ELBT 595
SERIES
OWNER'S
MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Registering a Mobile Phone to the
Main Base Unit
Welcome/Features/Terminology/
Accessibility
Changing the sorting order
Naming phonebook groups
68
69
2
4
6
6
7
38
Using Bluetooth Headset
(Handset Only)
Making Calls with the Phonebook 69
Controls & Functions
Setting up the Phone
Choose the best location
Battery Backup Feature
Install the rechargeable
battery pack
44
48
Caller ID Features
Using the Caller ID List
Deleting Caller ID numbers
Answering Machine
Features
70
70
71
72
72
Using Your Phone
Making Calls Using the Land Line 48
Receiving a call/AutoTalk
set to Off
50
8
Low battery alert
Speakerphone During a Call
Moving out of range
Call Waiting
73
Cleaning the battery charging
contacts
51
51
52
52
53
53
55
56
Setting Your Outgoing Greeting 76
9
Using the Answering Machine
77
Connect the base and charge the
handset
Recording a phone conversation 79
10
Call Waiting Deluxe
Placing a Call on Hold
Conferencing
Screening Calls
Do Not Disturb (DND)
Remote Operation
Multi-Handset Features
Using DirectLink Mode
Room/Baby Monitor
Intercom
79
80
81
83
83
84
85
86
87
87
Mounting the Base Unit on a Wall 11
Standard wall plate mounting
Expanding Your Phone
Backwards/Forwards
Compatibility
11
12
Mobile Line Transfer
Redialing Calls
12
Adjusting Base Ringer and
Speaker Volumes
Connect the expansion handset's
charger
57
13
13
Using the Handset Volume
Setting Menu
Transferring a Call
Note on Power Sources
Power Failure
Register the Handset
58
59
59
60
60
60
61
63
Register expansion handsets to the
Mute
main base
14
Mute the Microphone
Tone Dialing Switch Over
Privacy Mode
Battery replacement and
handling
Changing the Digital Security Code 15
87
87
88
88
88
89
91
93
94
95
97
98
100
Installing the Holster
Optional Headset Installation
Installing Uniden's Cordless
Telephone Customization Tool
Using the Interface
Display Icons
15
16
Warning
Find Handset
General Information
AC Adapter Information
Battery Information
Troubleshooting
Reminder (Handset only)
Using the Phonebook
Creating and Editing Phonebook
Entries
17
18
19
20
22
23
24
28
30
63
66
Bluetooth Troubleshooting
System Reset
Soft Key Function
Entering text
Storing Caller ID or Redial
Numbers in the Phonebook
Storing and Editing Numbers
from the Dial Operation
Managing the Phonebook
Checking the number of
stored entries
Liquid Damage
Main Menu Options
System Setup Menu
Global Setup
Precautions & Warranty
I.C. Notice
66
67
Index
Setting the Ringer Options
Remote Operation Card
Display Settings (Handset Only) 35
68
Using the Bluetooth Feature
38
w w w . u n i d e n . c o m
[ 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a Uniden Multi-Handset phone. This phone is compatible
with Bluetooth enabled mobile telephones and headsets. The USB connection lets
you use your personal computer to edit your phonebook, download schedule
Welcome
Features
reminders, and even import contacts from Microsoft Outlook.
Note: Illustrations in this manual are used for explanation purposes. Some
illustrations in this manual may differ from the actual unit.
As an Energy Star Partner, Uniden has determined that this product or product
models meets the Energy Star guidelines for energy efficiency.
Energy Star is a U.S. registered mark.
• 5.8GHz Digital Expandable
• Compatible with Bluetooth Enabled Mobile Handsets/Headsets
• Integrated Answering Device
• Caller ID/Call Waiting Deluxe Options
• Customize Handset Profiles Using Personal Computer
• 100 Phonebook Names (4 Numbers Per Name)
• Downloadable Images
• Recordable Ringer Tones
• Calendar with Schedule Reminder Capability
• Battery Backup During Power Failure
Uniden is a registered trademark of Uniden America Corporation. AutoStandby,
DirectLink, IntegriSound and Random Code are trademarks of Uniden America.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
BLUETOOTH trademarks are owned by their proprietor and used by Uniden America
Corporation under license.
w w w . u n i d e n . c o m
Welcome/Features/Terminology/Accessibility [ 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
NOKIA is a registered trademark of Nokia Corporation. MOTOROLA is a registered trademark of Motorola,
Inc. PLANTRONICS is a registered trademark of Plantronics, Inc. All product or service names are the
property of their respective owners.
Portions of this product were created using LEADTOOLS 1991-2002, LEAD Technologies, Inc. ALL RIGHTS
RESERVED.
Terminology
•Standby mode: The handset is not in use. If it is off the cradle, no line has been activated. No dial
tone is present.
•Talk mode:
A telephone line has been activated on the handset, enabling a dial tone.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need
customer service assistance or if you have any questions about how Uniden's products can accommodate
persons with disabilities, please call the accessibility voice/TTY line:
1-800-874-9314
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a
message, and we will call you back. Information is also available on our website, www.uniden.com, under
the "Accessibility" link.
[ 3 ] Welcome/Features/Terminology/Accessibility
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Controls & Functions
1.New Message LED
2.Speakerphone Speaker and Ringer
3.Sub LCD
4.Handset Earpiece
5.LCD display
4
5
6.Speaker Volume up/down key (P. 59)
7. (phonebook)/ (P. 63 & 21)
8.Talk/flash (P. 48 & 52)
9.Back/hold/int’com (intercom)
(P. 21 & 53 & 85)
20
21
22
11
10. /tone (P. 60)
1
2
*
11.Soft menu keys (P. 20)
12
13
14
15
12.
(message)/ (P. 78 & 21)
6
7
8
13.Menu/select (P. 21)
14.Cid (Caller ID) / (P. 70 & 21)
15.Redial/ (P. 56 & 21)
16.End (P. 51)
23
24
16
9
3
17.# (P. 71)
18.Handset Microphone
19.Handset Charging Contacts
20.USB jack cover
10
17
18
19
21.Handset Antenna
22.Headset Jack Cover
23. (speaker phone) (P. 49)
24.Handset Battery Compartment
w w w . u n i d e n . c o m
Controls & Functions [ 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
27
28 29 30 31 32
46 47
33
34
35
36
37
25
26
48
38
39
40
41
42
43 44
45
25. Base Charge Contacts
26. Base Speaker
33. Speaker Volume up (P. 57)
34. Menu/select (P. 21)
35. Cid (Caller ID)/ (P. 22 & 70)
36. Speaker Volume down (P. 57)
37. End/find hs (P. 51)
42. Base Microphone
43. Handset Charge LED
27. Base Antenna
44. /tone (P. 60)
*
28. Dnd (do not disturb) (P. 80)
29. LCD Display
30. Soft keys (P. 20)
31. Back/hold/int’com (intercom)
(P. 21 & 53 & 85)
32. Phonebook/ key (P. 63 & 22)
45. # (P. 71)
46. DC IN 9V Jack
47. TEL LINE Jack
38.
39.
(speaker)/flash (P. 50 & 52)
(play/stop) (P. 78)
48. Base Battery Compartment
40. (delete) (P. 78)
41. answer on/off (P. 77)
[ 5 ] C o n t r o l s & F u n c t i o n s
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Phone
note
Choose the best location
When choosing a location for your new phone, here are some important guidelines
you should consider:
For maximum range:
•Do not hold the
handset where you
would block the signal.
Correct
Antenna
• The location should be close to both a phone jack and a continuous power outlet (one
which is not connected to a switch).
• The base and handset should be kept away from sources of electrical noise such as motors,
microwave ovens, and fluorescent lighting.
Incorrect
• For better reception, place the base as high as possible.
•Metal and reinforced
concrete may affect
cordless telephone
performance.
• The base should be placed in an open area for optimum range and reception.
• If your home has specially wired alarm equipment connected to phone line, be sure that
installing the system does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, contact your telephone company or a qualified
installer.
w w w . u n i d e n . c o m
Setting up the Phone [ 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Backup Feature
note
The battery backup allows you to make and receive calls during a power failure. You
can use any handset or the base, just as you would normally.
•
appears in LCD as
a warning that battery
backup pack is NOT
installed in the base
unit.
Install the backup battery in the base
1) Open the battery case cover by pressing the release button on
the bottom of the base as shown.
•To use the Battery
Backup Feature, you
need to connect the AC
adapter to the base
and charge the base
battery at least for 24
hours.
•During initial setup,
the AC Adapter must
be connected to
2) Plug the battery connector (red and black wires) into the jack
inside the battery compartment. (The connector notches fit into
the grooves of the jack only one way). Match the wire colors to
the polarity label in the battery compartment, connect the
battery and listen for a click to insure connection.
3) Make sure you have a good connection by gently pulling on the
battery wires. If the connection is secure, the battery jack will
remain in place.
activate the base unit.
Once activated, you
can make or receive
call using the backup
battery.
4) Place the battery case cover back on the base.
5) Align the tabs on the cover with the grooves on the base, and
press down the cover until it clicks into place.
•Use only the Uniden
(BT-446) rechargeable
battery pack supplied
with your cordless
telephone.
[ 7 ] Setting up the Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the rechargeable battery pack
Follow the steps below if you need to install a battery.
note
1) Press down on the handset battery case cover (use the finger indention for a better grip)
and slide the cover downward to remove.
Use only the Uniden
(BT-0002)
2) Place the battery pack in the battery compartment with the connectors on the battery and
on the compartment aligned.
rechargeable battery
pack supplied with
your cordless
telephone.
3) Place the battery case cover back on the handset and slide it upwards until it clicks into
place.
w w w . u n i d e n . c o m
Setting up the Phone [ 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Low battery alert
When the battery pack is very low, the phone is programmed to eliminate functions
in order to save power.
note
The battery pack needs to be charged when
•Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time.
- The empty battery icon appears.
.QYꢄ$CVVGT[
-
Low Battery appears in the display.
If the phone is in standby mode, none of the keys will operate. If
you are on a call, complete your conversation as quickly as
possible, and return the handset to the cradle.
•For optimum
performance, be sure
to return the handset
to the cradle after
each telephone call.
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts on the handset once a
month. Dampen a cloth with plain water. Gently rub the damp cloth over the
charging contacts until all visible dirt is removed. Dry the contacts thoroughly
before returning the handset to the cradle.
•If the handset is left
off of the base, the
actual talk mode
duration will be
reduced respective to
the amount of time the
handset is off the
cradle.
Caution: Do not use paint thinner, benzene,
alcohol, or other chemical products. Doing so
may discolor the surface of the telephone and
damage the finish.
[ 9 ] Setting up the Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the base and charge the handset
1) Connect the AC adapter to the DC IN 9V jack.
note
Place the base close to the AC outlet to avoid
long extension cords.
•
Use only the supplied
AD-0009 AC adapter.
Do not use any other
AC adapter.
2) Connect the AC adapter to a continuous power
supply (i.e., an outlet that is not controlled by a
switch).
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
3) Close the handset and place it in the base with
the smaller LCD screen facing forward.
4) Make sure that the charge LED illuminates.
electrical hazard.
If the LED does not illuminate, check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
•Don't place the base in
direct sunlight or
subject it to high
temperatures. The
battery may not charge
properly.
5) Charge your handset at least 10 hours before plugging into the phone line.
6) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE
jack and to a telephone outlet.
If your telephone
outlet isn't modular,
contact your
telephone company.
w w w . u n i d e n . c o m
Setting up the Phone [ 1 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches
on the base top.
!
DO NOT use an AC
outlet controlled by a
wall switch.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded
wiring channel as shown.
4) Plug the AC adapter into a standard 120V AC
wall outlet.
5) Plug the telephone line cord into the TEL LINE
jack.
Wrap the cord inside the molded wiring channel
as shown.
6) Plug the telephone line cord into the telephone
outlet.
7) Align the mounting slots on the base with the
mounting posts on the wall. Then push in and
down until the phone is firmly seated.
[ 1 1 ] Mounting the Base Unit on a Wall
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Expanding Your Phone
note
Your phone can support a total of
ten handsets. Expansion handsets
do not need to be connected to a
phone jack. Expansion handsets
allow you to use additional features
such as DirectLink Mode and up to
5-way conference calling. Expansion
handsets need to be registered to
the base before they will operate.
10 Handsets
•Advanced features may
not be supported by
older handsets.
•If you have any trouble
with your phone, visit
our web site at
www.uniden.com or call
our Customer Hotline
(see back cover page).
....
Backwards/Forwards Compatibility
Your phone is compatible with other Uniden 5.8GHz Digital
Expandable Handsets. Compatible models include the TCX860
and ELX500. (please check www.uniden.com for an updated list
of expansion handset compatible with this series.)
w w w . u n i d e n . c o m
Expanding Your Phone [ 1 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the expansion handset's charger
The handset is powered by a rechargeable
battery pack. The battery recharges
automatically when the handset is placed
in the charger.
note
•Use only the supplied
AD-0005 AC adapter.
Do not use any other
AC adapter.
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
Sub-LCD screen facing forward.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see
that the AC adapter is plugged in and the
handset makes good contact with the
charger charging contacts.
4) Charge the handset battery pack for at least
10 hours before using your new cordless
telephone for the first time.
•Your phone maybe
compatible with other
Uniden 5.8Ghz Digital
Expandable Systems.
Look for the technology
icon on our boxes or
visit our website for a
list of compatible
Register the Handset
Handsets supplied with the phone are registered to the base by the factory. Pre-
registered handset display a handset ID number. Handsets that have not been
registered display MUST place handset in base to register! Models may vary, refer
to Owners Manual for help. in the LCD. and Handset must be registered in the sub
LCD. When you register an extra handset to the base, the handset ID will be
assigned. Only one handset can be registered at a time.
models.
[ 1 3 ] Expanding Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Register expansion handsets to the main base
Before the expansion handset is registered, the battery pack MUST be charged for 10
hours.
To register an ELX500 handset, simply place it in the main base.
To register a TCX860 handset, follow the steps below:
1) From the base, press menu/select and select System
ꢀꢁ5[UVGOꢀ5GVWR
ꢀꢀ$NWGVQQVJ
4GIKUVGTꢀ*CPFUGV
/'55#)'
Setup menu.
2) Select Register Handset, and press menu/select.
0
5'.'%6
3) On the handset, press and hold # until you hear a
beep.
While the handset is registering, Handset Registering will appear in the LCD. When
Registration complete. is displayed, the handset has been registered to the base. If
Registration failed. appears, please try these steps again.
w w w . u n i d e n . c o m
Expanding Your Phone [ 1 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
note
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code:
1. De-register all the handsets you have (see page 93).
2. Re-register each handset by following the steps on page 14.
Installing the Holster
You must remove the
holster to charge the
handset.
- Line up the groove on the back of the handset with the groove on
the holster. The handset fits in the holster only one way.
- Slide the phone into the holster.
- Use the spring clip to attach the holster to your belt or pocket.
[ 1 5 ] Changing the Digital Security Code
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Headset Installation
note
Your phone may be used with an optional headset
To use an optional headset, insert the headset plug into
the headset jack. Your phone is ready for hands-free
conversations. Headsets may be purchased by calling
Uniden's Parts Department (see back cover page).
To use with a
Bluetooth® headset,
see page 44.
w w w . u n i d e n . c o m
Optional Headset Installation [ 1 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Uniden's Cordless Telephone
Customization Tool
This phone includes Uniden's Cordless Telephone Customization Tool for your Windows
PC. You can use this software application to completely configure your phone,
download pictures for wallpaper, and import contacts from Microsoft® Outlook®.
NOTE: Uniden's Cordless Telephone Customization Tool application requires
Microsoft®, Windows® 98SE, Windows ME, Windows 2000, Windows XP and more
than 150MB free hard drive space.
1) Insert the Cordless Telephone
Customization Tool CD into your
computer's CD-ROM drive. The
installation application should start
automatically.
2) If the application doesn't start, go to
To PC
the Start menu and select Run.
To the
USB jack
3) In the window, type d:\autorun.exe
(where d is the letter assigned to your
CD-ROM drive), and click OK.
4) Once the software is installed, connect
the USB cable to the handset and your
PC as shown.
5) Customize your Uniden Cordless Handset.
For complete instructions on using Uniden's Cordless Telephone Customization Tool,
see the help file on the CD-ROM.
[ 1 7 ] Installing Uniden's Cordless Telephone Customization Tool
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Interface
Example of the standby mode display
• Handset
•Sub-LCD
Date, Day of the week, and time/
Battery icon
Number of new caller ID calls received.
Battery icon
ꢀꢄꢄꢅꢆꢃꢀꢄꢂꢁꢃꢃ#
Date, Day of the week, and time
ꢀꢁꢂꢃꢀꢄ570ꢄꢅꢀꢆꢅꢀ#
0GYꢀ%+&ꢁꢀꢂꢃ
Number of new caller ID calls received
ꢄꢄ0GYꢄ%+&ꢆꢄꢅꢀ
.#0&
/1$+.'
• Base
Day of the week and time
/'55#)'
570ꢀꢂꢄꢁꢃꢃ#
Number of new caller ID calls received
ꢀꢀ
0GYꢀ%+&ꢁꢀꢂꢃꢃ
0
.#0&
/1$+.'
Number of message
Status if your answering machine
appears if you have a new message.
appears when the message storage is full.
appears if you set your answering system to announce only.
w w w . u n i d e n . c o m
Using the Interface [ 1 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Icons
ICON
DESCRIPTION
Handset
Sub-LCD
Base
Battery icons indicate the handset battery status. This icon cycles
depending on the battery status (empty, low, medium, and full).
-
Ringer off icon indicates that ringer is turned off.
LAND line icon indicates that the land line is in use.
MOBILE line icon indicates that the mobile line is in use.
Bluetooth icon appears when you are using bluetooth features.
Mute icon appears when you mute the handset or the base.
-
-
-
-
Speaker icon appears when the handset speaker phone is used.
When a new message is received, an envelope icon is displayed
on the LCD screen
Privacy icon appears when the Privacy Mode is turned on.
Call record icon appears while recording a conversation.
[ 1 9 ] U s i n g t h e I n t e r f a c e
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Soft Key Function
"Soft" keys are keys that change function during the operation of the phone. There are two soft keys on
the handset and base.
The text right above the soft key indicates that key's current function. For example, when the phone is in
standby mode, pressing soft key 1 activates the LAND line. When the phone is in talk mode, pressing soft
key 1 brings up the options menu. Complete information on the features controlled by the soft keys can
be found under each feature.
In standby mode
Handset
In talk mode
6CNMꢀꢀꢀꢀꢀꢀꢃꢄꢃꢃ
ꢀ
ꢀꢁꢂꢃꢀꢄ570ꢄꢅꢀꢆꢅꢀ#
ꢀꢁꢀꢀꢀ8QNWOGꢀꢀꢀꢀꢂ
ꢄꢄ0GYꢄ%+&ꢆꢄꢅꢀ
.#0&
/1$+.'
126+105
/1$+.'
Soft key 1
Soft key 2
Soft key 1 Sof key 2
t
Base
52ꢀ2JQPG
ꢁ
/'55#)'
/'55#)'
570ꢀꢁꢂꢃꢄꢄ#
ꢀꢀꢀꢄꢁꢅꢄꢆꢅꢄꢇ
ꢀꢁꢁꢁ8QNWOGꢁꢁꢁꢂ
0
0
.#0&
/1$+.'
126+105
/1$+.'
Soft key 1 Soft key 2
Soft key 1 Soft key 2
w w w . u n i d e n . c o m
Using the Interface [ 2 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
To make menu selections, please follow the instructions below:
Press menu/select.
Highlight the option you want by pressing the up, down, right, or left key on the
handset, or up or down key on the base. This will move the cursor; the option
currently highlighted appears in reversed out text.
Select the highlighted option by pressing the menu/select key.
To exit the menu and return to standby, press the end key on the handset or the end/
find hs key on the base.
To go back a level in the menu, press the back/hold/int’com.
ꢀꢁ5RGCMGTꢁ5GVWR
5'.'%6
[ 2 1 ] U s i n g t h e I n t e r f a c e
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Entering text
You can use the number keypad on your
phone to enter text by referring to the
letters printed on each number key.
When you press the number key in a text
entry field, the phone displays the first
letter printed on the number key. Press
the number key twice to display the
second letter and three times to display
the third. Capital letters are displayed
first, then lower case letters, then the
number on the key.
If two letters in a row use the same
number key, enter the first letter, then
use the right and left key to move the
cursor to the next position to enter the
second letter.
For example, to enter Movies:
1) Press 6 once to enter M.
2) Use right or left key to move the cursor to the right.
3) Press 6 six times to enter o.
4) Press 8 six times to enter v.
5) Press 4 six times to enter i.
6) Press 3 five times to enter e.
7) Press 7 eight times to enter s.
8) Press menu/select to end your text entry.
If you make a mistake while entering a name, use right or left key to move the cursor to the incorrect character.
Press the DELETE soft key to erase the incorrect character, and then enter the correct character.
To delete all characters in the text entry field, press and hold the DELETE soft key.
w w w . u n i d e n . c o m
Using the Interface [ 2 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Options
On the handset, the options are DirectLink, Room Monitor, Messages, Reminder,
Speaker Setup, Display Options, Ringer Options, System Setup and Bluetooth.
ꢀꢁ5RGCMGTꢁ5GVWR
Note:
• If you do not press a key within 30 seconds, the phone will time out and exit the menu mode. When setting
Date and Time, the time-out period is extended to two minutes.
• All of these options can be configured in the Cordless Customization Application.
5'.'%6
Handset Main Menu Options
Messages
Display Options
Bluetooth
Direct Link
Room Monitor
Speaker Setup
System Setup
Ringer Options
Reminder
On the base, the options are Rings/Volumes, Caller ID, Redial, Phonebook, Room
ꢀꢀꢀꢁ1RVKQPU
4KPIUꢂ8QNWOGU
%CNNGTꢀ+&
/'55#)'
Monitor, Record Memo, System Setup, and Reconnect
.
0
5'.'%6
[ 2 3 ] M a i n M e n u O p t i o n s
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup Menu
note
System Setup
The following submenu options must be set separately for each
handset and the base.
Through this section we
use handset display
images for explanation.
Handset/Base
Mobile Priority
Mobile Priority allows you to set a default mobile phone for the
base and each handset. The priority mobile phone is automatically used when you
press the MOBILE soft key to make a call.
(System Setup)
Handset
(Base)
If you select a priority mobile phone, the handset or base will ring when the
priority mobile receives a call. If the non-priority mobile phone receives a call, the
handset or base displays incoming call, but it will not ring. If you want a handset
or base to ring when any paired mobile phone receives a call, set the mobile
priority to All.
Mobile
Priority
The handset and base will still ring when a land line call is received.
To set the mobile priority, go to Mobile Priority, and select a
/QDKNGꢀ2TKQTKV[
#NN
mobile or All from the list. A confirmation tone tells you that
ꢁꢀ/QO Uꢀ%GNN
the setting is active.
ꢂꢀ,CPG
ꢀ
5'.'%6
w w w . u n i d e n . c o m
System Setup Menu [ 2 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Contrast (For Base)
You can change the contrast of your base display to make
it easier to read. You might want to adjust the contrast
whenever you change the display color. Your phone gives
you 10 levels of contrast to choose from. To adjust the
contrast, go to LCD Contrast. Use up or right key to
ꢀ.%&ꢀ%QPVTCUV
ꢀꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢂ
/'55#)'
(System Setup)
0
Handset
(Base)
5'.'%6
increase the contrast and down or left key to decrease the contrast. When you like
LCD
Contrast
the level of contrast, press menu/select to select it.
Open to Answer (Handset only)
Open to Answer lets you answer the phone by opening the cover
of the handset. To turn on Open to Answer, go to Open to Answer
Open to
Answer
1RGPꢀVQꢀ#PUYGT
1P
1HH
and select On. A confirmation tone tells you that Open to
Answer is active.
ꢀ
5'.'%6
Any Key Answer (Handset only)
Any Key
Answer
Any Key Answer lets you answer the phone by pressing any key
#P[ꢀ-G[ꢀ#PUYGT
1P
on the number pad. To turn on Any Key Answer, go to Any Key
1HH
Answer and select On. A confirmation tone tells you that Any Key
Answer is active.
ꢀ
5'.'%6
[ 2 5 ] System Setup Menu
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Banner Display (Handset only)
You can change the name your phone displays on the screen. If
you have more than one handset, you can use the banner name
to identify your handset during handset-to-handset functions
like intercom and DirectLink. Go to Banner Display and enter the
name you want to use. You can use up to 10 characters. Use the
DELETE soft key to delete an existing handset name. Press
menu/select when you're finished.
$CPPGTꢀ&KURNC[
/QO Uꢀ2JQPꢀꢁꢂ
(System Setup)
Handset
(Base)
ꢀ
Banner
Display
&'.'6'
Key Touch Tone
Key Touch Tone is the tone your keypad makes when keys are
pressed.
Key Touch
Tone
-G[ꢀ6QWEJꢀ6QPG
1P
1HH
To turn off the tone, go to Key Touch Tone and select Off. A
confirmation tone tells you that the tone has been deactivated.
ꢀ
5'.'%6
Call Privacy
Call
Privacy
If you don't want other registered handsets and the base to
interrupt you on a call, you can turn on privacy mode. As long
as your handset or the base is in privacy mode, other handsets
won't be able to join your call or make any calls of their own. To
turn on privacy mode, go to Call Privacy and select On. You can
turn on privacy mode when the phone is in standby or when
you're already on a call. You will hear a confirmation tone.
%CNNꢀ2TKXCE[
1P
1HH
ꢀ
5'.'%6
w w w . u n i d e n . c o m
System Setup Menu [ 2 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Language (For Base)
You can change the language the menu display will use.
Choose from English, French, or Spanish. To change the
language, go to Language and select English, Franﾕais
(French), or Espaﾂol (Spanish). You'll hear a confirmation
tone, and the display will use the selected language.
ꢀꢀꢀꢀ.CPIWCIG
'PINKUJ
(TCPECKU
/'55#)'
(System Setup)
0
5'.'%6
Handset
(Base)
Language
Unique ID (Handset only)
You can assign special ringer tones to anyone in your
7PKSWGꢀ+&
Unique ID
1P
phonebook. When your phone gets a call, it looks up the Caller
ID information in your phonebook; if you've assigned a
distinctive ringer and pictures to that number, the phone uses it
so you know who's calling. To turn on distinctive ringing, go to
Unique ID and select On. A confirmation tone tells you that
distinctive ringing is active.
1HH
ꢀ
5'.'%6
When viewing a Caller ID entry, the picture that corresponds to the
Phonebook Unique ID setting appears. If the Unique ID is set to Off, the
phone uses default picture for viewing Caller ID entries.
[ 2 7 ] System Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Global Setup
note
Global settings apply to registered handsets and the base. If
you change something under the global menu, you change it for
all handsets and the base. Only one handset or the base can
change global settings at a time, and you have to make sure the
phone is not currently being used.
Some feature may not
supported by older
handset.
(System Setup)
Global
Date and Time
To change the date and time shown in the display, go to Date &
Time. Use the up, down, right, left keys to highlight the part you
want to change (date, time, AM/PM). Use the number keypad or
&CVGꢀꢁꢀ6KOG
ꢂꢃꢄꢅꢆꢄꢇꢂꢂꢃ
ꢋ
ꢅꢂꢈꢇꢉ2/ꢊ ꢌ#/ꢄ2/ꢍ
Date &
Time
/tone to change each part. Press menu/select when you're
*
finished.
ꢀ
Note: If you don't press any keys for two minutes when setting the date and time,
the phone will exit the menu mode.
w w w . u n i d e n . c o m
System Setup Menu [ 2 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting
Your phone supports Caller ID on Call Waiting, so you can see the name and number of
someone who calls when you're already on the line. Your phone also supports Call
Waiting Deluxe, which gives you a choice of how you want to handle a waiting call. You'll
need to subscribe to these features with your phone company before you can use them.
(System Setup)
Global
To let your phone support these features, go to Call Waiting.
Select On, and the phone will display the CallWaitDeluxe screen.
Select On. (You have to turn on Call Waiting before you can turn
on Call Waiting Deluxe.) A confirmation tone tells you that your
phone is ready to use these features.
%CNNꢀ9CKVKPI
Call
Waiting
1P
1HH
ꢀ
You can't turn off Call Waiting on your mobile line. To
disable Call Waiting on your mobile phone, refer to the
documentation provided with your mobile phone.
5'.'%6
Area Code
Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your
local area code in your phone. If you get a call from within your area code, you'll
only see the 7-digit phone number. If you get a call from outside your area code,
you'll see all 10 digits.
To enter an area code, go to Area Code. Use the number keypad
#TGCꢀ%QFG
ꢁꢂꢃ
to enter your 3-digit area code. Press menu/select when you're
finished.
ꢀ
&'.'6'
[ 2 9 ] System Setup Menu
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial Mode
Your phone can communicate with the telephone network in two different ways: tone
dialing and pulse dialing. These days, most phone networks use a method called tone
dialing, so your phone comes programmed for tone dialing.
(System Setup)
Global
If your phone company uses Pulse dialing, you'll need to change
&KCNꢀ/QFG
your phone's dial mode. There's an easy way to tell: try making a
6QPG
Dial Mode
2WNUG
call. If your call connects, your phone's setting is fine. If not, go
to Dial Mode and select Pulse. A confirmation tone tells you
you've changed the dial mode, and you can try making a call
again.
ꢀ
5'.'%6
Setting the Ringer Options
ꢀꢁ4KPIGTꢁ1RVKQPU
This menu lets you customize the Ringer or Speaker Volume
settings in your phone. You can set these options separately for
each handset and the base.
(Ringer Options)
(Base:Rings/Volumes)
Ringer Tone
Ringer Tones
5'.'%6
You can set a different ringer for each handset and the base.
This phone comes with 10 prerecorded songs and 15 different ringer tones; for the
handset you can also record your own ringer tones (see page 33).
w w w . u n i d e n . c o m
System Setup Menu [ 3 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
- Songs: Beethoven's Symphony #9 [Beethoven9], For Elise [Elise], Home Sweet Home [Hm
Swt Hm], Lorri Song #6 [Lorri Song], WT Overture (Handset only), Twinkle Star (Handset
only), Je Te Veux (Handset only) When the Irish Eyes Are Smiling [Irish Eyes] (Base
only), Aura Lee (Base only), Let Me Call You Sweet Heart [Sweetheart] (Base only), Star
Spangled Banner [Star Spngl], Old MacDonald [Old MacDld], We Wish You A Merry
Christmas [Merry-Xmas]
- Ringer tones: Flicker, Clatter, Coin Toss, Synthesize, Finish Line, Soft Alert, Wake Up,
Lighting Bug, Bebop, Tone Board, Chirp, Party Clap, Reminder, Burble, TeleTone
1) Go to Ringer Tones.
.CPFꢀQTꢀ/QDKNG!
ꢀꢀꢀꢁ(NKEMGT
2) Select the tel type, Land or Mobile.
ꢀꢀꢂꢁ'NKUGꢀ
3) Select a ringer from the list.
ꢀꢀꢃꢁ/GTT[ꢄ:OCU
As you scroll through the list, each ringer will sound. You'll hear
ꢀꢀ
a confirmation tone, and the phone will go back to the menu.
5'.'%6
[ 3 1 ] System Setup Menu
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Unique Ring (Base Only)
You can assign special ringer tones to anyone in your
phonebook. When your phone gets a call, it looks up the
Caller ID information in your phonebook; if you've
assigned a distinctive ringer to that number, the phone
uses it so you know who's calling.
ꢀꢀ7PKSWGꢀ4KPI
1P
1HH
(Ringer Options)
/'55#)'
(Base:Rings/Volumes)
0
5'.'%6
Unique Ring
To turn on distinctive ringing, go to Unique Ring and select On. A confirmation tone
tells you that Unique Ring is active.
Vibrate All (Handset Only)
Vibrate All
The vibrate alert causes the handset to vibrate when an
ꢀꢀꢀ8KDTCVGꢀ#NN
1P
incoming call is received. For safety reasons, the handset will
1HH
not vibrate while it is charging in base. To turn on the Vibrate
Alert, go to Vibrate All and select On. A confirmation tone tells
you that Vibrate Alert is active.
ꢀ
5'.'%6
w w w . u n i d e n . c o m
System Setup Menu [ 3 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Vibrate (Handset Only)
You can choose one of four different vibrate patterns. To set Call Vibrate, go to Call
Vibrate and select Tel Type (LAND or MOBILE), and then select the pattern.
Selecting OFF will turn off the vibrate feature for incoming calls only. A
confirmation tone tells you that Vibrate Pattern is active.
(Ringer Options)
Call Vibrate
Customize Your Own Distinctive Ringer Tones (Handset Only)
Rec/Edit
Rings
Your phone can store up to 5 different
recordings to use as ringer tones (a total of
100 seconds). Each recording must be less
than 20 seconds long.
To the
To the
sound source
headset jack
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or CD player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source.
You can also simply use the handset's microphone by holding the handset close
to the sound source.
[ 3 3 ] System Setup Menu
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Go to Rec/Edit Rings.
4GEQTFꢀ4KPIGT
9CKVKPIꢀVQ
4GEQTF
3) Select a location from 1-5, and press the OPTIONS soft key.
4) Use the up/down key to select Record. To start recording,
press the RECORD soft key. The message counter displays 20
and then begins to count down.
ꢁꢂ
5) When you are finished recording, press the STOP soft key. The
phone will play the recorded ringer. To re-record the ringer, press
the ReRec soft key while playing the ringer.
4'%14&
6) Enter the title of this ringer (up to 12 digits) using the number
keypad, or the DELETE soft key, right, or left key.
7) Press menu/select, you will hear a confirmation tone, and Done! appears.
Playing the Ringer
ꢀ1RVKQPU
2NC[
1) Go to Rec/Edit Rings.
%JCPIGꢁ6KVNG
&GNGVG
2) Select a ringer to play, and press the OPTIONS soft key.
3) Use the up/down key to select Play. To stop, press menu/select
or the STOP soft key.
ꢁ
5'.'%6
Change Ringer Name
1) Go to Rec/Edit Rings.
2) Select a ringer you want to change the title, and press the
OPTIONS soft key.
'PVGTꢀ6KVNG
1DNCꢁFK
3) Use the up/down key to select Change Title.
4) Edit the title of this ringer (up to 12 characters) using the
number keypad, the DELETE soft key, right, or left key.
When you are finished, press menu/select, you will hear a
confirmation tone, and Done! appears.
ꢀ
&'.'6'
w w w . u n i d e n . c o m
System Setup Menu [ 3 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting the Ringer
To delete a ringer tone, go to Rec/Edit Rings, and select the
ringer you want to delete. Press OPTIONS soft key. Use the up/
down key to select Delete. Select Yes. You will hear a
confirmation tone, and Deleted! appears. The ringer is deleted
from the list, and the phone stays on the ringer list.
ꢀ1RVKQPU
2NC[
%JCPIGꢁ6KVNG
&GNGVG
ꢁ
You can not delete the ringer if it's currently being used
for the default ringer tone, a Unique Ring setting, or a
Reminder.
5'.'%6
Display Settings (Handset Only)
The following submenu options must be set separately for each
handset.
ꢀꢁ&KURNC[1RVKQPU
(DisplayOptions)
Wall Paper
5'.'%6
Wallpaper/Image Displays (Handset Only)
Your phone has 34 preset wallpaper/images
9CNNꢀ2CRGT
0Qꢀ5GNGEVKQP
to choose from. You can customize or
7PKFGPꢀ.QIQ
replace 30 of these images using the
#PCNQIꢀ%NQEM
software application CD-ROM supplied with
this phone.
&KIKVCNꢀ%NQEM
%CNGPFGT
During standby mode the wallpaper will
display on the handset's LCD Screen. To set
your wallpaper, scroll through the Wall
EJGEMGTHNCI
ꢀ
8+'9
5'.'%6
[ 3 5 ] System Setup Menu
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper options, and press the VIEW soft key. Press menu/select to activate the
wallpaper of your choice.
Note: You can download images using the PC application CD-ROM and use them for your
wallpaper.
(DisplayOptions)
Color Scheme
Color Scheme (Handset Only)
You can change the color of your phone's display. There are 5
%QNQTꢀ5EJGOG
5M[ꢀ$NWG
different colors to choose from: Sky Blue, Haze Gray, Chic
*C\Gꢀ)TC[
Purple, Coral Red, and Lime Green.
%JKEꢀ2WTRNG
To change the color of the display, go to Color Scheme and select
%QTCNꢀ4GF
the color you want. As you scroll through the options, the phone
LCD Contrast
.KOGꢀ)TGGP
displays the highlighted color for you.
ꢀ
5'.'%6
LCD Contrast (for the Handset)
LCD Contrast adjusts the handset's display. To adjust the
.%&ꢀ%QPVTCEV
contrast, go to LCD Contrast and use the up, down, right, or left
key to adjust the contrast level you want. Press menu/select to
activate it. You will hear a confirmation tone.
ꢁꢂꢃꢄ
5'.'%6
w w w . u n i d e n . c o m
System Setup Menu [ 3 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Animation Type (Handset only)
Your phone has 4 different system animations (Dog, Car, Frog and Abstract) with 7
different animation schemes:
(DisplayOptions)
Animation Type
done
page
talk
batt-low
end
unavailable
delete
To set your animation type, scroll through Animation Type
options, and press the VIEW soft key. Press menu/select to
activate the animation type of your choice.
ꢀ#PKOCVKQPꢀ6[RG
0Qꢀ5GNGEVKQP
&QI
%CT
(TQI
#DUVTCEV
ꢀ
8+'9
5'.'%6
Language (for the Handset)
Language
You can change the language the menu display will use. Choose
from English, French, or Spanish. To change the language, go to
Language and select English, Franﾕais (French), or Espaﾂol
(Spanish). You'll hear a confirmation tone, and the display will
use the selected language.
.CPIWCIG
'PINKUJ
(TCP㩟CKU
'URC㩌QN
ꢀ
5'.'%6
[ 3 7 ] System Setup Menu
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bluetooth Feature
note
Registering a Mobile Phone to the Main Base Unit
Your phone can pair with Bluetooth v 1.1 compliant mobile phones so you can use
your mobile line in addition to the usual land line. This lets you answer your mobile
phone from any of your home phone handsets or use any free long distance minutes
from your mobile plan on your home phone. You only have to pair your mobile
phone to the base once. The base can support two paired Bluetooth devices.
•If no Bluetooth phone
with Bluetooth Device
was found, Bluetooth
Dfoeuvnidc.e awpapseanrost.
•To cancel searching,
press the STOP soft
key.
Only one mobile line can make or receive a call at a time.
The phone provides two different ways of pairing: Search Device and Find Me. Check
your mobile phone's owner's manual to decide which method is best for your mobile.
a. Search Device
1) Activate the Bluetooth option on your mobile phone according to the owner's
manual.
2) With the ELBT595 in standby mode (not in use), press
ꢀꢁ5[UVGOꢀ5GVWR
)NQDCN
ꢀꢀ$NWGVQQVJ
/'55#)'
menu/select on the base.
3) Use the up/down key to scroll through options and
select System Setup.
0
/'55#)'
0
5'.'%6
4) Use the up/down key to scroll through System Setup
5GNGEVꢀꢀꢀ/QDKNG
ꢁꢂ'ORV[
ꢃꢂ'ORV[
and select Bluetooth.
5) Select Select
Mobile.
6) Select an empty slot and press the OPTIONS soft key.
126+105
w w w . u n i d e n . c o m
Using the Bluetooth Feature [ 3 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
7) Select Search
Device. The phone will search for
ꢀꢀꢀꢁ1RVKQPU
5GCTEJꢀꢀ&GXKEG
(KPFꢀ/G
/'55#)'
Bluetooth mobile phones and display the first six
mobile phones found.
0
5'.'%6
To cancel the search, press the stop soft key. If no
device is found, Bluetooth Device was not found
appears.
ꢀꢀꢀ2CKTꢀYKVJꢁ
/16141.#ꢀ8ꢂꢃꢃ
0QMKCꢀꢂꢂꢄꢃ
/'55#)'
0
%100'%6
8) Use the up/down key to select a device to connect,
and then press menu/select.
9) Scroll to the mobile phone you want to pair with the
ELBT595, and press the CONNECT softkey.
10)Using the mobile phone, enter the PIN code "0000."
'PVGTꢀ2KPꢀ%QFG
HQTꢀ2CKTKPI
2+0ꢁꢂꢂꢂꢂ
/'55#)'
0
When pairing is completed, you will hear a confirmation
tone, and Pairing succesful! appears on the base. If pairing failed, Pairing
failed. Try again appears.
b. Pair/Find Me
1) Follow the step 2) - 6) under "a. Search Device. " on page 38.
2) Select Find Me.
3) On your mobile phone, perform Search Device and select "Uniden ELBT 595."
4) On the mobile, enter the pin code "0000". Connecting appears on the base unit
display.
When pairing is completed successfully, you will hear a confirmation tone, and
Pairing succesful! appears on the base. If pairing failed, Pairing failed. Try
again. appears.
[ 3 9 ] Using the Bluetooth Feature
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
De-registering the Mobile Phone
note
1) When the phone is in standby mode, press menu/select on the base.
2) Select System Setup menu, and then
Bluetooth.
3) Use the up/down key to select Select
Mobile, and then press menu/select.
If you de-register the
priority mobile
phone, go to the
Mobile Priority menu
and select a different
mobile phone (see
page 24).
4) To delete individual Mobile phone, use the up/down
key to select a Mobile phone to be de-registered and
press the OPTIONS soft key.
5GNGEVꢀꢀꢀ/QDKNG
ꢁꢂ/16141.#ꢀ8ꢃꢄꢄ
ꢅꢂ0QMKCꢀꢃꢃꢆꢄ
/'55#)'
0
126+105
5) Use the up/down key to select Deregister
or
ꢀꢀꢀꢁ1RVKQPU
/'55#)'
0
Deregister All
to de-register all, and then press
'FKVꢀ0COG
>GIKUVGT
menu/select.
6) Use the up/down key to select Yes, and then press
5'.'%6
menu/select.
When the de-registration is complete, you will hear a confirmation tone, and
Deregistration successful! appears.
w w w . u n i d e n . c o m
Using the Bluetooth Feature [ 4 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing the Mobile Name
You can store and edit names of registered Mobile phones.
1) When the phone is in standby mode, press menu/select
5GNGEVꢀꢀꢀ/QDKNG
ꢁꢂ/16141.#ꢀ8ꢃꢄꢄ
ꢅꢂ0QMKCꢀꢃꢃꢆꢄ
/'55#)'
0
on the base.
2) Select System Setup menu, and then select
126+105
Bluetooth.
3) Use the up/down key to select Select
Mobile, and
ꢀꢀꢀꢁ1RVKQPU
'FKVꢀ0COG
>GIKUVGT
then press menu/select.
/'55#)'
0
4) Use the up/down key to select a Mobile phone to edit
the name, and press the OPTIONS soft key.
5) Use the up/down key to select Edit Name and then
press menu/select.
5'.'%6
6) Enter or edit the name using the number keypad, the
DELETE soft key, and right and left key.
7) When you are finished, press menu/select. You will hear
a confirmation tone, and Done! appears.
[ 4 1 ] Using the Bluetooth Feature
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Mobile Ring Tone (Base Only)
This feature allows the phone to use the ringer of the mobile phone when receiving
a call to the mobile phone.
note
1) When the phone is in standby mode, press menu/select
/QDKNGꢀ4KPIꢀ6QPG
1P
1HH
/'55#)'
on the base.
2) Select System Setup menu, and then
3) Use the up/down key to select Mobile Ring Tone, and
then press menu/select.
4) Use the up/down key to select on or off, and then
press menu/select.
If you turn on the
mobile ringer, the
unique ringer feature
will be disabled.
Bluetooth.
0
/'55#)'
0
5'.'%6
#TGꢀ[QWꢀUWTG!
ꢁQXGTTKFGUꢀCP[
7PKSWGꢀ4KPIGTUꢂ
5) Press the YES or NO soft key.
01
;'5
Viewing Bluetooth Properties of the Base
To see property of the base, follow the steps below:
1) When the phone is in standby mode, press menu/select
7PKFGPꢀ'.$6ꢁꢂꢁ
ꢃꢄꢄꢅꢆ&ꢇ(((ꢆꢇ
2+0ꢈꢄꢄꢄꢄ
/'55#)'
on the base.
2) Select System Setup menu, and then
Bluetooth.
0
3) Use the up/down key to select My Base Unit, and then
press menu/select.
The phone displays the property of the base.
To go back to the Bluetooth setup Menu, press back/hold/int’com.
w w w . u n i d e n . c o m
Using the Bluetooth Feature [ 4 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Reconnect
If you set this feature to on, the phone will search for the paired mobiles once
every minute.
1) When the phone is in standby mode, press menu/
#WVQꢀ4GEQPPGEV
1P
1HH
/'55#)'
select on the base.
2) Select System Setup menu, and then
Bluetooth.
0
5'.'%6
3) Use the up/down key to select Auto Reconnect
, and
then press menu/select.
4) Use the up/down key to select On or Off, and then press menu/select.
Reconnect Mobile
This feature allows the phone to reconnect to a paired
ꢀ1RVKQPU
5[UVGOꢁ5GVWR
4GEQPPGEV
/'55#)'
0
mobile.
5'.'%6
ꢀꢀꢀꢀ%QPPGEVKPI
1) When the phone is in standby mode, press menu/
select on the base.
2) Select Reconnect
, and then press menu/select.
/'55#)'
0
Connecting will appear.
When the connection is complete, appears next to
*
the name of the device connected.
[ 4 3 ] Using the Bluetooth Feature
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Bluetooth Headset (Handset Only)
The phone also supports Bluetooth v 1.1 compliant headsets. Please visit our web
site for more detailed information about Bluetooth compatibility and
troubleshooting tips.
note
•Even if the handset
ringer is turned off or
if DND mode is turned
on, a paired Bluetooth
headset will still ring.
Before you can use a bluetooth headset, you must pair it with the phone. Once you
have paired your headset with the phone, you do not have to pair it again until you
want to use it with another phone.
•The Bluetooth
headsets must stay
within 15 feet (5m)
range of the cordless
handset.
Registering the bluetooth headset
1) Prepare your bluetooth headset for pairing according to the
ꢀ$NWGVQQVJ
headset's owner's manual on pairing.
ꢁꢂ(KPFꢃ2CKT
•If no device is
detected, Bluetooth
Dfeouvnidc.eawpapseanrso,tand
the phone goes back to
the Bluetooth setup
menu.
ꢄꢂ/[ꢂ*CPFUGV
2) With the phone in standby mode (not in use), press menu/
select on the handset.
3) Select the Bluetooth icon on the handset's main menu
display.
ꢂ
4) Use the up/down key to select Find/Pair , and then press
5'.'%6
menu/select.
(KPFꢀꢀ&GXKEG
The ELBT595 will begin to search for a bluetooth device.
Once detected, the headset's name will appear in the handset's
display.
(QWPFꢀꢁ
Press the STOP soft key to back to show the list of the bluetooth
headsets.
5612
w w w . u n i d e n . c o m
Using the Bluetooth Feature [ 4 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Scroll to a headset you want to pair with the ELBT595
handset, and press the SELECT soft key.
6) Using the cordless handset, enter your headset's PIN code.
7) Press the CONNECT soft key.
2CKTꢀYKVJꢁ
/QVQNQTCꢀ*5ꢂꢃꢄ
2NCPVTQPKEU/ꢅꢄꢄꢄ
When pairing is completed, you will hear a confirmation tone,
and Pairing successful! appears on the handset. If pairing
failed, Pairing failed. Try again. appears.
ꢆꢄꢃꢇꢅꢈꢉꢊꢋꢂꢌ#$
5'.'%6
2CKTꢀYKVJꢁ
/QVQNQTCꢀ*5ꢂꢃꢄ
ꢀꢀꢀ2KPꢀ%QFG
ꢀꢀꢀꢀꢀꢄꢄꢄꢄ
%100'%6
Viewing Paired Headsets
To review headsets paired to this cordless handset, follow the steps below:
1) When the phone is in standby mode, press menu/select on the handset.
2) Select the Bluetooth icon.
3) Use the up/down key to select Headset, and then press menu/select.
The headset name and serial number are displayed.
To go back to the Bluetooth setting display, press back/hold/int'com.
[ 4 5 ] Using the Bluetooth Feature
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Bluetooth Properties of the Handset
To view the handset information, follow the following steps:
1) When the phone is in standby mode, press menu/select on the handset.
2) Select the Bluetooth icon.
3) Use the up/down key to select My Handset, and then press menu/select. The
handset name and serial number are displayed.
To go back to the Bluetooth setting display, press back/hold/int'com.
Turning Bluetooth ON or OFF
The Bluetooth connection still uses power even when you're not currently using a
Bluetooth device. To save power, you can turn off the Bluetooth connection when
it's not in use.
1) When the phone is in standby mode, press menu/select on the
ꢀ$NWGVQQVJ
ꢁꢂꢂ1Pꢃ1HH
handset.
ꢄꢂꢂ*GCFUGV
2) Select the Bluetooth icon.
ꢅ /[ꢂ*CPFUGV
3) Use the up/down key to select On/Off, and then press
menu/select.
4) Use the up/down key to select On or Off, and then press
10
menu/select.
5'.'%6
To go back to the Bluetooth setting display, press back/hold/int'com.
w w w . u n i d e n . c o m
Using the Bluetooth Feature [ 4 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
To reconnect the Bluetooth Headset
If a paired headset will not connect to the handset, you can reconnect to the
headset.
1) When the phone is in standby mode, press menu/select on the handset.
2) Select the Bluetooth icon.
3) Use the up/down key to select
Headset, and then press menu/select.
*GCFUGV
/QVQNQTCꢀ*5ꢁꢂꢃ
4) Press the OPTIONS soft key and select Reconnect
.
5) Use the up/down key to select Yes, and then press menu/
select.
You will hear a confirmation tone, and Done! appears.
126+105
De-register the Bluetooth Headset
ꢀ1RVKQPU
4GEQPPGEV
>GIKUVGT
If you want to stop using a paired headset completely, you can
deregister it; this will allow you to pair another headset in the
future. You can also try deregistering and re-pairing a headset if
you can't connect to it.
1) When the phone is in standby mode, press menu/select on
the handset.
2) Select the Bluetooth icon.
5'.'%6
3) Use the up/down key to select
Headset, and then press menu/select.
4) Press the OPTIONS soft key and select Deregister
.
5) Use the up/down key to select Yes, and then press menu/select.
You will hear a confirmation tone, and Deregistration successful! appears.
[ 4 7 ] Using the Bluetooth Feature
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone
note
If you have a Bluetooth v1.1 compliant mobile phone and register it to the base,
you can make or receive a call through the mobile line as well as the normal land
line. To use the mobile line, press the MOBILE soft key. The two lines will be
completely independent on your phone. For example, you can have one handset
talking on LAND line while another handset and the base unit participate in a 3-
way conference on the mobile line.
•Before using a mobile
line, you need to
register the mobile
phone to the base (see
page 38).
•When you dial a
number with the
handset in standby
mode, hyphens are
inserted between
numbers.
•You can not make or receive a land line call using a Bluetooth mobile phone.
•A Bluetooth mobile phone will not ring when the ELBT595 receives a land line call.
From the Handset
•If the line is already in
use, all other
registered handsets
and the base display
"In Use."
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Press talk/flash or the LAND soft key.
For mobile line connection, press the MOBILE soft key.
Use the up/down key to select the Mobile phone you
want to use and press the CONNECT soft key.
4) Dial the number.
OR
w w w . u n i d e n . c o m
Using Your Phone [ 4 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Dial the number.
note
If you need the phone to pause before dialing more digits (for example, to enter
•In the list for mobile
line, select the mobile
marked with *.
an access code or extension), press menu/select, and select Pause Entry from
the list.
P
appears in the display.
A mobile without *
beside it is out of
range.
4) Press talk/flash or the LAND soft key for Land line.
•When making a call
using the mobile line,
you must dial the
For Mobile line connection, press the MOBILE soft key. Use the up/down key to
select the Mobile phone you want to use and press the CONNECT soft key.
number in 10 seconds,
or the phone return to
standby mode.
From the Handset Speakerphone
1) Remove the handset from the charging cradle.
•For best performance,
use the speaker phone
in a quiet room and let
the caller finish
speaking before you
speak. If you or the
other party has
difficulty hearing,
adjust the speaker
volume.
2) Flip the top panel up.
3) Press (Speaker Phone) on the side of the handset.
4) Listen for the dial tone.
5) Dial the number.
6) When the other party answers, talk into the microphone
in the bottom of the handset.
[ 4 9 ] Using Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
From the base
1) Press /flash or the LAND soft key.
For Mobile line connection, press the MOBILE soft key. Use
the up/down key to select the Mobile phone you want to use
and press the CONNECT soft key.
note
•If Open to Answer is
on, the phone will
automatically answer
the call when you flip
the top panel up (see
page 25 for setting).
2) Dial the number.
OR
1) Dial the number.
•If Any Key Answer is
on, you can also press
any number key on the
keypad to answer a call
(see page 25 for
If you need the phone to pause before dialing more digits (for example, to enter
the list.
P
appears in the display, which represents a 2-second pause.
2) Press /flash. For Mobile line connection, press the MOBILE soft key. Use the
up/down key to select the Mobile phone you want to use and press the CONNECT
soft key.
setting).
•If you set mobile
priority on the base or
a handset, it will
automatically connect
to the priority mobile
when you press the
MOBILE soft key.
Receiving a call/AutoTalk set to Off
Handset is in the cradle
Handset is off the cradle
•Make sure the Auto
Answer feature on your
Bluetooth mobile
1) Remove the handset from the
charging cradle.
2) Flip the top panel up.
3) Press talk/flash or the corresponding
soft key (LAND or MOBILE).
1) Flip the top panel up.
2) Press talk/flash or the corresponding
soft key (LAND or MOBILE).
phone is turned off. If
AutoAnswer is on, your
mobile may answer the
call and interrupt your
ELBT595. If this
happens, the ELBT595
will place the call on
hold.
w w w . u n i d e n . c o m
Using Your Phone [ 5 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
From the base
Press /flash or the corresponding soft key (LAND or MOBILE).
note
Hanging Up
•While using the
From the handset or handset speakerphone, press end or close the top panel.
From the base, end/find hs.
handset speaker phone
or a headset, closing
the top panel will not
hang up the call.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press (speaker phone) on the side of
the handset. To switch from a speakerphone call to a normal call, press (speaker
phone).
•To scroll through the
help, press the >>| soft
key or the right key.
Moving out of range
If you move your handset farther from the base unit during a call, you might start
to hear more noise than usual. If you go too far from the base, you'll hear a beep
and see No Signal Press HELP. Press the HELP soft key on the display.
[ 5 1 ] Using Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Waiting
If you hear a call waiting tone while you're on a call, press talk/flash or /flash
on the base to switch to the new call. After a short pause, you'll hear the new
caller. Press talk/flash or /flash on the base again to go back to the original
caller.
note
•You must subscribe
through your local
telephone company to
receive Call Waiting or
Caller ID on call
Call Waiting Deluxe
If you subscribe to Call Waiting Deluxe (CWDX) from your phone
ꢀꢁ%CNNꢀ1RVKQPU
ꢂꢀ/WVG
company, you have several different options when you get a call
waiting service.
ꢃꢀ%CNN9CKV&GNWZG
waiting call. When you hear the call waiting tone, instead of
•Your phone can't show
call waiting caller ID
information when a
call is on hold.
ꢄꢀꢀꢀꢀꢀ%QPHGTGPEG
answering the call, you can press menu/select or the OPTIONS
ꢅꢀ%CNNꢀ4GEQTF
soft key, and then select CallWaitDeluxe. Then, use the up/down
ꢆꢀ#WFKQꢀ6QPG
key or press 1-7 (1-4 for Mobile line) to choose from the
ꢇꢀ%CNNꢀ2TKXCE[
following options:
On a LAND line, On a MOBILE line,
Option
Definition
press
press
Ask to Hold
A prerecorded message tells the caller that you'll
be available shortly, and the call is place on hold.
1
-
A prerecorded message tells the caller you are busy, and
the waiting call is disconnected.
Tell Busy
2
3
1
Forward
The caller is sent to your voice mail box, if available.
-
Answer/Drop 1
Conference
Disconnects the first call, and connects to the new caller. 4
2
4
Starts a conference call with your first and second callers.
5
During a conference call, allows you to choose to drop the
first or last caller.
Drop First/Drop Last
Answer/Hold 1
6 / 7
-
Releases all active calls (if any exist) and accepts the
other (held or waiting) call
-
3
w w w . u n i d e n . c o m
Using Your Phone [ 5 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Placing a Call on Hold
From the handset
note
During a call, press back/hold/int'com, and then end to
put the call on hold. Press talk/flash to go back to the
call.
ꢀꢁꢂꢃꢀꢄ570ꢄꢅꢀꢆꢅꢀ#
ꢄꢄ*QNF
•If you leave a call on
hold for more than 5
minutes, warning tone
sounds and Hold
Rheelmidndleinr!e aApnpsewaerrs,
and the line will
disconnect in 15
seconds.
From the base
During a call, press back/hold/int'com, and then end/
find hs to put the call on hold. Press /flash to go back
to the call.
ꢄꢄ.#0&
ꢄꢄ/1$+.'
/'55#)'
570ꢀꢁꢂꢃꢄꢄ#
*QNF
0
.#0&
/1$+.'
•If someone is using
another handset or the
base in Privacy Mode,
Unavailable appears
in the display and you
cannot join the call.
Conferencing
If you have two handsets and the MOBILE line, up to five people can participate in
a conference call. A five-way conference call consists of
Outside Line (LAND) + Outside Line (MOBILE) + Base +
Two Handsets.
Only two handsets can participate in any conference call.
Joining a Conference Call
You can easily join a call already in progress.
[ 5 3 ] Using Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
From the base
1) Press corresponding soft key (LAND or MOBILE) on the base to join the
note
conference call.
2) To hang up, press end/find hs on the base. The handset(s) will still be connected
to the call.
During a line
conference with
LAND/MOBILE, mobile
transfer, flash,
From a second handset
1) Press corresponding soft key (LAND or MOBILE) on the handset to join the call.
2) To hang up, return the handset to the cradle, or press end on the handset. The
base or other handset will still be connected to the call.
dialing, CWDX,
phonebook/caller ID/
redial operations are
not available.
Conferencing with one outside line
To hold a conference call with one outside line, simply have the handsets or base
join the call.
Conferencing two outside lines (LAND / MOBILE)
Follow the steps below to allow both outside lines to participate in a conference
call:
1) During a call, press back/hold/int’com, and then end or end/find hs on the base
to put the first caller on hold.
2) Press the line soft key (LAND or MOBILE) for a free line to make or answer a
second call.
3) When the second call is connected, press menu/select and select
%QPHGTGPEG
to initiate a conference call.
4) To disconnect a single caller, press the corresponding soft key (LAND or MOBILE)
to place the caller you wish to keep speaking to on hold and then press end or
end/find hs to hang up the other caller.
w w w . u n i d e n . c o m
Using Your Phone [ 5 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
For example, to hang up the MOBILE line but leave the LAND line connected:
- Press the MOBILE soft key to put the LAND line on hold.
- Press end or end/find hs to hang up the MOBILE line.
- Press the LAND soft key to take the LAND line off hold and continue the
conversation.
note
You can reject a call
to a mobile line by
pressing
key
To hang up both lines, press end or end/find hs with the two line connected.
when the phone is
ringing.
Mobile Line Transfer
The phone allows you to transfer a mobile line call to your mobile phone, or receive
a mobile line call from your mobile phone.
From your mobile phone to ELBT595 phone
Press the MOBILE soft key on the ELBT595 phone during a call with your mobile
handset, and then the CONNECT soft key.
From the ELBT595 phone to your mobile phone
Press menu/select during a mobile line call, and select Transfer>Mobile.
Transferred appears and the ELBT595 phone return to standby mode.
[ 5 5 ] Using Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing Calls
You can quickly redial the last 20 phone numbers for each
handset and 10 numbers for the base.
note
1) With the phone in standby mode, press redial/ on the
handset (or press menu/select, and then select Redial
on the base). This brings up the redial list. Use the up/
down key to scroll through the numbers, and select the
number you want to dial.
•Each redial record can
store up to 32 digits.
•To store redial numbers
in the Phonebook, see
page 66.
ꢀ4GFKCN
ꢁꢁꢁꢂꢁꢁꢁꢂꢁꢁꢁꢁ
ꢃꢄꢁꢅꢆꢇꢈꢉꢊꢋꢃꢄꢁꢅꢆꢌꢌ
ꢃꢃꢃꢂꢃꢃꢃꢂꢃꢃꢃꢃ
ꢄꢄꢄꢂꢄꢄꢄꢂꢄꢄꢄꢄ
ꢃꢂꢉꢃꢈꢂꢉꢆꢉꢂꢁꢁꢋꢋ
ꢃꢋꢃꢂꢃꢋꢃꢂꢃꢋꢃꢋ
2) Press the LAND soft key, talk/flash (or ) or the CALL soft
key or /flash on the base to dial the selected number.
key, then MOBILE soft key. Use the up/down key to select the
Mobile phone to use and press CONNECT soft key.
%#..
126+105
You can also display the redial list for redial number with the
phone in talk mode. After selecting the redial number, press the
DIAL soft key to redial the number.
Deleting Redial Records
If you want to delete a phone number from the redial list, go to the redial list in
standby mode, and select the number you want to delete. Press the OPTIONS soft
key, and select Delete Selection. Use the up/down key to move the cursor to Yes.
Press menu/select. If you want to delete all the redial records, select Delete All,
and then Yes. Press menu/select.
w w w . u n i d e n . c o m
Using Your Phone [ 5 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Base Ringer and Speaker Volumes
Adjusting the base ringer volume
You can choose from three ringer settings on the base: off, low,
and high. When the phone is in standby mode, go to the Rings/
Volumes menu, and then select Ringer Volume. Use the up or down
key to select the Tel type (LAND or MOBILE), and press menu/
select. Use the up, down, right, or left key to select the ringer
volume, and press menu/select. You will hear a confirmation
tone.
Adjusting the base speaker volume
You can adjust the volume of the answering machine speaker while a message is
playing. Press the volume up/down key during a message to choose one of the 10
volume levels.
You can also set the speaker volume from the menu. Go to Rings/Volumes menu, and
then select Speaker Volume. Use the up, down, right, or left key to select the
speaker volume, and then press the menu/select. You will hear a confirmation tone.
[ 5 7 ] Using Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Handset Volume Setting Menu
Ringer: Adjust the handset ringer volume
4KPIGTꢀ8QNWOG
ꢀꢁ4KPIGTꢁ1RVKQPU
You can choose from three different ringer
volume settings on your handset: off, low,
and high. When the phone is in standby
mode, go to the Ringer Options menu, and
then select Ringer Volume. Use the up, down,
right, or left key to select the Tel type (LAND
or MOBILE), and press menu/select. Use the
up/down key to select the ringer volume, and
press the menu/select. You will hear a
confirmation tone.
*KIJ
ꢀꢀꢀꢀꢀꢀ
5'.'%6
5'.'%6
Ear speaker: Adjust the handset earpiece
volume.
ꢀꢁ5RGCMGTꢁ5GVWR
'CTRKGEG
You can choose from six volume levels for the
earpiece speaker. To adjust the earpiece
volume, go to Speaker Setup menu, and select
Earpiece Volume and select the volume level
you want to use.
ꢀꢁꢀꢀꢀ8QNWOGꢀꢀꢀꢀꢂ
5'.'%6
5'.'%6
You can also adjust the earpiece volume
during a call by pressing the or key on
the side of the handset, and then up (to
make it louder) or down (to make it softer).
w w w . u n i d e n . c o m
Using Your Phone [ 5 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker: Adjust the handset speaker volume
You can choose from six volume levels for the handset
speakerphone. To adjust the speaker volume, go to Speaker Setup
menu, and select Speaker Volume select the volume level you want
to use.
5RGCMGT
(Speaker Setup)
Speaker Volume
ꢀꢁꢀꢀꢀ8QNWOGꢀꢀꢀꢀꢂ
5'.'%6
You can also adjust the handset speaker volume during a call by
pressing the or key on the side of the handset, and then up
(to make it louder) or down (to make it softer).
Audio Tone
Audio Tone
If you aren't satisfied with the audio quality of your phone, you
can adjust the Audio Tone of the earpiece. Your phone gives you
three audio tone options: low, natural or high. Go to Speaker
Setup menu, and select Audio Tone and select the option that
sounds best to you.
(Audio tone adjustments only apply to the earpiece, not the
speakerphone.)
#WFKQꢀ6QPG
.QYꢀ6QPG
ꢀꢀꢀꢀ
5'.'%6
Mute
While the handset is ringing, you can mute the handset ringer for this call by
note
pressing end on the handset. To mute the base ringer, press
or end/find hs on
the base. The phone will ring again on the next call.
You can only mute the
handset ringer if the
handset is off the base
when the phone starts
ringing.
Mute the Microphone
When you're on the phone, press menu/select and select Mute to turn off the
microphone so the caller can't hear you. The display shows Mute On while the
microphone is muted. To turn off muting, repeat the above step again.
[ 5 9 ] Using Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone Dialing Switch Over
If your telephone company uses pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as telephone bank tellers,
telephone prescription refills, customer support menus,
etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press the /tone key. Any digits you enter from
*
then on will be sent as tone digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
Privacy Mode
Privacy mode prevents interruption from other registered
6CNMꢀꢀꢀꢀꢀꢀꢀꢀꢁꢂꢁꢃ
handsets or the base. This works only when the phone is in use.
While on a call, press the OPTIONS soft key on the handset or
ꢀ
base. Use the up/down key to select Call Privacy. Privacy Mode
2TKXCE[ꢀ/QFGꢀ1P
ꢀ
On appears in the display. To exit Privacy Mode, use the same
ꢀ
procedure. Privacy Mode Off appears.
126+105
/1$+.'
Find Handset
To locate the handset, press end/find hs on the base when the
phone is in standby mode. Select the handset to page. The
handset beep for 60 seconds, and Paging appears on the handset
display. To cancel paging, press any key on the handset or end/
find hs on the base.
w w w . u n i d e n . c o m
Using Your Phone [ 6 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Reminder (Handset only)
The Date & Time must be set to use the Calendar features. To set the Date &
note
!
Time, scroll to Global in the System Setup option (see page 24).
Your phone has a built-in calendar that you can use to schedule
reminders and appointments (all the way through December 31,
2099). You can set alarms for up to 30 different events.
A pop-up screen appears and reminder tone sounds when the
scheduled time & date comes. To show detailed info on the
reminder, press the VIEW soft key. To mute the reminder tone,
press the MUTE key.
Before using this
feature, you must set
the date and time (see
page 24).
To reset the reminder and clear the screen, press end when
reminder tone stops. To dismiss Reminder display press DISMISS
appears. Press the DISMISS soft key. The phone return to
standby mode.
Scheduling a reminder
ꢀ4GOKPFGT
ꢁꢁꢁꢁ
Select the Reminder option to show Reminder (Calendar). Today
is highlighted. If the reminder is set for the morning, a bar
appears in the lower left of the date number; if the reminder is
set for the afternoon or evening, a bar appears in the lower
right of the date number. Use up, down, right or left key to
move the cursor to the date.
ꢂꢃꢃꢄꢁ/C[
ꢁ
5%*'&7.'
[ 6 1 ] Using Your Phone
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
1) Press menu/select to select a day.
ꢀꢁꢂꢃꢄꢁꢃꢅꢁꢁꢆꢀ/10
ꢀ
2) Press the STORE soft key to add a reminder.
3) Press menu/select to set the date and time.
4) Use the number keypad or /tone to select the hours and
*
minutes. Press menu/select when you're finished.
5) To change the title, select and press menu/select.
Use the number keypad, left, right key, and the DELETE soft
key. Press menu/select when you're finished.
5614'
6) If you want to set recurrence, select , and press menu/select. Select the
frequency of the recurrence (None, Daily, Weekly, Monthly, Yearly) from the list.
Press menu/select when you're finished.
7) If you want your phone to ring when this reminder occurs, move to the line
,
and press menu/select. Select the ringer tone you want the phone to ring. Press
menu/select when you're finished.
8) To enter a description for this reminder, select and press menu/select. Edit
Message appears. You can enter up to 80 characters. Press menu/select when
you're finished.
9) When everything is correct, press the DONE soft key.
Editing and deleting reminders
You can edit reminders by pressing the SCHEDULE soft key, then
ꢀ4GOKPFGT
ꢁꢁꢁꢁ
select the reminder and press the OPTIONS key. Select Edit
Selection, and you can edit the date, time, reminder tone, and
text the same way you entered them for a new entry.
To delete reminders, select the reminder and press the OPTIONS
soft key. Select Delete Selection. To delete all reminders, select
Delete All.
ꢂꢃꢃꢄꢁ/C[
ꢁ
5%*'&7.'
w w w . u n i d e n . c o m
Using Your Phone [ 6 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Phonebook
Your phone lets you store up to 100 entries in each handset and base. You can store
up to 4 phone numbers for each name in your phonebook (for a total of 400
numbers), and you can assign names to groups for easy searching. You can store a
distinctive ringer tone and picture display, to your each or group.
You can enter your phonebook by pressing the left key
on the handset or base.
Creating and Editing Phonebook Entries
Press left key and press the STORE soft key for the first entry. From the 2nd entry
on, press the left key, and then the OPTIONS soft key. Select New Entry to store, or
Edit Selection to edit the location. Enter as much of the following information as
you want. Press menu/select to enter each entry and confirm the selection. When
you're finished, press the DONE soft key to save this phonebook entry.
[ 6 3 ] Using the Phonebook
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Name
Select
,
ꢀ'FKVꢁ2JQPGDQQM
ꢁꢁ0Qꢁ0COG
,
and use the keypad to enter the name for
note
this entry. You can enter up to 16 characters. If you don't
want to enter a name, your phone will store this entry as
No Name. Press menu/select when you're finished, and
your phone will go back to the current phonebook entry.
ꢁꢁ0Qꢁ0WODGT
ꢁꢁ0Qꢁ0WODGTꢁ
ꢁꢁ0Qꢁ0WODGTꢁ
ꢁꢁ0Qꢁ0WODGT
ꢁꢁ0Qꢁ5GNGEVKQP
5'.'%6
Step 2: Number
,
Select and enter a phone number for this entry.
,
ꢀ'FKVꢁ2JQPGDQQM
ꢁꢁ0Qꢁ0COG
ꢁꢁ0Qꢁ0WODGT
/'55#)'
If you need your phone to pause between digits when it's
dialing (for example, to enter an extension or an access
code), press the PAUSE soft key to insert a two-second
0
5'.'%6
pause. You'll see a
P
in the display. You can stack more
than one pause together if two seconds isn't long enough. Each pause counts as
one digit; you can enter up to 20 digits for the phone number. Press menu/select
when you're finished.
You can save up to 4
numbers for each
phonebook entry.
You'll have to delete one
of the existing numbers
before you add a new
one.
You can select an icon to remind you which number this is: home
,
, work
,
, mobile , , or general phone number . Press menu/select when you're
finished.
Step 3: Unique Ring
,
Select
,
to attach a special ring to this phone. Select the ringer tone you want
the phone to use when this person calls, or select No Selection to have the phone
use its regular ringer tone. Press menu/select when you're finished, and your phone
will go back to the current phonebook entry.
w w w . u n i d e n . c o m
Using the Phonebook [ 6 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Unique Display (Handset only)
Select
to attach a special screen display to this entry. Select the display you
want the phone to use when this person calls, or select No Selection to have the
phone use its regular display. You can press the VIEW soft key to see the display
choices:
Press menu/select when you're finished, and your phone will go back to the current
phonebook entry.
Step 5: Group
Select
,
,
to place this entry into a phonebook group. Select the group (0-9)
you want this entry to belong to, or select No Selection to leave the entry outside
of any group. Press menu/select when you're finished, and your phone will go back
to the current phonebook entry. See page 69 for information on creating and
editing groups.
Step 6: Speed Dial
,
Select 0-9 to save this number to one of the 10 speed dial numbers or No Selection
if you don't want to save it to a speed dial number. If there's already a phone
number saved to the speed dial number you select, your phone will ask if you want
to overwrite the number. Press menu/select when you're finished, and your phone
will go back to the current phonebook entry.
[ 6 5 ] Using the Phonebook
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID or Redial Numbers in the Phonebook
You can store Caller ID or redial numbers in your phonebook so you can use them
later. Go to the Caller ID list or redial list and select the number you want to store.
1) With the phone in standby mode, go to the Caller ID list or redial list and select
the number you want to store.
2) Press the OPTIONS soft key, and then select Add to Phonebook.
3) Use the up/down key to select New Entry to enter a new phonebook location.
If you want to added a number to the existing phonebook location, select
Store & Edit, and then select a location to edit.
4) Enter each entry and confirm the selection by following the steps in pages 64-65.
Storing and Editing Numbers from the Dial Operation
1) With the phone in standby mode, enter the number to store using the number
keypad.
2) Press the OPTION soft key and select Add to Phonebook.
3) Use the up/down key to select New Entry to enter a new phonebook location.
If you want to added a number to the existing phonebook location, select Store
& Edit, and then select a location to edit.
4) Enter each entry and confirm the selection by following the steps in pages 64-
65.
w w w . u n i d e n . c o m
Using the Phonebook [ 6 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing the Phonebook
With the OPTIONS soft key, you can delete phonebook entries, copy entries to
another handset, check how many empty phonebook and speed dial entries you
have available, sort your phonebook by groups, and name phonebook groups.
Deleting phonebook entries
Go to the phonebook and select the entry you want to delete. Press the OPTIONS
soft key and select Delete Selection. Your phone will ask you to confirm select Yes.
To delete all the entries from your phonebook, go to the phonebook and press the
OPTIONS soft key without selecting an entry. Select Delete All. Your phone will ask
you to confirm select Yes.
Copying phonebook entries to another handset or base
Note: When you copy entries to another handset or base, the group, speed dial, and
icon information won't be transferred. Your phone will cancel the copying
process if any one of the following things occurs:
-- If the handset you are copying to doesn't have enough memory (the phone will show
Not enough memory in receiving unit).
-- If the handset you are copying to already has that phone number in its phonebook.
-- A call comes in during the copying process.
[ 6 7 ] Using the Phonebook
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
To copy a single entry, go to the Phonebook and select the entry
you want to copy. Press the OPTIONS soft key and then select
Copy Selection. Select the handset or base you want to copy to
the entry to.
6QꢀYJKEJꢀWPKV!
*CPFUGVꢀꢁꢂ
*CPFUGVꢀꢁꢃ
*CPFUGVꢀꢁꢄ
$CUG
To copy all the phonebook entries, go to the phonebook and
press the OPTIONS soft key without selecting an entry. Select
then Copy All. Select the handset or base you want to copy to
the entry to. Your phone will ask you to confirm select Yes.
ꢀ
5'.'%6
Checking the number of stored entries
To see how many phonebook entries you have, go to the
phonebook and press the OPTIONS soft key and select PhoneBk
Capacity. The phone will show you how many stored names
(entries) and how many stored phone numbers (total) you have.
ꢀ1RVKQPU
0GYꢁ'PVT[
'FKVꢁ5GNGEVKQP
&GNGVGꢁ5GNGEVKQPꢁ
%QR[ꢁ5GNGEVKQPꢁ
2JQPG$Mꢁ%CRCEKV[
&GNGVGꢁ#NN
To see your speed dial entries, go to the phonebook and press the
OPTIONS key and select Check
Dial. The phone will show you
5'.'%6
which speed dial numbers have phone numbers stored in them.
Changing the sorting order
To change the sorting of your phonebook, go to the phonebook and press the
OPTIONS soft key and select Sort. Select Alphabetically by pressing menu/select to
see the list of names in alphabetical order; select Group by pressing menu/select to
see the list of groups in alphabetical order. For alphabetical order, enter a letter
from the keypad to jump to the first entry beginning with that letter.
w w w . u n i d e n . c o m
Using the Phonebook [ 6 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Naming phonebook groups
Your phone comes with 10 groups to organize your phonebook.
You can name groups things like "Family" or "Friends" or
"Softball team" to let you find entries in your phonebook more
quickly.
ꢀ1RVKQPU
%QR[ꢁ5GNGEVKQP
2JQPG$Mꢁ%CRCEKV[
&GNGVGꢁ#NNꢁ
%QR[ꢁ#NNꢁ
5QTV
Follow the steps below to name a group:
'FKVꢁ)TQWRꢁ0COG
1) Go to the Phonebook and select the OPTIONS soft key.
2) Scroll down to Edit Group Name and press menu/select.
5'.'%6
3) Scroll down to the group number you want to edit, and press menu/select.
4) Use the number keypad to enter a name for this group. Press menu/select when
finished.
Making Calls with the Phonebook
To call someone in your phonebook, go to the phonebook and select that person's
phonebook entry, and then press menu/select. Select the number (one of the four
note
available) that you want to call, and then press talk/flash or or /flash on the
base. Press the LAND or MOBILE soft key. You can also dial the number with the
phone in talk mode. After select number, press the DIAL soft key. The number at the
top of the list will dial.
To make a speed dial
using the mobile line,
press the MOBILE soft
key.
Using the Speed Dial
With the phone in standby mode, press and hold the number of the speed dial entry
you want to call until the phonebook entry appears. Select the number (one of the
four available) that you want to call, and then press the LAND or MOBILE soft key,
or talk/flash and or /flash on the base.
[ 6 9 ] Using the Phonebook
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Features
note
If you subscribe to Caller ID from your phone company,
your phone will show you the caller's phone number and
name (if available) whenever a call comes in.
ꢀ%CNNGTꢁ+&
Some paired mobile
phones may not support
Caller ID information
over a Bluetooth
ꢂꢃꢄꢅꢆꢁꢇ
If you subscribe to both Call Waiting and Caller ID the
phone also shows you the name and the number of call
waiting calls (that is, calls that come in while you're on
the line.)
ꢅꢈꢉꢈꢂ2/
,CPGꢁ5OKVJ
ꢅꢂꢅꢊꢅꢂꢅꢊꢅꢂꢅꢂ
connection.
ꢇꢁ.#0&
ꢇ/1$+.'
ꢀꢁꢂꢃꢄꢅꢃꢆꢇꢆꢀ#ꢅꢈ
,CPGꢅ5OKVJ
/'55#)'
ꢃꢀꢃꢉꢃꢀꢃꢀ
0
.#0&
/1$+.'
Using the Caller ID List
You can store up to 100 Caller ID numbers in each
handset or the base. To see the Caller ID list, press the
right key on the handset or base. The phone will show
the Caller ID list. You can use the up/down key to scroll
through the list, or you enter a letter with the keypad
to jump to the first caller ID name that starts with that
letter.
w w w . u n i d e n . c o m
Caller ID Features [ 7 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to see how many Caller ID numbers are stored in
your phone, Press the right key, and then the OPTIONS soft key.
Select CID Capacity.
ꢀ1RVKQPU
&GNGVGꢁ5GNGEVKQP
&GNGVGꢁ#NN
note
#FFꢁVQꢁ2JQPGDQQMꢁ
%+&ꢁ%CRCEKV[ꢁ
Calling someone from the Caller ID list
When you delete a Caller
ID number, you delete it
permanently.
Go to the Caller ID list and select the number you want to call.
If you need to add a "1" to the number for a long distance call,
5'.'%6
press /tone. If you need to add your saved area code to the
*
number, press #. Then press the LAND or MOBILE soft key or talk/flash or , on
the handset, or /flash on the base.
Deleting Caller ID numbers
To delete only one Caller ID number, go to the Caller ID list and select the number
you want to delete. Press the OPTIONS soft key, and select Delete Selection. When
the phone asks you to confirm, select Yes.
To delete all the Caller ID numbers, go to the Caller ID list and press the OPTIONS
soft key. Select Delete All. When the phone asks you to confirm, select Yes.
[ 7 1 ] Caller ID Features
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering Machine
The phone has a built-in answering machine that answers and records incoming
calls. You can also use your answering machine to record a conversation, leave a
voice memo message, or announce a special outgoing message to callers when
you're away from your phone.
Features
• Digital Tapeless Recording
• Up to 12-15 minutes of Recording Time
• Call Screening
• Personal or prerecorded Outgoing Messages
• Voice Prompts (English, Spanish, or French)
• Time and Day Announcement
• Remote Message Retrieval
• Toll Saver
• Conversation Recording
• Voice Memo
• Message Alert
• Retrieve Messages using Handset
• Do Not Disturb
• Hands-free Speakerphone
w w w . u n i d e n . c o m
Answering Machine [ 7 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Answering Machine
To access the answering machine settings, go to the
System Setup Menu and select Answer Machine.
ꢀꢀꢀꢁ1RVKQPU
4GEQTFꢀ/GOQ
5[UVGOꢀ5GVWR
(System Setup)
/'55#)'
Answer
Machine
0
5'.'%6
Security Code
Security
Code
If you want to call in and get your messages when you're away
from, you'll have to set a security code. Go to Answer Machine
and select Security Code. use the keypad to enter a two-digit
number (01-99), and press menu/select when you're done. A
confirmation tone tells you the security code has been saved.
5GEWTKV[ꢀ%QFG
ꢀꢁꢂ
ꢀ
[ 7 3 ] Answering Machine
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Ring Time
You can set the number of times the phone will ring before the
machine answers the call. Go to Answer Machine and select Ring
Time. Then select the number of times you want the phone to
ring; choose from 2, 4, or 6 times. The Toll Saver feature makes
the answering machine answer after two rings if you have new
messages and after four rings if you don't. If you call long
distance to check your messages, Toll Saver lets you hang up
after three rings and not get charged for the call.
4KPIꢀ6KOG
6QNNꢀ5CXGT
ꢁꢀ6KOGU
(System Setup)
ꢂꢀ6KOGU
Answer
Machine
ꢃꢀVKOGU
ꢀ
Ring Time
5'.'%6
Record Time
Record Time
You can set how long a caller has to leave a message before the
answering machine hangs up. Go to Answer Machine and select
Record Time. Then select the maximum length of messages;
choose from 1 minute or 4 minutes. The Announce Only feature
makes the answering machine answer call but it won't let callers
leave a message. When the Announce Only feature is on, and
will appear on the base.
4GEQTFꢀ6KOG
ꢁꢀ/KPWVG
ꢂꢀ/KPWVGU
#PPQWPEGꢀ1PN[
ꢀ
5'.'%6
w w w . u n i d e n . c o m
Answering Machine [ 7 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Alert
If you want the answering machine to beep every 15 seconds
whenever you have unheard messages, turn on the message alert
tone. Go to Answer Machine and select Message Alert. Select On.
A confirmation tone tells you the setting has been saved.
/GUUCIGꢀ#NGTV
1P
(System Setup)
1HH
Answering
Machine
The message alert turns off automatically after you listen to all
your new messages. You can also turn off the message alert by
pressing any key on the base.
ꢀ
Message Alert
5'.'%6
Language
Language
To change the language of your answering machine's voice
prompts and pre-recorded greetings, go to Answer Machine and
select Language. Select English, Fran ﾕais (French), or Espaﾂol
(Spanish).
.CPIWCIG
'PINKUJ
(TCP㩟CKU
'URC㩌QN
ꢀ
5'.'%6
Call Screen
Call Screen
If you want to be able to listen to the caller's message before
you answer, turn on the call screen feature. Go to Answer
Machine and select Call Screen. Select On to turn on call
screening.
%CNNꢀ5ETGGP
1P
1HH
ꢀ
5'.'%6
[ 7 5 ] Answering Machine
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Your Outgoing Greeting
Your answering machine comes with a prerecorded greeting: "Hello. No one is
available to take your call. Please leave a message after the tone." You can use this
greeting, or you can record your own.
(System Setup)
Answering
Machine
Your greeting must be more than 2 seconds and less than 30 seconds.
Recording a greeting
From the base
Record
Greeting
To record your own greeting, make sure the phone is in standby mode. Go to Record
Greeting, and then press menu/select. Press the START soft key. After the answering
machine says, "Record greeting," you can start recording. The message counter
displays 30 and then begins to count down. When you're finished, press the STOP
soft key. The answering machine will play back your greeting so you can hear it.
Greeting
Options
From the handset
Press
. Press
/8. After the answering machine says, "Record greeting," you
can start recording. When you're finished, press
/8 key.
Choosing a greeting
From the base
To choose between the two greetings, first make sure the phone is in standby mode.
Go to GreetingOptions, and then press menu/select. The greeting currently being
used will be played. If you want to use the other greeting, press the CHANGE soft
key.
w w w . u n i d e n . c o m
Answering Machine [ 7 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to delete your greeting, press the DELETE soft key while the greeting is
playing. (You can't delete the prerecorded greeting.)
From the handset
Press
.
Press
/6. The greeting currently being used will be played. If you want to use
the other greeting, press the key again.
If you want to delete your greeting, press the /4 while the greeting is
playing (You can't delete the prerecorded greeting.)
Using the Answering Machine
Turning On the Answering Machine
From the Handset
You can turn on/off the machine using handset remote function. Select . Press
/9. Each time the key is pressed the setting switches between On and Off.
From the Base
With the phone in standby mode, press answer on/off. MESSAGE appears on the
display. If the number is flashing, then there are new messages waiting for you. To
turn your answering machine off, press answer on/off.
ANSWER OFF appears.
[ 7 7 ] Answering Machine
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing Messages
When you have a new message, the new message LED on the handset blinks and
note
appears on the handset. On the base,
appears. The LED stops blinking when
you've listened to all your new messages. The answering machine plays your new
messages first. After you play all your new messages, you can then play your old
messages.
•You can't delete
unheard messages. If
you try to delete
messages before
listening to them, the
answering machine will
beep and say "Please
playback all
You can review your messages from the base or from the handset:
From the base
From the handset
Press
. The answering machine tells you
Press
, The phone tells you how many new
how many new and old messages you have. It
announces the message number, plays the
message, then announces the time and date
that message was received.
and old messages you have. Press
/2 to play
messages."
your messages. It announces the message
number. After playing the message, the
answering machine announces the time and
date that message was received.
Playing your messages
Repeating a message
•If you press |<<
during the first two
seconds (or press
/1 during the first
4 seconds) of a
Press the |<< soft key once to go to the
Press
/1 once to go to the beginning of
/1 repeatedly
to go back to a previous message.
beginning of the current message. Press the |<< the current message. Press
soft key repeatedly to go back to a previous
message. Press and hold the |<< soft key to
rewind through the current message.
message, the
answering machine
goes back to the
previous message.
Press the >>| soft key to go to the beginning of Press
/3 to go to the beginning of the next
Skipping a message
Delete a message
the next message. Press and hold the >>| soft
message. Press and hold
/3 to fast forward
key to fast forward through the current message. through the current message.
While a message is playing, press
to delete While a message is playing, press
/4 to
it. The message is permanently deleted.
delete it. The message is permanently deleted.
While the phone is in standby, press
to
delete all messages. When the answering
Delete all messages
(This command is not available on the handset.)
machine asks you to confirm, press
All messages are permanently deleted.
again.
Press
to stop the message playback and
Press
/5 to stop the message playback. Press
Stop reviewing messages return to standby.
end to exit the message system and return to
standby.
w w w . u n i d e n . c o m
Answering Machine [ 7 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a phone conversation
You can record a phone conversation with your handset or base. The conversation
has to last more than two seconds and less than ten minutes. During a
conversation, press menu/select. Use the up/down key to select Call Record. The
handset or the base sounds a confirmation tone that can be heard by both parties
and displays Recording a Call. When you want to stop recording, press menu/select
and select Call Record again.
note
•If the recording
memory is full,
Unavailable appears
in the display. You can
not record a
conversation until you
clear some messages
from the memory.
Screening Calls
You can screen calls from the base: just let the answering machine answer the call
•Every state has
different regulations
governing the
and listen to the caller leave a message. Answer the phone if you want to talk to
recording of
the caller. To mute the call screen, press
.
conversations over the
telephone. Make sure to
check your local, state
and federal laws before
using this product to
record any telephone
conversation in order
to determine that your
use is in compliance
with such laws or
If you turn on the call screen feature (see page 75), you can also screen calls from
the handset. Let the answering machine answer the call, then press the volume up
key. If you want to talk to the caller, just press talk/flash, and the answering
machine will stop recording. To mute the call screen, press end.
guidelines.
•You can not record
intercom conversations.
•
Only one handset can
screen calls at a time.
If another handset is
screening the call,
you'll just hear a beep
when you try to screen
the call, too.
[ 7 9 ] Answering Machine
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Do Not Disturb (DND)
The do not disturb feature (DND) allows you to mute the ringer of the base and any
registered handsets at the same time. The phone must be in standby mode. Press
and hold dnd on the base. You will hear a confirmation tone, and the dnd LED
illuminates. To cancel the DND feature, press dnd again. You can also mute the
ringer tone while the phone is ringing by pressing dnd on the base.
Activating the DND while the answering system is off will turn the answering
system on automatically. The answering system setting will reset to the original
setting when you cancel the DND.
Recording a voice memo
The voice memo function allows the user to record messages (more than 2 seconds
and less than 4 minutes). To record your memo, press menu/select on the base.
Select Record Memo and press menu/select. Press the START soft key. After the
answering machine says, "Record memo message," you can start recording. When
you're finished, press the STOP soft key.
You will hear a confirmation tone.
You can also record a voice memo remotely, press
.
Press
/7. After the answering machine says, "Record Memo Message," you can
start recording. When you're finished, press
/7 key.
w w w . u n i d e n . c o m
Answering Machine [ 8 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation
You can check, play, or delete messages when you are away from home. You can also
record your own greeting message. To access your answering machine remotely, you
need a touch tone telephone and a two-digit security code (see Setting a Security
Code on page 73).
note
•The system will only
play back messages for
four minutes, and then
it returns to the
1) Call your telephone number and wait for the system to answer. If Toll Saver is
enabled, answering machine will answer in 2 rings if you have new messages and
4 rings if you don't. If the answering machine is off, it will answer after about 10
rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering machine is
off), press 0 and enter your security code within two seconds.
3) The answering machine announces the current time and the number of messages
stored in memory. You hear "To play incoming messages, press zero-two. For
help, press one-zero." Then, you'll hear a beep.
command waiting
mode. To continue
playing your messages,
press 0 then 2 again
within 15 seconds.
•If you enter an
incorrect security code
three times, you will
hear a beep and the
system will return to
standby.
4)
Enter a command from the following chart within 15 seconds. After the first
command, you have two seconds to enter each command.
•For your convenience,
a remote operation
card is provided for
you to use while away
from home (refer to
page 100).
[ 8 1 ] Answering Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Command
Function
Command
Function
Repeat a Message*
Play incoming Messages
answering machine On
Memo Record/Stop**
0 then 1
0 then 2
0 then 6
0 then 7
Greeting Message Record/
Stop**
Skip a Message
0 then 3
0 then 8
Delete a Message
Stop Operation
answering machine Off
Help
0 then 4
0 then 5
0 then 9
1 then 0
* For the Repeat a Message function, press 0 then 1 within about 4 seconds to
repeat the previous message, or press 0 then 1 after about 4 seconds to repeat
the current message.
**The first time you enter the Memo Record or the Greeting Message Record
command, the answering machine will start recording. Enter the same command
again to stop recording.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You can enter another command from
the chart, or you can hang up to exit the system.
6) When you hang up, the answering machine automatically returns to standby.
w w w . u n i d e n . c o m
Answering Machine [ 8 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Handset Features
note
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 12.
•If the party is out of
range, No Signal
appears in the display,
and the operation will
be canceled.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the main base's ability to make or receive
telephone calls. You must set both
handsets to DirectLink Mode to make a
directlink call.
•While a pair of
handsets are in
DirectLink mode, they
cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.
To enter DirectLink mode, Select Direct
Link option in the main menu. And then
press the ENTER soft key. DirectLink
Mode complete. appears when you enter
the DirectLink Mode.
To make a DirectLink call, press the DirectLink soft key. Select the
handset you want to call. To cancel the call, Press end. To answer
a DirectLink call, press talk/flash or on the side of the handset.
Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone
calls again, press the CANCEL soft key, and then press the OK
soft key.
[ 8 3 ] Multi-Handset Features
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Room/Baby Monitor
This feature allows you to monitor sounds
in another room. Place a handset or the
base in the room you wish to monitor; it
will function as a microphone. A second
handset or the base can be used as a
remote speaker, allowing you to monitor
sounds in the room.
note
•This feature only works
when the handset is
within the range of the
base.
•If the party is out of
range, Unavailable
appears in the display,
and the operation will
be canceled.
Using Room/Baby Monitor
To enter Room Monitor mode, press
menu/select. Then select the Room
Monitor. Select the handset or base you
want to monitor. Press end or end/find hs
when you want to stop monitoring.
To prevent the monitoring of a particular
handset or the base, simply turn off the
Room Monitor feature on that handset or
on the base.
To turn off the Room Monitor, go to
System Setup, Base/Handset Setup Menu,
and then Room Monitor. Select Off. You
will hear a confirmation tone.
w w w . u n i d e n . c o m
Multi-Handset Features [ 8 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom
You can use the intercom to talk to another handset or base
without using the phone line. While the phone is in standby
mode, press back/hold/int’com. Select the handset or base you
want to page. If you select All, all other handsets and the base
will be paged.
+PVGTEQO
#NN
*CPFUGVꢁꢁꢁꢁꢂꢃ
*CPFUGVꢁꢁꢁꢁꢂꢄ
*CPFUGVꢁꢁꢁꢁꢂꢅ
$CUG
If the handset or base you're trying to page is busy, the phone
displays System busy Please try later. If the handset you're
trying to page is out of range, the phone displays No Signal
Press HELP. The page is canceled.
ꢁ
ꢀꢁ.#0&
ꢀ/1$+.'
Answering an intercom page
When the handset receives an intercom page, it sounds a tone and shows the ID of
the handset that is paging. If you page the base, Base appears. To answer the page,
pick up the handset and press talk/flash, , or back/hold/int’com on the handset,
/flash or back/hold/int’com on the base.
• If you receive an outside/int’com call or page while selecting the other handset, the
operation is canceled.
• If the party does not answer within one minute, the operation is canceled.
• During an intercom call, if you receive a call, you will hear a ringer tone from the ear
speaker.
• If all handsets or base are paged, only the first party to answer the page will connect.
• If you do not select a handset or base within 30 seconds, the operation will be canceled.
To hang up an intercom page, press end on either side of the handset or end/find
hs on the base.
[ 8 5 ] Multi-Handset Features
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring a Call
You can transfer a call from one handset or the base to another.
During a call, press back/hold/int’com; this will put the call on
hold. Select the handset or base you want to page. If you select
All, all other handsets and base will be paged. To cancel the
page and go back to the caller, press talk /flash on the handset
or /flash on the base.
*QNFꢀ6TCPUHGT
#NN
note
*CPFUGVꢂꢂꢂꢂꢃꢄ
*CPFUGVꢂꢂꢂꢂꢃꢅ
*CPFUGVꢂꢂꢂꢂꢃꢆ
You can not transfer a
land line call to a
Bluetooth mobile
phone.
ꢂ
ꢁꢂ.#0&
ꢁ/1$+.'
Answering a transfer page
When the handset receives a transfer page, it sounds a tone and
shows the ID of the handset that is paging. If you page the base, Base appears.
Press talk/flash or back/hold/int’com on the handset, or /flash or back/hold/
int’com on the base to answer the page. If you want to accept the transfer and talk
to the outside caller, press talk/flash or back/hold/int’com on the handset, or
flash or back/hold/int’com on the base.
/
w w w . u n i d e n . c o m
Multi-Handset Features [ 8 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on Power Sources
note
Power Failure
Your phone has a backup battery in the base that provides power backup in the
event of a power failure.
•A replacement Uniden
adapter or battery may
be purchased by
calling Uniden's Parts
department (see back
cover page).
Battery replacement and handling
When the operating time becomes short, even after the battery is recharged, please
replace the battery. With normal usage, your battery should last about one year.
Warning
•Use only the Uniden
(BT-0002 and BT446)
rechargeable battery
packs supplied with
your cordless phone.
To avoid the risk of personal injury or property damage from fire or electrical shock,
use only Uniden AD-0009 AC adapters and Uniden BT-0002 and BT-446 battery
packs with your phone.
Caution
•
•
•
•
Use only the specified Uniden battery pack (BT-0002 and BT-446).
Do not remove the batteries from the handset to charge them.
Never throw the battery into a fire, disassemble them, or heat them.
Do not remove or damage the battery casing.
[ 8 7 ] Note on Power Sources
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
General Information
The phone complies with FCC Parts 15 and 68. Operating temperature:
0 °C to +50 °C (+32 °F to +122 °F)
AC Adapter Information
AC Adapter part number: AD-0009
Input Voltage: 120V AC 60Hz
Output Voltage: 9V DC 600mA
Battery Information
Battery part number: BT-0002 (Handset)
BT-446 (Base)
800mAh, 3.6V
Capacity:
980mAh, 3.7V
Specifications, features, and availability of optional accessories are all subject to
change without prior notice.
w w w . u n i d e n . c o m
General Information [ 8 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first. If these steps
do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm,
Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.)
Symptom
Suggestion
• Make sure the AC adapter is plugged into the base or the charger (if you have more than one
handset) and wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handset are clean.
The charge LED won't illuminate
when the handset is placed in
the cradle.
• Move the handset and/or base away from metal objects or appliances and try again.
• Make sure that you are not too far from the base.
The audio sounds weak.
• Make sure that you are not too far from the base.
• Make sure the line is not in use. If an outside call is already using a line, you cannot use that line to
make another outside call.
Can't make or receive calls.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter and the backup battery and reconnect.
• Change the Digital Security Code (see page 15).
• Make sure that you are not too far from the base.
• Charge the battery in the handset for 10 hours by placing the handset on the base or charging
cradle.
The handset doesn't ring or
receive a page.
• Change the Digital Security Code (see page 15).
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
Severe noise interference.
[ 8 9 ] T r o u b l e s h o o t i n g
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
• The call was placed through a switchboard.
The Caller ID does not display.
• Call your local telephone company to verify your Caller ID service is current. There may be a problem
with your Caller ID service.
You cannot register the handset • Charge the battery pack in the handset for 10 hours.
at the base.
• Change the Digital Security Code (see page 15).
The handset doesn't
communicate with other
handsets.
• Change the Digital Security Code (see page 15).
• Make sure that you have registered all handsets.
An extra handset can't join the • Make sure there are not 2 handsets already using the conference feature.
conversation. • Make sure that another handset is not in privacy mode.
The Room Monitor feature does • Make sure to place the handset(s) within the range of the base.
not work.
• Make sure that Room Monitor feature is turned on.
• Make sure the base unit is plugged in.
The answering machine does not • Make sure that the answering machine is turned on.
work.
• Make sure that the message record time is not set to Announce only
(see page 74).
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory maybe full. Delete some or all of the saved message.
Messages are incomplete.
There is no sound on the base
unit or handset speaker during • Adjust the speaker volume on the base unit or handset.
call monitoring or message
playback.
• Make sure the call screen feature is set to on.
w w w . u n i d e n . c o m
Troubleshooting [ 9 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
• Make sure you are using the correct PIN number.
Cannot access remote call-in
features from another touchtone • Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If
phone.
it cannot, you may have to use another phone to access your phone.
Time stamp cannot be heard.
• Make sure you have set the time (see "Setting Date and Time" on page 28).
Bluetooth Troubleshooting
Symptom
Suggestion
• Make sure your device is Bluetooth enabled.
• Make sure the cordless handset has Bluetooth feature set to ON and not OFF.
• Confirm correct PIN Code is being entered.
• Pairing methods may vary by per mobile phone. First try pairing with Search
device may seem connected, but when you try using, it doesn’t work. In this case, try the second
option, Find Me mode.
• Make sure your mobile phone is still registered to the base unit. Review paired devices under Select
Mobile option at base unit.
Device mode. The
Unable to pair headset and/or
mobile phone to my ELBT595/
ELBT585/ELX500
• Make sure your mobile supports Hands Free Profile (HFP).
• Make sure your Bluetooth headset supports Headset Profile (HSP).
[ 9 1 ] T r o u b l e s h o o t i n g
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
• Make sure your Bluetooth headset is in close range of the cordless handset it’s paired with.
• Make sure your mobile phone is in close range of the main base unit. (In theory, you have a range of
30 feet /10 meters line of sight. Walls or other intervening objects may require you to move closer to
the base).
Unable to make or receive calls • Make sure the Auto Answer feature on your Bluetooth mobile phone is turned off. If AutoAnswer is
using Bluetooth headset and/or
mobile phone.
On, your mobile may answer the call and interrupt your ELBT595. If this happens, the ELBT595 will
place the call on hold.
• Register only one Bluetooth device to your ELBT595 and try again.
• Make sure your mobile supports Hands Free Profile (HFP).
• Make sure your Bluetooth headset supports Headset Profile (HSP).
• Deregister your Bluetooth headset or mobile phone, and register it again.
• Check to see if your Bluetooth mobile phone requires a special setting to let you talk while the
mobile phone is on hook (for example, the Sony Ericson T610/T637/616 requires a special setting).
Unable to hear any voice.
w w w . u n i d e n . c o m
Troubleshooting [ 9 2 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
System Reset
De-register the Handset
1) Press and hold end and # for more than 5 seconds. Select Deregister HS.
2) The phone will ask you to confirm the deregistration. Select Yes.
ꢀ5[UVGOꢁ4GUGV
>GIKUVGTꢁ*5
4GRNCEKPIꢁ$CUG
When the base information is deleted, the handset displays
MUST place handset in base to register! Models may vary, refer to Owners Manual
for help. Re-register the handset to the base (see page 13).
5'.'%6
Replacing the Base Setting
1) Press and hold end and # for more than 5 seconds. Select Replacing Base.
ꢀ5[UVGOꢁ4GUGV
>GIKUVGTꢁ*5
4GRNCEKPIꢁ$CUG
Replacing Base appears.
2) Select Yes.
3) You will hear a confirmation tone. The base information will be deleted.
5'.'%6
When the base information is deleted, the handset displays
MhUeSlTp.pRlea-creeghiasntdesrettheinhabnasdesettotoretghiestbears!eM(osdeeelspamgaey 1v3a)r.y, refer to Owners Manual for
4GRNCEKPIꢀ$CUG
;GU
0Q
5'.'%6
[ 9 3 ] T r o u b l e s h o o t i n g
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Liquid Damage
Moisture and liquid can damage your cordless phone. Follow the steps below if your phone gets wet:
Case
Action
If the handset or base is exposed to moisture or
liquid, but only the exterior plastic housing is
affected.
Wipe off the liquid, and use as normal.
If moisture or liquid has entered the plastic housing Handset:
(i.e. liquid can be heard in the phone or liquid has
entered the handset battery compartment or vent
openings on the base).
1) Remove the battery cover and leave it off for ventilation.
2) Disconnect the battery pack. Leave the battery cover off and the battery pack
disconnected for at least 3 days.
3) Once the handset is completely dry, reconnect the battery pack and the battery
cover.
4) Recharge the handset's battery pack for 20 hours before using.
Base:
1) Disconnect the AC adapter from the base, cutting off electrical power.
2) Disconnect the telephone cord from the base.
3) Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery
packs to avoid charge interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will
cause permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please call
our Customer Service Hotline at 1-800-297-1023.
w w w . u n i d e n . c o m
Liquid Damage [ 9 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with
local codes for possible battery disposal instructions.
5. Do not disassemble any component of this product.
Please follow instructions for repairing, if any (e.g. battery
replacement section); otherwise do not substitute or repair any parts
of the device except as specified in this manual.
Precautions!
Before you read anything else, please observe the following:
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or
corporation commission for information.
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to the
unit, DO NOT expose this unit to rain or moisture.
This equipment is hearing aid compatible.
Should you experience trouble with this equipment, please contact
Uniden customer service at 800-297-1023. If the equipment is causing
harm to the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.
SAVE THESE INSTRUCTIONS
CAUTION
Rechargeable Lithium Ion and Nickel-Metal-
Hydride Battery Warning
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. Do not open or mutilate
the battery, and disconnect the battery before shipping this product.
• This equipment contains rechargeable Lithium Ion and Nickel-Metal-
Hydride battery.
NOTICE: According to telephone company reports, AC electrical surges,
typically resulting from lightning strikes, are very destructive to
telephone equipment connected to AC power sources. To minimize
damage from these types of surges, a surge arrestor is recommended.
• The rechargeable batteries contained in this equipment may explode
if disposed of in a fire.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of this equipment is
a label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
• Nickel is a chemical known to state of California to cause cancer.
• Do not short-circuit the battery.
• Do not charge the rechargeable battery used in this equipment in any
charger other than the one designed to charge this battery as
specified in the owner's manual. Using another charger may damage
the battery or cause the battery to explode.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner's manual, could void your authority to operate this
product.
An applicable Universal Service Order Codes (USOC) certification for the
jacks used in this equipment is provided (i.e., RJ11C) in the packaging
with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Privacy of communications, may not be ensured when using this phone.
To insure the safety of users, the FCC has established criteria for the
amount of radio frequency energy various products may produce
depending on their intended usage. This product has been tested and
found to comply with the FCC’s exposure criteria. For body worn
operation, the FCC RF exposure guidelines were also met when used
with the Uniden accessories supplied or designed for this product. Use
of other accessories may not ensure compliance with FCC RF exposure
guidelines and should be avoided.
Rechargeable Batteries Must Be Recycled or
Disposed of Properly
The exclamation point within an equilateral
is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In
most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal point (e.g.,
03 is a REN of 0.3). For earlier products, the REN is separately shown
on the label.
Uniden works to reduce lead content in our PVC coated cords in our
products and accessories.
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This interference
is caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around
your home to see what appliances may be causing the problem. In
addition, we recommend that the base not be plugged into a circuit
that also powers a major appliance because of the potential for
interference. Be certain that the antenna on the unit is fully extended
when needed.
Warning!
The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn't practical, the
telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury
to persons, including the following:
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change
to a different channel.
1. Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
[ 9 5 ] P r e c a u t i o n s & W a r r a n t y
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the interference.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This
warranty is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). Disconnect the battery from the Product and
separately secure the battery in its own separate packaging within the
shipping carton. The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original
purchase and a note describing the defect that has caused you to
return it. The Product should be shipped freight prepaid, by traceable
means, to warrantor at:
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other than
your own cordless telephone unit. Consequently, any communications
using your cordless telephone may not be private.
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty
service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF
WARRANTY: Uniden warrants, for one year, to the original retail owner,
this Uniden Product to be free from defects in materials and
craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty, (E)
used in any conjunction with equipment or parts or as part of any
system not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the owner's manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return
it to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
w w w . u n i d e n . c o m
P r e c a u t i o n s & W a r r a n t y [ 9 6 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The
REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
RADIO EQUIPMENT
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were
met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device. "Privacy of
communications may not be ensured when using this telephone".
[ 9 7 ] I . C . N o t i c e
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Call privacy. . . . . . . . . . . . . . . . . 26
Call screen . . . . . . . . . . . . . . . . . 75
Call transfer feature . . . . . . . . . . . 86
Call Vibrate. . . . . . . . . . . . . . . . . 33
Caller ID
Call Waiting . . . . . . . . . . . . . . . 52
CIDCW. . . . . . . . . . . . . . . . . . . 70
CWDX . . . . . . . . . . . . . . . . . . . 52
Conference . . . . . . . . . . . . . . . . . 53
Holster . . . . . . . . . . . . . . . . . . . .15
Index
I
A
I.C. notice. . . . . . . . . . . . . . . . . .97
Important safety instructions . . . . .95
Intercom. . . . . . . . . . . . . . . . . . .85
Animations. . . . . . . . . . . . . . . . . 37
Answering machine
Answering Mode. . . . . . . . . . . . 72
Call screen . . . . . . . . . . . . . . . 75
Message alert . . . . . . . . . . . . . 75
Security code . . . . . . . . . . . . . 73
Setting up menu . . . . . . . . . . . 73
Anykey Answer . . . . . . . . . . . . . . 25
Area code. . . . . . . . . . . . . . . . . . 29
Audio tone. . . . . . . . . . . . . . . . . 59
K
Key touch tone. . . . . . . . . . . . . . .26
Language . . . . . . . . . . . . 27, 37, 75
LCD contrast . . . . . . . . . . . . . . . .25
Liquid damage . . . . . . . . . . . . . . .94
Low battery . . . . . . . . . . . . . . . . . 9
D
Date & time . . . . . . . . . . . . . . . . 28
Delete ringer. . . . . . . . . . . . . . . . 35
De-registering handset . . . . . . . . . 93
Dial mode. . . . . . . . . . . . . . . . . . 30
Digital security code . . . . . . . . . . 15
DirectLink. . . . . . . . . . . . . . . . . . 83
Display Option. . . . . . . . . . . . . . . 23
Distinctive ID . . . . . . . . . . . . . . . 27
M
B
Making a call . . . . . . . . . . . . . . . .48
Message alert. . . . . . . . . . . . . . . .75
Mobile priority . . . . . . . . . . . . . . .24
Mute
Backup battery . . . . . . . . . . . . . . . 7
Banner . . . . . . . . . . . . . . . . . . . 26
Battery
Installation. . . . . . . . . . . . . . . . 8
Replacement . . . . . . . . . . . . . . 87
Bluetooth feature
Handset ringer . . . . . . . . . . . . .59
Microphone . . . . . . . . . . . . . . .59
E
O
Headset
Earpiece volume. . . . . . . . . . . . . . 57
De-registering . . . . . . . . . . . 47
Handset property . . . . . . . . . 45
Reconnect . . . . . . . . . . . . . . 47
Reconnecting. . . . . . . . . . . . 44
Turning on or off . . . . . . . . . 46
Mobile
Base property. . . . . . . . . . . . 42
De-registering . . . . . . . . . . . 40
Editing . . . . . . . . . . . . . . . . 41
Registering . . . . . . . . . . . . . 38
Expanding your phone . . . . . . . . . 12
Open to Answer . . . . . . . . . . . . . .25
Out going greeting
F
Choosing . . . . . . . . . . . . . . . . .76
Recording. . . . . . . . . . . . . . . . .76
Out of range . . . . . . . . . . . . . . . .51
Find handset. . . . . . . . . . . . . . . . 60
G
General information . . . . . . . . . . . 88
P
Global setup . . . . . . . . . . . . . . . . 28
Phonebook
H
Capacity. . . . . . . . . . . . . . . . . .68
Copying entries. . . . . . . . . . . . .67
Group . . . . . . . . . . . . . . . . . . .65
Making calls . . . . . . . . . . . . . . .69
Name. . . . . . . . . . . . . . . . . . . .64
Hands-free conversation . . . . . . . . 49
Hanging up. . . . . . . . . . . . . . . . . 51
Headset installation. . . . . . . . . . . 16
Hold . . . . . . . . . . . . . . . . . . . . . 53
C
Calendar . . . . . . . . . . . . . . . . . . 61
w w w . u n i d e n . c o m
I N D E X [ 9 8 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Number . . . . . . . . . . . . . . . . . 64
Sort order . . . . . . . . . . . . . . . . 68
Speed dial. . . . . . . . . . . . . . . . 65
Unique display. . . . . . . . . . . . . 65
Unique ring. . . . . . . . . . . . . . . 64
Power failure . . . . . . . . . . . . . . . 87
Precautions . . . . . . . . . . . . . . . . 95
Privacy mode . . . . . . . . . . . . . . . 26
Soft key . . . . . . . . . . . . . . . . . . . 20
Speaker phone. . . . . . . . . . . . . . . 49
Speaker volume
Base. . . . . . . . . . . . . . . . . . . . 57
Handset . . . . . . . . . . . . . . . . . 59
Storing a caller ID or redial number 66
System setup. . . . . . . . . . . . . . . . 24
R
Tone dial . . . . . . . . . . . . . . . . . . 60
Transferring a call . . . . . . . . . . . . 86
Troubleshooting. . . . . . . . . . . . . . 89
Receiving a call . . . . . . . . . . . . . 50
Record ringer . . . . . . . . . . . . . . . 33
Record time . . . . . . . . . . . . . . . . 74
Recording conversation . . . . . . . . 79
Redialing a call. . . . . . . . . . . . . . 56
Register the handset . . . . . . . . . . 13
Reminder . . . . . . . . . . . . . . . . . . 61
Remote operation . . . . . . . . . . . . 81
Reviewing message . . . . . . . . . . . 78
Ring time. . . . . . . . . . . . . . . . . . 74
Ringer tone
U
Uniden’s Cordless Telephone
Customization Tool. . . . . . . . . . . . 17
Unique ID. . . . . . . . . . . . . . . . . . 27
Unique ring. . . . . . . . . . . . . . . . . 32
V
Vibrate All . . . . . . . . . . . . . . . . . 32
W
Changing . . . . . . . . . . . . . . . . 34
Deleting . . . . . . . . . . . . . . . . . 35
Playing. . . . . . . . . . . . . . . . . . 34
Storing. . . . . . . . . . . . . . . . . . 33
Ringer volume
Base . . . . . . . . . . . . . . . . . . . 57
Handset . . . . . . . . . . . . . . . . . 58
Room/baby monitor. . . . . . . . . . . 84
Wallpaper . . . . . . . . . . . . . . . . . . 35
Warranty. . . . . . . . . . . . . . . . . . . 96
S
Setting up
Answering Machine. . . . . . . . . . 73
Base unit . . . . . . . . . . . . . . . . 10
Telephone Line . . . . . . . . . . . . 10
w w w . u n i d e n . c o m
[ 9 9 ] I N D E X
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
C U T
C U T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from
home
Turn on the answering
system remotely
Remote access away from
home
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
C U T
C U T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access away from
home
Turn on the answering
system remotely
Remote access away from
home
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
w w w . u n i d e n . c o m
[ 1 0 0 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
C U T
C U T
Task
Repeat a Message
Key
Task
Repeat a Message
Key
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
Help Guidance
C U T
C U T
Task
Repeat a Message
Key
Task
Repeat a Message
Key
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
[ 1 0 1 ]
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
Having Trouble?
Our customer care specialists are here to help you! Visit our website at www.uniden.com or call
our customer hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5
p.m. CST. (Phone support is closed on holidays.)
Need a Part?
To order headsets, additional handsets, replacement batteries or other accessories, visit
our website at www.uniden.com or call 1-800-554-3988, Mon-Fri, 8 a.m. to 5 p.m. CST.
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on the accessibility
features of this product, please call 1-800-874-9314 (voice or TTY)
p
May be covered under one or more of the following U.S. patents:
4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,493,605
5,533,010 5,574,727 5,581,598 5,650,790 5,660,269 5,661,780
5,663,981 5,671,248 5,696,471 5,717,312 5,732,355 5,754,407
5,758,289 5,768,345 5,787,356 5,794,152 5,801,466 5,825,161
5,864,619 5,893,034 5,912,968 5,915,227 5,929,598 5,930,720
5,960,358 5,987,330 6,044,281 6,070,082 6,125,277 6,253,088
6,314,278 6,418,209 6,618,015 6,671,315 6,714,630 6,782,098
6,788,920 6,788,953
Other patents pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
REGISTER ONLINE TODAY!
THANK YOU FOR BUYING A UNIDEN PRODUCT.
©2005 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
UPZZ01744BZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|