Uniden Cordless Telephone DCX150 Series User Manual

UNIDEN  
CORDLESS  
TELEPHONES  
DCX150 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatible Bases  
This handset is compatible with Uniden's ꢀ.9 GHz DECT 6.0  
Expandable phone system: the DECTꢀ500, DECTꢁ000 and  
DECT3000 series.  
date list of compatible bases.  
Installing the Accessory Handset  
Checking the Package Contents  
Make sure your package contains the following items. If any  
items are missing or damaged, contact our Customer Service  
Hotline. See the back cover page for contact information.  
• Cordless Handset  
• Printed Material  
• Charging cradle with AC Adapter (model # PS-0007: Input  
ꢀꢁ0V AC, 60 Hz; Output 9V DC, ꢁꢀ0 mA)  
• Rechargeable Ni-Cd Battery Pack (model # BT-ꢀ0ꢀ5: Capacity  
650 mAh, ꢁ.4V)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Battery  
Use only the Uniden BT-ꢀ0ꢀ5 rechargeable battery pack  
supplied with your cordless telephone.  
Unpack all hand-  
sets, battery packs,  
and battery covers.  
(If the battery cover  
is on the handset,  
press in on the  
Line up the red and black  
wires on the battery pack  
connector with the sticker in  
the handset’s battery  
compartment.  
notch and slide the  
cover off.)  
RED  
BLACK  
Push the battery pack  
connector in firmly. (You  
should hear it click into  
place.) Gently tug on the  
battery wires to make sure  
the connection is secure.  
Place the cover over the  
battery compartment and  
slide it up into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Charging the Accessory Handset  
The handset is powered by a rechargeable battery pack that  
automatically recharges when the handset is placed in the  
charging cradle.  
Use only the Uniden PS-0007 AC adapter with the charging  
cradle.  
Connect the AC  
adapter to the DC IN  
9V jack as shown.  
(It may already be  
connected.)  
Connect the AC adapter to a  
standard 120V AC wall outlet.  
Place the handset in the  
charging cradle with the  
display facing forward.  
Make sure that the charge  
LED illuminates when the  
handset is seated.  
What if the charge LED  
doesn’t light up?  
Reseat the handset; make sure  
the contacts on the bottom of  
the handset are lined up with  
the contacts in the cradle.  
Check the AC adapter connection.  
Make sure you are not using an outlet  
that’s controlled by a wall switch.  
Charge your handset at least 15 to 20 hours  
before using it for the first time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Registering the Handset  
You must register the handset to the base before you can use it.  
Only one handset can be registered at a time. (If an accessory  
handset has ever been registered to a base, you must reset the  
handset before you can register it to a new base.)  
To register to a DECT 1500 series base with no corded  
handset:  
Place the accessory handset in the base. While the handset  
is registering, Handset Registering appears in the LCD. When  
Registration complete is displayed, the handset has been  
registered to the base.  
What if the  
display shows  
Registration  
failed?  
Charge the handset  
for 15-20 hours.  
Extra Handset  
Pick up the  
handset from  
the base and  
try again.  
Charging cradle  
Extra Handset  
Place the extra handset  
in the main base to  
register.  
Main Base  
ꢀꢀ4GIKUVTCVKQP  
ꢀꢀꢀ%QORNGVGꢁ  
ꢀꢀꢀꢀ$CUGꢀꢀꢂꢃ  
Extra Handset  
+
Main Base  
Charging cradle  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
To register to any other compatible base:  
ꢀ) If the other base has an LCD display:  
• With the phone in standby, press MENU/SELECT on the  
base. Press  
to move the cursor to Register Handset  
and then press MENU/SELECT. Handset Registering  
appears.  
If the other base does not have an LCD display:  
• Disconnect the base AC adapter. Then press and hold  
Find Handset key* while you reconnect the adapter. Keep  
pressing Find Handset key until the charge LED starts to  
blink.  
* This key might be labeled Find or Find HS.  
ꢁ) On the handset, press and hold # until the handset beeps  
and displays Handset Registering.  
3) When the handset finishes registering, it shows Registration  
complete in the display.  
What if the display shows Registration failed?  
Repeat the process starting with step 1.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Resetting the Handset  
If you want to register the handset to a different base or replace  
a handset with another one, you must first clear the registration  
information from the base and the handset.  
ꢀ) Press and hold END and # for at least five seconds, until the  
SYSTEM RESET menu appears.  
ꢁ) Select the Deregister HS  
ꢀ9JKEJꢀ*CPFUGV!  
submenu by pressing MENU/  
ꢀ*CPFUGVꢀꢀꢀꢀꢁꢂ  
SELECT. Which Handset?  
appears in the display.  
ꢀ*CPFUGVꢀꢀꢀꢀꢁꢃ  
3) Use  
or  
to select the  
handset ID to be de-registered from the list, and then press  
MENU/SELECT. Deregister HS appears.  
4) Press  
to move the cursor to Yes, and then press  
MENU/SELECT. You will hear a confirmation tone.  
Resetting the Handset Without the Base  
If the original base this handset was registered to is not  
available for some reason (for example, it is lost or somehow  
incapacitated), you can still reset the handset and use it with  
another base.  
ꢀ) Press and hold END and # for at least five seconds, until the  
SYSTEM RESET menu appears.  
ꢁ) Press  
to move the cursor to Base Unavailable and then  
press MENU/SELECT.  
3) Press  
to move the cursor to the base which you want  
to de-register from, and then press MENU/SELECT. Base  
Unavailable appears.  
4) Press  
to move the cursor to Yes, and then press  
MENU/SELECT. You hear a confirmation tone, and the  
handset deletes its own link to the base without trying to  
contact the base.  
Now you are ready to register the handset to the new base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Using the Interface  
Parts of the Handset  
new message LED  
Earpiece  
Display (LCD)  
key (up)  
CLEAR/INT'COM key  
(clear/intercom)  
MENU/SELECT key  
key  
key (phonebook/left)  
(caller ID/right)  
END key  
TALK/FLASH key  
key (down)  
key (speaker)  
Twelve-key dial pad  
/TONE key  
# key  
REDIAL/PAUSE key  
/MUTE key  
(messages/mute)  
Microphone  
Charging contacts  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Reading the Display  
In standby  
Time  
ꢀꢁ1((ꢀꢂꢃꢁꢄꢄ#  
ꢀꢀꢀ*CPFUGVꢀꢅꢂ  
ꢀꢀꢀ0GYꢀ%+&ꢁꢀꢆ  
Handset ID and banner  
Number of new  
Caller ID calls received  
During a call  
6CNMꢀꢀꢀꢀꢀ2ꢀꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢄꢁꢄꢄ  
ꢀꢀꢀ  
Call duration  
The ringer off icon indicates that the ringer is  
turned off.  
The voice mail icon appears when you have  
messages waiting in your voice mailbox.  
The privacy icon appears when the Privacy  
Mode is turned on.  
The speaker icon appears when the speaker  
phone is in use.  
The T-coil icon appears when the T-coil  
Mode is turned on.  
The mute icon appears while the microphone  
is muted.  
The battery icon indicates the handset  
battery status: full, medium, low, and empty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Using the Four-way Function Key  
Your handset has a four-way function key that allows you to  
move the cursor or pointer on the display and access the most  
commonly used features at the touch of a button.  
• Press the left side of the key to open the phonebook.  
• Press the right side of the key to open the Caller ID list.  
• Press the top of the key to increase the ringer volume (while  
the phone is  
in standby) or  
speaker volume  
(while you are on  
a call).  
• Press the bottom  
of the key to  
Increase the volume  
Open the  
Open the  
Caller ID list  
decrease the  
ringer volume  
(while the phone  
is in standby) or  
speaker volume  
(while you are on  
a call).  
phonebook  
Four-way  
Function Key  
Decrease the volume  
Using the Handset Menus  
To open the menu, press the MENU/SELECT key.  
• The arrow cursor on the left side of the line shows which  
menu item is currently highlighted. Use  
function key to move the cursor up and  
down.  
on the four-way  
to move the cursor  
To select the highlighted option, press MENU/SELECT.  
To go back to the previous screen, press left on the four-way  
function key.  
To exit the menu, press END.  
• If you don’t press any keys for thirty seconds, the phone will  
time out and exit the menu.  
Entering Text from Your Handset  
You can use the number keypad on your handset to enter text  
by referring to the letters printed on each number key. When you  
press the number key in a text entry field, the phone displays  
the first letter printed on the number key. Press the number key  
twice to display the second letter and three times to display the  
third.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ0  
• When [Aa] appears on the display, capital letters are displayed  
first, then lower case letters, and then the number on the key.  
• When [aA] appears on the display, lower case letters are  
displayed first, then the number on the key, and then capital  
letters.  
When you input the first letter or a letter after a blank space,  
the default mode is [Aa]. From the next letter, the mode  
changes to [aA] automatically.  
You can switch back and forth the mode manually between  
[Aa] and [aA]. Press /TONE; the case (small/capital) of the  
letter entered changes also.  
If two letters in a row use the same number key, enter the first  
letter, then use right on the four-way function key to move the  
cursor to the next position to enter the second letter.  
For example, to enter the word "Movies":  
Number of times key is pressed (when [Aa] appears on the display)  
ꢀ) Press 6  
once to  
1
enter M.  
2 ABC  
ꢁ) Use right  
3 DEF  
on the  
4 GHI  
four-way  
5 JKL  
function  
6 MNO  
key to  
7 PQRS  
8 TUV  
move the  
cursor to  
the right.  
9 WXYZ  
0 OPER  
3) Press 6  
three times  
to enter o.  
4) Press 8 three times to enter v.  
5) Press 4 three times to enter i.  
6) Press 3 two times to enter e.  
7) Press 7 four times to enter s.  
8) Press MENU/SELECT to end your text entry.  
If you make a mistake while entering a name, use right or left  
on the four-way function key to move the cursor to the incorrect  
character. Press CLEAR/INT’COM to erase the wrong character,  
and then enter the correct character. To delete all characters,  
press and hold CLEAR/INT’COM.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢀ  
Using Your Accessory Handset  
Making and Receiving Calls  
With the earpiece  
With the speaker phone  
ꢀ) Pick up the handset from the ꢀ) Pick up the handset  
cradle.  
ꢁ) Dial the number.  
3) Press TALK/FLASH.  
from the cradle.  
ꢁ) Dial the number.  
Make a  
call  
3) Press  
.
ꢀ) Pick up the handset.  
(If AutoTalk is on, the phone  
answers when you pick up the  
handset from the cradle.)  
ꢀ) Pick up the handset.  
ꢁ) Press  
Answer  
a call  
ꢁ) Press TALK/FLASH.  
(If Any Key Answer is on, you  
can press any key on the dial  
pad.)  
.
Hang up Press END or return the handset to the cradle.  
Adjusting the Volume  
Choose from four ringer volume settings (off, low, medium,  
and high). With the phone in standby, press or . The  
display shows the current volume level and the handset  
sounds the ringer at that level. Use to make the ringer  
volume louder or to make it softer or turn it completely off.  
Ringer  
Volume  
Choose from six volume levels for the earpiece. While on a  
Earpiece  
Volume  
call, press  
to make the earpiece volume louder or  
to  
make it softer.  
Choose from six volume levels for the handset speakerphone.  
Speaker  
Volume  
While on a speakerphone call, press  
volume louder or to make it softer.  
to make the speaker  
Notes: • If you set the ringer volume to Off, the handset won’t ring. The  
other stations will ring according to their individual settings.  
• The handset earpiece and the handset speaker have separate  
volume settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢁ  
Using Caller ID and Call Waiting  
If you subscribe to Caller ID, you can store up to thirty Caller  
ID numbers in each handset. Caller ID records are stored from  
newest to oldest. Once your Caller ID list is full and you receive  
an incoming call, the oldest record will be automatically deleted  
to make room for the new record.  
To open the Caller ID list, press . The phone will show the  
latest records. From the screen, you have the following options:  
Press  
to scroll through CID records. CID  
Scroll through the  
records  
records are stored chronologically from  
newest to oldest. (New records have an  
asterisk next to the received time.)  
ꢀ) Find the record you want to store and  
press MENU/SELECT.  
Store a record in the  
phonebook  
ꢁ) Move the cursor to Store into PB, and  
press MENU/SELECT.  
Find the entry you want to dial and press  
Dial a record  
TALK/FLASH or  
.
ꢀ) Find the entry you want to delete and press  
MENU/SELECT.  
Delete a record  
ꢁ) Move the cursor to Delete Entry, and press  
MENU/SELECT.  
ꢀ) Press MENU/SELECT.  
Delete all records  
ꢁ) Move the cursor to Delete All, and press  
MENU/SELECT.  
Press END, or press  
(the left key on the  
Exit the Caller ID list  
Using Call Waiting  
four-way function key) if you are on a call.  
If you subscribe to call waiting, a tone sounds if a call comes in  
when you are on the phone. If you subscribe to Caller ID on call  
waiting, the Caller ID information of the waiting call appears on  
the display. Press TALK/FLASH on the handset to accept the  
waiting call. After a short pause, you will hear the new caller. To  
return to the original caller, press TALK/FLASH on the handset  
again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ3  
Using the Phonebook  
You can store up to seventy entries in the handset’s phonebook.  
If the phonebook is full and you try to add a new entry, you will  
hear a beep and see Memory Full in the display. Delete some of  
the existing entries before trying to add new ones.  
Press  
to enter the phonebook. Once in the phonebook, you  
have the following options:  
Press  
alphabetically.  
to scroll through the phonebook  
Scroll through  
the entries  
Jump to  
entries that  
start with a  
certain letter  
Press the number key corresponding to the letter you  
want to jump to.  
ꢀ) Press MENU/SELECT.  
Store a new  
entry  
ꢁ) Move the cursor to Create New, and then press  
MENU/SELECT.  
ꢀ) Find the entry you want to copy, and press  
MENU/SELECT.  
Copy one  
entry to  
another  
station  
ꢁ) Move the cursor to Copy, and press  
MENU/SELECT  
.
3) Move the cursor to select the station you want to  
copy the entry to, and press MENU/SELECT.  
Copy all  
entries to  
another  
station at  
once  
ꢀ) Press MENU/SELECT, and then select Copy All.  
ꢁ) Move the cursor to select the station you want to  
copy the entries to, and press MENU/SELECT.  
3) Move the cursor to Yes, and press MENU/SELECT.  
ꢀ) Find the entry you want to dial.  
Dial an entry  
ꢁ) Press TALK/FLASH or  
.
ꢀ) Find the entry you want to delete, and press  
Delete an  
entry  
MENU/SELECT.  
ꢁ) Move the cursor to Delete, and press MENU/SELECT  
.
ꢀ) Press MENU/SELECT.  
Delete all  
entries  
ꢁ) Move the cursor to Delete All, and press  
MENU/SELECT.  
Close the  
phonebook  
Press END, or press  
again if you are on a call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ4  
Redialing a Number  
To redial one of the last five numbers dialed on this handset,  
press REDIAL/PAUSE. This opens the redial list. Use  
to find the number you want to dial, and press TALK/FLASH or  
in standby, or press MENU/SELECT during a call.  
and  
Muting the Ringer (One Call Only)  
While the handset is ringing, press  
/MUTE or END to mute  
the ringer for this call. The phone will ring again on the next call.  
(The handset must be off the cradle to mute the ringer.)  
Muting the Microphone  
To mute the microphone so the caller can't hear you, press  
/MUTE during a call. Mute On and appear in the display.  
Press  
/MUTE again to cancel muting.  
Privacy Mode  
To prevent other stations from interrupting a call, press  
MENU/SELECT during a call. Move the cursor to Call Privacy,  
and then press MENU/SELECT. Privacy Mode On and appear  
in the display. Repeat the procedure to turn off privacy mode.  
Adjusting the Audio Tone  
If you aren't satisfied with your phone's audio quality, you can  
adjust the Audio Tone of the earpiece. While on a call, press  
MENU/SELECT. Move the cursor to select Audio Tone, and  
then press MENU/SELECT. Move the cursor to select desired  
audio tone options: High Tone, Natural Tone, or Low Tone. (The  
default setting, Natural Tone, is recommended for hearing aid  
users.) Press MENU/SELECT to confirm. After two seconds, the  
displayed audio tone is set, and the display returns to normal.  
Audio tone adjustments only apply to the earpiece, not the  
speakerphone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ5  
Using Hold, Conference, Transfer and Intercom  
Press CLEAR/INT’COM. If you leave a caller on  
hold for more than five minutes, the call will be  
Put a call on hold  
disconnected. To return to the party on hold, press  
TALK/FLASH or  
.
To join a call already in progress, press  
Join a call already  
in progress  
TALK/FLASH or  
. You can hang up normally;  
the other station remains connected to the call.  
Press CLEAR/INT’COM; the call is placed on  
hold. Use  
or  
to select the station you want  
to transfer the call to, and press MENU/SELECT.  
(To page all stations at once, select All.) When the  
other station answers, you can talk to the station;  
the outside call remains on hold. If the other  
Transfer a call  
station accepts the call, you will be disconnected.  
To cancel the transfer and return to the call,  
Cancel a transfer  
press TALK/FLASH or  
.
To answer the transfer page and speak to the  
transferring station, press TALK/FLASH or  
CLEAR/INT’COM. To accept the call and speak to  
the caller, press TALK/FLASH again.  
Accept a  
transferred call  
With the phone in standby, press  
CLEAR/INT’COM.Use  
or  
to select the  
Make an intercom  
page  
station you want to talk with, and then press  
MENU/SELECT. (If you select All, all other  
stations will be paged.)  
Cancel a page  
To cancel the intercom page, press END.  
Answer an  
intercom page  
Press TALK/FLASH or CLEAR/INT’COM.  
Note: When answering a transferred call or an intercom page, if  
AutoTalk is on, the handset will automatically answer the page  
when you pick up the handset from the cradle. If Any Key  
Answer is on, you can also press any key on the handset’s dial  
pad.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ6  
Accessing Your Answering System  
If your base has an answering system, you can use your handset  
to get your messages and change your answering system setup.  
The answering system plays your new messages (that you  
have not listened to yet) first. If you have no new messages, the  
system plays your old messages.  
You have the following options:  
Press  
/MUTE. The system announces the number of  
Playing  
new  
messages  
new and old messages, then plays the first new message  
followed by the day and time it was received. Then the  
system plays the new messages in the order they were  
received.  
Press 1 once to go to the beginning of the current  
Repeating  
a message  
message.  
Press 1 repeatedly to go back to a previous message.  
Skipping a  
message  
Press 3 to go to the beginning of the next message.  
Deleting a While a message is playing, press 4.  
message The message is permanently deleted.  
After you listen to your new messages, press  
again to play your old messages.  
/MUTE  
Playing old  
messages  
Press 5 to stop the message playback.  
Press END to exit the system and return to standby,  
or press 2 to restart the message playback.  
Exiting the  
message  
review  
Screening Calls  
If your base has an answering system, you can listen to callers  
as they leave a message. Press  
/MUTE when the system is  
answering to listen to the caller without answering the phone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ7  
Accessing Voicemail  
If your base doesn't have an answering system and you  
subscribe to a voice mail service, you can program your handset  
to automatically dial the access number.  
ꢀ) Press MENU/SELECT.  
ꢁ) Move the cursor to Handset Setup and press  
MENU/SELECT.  
3) Move the cursor to Edit Voice Mail and press  
MENU/SELECT.  
4) Enter your access number (up to twenty digits). If you need  
the phone to wait before sending the next digits, press  
REDIAL/PAUSE to insert a two-second pause. For a longer  
pause, press REDIAL/PAUSE multiple times. Each pause  
counts as one digit.  
5) Press MENU/SELECT when you are finished.  
Once you program your access number, press  
your voice mail service.  
/MUTE to dial  
Maintenance  
Battery Life  
With average use, your battery provides more than ten hours  
of talk time and approximately seven days of standby time.  
For optimum performance, be sure to return the handset to the  
cradle after each call. If the handset is left off of the cradle, the  
actual talk time duration will be reduced respective to the amount  
of time the handset is off the cradle.  
Note: Do not place the power cord where it creates a trip hazard or  
where it could become chafed and create a fire or electrical  
hazard.  
Low Battery Alert  
When the battery pack is very low, the display shows Low  
Battery - Charge Handset and the empty battery icon. If the  
phone is in standby, none of the keys will operate. If you are on  
a call, complete your conversation as quickly as possible, and  
return the handset to the cradle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ8  
Battery Replacement and Handling  
With normal usage, your battery should last about one year.  
If the talk time becomes short even after the battery is recharged,  
please replace the battery. You can purchase a replacement  
battery by calling Uniden's Parts department. See the back cover  
page for contact information.  
Warning:  
To avoid the risk of personal injury or property damage from fire or  
electrical shock, use only the BT-1015 battery pack.  
Caution:  
- This equipment contains a rechargeable Nickel-Metal-Hydride  
battery.  
- Do not remove the batteries to charge them.  
- Never throw the battery in a fire or disassemble or heat it.  
- Do not remove or damage the battery casing.  
- Nickel is a chemical known to state of California to cause cancer.  
- Do not short-circuit the battery.  
- Do not charge the battery used in this equipment in any charger  
other than the one designed to charge this battery as specified in  
the owner's manual. Using another charger may damage the  
battery or cause the battery to explode.  
- Rechargeable batteries must be recycled or disposed of properly.  
Clean the Battery Contacts  
To maintain a good charge, clean  
the charging contacts on the  
handset once a month. Dampen  
a cloth with plain water. Gently  
rub the damp cloth over the  
charging contacts until all visible  
Contacts  
dirt is removed.  
Dry the contacts thoroughly  
before returning the handset to the cradle.  
Caution:  
Do not use any chemical products (alcohol, paint thinner, etc.), or  
you may discolor the surface and damage the finish.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ9  
The FCC Wants You To Know  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as detailed by  
the owner's manual, could void your authority to operate this product.  
This device complies with part ꢀ5 of the FCC rules. Operation is subject  
to the following two conditions: (ꢀ) This device may not cause harmful  
interference, and (ꢁ) This device must accept any interference received,  
including interference that may cause undesired operation. Privacy of  
communications may not be ensured when using this phone.  
To insure the safety of users, the FCC has established criteria for  
the amount of radio frequency energy various products may produce  
depending on their intended usage. This product has been tested  
and found to comply with the FCC's exposure criteria. For body worn  
operation, the FCC RF exposure guidelines were also met when used  
with the Uniden accessories supplied or designed for this product. Use  
of other accessories may not ensure compliance with FCC RF exposure  
guidelines and should be avoided.  
I.C. Notice  
Terminal Equipment  
NOTICE:This equipment meets the applicable Industry Canada Terminal  
Equipment Technical Specifications. This is confirmed by the registration  
number. The abbreviation, IC, before the registration number signifies  
that registration was performed based on a Declaration of Conformity  
indicating that Industry Canada technical specifications were met. It does  
not imply that Industry Canada approved the equipment.  
NOTICE:The Ringer Equivalence Number (REN) for this terminal  
equipment is marked on the equipment itself. The REN assigned to  
each terminal equipment provides an indication of the maximum number  
of terminals allowed to be connected to a telephone interface. The  
termination on an interface may consist of any combination of devices  
subject only to the requirement that the sum of the Ringer Equivalence  
Numbers of all the devices does not exceed five.  
Radio Equipment  
The term "IC:" before the radio certification number only signifies  
that Industry Canada technical specifications were met. Operation is  
subject to the following two conditions: (ꢀ) this device may not cause  
interference, and (ꢁ) this device must accept any interference, including  
interference that may cause undesired operation of the device. "Privacy  
of communications may not be ensured when using this telephone".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁ0  
One Year Limited Warranty  
Important: Evidence of original purchase is required for warranty  
service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the  
original retail owner, this Uniden Product to be free from defects in  
materials and craftsmanship with only the limitations or exclusions set  
out below.  
WARRANTY DURATION: This warranty to the original user shall  
terminate and be of no further effect ꢀꢁ months after the date of original  
retail sale. The warranty is invalid if the Product is (A) damaged or not  
maintained as reasonable or necessary, (B) modified, altered, or used  
as part of any conversion kits, subassemblies, or any configurations  
not sold by Uniden, (C) improperly installed, (D) serviced or repaired by  
someone other than an authorized Uniden service center for a defect  
or malfunction covered by this warranty, (E) used in any conjunction  
with equipment or parts or as part of any system not manufactured by  
Uniden, or (F) installed or programmed by anyone other than as detailed  
by the owner's manual for this product.  
STATEMENT OF REMEDY: In the event that the product does not  
conform to this warranty at any time while this warranty is in effect,  
warrantor will either, at its option, repair or replace the defective unit and  
return it to you without charge for parts, service, or any other cost (except  
shipping and handling) incurred by warrantor or its representatives  
in connection with the performance of this warranty. Warrantor, at  
its option, may replace the unit with a new or refurbished unit. THE  
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE  
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF  
AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE  
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY  
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER  
OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not  
allow this exclusion or limitation of incidental or consequential damages  
so the above limitation or exclusion may not apply to you.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢀ  
LEGAL REMEDIES: This warranty gives you specific legal rights, and  
you may also have other rights which vary from state to state. This  
warranty is void outside the United States of America and Canada.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:  
If, after following the instructions in the owner's manual you are certain  
that the Product is defective, pack the Product carefully (preferably in  
its original packaging). Disconnect the battery from the Product and  
separately secure the battery in its own separate packaging within the  
shipping carton. The Product should include all parts and accessories  
originally packaged with the Product. Include evidence of original  
purchase and a note describing the defect that has caused you to return  
it. The Product should be shipped freight prepaid, by traceable means,  
to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76ꢀ55  
May be covered under one or more of the following U.S. patents:  
5,49ꢀ,745  
5,660,ꢁ69  
5,754,407  
5,80ꢀ,466  
5,9ꢀ5,ꢁꢁ7  
6,044,ꢁ8ꢀ  
6,3ꢀ4,ꢁ78  
6,78ꢁ,098  
6,90ꢀ,ꢁ7ꢀ  
7,0ꢁ3,ꢀ76  
7,3ꢀ0,398  
5,533,0ꢀ0  
5,663,98ꢀ  
5,758,ꢁ89  
5,8ꢁ5,ꢀ6ꢀ  
5,9ꢁ9,598  
6,070,08ꢁ  
6,3ꢁꢀ,068  
6,788,9ꢁ0  
6,907,094  
7,030,8ꢀ9  
5,574,7ꢁ7  
5,67ꢀ,ꢁ48  
5,768,345  
5,864,6ꢀ9  
5,930,7ꢁ0  
6,076,05ꢁ  
6,4ꢀ8,ꢁ09  
6,788,953  
6,9ꢀ4,940  
7,ꢀ46,ꢀ60  
5,58ꢀ,598  
5,7ꢀ7,3ꢀꢁ  
5,787,356  
5,893,034  
5,960,358  
6,ꢀꢁ5,ꢁ77  
6,6ꢀ8,0ꢀ5  
6,839,550  
6,940,867  
7,ꢁ03,307  
5,650,790  
5,73ꢁ,355  
5,794,ꢀ5ꢁ  
5,9ꢀꢁ,968  
5,987,330  
6,ꢁ53,088  
6,7ꢀ4,630  
6,889,ꢀ84  
6,953,ꢀꢀ8  
7,ꢁ06,403  
Other patents pending.  
As an Energy Star® Partner, Uniden has  
determined that this product or product models  
meets the Energy Star® guidelines for energy  
efficiency. Energy Star® is a U.S. registered mark.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢁꢁ  
VISIT OUR WEBSITE AT  
WWW.UNIDEN.COM IF YOU  
Have A Question Or A Problem.  
Or call our Customer Hotline at 1-800-297-1023  
during regular business hours.*  
Are Looking For A Part Or Accessory.  
Or call our Parts Department at 1-800-554-3988  
during regular business hours.*  
Need Special Assistance Due To A Disability.  
Or call our Accessibility help line at 1-800-874-9314  
(voice or TTY).  
© 2008 Uniden America Corp.,  
Fort Worth, Texas. Printed in China.  
* Central Standard Time.  
Detailed customer service hours  
UUZZ01683BZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Thermador Cooktop SGC456 User Manual
Trane Thermostat 371 User Manual
Trango Broadband Stereo System AD2401 24 User Manual
Tripp Lite Network Cables N201 010 WH User Manual
Universal Electronics Universal Remote DVR PVR 5 Device User Manual
UTStarcom Cell Phone VM8915 User Manual
ViewSonic MP3 Player PJ256D User Manual
Viking Gas Grill VGBQ300 User Manual
Vizio Network Card NX 100 User Manual
VTech Cordless Telephone LS6205 User Manual