Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
WELCOME/FEATURES
3
5
6
8
9
Editing or Erasing a Stored Name,
Phone Number, Distinctive Ring, and Speed Dial
Chain Dialing
43
44
45
46
47
48
49
50
51
51
58
61
64
64
65
65
66
67
68
69
69
69
69
70
70
71
72
74
75
77
78
79
QUICK REFERENCE GUIDE
CONTROLS AND FUNCTIONS
DISPLAY AND ICONS
ABOUT SOFT KEY FUNCTION/TERMINOLOGY
GETTING STARTED
Read this First
Checking the Package Contents
Setting up the Phone
Mounting the Base Unit on a Wall
DCT5280 Flow Chart
About the Menu
Setting up the Menu
CALLER ID
Viewing the Caller ID List
Deleting Information from the Caller ID List
Using the Caller ID Message List
Call Waiting Deluxe Features
10
10
11
12
16
18
20
23
31
31
32
33
34
34
34
35
35
35
36
36
37
37
THE INTEGRATED ANSWERING DEVICE
Turning the Answering System On/Off
Setting up your Answering System
Using your Answering System
Remote Operation
EXPANDING YOUR PHONE
Connecting the Charger
Register the Handset
BASICS
Making and Receiving Calls
Placing a Call on Hold
Redialing a Call
Using the DirectLink Mode
4-Way Conferencing
Ringer Mute (temporarily)
Adjusting the Earpiece and Handset Speaker Volume
Mute Microphone
Intercom/Call Transfer Feature
Replacing the Base
ADDITIONAL INFORMATION
Changing the Digital Security Code
Installing the Beltclip
Headset Installation
Note on Power Sources
Maintenance
General Information
Tone Dialing Switch-over
Traveling Out-of-Range
Clarity Booster
3-way Conferencing
Intercom/Call Transfer Feature
Flash and Call Waiting
New Message LED
TROUBLESHOOTING
Liquid Damage
PHONEBOOK
38
Storing Phone Numbers, Names,
Distinctive Rings, and Speed Dial
Steps for Entering Names and Special Characters
Viewing the Phonebook
PRECAUTIONS & WARRANTY
I.C. NOTICE
INDEX
38
40
42
43
43
Making Calls Using the Phonebook
Speed Dialing
REMOTE OPERATION CARD
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 2 ]
Congratulations on your purchase of the Uniden DCT5280 series Multi Handset Cordless System
telephone. This unit is different from conventional cordless telephones. When the base unit is
connected to AC power and a telephone line, it can support up to 4 handsets. Using extra
handsets, you can establish a 4-way conference call (2 H/S- Base Speaker Phone-an outside line,
or 3 handsets- an outside line). Additionally, with 4-way conference using 2 handsets, another 2
handsets can establish an intercom call. You can now place a fully featured cordless handset
anywhere in your home or office where AC power is available to connect the handset chargers.
Welcome
Features
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
As an Energy Star® Partner, Uniden has determined that this product or product models
meets the Energy Star® guidelines for energy efficiency.
Energy Star® is a U.S. registered mark.
Note: Energy Star® applies to DCT5280 only.
• 2.4GHz Frequency Hopping Spread Spectrum
• Integrated Answering Device (Trilingual Announcement Option)
• 4 Multi-Handset Expandability
• Hands Free Speakerphone in the Handset
• Call Waiting Deluxe
• Caller ID/Caller ID on Call Waiting
• 100 Dynamic Memory Location (Phonebook & Caller ID)
• Trilingual Function Menus (English-French-Spanish) (Handset)
• Intercom/Call Transfer
• 16 Distinctive Ring Options (8 ringer tones and 8 melody ringers)
• Mute Feature
• Flash and Pause
• 88 Channel Auto Scan
• DirectLinkTM Mode
• Battery Level Indicator
• Clock Display
Download from Www.Somanuals.com. All Manuals Search And Download.
W E LC O M E / FE ATU R E S
[ 3 ]
The DCT5280 series features include AutoTalk™ and AutoStandby™. AutoTalk allows you to answer a call by just
removing the handset from the cradle so you don’t have to waste time pushing buttons. AutoStandby allows you to
hang up by simply returning the handset to the cradle.
To protect you against mis-billed calls, which might result from your phone being activated by other equipment, the
DCT5280 series has Random Code™ digital security, which automatically selects one of over approx. 130,000 digital
security codes for the handset and base.
Frequency Hopping Spread Spectrum (FHSS) technology improves calling range and clarity, and eliminates cross talk.
Because it rapidly changes transmission frequencies within the 2.4GHz bandwidth, this cordless phone helps reduce
the possibility of eavesdropping.
DirectLink™ Mode is used when you have 2 or more handsets. You can use your handsets as transceivers.
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, DirectLink, and Random Code are trademarks of Uniden America Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
W E LC O M E / FE ATU R E S
[ 4 ]
Step 1 Charging the Batteries
Step 2 Connecting
Step 3 Using the Phone
Step 4 Setting up
Answering System
INSTALL THE AA BATTERIES
CONNECT TO A PHONE LINE
TO SELECT CALLER ID OPTIONS
When the handset batteries are fully
charged, plug the telephone cord into
the base unit and then into a telephone
wall jack.
Remove the cover.
SUN 12:00A
Handset #1
New: 5
MENU
CID RDL PB
Install the batteries,
observing the
correct polarity.
Press the MENU soft key in the
standby mode.
Press volume/ L or M to select
“Global Setup”, then the
OK soft key.
Replace the cover.
Press volume/ L or M to select
Your phone is set for tone dialing. If your
local network requires pulse dialing, please
see “Setting the Dial Mode” on page 30.
“CIDCW”, then the OK soft key.
Press volume/ L or M to select
“CW On/CWDX On”,
“CW On/CWDX Off”, or
“CW Off/CWDX Off”,
then the OK soft key.
TO TURN THE ANSWERING
SYSTEM ON/OFF
PLUG INTO AC POWER
Plug the AC adapter cord into
the base unit and then to a
120V AC outlet.
Each time
answering mode is switched between
On and Off.
ans on is pressed, the
TO CHOOSE THE LANGUAGE
TO SET GREETING MESSAGE
Press the MENU soft key in the
standby mode.
Press and hold greeting.
Press volume/ L or M to select
“Handset Setup”, then the
OK soft key.
Start recording your message.
Position yourself as near to
the base as possible.
Press volume/ L or M to select
“Language”, then the OK
soft key.
When finished, press greeting
or
.
Place the handset in the base.
Press volume/ L or M to choose
a Language, then the OK soft key.
You must charge the batteries
Note: continuously for 17-20 hours
before using the phone.
Q U I C K R E FE R E N C E G U I D E
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 5 ]
Controls and Functions
1. Handset Antenna
2. Headset Jack Cover
3. Beltclip Hole
1
4. Hands Free Speaker
5. Handset Battery Compartment
6. New Message LED
7. Handset Earpiece
8. LCD Display
6
7
2
3
4
8
9. Talk/flash Key
12
13
10.
/tone/t Key
11. Speaker Key
12. Soft keys
13. Volume/L (up) Key
14. End Key
9
14
15
5
16
17
18
15. Volume/M (down) Key
16. #/s Key
17. Intercom/hold Key
18. Handset Microphone
19. Handset Charging Contacts
10
11
19
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N TR O LS A N D FU N C TI O N S
[ 6 ]
20 21 22 23
24
25 26
33
34
27
35
36
28
29
41 42
30
(DCT5280-2 only)
45
31
32
37
38
39
43
44
40
20. Base Speaker
21.
22.
(repeat)/SELECT Key
30. Intercom Key
31. Mute Key
32. Base Charging Contacts
33. Base Antenna
38. Ringer/vol (volume) L (up) Key
39. Ringer/vol (volume) M (down) Key
40. Microphone
41. Telephone Input
42. DC Power Input
del (delete) Key
23. CLOCK/MENU Key
24. Message Counter Display
25. SET Key
34.
(skip)/SELECT Key
26.
ans (answer) on Key
35. In use LED
43. Charging Contacts (DCT5280-2 only)
44. Charge LED (DCT5280-2 only)
(talk) Key/speaker LED 45. DC Power Input (DCT5280-2 only)
27. Charge LED
28. Greeting Key
29. Memo rec (record) Key
36.
37.
(play/stop) Key
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N TR O LS A N D FU N C TI O N S
[ 7 ]
Display and Icons
Example of the standby mode display
Ringer off icon (when the ringer is Off) / day of the week and time
(hh:mm/A/P) / battery icon
SUN 12:00A
Handset #1
New: 5
Handset ID and Banner
Number of new Caller ID calls received
Soft keys
MENU
CID RDL PB
(These will not be displayed while the handset is charging in the cradle.)
ICON
STATUS
DESCRIPTION
Battery icons indicate the handset battery status. This icon cycles
depending on the battery status (empty, low, medium, and full).
indicates that the batteries installed are not for use with this
phone, remove the batteries immediately.
Standby/Talk
Standby
Standby
Talk
Ringer off icon indicates that ringer is set to Off.
Handset Remote soft key is used to play an incoming message remotely.
Mute icon appears when you mute the handset.
Talk
Talk
Speaker icon appears when the handset speaker phone is used.
Recording icon appears while recording a conversation.
Download from Www.Somanuals.com. All Manuals Search And Download.
D I S P LAY A N D I C O N S
[ 8 ]
About Soft Key Function
In the standby mode
In the talk mode
Talk 999:59
SUN 12:00A
Handset #1
New: 5
1234567890
MENU
CID RDL PB
MUTE
MENU
CWDX
Soft key 1
Soft key 2
Soft key 3
Soft key 1
Soft key 2
Soft key 3
Soft key functions consists of soft key icons and soft keys (No. 1, 2, and 3). Each soft key corresponds to the
icon displayed above, and each icon will be changed depending on the operation. Press the corresponding soft
key to enter a menu, or select an item. In this manual, we refer to this combination of icons and keys as the
soft key.
For example, you will use the soft keys when you want to:
- Access the main menu
- Set up CIDCW options
- Access Caller ID messages stored
- Store or edit phone numbers
- Redial one of the last three numbers dialed from the handset
- Etc….
Note: The soft keys will not appear while charging the handset.
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.
Standby Mode - The handset is not in use, is off the cradle, and talk/flash or speaker has not been pressed.
A dial tone is not present.
Talk Mode - The handset is not in the cradle and talk/flash or speaker has been pressed enabling a dial tone.
“Talk” appears on the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
A B O U T S O FT K E Y FU N C TI O N / TE R M I N O LO G Y
[ 9 ]
Read this First
This cordless telephone must be set up before use. Follow these steps:
Step 1 (page 11)
Unpack the telephone and accessories.
Step 2 (page 12)
Next, choose the best location to set up the
base unit.
Step 3 (page 13 to 17)
Then, insert the batteries into the handset.
Connect the base unit. You must charge the
batteries for 17-20 hours before plugging
into the phone line and using the phone.
Then set the dial mode.
About the digital security code
This cordless telephone uses a digital
security code to prevent unauthorized
access to your base unit. This security
code prevents other cordless handsets
from making calls through your base
unit. If you want to change the
Step 4 (page 18 to 30)
Finally, set the menu. You can set, for example:
clock, CIDCW setting, area code, TAD menu, and
Autotalk from the menu.
security code, see page 69.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 10 ] G E TTI N G S TA R TE D
Checking the Package Contents
Make sure you have received the following items in the package. If any of these
items are missing or damaged, contact the Uniden Parts Department.
• Base unit (1)
• Handset [DCT5280 (1) / DCT5280-2 (2)*]
• AC adapter [DCT5280 (1) / DCT5280-2 (2)]
• Desk top / Wall Mount adapter (1)
• Rechargeable batteries [DCT5280 (2) / DCT5280-2 (4)]
• Long telephone cord (1)
• Short telephone cord (1)
• Beltclip [DCT5280 (1) / DCT5280-2 (2)]
• Charger (1) [DCT5280-2 only]
Also included:
• This Owner’s Manual
• Other Printed Material
* For operations and restrictions on using multi handsets, read “Expanding Your
Phone” on page 64.
Uniden Parts Department
(800) 554-3988
Hours: M-F 8:00 a.m. to 5:00 p.m. CST.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 11 ]
Setting up the Phone
Do the following steps:
A. Choose the best location
C. Connect the base unit
D. Choose the dialing mode
B. Install the AA batteries into the handset
If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
A. Choose the best location
Before choosing a location for your new phone, read “Installation Considerations” on
page 76. Here are some important guidelines you should consider:
If you have questions
about what will disable
alarm equipment, contact
your telephone company
or a qualified installer.
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a window
by a street with heavy traffic
Avoid microwave ovens
Avoid television sets and
other electronic equipment
Avoid excessive
moisture, extremely
low temperatures,
dust, mechanical
vibration, or shock
Avoid personal computers
Choose a central location
Avoid other cordless telephones
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 12 ] G E TTI N G S TA R TE D
B. Install the AA batteries into the handset
Charge the batteries for at least 17-20 hours before
plugging the phone line into your base unit.
1) Press down on the battery cover release and slide the cover
down until it comes off.
• Use only “AA”
rechargeable Ni-MH
batteries. Do Not use
Alkaline, Lithium, or
non-rechargeable
2) Install the batteries supplied with your phone, observing
correct + - polarity.
batteries. To insure
maximum performance
and safety, use
3) Securely close the battery compartment cover by sliding
it up until it snaps into place.
replacement batteries
specifically matched
for this phone, contact
The DCT5280 series will only work with “AA” Ni-MH
rechargeable batteries. If you use any other type of batteries,
the display will show “Use rechargeable battery only”.
Using incorrect
batteries could damage
or limit the
performance and could
cause bodily injury.
Battery use time (per charge)
Fully charged (17-20 hours charge time)
• Up to 7 hours continuous use
• Recharge your phone
on a regular basis by
returning the handset
to the cradle after
each phone call.
• Up to 14 days when the handset is in the standby mode
Low battery alert
When the batteries are very low and need to be charged, the phone is programmed to
eliminate functions in order to save power.
The batteries need to be charged when:
- The battery icon appears.
- “Low Battery” appears in the display.
Low Battery
If the phone is in the standby mode, none of the keys will operate. If you are on a call,
complete your conversation as quickly as possible, and return the handset to the cradle.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 13 ]
Cleaning the battery charging contacts
To maintain a good charge, it is important to
clean the charging contacts on both the
handset and the base unit once a month.
Use a dry cloth or pencil eraser to clean.
If the contacts become very dirty, using water
only, dampen a cloth to clean the charging
contacts. Then make sure to go back over the
charging contacts with a dry cloth before
returning the handset to the base to charge.
contacts
C. Connect the base unit
1) Install the desk top/wall mount adapter into
the notches on the base top.
2) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 14 ] G E TTI N G S TA R TE D
3) Set the base on a desk or tabletop, and place the handset in the base unit as shown.
4) Make sure the charge LED illuminates. If the LED does
not illuminate, check to see that the AC adapter is
plugged in and that the handset makes good contact
with the base charging contacts.
• Use only the supplied AD-830 AC adapter.
Do not use any other AC adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you
can unplug the AC adapter easily.
• While charging, all handset keys will be disabled.
• After installing the batteries in the handset, charge your handset at least 17-20
hours before plugging into the phone line.
Place the power cord
so that it does not
create a trip hazard
or where it could
become chafed and
create a fire or
5) Once the handset batteries are fully charged,
connect the telephone line cord to the
TEL LINE jack and to a telephone outlet.
If your telephone outlet isn't modular
type, contact your telephone company
electrical hazard.
for assistance.
Modular
D. Choose the dialing mode
Most phone systems use tone dialing, which sends DTMF tones through the phone lines.
However some phone systems still use pulse dialing such as in rural areas. The default
setting is tone dialing. Depending on your dialing system, set the dial mode. To set the
dial mode, see “Setting the Dial Mode” on page 30.
• If you are not sure of your dialing system, set the unit to tone dialing. Make a trial call.
If the call connects, leave the setting as is, otherwise set the unit to pulse dialing.
• If your phone system requires pulse dialing and you need to send DTMF tones in certain
situations during a call, you may “switch-over” to tone dialing. (Refer to “Tone Dialing
Switch-over” on page 35.)
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 15 ]
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1) Snap the desk top/wall mount adapter into the notches on the base bottom.
Do not use an
outlet controlled
by a wall switch.
2) Plug the AC adapter to the DC IN 9V jack. Route the AC
adapter cord inside the molded wiring channel as shown.
3) Plug the AC adapter into a standard 120V AC wall outlet.
4) Plug the telephone line cord into the TEL LINE jack.
Route the cord inside the molded wiring channel as shown.
5) Plug the telephone line cord into the
telephone outlet.
6) Raise the antenna to a vertical position.
7) Align the mounting slots on the base with the
mounting posts on the wall. Push in and down
until the base is firmly seated.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 16 ] G E TTI N G S TA R TE D
Direct wall plate mounting
If you don’t have a standard wall plate, you can mount your base directly
to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location
that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 10 - 15 feet of a working phone jack to
avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the
base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall, (with
their appropriate anchoring device), 3-15/16
inches apart. Allow about 1/8 of an inch
between the wall and screwheads for mounting
the base.
2) Refer to steps 1 through 7 on page 16 to mount
the base.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 17 ]
DCT5280 Flow Chart
• From the standby mode
M
E
N
U
Caller ID
DirectLink Mode
Handset Setup
Answ. Setup
SUN 12:00A
Handset #1
New: 5
M
M
L
or
M
CID
RDL
PB
DirectLink Mode
Handset Setup
Answ. Setup
Redial History
Phonebook
BACK
BACK
OK
BACK
OK
MENU
CID RDL PB
BACK
OK
Select a menu,
then press the
OK soft key.
OK soft key
OK soft key
Play incoming
messages remotely
(see page 63).
<HANDSET SETUP>
Ringer Volume
Ringer Tones
Distinct. Ring
Auto Talk
Anykey Answer
Banner
Language
To enter
L
or
M
DirectLink mode
press [ENTER]
Setup the menu:
BACK
BACK
ENTER
• See page 45 for Caller ID.
• See page 33 for Redial.
• See page 38 for Phonebook.
ENTER soft key
SUN 12:00A
Contrast
Handset #1
DirectLink Mode
BACK
OK
CANCEL
DirectLink
OK soft key
Setup the menu
(see pages 24-26).
DirectLink soft key
Go to DirectLink operation
(see pages 24, 65).
SUN 12:00A
Handset #1
DirectLink Mode
CANCEL
DirectLink
Press the CANCEL soft key,
then the OK soft key.
Normal standby mode
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 18 ] G E TTI N G S TA R TE D
• From the Talk mode
DirectLink Mode
Handset Setup
Answ. Setup
Handset Setup
Answ. Setup
Global Setup
Answ. Setup
Global Setup
System Reset
BACK OK
Talk
1234567890
999:59
M
M
M
BACK
OK
BACK
OK
MUTE
MENU
CWDX
• Press the MUTE soft key
to mute a call.
OK soft key
OK soft key
OK soft key
<GLOBAL SETUP>
Day & Time
CIDCW
<ANSW. SETUP>
Security Code
Ring Time
Record Time
Message Alert
Language
<SYSTEM RESET>
Deregister HS
Replacing Base
• Press the MENU soft key,
then select:
L
L
or
M
L
or
M
or
M
- “Booster On” to improve
the sound quality
Area Code
Dial Mode
BACK
BACK
OK
(see page 35).
BACK
OK
OK soft key
- “Recording” to record the
conversation (see page 60).
- “Caller ID” to view Caller
ID list (see page 46).
- “Phonebook” to view
phonebook locations
Call Screen
Answer Mode
OK soft key
Setup the menu
(see page 30).
BACK
OK
Setup the menu
(see pages 29-30).
OK soft key
(see page 42).
Setup the menu
(see pages 27-28).
- “Redial History” to
view the last three number
dialed (see page 33).
• Press the CWDX soft key
to access the Call Waiting
Deluxe Features
(see page 49).
The CWDX soft key
appears only when the
Caller ID setup is set to
“CW On/CWDX On”.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 19 ]
About the Menu
Most of the handset settings are set from the menu. The menu has 5 main menus
(DirectLink Mode, Handset Setup, Answ. Setup, Global Setup, and System Reset)
and submenus respectively.
For Answ. Setup,
Global Setup and
System Reset
Summary of the Main Menu and Submenu
DirectLink Mode
Select this menu to enter the handset into DirectLink mode. If you have 2 or more
handsets, a pair of handsets work as transceivers. Use them at sporting events to stay
in contact with family and friends, or at a shopping mall. To use this feature, you
must set the two handsets to the DirectLink mode first (see page 24).
(Deregister HS)
menu, make sure the
line is not in use,
and the handsets are
within the range
limits of the base.
This menu only applies when you have 2 or more handsets.
Handset Setup
All settings must be set separately for each handset in the Handset Setup menu.
Submenu name
Ringer Volume
Ringer Tones
Description
Adjust the ringer volume (see page 24).
Adjusting the ringer tone (see page 25).
Distinct. Ring
(Distinctive ring)
Set the distinctive ring (see page 25). “Distinctive Ringer” allows you to
preset memory locations with a designated ring tone. When an incoming call
is received and the Caller ID information matches the information in one of
the memory locations, the distinctive ring that has been stored for that
particular Caller will sound.
If you have set multiple memory locations with distinctive rings, switching
the setting to “Distinctive Off” will result in no distinctive ringing. All
incoming calls will have a normal ring tone. Switching to “Distinctive On” will
activate all programmed distinctive ring memory locations.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 20 ] G E TTI N G S TA R TE D
Submenu name
AutoTalk
Description
Allows you to answer the phone without pressing talk/flash or speaker.
When the AutoTalk is set to On, simply remove the handset from the cradle
and the phone automatically answers the call (see page 25).
Anykey Answer
Allows you to answer the phone without pressing talk/flash or speaker.
When the Anykey Answer is On, you can answer a call by pressing any number
key,
/tone/t, or #/s on the handset (see page 26).
Banner
Customize the name of your handset, and display it in the LCD in the standby
mode. For example, you can name the handset “John” (see page 26).
Language
Language option can be used to choose the language of your display.
You can select from English, French, or Spanish (see page 26).
Contrast
Adjust the handset LCD brightness for better viewing (10 levels) (see page 26).
Answering Setup
This menu allows you to set up TAD settings from your handset. You can also set
these setup menus from the base (see page 53).
Submenu name
Security Code
Description
Select a two-digit Personal Identification Number (PIN) code. A PIN code is
required to play your messages from a remote location, you will need to enter
a two-digit PIN code (see page 27).
Ring Time
Allows you to set the number of rings the caller hears before your answering
system plays the outgoing message. You can set the ring time to answer after
two, four, or six rings. Setting “TS” (Toll Saver), the answering system picks up
after two rings if you have new messages, and after four rings if there are none
(see page 27).
Record Time
Message Alert
Set the duration for recording the incoming messages. You have three record
time options. The options “1 minute” or “4 minutes” set the duration for
recording the incoming messages. “Announce only” answers the call with the
preset greeting or your personal greeting but prevents the caller from leaving
a message (see page 27)
Lets you know when you have a new incoming message by sounding a short
alert tone (see page 28).
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 21 ]
Submenu name
Language
Description
Select the Language of your answering system announcements from English,
French, or Spanish (see page 28).
Call Screen
Set the call screening feature to On or Off (see page 28).
Set your answering system to On or Off (see page 28).
Answer Mode
Global Setup
If you change the setting in one of the handsets, you change the settings for all
handset(s) in the Global Setup menu. Only one handset can change a setting at a time.
Submenu name
Day & time
CIDCW
Description
Set the day and time of your display (see page 29).
Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW performs the same as
regular Caller ID on call waiting number (see page 29). CW Deluxe allows you to
handle call waiting calls in seven different ways (see page 49).
Area Code
Store or edit the area code. If you enter a 3-digit area code number in the
“Area Code” option, your local area code does not appear in the Caller ID message.
For calls received from outside your local area code, you will see a full 10-digit
number (see page 29).
Note: If your calling area requires 10-digit dialing, do not program this option.
Dial Mode
Set the dial mode to tone or pulse (see page 30).
System Reset
This menu is used to clear the handset ID from the base, or the base ID from the handset.
Submenu name
Deregister HS
Description
Clear the handset ID from the base. Use this menu, for example when
you change the digital security code (see page 30).
Replacing Base
Clear the base ID. Use this menu, for example, if you replace
the base with a different base of the DCT series model
(DCT5260/DCT5280/DCT5285) (see page 30).
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 22 ] G E TTI N G S TA R TE D
Setting up the Menu
Entering the Menu
SUN 12:00A
Handset #1
New: 5
1) Press the MENU soft key in the standby mode.
For Answering Setup
menu, you can also
set them from the
base (see page 53).
2) Press volume/ L or M to move the pointer to a
desired main menu (DirectLink Mode, Handset Setup,
Answ. Setup, Global Setup, and System Reset).
MENU
CID RDL PB
MENU
3) Press the OK soft key to enter the menu. To return to
the previous screen, press the BACK soft key.
DirectLink Mode
Handset Setup
Answ. Setup
4) Use volume/ L or M to select a desired submenu,
then press the OK soft key to enter.
BACK
OK
In the submenu, volume/ L or M is used to select an
item. Press the OK soft key to confirm your setting. To return to the previous screen,
press the BACK soft key. For detailed instructions, see the following sections for the
desired submenu.
5) To exit the menu, press the end key.
• If any of the following occurs during the menu operation, the operation will be cancelled.
- Press the end key.
- Press talk/flash or speaker.
- Charge the handset.
- Receive an outside/intercom call.
• If the handset remains idle for 30 seconds, the phone will return to the standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 23 ]
DirectLink Mode
Using the DirectLink Mode
1) Enter the “DirectLink Mode” menu (see “Entering
To enter
the Menu” on page 23).
DirectLink mode
press [ENTER]
2) Press the ENTER soft key to enter the DirectLink
mode. You will hear a confirmation tone, and
“DirectLink Mode Complete” appears.
BACK
BACK
ENTER
3) To return back to the normal mode, exit the DirectLink mode. To exit the DirectLink mode,
press the CANCEL soft key, then the OK soft key, or return the handset to the cradle.
Handset Setup
• If you select “Ringer
Volume Off”, icon
appears in the display.
Setting a Ringer Volume
Ringer Volume
1) Enter the “Handset Setup” menu, then the
High
“Ringer Volume” submenu (see “Entering the Menu”
on page 23).
• If you press
volume/L in Ringer
Volume High or
volume/M in Ringer
Volume Off, you will
hear a beep.
BACK
OK
2) Press volume/ L or M to adjust the ringer settings (Ringer Volume Off, Ringer
Volume Low, or Ringer Volume High). You will hear a ringer or melody at the
selected volume (if you select “Ringer Volume Off”, no ringer or melody will sound).
3) Press the OK soft key. You will hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 24 ] G E TTI N G S TA R TE D
Selecting a Ringer Tone
1) Enter the “Handset Setup” menu, then the “Ringer
Ringer Tones
Flicker
Tones” submenu (see “Entering the Menu” on page 23).
You can choose from 8 ringers or 8 melodies:
- Ringers [Flicker, Clatter, Soft Alert, Wake Up, Light
Bug, Beep Boop, Tone Board, Chip Chop]
Clatter
BACK
OK
If you set the ringer
to Off, the ringer
tone will not sound.
- Melodies [Beethoven’s Symphony #9 (Beethoven9), For Elise (Elise), We Wish You
A Merry Christmas (Merry-Xmas), Home Sweet Home (Hm Swt Hm), Lorri Song #6
(Lorri Song), When The Irish Eyes Are Smiling (Irish Eyes), Aura Lee, Let Me Call
You Sweet Heart (Sweetheart)]
2) Press volume/ L or M to move the pointer. You will hear the ringer or melody as
you scroll through the options.
3) Press the OK soft key. You will hear a confirmation tone.
Distinctive Ringer Setup
1) Enter the “Handset Setup” menu, then the
“Distinct. Ring” submenu (see “Entering the
Menu” on page 23).
Distinctive Ring
On
Off
BACK
BACK
OK
2) Press volume/ L or M to select “On” or “Off”.
3) Press the OK soft key. You will hear a confirmation tone.
Setting the AutoTalk
Auto Talk
1) Enter the “Handset Setup” menu, then the “Auto
On
Off
Talk” submenu (see “Entering the Menu” on page 23).
2) Press volume/ L or M to change the selection,
BACK
BACK
OK
“On” or “Off”.
3) Press the OK soft key. You will hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 25 ]
Setting the Anykey Answer
1) Enter the “Handset Setup” menu, then the
“Anykey Answer” submenu (see “Entering the Menu”
on page 23).
Anykey Answer
On
Off
BACK
BACK
OK
2) Press volume/ L or M to change the selection,
“On” or “Off”.
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Banner
1) Enter the “Handset Setup” menu, then the “Banner”
submenu (see “Entering the Menu” on page 23).
2) Use the number keypad (0-9), /tone/t, #/s,
or the DELETE soft key to enter or edit the name.
To delete the current banner, press and hold the DELETE
soft key, then enter the new name.
Banner
If you don’t enter a
banner, the phone
will use the handset
ID for the banner
(for example
BACK
OK
Handset #1).
3) Press the OK soft key. You will hear a confirmation tone.
Selecting a Language
1) Enter the “Handset Setup” menu, then the “Language”
submenu (see “Entering the Menu” on page 23).
2) Press volume/ L or M to choose English, French
(Français), or Spanish (Español).
BACK
OK
3) Press the OK soft key. You will hear a confirmation tone.
Adjusting the LCD Contrast
Contrast
1) Enter the “Handset Setup” menu, then the “Contrast”
submenu (see “Entering the Menu” on page 23).
2) Press volume/ L or M to adjust the contrast of the LCD
(10 levels).
-
+
BACK
BACK
OK
3) Press the OK soft key. You will hear a confirmation tone.
If you press volume/ L in the highest contrast level or volume/ M
in the lowest contrast level, you will hear a beep.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 26 ] G E TTI N G S TA R TE D
Answering System Setup
Setting a PIN Code
Security Code
80
1) Enter the “Answ. Setup” menu, then the “Security
Code” submenu (see “Entering the Menu” on page 23).
For Answering Setup
menu, you can also
set them from the
base (see page 53).
BACK
OK
2) Enter a two-digit PIN code (01-99) using the number
keypad (0-9).
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Ring Time
1) Enter the “Answ. Setup” menu, then the “Ring
Ring Time
Toll Saver
2 Times
BACK
Time” submenu (see “Entering the Menu” on page 23).
OK
2) Press volume/ L or M to select a Ring Time
(Toll Saver, 2 Times, 4 Times, or 6 Times).
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Record Time
1) Enter the “Answ. Setup” menu, then the “Record
Record Time
1 Minute
4 Minutes
Time” submenu (see “Entering the Menu” on page 23).
2) Press volume/ L or M to select Record Time
BACK
OK
(1 Minute, 4 Minutes, or Announce Only).
3) Press the OK soft key. You will hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 27 ]
Setting the Message Alert On or Off
Message Alert
On
1) Enter the “Answ. Setup” menu, then the “Message
Alert” submenu (see “Entering the Menu” on page 23).
Off
BACK
BACK
OK
2) Press volume/ L or M to choose “On” or “Off”.
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Language of your Answering System
1) Enter the “Answ. Setup” menu, then the “Language”
submenu (see “Entering the Menu” on page 23).
2) Press volume/ L or M to choose English, French
BACK
OK
(Français), or Spanish (Español).
3) Press the OK soft key. You will hear a confirmation tone.
Setting the Call Screen
1) Enter the “Answ. Setup” menu, then the “Call Screen”
submenu (see “Entering the Menu” on page 23).
Call Screen
2) Press volume/ L or M to choose “On” or “Off”.
On
Off
3) Press the OK soft key. You will hear a confirmation tone.
BACK
BACK
OK
OK
Setting the Answer Mode
1) Enter the “Answ. Setup” menu, then the “Answer
Answer Mode
On
Off
Mode” submenu (see “Entering the Menu” on page 23).
2) Press volume/ L or M to choose “On” or “Off”.
BACK
BACK
3) Press the OK soft key. You will hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 28 ] G E TTI N G S TA R TE D
Global Setup
Setting Day and Time
Day & Time
SUN 12:00 AM
1) Enter the “Global Setup” menu, then the “Day &
Time” submenu (see “Entering the Menu” on page 23).
• You can set the
clock either by the
handset or base
BACK
BACK
NEXT
2) Press volume/ L or M to select the day of the week,
then press the NEXT soft key.
(see “Setting the
time” on page 54).
3) Press the number keypad (0-9) to set the time, then press the NEXT soft key.
• When a Global
setting is changed
from one handset,
this affects all
4) Press volume/ L or M to choose “AM” or “PM”, then press the OK soft key.
You will hear a confirmation tone.
Setting CIDCW
registered handsets.
• For setting the day
and time, the idle
time-out is extended
to 2 minutes.
1) Enter the “Global Setup” menu, then the “CIDCW”
CIDCW
CW On/CWDX Off
CW Off/CWDX Off
submenu (see “Entering the Menu” on page 23).
2) Press volume/ L or M to select “CW On/CWDX On”,
“CW On/CWDX Off”, or “CW Off/CWDX Off”, then
press the OK soft key. You will hear a confirmation tone.
BACK
OK
Setting the Area Code
1) Enter the “Global Setup” menu, then the “Area
Area Code
Code” submenu (see “Entering the Menu” on page 23).
2) Press the number keypad (0-9) to enter a 3-digit
BACK
OK
area code.
3) Press the OK soft key. You will hear a confirmation tone.
When the area code has already been stored in memory, the stored area code will be displayed.
To change it, use the DELETE soft key and number keys to enter the new area code.
Download from Www.Somanuals.com. All Manuals Search And Download.
G E TTI N G S TA R TE D [ 29 ]
Setting the Dial Mode
1) Enter the “Global Setup” menu, then the “Dial Mode” submenu
(see “Entering the Menu” on page 23).
Dial Mode
2) Press volume/ L or M to change the selection, “Tone”
Tone
Pulse
BACK
or “Pulse” (the initial setting is Tone).
3) Press the OK soft key. You will hear a confirmation tone.
BACK
OK
System Reset
De-register the Handset
1) Enter the “System Reset” menu, then “Deregister HS” submenu
(see “Entering the Menu” on page 23).
2) Press volume/ L or M to select the handset ID to be
Which Handset?
Handset #1
de-registered from the list, then press the OK soft key.
Handset #2
3) Press the OK soft key. You will hear a confirmation tone.
BACK
BACK
OK
When de-registration is complete, “Deregistration
Complete” appears.
Are you sure
to deregister
Handset #1?
4) After de-registering the handset, move to “Replacing
the Base Setting” below.
BACK
BACK
OK
Replacing the Base Setting
1) Enter the “System Reset” menu, then “Replacing
Base” submenu (see “Entering the Menu” on page 23).
“Do you want to replace Base?” appears.
Do you want to
replace Base?
BACK
BACK
OK
2) Press the OK soft key. You will hear a conformation
tone. The base information will be deleted.
When replacing the base is complete, “Please Register” appears, register the
handset(s) to the new base (see page 65).
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 30 ] G E TTI N G S TA R TE D
Making and Receiving Calls
From the handset
On the handset, you may also use the speakerphone while talking to an outside call.
Using the handset speakerphone is called “hands-free conversation”. This feature allows
you to easily communicate while performing other tasks, such as cooking.
during hands-free conversations.
• To set “Autotalk”, see
page 25 or “Anykey
appears
Answer”, see page 26.
• The handset
You can easily switch a call from normal conversation to “hands-free conversation”.
To switch a call, press the speaker key during the call.
microphone is located
at the bottom of the
handset (see “Controls
and Functions” on
page 6). Position
Normal conversation
Handset On the Cradle
Pick up the handset (AutoTalk) or pick up
Hands-free conversation
To answer a call
To make a call
To hang up
yourself as near to the
handset as possible
and speak clearly.
• If the line is in use by
another handset(s),
“Line In Use”
appears in all
registered handset’s
display, that are not
in use.
the handset and press talk/flash.
Handset Off the Cradle
Press any number key, /tone/t,or #/s
(Any Key Answer), or press talk/flash.
Handset Off the Cradle
1) Press talk/flash.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, then
press talk/flash.
Handset Off the Cradle
Press speaker.
Handset Off the Cradle
1) Press speaker.
2) Listen for the dial tone.
3) Dial the number.
OR
Dial the number, then
press speaker.
Press the end key, or return the handset to the cradle (AutoStandby).
To enter a pause within When you dial the number in the standby mode, press the PAUSE soft key.
the dialing sequence
“P” appears in the display, which represents a pause.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 31 ]
From the Base (Receiving calls only)
1) Press
(talk) and begin speaking.
2) To hang up, press
(talk).
The base microphone is located under the base
(see “Controls and Functions” on page 7).
Position yourself as near to the base as possible.
Placing a Call on Hold
1) During a call, press intercom/hold. The call will be
Hold,to transfer
Handset #2
put on hold.
Handset #3
BACK
BACK
OK
Once 10 seconds has passed or when you press the end key,
the call will be put on hold.
Line On Hold
Handset #1
New: 1
CID RDL PB
2) To talk to the caller, press talk/flash or speaker on a
handset. The phone will return back to the call.
MENU
• You can hold a call for 5 minutes, when 5 minutes has
passed, the call is disconnected and the phone returns to
the standby mode.
• While a call is on hold, CIDCW can not be received.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 32 ] B A S I C S
Redialing a Call
The last three phone numbers dialed can be quickly redialed.
Redialing from Standby Mode
• If the number
exceeds 32 digits,
only the first 32
digits are retained
in redial memory.
• If the redial memory
is empty, you will
hear a beep.
• If you have not
pressed any key for
30 seconds, the
phone returns to the
standby mode.
<Redial1>
8007303456
1) Press the CID RDL PB soft key in the standby mode.
2) Press volume/ L or M to select “Redial History”,
then press the OK soft key. The phone number that
was last dialed appears in the display.
BACK
DELETE
or
<Redial2>
2145452930
3) Press volume/ L or M to toggle through the last
three phone numbers dialed.
BACK
DELETE
4) Press talk/flash or speaker.
or
The selected number is dialed.
<Redial3>
8175551212
5) To hang up, press the end key.
• If you press the end
key, the operation
is canceled.
BACK
DELETE
Redialing from Talk Mode
1) Press talk/flash or speaker, then the MENU soft key.
2) Select the number you dialed by following steps 2-3 in “Redialing from Standby
Mode”. To go back, press the BACK soft key.
3) Press the DIAL soft key.
4) To hang up, press the end key.
Deleting a Redial Record
1) In the standby mode, recall the desired number by
following steps 1-3 in “Redialing from Standby Mode”.
2) Press the DELETE soft key.
Delete Redial1?
Yes
No
BACK
BACK
OK
3) Press volume/ L or M to choose “Yes”.
4) Press the OK soft key. The redialed number is deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 33 ]
Ringer Mute (temporarily)
You can temporarily mute the handset and the base ringer tone. To mute the handset
ringer tone, when the handset is off the cradle and the phone is ringing, press the
MUTE soft key. To mute the base ringer tone, press
on the base. The ringer tone
will return to the previous setting starting with the next incoming call.
Adjusting the Earpiece and Handset Speaker Volume
You can select different volume levels for the handset
Talk
0:15
earpiece and the handset speaker (6 levels: Low to Max).
The volume can only be adjusted during a call. Press
volume/ L or M to select the volume settings. When you
hang up, the phone keeps the last volume setting selected.
• To adjust the base
ringer or speaker
volume, see pages
52-53.
- Volume +
MUTE
MENU
Talk
0:15
If you press volume/ L in the maximum volume level or
volume/ M in the lowest volume level, you will hear a beep.
- Volume +
MUTE
MENU
Mute Microphone
With the handset
• If you press the end
key to cancel muting,
the call is
disconnected and the
phone will return to
the standby mode.
You can temporarily turn Off the microphone so that the person you are talking with
cannot hear you.
During a telephone call press the MUTE soft key to turn Off the microphone. “Mute” and
appear in the display. Press the MUTE OFF soft key to cancel muting.
With the base
While using the base speaker phone, press mute on the base to turn Off the microphone.
Press mute again or press
(talk) to cancel muting.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 34 ] B A S I C S
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse dialing (sometimes
referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-
over to tone dialing during the call. For example, entering your
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number
can be stored in a
memory location.
This is referred to as
Chain Dialing (see
page 44).
bank account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call
connects, press /tone/t. Enter the desired number. These digits
will be sent as tone dialing. Once the call ends, the tone mode is
canceled and pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, you will hear a beep and “Out
of Range” appears, then the handset returns to the standby mode. You may return
back to the call if you move your handset within the range limits of the base, and press
talk/flash or speaker within 30 seconds.
Clarity Booster
• Normally, the talk
time is 7 hours,
If you encounter interference while using your phone, you can manually improve the
sound quality for clear operation. This works only when the phone is in use.
however, when the
Clarity Booster is On,
the talk time
1) Press the MENU soft key.
Booster On
2) Select “Booster On”, then press the OK soft key.
Recording
Caller ID
duration will be up to
5 hours with fully
charged batteries.
“Clarity Booster” appears in the display.
BACK
BACK
OK
To turn Off the Clarity Booster, press the MENU soft key,
select “Booster Off”, then press the OK soft key again.
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 35 ]
3-Way Conferencing
The phone permits 3-way conversations between the handset, base, and an outside line.
When speaking on the handset
1) Press
(talk) on the base to initiate the 3-way conversation.
(talk) on the base. The handset will still
2) To hang up, press
be connected to the call.
When speaking on the base
1) Press talk/flash or speaker on the handset to initiate the
3-way conversation.
2) To hang up, return the handset to the cradle, or press the end
key on the handset. The base will still be connected to the call.
If you purchase a DCX520 extra handset, the phone permits 4-way
conversations, see “4-way Conferencing” on page 66 for details.
Intercom/ Call Transfer Feature
Intercom and transfer features are available for your phone. See “Intercom/Call Transfer
Feature” on page 67 for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 36 ] B A S I C S
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone sounds
while you are on a call, press talk/flash to accept the waiting
call. There is a short pause, then you will hear the new caller.
To return to the original caller, press talk/flash again.
You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
New Message LED
The new message LED on the handset is designed to work with your answering system.
The LED flashes when you have new messages in your answering system.
The LED stops flashing when all new messages are played back (see “Using your
Answering System” on page 58).
Download from Www.Somanuals.com. All Manuals Search And Download.
B A S I C S [ 37 ]
Phonebook
Phonebook allows you to dial a number using just a few key presses.
Your phone stores names/numbers in the phonebook memory location, and you can
search names in alphabetical order. You have a total of 100 locations that can be used
for the phonebook (including the Speed dials) and Caller ID messages.
You have a total of
100 locations.
However, Caller ID
messages and
• If any of the following occurs during a phonebook operation, the operation will be canceled.
-Press the end key. The phone will return to the standby mode (or the call will be disconnected).
-Press talk/flash or speaker.
Phonebook share the
memory locations.
-Receive an outside/intercom call.
-Charge the handset
-Receive a CIDCW (Caller ID on Call Waiting) (during a call or when the line is in use).
• If the handset remains idle for 30 seconds, the phone will return to the standby mode (or
back to the call).
Storing Phone Numbers, Names, Distinctive
Rings, and Speed Dial
1) When the phone is in the standby mode, press the CID RDL PB soft key.
2) Press volume/ L or M to move pointer to “Phonebook”, then press the OK soft key.
The handset displays the following items:
(1st line) The number of the phonebook locations used
(2nd line) How to search (press the number keypad, volume/ L or M)
(3rd line) How to enter the storing operation (press the STORE soft key)
(4th line) The BACK and the STORE soft keys.
Phonebook : 50
Search [A-Z/ / ]
Store [STORE]
BACK
BACK
STORE
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 38 ] P HO N E B O O K
3) Press the STORE soft key, “Store/Edit Name” appears.
Store/Edit Name
Movies
4) Enter the name (up to 16 characters) by using the
number keypad (see the “Steps for Entering Names and
Special characters” on page 40).
• When the memory is
full, you will hear a
beep and “Memory
Full” appears. You
cannot store names
and numbers.
• The pause key counts
as one digit. Pressing
the PAUSE soft key
more than once
BACK
DELETE
OK
If a name is not required, go to step 5. <No Name> will
be used as the name.
5) Press the OK soft key to store the name,
Store/Edit No.
8007303456
“Store/Edit No.” appears.
6) Press the number keypad to enter the phone number (up
DELETE
PAUSE
OK
to 20 digits), press the OK soft key to store the number.
increases the length
of the pause between
numbers. Each pause
replesents a 2
Distinctive Ring
No Selectn
7) “Distinctive Ring” appears. Press volume/ L or M
to move the pointer to one of the Distinctive Ring
options, then press the OK soft key.
Flicker
BACK
second delay.
OK
If you choose not to store a “Distinctive Ring”,
simply select the “No Selectn” option.
• Selecting a speed
dial location where a
number is already
stored, releases the
old number’s speed
dial setting. The new
number will be
8) “Speed Dial” appears. Press volume/ L or M to
move the pointer to select the Speed dial location
(10 locations: SPD1-SPD0).
Speed Dial
No Selectn
SPD1:<Empty>
BACK
stored in the speed
dial location.
OK
If you choose not to store the name/number as a Speed
Dial, simply select the “No Selectn” option.
Movies
800-730-3456
Flicker
BACK
9) Press the OK soft key. You will hear a confirmation
tone and “Done!” appears in the display.
/SPD2
EDIT
DELETE
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 39 ]
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters. With each
press of a number key (0-9), the displayed character appears in the following order:
Upper case letters first, lower case letters next and finally the number corresponding
to the key.
Number of times key is pressed
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 40 ] P HO N E B O O K
If you make a mistake while entering a name
Use /tone/t or #/s to move the cursor to the incorrect character.
Press the DELETE soft key to erase the wrong character, then enter the correct
character. To delete all characters, press and hold the DELETE soft key.
For example, to enter Movies:
1) When the phone is in the standby mode, recall the “Phonebook” menu by
following steps 1-2 in “Storing Phone Numbers, Names, Distinctive Rings, and
Speed Dial” on page 38.
If the next character
uses the same number
key, you must press
#/s to move the
cursor over. Otherwise
the next time you
press the number key,
it changes the
2) Press the STORE soft key, “Store/Edit Name” appears.
3) Press 6 once, then press #/s to move the cursor to right.
4) Press 6 six times.
5) Press 8 six times.
character that was
previously set.
6) Press 4 six times.
7) Press 3 five times.
8) Press 7 eight times.
9) When finished, press the OK soft key.
To continue to store the telephone number, proceed to step 6 on page 39.
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 41 ]
Viewing the Phonebook
Your phone stores names/numbers in the phonebook memory locations, and you can
search names in alphabetical order. You can view the phonebook even while the
phone is in use.
• “/SPDn” appears
when you view a
speed dial.
1) Press the CID RDL PB soft key (or the MENU soft key during a call).
2) Press volume/ L or M to move the pointer to
Phonebook : 50
Search [A-Z/ / ]
Store [STORE]
“Phonebook”, then press the OK soft key.
BACK
BACK
STORE
If you recall the phonebook during a call, the following
screen appears.
Phonebook : 50
Search [A-Z/ / ]
BACK
BACK
OK
3) Press volume/ L or M, or the number keypad to scroll through the phonebook
locations. Phonebook locations appear in alphabetical order (from first to last
when you press volume/ M, from last to first when you press volume/ L).
Or, refer to the letters on the number keys to select the first letter of the desired
name. Press a number key (2-9 and 0) once for the first letter, press twice for the
second letter, and so on. The first location that begins with the letter you
entered appears.
For example, to search for “Movies”, press 6 once. Press volume/ L or M until
the phonebook location is displayed.
4) To finish the viewing operation, press the BACK soft key repeatedly or the end key.
• During a call, don’t
press the end key
or the call will
be disconnected.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 42 ] P HO N E B O O K
Making Calls Using the Phonebook
From Standby Mode
1) When the phone is in the standby mode, view the
phonebook location to dial (see “Viewing the
Phonebook” on page 42).
Movies
800-730-3456
Flicker /SPD2
BACK
DELETE
EDIT
2) Press talk/flash or speaker. The displayed number is dialed.
3) To hang up press the end key.
From Talk Mode
1) Press talk/flash or speaker.
2) View the phonebook location to dial (see “Viewing the Phonebook” on page 42).
3) Press the DIAL soft key. The number in the displayed phonebook location is dialed.
4) To hang up press the end key.
Speed Dialing
If you store a phone number in a speed dial memory location (10 locations: SPD1 -
SPD0), you can use the speed dialing feature. When the phone is in the standby mode,
press and hold a number key (0-9) associated with the speed dial until the phone
number appears, then press talk/flash or speaker. The number stored in the speed dial
(SPD1 - SPD0) is dialed.
Editing or Erasing a Stored Name, Phone
Number, Distinctive Ring, and Speed Dial
1) When the phone is in the standby mode,
Phonebook : 50
Search [A-Z/ / ]
Store [STORE]
press the CID RDL PB soft key.
2) Press volume/ L or M to move the pointer to
BACK
BACK
STORE
“Phonebook”, then press the OK soft key.
Download from Www.Somanuals.com. All Manuals Search And Download.
P HO N E B O O K [ 43 ]
3) Press volume/ L or M, or the number keypad to view the phonebook locations
(see “Viewing the Phonebook” on page 42).
a. Editing the Stored Data
1) When the phonebook location to be edited appears,
Store/Edit Name
press the EDIT soft key. “Store/Edit Name” appears. Movies
2) Follow the steps 4 to 8 under “Storing Phone
BACK
DELETE
OK
Numbers, Names, Distinctive Rings, and Speed Dial”
on page 39 to complete the editing operation.
3) Press the OK soft key. You will hear a confirmation tone.
Delete Memory?
Yes
No
BACK
BACK
OK
b. Deleting the Stored Data
1) When the phonebook location to be deleted appears, press the DELETE soft key.
“Delete Memory?” appears.
2) Press volume/ L to move the pointer to “Yes”.
3) Press the OK soft key. You hear a confirmation tone. “Deleted!” appears in the display.
Chain Dialing
The memory locations in the handset are not limited to phone numbers. You can also
store a group of numbers (up to 20 digits), that you need to enter once your call
connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Store a special number in the phonebook
location (refer to “Storing Phone Numbers, Names, Distinctive Rings and Speed Dial”
on page 38). Once you have called your bank, and when you are prompted to enter the
account number, just as you do when viewing the phonebook location, view the special
number, then press the DIAL soft key.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 44 ] P HO N E B O O K
Caller ID
You must subscribe to Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to view the caller’s name and
phone number in the display before you answer the phone. Additionally, you can dial
the displayed number and store the information for memory dialing. Make sure you have
turned On the CIDCW feature (see page 29).
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the
Caller ID message will
not appear.
• When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller´s phone
Important:
Memory locations for Caller ID messages and Phonebook locations (including Speed
Dials) are common, you can store up to 100 in total. A Caller ID message is not stored
when you have stored 100 of the phonebook locations. The earliest Caller ID message is
overwritten when you have stored 100 of the phonebook locations and Caller ID
messages in total.
• If any of the following occurs during Caller ID operation, the operation will be canceled.
number and name
does not appear.
(This includes some
international calls.)
-
Press the end key. The phone will return to the standby mode (or the call will be disconnected).
-Press talk/flash or speaker.
-Receive an outside/intercom call.
-Receive a CIDCW (Caller ID on Call Waiting) (during a call or when the line is in use).
-Charge the handset.
• When the call is via a
private branch
• If the handset remains idle for 30 seconds, the phone will return to the standby mode
(or back to the call).
exchange (PBX), the
caller´s phone
number and name
may not appear.
1) When the Caller ID message is received, the display shows the caller’s phone number
along with the date and time. The incoming call information is stored in the Caller
ID record. If the Caller ID
service includes the
caller’s name, the name
will appear in the display
(up to 15 characters).
The date and
time received
Caller’s name
Caller’s phone number
Soft keys
12/12 12:30AM
Jane Smith
214-555-1234
MUTE
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D [ 45 ]
You may receive any one of the following messages:
When invalid data is received
“Incomplete Data”
When a private name is received
When a private number is received
When a unknown name is received
When a unknown number is received
“Private Name”
“Private Number”
“Unknown Name”
“Unknown Number”
2) When you receive the call, the display changes to “Talk”.
Viewing the Caller ID List
The Caller ID list stores information for incoming calls – even unanswered calls.
You can store 100 of the Caller ID messages and Phonebook locations (including Speed
Dials) in total. You can view the Caller ID list during a call or when the phone is in the
standby mode.
• The number of calls
from the same Caller
ID appears next to
the received time.
Once you have
1) Press the CID RDL PB soft key in the standby mode (or the MENU soft key during
a call).
reviewed the new
message, the number
will be cleared
2) Press volume/ L or M to move the pointer to “Caller ID”, then press the OK soft
key. The screen shows the number of new messages and the total number of messages.
and disappears.
3) To view the Caller ID messages in historical order (from new to old or from old to
new), repeatedly press volume/ M to scroll through the messages from the latest to
the earliest, or volume/ L to scroll back through the messages.
Or, to view the Caller ID messages with alphabetical search, press the number key pad
(2-9 and 0) with the letter associated with the first letter of the desired message.
Once you view the Caller ID list with alphabetical search, you cannot switch back to historical
order (from new to old or from old to new) unless you exit and re-enter the operation.
• During a call, don’t
press the end key
or the call will
4) To finish the viewing operation, press the BACK soft key repeatedly or the end key.
be disconnected.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 46 ] C A LLE R I D
Deleting Information from the Caller ID List
Deleting a Caller ID message
Delete Caller ID
1) When the phone is in the standby mode, view the Caller
ID information to be deleted (see “viewing the Caller ID
List” on page 46).
Yes
No
Once the Caller ID
data has been
deleted, the
information cannot
be retrieved.
BACK
BACK
OK
2) Press the DELETE soft key.
“Delete Caller ID” appears.
3) Press volume/ L or M to choose “Yes”.
4) Press the OK soft key.You will hear a confirmation tone.
Deleting all Caller ID names/numbers
1) When the phone is in the standby mode,
press the CID RDL PB soft key.
2) Press volume/ L or M to move the pointer to “Caller
ID”, then press the OK soft key. The number of new and
total records appear.
Caller ID
New : 5
Total: 25
BACK
DELETE
3) Press the DELETE soft key.
Delete All?
4) Press volume/ L or M to choose “Yes”.
Yes
No
BACK
OK
5) Press the OK soft key.You will hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D [ 47 ]
Using the Caller ID Message List
Calling a party from the Caller ID list
From Standby mode
• You cannot make a call
from the Caller ID list
if your phone is
12/12 12:30AM
Jane Smith
1) When the phone is in the standby mode, view the
Caller ID message (see “Viewing the Caller ID List”
on page 46).
214-555-1234
connected to a private
branch exchange (PBX).
BACK
DELETE
STORE
2) Press talk/flash or speaker. The displayed phone
• When a long distance
call has been set, “1”
appears in the display.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
number dials automatically.
From Talk mode
1) Press talk/flash or speaker.
2) View the Caller ID message you want to dial (see “Viewing the Caller ID list” on page 46).
3) Press the DIAL soft key. The displayed phone number will be dialed.
• If the Caller ID
message was received
as a private/unknown
number, or the
Long Distance calls and Area Code Setting/Cancellation
While the present Caller ID information is displayed, pressing /tone/t will place or
remove the prefix “1” in the display to set the call for a long distance call, or pressing
#/s will set or cancel an area code (see page 29).
message does not
have the number,
you cannot store
the message in the
Phonebook. Or it
Storing Caller ID messages in the Phonebook
was received as
Messages shown in the Caller ID list can be stored in the phonebook. The phone number
and name of the party on the Caller ID list can be stored in memory.
1) When the phone is in the standby mode, view the Caller ID message to be stored. Then
press the STORE soft key. “Store/Edit Name” appears.
private/unknown name,
the message will be
stored as <No Name>.
• Even if the 100
memory locations are
full, the message will
be stored in the
Phonebook. However,
the message will be
erased from the Caller
ID list.
2) To complete the setting, follow the steps 5-9 in “ Storing Phone Numbers, Names,
Distinctive Rings, and Speed dial” on page 39.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 48 ] C A LLE R I D
Call Waiting Deluxe Features
Your phone gives you new options for call waiting. At the touch of a button, you can
place the caller on hold, send them to your voice mail service, or conference them into
your current call. You may be required to subscribe to Call Waiting and Call Waiting
Deluxe to use these features. Not all features are available in all areas. Check with your
local telephone company for details.
• To activate features
and display the
CWDX soft key, select
“CW On/CWDX On”
in the Caller ID
1) When you receive a Call Waiting call, press the CWDX soft key for a list of options.
2) Press volume/ L or M, or the number keypad (1-7) to select an option.
For example:
setup. See page 29.
• You can also answer
a waiting call
immediately by
press M 4 times
press M 2 times
pressing talk/flash,
the first caller will be
placed on hold. To
return to the original
caller, press
1 Ask to Hold
2 Tell Busy
3 Forward Call 5 Conference
4 Answer/Drop 1 6 Drop First
5 Conference 7 Drop Last
3 Forward Call
talk/flash again.
BACK
BACK
OK
BACK
BACK
OK
BACK
BACK
OK
• To return back to a
call, press the BACK
soft key.
3) Press the OK soft key. A confirmation screen will appear, and returns back to the call.
Your phone is pre-programmed with seven call waiting options. You may select to ask
the calling party to hold, send them a busy message, forward them to your voice mail,
or answer and drop the first caller. You may also select to conference them into the
current call or, at any time, choose to drop the first or drop the last caller.
Check with your local telephone company for a full list of options.
Download from Www.Somanuals.com. All Manuals Search And Download.
C A LLE R I D [ 49 ]
The Integrated Answering Device
The phone has a built-in answering system that answers and records incoming calls.
You can also use your answering system to record a conversation, leave a voice memo
message, or to announce a special outgoing message to callers when you’re away from
your phone.
Features
• Digital Tapeless Recording
• Approx. 12 Minutes of Recording Time
• Call Screening On/Off
• Voice Prompts for Menu Setup Guidance • Time and Day Announcement
• Remote Message Retrieval
• Conversation Recording
• Trilingual Language Option
• Remote Operation from the Handset
• Selectable Outgoing Messages
• Toll Saver
• Voice Memo
• Message Alert
Digital Tapeless Recording allows you to quickly review, save, or delete the messages
you choose. You will never have to worry about a tape wearing out, jamming, or
resetting improperly.
The Integrated Answering System is easy and convenient to use, but please read
through all of the instructions carefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 50 ] THE I N TE G R ATE D A N S W E R I N G D E V I C E
Turning the Answering System On/Off
1) To turn the answering system On, press
ans on in the standby mode.
After the announcement “Answering System is on”, the current greeting message will
be played and you will hear a confirmation tone. The message counter displays the
number of messages stored in memory. If the display flashes, then there are new
messages waiting for you.
• When the answering
system is full, “
”
appears on the base.
You should delete
some messages so
that the system can
record new messages.
2) To turn the answering system Off, press
ans on. After the announcement
“Answering System is off”, the message counter display will no longer be illuminated.
You can also turn the Answering System On or Off from the handset using the menu
mode (see page 28).
Setting up your Answering System
Setting your outgoing message (Greeting)
When you receive a call, the answering system automatically plays either the
pre-recorded message or your own greeting.
• Position yourself as
near to the base as
possible and speak
clearly when
Pre-recorded message
recording your
The following message is pre-recorded:
outgoing message.
“Hello, no one is available to take your call. Please leave a message after the tone.”
• If you make an
outside call, or a call
is received on the
base during the
operation, the
operation is canceled.
Recording a personal outgoing message (Greeting)
You can record a greeting up to 30 seconds long (must be more than 2 seconds long).
1) When the phone is in the standby mode, press and hold greeting.
2) Start your recording after the announcement “Record greeting”.
The message counter displays “ ”, then begins to count down.
3) When you have finished recording your greeting, press greeting,
or set.
You will hear a confirmation tone and your recorded greeting plays back for you.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE I N TE G R ATE D A N S W E R I N G D E V I C E [ 51 ]
Choosing between the two outgoing messages
When the phone is in the standby mode, press greeting. Press greeting again when the
outgoing message is played. Each time greeting is pressed, the outgoing message is
switched between the pre-recorded and the personal outgoing message.
Deleting an outgoing message
To delete the personal outgoing message, press
del while the message is playing.
The system announces “Greeting has been deleted”.
Setting the base ringer volume
You have four ringer volume options. One allows you to turn the base ringer off. The
other three are volume levels.
• If an outside call is
received during the
operation, the
1) When the phone is in the standby mode, press ringer/vol L or M. You hear the ringer
at the current volume level (“ ” High, “ ” Medium, “ ” Low, or “ ” Off) (if you set
the base ringer volume to off “Ringer Off” is announced), and it appears on the base.
operation is canceled.
• If you press
ringer/vol L in the
maximum volume level
(3) or ringer/vol M
in the ringer off (0),
you will hear a beep.
2) Press ringer/vol L or M repeatedly until the desired ringer volume appears. You will
hear a ringer at the selected volume level. The system returns to the standby mode.
You can also set the base ringer volume or while the phone is ringing, press ringer/vol L
or M repeatedly to select the desired ringer volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 52 ] THE I N TE G R ATE D A N S W E R I N G D E V I C E
Adjusting the speaker volume level
When the base speaker is in use, press ringer/vol L or M on the base to adjust the
volume. Press ringer/vol L for louder or ringer/vol M for softer.
The numbers 1-10 appear on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.
• If you press
ringer/vol L in the
maximum volume level
(10) or ringer/vol M
in the lowest volume
level (1), you will
hear a beep.
Using the menu mode
The Menu mode allows you to set the following Answering System functions.
• To scroll through the menu options, repeatedly press
CLOCK/MENU on the base in the standby mode.
The system returns to standby after the last menu
option. A confirmation tone sounds to indicate the
standby mode.
CLOCK/MENU
• Press and hold
ringer/vol L or M
on the base to scroll
quickly through the
volume levels.
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
• If you press
, the operation is canceled.
• If the system remains idle for about 5 seconds after the
announcement, the system returns to standby.
Once
/SELECT or
/SELECT is pressed, the idle
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
time is extended to 10 seconds.
• If there is an incoming call, the operation is canceled.
• When you have completed the setting, press
the menu mode, or CLOCK/MENU to move to the next
menu option.
• You can also set these menus from the handset. See
“Answering System Setup” on page 27 for instructions.
to exit
For your convenience, voice prompts will guide you
through the menu setup mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE I N TE G R ATE D A N S W E R I N G D E V I C E [ 53 ]
Setting the Time
Follow these steps to set the clock on the answering system to the correct time.
1) Press CLOCK/MENU.
2) Press
/SELECT or
/SELECT until the correct day is announced and the
• Normally, if the
system remains idle
for 10 seconds after
/SELECT or
corresponding number (from “ ” Sunday to “ ” Saturday) appears.
3) Press SET to select the day.
4) Press
The numbers “ ” through “ ” appear on the base as each hour is announced.
5) Press SET to select the hour.
/SELECT or
/SELECT until you hear the correct hour setting.
/SELECT is
pressed, the system
will return to standby.
However, for setting
the time, the idle
time is extended to
two minutes.
6) Press
/SELECT or
/SELECT until you hear the correct minute setting.
The numbers “ ” through “ ” appears on the base as each minute is announced.
7) Press SET to select the minute.
8) Press
/SELECT or
/SELECT until you hear the correct AM or PM setting.
• Press and hold
/SELECT or
The message counter displays “ ” or “ ”.
/SELECT to
9) Press SET to select the AM/PM setting.
quickly scroll through
the numbers on
the display.
A confirmation tone sounds, the day and time you set are announced for your review.
Setting a PIN code
• Time stamp will not
be heard until you
have set the time.
To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (
the following steps:
-
). To select a PIN code, perform
1) Press CLOCK/MENU twice. The current PIN code appears on the base
and it is announced.
2) Press
/SELECT or
/SELECT until the desired number appears. Press and hold
/SELECT or
/SELECT to quickly scroll through the numbers on the display.
3) Press SET to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 54 ] THE I N TE G R ATE D A N S W E R I N G D E V I C E
Setting the ring time
The ring time setting allows you to set the number of rings the caller hears before
your answering system plays the outgoing message. You can set the ring time to
answer after two, four, or six rings. Setting “TS” (Toll Saver), the answering system
picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can
hang up after the second ring to avoid billing charges.
1) Press CLOCK/MENU three times.
The current ring time setting (“ ” 2, “ ” 4, “ ” 6, “ ” Toll saver) appears
on the base and it is announced.
2) Press
/SELECT or
/SELECT until the desired ring time appears.
3) Press SET to select the new ring time.
A confirmation tone sounds, the system announces the new ring time.
Selecting the message record time
You have three record time options. The options “1 minute” or “4 minutes” set the
duration for recording the incoming messages. “Announce only” answers the call
with the preset greeting or your personal greeting but prevents the caller from
leaving a message.
1) Press CLOCK/MENU four times.
The current recording time (“ ” 1 minute, “ ” 4 minutes, “ ” Announce only)
appears on the base and it is announced.
2) Press
/SELECT or
/SELECT until the desired message record time appears.
3) Press SET to select the new recording time.
A confirmation tone sounds, the system announces the new record time.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE I N TE G R ATE D A N S W E R I N G D E V I C E [ 55 ]
Announce only feature
The Announce only feature plays a pre-recorded outgoing message or your own personal
outgoing message, but it will not allow the caller to leave a message. To set “Announce
only”, follow the steps on page 55. To choose between the pre-recorded message or your
own personal greeting, press greeting, when the outgoing message is played. Press
greeting to select the greeting of your choice.
A confirmation tone sounds. If you want to use your own greeting, you may want to
change your greeting to omit the prompt to leave a message. Refer to “Recording a
personal outgoing message (Greeting)” on page 51.
When using the
Announce only
feature, you may want
to change your
outgoing message, if
the message prompts
the caller to leave a
message. The pre-
recorded message
changes automatically.
The following message is pre-recorded:
“Hello, no one is available to take your call. Please call again.”
Setting the message alert
Message Alert feature lets you know when you have a new incoming message by sounding
a short alert tone.
If you set the Message Alert On, and when a new message is received, the alert tone will
sound every 15 seconds. Set the Message Alert to On or Off by using the CLOCK/MENU key.
1) Press CLOCK/MENU five times. The current setting (On or Off) appears on the base and
it is announced.
2) Press /SELECT or
3) Press SET.
/SELECT to choose “ ” or “ ”.
A confirmation tone sounds, the system announces the current setting you have selected.
When the first new message is received, the alert tone will begin to sound.
Turning the message alert tone Off by pressing any key
To quickly turn Message Alert Off, press any key on the base unit and the tone will
automatically deactivate.
Turning the message alert tone Off when you are away from your phone
When all new messages are played back using the remote playback feature (see pages 61-
63) the Message Alert will automatically deactivate. The tone will not deactivate until all
new messages are played back.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 56 ] THE I N TE G R ATE D A N S W E R I N G D E V I C E
Selecting the language
You can select the Language of your answering system announcements to English,
French, or Spanish.
1) Press CLOCK/MENU six times.
The current setting (“ ” English, “ ” French, or “ ” Spanish) appears on the base,
and it is announced (“English” English, “Français” French, or “Español” Spanish).
2) Press /SELECT or
3) Press SET.
/SELECT to select the language.
A confirmation tone sounds, the system announces the new setting in the
selected language.
Setting the call screen
You can screen calls when the Call Screen function is set to On.
1) Press CLOCK/MENU seven times.
The current Call Screen setting (On or Off) appears on the base.
2) Press
/SELECT or
/SELECT to choose “ ” or “ ”.
3) Press SET. A confirmation tone sounds, and the system announces the new setting.
You can mute the Call Screen temporarily. When the system is answering, press
The Call Screen function resumes when the system is no longer in answering mode.
Additionally, to adjust the volume, press ringer/vol L or M.
.
If you set the answering system to Off, you cannot screen a call.
Screening a call
To screen an incomming call, do the steps as follows:
1) After the answering system answers, the base speaker will let you hear the
calls as the machine records the message.
2) To answer the call, press
(talk) or pick up the handset from the base
(when AutoTalk is set to On). If the handset is away from the base, press
talk/flash, speaker or any number key, /tone, or # (when AutoTalk is set
to On). The answering system will disconnect automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE I N TE G R ATE D A N S W E R I N G D E V I C E [ 57 ]
Using your Answering System
The message counter displays the number of messages stored in memory. If the display
flashes, then there are new messages waiting for you. The answering system is designed
to play your new messages first. After you play all your new messages, you can then play
your old messages.
• If an outside call is
received during the
operation, the
operation is canceled.
Playing your messages
1) When the phone is in the standby mode, press
.
The system announces the number of new and old messages while the message counter
displays only the number of new messages. The time and day that each message was
received is announced after the message is played. The message counter will then
display the number of current stored messages.
2) When all new messages have been played, you hear a confirmation tone and the system
announces “End of message”. The system returns to standby. After you have reviewed
your new messages, you can play your old messages by again pressing
.
Once you have listened to a new message, it then becomes an old message. The old
messages will be played in the order in which they were received.
Repeating a message
• To stop playing your
messages, press
1) Press
to review your messages. The number of stored messages is announced.
again at any time.
2) To repeat the current message, press
message. To quickly scroll backwards through a message, press and hold
To repeat the previous message, press /SELECT within a few seconds (about 4
seconds during remote operation) after a message begins playing. If you have several
messages, press /SELECT repeatedly until you return to the message you want to
/SELECT after a few seconds of beginning the
/SELECT.
• When the answering
system is full, “
”
appears on the base.
You should delete
some messages so
that the system can
record new messages.
(Refer to “Deleting a
message” on page 59.)
replay. If the current message is the first new message, the system plays back from the
beginning of the current message (it does not go back into the old message group).
3) Press
at any time to stop reviewing messages and return to standby.
The message counter shows the number of messages stored in memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 58 ] THE I N TE G R ATE D A N S W E R I N G D E V I C E
Skipping a message
1) Press
2) Press
to review your messages. The number of stored messages is announced.
/SELECT at anytime to skip to the next message.
Each time
/SELECT is pressed, the system scans forward one message. If you
have several messages, press
to play. To quickly scroll through a message, press and hold
advances through the playback at double speed.
/SELECT repeatedly to find the message you want
/SELECT. The system
3) Press
at anytime to stop reviewing your messages and return to standby.
The message counter shows the number of messages stored in memory.
Deleting a message
To maintain maximum record time, delete the old messages.
1) Press
2) Press
to review your messages.
del at anytime during the message to delete the message.
You hear a confirmation tone and the message is deleted.
3) To delete all messages, press
del in the standby mode. Press
del again after
the announcement “To delete all message, press delete again.”.
When you try to delete all messages without first listening to your new messages, you
hear several short beeps followed by an announcement “Please playback all messages”.
This protects you from accidentally erasing messages you have not yet reviewed.
Important:
When you press
del, you are permanently deleting the message. Once deleted, the
message cannot be replayed or retrieved.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE I N TE G R ATE D A N S W E R I N G D E V I C E [ 59 ]
Voice memo
The voice memo function allows the user to record messages (more than 2 seconds and
within 4 minutes).
1) Press and hold memo rec. You hear a beep.
2) Start your recording after the announcement “Record Memo Message” and a
confirmation tone. The message counter displays “ ”.
3) When you have finished, press memo rec,
, or set to stop recording. The system
returns to standby.
• The voice memo messages are recorded as an incoming messages.
• When the answering system is full, “ ” appears on the display and recording is terminated.
• If an outside call is received during the operation, the operation is canceled.
Recording a conversation
You can record a conversation from the handset or the base (more than 2 seconds and
within 10 minutes).
•
A recorded conversation is treated as an incoming message and will be added to the stored messages.
• You cannot record 3-way or intercom conversations.
When the answering system becomes full, “ ” appears on the display and recording is terminated.
Every state has
different regulations
governing the
•
recording of
conversations over
the telephone.
From the handset
1) During a conversation, press the MENU soft key on the handset.
2) Press volume/ L or M to select “Recording”, then press the OK soft key.
appears on the handset, and “ ” flashes on the base.
A confirmation tone, that can be heard by both parties, sounds during recording.
3) Press the STOP soft key to finish recording. You will hear a confirmation tone.
Make sure to check
your local, state and
federal laws before
using this product to
record any telephone
conversation in order
to determine that
your use is in
From the base
1) During a conversation using the base speaker phone, press and hold memo rec on
compliance with such
laws or guidelines.
the base until you hear a confirmation tone. The unit begins recording and “
”
flashes on the display.
A confirmation tone, that can be heard by both parties, sounds during recording.
2) To stop recording, press
or memo rec. You hear a confirmation tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 60 ] THE I N TE G R ATE D A N S W E R I N G D E V I C E
Remote Operation
You can operate your answering system from a remote location using any touch-tone
telephone or the handset.
For your convenience
a remote operation
card is provided for
you to use while
Remote access away from home
You can check, play, or delete messages, even record a new greeting message when
you are away from home. Additionally, you can turn On or Off your answering system
from a remote location.
away from home
(refer to page 79).
• Time stamp will not be heard until you have set the time. see “Setting the Time” on page 54.
• The system will only playback messages for four minutes and then it returns to the command
waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds.
•
If you enter an incorrect PIN code three times, you will hear a beep and the system will
return to standby.
• During the remote operation, “ ” appears on the base.
1) Call your telephone number and wait for the system to answer. If the answering
system is off, it will answer after about 10 rings and sounds a series of beeps.
2) During the greeting message (or a series of beeps when the answering system is
off), press 0 and enter your PIN code within 2 seconds (see “Setting a PIN Code”
on page 27 or 54).
3) The answering system announces the current time and the number of messages
stored in memory. You hear “To play incoming messages, press zero-two. For help,
press one-zero”. You will hear a beep.
4) Enter a command within 15 seconds, each command there after must be entered
within 2 seconds. You may select a command from the following chart:
Download from Www.Somanuals.com. All Manuals Search And Download.
THE I N TE G R ATE D A N S W E R I N G D E V I C E [ 61 ]
Command Function
Command Function
0 then 1 Repeat a Message*
0 then 2 Playing incoming Messages
0 then 3 Skipping a Message
0 then 4 Deleting a Message
0 then 5 Stop Operation
0 then 6 Answering System On
0 then 7 Memo Record/Stop **
0 then 8 Greeting Message Record/Stop **
0 then 9 Answer System Off
1 then 0 Help Guidance
* For Repeat a Message function, press 0 then 1 within about four seconds to repeat
the previous message, or press 0 then 1 after about four seconds to repeat the
current message.
** For Memo Record and Greeting Message Record function, the first time you enter the
corresponding command, it starts the Recording function. If you want to stop the
recording, press 0 then 7 or 8.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this
time from the chart above.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Remote access with the handset
You can check your new incoming messages, skip, repeat, or delete your incoming
messages with the handset. For example, you can install the answering system in the
living room, and check your incoming message from a bedroom with the handset.
You can also use speakerphone on the handset for remote operation (see “Making and
receiving calls” on page 31).
•
If you press the end key before the answering system answers, the phone will return to standby.
• When the answering system does not answer within 6 seconds, you hear a beep and the
phone will return to standby.
• The base’s keypad is disabled during remote operation.
• When you receive a call, the remote operation is canceled.
• You can change the handset volume during a remote operation.
• During the remote operation “ ” appears on the base.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 62 ] THE I N TE G R ATE D A N S W E R I N G D E V I C E
Playing incoming messages
1) When the phone is in the standby mode, press the
soft key on the handset.
“Remote Playback” appears on the handset display. The answering system
announces the current time and the number of messages stored in the memory.
Messages will be played in the order in which they were received. The time and
day that each message was received is announced after the message is played.
2) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
• If you have new
messages and old
messages, only the
new messages will be
played. After you
have reviewed your
new messages, you
can play your old
messages by again
pressing the
When the last message has been played, the system announces “End of messages”.
And the system returns to standby.
soft key. Once you
have listened to a
new message, it then
becomes an
old message.
• If you have new
messages and old
messages, only the
new messages will
be repeated.
Repeating a message
After a message begins playing, press the
repeat the previous message, or press the
repeat the current message.
soft key within about four seconds to
soft key after about four seconds to
• If you press the
soft key while the
earliest message is
playing, you can
repeat only the
Skipping a message
While the message is playing, press the
soft key on the handset. Each time
the
soft key is pressed, the system scans forward one message.
current message.
Deleting a message
While the message is playing, Press the DELETE soft key on the handset. The message
playing is deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE I N TE G R ATE D A N S W E R I N G D E V I C E [ 63 ]
Expanding Your Phone
Your phone supports up to 4 handsets (including the handset(s) supplied with your
phone). You can now place a fully featured cordless handset anywhere AC power is
available to connect the handset charger.
• To use the DCX520,
register it to the
Effective combinations, for example:
DCT5280 series base.
- 4-way conferencing (the base, 2 handsets, and one outside line), while on an intercom
call using the other 2 handsets, or
• Save this manual for
the detailed operation.
• All of the handsets
ring when a call
is received.
- 4-way conferencing (3 handsets and an outside line)
IMPORTANT:
• If you purchase a DCX520 extra handset, please register the handset to the DCT5280
series base before use. The DCX520 will not operate until it is registered.
• If you change a setting of the Global Setup menu in one of the handsets, you
change settings for all the handsets. For all other features they must be set
separately through each handset.
Connecting the Charger
1) Connect the AC adapter to the DC IN
9V jack and to a standard 120V AC
wall outlet.
2) Set the charger on a desk or tabletop,
and place the handset in the charger
with the keypad facing forward.
(See “B. Install the AA batteries into
the handset” on page 13).
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 64 ] E XPA N D I N G YO U R P HO N E
Register the Handset
If you purchase an extra handset, you need to register the handset before use.
Only one handset can be registered at a time.
An extra handset can
be registered when
the base is in the
standby mode.
The handset ID for the supplied handset(s) was assigned at the factory, which has #1
(#1 and #2 for DCT5280-2) in the display. When you register additional handsets to the
base, the handset ID will be assigned.
1) Before registering the extra handset, charge the phone’s battery for 10 minutes.
2) Place the extra handset in the main base unit to begin registration.
3) While the handset is registering, “Handset Registering” will appear in the LCD.
When “Registration Complete” is displayed, the handset has been registered to
the base. If “Registration Failed” appears, please try these steps again.
4) Place the handset back in the charging cradle and fully charge the phone’s battery
for 17 to 20 hours.
Using the DirectLink Mode
To use this feature, you must enter the two handsets into the DirectLink mode first.
To enter the DirectLink mode e See page 24
• During DirectLink Mode, batteries use time when fully charged is as follows:
- Up to 7 hours continuous use.
- Up to 24 hours in the standby mode.
• Placing the handset in the cradle causes the handset to exit the DirectLink mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
E XPA N D I N G YO U R P HO N E [ 65 ]
DirectLink call
SUN 12:00A
Handset #1
1) When the phone is in the DirectLink standby mode,
press the DirectLink soft key. (Example of DirectLink
from handset #1).
DirectLink Mode
CANCEL
DirectLink
2) Select the party by pressing the number keys (1-4).
To DirectLink
press 1-4
BACK
Your handset will page the other handset.
3) On the receiving handset, press talk or the ANSWER
soft key, or any number key, /tone/t, or #/s
(when Anykey Answer is On).
DirectLink
from Handset #1
BACK
ANSWER
OK
4) When you finish your conversation, press the end key or the END soft key on
either handset.
Return the handset to the cradle, or press the CANCEL soft key then the OK soft key
to return to normal mode.
4-Way Conferencing
Fourth person, at either the handset or the base, may be added to the conference call.
For example, to add a fourth party to an ongoing conference call at the base or another
handset, press talk/flash on the fourth party’s handset (or
remove either caller from your conversation, press the end key on the party’s handset
(or (talk) on the base). The other parties will still be connected to the call.
(talk) on the base). To
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 66 ] E XPA N D I N G YO U R P HO N E
Intercom/Call Transfer Feature
Intercom and Call Transfer features are available for your phone.
• If the party is busy or out of range, you will hear a beep and the handset returns to the
standby mode.
• If any of the following occurs, the operation will be canceled.
- Press talk/flash or speaker on the handset, and
(talk) on the base.
- Receive an outside/intercom call (while selecting the other handset).
• When the party does not answer within 1 minute, Intercom or Call Transfer is canceled.
Intercom
From handset to handset or to the base
1) Press intercom/hold in the standby mode.
To intercom
Handset #2
Handset #3
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press volume/ L or M, then
press the OK soft key.
BACK
BACK
OK
If you select “All”, all handsets and the base will be paged. An intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press talk/flash,
intercom/hold, or the ANSWER soft key (or intercom or
(talk) on the base).
Or press any number key, /tone/t, or #/s (when Any Key Answer is On), or pick
up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press the end key or the END soft key on either
handset (or intercom on the base).
From the base to a handset
1) Press intercom on the base in the standby mode.
2) All the handsets will be paged.
3) On the receiving handset, to answer the call, press talk/flash, intercom/hold, or the
ANSWER soft key. Or press any number key, /tone/t, or #/s (when Any Key
Answer is On), or pick up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press the end key or the END soft key on the handset
or intercom on the base.
Download from Www.Somanuals.com. All Manuals Search And Download.
E XPA N D I N G YO U R P HO N E [ 67 ]
Call Transfer Feature
From handset to handset or to the base
1) During a call, press intercom/hold on the handset.
2) Select a handset or the base to transfer the call to
within 10 seconds (refer to step 2 under “Intercom”
section). The call will automatically be placed on hold,
and an intercom tone sounds. To cancel the transfer,
press the CANCEL soft key, talk/flash, speaker, or the
BACK soft key on the initiating handset.
Hold,to transfer
Handset #2
Handset #3
BACK
BACK
OK
3) On the receiving handset, to answer the page, press talk/flash, intercom/hold, or the
ANSWER soft key (or (talk) or intercom on the base). Or press any number key,
/tone/t, or #/s (when Any Key Answer is On), or pick up the handset from the
cradle (when AutoTalk is On). The intercom mode is activated, but the caller is still
on hold.
4) To speak to the caller, press talk/flash or speaker (or
(talk) on the base) on the
receiving handset.
From the base to a handset
1) During a call, press intercom on the base. The call will automatically be placed on
hold, and an intercom tone sounds. All the handset(s) will be paged.
2) On the receiving handset, to answer the call, press talk/flash, intercom/hold, or the
ANSWER soft key. The intercom mode is activated, but the caller is still on hold.
Or press any number key, /tone/t, or #/s (when Any Key Answer is On), or pick
up the handset from the cradle (when AutoTalk is On).
3) To speak to the caller, press talk/flash, or speaker on the receiving handset.
Replacing the Base
When you replace the base with a different base of the DCT series model (DCT5260,
DCT5280, or DCT5285 series), you need to clear the handset and base ID. To do this,
perform the “System Reset” menu options (“De-register the Handset” and “Replacing the
Base Setting” (see page 30), then register all the handsets you have (see page 65).
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 68 ] E XPA N D I N G YO U R P HO N E
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary. In the rare situation that you
suspect another cordless telephone is using the same security code, you can change the
code. To change the digital security code:
1. Perform the “System Reset” menu options (“De-register the Handset” and
“Replacing the Base Setting”) for all the handsets you have (see “System Reset”
on page 30).
2. To register all the handsets do the following steps:
1) Place a handset, one at a time in the base.
2) Registration starts automatically.
While registering “Handset Registering” appears in the display.
3) When the registration is complete, “Registration Complete” appears in the display.
4) Repeat steps 1-3 for another handset(s).
If the registration fails, “Registration Failed” appears in the display. Try the steps
above again.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
Headset Installation
Your phone may be used with an optional headset, the Uniden
HS910. To use this feature, insert the headset plug into the
headset jack. Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts Department
or visiting the web site. See page 11.)
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 69 ]
Note on Power Sources
Battery replacement and handling
When the operating time becomes short, even after a battery is recharged, please replace the battery.
Please use only “AA” rechargeable Ni-MH batteries.
Warning
To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden
adapter model specifically designated for this product, and “AA” rechargeable Ni-MH batteries.
Power Failure
During the period that the power is off, you will not be able to make or receive calls with the telephone.
Caution
• Use only “AA” rechargeable Ni-MH batteries.
• Do not remove the batteries from the handset to charge them.
• Never throw the batteries into a fire, disassemble them, or heat them.
• Do not remove or damage the battery casing.
Maintenance
When the handset or base unit becomes slightly dirty
Wipe with a soft, dry cloth.
Caution
Do not use paint thinner, benzene, alcohol,
or other chemical products.
Doing so may discolor the surface of the
telephone and damage the finish.
When the handset or base unit becomes very dirty
Wipe with a soft cloth that has been dampened with
diluted, neutral detergent. Dry with a dry cloth.
When the charging contacts become very dirty on both the handset and base unit
Using water only, dampen a cloth to clean the charging contacts. Then make sure to go back over the
charging contacts with a dry cloth before returning the handset to the base unit to charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 70 ] A D D I TI O N A L I N FO R M ATI O N
General Information
The phone complies with FCC Parts 15 and 68. Operating temperature: 0 ºC to +50 ºC (+32 ºF to +122 ºF)
AC Adapter Information
AC Adapter part number:
Input Voltage:
AD-830 for the base
120V AC 60Hz
9V DC 400 mA
AD-310 for the charger (DCT5280-2 only)
120V AC 60Hz
9V DC 210 mA
Output Voltage:
Battery Information
Battery part number:
Capacity:
BT-211AR
1500 mAh, 1.2V
Battery use time (per charge) from fully charged:
Talk mode duration (normal or DirectLink mode) Up to 7 hours (up to 5 hours when the Clarity Booster is On)
Standby mode duration Up to 14 days (up to 24 hours in DirectLink mode)
If the handset is left off of the cradle, the actual Talk mode duration will
be reduced respective to the amount of time the handset is off the cradle.
Recharge your phone on a regular basis by returning the handset to the cradle after each phone call. When
the operating time becomes short, even after the batteries are recharged, please replace the batteries.
A replacement Uniden adapter may be purchase at your local Uniden dealer or by contacting the Uniden Parts
Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. CST, Monday through Friday. We can also
For replacement batteries, use only “AA” rechargeable Ni-MH batteries. Do Not use Alkaline, Lithium, or non-
rechargeable batteries. To insure maximum performance and safety, replacement batteries specifically matched
could cause bodily injury.
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
A D D I TI O N A L I N FO R M ATI O N [ 71 ]
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The charge LED won’t illuminate
when the handset is placed in
the cradle.
• Make sure the AC adapter is plugged into the base
(or the charger (for DCT5280-2 only)) and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and the base
(or the charger (for DCT5280-2 only)) are clean.
The audio sounds weak
and/or scratchy.
• Move the handset and/or base to a different location away from
metal objects or appliances and try again.
• Make sure that you are not too far from the base.
Can’t make or receive calls.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Remove the base ID (see “Replacing the Base Setting” on page 30) and
register the handset (see “Register the Handset” on page 65).
• Make sure that you are not too far from the base.
• If an outside call is already established, you may not be able to make
another outside call.
Can’t make an internal call.
• Make sure that the receiving handset is not already in use.
• Make sure that the handset or the base is in the standby mode.
• When a handset is recording a conversation, an intercom call from the base is not
available. Make sure a handset is not recording a conversation.
The handset or the base doesn’t ring • Charge the batteries in the handset for 17-20 hours by placing the handset on
or receive an intercom call.
the base or charging cradle.
• The handset may be too far away from the base unit.
• Place the base unit away from appliances or metal objects.
• Remove the base ID (see “Replacing the Base Setting” on page 30) and
register the handset (see “Register the Handset” on page 65).
“Unavailable” appears in
the display.
• Make sure that another handset(s) or the base is not in use, and try the phone again.
• Make sure that you are not too far from the base.
Severe noise interference.
• Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems, intercoms,
room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 72 ] TR O U B LE S HO O TI N G
Symptom
Suggestion
The Caller ID does not display.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current.
You cannot register the
handset at the base.
• Please make sure your batteries are charged at least 10 minutes
(see “Register the Handset” on page 65).
• Remove the base ID (see “Replacing the Base Setting” on page 30) and
register the handset (see “Register the Handset” on page 65).
• Only 4 handsets can be registered to the base.
The handset doesn’t communicate
with the base or other handsets.
• Remove the base ID (see “Replacing the Base Setting” on page 30) and
register the handset (see “Register the Handset” on page 65).
• Make sure that you have registered all handsets (DCX520 only).
The handset or the base can’t join
the conversation.
• Make sure that more than 3 handsets (or 2 handsets when the base is used for
the conference) are not in use.
• When recording a conversation, the 2nd handset (or the base) cannot join
the conversation.
The answering system does not work. • Make sure the base unit is plugged in.
• Make sure that the answering system is turned On.
• Make sure that the message record time is not set to Announce only
(see page 55).
Messages are incomplete.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
After a power failure, the outgoing
message is deleted.
• Record your greeting again. The default message should remain.
No sound on the base unit
speaker during call monitoring
or message playback.
• Adjust the speaker volume on the base unit.
• Make sure the call screen feature is set to On.
Cannot access remote call-in features • Make sure you are using the correct PIN number.
from another touch-tone phone.
• Make sure that the touch-tone phone you’re using can transmit the tone
for at least two seconds. If it cannot, you may have to use another phone to
access your phone.
Time stamp cannot be heard.
If you still have a problem.
• Make sure you have set the time (see “Setting Day and Time” on page 29
or “Setting the Time” on page 54).
• Call our customer hotline at 1-800-297-1023.
Download from Www.Somanuals.com. All Manuals Search And Download.
TR O U B LE S HO O TI N G [ 73 ]
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the
following steps.
Case
Action
If the handset or base is exposed
to moisture or liquid, but only
affects the exterior plastic housing.
Wipe off the liquid and use as normal.
If moisture or liquid has entered
the plastic-housing (i.e. liquid
can be heard in the phone or
liquid has entered the handset
battery compartment or vent
openings on the base).
Handset:
1) Remove the battery cover and leave it off for ventilation.
2) Remove the batteries by disconnecting.
3) Leave the battery cover off and the batteries disconnected for at least 3 days.
4) Once completely dry, reinstall the batteries and the battery cover.
5) Recharge the handset’s batteries for 20 hours in the base unit before using
the phone.
Base:
1) Disconnect the AC adapter from the base unit, cutting off electrical power.
2) Disconnect the telephone cord from the base unit.
3) Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the batteries
to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause
permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth TX76155
1-800-554-3988. Monday through Friday
8 a.m. to 5 p.m. CST
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 74 ] TR O U B LE S HO O TI N G
Additional Battery Safety Precautions
Precautions!
Important Safety Instructions
Caution!
To reduce the risk of fire or injury to persons by the
battery, read and follow these instructions:
Before you read anything else, please observe the following:
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock,
and injury to persons:
Warning!
1. Use only the batteries specified in the owner’s manual.
2. Do not dispose of the batteries in a fire. The cell may explode.
Check the Nickel Metal Hydride battery disposal package insert for
disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be
toxic if swallowed.
4. Exercise care in handling the battery in order not to short the
battery with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
5. Charge the batteries provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the owner¬s manual provided for this product.
6. Observe proper polarity orientation between the batteries and
battery charger.
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to
the unit, DO NOT expose this unit to rain or moisture.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a
dry cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product
should never be placed near or over a radiator or heat register.
This product should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your dealer or local
power company.
8. Do not allow anything to rest on the power cord. Do not locate
this product where the cord will be damaged by persons walking
on it.
Rechargeable Nickel-Metal-Hydride Battery Warning
•
This equipment contains a rechargeable Nickel-Metal-Hydride battery.
• Nickel is a chemical known to state of California to cause cancer.
• The rechargeable Nickel-Metal-Hydride battery contained in this
equipment may explode if disposed of in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable Nickel-Metal-Hydride battery
used in this equipment in any charger other than the one
designed to charge this battery as specified in the owner’s
manual. Using another charger may damage the battery or
cause the battery to explode.
SAVE THESE INSTRUCTIONS!
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
Rechargeable Nickel-Metal-Hydride
Batteries Must Be Recycled or
Disposed of Properly
9. Do not overload wall outlets and extension cords, as this can
result in the risk of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electric shock. Never
spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product.
Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
The FCC Wants You To Know
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner’s manual, could void your authority to operate this
product. Your telephone complies with Part 68 of FCC Rules. You must,
upon request, provide the FCC registration number and the REN to
your telephone company. Both numbers are on the base unit.
Uniden works to reduce lead content in our PVC coated cords in our
products and accessories.
Note: You must not connect your phone to:
•
coin-operated systems
WARNING:
•
most electronic key telephone systems
The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
Range
Your new phone is designed to achieve the maximum possible range
by transmitting and receiving according to the highest specifications
set forth by the FCC. We have rated this phone to operate at a
maximum distance with the qualification that the range depends upon
the environment in which the telephone is used. Many factors limit
range, and it would be impossible to include all the variables in our
rating. The Maximum Range rating of this phone is meant to be used
as a means of comparison against other range claims.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the
operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive repair work by a qualified technician.)
E. If the product has been dropped or the cabinet has
been damaged.
F. If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of
the leak.
Download from Www.Somanuals.com. All Manuals Search And Download.
P R E C A U TI O N S & WA R R A N TY [ 75 ]
Telephone Line Problems
Installation Considerations
Selecting a Location
One Year Limited Warranty
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the
telephone line. Also, the telephone company may make changes in
facilities and services which may affect the operation of your unit.
However, your telephone company must give adequate notice in
writing prior to such actions to allow you time for making necessary
arrangements to continue uninterrupted service.
Important:
Evidence of original purchase is required
for warranty service.
Before choosing a location for your new phone, there are some
important guidelines you should consider:
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
• The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which
does not have a switch to interrupt its power.)
• Keep the base and handset away from sources of electrical noise
such as motors or fluorescent lighting.
• The base can be placed on a desk or tabletop or mounted on a
standard telephone wall plate.
• You should charge your new phone for 17-20 hours before
completing the installation or using the handset.
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects
in materials and craftsmanship with only the limitations or
exclusions set out below.
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your problem.
If you determine that it is the cause, you must leave it disconnected
until the trouble has been corrected.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is
(A) damaged or not maintained as reasonable or necessary,
(B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden,
(C) improperly installed, (D) serviced or repaired by someone other
than an authorized Uniden service center for a defect or malfunction
covered by this warranty, (E) used in any conjunction with equipment
or parts or as part of any system not manufactured by Uniden, or
(F) installed or programmed by anyone other than as detailed by the
owner’s manual for this product.
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This interference
is caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around
your home to see what appliances may be causing the problem. In
addition, we recommend that the base not be plugged into a circuit
that also powers a major appliance because of the potential for
interference. Be certain that the antenna on the unit is fully extended
when needed.
Telephone Line Outlets
There are two types of phone outlets:
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords
are fitted with a molded plastic connector which plugs into this type
of jack. If you do not have modular phone jacks,
contact your local telephone company for information about
their installation.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in
effect, warrantor will either, at its option, repair or replace the
defective unit and return it to you without charge for parts,
service, or any other cost (except shipping and handling) incurred
by warrantor or its representatives in connection with the
performance of this warranty. Warrantor, at its option, may replace
the unit with a new or refurbished unit. THE LIMITED WARRANTY
SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING
TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT
COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not
allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
Hardwired Jack
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference, you
need to change to a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate
the interference.
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of installation
is not difficult; however, you should contact your Uniden telephone
dealer or a telephone supply store for advice about the proper adapter
or converter for your particular situation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the
telephone cords:
Caution!
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
More than One Cordless Telephone
• Use caution when installing or modifying telephone lines.
LEGAL REMEDIES: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This
warranty is void outside the United States of America and Canada.
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to
select a channel that provides the clearest communication.
Applying Power to the Base
This phone requires an AC outlet, without a switch to interrupt power,
and the included AC adapter. To relieve strain on the DC plug when
the phone is placed on a desk or table, wrap the power cord around
the strain relief notch on the bottom of the base.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain
that the Product is defective, pack the Product carefully
(preferably in its original packaging). The Product should include
all parts and accessories originally packaged with the Product.
Include evidence of original purchase and a note describing the
defect that has caused you to return it. The Product should be
shipped freight prepaid, by traceable means, to warrantor at:
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other than
your own cordless telephone unit. Consequently, any communications
using your cordless telephone may not be private.
NOTE:
Place the power cord so that it does not create a trip
hazard, or where it could become chafed and create a fire
or other electrical hazards.
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Fort Worth, TX 76155
1-800-297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 76 ] P R E C A U TI O N S & WA R R A N TY
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC, before the
registration number signifies that registration was performed based on a Declaration of Conformity
indicating that Industry Canada technical specifications were met. It does not imply that Industry
Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment
itself. The REN assigned to each terminal equipment provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device. “Privacy of communications may not be ensured when using this telephone”.
Download from Www.Somanuals.com. All Manuals Search And Download.
I . C . N O TI C E [ 77 ]
Index
0 - 9
Storing....................................48
Using......................................48
Viewing ..................................46
Call transfer feature ....................68
Chain dialing ............................44
Clock ..................................29, 54
Conversation, recording ..............60
Outgoing message ......................51
3-way conferencing ....................36
4-way conferencing ....................66
16 ring options ..........................25
P, Q
Phonebook ................................38
Editing....................................43
Erasing....................................43
Making calls ............................43
Storing....................................38
Viewing ..................................42
Precautions................................75
A
Announce only feature ................56
Answering system
Deleting a message ..................59
Playing your messages ..............58
Recording a conversation ..........60
Remote access..........................61
Repeating a message ................58
Skipping a message ..................59
Turning On/Off....................28, 51
Anykey answer............................26
Area code ..................................29
AutoTalk....................................25
D
Deluxe Call Waiting features ........49
De-register the handset ..............30
Dialing mode ........................15, 30
Digital security code ..............10, 69
Distinctive ringer........................25
R
Receiving a call ....................31, 32
Redialing a call ..........................33
Register the handset ..................65
Remote access
E, F, G, H
Earpiece volume..........................34
Expanding your phone ................64
Hands-free conversation ..............31
Headset installation ....................69
away from home ......................61
from your handset ....................62
Replacing the base......................68
Ringer volume
handset ..................................24
base ......................................52
B
Banner......................................26
Base speaker volume ..................53
Battery
I, J, K, L
I.C. Notice ................................77
Important safety instructions........75
Intercom ..................................67
Language
S
Preparing and charging ..............13
Replacement and handling..........70
Beltclip ....................................69
Booster ....................................35
Setting up
base unit ................................12
extra handset ..........................64
handset ..................................13
Soft key function..........................9
Speed dialing ............................43
handset ..................................26
base ......................................57
LCD contrast ..............................26
Liquid damage............................74
C
Caller ID
Caller ID service ......................45
Calling ....................................48
Call Waiting........................29, 49
Deleting ..................................47
Setting....................................29
M, N, O
T, U, V, W, X, Y, Z
Maintenance ..............................70
Making a call ............................31
Mute ........................................34
New message LED........................37
Transferring a call ......................67
Voice memo ..............................60
Warranty....................................76
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 78 ] I N D E X
Remote Operation Card
C U T
REMOTE OPERATION CARD
Remote access away from
home
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the help guidance.
3. To quit, hang up the phone.
4. Press 0 then 6 to turn the
answering system on.
Download from Www.Somanuals.com. All Manuals Search And Download.
R E M O TE O P E R ATI O N C A R D [ 79 ]
C U T
Task
Repeat a Message
Key
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
Download from Www.Somanuals.com. All Manuals Search And Download.
[ 80 ] R E M O TE O P E R ATI O N C A R D
At Uniden, we’ll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 8:00 AM to 5:00 PM CST.
Accessibility
?
For information on the accessibility features of this product, please call
1-800-874-9314 (V/TTY)
May be covered under one or more of the following U.S. patents:
4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690
5,434,905 5,491,745 5,533,010 5,543,605 5,574,727 5,581,598
5,650,790 5,660,269 5,661,780 5,663,981 5,671,248 5,696,471
5,717,312 5,732,355 5,754,407 5,758,289 5,768,345 5,787,356
5,794,152 5,801,466 5,825,161 5,838,721 5,864,619 5,893,034
5,912,968 5,915,227 5,929,598 5,930,720 5,960,358 5,987,330
6,044,281 6,070,082 6,125,277 6,253,088
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|