. Phone cords are  
fitted with a molded plastic connector which plugs into this type of jack.  
If you do not have modular phone jacks, contact your local telephone  
company for information about their installation.  
STATEMENT OF REMEDY: In the event that the product does not conform  
to this warranty at any time while this warranty is in effect, warrantor  
will either, at its option, repair or replace the defective unit and return it  
to you without charge for parts, service, or any other cost (except  
shipping and handling) incurred by warrantor or its representatives in  
connection with the performance of this warranty. Warrantor, at its  
option, may replace the unit with a new or refurbished unit. THE LIMITED  
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY  
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL  
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,  
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT  
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR  
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or  
limitation of incidental or consequential damages so the above limitation  
or exclusion may not apply to you.  
Hardwired Jack  
Some equipment is wired directly to a phone jack, and these types of  
installations require a modular jack converter. This type of installation is  
not difficult; however, you should contact your Uniden telephone dealer  
or a telephone supply store for advice about the proper adapter or  
converter for your particular situation.  
Finally, it should be noted that some cordless telephones operate at  
frequencies that may cause interference to nearby TVs and VCRs.  
To minimize or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a TV or VCR.  
If interference is experienced, moving the cordless telephone farther  
away from the TV or VCR will often reduce or eliminate the interference.  
Connecting the Telephone Cords  
Consider these safety guidelines before connecting the telephone cords:  
Caution!  
• Never install telephone wiring during a lightning storm.  
• Never touch uninsulated telephone wires or terminals unless the  
telephone line has been disconnected.  
More than One Cordless Telephone  
If you want to use more than one cordless telephone in your home, they  
must operate on different channels. Press the delete/channel key to  
select a channel that provides the clearest communication.  
• Use caution when installing or modifying telephone lines.  
LEGAL REMEDIES: This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to state. This warranty  
is void outside the United States of America and Canada.  
Applying Power to the Base  
Cordless Telephone Privacy  
This phone requires an AC outlet, without a switch to interrupt power,  
and the included AC adapter. To relieve strain on the DC plug when the  
phone is placed on a desk or table, wrap the power cord around the  
strain relief notch on the back of the base.  
Cordless telephones are radio devices. Communications between the  
handset and base of your cordless telephone are accomplished by means  
of radio waves which are broadcast over the open airways. Because of the  
inherent physical properties of radio waves, your communications can be  
received by radio receiving devices other than your own cordless  
telephone unit. Consequently, any communications using your cordless  
telephone may not be private.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner’s manual you are certain that the  
Product is defective, pack the Product carefully (preferably in its original  
packaging). The Product should include all parts and accessories  
originally packaged with the Product. Include evidence of original  
purchase and a note describing the defect that has caused you to return  
it. The Product should be shipped freight prepaid, by traceable means, to  
warrantor at:  
NOTE:  
Place the power cord so that it does not create a trip hazard, or  
where it could become chafed and create a fire or other  
electrical hazards.  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd. Fort Worth, TX 76155  
(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday  
or visit our website at www.uniden.com  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 4 6 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
I.C. Notice  
TERMINAL EQUIPMENT  
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.  
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies  
that registration was performed based on a Declaration of Conformity indicating that Industry Canada  
technical specifications were met. It does not imply that Industry Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The  
REN assigned to each terminal equipment provides an indication of the maximum number of terminals  
allowed to be connected to a telephone interface. The termination on an interface may consist of any  
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of  
all the devices does not exceed five.  
RADIO EQUIPMENT  
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were  
met.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device  
must accept any interference, including interference that may cause undesired operation of the device. "Privacy of  
communications may not be ensured when using this telephone".  
[ 4 7 ] A D D I T I O N A L I N F O R M A T I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
   
Index  
A
E, F, G, H, I, J, K, L  
Storing phone numbers in speed  
dial memory . . . . . . . . . . 15  
AC adapter information . . . . . . 40  
Announce only feature . . . . . . 22  
Answering system  
Deleting a message . . . . . . . 30  
Playing a message . . . . . . . . 27  
Recording a conversation . . . 31  
Remote access . . . . . . . . . . 32  
Repeating a message . . . . . . 28  
Skipping a message . . . . . . . 29  
Turning on/off . . . . . . . . . . 17  
Earpiece volume . . . . . . . . . . . 11  
Find handset . . . . . . . . . . . . . 13  
General information . . . . . . . . . 40  
Greeting . . . . . . . . . . . . . . . . 24  
I.C. notice . . . . . . . . . . . . . . . 47  
Interference . . . . . . . . . . . . . . 46  
Liquid damage . . . . . . . . . . . . 44  
T, U  
Tone dialing switch-over . . . . . 12  
Traveling out-of-range . . . . . . . 12  
Troubleshooting . . . . . . . . . . . 41  
V, W, X, Y, Z  
Voice Memo . . . . . . . . . . . . . . 31  
Volume control  
Base . . . . . . . . . . . . . . . . . 26  
Handset . . . . . . . . . . . . . . . 11  
Wall mounting . . . . . . . . . . . . . 8  
Warranty . . . . . . . . . . . . . . . . 46  
M, N, O, P, Q  
Making a call . . . . . . . . . . . . . 10  
Menu mode . . . . . . . . . . . . . . 18  
Message alert . . . . . . . . . . . . . 23  
Outgoing message . . . . . . . . . . 24  
Personal security code  
B
Battery pack  
Information . . . . . . . . . . . . 40  
Installing . . . . . . . . . . . . . . 6  
Preparing and charging . . . . . 6  
Replacement and handling . . 38  
(PIN code) . . . . . . . . . . . . . . . 20  
Precautions . . . . . . . . . . . . . . 45  
R
C
Receiving a call . . . . . . . . . . . 10  
Record time . . . . . . . . . . . . . . 22  
Redial . . . . . . . . . . . . . . . . . . 10  
Remote access . . . . . . . . . . . . 32  
Ring time . . . . . . . . . . . . . . . . 21  
Ringer tone (Handset) . . . . . . . 11  
Ringer volume (Base) . . . . . . . . 26  
RocketDial . . . . . . . . . . . . . . . 14  
Call waiting . . . . . . . . . . . . . . 13  
Channel . . . . . . . . . . . . . . . . 13  
Charging the battery pack . . . . . 7  
Cleaning contacts . . . . . . . . . . 39  
Clock . . . . . . . . . . . . . . . . . . 19  
Connect the base unit . . . . . . . . 7  
Controls and functions . . . . . . . 3  
D
S
Dial mode . . . . . . . . . . . . . . . . 9  
Digital security code . . . . . . . . 37  
Speaker volume . . . . . . . . . . . . 26  
Speed dial memory  
Making calls from speed dial  
memory . . . . . . . . . . . . . . 15  
w w w . u n i d e n . c o m  
A D D I T I O N A L I N F O R M A T I O N [ 4 8 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
[ 4 9 ]  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
w w w . u n i d e n . c o m  
[ 5 0 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
[ 5 1 ]  
w w w . u n i d e n . c o m  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Operation Card  
C
U
T
C
U
T
REMOTE OPERATION CARD  
MEMORY LOCATION MEMO  
Name Phone Number  
Memory  
Location  
Remote access away from home  
Turn on the answering system remotely  
1. Call your phone number from a 1. Call your phone and let it ring  
1*  
2
touch-tone phone.  
10 times until it answers.  
2. Press 0 and enter your PIN  
code.  
3. Press 0 then 5 to stop  
the announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts. The  
phone stands by for you to  
enter a command.  
3
4
5
3. To quit, hang up the phone.  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
REMOTE OPERATION CARD  
Memory  
Location  
Remote access away from home  
Turn on the answering system remotely  
1. Call your phone number from a 1. Call your phone and let it ring  
1*  
2
touch-tone phone.  
10 times until it answers.  
2. Press 0 and enter your PIN  
code.  
3. Press 0 then 5 to stop  
the announcement.  
4. Press 0 then 6 to turn the  
answering system on.  
2. During the outgoing message,  
press 0 and enter your PIN  
code. The answering system  
announces the number of  
messages stored in memory  
and the voice prompts. The  
phone stands by for you to  
enter a command.  
3
4
5
3. To quit, hang up the phone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Operation Card  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
Task  
Repeat a Message  
Play Incoming Messages  
Skip a Message  
Delete a Message  
Stop Operation  
Answering System On  
Memo Record/Stop  
Key  
0
1
2
3
4
5
6
7
8
9
0
Memory  
Location  
0
0
0
0
0
0
0
0
1
6
7
8
Greeting Message Record/Stop  
Answer System Off  
Voice Prompts  
9
10  
C
U
T
C
U
T
MEMORY LOCATION MEMO  
Name Phone Number  
Task  
Repeat a Message  
Play Incoming Messages  
Skip a Message  
Delete a Message  
Stop Operation  
Answering System On  
Memo Record/Stop  
Key  
0
0
0
0
0
0
0
0
0
1
1
2
3
4
5
6
7
8
9
0
Memory  
Location  
6
7
8
Greeting Message Record/Stop  
Answer System Off  
Voice Prompts  
9
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
At Uniden, we'll take care of you!  
If you need any assistance with this product, please call our Customer Hotline at  
1-800-297-1023  
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.  
Our Uniden representatives will be happy to help you with any matters regarding  
the operation of this unit, available accessories, or any other related matters.  
Thank you for purchasing a Uniden product.  
Hours: M-F 8:00 AM to 5:00 PM CST.  
www.uniden.com  
Accessibility  
?
For information on the accessibility features of this product, please call  
1-800-874-9314 (V/TTY)  
May be covered under one or more of the following U.S. patents:  
4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905  
5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790  
5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312  
5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152  
5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227  
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082  
6,125,277 6,253,088 6,314,278 6,418,209  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teledyne Oxygen Equipment 318R User Manual
Telex Intercom System 38109 977 User Manual
Transcend Information Computer Drive V90 Classic User Manual
Ultra Products Network Card ULT31344 User Manual
Uniden Cordless Telephone 986 2 User Manual
Vantec Computer Drive UGT UF100 User Manual
ViewSonic MP3 Player NMP 500 User Manual
Viper Automobile Electronics G4203V User Manual
VistaQuest Digital Camera VQ7020 User Manual
Waterford Precision Cycles Freezer Freestanding 30 User Manual