Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Handsets.....................................30
Changing.the.Handset.Banner................................. 30
Selecting.a.Ring.Tone.............................................. 30
Activating.AutoTalk................................................... 3ꢀ
Activating.Any.Key.Answer...................................... 3ꢀ
Adjusting.the.Speaker.Volume................................. 38
Adjusting.the.Audio.Tone......................................... 38
Finding a Lost Handset.............................................39
Using Hold, Conference and Transfer .....................39
Placing.a.Call.on.Hold.............................................. 39
Conferencing............................................................ 39
Transferring.a.Call................................................... 40
Answering.a.transferred.call................................ 40
Using Your Phone......................................................31
During.a.Power.Failure............................................ 3ꢀ
Making.and.Receiving.Calls..................................... 32
Making.a.Call.from.the.Phonebook.......................... 33
Chain.dialing.from.the.phonebook....................... 33
Switching.to.the.Speakerphone.During.a.Call......... 33
Using Special Features.............................................41
Privacy.Mode........................................................... 4ꢀ
Using.the.Intercom................................................... 4ꢀ
Making.an.intercom.page.................................... 4ꢀ
Answering.an.intercom.page............................... 42
Muting.the.Microphone............................................ 42
Tone.Dialing.Switch.Over......................................... 42
Using.a.Voice.Mail.Service...................................... 43
Resetting.the.voice.message.waiting.indicator... 43
Installing.the.Optional.Headset................................ 43
Using Caller ID, Call Waiting, and Redial Lists.......34
Using.the.Caller.ID.List............................................ 34
Making.a.Call.from.a.Caller.ID.Record.................... 34
Seven-digit.dialing............................................... 35
Deleting.Caller.ID.Numbers..................................... 35
Using.Call.Waiting.................................................... 36
Redialing.a.Number................................................. 36
Deleting.a.Redial.Record......................................... 36
Setting Up the Answering System...........................44
Recording.a.Personal.Greeting................................ 44
Selecting.a.Greeting................................................ 44
Deleting.Your.Personal.Greeting.............................. 45
Selecting.the.Language.for.Announcements........... 45
Adjusting the Ringer, Earpiece and
Speaker Volume .............................................37
Adjusting.the.Ringer.Volume.................................... 37
Muting.the.Ringer.(One.call.only)............................ 37
Adjusting.the.Earpiece.Volume................................ 37
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting.the.Number.of.Rings.................................... 45 Troubleshooting ........................................................54
Setting.the.Day.&.Time............................................ 46
Setting.the.Record.Time.(or.Announce.only)........... 46
Activating.the.Message.Alert.................................... 47
Activating.the.Base.Call.Screen............................... 47
Common.Issues....................................................... 54
Resetting.the.Handset............................................. 56
Resetting.the.Handset.Without.the.Base................. 57
Changing.the.Line.Mode.for.Multiple.Extensions..... 58
Traveling.Out.of.Range............................................ 58
Liquid.Damage......................................................... 59
Using the Answering System...................................48
Turning.Your.Answering.System.On.and.Off............ 48
Reviewing.Messages............................................... 49 Precautions! ..............................................................60
Screening.Calls........................................................ 50
Rechargeable.Nickel-Metal-Hydride..
Battery.Warning........................................... 60
Turning.Off.the.Message.Alert.Tone......................... 50
Important.Safety.Instructions................................... 60
The.FCC.Wants.You.To.Know.................................. 6ꢀ
Radio.interference............................................... 62
Cordless.telephone.privacy................................. 62
I.C..Notice................................................................ 62
Terminal.equipment............................................. 62
Radio.equipment................................................. 62
Operating.the.Answering.System..
While.You.Are.Away.from.Home.................. 50
Setting.a.security.code.or..
Personal Identification Number (PIN).......... 50
Dialing.in.to.your.answering.system.................... 50
Maintenance...............................................................52
Specifications........................................................... 52
Battery.Information................................................... 52
Battery.life........................................................... 52
Low.battery.alert.................................................. 53
Cleaning.the.charging.contacts........................... 53
Battery.replacement.and.handling....................... 53
Power.Failures......................................................... 53
One Year Limited Warranty.......................................63
Index .........................................................................64
Remote Operation Card ............................................66
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.
Note:. Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.
from.the.actual.unit.
As.an.Energy.Star®.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.
the.Energy.Star® guidelines for energy efficiency. Energy Star®.is.a.U.S..registered.mark.
Uniden.is.a.registered.trademark.of.Uniden.America.Corporation.
Accessibility
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.
disabilities,.please.call.the.accessibility.voice/TTY.line:.ꢀ-800-874-93ꢀ4.
Our.customer.care.hours.as.well.as.accessibility.information.can.be.found.on.our.website,.www.uniden.com,.under.
the.“Accessibility”.link..If.your.call.is.received.outside.of.our.business.hours,.you.can.leave.us.a.message.and.we.will.
call.you.back.
May.be.covered.under.one.or.more.of.the.following.U.S..patents:
4,797,9ꢀ6
5,660,269
5,787,356
5,929,598
6,253,088
6,788,920
6,953,ꢀꢀ8
5,426,690
5,663,98ꢀ
5,794,ꢀ52
5,930,720
6,3ꢀ4,278
6,788,953
7,023,ꢀ76
5,49ꢀ,745
5,67ꢀ,248
5,80ꢀ,466
5,960,358
6,32ꢀ,068
6,839,550
7,030,8ꢀ9
5,493,605
5,7ꢀ7,3ꢀ2
5,825,ꢀ6ꢀ
5,987,330
6,4ꢀ8,209
6,889,ꢀ84
7,ꢀ46,ꢀ60
5,533,0ꢀ0
5,732,355
5,864,6ꢀ9
6,044,28ꢀ
6,6ꢀ8,0ꢀ5
6,90ꢀ,27ꢀ
7,203,307
5,574,727
5,754,407
5,893,034
6,070,082
6,67ꢀ,3ꢀ5
6,907,094
7,206,403
5,58ꢀ,598
5,758,289
5,9ꢀ2,968
6,076,052
6,7ꢀ4,630
6,9ꢀ4,940
5,650,790
5,768,345
5,9ꢀ5,227
6,ꢀ25,277
6,782,098
6,940,867
Other.patents.pending.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:
PLACE YOUR BASE
TRY TO AVOID
• Microwave ovens
• Refrigerators
• Fluorescent
lighting
• Other cordless
telephones
Near an AC outlet and
a telephone wall jack.
• Personal computers
• Wireless LAN
equipment
• Areas with
a lot of
background
noise
• TVs
• Other electronics
• Dust
• Excessive
moisture
• Shock
• Vibration
In a centrally-located
open area.
• Direct sunlight
• Extreme temperatures
Notes:.For.maximum.range:.
• Keep.both.the.base.and.handset.antennas.free.of.obstruction.
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Battery
Use.only.the.Uniden.BT-ꢀ008.rechargeable.battery.pack.supplied.with.your.cordless.telephone.
Press in on the handset
battery case cover.
Use the finger indention
for a better grip and slide
the cover downward to
remove.
Line up the red and black wires
on the battery pack connector
with the sticker in the handset’s
battery compartment.
Push the battery pack
connector in firmly. (You
should hear it click into
place.) Gently tug on the
battery wires to make sure
the connection is secure.
Replace the cover over the
battery compartment and
slide it up into place.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Handset
Use.only.the.Uniden.PS-0007.AC.adapter.supplied.with.your.cordless.telephone.
Connect the AC
adapter to the
DC IN 9V jack and
route the cord
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
through the molded
wiring channel.
Place the handset in the charging
cradle with the display facing forward.
What if the charge LED doesn’t light up?
Reseat the handset; make sure the
contacts on the bottom of the handset are
lined up with the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet
that’s controlled by a wall switch.
Make sure that the charge
LED illuminates when the
handset is seated.
Charge your handset at least 15 to 20 hours before plugging into the phone line.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Base
To avoid risk of fire and shock, only use the Uniden PS-0009 AC adapter with the base.
Connect the handset cord to the
left side of the phone and the base
corded handset.
Connect the AC adapter
to the DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord
through the molded
wiring channel.
Don’t put any power cord where
it people might trip over it or step
on it. If a power cord becomes
chafed or worn out, it can create
a fire or electrical hazard.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the Phone Line
Connect the
telephone
cord to the
Route the cord through the
molded wiring channel.
TEL LINE jack.
Connect the
telephone cord
to a telephone
wall jack.
What if CHECK TEL LINE
appears on the base display?
The telephone cord may not be
connected correctly. Check the
telephone cord connection.
Do you have DSL or any high-speed Internet service
delivered through your phone line?
Telephone wall jack
Try putting a DSL filter between the base and the wall
jack. Without a filter, telephone-line-based Internet
services can interfere with standard phones.
Telephone cord
DSL filter
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Testing the Connection
Pick.up.the.handset.from.the.charging.cradle.and.press.[ /Flash]..You.should.hear.a.dial.tone,.and.the.display.
should.show.TALK.
What.if.I.can’t.hear.a.dial.tone?
Check.the.telephone.cord.connection.on.the.base.
What.if.the.display.doesn’t.show.TALK?.
• Check.the.battery.pack.connection.in.the.handset.
• Make.sure.the.battery.pack.is.fully.charged..
• Make.sure.the.AC.adapter.cord.is.securely.connected.to.the..
DC IN 9V.jack.and.a.standard.power.outlet.
• Try.resetting.the.handset.(see.page.56).
Make.a.quick.test.call,.and.then.press.[ ].to.hang.up..
What.if.there.is.a.lot.of.static?.
Check.the.sources.of.interference.described.in.Choosing.the.
Best.Location.(see.page.5):.is.the.base.near.any.of.those?
What.if.the.call.doesn’t.go.through?
Try.changing.the.dialing.mode.(see.the.next.section).
Note:. Make.sure.you.can.get.a.dial.tone.on.any.accessory.handsets.that.were.packaged.with.your.phone..
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the dial mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing..These.
days,.most.base.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.
your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get.a.dial.tone.
or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
ꢀ) Press.[Menu/Select]..
2) Select.the.GLOBAL.SETUP.menu,.and.then.the.DIAL.MODE.
submenu.
3) Scroll.[
].to.highlight.PULSE.
4) Press.[Menu/Select]. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.TONE.in.step.2.
NOW YOU ARE READY TO USE YOUR PHONE!
Installing the Belt Clip
Insert.the.tabs.on.the.sides.of.the.belt.clip.into.the.holes.on.either.side.of.the.
handset..Press.the.belt.clip.down.until.it.clicks.into.place..(Tug.on.the.clip.to.make.
sure.it’s.secure.).
To.remove.the.belt.clip,.gently.pull.the.tabs.out.of.the.holes,.then.slide.the.belt.clip.
off.of.the.handset.
Download from Www.Somanuals.coꢀmꢀ. All Manuals Search And Download.
Expanding Your Phone
Adding accessory handsets
Your.phone.supports.a.total.of.six.cordless.handsets,.including.any.that.were.supplied.with.your.phone..You.can.now.
place.a.fully-featured.cordless.handset.anywhere.AC.power.is.available.to.connect.the.charging.cradle.
• Your.phone.is.compatible.with.the.DCX200.and.DCX300.accessory.handset.
• For.instructions.on.connecting.the.charging.cradle,.see.page.7.
• If.you.purchase.any.accessory.handsets.separately,.you.must.register.the.handsets.to.the.base.before.you.can.
use.them..(Accessory.handsets.that.come.packaged.with.a.base.are.already.registered.to.that.base.)
Registering accessory handsets
When.charged,.registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.display:
.. ..
↔
To.register.a.DCX200.or.DCX300.accessory.handset:
ꢀ) Charge.the.handset.for.ꢀ5-20.hours.
2) With.the.phone.in.standby,.press.[Menu/Select].on.the.base..
3) Move.the.cursor.to.select.the.REGISTER.HANDSET.menu,.and.then.press.[Menu/Select]..HANDSET.
REGISTERING.will.appear.
4) On.the.handset,.press.and.hold.[#].until.the.handset.beeps.and.displays.HANDSET.REGISTERING.
5) When.the.handset.has.registered.to.the.base,.the.LCD.will.display.REGISTRATION.COMPLETE.then.show.the.
handset.ID.number..
If.the.display.shows.REGISTRATION.FAILED,.repeat.the.process.again.
Note:. If.a.handset.has.ever.been.registered.to.a.base,.reset.the.handset.before.you.register.it.to.a.new.base.(see.
Resetting.the.Handset.on.page.56)..Or.to.use.multiple.bases,.see.the.next.section.
ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Multiple Bases
The.handsets.supplied.with.your.phone.(or.any.DCX200.accessory.handsets).can.be.registered.to.a.total.of.four.
different.bases..Compatible.bases.include.the.DECT2060,.DECT2080,.DECT2085,.DECT2088,.and.DECT3080.
models..Once.your.handset.is.registered.to.more.than.one.base,.you.can.set.the.handset.to.search.automatically.the.
available.base,.or.you.can.select.manually.which.base.the.handset.should.connect.to.(for.example,.if.you.have.one.
base.with.an.answering.machine,.you.can.tell.the.handset.to.connect.that.base.to.check.messages)..
Registering the Handset to Another Base
ꢀ) Make.sure.the.handset.battery.is.fully.charged.
2) To.register.a.handset.to.DECT2060,.DECT2080.or.DECT3080.base:
• Disconnect.the.base.AC.adapter..Then.press.and.hold.[find hs].or.[find].while.you.reconnect.the.adapter..
Keep.pressing.[find hs].or.[find].until.the.charge.LED.starts.to.blink.
To.register.a.handset.to.DECT2085.or.DECT2088.base:
• With.the.phone.in.standby,.press.[Menu/Select].on.the.base..Move.the.cursor.to.select.the.REGISTER.
HANDSET.menu,.and.then.press.[Menu/Select]..HANDSET.REGISTERING.will.appear.
3) On.the.handset,.Press.[Menu/Select]..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.
appear.in.the.display.
4) Wait.approximately.thirty.seconds..“REGISTRATION.COMPLETE”.will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.the.display.shows.REGISTRATION.FAILED,.repeat.the.process.again.
ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Base
When.your.handset.is.registered.to.another.base,.it.will.automatically.connect.to.the.base..A.base.ID.(that.is.for.the.
handset.only).will.be.assigned.in.the.order.of.registration..You.can.either.select.a.base.you.want.to.use.manually,.or.
set.to.AUTO..If.you.set.to.AUTO,.when.the.handset.comes.out.of.range,.it.searches.automatically.the.available.base.
in.order.of.base.ID.
ꢀ) With.the.phone.in.standby,.press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.SELECT.
BASE.submenu.
2) Move.the.cursor.to.select.the.base.you.want.to.connect.to,.or.choose.AUTO.to.have.the.handset.automatically.
select.the.base.
3) Press.[Menu/Select]..SEARCHING.will.appear.in.the.display.
4) When.the.base.is.found,.the.handset.will.return.to.standby..If.the.base.is.not.found,.“SEARCHING”.continues.
to appear. You can repeat the procedure listed above to return back to the original connection or to find the
different.base.
Notes:.•.You.cannot.change.bases.during.a.call..
• To confirm which bases the handset is registered to, open the SELECT BASE submenu and use [ ].and..
[
].to.scroll.through.the.list..Press.[ ].to.close.the.list.and.return.to.standby.
ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.telephone.wall.plate.
Remove the stand
from the base.
Snap the stand
into the notches
on the bottom of
the base.
Connect the AC adapter and the
telephone cords as shown on
pages 8 and 9. Remember to route
the AC adapter cord through the
channel on the bottom of the base.
Route the AC adapter cord
through the molded wiring
channel on the bottom of
the stand, and let the cord
hang below the stand.
Plug the telephone
cord into the wall
jack. Route the
telephone cord
through the
molded wiring
channel on the
bottom of the
(To AC outlet)
stand as shown.
ꢀ5
Download from Www.Somanuals.com. All Manuals Search And Download.
Place the mounting slots over the
pins on the wall plate.
Wall plate
Slide the base
down to lock it
into place.
(To AC outlet)
On the base unit, pull the handset
retainer out of the slot.
Rotate it clockwise 180 degrees and
flip the retainer from front to back.
Slide it back into the slot.
The retainer holds the corded
handset in place.
Notes:.Mounting.the.phone.directly.on.the.wall
• Be.sure.the.wall.is.capable.of.supporting.the.weight.
of.the.phone,.and.use.the.proper.type.of.anchoring.
device.for.the.wall.material.
• Insert.two.#ꢀ0.screws.(minimum.length.of.ꢀ.3/8.
inches,.not.supplied).into.the.wall,.3.ꢀ5/ꢀ6.inches.
apart..
• Leave.the.screw.heads.ꢀ/8.inch.away.from.the.wall.to.
allow.room.for.mounting.the.phone..
• Align.the.mounting.slots.over.the.screws.and.slide.
the.base.down.into.place.as.shown.above.
ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to Know Your New Phone
Features
• ꢀ.9GHz.DECT6.0.expandable.system
• Store.30.Caller.ID.numbers.on.base.&.each.handset
• Speakerphone.on.base.&.handset
• Expands.up.to.6.handsets
• Integrated.digital.answering.system
• Caller.ID/Call.Waiting
• 7.ringer.options.on.handset.(3.tones/4.melodies)
• Last.5.number.redial
• Corded.handset.with.base.keypad
• Cordless.handset.and.charging.cradle
• Advanced.phonebook.features:
• Bilingual.menu.displays.
(for.US.models:.English.and.Spanish,.
for.Canadian.models:.English.and.French)
• Call.transfer
• Conferencing
• Intercom
• Store.70.phonebook.entries.on.base.&.each.
handset
• Alphabetical.search
• Personalized.ring.by.party.(on.handset)
• Transfer.single.listing.or.entire.phonebook
Answering system features
• Digital.tapeless.recording
• Day.and.time.announcement
• Remote.message.retrieval
• Toll.saver
• Up.to.ꢀ4.minutes.of.recording.time
• Call.screening
• Personal.or.pre-recorded.outgoing.messages
• Message.alert
• Bilingual.voice.prompts..
• Records.up.to.59.messages
(for.US.models:.English.and.Spanish,.
for.Canadian.models:.English.and.French)
ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology Used in this Manual
Accessory
Handsets
Additional.handsets.that.can.register.to.the.base,.allowing.you.to.add.handsets.without.connecting.another.
phone.line..This.base.supports.a.total.of.six.cordless.handsets;.see.page.ꢀ2.for.compatible.handsets.
Base
The.main.part.of.the.phone.that.connects.to.your.phone.line.and.lets.you.make.and.receive.calls.
Charging
cradle
A.cradle.that.comes.with.an.accessory.handset.and.charges.the.handset.battery.pack.
It.connects.to.power.but.does.not.connect.to.a.phone.line.
Caller.ID.is.available.from.your.telephone.provider.and.is.offered.to.users.on.a.subscription.basis.
With.this.service,.you.will.be.able.to.see.the.incoming.caller.information.such.as.name.and.phone.number.
CID
CID/CW or
CIDCW
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.telephone.provider.
With.this.service,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.user.
Any.settings.that.apply.to.all.registered.handsets.and.the.base.
These.features.are.available.by.selecting.“GLOBAL.SETUP”.in.the.handset.or.the.base.menu..Only.one.
handset.or.the.base.can.change.global.settings.at.a.time,.and.you.have.to.make.sure.the.phone.is.not.
currently.being.used..If.you.have.multiple.bases,.the.different.bases.have.each.global.settings;.select.the.base.
before.changing.the.global.setting.(see.Selecting.the.Base.on.page.ꢀ4).
Global
Settings
The.handset.and.the.base.are.not.in.use..(It.doesn’t.matter.whether.the.handset.is.in.the.cradle:.the.[ /Flash].
Standby
or.[
].on.the.handset.or.[
].on.the.base.hasn’t.been.pressed.or.the.base.corded.handset.hasn’t.been.
picked.up.from.the.base,.and.there.is.no.dial.tone.).
Station
Talk
Any.registered.handset.or.the.base.
A.dial.tone.has.been.enabled,.so.you.can.dial.and.carry.on.a.conversation.with.an.outside.party.
Manual Conventions
This.manual.uses.several.different.type.styles.to.help.you.distinguish.between.different.parts.of.the.phone:
• Bold.text.with.“[ ]”.indicates.a.key.or.button.on.the.phone
• ALL CAPITALS indicates text on the display, such as menu options, prompts, and confirmation messages
• lower case bold.text.indicates.a.status.light.on.the.phone
• ALL CAPITALS BOLD.indicates.a.connection.jack.on.the.base.or.charging.cradle
ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Handset
new message LED
Headset
jack cover
Earpiece
Belt clip hole
Display (LCD)
Speakerphone
speaker and
ringer
[Menu/Select] key
/Mute] key (messages/mute)
[ ] key (caller ID/right)
[Clear/Int’com] key
(clear/intercom)
[
[
] key (up)
[ /Flash] key (talk/flash)
[ ] key (end call)
[
] key (phonebook/left)
[
] key (down)
Battery
Twelve-key dial pad
compartment
[#] key
[ /tone] key
[Redial/Pause] key
[
] key (speaker)
Microphone
Charging contacts
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Base
Display (LCD)
[Menu/Select] key
[Redial/Pause] key
[
/
] key
(phonebook/repeat/left)
Corded
handset
[
[
] key (up)
] key
/
(caller ID/skip/right)
[
] key (down)
[
] key and LED (play/stop)
Speaker
[Answer on/off] key
(answering system on/off)
[Flash] key
[
] key and LED (speaker)
Corded
handset
cord
Microphone
[Int'com] key (intercom)
[#] key
[ /tone] key
] key (delete)
[Clear/Mute] key
[
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Interface
Reading the Display
Handset
In standby
During a call
Handset ID and banner
Call duration
Number of new
Caller ID calls received
.
Note:.The.handset.does.not.display.the.day.and.time.
Base
Status of your
answering system
Status of your
answering system
In standby
During a call
Answer ON OFF
Answer ON OFF
Day of the week
and time
Number of new
Caller ID calls received
Call duration
Message counter
Message counter
The.ringer off.icon.indicates.that.the.ringer.is.turned.off.
The.voice mail.icon.appears.when.you.have.messages.waiting.in.your.voice.mailbox.
The.privacy.icon.appears.when.the.Privacy.Mode.is.turned.on.
The.speaker.icon.appears.when.the.speaker.phone.is.in.use.
The.mute.icon.appears.while.the.microphone.is.muted.
The.battery.icon.indicates.the.handset.battery.status:.full,.medium,.low,.and.empty.
2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Four-way Function Key
Your.handset.and.base.have.a.four-way.function.
key.that.allows.you.to.move.the.cursor.or.pointer.
on.the.display.and.access.the.most.commonly.
used.features.at.the.touch.of.a.button..By.moving.
this.key.to.the.left,.you.open.the.phonebook..
Move.the.key.to.the.right.to.access.Caller.ID.
information..To.use.this.four-way.key,.place.your.
thumb.over.the.key.and.move.to.the.four.positions.
to.get.the.feel.of.how.it.moves.and.operates.
Up
View the
phonebook
View the
Caller ID
Four-way
Function Key
Using the Menus
The.menus.for.the.handset.and.the.base.work.in.
the.same.way:
Down
• To.open.the.menu,.press.the.[Menu/Select].key.
• The.arrow.pointer.on.the.left.side.of.the.line.shows.which.menu.item.is.currently.highlighted..Use.[ ].on.the.four-
way.function.key.to.move.the.pointer.up.and.[ ].to.move.the.pointer.down.
• To.select.the.highlighted.option,.press.[Menu/Select].
• To.go.back.to.the.previous.screen,.press.[left].on.the.four-way.function.key.
• To.exit.the.menu.on.the.handset,.press.[ ]..
• To.exit.the.menu.on.the.base,.press.[
].
• If.you.don’t.press.any.keys.for.thirty.seconds,.the.phone.will.time.out.and.exit.the.menu..(When.setting.the.day.
and.time,.the.time-out.period.is.extended.to.two.minutes.)
• For.ANSW..SETUP,.GLOBAL.SETUP,.DAY.&.TIME.and.REGISTER.HANDSET.(base.only).menu.options,.make.
sure.the.line.is.not.in.use.and.the.handsets.are.within.range.of.the.base.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text from Your Phone
You.can.use.the.number.keypad.on.your.handset.or.base.to.enter.text.by.referring.to.the.letters.printed.on.each.
number key. When you press the number key in a text entry field, the phone displays the first letter printed on the
number.key..Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third..Capital.
letters are displayed first, then lower case letters, and then the number on the key.
If two letters in a row use the same number key, enter the first letter, then use [right] on.the.four-way.function.key.to.
move.the.cursor.to.the.next.position.to.enter.the.second.letter..
For.example,.to.enter.the.word.“Movies”:.
ꢀ) Press.[6].once.to.enter.M.
2) Use.[right].on.the.four-way.function.
key.to.move.the.cursor.to.the.right.
3) Press.[6].six.times.to.enter.o.
4) Press.[8].six.times.to.enter.v.
5) Press.[4].six.times.to.enter.i.
6) Press [3] five times to enter e.
7) Press.[7].eight.times.to.enter.s.
8) Press.[Menu/Select].to.end.your.text.
entry.
If.you.make.a.mistake.while.entering.a.
name,.use.[right] or.[left] on.the.four-
way.function.key.to.move.the.cursor.to.the.
incorrect.character..Press.[Clear/Int’com].on.the.handset.or.[Clear/Mute].on.the.base.to.erase.the.wrong.character,.
and.then.enter.the.correct.character..To.delete.all.characters,.press.and.hold.[Clear/Int’com].on.the.handset.or.
[Clear/Mute].on.the.base.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
Selecting a Language
Each.station.supports.two.languages:.English.and.Spanish.for.US.models.or.English.and.French.for.Canadian.
models..Once.you.select.a.language,.the.menus.on.the.station.will.display.in.that.language..The.default.language.is.
English.
ꢀ) Press.[Menu/Select]..
2) On.the.handset,.select.the.HANDSET.SETUP.
menu,.and.then.the.HANDSET.LANGUAGE.
submenu..
On.the.base,.select.the.BASE.SETUP.menu,.
and.then.the.BASE.LANGUAGE.submenu.
3) Move.the.cursor.to.choose.a.language..
for US models:..
Choose.ENGLISH.or.ESPAÑOL.(Spanish)..
for Canadian models:..
Choose.ENGLISH.or.FRANÇAIS.(French).
4) Press.[Menu/Select]...
You will hear a confirmation tone.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating Personal Ring (Handset only)
You.can.assign.special.ringer.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.
Caller.ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ringer.to.that.number,.the.phone.uses.it.so.
you.know.who.is.calling..To.turn.the.personal.ringing.on.or.off,.follow.these.steps:
ꢀ) Press.[Menu/Select]..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.PERSONAL.RING.
submenu.
3) Move.the.cursor.to.select.ON.or.OFF.
4) Press.[Menu/Select]. You will hear a confirmation tone.
Activating the Key Touch Tone
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.tone.on.or.off.
ꢀ) Press.[Menu/Select]..
2) Select.the.HANDSET.SETUP.or.BASE.SETUP.menu,.and.then.the.
KEY.TOUCH.TONE.submenu.
3) Move.the.cursor.to.select.ON.or.OFF.
4) Press.[Menu/Select]. You will hear a confirmation tone.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Phonebook
Each.station.has.its.own.separate.phonebook.that.holds.up.to.seventy.names.and.numbers..When.a.station’s.
phonebook.is.full,.the.station.beeps.and.shows.MEMORY.FULL.on.the.display..You.cannot.add.any.names.and.
numbers.in.that.station’s.phonebook.until.you.delete.some.of.the.existing.ones.
You.can.also.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.
once.your.call.connects..This.is.referred.to.as.chain.dialing..(See.Chain.dialing.from.the.phonebook.on.page.33.)
Creating Phonebook Entries
To.store.names.and.numbers.in.your.phonebook,.please.follow.these.steps:
ꢀ) With.the.phone.in.standby,.press.[ ].(on.the.left.side.of.the.four-way.key).
2) To.create.a.new.phonebook.entry,.press.[Menu/Select]..Select.the.
CREATE.NEW.menu..EDIT.NAME.appears..
3) Enter the name for this entry (EDIT NAME)..
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.sixteen.characters..(See.Entering.
Text.from.Your.Phone.on.page.23.for.instructions.on.entering.text.).If.you.do.not.want.to.enter.a.name.for.this.
entry,.your.phone.will.store.this.entry.as.<NO.NAME>..Press.[Menu/Select] when you are finished.
4) Enter the number for this entry (EDIT NUMBER).
Once.you.have.stored.a.name,.EDIT.NUMBER.appears.next..Use.the.
number.keypad.to.enter.the.phone.number;.the.phone.number.can.contain.
up.to.twenty.digits..If.you.need.the.phone.to.pause.between.digits.when.it’s.
dialing.(for.example,.to.enter.an.extension.or.an.access.code),.press.[Redial/
Pause].to.insert.a.two-second.pause..You.will.see.a.P.in.the.display..You.can.
also.use.more.than.one.pause.together.if.two.seconds.is.not.long.enough..
Each.pause.counts.as.one.digit..Press.[Menu/Select] when you are finished.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Assign a personal ring tone for this entry (PERSONAL RING) (Handset only).
You.can.attach.a.special.ring.tone.to.each.phonebook.entry.on.the.handsets;.
the.phone.will.use.this.ring.tone.when.this.person.calls..Use.[ ].and.[ ].to.
select.one.of.the.seven.different.ring.tone.options.(see.Selecting.a.Ring.Tone
on.page.30.for.a.complete.list.of.ring.tones)..As.you.scroll.through.the.tones,.
you.will.hear.a.sample.of.each.tone.(unless.the.handset.ringer.volume.is.set.
to.off)..When.you.hear.the.ring.tone.you.want.to.use,.press.[Menu/Select]..If.
you.do.not.want.to.use.a.personal.ring.tone.for.this.phonebook.entry,.choose.
NO.SELECTION;.the.phone.will.use.your.standard.ring.tone.setting.
6) You will hear a tone confirming that the new entry has been stored, and DONE! appears in the display.
Finding a Phonebook Entry
Press.[ ].to.open.the.phonebook..Phonebook.entries.are.stored.in.alphabetical.order..To.scroll.through.the.
phonebook.from.A.to.Z,.press.[ ]..To.scroll.trough.the.phonebook.from.Z.to.A.press.[ ].
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..For.example,.to.search.
for.an.entry.beginning.with.the.letter.M,.press.[6] once. The phonebook jumps to the first entry that begins with the
letter.you.entered;.you.can.then.use.[ ].and.[ ].to.scroll.to.other.entries.
To.close.the.phonebook.and.return.to.standby,.press.[ ].on.the.handset.or.[
a.phonebook.entry.during.a.call.and.want.to.close.the.phonebook,.press.[ ].again.instead.of.[ ].or.[
].on.the.base..If.you.are.looking.up.
].
Editing an Existing Phonebook Entry
ꢀ) With.the.phone.in.standby,.press.[ ].to.open.the.phonebook.
2) Find.the.entry.you.want.to.edit.and.press.[Menu/Select].
3) Select.EDIT..Follow.the.steps.for.Creating.Phonebook.Entries.on.page.26..If.you.do.not.wish.to.change.the.
information.at.any.step,.simply.press.[Menu/Select].to.go.to.the.next.step.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID or Redial Numbers in the Phonebook
You.can.store.Caller.ID.records.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.
redial.list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.
will.not.be.able.to.store.it.)
ꢀ) With.the.phone.in.standby,.press.[ ].to.open.the.Caller.ID.list.or.[Redial/Pause].to.open.the.redial.list.
2) Use.[ ].and.[ ] to.scroll.through.the.Caller.ID.records.or.redial.numbers..When.you.come.to.the.information.
you.want.to.store,.press.[Menu/Select]..
Note:. If.you.need.to.add.(or.delete).a.“ꢀ”.to.the.beginning.of.the.Caller.ID.phone.number,.press.[ /tone].(see.
*
page.34)..If.you.need.to.add.(or.delete).the.stored.area.code.to.the.Caller.ID.phone.number,.press.[#].
(see.page.35).
3) Select.STORE.INTO.PB..EDIT.NAME.appears..If.the.phone.number.is.already.stored.in.memory,.you.will.hear.a.
beep, and THIS DATA IS ALREADY SAVED! appears in the display. The number will not be stored.
4) Continue.by.following.the.steps.for.Creating.Phonebook.Entries.on.page.26.
Deleting a Single Phonebook Entry
ꢀ) With.the.phone.in.standby,.press.[ ].
2) Find.the.entry.that.you.want.to.delete.and.press.[Menu/Select]..
3) Select.DELETE..DELETE.ENTRY?.appears.in.the.display.
4) Move.the.cursor.to.select.YES.
5) Press.[Menu/Select]. You will hear a confirmation tone, and DELETED!
appears.in.the.display..
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting all Phonebook Entries
ꢀ) With.the.phone.in.standby,.press.[ ].
2) Press.[Menu/Select],.and.then.select.DELETE.ALL..DELETE.ALL?..
appears.in.the.display.
3) Move.the.cursor.to.select.YES.
4) Press.[Menu/Select]. You will hear a confirmation tone, and DELETED! .
appears.in.the.display.
Copying Phonebook Entries to Another Station
You.can.transfer.phonebook.entries.from.one.station.to.another.without.having.to.re-enter.names.and.numbers..You.
can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.
ꢀ) With.the.phone.in.standby,.press.[ ]..
2) To copy one entry, find the phonebook entry you want to copy. Press [Menu/Select],.and.then.select.COPY..
To.copy.all.entries,.press.[Menu/Select],.and.then.select.COPY.ALL.
3) Move.the.cursor.to.select.the.station.which.you.want.to.transfer.the.entries.to.and.then.press.[Menu/Select].
.
If.you.select.COPY.ALL,.ARE.YOU.SURE?.appears.on.the.display.screen..Move.the.cursor.to.select.YES,.and.
then.press.[Menu/Select].
4) The.phonebook.entries.will.be.transferred.to.the.designated.station..During.the.copy.process,.the.receiving.
station.shows.RECEIVING.and.the.ID.of.the.sending.station.
5) When the transfer is completed, DONE! appears on the station.
Notes:.•.The.handsets.must.be.currently.connected.to.the.same.base.(see.page.ꢀ4).
.
. If.the.station.you.want.to.transfer.to.already.has.seventy.entries.in.its.phonebook,.you.will.hear.a.beep,.and.
NOT.ENOUGH.MEMORY.IN.RECEIVING.UNIT.appears.on.the.display..
.
•.If.the.selected.station.is.out.of.range.or.data.transfer.is.cancelled,.UNAVAILABLE.appears.in.the.display..
Phonebook.listings.will.not.be.transferred.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Handsets
All.of.the.following.options.are.set.separately.for.each.handset,.so.you.can.customize.a.handset.for.each.room.in.
your.house.
Changing the Handset Banner
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..The.
default.banner.is.Handset.#ꢀ,.Handset.#2,.etc..You.can.change.the.name.your.
phone.displays.by.changing.the.banner.display..If.you.have.more.than.one.handset,.
the banner name identifies your handset.
ꢀ) Press.[Menu/Select]..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.BANNER.submenu.
3) Use.the.keypad.to.enter.or.edit.the.banner.name..(See.Entering.Text.from.Your.Phone.on.page.23.for.detailed.
instructions.on.entering.text.)
4) Press.[Menu/Select]. You will hear a confirmation tone.
Note:.. When.you.have.multiple.bases.and.even.if.the.handset.ID.is.changed.when.you.switch.to.a.different.base,.
the.handset.will.keep.the.banner.name.
Selecting a Ring Tone
You.may.choose.from.four.melodies.or.three.tones.for.your.
phone’s.primary.ring.tone..Each.handset.can.use.a.different.
ring.tone.or.melody..The.available.ring.tones.are.as.listed:
Fur.Elise.(ELISE)
Flicker
Clatter
Wake.Up
We.Wish.You.A.Merry
Christmas.(MERRY-XMAS)
Aura.Lee.(AURA.LEE)
Star.Spangled.Banner
(STAR.SPNGL)
Tones
Melodies
ꢀ) Press.[Menu/Select]..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.RINGER.TONES.submenu.
3) Move.the.cursor.to.select.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.
hear.a.sample.(unless.the.handset.ringer.volume.is.set.to.off).
4) When.you.hear.the.tone.you.want.to.use,.press.[Menu/Select]..You.will.hear.a.
confirmation tone.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating AutoTalk
AutoTalk.allows.you.to.answer.the.phone.simply.by.picking.up.the.handset.from.the.cradle..You.do.not.have.to.press.
a.button.to.answer.the.call.
ꢀ) Press.[Menu/Select]..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.AUTOTALK.submenu.
3) Move.the.cursor.to.select.ON.or.OFF.
4) Press.[Menu/Select]. You will hear a confirmation tone.
Activating Any Key Answer
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.on.the.twelve-key.dial.pad..
ꢀ) Press.[Menu/Select]..
2) Select.the.HANDSET.SETUP.menu,.and.then.the.ANY.KEY.ANSWER.submenu.
3) Move.the.cursor.to.select.ON.or.OFF.
4) Press.[Menu/Select]. You will hear a confirmation tone.
Using Your Phone
During a Power Failure
Because.the.phone.is.a.corded/cordless.combination.phone,.it.can.still.perform.several.of.its.functions.during.a.
power.failure..The.following.features.will.function.with.base.corded.handset.even.during.a.power.failure:
• Making.and.receiving.calls.with.the.base.corded.handset
• Corded.handset.volume.control
• Call.Waiting.on.a.base.corded.handset.call
• Entering.pauses.when.dialing.from.the.base.corded.handset
• A.special.ring.tone.will.sound.during.a.power.failure.and.you.will.not.be.able.to.control.the.volume.setting.of.this.
ring.
All.other.features.are.disabled.during.a.power.failure.
3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Receiving Calls
From the base
speakerphone
From the base
corded handset
From a handset
speakerphone
From a cordless handset
ꢀ) Pick.up.the.handset.
ꢀ) Pick.up.the.corded.
handset.from.the.
base.
ꢀ) Pick.up.the.handset.
from.the.cradle.
ꢀ) Press.[ ].
from.the.cradle.
2) Press.[ ].
2) Listen.for.
2) Press.[ /Flash].
the.dial.tone.
2) Listen.for.the.dial.
3) Listen.for.the.dial.
3) Listen.for.the.dial.tone.
4) Dial.the.number.
tone.
tone.
3) Dial.the.
Making
a call
number.
3) Dial.the.number.
4) Dial.the.number.
OR
OR
OR
OR
ꢀ) Pick.up.the.handset.
ꢀ) Dial.the.
ꢀ) Dial.the.number.
ꢀ) Pick.up.the.handset.
from.the.cradle.
number.
from.the.cradle.
2) Pick.up.the.corded.
handset.from.the.
base.
2) Dial.the.number.
2) Press.[ ].
2) Dial.the.number..
3) Press.[ /Flash].
3) Press.[ ].
ꢀ) Pick.up.the.handset..
(If.AutoTalk.is.on,.the.
phone.will.answer.when.
you.pick.up.the.handset.
from.the.cradle.)
ꢀ) Pick.up.the.handset..
Answering
a call
Pick.up.the.corded.
handset.from.the.base.
Press.[ ].
2) Press.[ ].
2) Press.[ /Flash]..(If.Any.
Key.Answer.is.on,.you.
can.also.press.any.key.
on.the.dial.pad.)
Return.the.corded.
handset.to.the.base.
cradle.
Hanging
up
Press.[ ].
Press.[ ].or.return.the.handset.to.the.cradle.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call from the Phonebook
ꢀ) With.the.phone.in.standby,.press.[ ].to.open.the.phonebook.
2) Find.the.phonebook.entry.you.want.to.call.(see.Finding.a.Phonebook.Entry.on.page.27).
3) Press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.[ ].on.the.base.
to.dial.the.number.
Note:. You.can.also.press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press..
[
].on.the.base.before.you.open.the.phonebook..Find.the.phone.number.you.want.to.dial,.and.then.press.
[Menu/Select].
Chain dialing from the phonebook
If.you.often.have.to.enter.a.series.of.digits.or.a.code.number.during.a.call,.you.can.save.that.code.number.to.a.
phonebook.entry..When.your.call.connects,.just.use.the.phonebook.to.transmit.the.saved.code.number..(This.is.
referred.to.as.chain.dialing.).
ꢀ) Enter.the.code.number.(up.to.twenty.digits).into.the.phonebook.(see.Creating.Phonebook.Entries.on.page.26)..
Be.sure.to.enter.the.code.number.into.the.phonebook.exactly.as.you.would.enter.it.during.a.call..
2) During.a.call,.when.you.hear.the.prompt.that.tells.you.to.enter.the.code.number,.press.[ ].
3) Use.[ ].or.[ ].to.select.the.phonebook.entry.that.contains.the.digits.you.want.to.send.
4) Press.[Menu/Select]..The.phone.sends.the.digits.of.the.code.number.exactly.as.you.saved.them.in.the.
phonebook.entry.
Switching to the Speakerphone During a Call
Handset:.To.switch.a.normal.call.to.the.handset.speakerphone,.press.[ ]..To.switch.from.a.handset.speakerphone.
call.to.a.normal.call,.press.[ ].
Base:.To.switch.a.call.from.the.corded.handset.to.the.base.speakerphone,.press.[ ].and.then.return.the.corded.
handset.to.the.cradle..To.switch.a.call.from.the.base.speakerphone.to.the.corded.handset,.simply.remove.the.corded.
handset.from.the.cradle.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Caller ID, Call Waiting, and Redial Lists
If.you.subscribe.to.Caller.ID.service.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.
and.name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.Caller.ID.on.Call.Waiting,.the.phone.will.also.
show.you.the.name.and.the.number.of.any.call.that.comes.in.while.you’re.on.the.line.
Using the Caller ID List
You.can.store.up.to.thirty.Caller.ID.numbers.in.each.station..Caller.ID.records.are.
stored.from.newest.to.oldest..Once.your.Caller.ID.list.is.full,.the.oldest.record.will.be.
automatically.deleted.when.a.new.call.is.received.
To.open.the.Caller.ID.list,.press.[
].(on.the.right.side.of.the.four-way.key)..The.
phone.will.show.the.number.of.new.Caller.ID.records.(that.is,.records.you.have.not.
reviewed.yet).and.the.total.number.of.stored.records..Use.[ ].and.[ ] to.scroll.
through.the.list..(New.records.have.an.asterisk.next.to.the.received.time.)
Making a Call from a Caller ID Record
ꢀ) With.the.phone.in.standby,.press.[
].to.open.the.Caller.ID.list.
2) Use.[ ].and.[ ] to find the Caller ID record you want to dial.
3) If.you.need.to.add.(or.delete).a.“ꢀ”.to.the.beginning.of.the.displayed.phone.number,.press.[ /tone]..
*
4) Press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.[ ].on.the.base.
to.dial.the.number.
Note:. You.can.also.press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.
[
].on.the.base.before.you.open.the.caller.ID.list..Find.the.phone.number.you.want.to.dial,.and.then.press.
[Menu/Select].
What’s.this.“add.or.delete.a.ꢀ”.about?
• Any phone number in the Caller ID records might (or might not!) have a “1” at the front, depending on how
different.phone.companies.send.the.Caller.ID.information..
• The.phone.dials.the.number.exactly.as.it.appears.in.the.Caller.ID.record..
• If.the.phone.number.is.a.long.distance.or.toll.call,.but.the.Caller.ID.record.does.not.have.a.“ꢀ”.in.front.of.the.
number,.press.[ /tone].to.add.it..If.the.phone.number.is.a.local.or.non-toll.call,.but.the.Caller.ID.record.has.a.
*
“ꢀ”.in.front.of.the.number,.press.[ /tone].to.delete.it.
*
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Seven-digit dialing
If.you.can.make.a.local.call.by.dialing.only.seven.digits.instead.of.ten,.you.can.tell.the.phone.to.hide.your.local.area.
code.in.the.Caller.ID.list;.any.calls.from.outside.your.area.code.will.show.all.ten.digits..This.setting.applies.to.the.
base.and.all.handsets.currently.connected.to.the.same.base.
To.program.your.local.area.code:
ꢀ) Press.[Menu/Select]..
2) Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
3) Use.the.number.keypad.([0].through.[9]).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.
stored,.it.appears.in.the.display..Press.[Clear/Int’com].on.the.handset.or.[Clear/Mute].on.the.base.to.delete.the.
stored.code,.and.then.enter.a.new.one.
4) Press.[Menu/Select]. You will hear a confirmation tone.
Note:. If.you.have.multiple.bases,.select.the.base.before.programming.the.area.code.(see.page.ꢀ4).
• The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area
code.to.the.code.programmed.on.the.phone..If.the.two.codes.match,.the.station.hides.the.area.code.in.the.Caller.
ID.list.
• When.you.are.reviewing.the.Caller.ID.list,.you.can.show.the.hidden.area.code.by.pressing.[#]..Press.[#].again.to.
hide.the.area.code..
• When.you.dial.from.a.Caller.ID.record.or.store.a.Caller.ID.record.in.the.phonebook,.the.phone.dials.or.stores.the.
digits.exactly.as.they.appear.on.the.display..If.you.need.to.use.ten.digits,.be.sure.to.press.[#].to.show.the.area.
code.before.you.dial.or.store.the.number..(See.page.28.to.store.a.Caller.ID.record.in.the.phonebook.)
Deleting Caller ID Numbers
To.delete.only.one.Caller.ID.number,.press.[
] when the phone is in standby, and then find the number you want to
delete..Press.[Menu/Select] and select DELETE ENTRY. When the phone asks you to confirm, select YES.
To.delete.all.the.Caller.ID.numbers,.press.[
].when.the.phone.is.in.standby,.and.then.press.[Menu/Select]..When.
the phone asks you to confirm, select YES.
Notes:.•.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
.
•.Caller.ID.numbers.are.stored.separately.in.each.station..Deleting.a.record.from.one.station.will.not.delete.
the.record.from.any.other.stations.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Call Waiting
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.
phone,.a.call.waiting.tone.will.sound..If.you.also.have.Caller.ID.service,.the.phone.
shows.the.Caller.ID.information.for.the.incoming.call..Press.[ /Flash].on.the.handset.
or.[Flash].on.the.base.to.accept.the.waiting.call..There.is.a.short.pause,.and.then.
you.will.hear.the.new.caller..To.return.to.the.original.caller,.press.[ /Flash].on.the.
handset.or.[Flash].on.the.base.
Note:.You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.
Redialing a Number
You can quickly redial the last five numbers dialed on each station.
ꢀ) With.the.phone.in.standby,.press.the.[Redial/Pause].to.open.the.redial.list.
2) Use.[ ].and.[ ].or.[Redial/Pause].to.scroll.through.the.redial.list.
3) When you find the number you want to dial, press [ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.
handset.from.the.base.or.press.[ ].on.the.base.
Notes: • If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
.
.
•.If.the.redial.memory.is.empty,.EMPTY.appears.in.the.display.and.you.will.hear.a.beep.
•.You.can.also.press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press..
[
].on.the.base.before.you.open.the.redial.list..Find.the.phone.number.you.want.to.dial,.and.then.press.
[Menu/Select].
Deleting a Redial Record
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:
ꢀ) With.the.phone.in.standby,.press.[Redial/Pause].
2) Use.[ ].and.[ ].to.scroll.through.the.redial.list.
3) When you find the redial number you want to delete, press [Menu/Select].and.select.DELETE.ENTRY.
4) When the phone asks you to confirm, select YES. The redial number is deleted.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You.can.choose.from.four.ringer.volume.settings.(off,.low,.medium,.and.high).
separately.on.each.handset.or.the.base.
ꢀ) With.the.phone.in.standby,.press.[ ].or.[ ]..The.display.shows.the.current.
volume.level.and.the.station.sounds.the.ringer.at.that.level..
2) Use.[ ].to.make.the.ringer.volume.louder.or.[ ].to.make.it.softer.or.turn.it.
completely.off.
3) When.you.hear.the.ringer.volume.level.you.want.to.use,.stop.pressing.keys..
The.station.will.use.the.new.ringer.volume.starting.with.the.next.incoming.call.
Note:. If.you.set.the.ringer.volume.to.OFF,.the.station.won’t.ring..The.other.stations.will.ring.according.to.their.
individual.settings.
Muting the Ringer (One call only)
While.the.phone.is.ringing,.press.[ /Mute].or.[ ].on.the.handset,.or.[Clear/Mute].or.[
].on.the.base.to.mute.the.
ringer.for.this.call..The.phone.will.ring.again.on.the.next.call..(The.handset.must.be.off.the.cradle.to.mute.the.ringer.)
Adjusting the Earpiece Volume
You.can.choose.from.six.volume.levels.for.each.cordless.handset.earpiece.or.the.corded.handset.earpiece..To.
adjust.the.earpiece.volume.while.on.a.call,.press.[ ].(to.make.it.louder).or.[ ].(to.make.it.softer)..The.display.
shows.the.current.volume.level.for.the.earpiece.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Speaker Volume
Handset speaker:.
You.can.choose.from.six.volume.levels.for.the.handset.speaker.while.on.a.speakerphone.call.or.when.the.handset.
is.accessing.the.answering.system..To.adjust.the.handset.speaker.volume,.press.[ ].(to.make.it.louder).or.[ ].(to.
make.it.softer)..The.handset.display.shows.the.current.volume.level.for.the.handset.speaker.
Note:. The.handset.earpiece.and.the.handset.speaker.have.separate.volume.settings.
Base speaker:.
You.can.choose.from.ten.volume.levels.for.the.base.speaker.while.on.a.speakerphone.call.or.when.the.answering.
system.announces.or.plays.a.message..To.adjust.the.base.speaker.volume,.press.[ ].(to.make.it.louder).or.[ ].
(to.make.it.softer)..The.base.display.shows.the.current.volume.level.for.the.base.speaker.
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.cordless.handset.earpiece,.not.the.
speakerphone.and.the.base.corded.handset.
To.adjust.the.audio.tone:
ꢀ) While.on.a.call,.press.[Menu/Select].
2) Move.the.cursor.to.select.AUDIO.TONE,.and.then.press.[Menu/Select].
3) Move.the.cursor.to.select.desired.option.(HIGH.TONE,.NATURAL.TONE,.or.LOW.TONE),.and.then.press.
[Menu/Select]..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding a Lost Handset
To.locate.a.misplaced.handset,.press.[Int’com].on.the.base.when.the.phone.is.in.standby..Use.[ ].or.[ ].to.
select.the.handset.you.want.to.page,.and.then.press.[Menu/Select]..Select.ALL.to.page.all.registered.handsets..
To.cancel.paging,.press.[Int’com].on.the.base.again.
Note:.Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
ꢀ) During.a.call,.press.[Clear/Int’com].on.the.handset.or.[Int’com].on.the.base.to.place.the.caller.on.hold..If.you.
leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.screen.will.read,.LINE.ON.HOLD.
2) To.return.to.the.party.on.hold,.press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.
base.or.press.[ ].on.the.base..The.phone.will.return.to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
.
•.While.a.call.is.on.hold,.Call.Waiting.and.CID.on.Call.Waiting.do.not.work..
Outside call
Conferencing
If.you.have.more.than.one.handset,.up.to.four.people.can.participate.
in.a.conference.call..A.four-way.conference.call.consists.of.an.
outside.line,.two.handsets,.and.the.base..You.can.easily.join.a.call.
already.in.progress..The.handsets.must.be.currently.connected.to.
the.same.base.(see.page.ꢀ4).
Handset #2
ꢀ) Press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.
handset.from.the.base.or.press.[ ].on.the.base.to.join.the.call.
2) To.hang.up,.return.the.handset.to.the.cradle.or.press.[ ].on.the.
handset.or.return.the.corded.handset.to.the.base.or.press.[ ].
on.the.base..The.other.party.will.still.be.connected.to.the.call.
Base
speakerphone
or corded handset
Handset #1
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring a Call
You.can.transfer.a.call.from.one.station.to.another..The.handsets.must.be.currently.connected.to.the.same.base.(see.
page.ꢀ4).
ꢀ) During.a.call,.press.[Clear/Int’com].on.the.handset.or.[Int’com].on.the.base.
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.transfer.the.call.to,.and.then.press.[Menu/Select]..Select.ALL.
to.page.all.other.stations..The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.the.
transfer,.press.[ /Flash].or.[ ].on.the.handset.or.[ ].on.the.base.
3) When.another.station.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,.press..
[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.[ ].on.the.base.again.
Answering a transferred call
When.a.station.receives.a.call.transfer,.it.sounds.a.paging.tone;.stations.also.show.the.ID.of.the.station.that.is.
paging..To.accept.the.call.transfer:
ꢀ) To.answer.the.page.and.speak.to.the.transferring.station,.press.[ /Flash].or.[Clear/Int’com].on.the.handset,.or..
[
].or.[Int’com].on.the.base,.or.pick.up.the.corded.handset.from.the.base.
Note:..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.
2) To.accept.the.call.and.speak.to.the.caller,.press.[ /Flash].on.the.receiving.handset,.or.[ ].on.the.receiving.
base.
3) When.you.accept.the.transferred.call,.the.transferring.station.will.be.disconnected.
Only the first station.to.answer.the.transfer.page.will.be.connected.to.the.call..If.the.transfer.page.is.not.picked.up.
within.one.minute,.the.operation.will.be.canceled.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Special Features
Privacy Mode
Privacy.mode.prevents.other.stations.from.interrupting.while.you’re.on.a.call..As.long.as.your.station.is.in.privacy.
mode,.other.stations.can’t.join.your.call.or.make.any.calls.of.their.own:.their.displays.will.show.UNAVAILABLE.
ꢀ) While.on.a.call,.press.[Menu/Select].
2) Select.CALL.PRIVACY..PRIVACY.MODE.ON.appears.in.the.display.for.two.seconds;. .appears.and.remains.in.
the.display.until.the.feature.is.turned.off.
To.turn.privacy.mode.off,.repeat.the.procedure.listed.above..PRIVACY.MODE.OFF.appears.
Using the Intercom
You.can.use.the.intercom.to.talk.to.another.station.without.using.the.phone.line..The.handsets.must.be.currently.
connected.to.the.same.base.(see.page.ꢀ4).
Making an intercom page
ꢀ) With.the.phone.in.standby,.press.[Clear/Int’com].on.the.handset.or.[Int’com].on.the.base.
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.talk.with,.and.then.press.[Menu/Select]..Select.ALL.to.page.
all.other.stations.
3) To.cancel.the.intercom.page,.press.[ ].on.the.handset.or.[Int’com].on.the.base.
Notes:.Intercom.paging.will.be.cancelled.if.any.of.the.following.things.occur:
• You.receive.an.outside.call.or.an.intercom.page.while.selecting.the.other.station.
• You.do.not.select.a.station.within.thirty.seconds.
• Your.handset.is.out.of.range.(OUT.OF.RANGE.appears.in.the.display).
• The.party.does.not.answer.the.page.within.one.minute.
• The.party.is.busy.
• The.party.is.out.of.range.(UNAVAILABLE.appears.in.the.display).
4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering an intercom page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.station.that.is.paging.
ꢀ) Press.[ /Flash].or.[Clear/Int’com].on.the.handset,.or.[ ].or.[Int’com].on.the.base,.or.pick.up.the.corded.
handset.from.the.base.
Note:. If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.
2) To.hang.up.an.intercom.call,.press.[ ].on.the.handset.or.[Int’com].on.the.base,.or.return.the.corded.handset.to.
the.base.
Muting the Microphone
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..
ꢀ) Press.[ /Mute].on.the.handset.or.[Clear/Mute].on.the.base..MUTE.ON.and. .appear.in.the.display;. .remains.
while.muting.is.on.
2) To.cancel.muting,.press.[ /Mute].on.the.handset.or.[Clear/Mute].on.the.base.again..MUTE.OFF.appears.
Tone Dialing Switch Over
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press [ /tone].
*
on.the.station..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.ends,.the.
phone.automatically.returns.to.pulse.dialing.
See.Changing.the.dial.mode.on.page.ꢀꢀ.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Voice Mail Service
If.you.subscribe.to.a.voice.mail.service,.you.can.use.your.phone.to.access.your.voice.mailbox..When.there.are.
messages.waiting.in.your.voice.mailbox,.the.new message LED on the handset flashes and
.appears.in.both.the.
handset.and.base.displays..
Note: This notification feature supports the voice mail service that uses Frequency Shift Keying (FSK) for the
message notification signal only.
If.you.store.your.access.number.and.password.(provided.by.the.voice.mail.service.you.subscribe.to).in.your.
phonebook,.you.can.quickly.dial.in.and.retrieve.your.messages..(See.page.26.)
Resetting the voice message waiting indicator
When.you.receive.a.new.voice.mail.message,.the.new message LED on the top of the handset flashes and
.
appears.in.the.handset.and.base.display..In.the.event.your.message.waiting.light.gets.out.of.sync.with.your.phone.
company’s.voice.messaging.system,.you.can.manually.reset.it.back.to.the.“No.messages.waiting”.state.
ꢀ) On.the.base,.press.[Menu/Select]..
2) Select.the.GLOBAL.SETUP.menu,.and.then.the.VMWI.RESET.submenu.
3) Move.the.cursor.to.select.YES.or.NO.
4) Press.[Menu/Select]. You will hear a confirmation tone.
Installing the Optional Headset
Your.phone.may.be.used.with.an.optional.headset..To.use.this.feature,.insert.the.
headset.plug.into.the.headset.jack..Your.phone.is.ready.for.hands-free.conversations..
(Headsets.may.be.purchased.by.calling.the.Uniden.Parts.Department..See.the.back.
cover.page.for.contact.information.)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Answering System
You.can.set.up.your.answering.system’s.features.from.the.base.or.handset.with.the.exception.of.changing.the.
outgoing.message.or.greeting;.you.can.only.change.the.greeting.or.record.a.new.greeting.from.the.base..Only.one.
station.at.a.time.can.access.the.answering.system.menus.
Note:.. If.you.set.from.a.handset.and.you.have.multiple.bases,.select.the.base.with.answering.system.you.want.to.
access.(see.page.ꢀ4).
Recording a Personal Greeting
Your.answering.system.comes.with.a.pre-recorded.outgoing.message.or.greeting.that.plays.when.you.receive.a.
call:.“Hello,.no.one.is.available.to.take.your.call..Please.leave.a.message.after.the.tone.”.You.can.record.your.own.
personal.outgoing.greeting..Your.recorded.greeting.must.be.between.two.seconds.and.thirty.seconds.long.
ꢀ) On.the.base,.press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.GREETING.submenu.
3) RECORD.GREETING,.START.[SELECT].appears..Press.[Menu/Select].to.start.the.recording..Begin.recording.
after.the.announcement..The.message counter.on.the.base.LCD.displays.“30”,.and.then.begins.to.count.down.
4) When you finish recording, press [Menu/Select].again.or.press.[
]. You will hear a confirmation tone, and
your.recorded.greeting.plays.back.for.you.
Selecting a Greeting
Once.you.have.recorded.a.personal.greeting,.the.phone.automatically.switches.to.your.personal.greeting..You.can.
also.switch.back.and.forth.between.the.pre-recorded.greeting.and.your.own.greeting.at.any.time.
ꢀ) On.the.base,.press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu,.and.then.the.GREETING.OPTIONS.submenu..
The.system.plays.the.current.greeting.
3) To.keep.this.greeting,.do.nothing.
4) To.switch.to.the.other.greeting,.press.[
].or.[
].on.the.four-way.function.key.while.the.system.is.playing.the.
current.greeting.
5) Each.time.you.press.[
].or.[
],.the.system.switches.between.the.pre-recorded.and.the.personal.greeting..
The.last.greeting.you.hear.is.used.as.the.current.greeting.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Your Personal Greeting
You.can.delete.your.personal.greeting.from.the.base..You.cannot.delete.the.pre-recorded.greeting.
ꢀ) On.the.base,.press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu,.and.then.the.GREETING.OPTIONS.submenu..
The.system.plays.the.current.greeting.
3) While.the.personal.greeting.is.playing,.press.[ ].
4) The.system.announces.“Greeting.has.been.deleted,”.and.switches.back.to.the.pre-recorded.greeting.
Selecting the Language for Announcements
You.can.select.the.language.of.your.answering.system.announcements..The.default.system.language.is.English.
ꢀ) Press.[Menu/Select]..
2) Select.ANSW..SETUP,.and.then.the.ANSW..LANGUAGE.submenu.
3) Move.the.cursor.to.choose.a.language..
for US models:..
Choose.ENGLISH.or.ESPAÑOL.(Spanish)..
for Canadian models:..Choose.ENGLISH.or.FRANÇAIS.(French).
4) Press.[Menu/Select]. You will hear a confirmation tone.
Setting the Number of Rings
The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.system.plays.the.
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS).
setting,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.third.ring.to.
avoid.long.distance.billing.charges.
ꢀ) Press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu,.and.then.the.RING.TIME.submenu.
3) Move.the.cursor.to.select.a.ring.time.(TOLL.SAVER,.2.TIMES,.4.TIMES,.or.6.TIMES).
4) Press.[Menu/Select]. You will hear a confirmation tone.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Day & Time
If.you.do.not.set.the.clock.on.your.answering.system,.your.messages.may.not.have.the.correct.time.and.day.stamp..
ꢀ) Press.[Menu/Select].
2) Move.the.cursor.to.DAY.&.TIME.and.press.[Menu/Select].
3) Use.[ ].and.[ ].to.select.the.day.of.the.week,.and.press.[Menu/Select].
4) Use.the.number.keypad.([0].through.[9]).to.enter.the.hour.and.minutes.
5) Use.[ ].and.[ ].to.select.AM.or.PM,.and.press.[Menu/Select]. You hear a confirmation tone.
Notes:.•.You.can.set.the.day.and.time.from.the.handset,.but.the.day.and.time.do.not.appear.on.the.handset.display..
.
•.If.the.power.goes.out.on.the.base,.the.day.and.time.setting.will.be.erased,.and.you.must.set.the.clock.
again.”
Setting the Record Time (or Announce only)
You.can.choose.how.long.callers.have.to.record.a.message..Set.the.record.time.to.ꢀ.MINUTE.or.4.MINUTES.to.limit.
the.time.for.incoming.messages..If.you.set.the.record.time.to.ANNOUNCE.ONLY,.the.answering.system.answers.the.
call.but.prevents.callers.from.leaving.a.message.
ꢀ) Press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.TIME.submenu.
3) Move.the.cursor.to.select.a.record.time.(ꢀ.MINUTE,.4.MINUTES,.or.ANNOUNCE.ONLY).
4) Press.[Menu/Select]. You will hear a confirmation tone.
While.your.answering.system.is.set.to.ANNOUNCE.ONLY,.the.message counter.on.the.base.LCD.displays.“A.”.If.
you.are.using.the.prerecorded.greeting,.the.system.automatically.switches.to.the.following.message:.“Hello,.no.one.
is.available.to.take.your.call..Please.call.again.”.If.you.are.using.a.personal.greeting,.the.system.continues.to.use.
that.greeting.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating the Message Alert
The message alert feature sounds a short alert tone every fifteen seconds whenever you have a new message.
To.turn.on.the.message.alert:
ꢀ) Press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu,.and.then.the.MESSAGE.ALERT.submenu.
3) Move.the.cursor.to.select.ON.or.OFF.
4) Press.[Menu/Select]. You will hear a confirmation tone.
Activating the Base Call Screen
With.the.call.screen.feature,.you.can.listen.to.callers.as.they.leave.a.message.without.answering.the.call.
ꢀ) Press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu.and.then.the.CALL.SCREEN.submenu.
3) Move.the.cursor.to.select.ON.or.OFF.
4) Press.[Menu/Select]. You will hear a confirmation tone.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Answering System
Turning Your Answering System On and Off
From the base
From the handset
ꢀ) Press.[Menu/Select]..
ꢀ) With.the.phone.in.standby,.press..
[Answer on/off].
2) Select.the.ANSW..SETUP.menu,.and.then.
2) The.system.announces.“Answering.System.
the.ANSWER.SETUP.submenu.
Turning.On
is.on”.and.plays.the.current.greeting.
3) Move.the.cursor.to.select.ON.
3) ANSWER.ON.appears.on.the.base.display.
4) Press.[Menu/Select]..You.will.hear.a.
confirmation tone.
ꢀ) With.the.phone.in.standby,.press..
ꢀ) Press.[Menu/Select]..
[Answer on/off].
2) Select.the.ANSW..SETUP.menu,.and.then.
2) The.phone.announces.“Answering.System.
the.ANSWER.SETUP.submenu.
Turning.Off
is.off.”
3) Move.the.cursor.to.select.OFF.
3) ANSWER.OFF.appears.on.the.base.display.
4) Press.[Menu/Select]..You.will.hear.a.
confirmation tone.
Note:.. If.the.answering.system.announces.“No.remaining.time”.when.you.turn.it.on,.the.memory.is.full.(the.message.
counter.also.shows.FL)..The.answering.system.can’t.record.any.new.messages.until.you.delete.some.of.the.
saved.ones.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing Messages
The.message counter.on.the.base.LCD.displays.the.number.of.messages.stored.in.memory..When.you.have.new.
messages.(that.you.have.not.listened.to.yet),.[
].on.the.base.and.the.new message LED on the handset flash.
The answering system plays your new messages first. If you have no new messages, the system plays your old
messages..You.can.review.your.messages.from.the.base.or.from.the.handset:
From the base
From the handset
Press.[
]..The.system.announces.the.
Press.[ /Mute]..The.system.announces.the.
number.of.new.and.old.messages,.then.plays.the.
first new message followed by the day and time
number.of.new.and.old.messages,.then.plays.
the first new message followed by the day and
Playing.new.
messages
time.it.was.received..Then.the.system.plays.the. it.was.received..Then.the.system.plays.the.new.
new.messages.in.the.order.they.were.received. messages.in.the.order.they.were.received..
Press [
current.message..Press.[
back.to.a.previous.message..
].once.to.go.to.the.beginning.of.the.
Press.[1].once.to.go.to.the.beginning.of.the.
].repeatedly.to.go. current.message..Press.[1].repeatedly.to.go.back.
to.a.previous.message.
Repeating
a.message
Skipping
a.message message..
Press.[
].to.go.to.the.beginning.of.the.next.
Press.[3].to.go.to.the.beginning.of.the.next.
message.
Deleting
While.a.message.is.playing,.press.[ ]...
While.a.message.is.playing,.press.[4].
The.message.is.permanently.deleted..
a.message The.message.is.permanently.deleted..
While.the.phone.is.in.standby,.press.[ ]...When.
Deleting.all.
the system asks you to confirm, press [ ].
messages
Not.available.
again..All.messages.are.permanently.deleted.
Playing.old. After.you.listen.to.your.new.messages,.press..
After.you.listen.to.your.new.messages,.press..
messages
[
].again.to.play.your.old.messages.
[
/Mute].again.to.play.your.old.messages.
Ending.the.
message.
review
Press.[5].to.stop.the.message.playback.
Press.[ ].to.exit.the.system.and.return.to.standby,.
or.press.[2].to.restart.the.message.playback.
Press.[
return.to.standby..
].to.stop.the.message.playback.and.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Screening Calls
From the base
From the handset
• While.the.system.is.taking.the.message,.simply. • While.the.systems.is.recording.the.message,.press..
listen.to.the.caller.over.the.base.speaker..
• To.answer.the.call.and.speak.to.the.caller,.pick.
up.the.corded.handset.from.the.base.or.press...
[
/Mute]..If.another.handset.is.screening.a.call,.you.will.
hear.a.beep.and.you.will.not.be.able.to.screen.the.call.
• To.answer.the.call.and.speak.to.the.caller,.press.[ /Flash].
• To.mute.the.call.screen.and.allow.the.caller.to.continue.
leaving.the.message,.press.[ ].or.return.the.handset.to.the.
cradle.
[
].
• To.mute.the.call.screen.and.allow.the.caller.to.
continue.leaving.the.message,.press.[ ].
Turning Off the Message Alert Tone
When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.
deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.
Operating the Answering System While You Are Away from Home
When.you.are.away.from.home,.you.can.operate.your.answering.system.with.any.touch-tone.telephone.
Setting a security code or Personal Identification Number (PIN)
To.operate.your.answering.system.when.you.are.away.from.home,.you.will.need.to.enter.a.two-digit.security.code.or.
Personal Identification Number (PIN). The default security code is 80.
ꢀ) Press.[Menu/Select]..
2) Select.the.ANSW..SETUP.menu,.and.then.the.SECURITY.CODE.submenu.
3) Use.the.number.keypad.([0].through.[9]).to.enter.a.two-digit.security.code.(0ꢀ-99).
4) Press.[Menu/Select]. You will hear a confirmation tone.
Dialing in to your answering system
Note:. If.you.enter.an.incorrect.security.code/PIN.three.times,.you.will.hear.a.beep.and.the.answering.system.will.
return.to.standby.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
To.operate.from.a.remote.location,.use.any.touch-tone.telephone,.and.follow.these.steps:
ꢀ) Call.your.telephone.number.and.wait.for.the.system.to.answer..If.the.answering.system.is.off,.it.will.answer.after.
about.ten.rings.and.sounds.a.series.of.beeps.
2) During.the.greeting.or.the.beeps.(if.answering.system.is.off),.press.[0].and.enter.your.security.code/PIN.within.
two.seconds.
3) The.answering.system.announces.the.current.time.and.the.number.of.messages.stored.in.memory..
You.hear.“To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero”.followed.by.a.beep.
4) Enter a remote command from the chart below. You have fifteen seconds to enter the first command; after the
first command, you have two seconds to enter each command.
If you want to
Press
If you want to
Press
[0].then.[2].
The.answering.system.plays.back.
messages.for.four.minutes,.then.
waits.for.another.command..To.
continue.playing.your.messages,.
press.[0].then.[2].again.
Play.incoming.
messages
Stop.the.current.operation.to.
enter.a.different.command.
[0].then.[5]
[0].then.[1] (after the first four
seconds.of.this.message)
Repeat.this.message.
Turn.the.answering.system.off
Turn.the.answering.system.on
[0].then.[9]
Go.back.to.the.
previous.message
[0].then.[1] during the first four
seconds.of.a.message.
[0].then.[6]
Skip.this.message
[0].then.[3]
Listen.to.the.help.prompts
Exit.the.system
[1].then.[0]
Delete.this.message [0].then.[4]
Hang.up.
5) When you finish, you will hear intermittent beeps indicating that the system is in the command waiting mode.
Enter another command from the chart within fifteen seconds.
6) Hang.up.to.exit.the.system..The.answering.system.automatically.returns.to.its.normal.standby.setting.
5ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
Operating temperature 32°.F.to.ꢀ22°.F.(0°.C.to.50°.C)
Base
Charging cradle
PS-0007
Part number
Input voltage
Output voltage
Part number
Capacity
PS-0009
AC adapter
ꢀ20V.AC,.60.Hz
BT-ꢀ008
ꢀ20V.AC,.60.Hz
Battery pack
650mAh,.2.4V.DC.
Notes:
• Use.only.the.supplied.AC.adapters.
• Be.sure.to.use.the.proper.adapter.for.the.base.and.any.chargers.
• Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or
electrical.hazard.
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.
Battery Information
Battery life
With.average.use,.your.handset.battery.provides.approximately.ten.hours.of.talk.time.and.approximately.seven.days.
of.standby.time..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.charging.
cradle.after.each.use..When.your.handset.is.left.off.of.the.cradle,.the.battery.will.gradually.discharge.even.if.the.
handset.is.not.being.used..The.actual.talk.time.duration.will.be.reduced.in.proportion.to.the.amount.of.time.the.
handset.is.off.of.the.cradle.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Low battery alert
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.
order.to.save.power..When.LOW.BATTERY.appears.in.the.handset.display.and.the.
phone.is.in.standby,.none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.your.
conversation.as.quickly.as.possible,.and.return.the.handset.to.the.cradle.
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.
Cleaning the charging contacts
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.
thoroughly.before.returning.the.handset.to.the.cradle.
Caution: Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..
Doing so may discolor the surface of the telephone and damage the finish.
Battery replacement and handling
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.
contact.Uniden’s.Parts.Department..The.contact.information.is.listed.on.the.back.cover.page.
Caution:
• Use.only.battery.pack.BT-ꢀ008..
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..
• Never throw the battery into a fire, disassemble, or heat them.
• Do.not.remove.or.damage.the.battery.casing..
Power Failures
During.a.power.failure,.you.can.make.and.receive.calls.with.the.base.corded.handset;.however,.you.will.not.be.able.
to.use.the.base.speakerphone.or.the.cordless.handset..See.page.3ꢀ.for.available.features.with.the.base.corded.
handset.during.a.power.failure.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your.problem,.please.call.our.Customer.Hotline.(see.the.back.cover.for.contact.information).
When you have this
Try...
problem...
The.charge.LED.won’t.
• Checking.the.AC.adapter.connection.(see.page.7).
illuminate.when.the.cordless.
• Re-seating.the.cordless.handset.in.the.cradle..
handset.is.placed.in.the.
• Cleaning.the.charging.contacts.on.the.handsets.(see.page.53)..
cradle.
• Moving.the.cordless.handset.closer.to.the.base.
• Moving.the.handset.and/or.base.away.from.metal.objects.or.appliances.and.try.
The.audio.sounds.weak..
again.
• Checking.the.telephone.cord.connection..If.CHECK.TEL.LINE.appears.on.the.
base.display,.the.telephone.cord.may.not.be.connected.correctly.(see.page.9).
• Disconnecting.the.base.AC.adapter..Wait.a.few.minutes,.then.reconnect.it.(see.
page.8).
No.stations.can.make.or.
receive.calls..
• Changing.the.dial.mode.(see.page.ꢀꢀ).
• Checking.the.battery.pack.connection.(see.page.6).
• Charging.the.battery.for.ꢀ5.to.20.hours.
• Moving.the.cordless.handset.closer.to.the.base.
• Making.sure.the.line.is.not.in.use..If.an.outside.call.is.already.using.a.line,.you..
cannot.use.that.line.to.make.another.outside.call.
• Resetting.the.handset.(see.page.56).
A.single.cordless.handset.
can’t.make.or.receive.calls.
(but.other.stations.can).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
When you have this
problem...
Try...
A.station.can.make.calls,.but.
it.doesn’t.ring.or.receive.a.
page.
• Making.sure.the.ringer.isn’t.turned.off.(see.page.37)..
• Making.sure.to.use.the.base.corded.handset.to.make.or.receive.a.call.(see.page.
3ꢀ).
• Checking.the.telephone.cord.connection.(see.page.9).
During.power.failure,.can’t.
make.or.receive.a.call.
• Keeping.all.handsets.away.from.microwave.ovens,.computers,.wireless.LAN.
station,.remote.control.toys,.wireless.microphones,.alarm.systems,.intercoms,.
room monitors, fluorescent lights, and electrical appliances (see page 5).
• Moving.the.base.to.another.location.or.turn.off.the.source.of.interference.
Severe.noise.interference.
• Checking.to.see.if.the.call.was.placed.through.a.switchboard.
• Asking.your.telephone.company.to.verify.your.Caller.ID.service.is.current..There.
may.be.a.problem.with.your.Caller.ID.service.
The.Caller.ID.does.not.
display..
I.can’t.register.the.handset.at. • Charging.the.battery.for.ꢀ5.to.20.hours.
the.base.
• Resetting.the.handset.(see.page.56).
The.handset.doesn’t.
communicate.with.other.
handsets..
• Register.all.handsets.to.the.same.base,.and.then.select.the.same.base.on.all.
handsets.(see.pages.ꢀ3.and.ꢀ4).
• Checking.to.see.that.there.are.not.two.cordless.handsets.already.using.the.
conference.feature.(see.page.39).
• Checking.to.see.that.another.station.is.not.in.privacy.mode.(see.page.4ꢀ).
• Register.all.handsets.to.the.same.base,.and.then.select.the.same.base.on.all.
handsets.(see.pages.ꢀ3.and.ꢀ4).
I.can’t.join.the.conversation.
The.answering.system.does. • Checking.the.AC.adapter.connection.(see.page.8)..
not.work.
• Checking.to.see.if.the.answering.system.is.turned.on.(see.page.48).
55
Download from Www.Somanuals.com. All Manuals Search And Download.
When you have this
problem...
Try...
•
•
The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages.(see.page.49).
Checking.to.see.that.the.message.record.time.is.not.set.to.announce.only.(see.
The.answering.system.does.
not.record.any.messages.
page.46)
.
The.answering.system.
doesn’t.say.what.time.
messages.were.recorded.
• Checking.to.see.if.you.have.set.the.time.(see.page.46).
• The.incoming.messages.may.be.too.long..Ask.callers.to.leave.a.brief.message.
Messages.are.incomplete..
•
The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages.(see.page.49).
I.can’t.hear.base.or.handset.
speaker.during.call.screening.
or.message.playback.
• Adjusting.the.speaker.volume.on.the.base.or.handset.(see.page.38).
• Checking.to.see.if.the.call.screen.feature.is.set.to.on.(see.page.47).
I.can’t.access.answering.
system.from.a.remote.
phone..
• Checking.to.see.if.you.are.using.the.correct.PIN.number.(see.page.50).
• Checking.to.see.if.the.touch-tone.phone.you’re.using.can.transmit.the.tone.for.at.
least.two.seconds..If.it.cannot,.try.using.a.different.touch-tone.phone.
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as.“Handset.#4”.but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ) Select.the.base.you.want.to.de-register.the.handset.from.(see.Selecting.the.base.on.page.ꢀ4).
2) Press.and.hold.[ ].and.[#] for more than five seconds. Select DEREGISTER HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.[Menu/Select].
4) The phone will ask you to confirm the deregistration. Select YES. The selected handset will clear its registration
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5) When.the.base.information.is.deleted,.the.handset.displays.HANDSET.NOT.REGISTERED-PLACE.HANDSET.
ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP.
6) Re-register.the.handset.to.the.base.(see.Registering.accessory.handsets.on.page.ꢀ2)..
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power;.you.can.also.reset.the.handset.without.the.base.(see.the.next.section).
Resetting the Handset Without the Base
If.your.original.base.is.not.available.for.some.reason,.you.can.still.reset.the.handset.and.use.it.with.another.base.
ꢀ) Press.and.hold.[ ].and.[#] for at least five seconds.
2) Move.the.cursor.to.select.BASE.UNAVAILABLE.and.then.press.[Menu/Select].
3) Select.the.base.which.you.want.to.de-register.from,.and.then.press.[Menu/Select]..BASE.UNAVAILABLE.
appears.
4) Move.the.cursor.to.select.YES,.and.then.press.[Menu/Select]. You hear a confirmation tone, and the
handset.deletes.its.own.base.information.without.contacting.the.base..The.handset.displays.HANDSET.NOT.
REGISTERED-PLACE.HANDSET.ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP..
5) Register.the.handset.to.the.new.base.(see.Registering.accessory.handsets.on.page.ꢀ2).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Line Mode for Multiple Extensions
Line.mode.refers.to.the.method.that.telephones.use.to.signal.each.other.that.an.extension.is.in.use..Customer.
service.may.recommend.changing.the.line.mode.if.you.have.any.of.the.following.problems:
• Your.phone.keeps.ringing.after.someone.answers.on.an.extension.phone.
• Your.answering.system.doesn’t.stop.recording.when.you.answer.on.an.extension.phone.
• Caller ID displays briefly and then clears.
ꢀ) If.you.set.from.a.handset.and.you.have.multiple.bases,.select.the.base.that.is.having.problems.(see.page.ꢀ4).
2) Press.[Menu/Select]..
3) Select.the.GLOBAL.SETUP.menu,.and.then.the.SET.LINE.MODE.submenu..
4) IF.INSTRUCTED.BY.CUSTOMER.SERVICE.PRESS.[SELECT].appears..Press.[Menu/Select].
5) Move.the.cursor.to.select.TYPE.-.A,.TYPE.-.B,.or.OFF.
6) Press.[Menu/Select]. You will hear a confirmation tone.
Traveling Out of Range
When.the.handset.is.in.standby,.the.handset.will.display.OUT.OF.RANGE.
During.a.call,.if.you.move.your.handset.too.far.from.your.base,.noise.may.increase..If.you.pass.the.range.limit.of.the.
base,.the.handset.will.beep,.display.OUT.OF.RANGE,.and.then.go.to.standby..The.base.will.maintain.the.connection.
for.thirty.seconds.after.the.handset.goes.out.of.range..If.you.move.the.handset.back.within.range.of.the.base.within.
thirty.seconds,.press.[ /Flash].or.[ ].to.pick.up.the.call.again.
Note:.. If.it.is.set.to.automatically.select.the.available.base,.the.handset.will.begin.searching.for.another.base.thirty.
seconds.after.going.out.of.range..(see.Selecting.the.base.on.page.ꢀ4).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid Damage
Moisture.and.liquid.can.damage.your.cordless.phone.
• If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.
the.liquid,.and.use.as.normal..
• If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.
handset.battery.compartment.or.vent.openings.on.the.base),.follow.the.steps.below:
Cordless Handset
Base
ꢀ) Remove.the.battery.cover.and.leave.it.off.for.
ꢀ) Disconnect.the.AC.adapter.from.the.base,.cutting.
ventilation.
off.electrical.power.
2) Disconnect.the.battery.pack..Leave.the.battery.
cover.off.and.the.battery.pack.disconnected.for.at.
least.3.days.
2) Disconnect.the.telephone.cord.from.the.base.
3) Let.dry.for.at.least.3.days..
3) Once.the.handset.is.completely.dry,.reconnect.the.
battery.pack.and.the.battery.cover.
4) Recharge.the.handset’s.battery.pack.for.ꢀ5.to.20.
hours.before.using..
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven. After following these steps, if your
cordless telephone does not work, please call our Customer Service Hotline (see the back cover
page).
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
Precautions!
The.cords.on.this.product.and/or.accessories.contain.lead,.a.
chemical.known.to.the.State.of.California.to.cause.birth.defects.
or.other.reproductive.harm..Wash.hands.after.handling.
Before.you.read.anything.else,.please.observe.the.following:
Warning!
Uniden.America.Corporation.DOES.NOT.represent.this.unit.
to be waterproof. To reduce the risk of fire, electrical shock,
or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.
moisture..
Important Safety Instructions
When.using.your.telephone.equipment,.basic.safety.
precautions should always be followed to reduce the risk of fire,
electric.shock.and.injury.to.persons,.including.the.following:.
Rechargeable Nickel-Metal-Hydride
Battery Warning
ꢀ. Do.not.use.this.product.near.water,.for.example,.near.
a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.
wet.basement.or.near.a.swimming.pool..
•
•
•
This.equipment.contains.a.rechargeable.Nickel-Metal-
2. Avoid.using.a.telephone.(other.than.a.cordless.type).
during.an.electrical.storm..There.may.be.a.remote.risk.
of.electric.shock.from.lightning..
Hydride.battery..
The.rechargeable.batteries.contained.in.this.equipment.
may explode if disposed of in a fire.
Nickel.is.a.chemical.known.to.state.of.California.to.cause.
cancer..
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.
vicinity.of.the.leak..
4. Use.only.the.power.cord.and.batteries.indicated.in.
this manual. Do not dispose of batteries in a fire. They
may.explode..Check.with.local.authorities.for.possible.
battery.disposal.instructions..
•
•
Do.not.short-circuit.the.battery..
Do.not.charge.the.rechargeable.battery.pack.used.in.
this.equipment.with.in.any.charger.other.than.the.one.
designed to charge this battery pack as specified in the
owner's.manual..Using.another.charger.may.damage.the.
battery.pack.or.cause.the.battery.pack.to.explode..
5. Do.not.disassemble.any.component.of.this.product.
SAVE THESE INSTRUCTIONS
CAUTION
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..
Dispose.of.used.batteries.according.to.the.instructions..Do.not.
open.or.mutilate.the.battery,.and.disconnect.the.battery.before.
shipping.this.product.
Properly.
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.
in.our.products.and.accessories.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.replacement.
section);.otherwise.do.not.substitute.or.repair.any.parts.of.the.device.
except as specified in this manual. Connection to party line service is
subject.to.state.tariffs..Contact.the.state.public.utility.commission,.public.
service.commission.or.corporation.commission.for.information..This.
equipment.is.hearing.aid.compatible.
The FCC Wants You To Know
This.equipment.complies.with.Part.68.of.the.FCC.rules.and.the.
requirements.adopted.by.the.ACTA..On.the.bottom.of.this.equipment.
is a label that contains, among other information, a product identifier
in.the.format.US:.AAAEQ##TXXXX..If.requested,.this.number.must.be.
provided.to.the.telephone.company.
An applicable Universal Service Order Codes (USOC) certification
for.the.jacks.used.in.this.equipment.is.provided.(i.e.,.RJꢀꢀC).in.the.
packaging.with.each.piece.of.approved.terminal.equipment..A.plug.
and.jack.used.to.connect.this.equipment.to.the.premises.wiring.and.
telephone.network.must.comply.with.the.applicable.FCC.Part.68.rules.
and.requirements.adopted.by.the.ACTA..A.compliant.telephone.cord.
and.modular.plug.is.provided.with.this.product..It.is.designed.to.be.
connected.to.a.compatible.modular.jack.that.is.also.compliant..See.
installation.instructions.for.details.
Should.you.experience.trouble.with.this.equipment,.please.contact.
Uniden.customer.service.at.800-297-ꢀ023..If.the.equipment.is.causing.
harm.to.the.telephone.network,.the.telephone.company.may.request.that.
you.disconnect.the.equipment.until.the.problem.is.resolved..
NOTICE:.According.to.telephone.company.reports,.AC.electrical.surges,.
typically.resulting.from.lightning.strikes,.are.very.destructive.to.telephone.
equipment.connected.to.AC.power.sources..To.minimize.damage.from.
these.types.of.surges,.a.surge.arrestor.is.recommended.
Changes or modifications to this product not expressly approved by
Uniden,.or.operation.of.this.product.in.any.way.other.than.as.detailed.by.
the.owner’s.manual,.could.void.your.authority.to.operate.this.product.
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.call..In.
most but not all areas, the sum of RENs should not exceed five (5.0).
To.be.certain.of.the.number.of.devices.that.may.be.connected.to.a.line,.
as.determined.by.the.total.RENs,.contact.the.telephone.provider..For.
products.approved.after.July.23,.200ꢀ,.the.REN.for.this.product.is.part.
of the product identifier that has the format US:AAAEQ##TXXXX. The
digits.represented.by.##.are.the.REN.without.a.decimal.point.(e.g.,.03.
is.a.REN.of.0.3)..For.earlier.products,.the.REN.is.separately.shown.on.
the.label.
This.device.complies.with.part.ꢀ5.of.the.FCC.rules..Operation.is.subject.
to.the.following.two.conditions:.(ꢀ).This.device.may.not.cause.harmful.
interference,.and.(2).This.device.must.accept.any.interference.received,.
including.interference.that.may.cause.undesired.operation..Privacy.of.
communications.may.not.be.ensured.when.using.this.phone.
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.for.
the.amount.of.radio.frequency.energy.various.products.may.produce.
depending.on.their.intended.usage..This.product.has.been.tested.
and.found.to.comply.with.the.FCC’s.exposure.criteria..For.body.worn.
operation,.the.FCC.RF.exposure.guidelines.were.also.met.when.used.
with.the.Uniden.accessories.supplied.or.designed.for.this.product..Use.
of.other.accessories.may.not.ensure.compliance.with.FCC.RF.exposure.
guidelines.and.should.be.avoided.
If.this.equipment.causes.harm.to.the.telephone.network,.the.telephone.
company.will.notify.you.in.advance.that.temporary.discontinuance.
of.service.may.be.required..But.if.advance.notice.isn’t.practical,.the.
telephone.company.will.notify.the.customer.as.soon.as.possible..Also,.
you will be advised of your right to file a complaint with the FCC if you
believe.it.is.necessary..The.telephone.company.may.make.changes.in.
its.facilities,.equipment,.operations.or.procedures.that.could.affect.the.
operation.of.the.equipment..If.this.happens.the.telephone.company.will.
provide advance notice in order for you to make necessary modifications
to.maintain.uninterrupted.service.
The.antenna(s).used.for.the.base-unit.must.be.installed.to.provide.a.
separation.distance.of.at.least.20.cm.from.all.persons.and.must.not.
be.collocated.or.operated.in.conjunction.with.any.other.antenna.or.
transmitter.
If.your.home.has.wired.alarm.equipment.connected.to.a.phone.line,.be
6ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
sure.that.installing.the.system.does.not.disable.your.alarm.equipment..
If.you.have.questions.about.what.will.disable.alarm.equipment,.contact.
your telephone company or a qualified installer.
I.C. Notice
Terminal equipment
NOTICE:.This.equipment.meets.the.applicable.Industry.
Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was
performed.based.on.a.Declaration.of.Conformity.indicating.that.
Industry Canada technical specifications were met. It does not
imply.that.Industry.Canada.approved.the.equipment.
Radio interference
Radio.interference.may.occasionally.cause.buzzing.and.
humming.in.your.cordless.handset,.or.clicking.noises.in.the.
base..This.interference.is.caused.by.external.sources.such.
as TV, refrigerator, vacuum cleaner, fluorescent lighting, or
electrical.storm..Your.unit.is.NOT.DEFECTIVE..If.these.noises.
continue.and.are.too.distracting,.please.check.around.your.
home.to.see.what.appliances.may.be.causing.the.problem..
In.addition,.we.recommend.that.the.base.not.be.plugged.
into.a.circuit.that.also.powers.a.major.appliance.because.of.
the.potential.for.interference..In.the.unlikely.event.that.you.
consistently.hear.other.voices.or.distracting.transmissions.on.
your.phone,.you.may.be.receiving.radio.signals.from.another.
cordless.telephone.or.other.source.of.interference.
Finally,.it.should.be.noted.that.some.cordless.telephones.
operate.at.frequencies.that.may.cause.interference.to.nearby.
TVs.and.VCRs..To.minimize.or.prevent.such.interference,.the.
base.of.the.cordless.telephone.should.not.be.placed.near.or.on.
top.of.a.TV.or.VCR..If.interference.is.experienced,.moving.the.
cordless.telephone.farther.away.from.the.TV.or.VCR.will.often.
reduce.or.eliminate.the.interference..
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.
terminal.equipment.is.marked.on.the.equipment.itself..The.REN.
assigned.to.each.terminal.equipment.provides.an.indication.
of.the.maximum.number.of.terminals.allowed.to.be.connected.
to.a.telephone.interface..The.termination.on.an.interface.may.
consist.of.any.combination.of.devices.subject.only.to.the.
requirement.that.the.sum.of.the.Ringer.Equivalence.Numbers.
of all the devices does not exceed five.
Radio equipment
The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
Operation.is.subject.to.the.following.two.conditions:.(ꢀ).this.
device.may.not.cause.interference,.and.(2).this.device.must.
accept.any.interference,.including.interference.that.may.cause.
undesired.operation.of.the.device..“Privacy.of.communications.
may.not.be.ensured.when.using.this.telephone.”
Cordless telephone privacy
Cordless.telephones.are.radio.devices..Communications.
between.the.handset.and.base.of.your.cordless.telephone.are.
accomplished.by.means.of.radio.waves.which.are.broadcast.
over.the.open.airways..Because.of.the.inherent.physical.
properties.of.radio.waves,.your.communications.can.be.
received.by.radio.receiving.devices.other.than.your.own..
cordless.telephone.unit..Consequently,.any.communications.
using.your.cordless.telephone.may.not.be.private.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
A.PARTICULAR.PURPOSE..THIS.WARRANTY.DOES.
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.
OR.PAYMENT.OF.INCIDENTAL.OR.CONSEQUENTIAL.
DAMAGES..
One Year Limited Warranty
Important:.Evidence.of.original.purchase.is.required.for.
warranty.service..WARRANTOR:.UNIDEN.AMERICA.
CORPORATION.(“Uniden”).ELEMENTS.OF.WARRANTY:.
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.
this.Uniden.Product.to.be.free.from.defects.in.materials.and.
craftsmanship.with.only.the.limitations.or.exclusions.set.out.
below..WARRANTY.DURATION:.This.warranty.to.the.original.
user.shall.terminate.and.be.of.no.further.effect.ꢀ2.months.
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.
or necessary, (B) modified, altered, or used as part of any
conversion kits, subassemblies, or any configurations not sold
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.
someone.other.than.an.authorized.Uniden.service.center.for.a.
defect.or.malfunction.covered.by.this.warranty,.(E)
Some.states.do.not.allow.this.exclusion.or.limitation.of.
incidental.or.consequential.damages.so.the.above.limitation.or.
exclusion.may.not.apply.to.you.
LEGAL REMEDIES: This warranty gives you specific legal
rights,.and.you.may.also.have.other.rights.which.vary.from.
state.to.state..This.warranty.is.void.outside.the.United.States.
of.America.and.Canada..PROCEDURE.FOR.OBTAINING.
PERFORMANCE.OF.WARRANTY:.If,.after.following.the.
instructions.in.the.owner’s.manual.you.are.certain.that.the.
Product.is.defective,.pack.the.Product.carefully.(preferably.
in.its.original.packaging)..Disconnect.the.battery.from.the.
Product.and.separately.secure.the.battery.in.its.own.separate.
packaging.within.the.shipping.carton..The.Product.should.
include.all.parts.and.accessories.originally.packaged.with.the.
Product..Include.evidence.of.original.purchase.and.a.note.
describing.the.defect.that.has.caused.you.to.return.it..The.
Product.should.be.shipped.freight.prepaid,.by.traceable.means,.
to.warrantor.at:.
used.in.any.conjunction.with.equipment.or.parts.or.as.part.of.
any.system.not.manufactured.by.Uniden,.or.(F).installed.or.
programmed.by.anyone.other.than.as.detailed.by.the.owner’s.
manual.for.this.product..STATEMENT.OF.REMEDY:.In.the.
event.that.the.product.does.not.conform.to.this.warranty.at.
any.time.while.this.warranty.is.in.effect,.warrantor.will.either,.
at.its.option,.repair.or.replace.the.defective.unit.and.return.
it.to.you.without.charge.for.parts,.service,.or.any.other.cost.
(except.shipping.and.handling).incurred.by.warrantor.or.its.
representatives.in.connection.with.the.performance.of.this.
warranty..Warrantor,.at.its.option,.may.replace.the.unit.with.
a.new.or.refurbished.unit..THE.LIMITED.WARRANTY.SET.
FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.WARRANTY.
PERTAINING.TO.THE.PRODUCT.AND.IS.IN.LIEU.OF.
AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.ANY.
NATURE.WHATSOEVER,.WHETHER.EXPRESS,.IMPLIED.
OR.ARISING.BY.OPERATION.OF.LAW,.INCLUDING,.
BUT.NOT.LIMITED.TO.ANY.IMPLIED.WARRANTIES.OF.
MERCHANTABILITY.OR.FITNESS.FOR
Uniden America Service
4700.Amon.Carter.Blvd.
Fort.Worth,.TX.76ꢀ55
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement.and.handling....... 53
Belt.clip..........................................ꢀꢀ
H
Index
Handset
A
Accessory.handsets.................. ꢀ2
C
Banner...................................... 30
Choosing.a.ringer...................... 30
Copying.phonebook.entries...... 29
Entering.text.............................. 23
Finding...................................... 39
Parts.of.the.handset.................. ꢀ9
Reading.the.display.................. 2ꢀ
Registering.......................... ꢀ2, ꢀ3
Resetting............................. 56, 57
Hanging.up................................... 32
Headset........................................ 43
Hold.............................................. 39
Accessibility.................................... 4
Accessory.handsets..................... ꢀ2
Answering.calls............................ 32
Answering.system
Reviewing.messages................ 49
Setting.up.................................. 44
Turning.on/off............................ 48
When.away.from.home............. 50
Any.key.answer............................ 3ꢀ
Area.code..................................... 35
Audio.tone.................................... 38
AutoTalk........................................ 3ꢀ
Caller.ID....................................... 34
Deleting.Caller.ID.records......... 35
Making.calls.from...................... 34
Call.screening......................... 47, 50
Call.waiting................................... 36
Chain.dialing................................. 33
Conferencing................................ 39
D
Day.and.time................................ 46
Dial.mode................................ꢀꢀ, 42
F
I
B
FCC.statements........................... 6ꢀ
Finding.a.handset......................... 39
Four-way.function.key.................. 22
Installation...................................... 5
Intercom....................................... 4ꢀ
Banner.......................................... 30
Base
Installing...................................... 8
Multiple.bases........................... ꢀ3
Parts.of.the.base....................... 20
Reading.the.display.................. 2ꢀ
Wall.mounting........................... ꢀ5
Battery
Battery.life................................. 52
Installing...................................... 6
Low.battery.alert....................... 53
K
G
Key.touch.tone............................. 25
Greetings
Deleting..................................... 45
Recording.................................. 44
Selecting................................... 44
64
Download from Www.Somanuals.com. All Manuals Search And Download.
L
P
S
Language
Answering.system.
Personal identification number .
(PIN)...................................... 50
Personal.ring.......................... 25, 27
Phonebook................................... 26
Copying.entries......................... 29
Creating.new.entries................. 26
Deleting.entries................... 28, 29
Editing.entries........................... 27
Finding.entries.......................... 27
Making.a.call.from..................... 33
Storing.Caller.ID.or.redial.
Safety.notices............................... 60
Screening.calls....................... 47, 50
Security.code................................ 50
Selecting.the.base........................ ꢀ4
Seven-digit.dialing........................ 35
announcements.................. 45
Display...................................... 24
Line.mode.for.base....................... 58
Liquid.damage.............................. 59
Low.battery.alert........................... 53
T
Text,.entering................................ 23
Tone.dialing.............................ꢀꢀ, 42
Transferring.a.call......................... 40
Troubleshooting............................ 54
M
Maintenance................................. 52
Making.calls.................................. 32
Using.Caller.ID.......................... 34
Using.redial............................... 36
Using.the.phonebook................ 33
Message.alert......................... 47, 50
Multiple.bases.............................. ꢀ3
Mute
numbers............................. 28
Privacy.mode................................ 4ꢀ
Pulse.dialing............................ꢀꢀ, 42
V
Voice.mail.service......................... 43
Volume,.adjusting......................... 37
R
W
Redial
Microphone............................... 42
Ringer....................................... 37
Deleting.a.record....................... 36
Making.a.calls.with.................... 36
Ringer
Wall.mounting.the.base................ ꢀ5
Warranty....................................... 63
O
Choosing.a.handset.ringer........ 30
Muting....................................... 37
Personal.ring....................... 25, 27
Volume...................................... 37
Out.of.range................................. 58
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
away from home
Remote access
away from home
Turn on the answering
system remotely
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
away from home
Remote access
away from home
Turn on the answering
system remotely
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
C U T
C U T
Task
Key
Task
Key
Repeat a Message
Repeat a Message
Play Incoming Messages
Skip a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
C U T
C U T
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Key
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Key
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|