Uniden Cordless Telephone D1481 User Manual

D1481/1483 User's Guide  
What's in the box?  
Base with answering system  
and cordless handset  
Not pictured for base:  
x Rechargeable battery (BT-1021)  
x Battery cover  
x AC adapter (PS-0035)  
x Telephone cord  
x If any items are missing or damaged, contact our Customer Care Line  
immediately. Never use damaged products!  
x Call waiting, CID, CIDCW, and Voice Mail are telephone line services.  
Contact your provider for details.  
If You...  
Contact Uniden’s...  
Customer Care Line*  
Parts Department*  
Accessibility Help Line  
Phone Number  
817-858-2929 or  
800-297-1023  
800-554-3988  
800-874-9314  
(voice or TTY)  
have a question or problem  
need a part or an accessory  
need special assistance due to  
a disability  
* During regular business hours, Central Standard Time; see our website for detailed  
business hours.  
© 2013 Uniden America Corp.  
Ft. Worth, Texas  
Printed in Vietnam  
U01UN565BZZ(0)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED  
Installing Your Phone  
Charge the Baꢂery  
1. Unpack the handset, battery pack, and battery  
cover. If you need to remove the cover, press in on  
the notch and slide the cover down and off.  
2. Line up the battery connector with the jack inside  
the handset; the connector only fits one way.  
3. Push the connector in until it clicks into place; tug gently on the wires to  
make sure the battery is securely connected.  
4. Replace the battery cover and slide it into place.  
5. Use an AC adapter to connect the power jack on the base to a regular  
indoor (120V AC) power outlet.  
6. Place the handset in the base with the display facing forward. If the display  
doesn’t light up, reseat the handset or connect the base to a different outlet.  
# Charge the handset completely (about 15 hours) before using.  
Connect the Telephone Cord  
1. Use the telephone cord to connect the TEL LINE jack on the base to a  
standard telephone wall jack.  
# If the display says Check Tel Line, check the connection between the  
base and the phone jack.  
2. If you are mounting the phone on the wall, place the mounting slots (on  
the rear of the base) over the pins on the wall plate; slide the base down to  
lock it into place.  
Test the Connecꢀon  
Make a quick test call. Pick up the handset and press TaLk/fLash. (Press ENd  
to hang up.)  
x If there’s a lot of noise, check for interference (see p. 13).  
x If you keep hearing a dial tone, change to pulse dialing (see below).  
Changing from Tone to Pulse Dialing  
Your phone uses tone dialing by default. If your phone company uses pulse  
dialing, you need to change your phone’s dial mode.  
1. Press MENu/sELEcT and select Global Setup.  
2. Select Dial Mode then Pulse. You’ll hear a confirmation tone.  
To send DTMF tones during a call (e.g., for an automated response system),  
press to temporarily switch to tone dialing. When you hang up, the phone  
*
automatically returns to pulse dialing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 3  
Geꢁng to Know Your Phone  
Handset  
12-key  
dialpad  
CALLER ID/  
RIGHT  
END  
Earpiece  
MENU/  
SELECT  
MESSAGE/  
MUTE  
Microphone  
CLEAR  
REDIAL/  
PAUSE  
SPEAKER  
Status  
TALK/FLASH  
PHONEBOOK/  
LEFT  
Key (icon)  
What it does  
x In standby: increase the ringer volume.  
x During a call: increase the volume.  
up (  
)
x In any menu or list: move the cursor up one line.  
x In standby: decrease the ringer volume.  
x During a call: decrease the volume.  
x In any menu or list: move the cursor down one line.  
dowN (  
)
x In standby: open the menu.  
MENu/sELEcT  
caLLEr Id/rIghT  
ENd  
x In any menu or list: select the highlighted item.  
x In standby or during a call: open the Caller ID list.  
x In the menu: go to the next screen.  
x During a call: hang up.  
x In any menu or list: exit and go to standby.  
x In standby: access your answering system.  
x During a call: mute the microphone.  
x While the phone is ringing: ignore this call (mute the ringer).  
MEssagE/MuTE  
cLEar  
x During menu operations: delete saved data.  
x In standby: open the redial list.  
x While entering a phone number: insert a 2-second pause.  
rEdIaL/pausE  
x Switch a normal call to the speakerphone (and back).  
spEakEr (  
)
x In standby: start a telephone call (get a dial tone).  
x During a call: switch to a waiting call.  
TaLk/fLash  
x In standby or during a call: open the phonebook.  
x In the menu: go back to the previous screen.  
phoNEbook/LEfT  
(
)
LED  
What it means  
x On: the battery is charging.  
x Blinking: there are new messages.  
sTaTus  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 - English  
Reading the Display  
The icons appear based on what you're doing with the phone.  
Icon  
What it means  
Icon  
What it means  
The ringer is turned off.  
The speakerphone is on.  
You have an answering system  
message.  
You have a voice mail  
message.  
Privacy Mode is on (see p. 9).  
T-coil mode is on (see p. 6).  
The battery is 1) fully charged,  
2) half charged, 3) getting low,  
or 4) empty.  
Enter 1) capital or 2) lower  
case letters.  
[Aa]  
[aA]  
Ans. System  
On/Oꢀ  
Base  
Find  
Delete  
Handset  
Play/Stop  
LCD Display  
FWD  
Charging  
contacts  
Volume  
Up/Down  
REV  
Key (icon)  
What it does  
x In standby: page the handset.  
fINd hs (  
)
aNs oN/off  
x In standby: turn the answering system on or off.  
(
)
dELETE  
x While playing a message: delete this message.  
(
)
x In standby: delete all messages.  
pLay/sTop  
x In standby: start playing messages.  
x While playing a message: stop playing messages.  
x When the phone is ringing: ignore this call (mute the ringer).  
(
)
x While playing a message: skip to the next message.  
fwd  
(
)
x In standby: increase the ringer volume.  
x While playing a message: increase the speaker volume.  
up  
(+)  
x In standby: decrease the ringer volume.  
x While playing a message: decrease the speaker volume.  
x While playing a message: restart the message.  
x In the first 2 seconds of a message: play the previous message.  
dowN  
rEV  
()  
(
)
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 5  
Entering Text on Your Phone  
x Use the 12-key dial pad anytime you want to enter text into your phone (e.g.  
a name in the phonebook).  
x If two letters in a row use the same key, enter the first letter; wait for the  
cursor to move to the next space and enter the second letter.  
To...  
Press...  
move the cursor left  
move the cursor right  
erase the character at the cursor  
erase the entire entry  
enter a blank space  
phoNEbook/LEfT.  
caLLEr Id/rIghT.  
cLEar.  
and hold cLEar.  
#
.
switch between upper and lower case letters  
rotate through the punctuation and symbols  
.
.
*
0
Using the Menu  
MENU/SELECT  
Press  
to  
x If you don't press any keys  
for about thirty seconds, the  
handset exits the menu.  
x During a call, use  
open the menu.  
MENU/SELECT  
the current option.  
Press  
to choose  
Handset Setup  
Ans. Setup  
Press  
Handset Setup  
phoNEbook/LEfT to  
T-coil  
PHONEBOOK/LEFT  
to go back a  
screen  
Setup  
back out of the menu  
without hanging up.  
UP  
Use and  
rotate through the  
options.  
DOWN  
to  
Ringer Tones  
Setup  
OR  
Personal Ring  
END  
press  
to exit  
the menu.  
Handset Setup Menu  
Menu Option What it does  
Reduce noise on hearing aids equipped with a telecoil (T-coil)  
feature. It shortens talk time, so keep your battery fully  
charged.  
T-coil  
Choose the handset's ring tone. As you highlight each ring  
Ringer Tones  
AutoTalk  
tone, you hear a sample. To confirm, press MENu/sELEcT.  
Have the handset answer a call when you pick it up from the  
cradle (without pressing any buttons).  
Any Key  
Answer  
Have the handset answer a call when you press any key on the  
12-key dialpad.  
Banner  
Handset  
Language  
Change the name used on the handset’s display.  
Change the display language.  
#
You must change the display language on each handset individually.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 - English  
Menu Option What it does  
Key Touch  
Tone  
Have the keypad sound a tone when you press a key.  
Answering Setup Menu  
Refer to p. 9 for details on setting up your answering system.  
Date & Time Menu  
Use this menu to set the clock (if you have Caller ID, the phone sets date and time  
automatically). Enter the date and time; select AM or PM. Use caLLEr Id/rIghT  
to move the cursor past a digit without changing it. To confirm, press MENu/  
sELEcT.  
Global Setup Menu  
The settings on this menu affect the handset.  
Menu Option  
What it does  
Dial Mode  
Choose tone or pulse dialing (see p. 3).  
Set Line Mode Do not change it unless instructed to by customer service.  
VMWI Reset Reset the Visual Message Waiting Indicator (see p. 10).  
USING YOUR PHONE  
Basics  
To...  
Using the earpiece  
Using the speakerphone  
press spEakEr.  
make a call, dial the number, and press TaLk/fLash.  
answer a call  
press TaLk/fLash.  
press spEakEr.  
hang up  
press ENd or put the handset in the cradle.  
ignore a call/mute the ringer  
press MEssagE/MuTE while the phone is ringing.  
switch to the speaker and back press spEakEr.  
mute the microphone during  
a call  
Press MEssagE/MuTE.  
Press again to turn the microphone back on.  
* After 5 minutes on hold, the call will be disconnected.  
Changing the Volume  
You can adjust the handset’s volume. Press up or dowN to increase or decrease  
the earpiece or speaker volume when you are using them. You can adjust the  
ringer volume when the phone is in standby; to turn off the ringer, turn the  
ringer volume all the way down.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 7  
Finding the Handset  
With the phone in standby, press fINd on the base. The handsets beeps for 1  
minute. To cancel, press fINd again or press a handset key.  
Using the Phonebook, Caller ID, and Redial Lists  
x The phone can store up to 70 entries in its phonebook.  
x If you subscribe to Caller ID (CID) service, the phone stores the information  
for the last 30 received calls to the CID list. Contact your telephone provider  
for more information.  
x The handset remembers the last 5 numbers you dialed on it.  
To...  
Press...  
phoNEbook/LEfT, caLLEr Id/rIghT, or  
rEdIaL/pausE.  
open the list  
scroll through the list  
up or dowN.  
dial the current entry  
TaLk/fLash or spEakEr.  
add 1 at the front of CID number  
before dialing for a toll call.  
*
store the current CID or redial  
entry to the phonebook  
MENu/sELEcT, then select Store Into Pb.  
Edit the name and number as needed.  
edit the current phonebook entry  
delete the current entry  
close the list  
MENu/sELEcT, then select Edit.  
MENu/sELEcT, then select Delete (or  
Delete Entry). To confirm, select Yes.  
phoNEbook/LEfT.  
# When it’s in standby, the handset shows how many calls came in  
since the last time you checked the CID list.  
Adding Phonebook Entries  
With the phone in standby, open the phonebook. Press MENu/sELEcT and then  
select Create New. Proceed to enter a name and number.  
x Enter the phone number (up to 20 digits) exactly as you would dial it.  
x If you need to enter a pause between the numbers, press rEdIaL/pausE; you’ll  
see a P in the display. (The dialing will pause for about 2 seconds per a digit.)  
x To edit the number, press cLEar to back up the cursor and delete numbers.  
Re-enter the correct numbers.  
Deleꢀng All the Entries  
With the phone in standby, open the list (phonebook, CID, or redial). Press MENu/  
sELEcT and then select Delete All. To confirm, select Yes.  
Chain Dialing  
If you often have to enter a series of digits or a code number during a call,  
you can save that code number as a regular phonebook entry and use the  
phonebook to send the code number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 - English  
Make a call normally. When you hear the prompt that asks you to enter your  
number, open the phonebook and find the entry. Press MENu/sELEcT to send  
the code. If you change your mind, just close the phonebook.  
Using Call Waiꢀng  
x Call Waiting, a service available from your telephone provider, lets you  
receive calls while you are on another call. Caller ID on Call Waiting  
(CIDCW) service displays Caller ID information for a waiting call.  
x If you get a Call Waiting call, the phone sounds a tone. Press TaLk/fLash to  
switch between the current call and the waiting call; each time you switch,  
there is a short pause before you’re connected to the other caller.  
Using a Voice Mail Service  
x If you subscribe to a voice mail service, your phone can notify you when  
you have a new message waiting. This feature supports Frequency-Shift  
Keying (FSK) message notification. Contact your voice mail provider for  
more information.  
x When you have new messages, the sTaTus LED on the handset blinks, and  
the display shows a message icon.  
x After you listen to your messages, the voice message icon turns off. If it  
doesn’t, you can reset it. With the phone in standby, open the menu and  
select Global Setup; select VMWI Reset, then select Yes.  
USING THE ANSWERING SYSTEM  
Answering System Opꢀons (Answering Setup  
)
You can set or change the answering system options from the handset. Just  
open the menu and select Answering Setup. Select one of the following:  
Menu Option  
What it does  
Enter a 2-digit PIN so you can access your answering system  
from any touch-tone phone (see p. 11).  
Security Code  
Set the number of rings (2, 4, or 6) before the system  
answers (see p. 12 about Toll Saver).  
Ring Time  
Set the amount of time (1 or 4 minutes) callers have to leave  
a message. The system records up to 12 minutes 30 seconds  
of messages. Choose Announce Only if you don't want the  
system to let callers to leave a message.  
Record Time  
Have the base beep every 15 seconds when you have a new  
message. The alert stops after you listen to all your new  
messages or if you press any key on the base.  
Message Alert  
Ans. Language  
Call Screen  
Change the language of the system's voice prompts.  
Turn on the call screen feature on the base (see p. 11).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 9  
Menu Option  
What it does  
Ans. On/Off  
Turn your answering system on or off.  
Record Greeting Record an outgoing message or greeting (see below).  
Greeting Options Switch greetings or delete your greeting (see below).  
Personalizing the Greeꢀng  
Your personal outgoing message or greeting can be from 2 to 30 seconds long.  
If you don’t record a greeting, the system uses a pre-recorded greeting: Hello,  
no one is available to take your call. Please leave a message after the tone.  
With the phone in standby, open the menu. Select Answering Setup and  
perform a procedure from the following table.  
To...  
Follow these steps:  
1. Select Record Greeting. and press MENu/sELEcT.  
2. Wait until the system says "Record greeting," then you  
can start recording. Press MENu/sELEcT to stop recording.  
3. The system plays back your new greeting. To keep  
the greeting, press ENd. To re-record it, wait until the  
playback ends and press MENu/sELEcT.  
Record a  
personal  
greeting  
Select Greeting Options/Playback Greeting. The system  
plays back the current greeting. Press MENu/sELEcT to switch  
greetings.  
Switch between  
greetings  
1. Select Greeting Options/Playback Greeting.  
Delete your  
greeting  
2. The system plays back your outgoing greeting. After at  
least 2 seconds, press cLEar to delete it.  
Accessing the Answering System  
MESSAGE/MUTE  
mote operation mode.  
Press  
to start  
When the phone is in standby,  
you can access the system from  
CID/RIGHT  
Use  
go to the next  
option:  
to  
PHONEBOOK/LEFT  
Use  
to go back to the  
4:Delete  
/select]  
the handset:  
[
/
previous option:  
x The handset display shows the  
number of messages.  
x The system beeps so you  
know it's waiting for your next  
command.  
3:Skip  
5:Stop  
MENU/SELECT  
2:Play  
Press  
to choose the  
current option  
OR  
1:Repeat  
END  
to exit remote  
operation mode.  
x You can press the number key  
shown next to each command  
instead of scrolling through the screens.  
x If you do nothing for 30 seconds, the phone returns to standby.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 - English  
Geꢁng Your Message  
When you have new messages (that you have not listened to yet), only the  
new messages will be played. To play old messages, completely play all new  
messages first, and then start message playback again.  
To...  
From the base  
From the handset  
play new messages  
Press pLay/sTop.  
Press MEssagE/MuTE.  
Wait at least 5 seconds after starting this message,  
press rEV. select 1:Repeat.  
Within 2 seconds after starting a message,  
restart this message  
replay an earlier  
message  
skip a message  
press rEV.  
select 1:Repeat.  
Select 3:Skip.  
Press fwd.  
delete this message  
Press dELETE.  
Select 4:Delete.  
After the system plays all new messages,  
play old messages  
press pLay/sTop again.  
Press pLay/sTop.  
select 2:Play.  
stop playback  
Select 5:Stop.  
Deleꢀng All Messages  
With the phone in standby, press dELETE; press dELETE again to confirm.  
Screening Your Calls  
While the system takes a message, you can listen on the base speaker (if you  
turn on Call Screen) or from the handset.  
To...  
From the base  
From the handset  
Press MEssagE/MuTE.  
Press TaLk/fLash.  
hear the caller leaving a Listen to the caller  
message  
answer the call  
over the speaker.  
NA  
mute the call screen  
without answering*  
Press ENd or return the  
handset to the cradle.  
Press pLay/sTop.  
* If you mute the call screen, the system continues taking the message: it just stops  
playing through the speaker.  
Using the System While You’re Away from Home  
You can dial in to your answering system from any touch-tone phone. Before  
you can use this feature, you must program a security code.  
Programming a Security Code  
With the phone in standby, open the menu; select Answering Setup, then select  
Security Code. Use the number keypad to enter a two-digit security code (01 to  
99). Press MENu/sELEcT when you’re finished.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 11  
# Remember to make a note of your new security code!  
Dialing In to Your System  
1. Call your phone number from any touch-tone phone, and wait until the  
system answers.  
x If you have the Ring Time set to Toll Saver, the system answers after 2  
rings if you have new messages and 4 rings if you don’t. You can hang  
up during the third ring.  
x If the system is turned off, it answers after 10 rings and beeps sound.  
2. During the greeting or beeps, press  
0
and  
01 Repeat message  
02 Play message  
03 Skip message  
immediately enter your security code. If you  
enter it incorrectly 3 times, the system hangs  
up and returns to standby.  
3. The system announces the time, the number  
of messages in memory, and a help prompt.  
It beeps to let you know it’s waiting for a  
command; enter a 2-digit command from the  
chart.  
# If you don’t press any keys for 15 seconds,  
the system hangs up and return to  
standby.  
04 Delete message  
05 Stop playback  
06 Turn the system on  
09 Turn the system off  
10 Hear help prompts  
IMPORTANT INFORMATION  
Troubleshooꢀng  
General problems  
Possible solutions  
x Check the telephone cord connection.  
I can’t make or receive x Disconnect the base AC adapter. Wait a few  
calls.  
minutes, then reconnect it.  
x Make sure the base is plugged in.  
The handset won’t ring. x Make sure the ringer is turned on.  
x Charge the battery for 15-20 hours.  
x Check the battery connection.  
The handset is not  
working.  
x Let calls ring twice before answering.  
x Make sure your CID service is active.  
The handset won’t  
display CID information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 - English  
Audio issues  
Possible solutions  
x The battery is getting low. Check the handset for a low  
battery alert. Finish your conversation and return the  
handset to the cradle as soon as possible.  
I hear a beeping  
during a call.  
x Check for interference from appliances (microwave  
ovens, TVs, etc.) or wireless devices (baby monitors,  
WiFi equipment, etc.). Move the base away from the  
interference source.  
There’s a lot of  
noise or static  
on the line  
x Move the handset closer to the base.  
x If you use a telecoil hearing aid, turn the T-coil on (see p. 6).  
Answering system problems  
Possible solutions  
x Make sure the answering system is on.  
x Make sure the base is plugged in.  
The answering system does not  
work.  
x See if Record Time is set to Announce Only.  
x Delete messages (memory may be full).  
The system won't record  
messages.  
The handset can't access the  
answering system.  
x Make sure the phone is in standby.  
x Make sure call screening is turned on.  
I can’t hear the base speaker.  
Messages are incomplete.  
x Change the base speaker volume.  
x Increase the Record Time.  
x Delete messages (memory may be full).  
The system keeps recording  
when I answer on an extension.  
x You may have to change the line mode.  
Contact Customer Service for instructions.  
Installing a Line Filter or DSL Filter  
x A telephone line filter or DSL filter prevents services that use the phone line  
from causing interference on your phone. To get a line filter, contact your  
service provider or look in an electronics store.  
x Plug the filter into the telephone wall jack and plug the base into the filter.  
Make a test call to make sure the noise is gone.  
Liquid Damage  
CAUTION: If the base is covered in liquid, disconnect the adapter and  
phone cord from the wall before touching it.  
If the liquid is only on the exterior housing of the base or handset, wipe it off  
and use as normal. If you can hear liquid inside the housing:  
1. Remove all compartment covers, and disconnect all cables and cords.  
2. If liquid is leaking from any vent or hole, turn the phone so that vent faces  
down. If not, place the largest vent face down.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 13  
manual. Using another charger may  
damage the battery or cause it to explode.  
x As part of our commitment to protecting  
our environment and  
3. Let dry for at least 3 days. Check  
for liquid inside the phone before  
replacing compartment covers  
and reconnecting cords.  
conserving natural  
resources, Uniden  
Adapter and Baꢂery Informaꢀon  
voluntarily participates in  
an RBRC® industry  
AC adapter  
Base  
program to collect and  
Part number  
Input voltage  
Output voltage  
PS-0035  
120V AC, 60 Hz  
8V AC @ 300mA  
recycle used Ni-MH  
batteries within the United States. Please  
call 1-800-8-BATTERY for information on  
Ni-MH battery recycling in your area.  
(RBRC® is a registered trademark of the  
Rechargeable Battery Recycling  
Corporation.)  
Battery pack (with normal use)  
Part number BT-1021  
Rechargeable batteries must be recycled  
Capacity  
Talk time  
Standby time about 6 days  
Battery life about 1 year  
300mAh, 2.4V DC  
about 7 hours  
or disposed of properly.  
Warning! The cords on this product and/  
or accessories contain lead, a chemical  
known to the state of California to cause  
birth defects or other reproductive  
harm. Wash hands after handling.  
Uniden works to reduce lead content in  
PVC coated cords in our products and  
accessories.  
x Use only the supplied AC adapters.  
x Use the proper adapter for the base.  
x Do not place the unit in direct  
sunlight or subject it to high  
temperatures.  
x Replace the battery when the talk  
or standby time becomes noticeably  
reduced. For replacements, call the  
Parts Department (see the front  
cover).  
Compliance Informaꢀon  
FCC Part 68 Informaꢀon  
This equipment complies with Part 68  
of the FCC rules and the requirements  
adopted by the ACTA. On the bottom  
of this equipment is a label that  
x When the battery gets low, the  
handset beeps or shows a low  
battery alert; put the handset in the  
cradle for recharging.  
contains, among other information,  
a product identifier in the format US:  
AAAEQ##TXXXX. If requested, this  
number must be provided to the phone  
company.  
An applicable Universal Service Order  
Codes (USOC) certification for the jacks  
used in this equipment is provided (i.e.,  
RJ11C) in the packaging with each piece  
of approved terminal equipment. A plug  
and jack used to connect this equipment to  
the premises wiring and telephone network  
must comply with the applicable FCC  
Part 68 rules and requirements adopted by  
the ACTA. A compliant telephone cord  
and modular plug is provided with this  
product. It is designed to be connected  
Rechargeable Baꢂery Warning  
x This equipment contains a rechargeable  
Nickel-Metal-Hydride (Ni-MH) battery.  
x Nickel is a chemical known to the state of  
California to cause cancer.  
x Do not short-circuit the battery.  
x The batteries in this equipment may  
explode if disposed of in a fire.  
x Do not charge the batteries in any charger  
other than the one specified in the owner’s  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 - English  
to a compatible modular jack that is also  
compliant. See installation instructions for  
details.  
If your home has wired alarm equipment  
connected to a phone line, be sure that  
installing the system does not disable your  
alarm equipment. If you have questions  
about what will disable alarm equipment,  
contact your telephone company or a  
qualified installer.  
Any changes or modifications to this  
product not expressly approved by the  
manufacturer or other party responsible for  
compliance could void your authority to  
operate this product.  
NOTICE: According to telephone  
company reports, AC electrical surges,  
typically resulting from lightning strikes,  
are very destructive to telephone equipment  
connected to AC power sources. To  
minimize damage from these types of  
surges, a surge arrestor is recommended.  
The REN is used to determine the number  
of devices that may be connected to a  
phone line. Excessive RENs on a phone  
line may result in devices not ringing in  
response to an incoming call. In most but  
not all areas, the sum of RENs should  
not exceed five (5.0). To be certain of the  
number of devices that may be connected  
to a line, as determined by the total  
RENs, contact the telephone provider.  
The REN for this product is part of the  
product identifier that has the format  
US:AAAEQ##TXXXX. The digits  
represented by ## are the REN without a  
decimal point (e.g., 03 is a REN of 0.3).  
If this equipment causes harm to the  
telephone network, the telephone company  
will notify you in advance that temporary  
discontinuance of service may be required.  
But if advance notice isn't practical,  
the telephone company will notify the  
customer as soon as possible. Also, you  
will be advised of your right to file a  
complaint with the FCC if you believe it  
is necessary. The telephone company may  
make changes in its facilities, equipment,  
operations or procedures that could affect  
the operation of the equipment. If this  
happens the telephone company will  
provide advance notice in order for you to  
make necessary modifications to maintain  
uninterrupted service.  
FCC Part 15 Informaꢀon  
This device complies with part 15 of the  
FCC rules. Operation is subject to the  
following two conditions: (1) This device  
may not cause harmful interference, and (2)  
This device must accept any interference  
received, including interference that may  
cause undesired operation. Privacy of  
communications may not be ensured when  
using this phone.  
FCC PART 15.105(b): Note: This  
equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC  
Rules. These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses and can  
radiate radio frequency energy and, if  
not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does cause  
harmful interference to radio or television  
reception, which can be determined  
by turning the equipment off and on,  
the user is encouraged to try to correct  
the interference by one or more of the  
following measures:  
Please follow instructions for repairing,  
if any (e.g. battery replacement section);  
otherwise do not substitute or repair any  
parts of the device except as specified in  
this manual. Connection to party line  
service is subject to state tariffs. Contact  
the state public utility commission,  
public service commission or corporation  
commission for information. This  
equipment is hearing aid compatible.  
If you experience trouble with this  
equipment, contact the manufacturer or  
an authorized agent. If the equipment is  
causing harm to the telephone network, the  
telephone company may request that you  
disconnect the equipment until the problem  
is resolved.  
x Reorient or relocate the receiving antenna.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 15  
x Increase the separation between the  
equipment and receiver.  
x Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
x Consult the dealer or an experienced radio/  
TV technician for help.  
3. After about 5 seconds, a confirmation  
tone sounds, indication all functions  
except charging are disabled.  
To return to normal operation, cycle  
the power for the base and remove and  
reinstall the handset battery.  
Industry Canada (I.C.) Noꢀce  
Terminal equipment  
RF Exposure Informaꢀon  
This product complies with FCC radiation  
exposure limits under the following  
conditions:  
NOTICE: This equipment meets the  
applicable Industry Canada Terminal  
Equipment Technical Specifications. This  
is confirmed by the registration number.  
The abbreviation IC before the registration  
number signifies that registration was  
performed based on a Declaration of  
Conformity indicating that Industry Canada  
technical specifications were met. It does  
not imply that Industry Canada approved  
the equipment.  
x The base must be placed to allow a  
minimum of 20 cm (8 inches) between the  
antenna and all persons during normal  
operation.  
x The base must not be collocated or operated  
in conjunction with any other antenna or  
transmitter.  
x The handset is designed for body-worn  
operation and meets FCC RF exposure  
guidelines when used with any belt clip,  
carrying case, or other accessory supplied  
with this product. (All necessary accessories  
are included in the package; any additional  
or optional accessories are not required  
for compliance with the guidelines.) Third  
party accessories (unless approved by the  
manufacturer) should be avoided as these  
might not comply with FCC RF exposure  
guidelines.  
NOTICE: The Ringer Equivalence Number  
(REN) for this terminal equipment is  
marked on the equipment itself. The REN  
assigned to each terminal equipment  
provides an indication of the maximum  
number of terminals allowed to be  
connected to a telephone interface. The  
termination on an interface may consist of  
any combination of devices subject only to  
the requirement that the sum of the Ringer  
Equivalence Numbers of all the devices  
does not exceed 5.  
Disable All Funcꢀons Except  
Charging  
Radio equipment  
The term IC before the radio certification  
number only signifies that Industry Canada  
technical specifications were met. Operation  
is subject to the following two conditions:  
(1) this device may not cause interference,  
and (2) this device must accept any  
interference, including interference that may  
cause undesired operation of the device.  
"Privacy of communications may not be  
ensured when using this telephone."  
D1481/D1483 Base  
1. Press and hold skIp and VoL +  
simultaneously, then plug in the AC  
adapter.  
2. Continue to hold the keys for about 5  
seconds. When the message counter  
turns off, all functions are disabled  
except for charging.  
D1481/D1483 Handset  
Warranty (1 Year, Limited)  
1. Install the battery.  
2. When the “Welcome, please wait...”  
message disappears from the display,  
Evidence of original purchase is required  
for warranty service.  
press and hold ENd, MENu, and  
*
WARRANTOR: UNIDEN AMERICA  
CORPORATION ("Uniden")  
simultaneously.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 - English  
ELEMENTS OF WARRANTY: Uniden  
warrants, for one year, to the original retail  
owner, this Uniden Product to be free from  
defects in materials and craftsmanship with  
only the limitations or exclusions set out  
below.  
INCIDENTAL OR CONSEQUENTIAL  
DAMAGES. Some states do not allow  
this exclusion or limitation of incidental  
or consequential damages so the above  
limitation or exclusion may not apply to  
you.  
WARRANTY DURATION: This warranty LEGAL REMEDIES: This warranty gives  
to the original user shall terminate and  
be of no further effect 12 months after the  
date of original retail sale. The warranty  
is invalid if the Product is (A) damaged or  
not maintained as reasonable or necessary,  
(B) modified, altered, or used as part of  
any conversion kits, subassemblies, or  
any configurations not sold by Uniden,  
(C) improperly installed, (D) serviced  
or repaired by someone other than an  
authorized Uniden service center for a  
defect or malfunction covered by this  
warranty, (E) used in any conjunction  
with equipment or parts or as part of any  
system not manufactured by Uniden, or (F)  
installed or programmed by anyone other  
than as detailed by the owner's manual for  
this product.  
you specific legal rights, and you may also  
have other rights which vary from state  
to state. This warranty is void outside the  
United States of America and Canada.  
PROCEDURE FOR OBTAINING  
PERFORMANCE OF WARRANTY:  
If, after following the instructions in the  
owner's manual you are certain that the  
Product is defective, pack the Product  
carefully (preferably in its original  
packaging). Disconnect the battery from the  
Product and separately secure the battery  
in its own separate packaging within the  
shipping carton. The Product should include  
all parts and accessories originally packaged  
with the Product. Include evidence of  
original purchase and a note describing the  
defect that has caused you to return it. The  
STATEMENT OF REMEDY: In the event Product should be shipped freight prepaid,  
that the product does not conform to this  
warranty at any time while this warranty is  
in effect, warrantor will either, at its option,  
repair or replace the defective unit and  
return it to you without charge for parts,  
service, or any other cost (except shipping  
and handling) incurred by warrantor or  
its representatives in connection with the  
performance of this warranty. Warrantor,  
at its option, may replace the unit with a  
new or refurbished unit. THE LIMITED  
WARRANTY SET FORTH ABOVE IS  
THE SOLE AND ENTIRE WARRANTY  
PERTAINING TO THE PRODUCT  
AND IS IN LIEU OF AND EXCLUDES  
ALL OTHER WARRANTIES OF  
by traceable means, to warrantor at:  
Uniden America Service  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
As an Energy Star®  
Partner, Uniden has  
determined that this  
product meets the  
Energy Star® guidelines  
for energy efficiency.  
Energy Star® is a U.S.  
registered mark.  
x Uniden® is a registered trademark of Uniden  
America Corporation.  
x The pictures in this manual are for example  
only. Your phone may not look exactly like  
the pictures.  
ANY NATURE WHATSOEVER,  
WHETHER EXPRESS, IMPLIED OR  
ARISING BY OPERATION OF LAW,  
INCLUDING, BUT NOT LIMITED  
TO ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE.  
THIS WARRANTY DOES NOT  
COVER OR PROVIDE FOR THE  
REIMBURSEMENT OR PAYMENT OF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 - English  

TDK Network Card LI 2000 3816 User Manual
Techno Source Handheld Game System 20765 User Manual
Telex Video Game Headset PH 81 User Manual
Toastmaster Hot Beverage Maker WST4015ZE User Manual
Toshiba Computer Drive E300 User Manual
Toshiba CRT Television 27AF43 User Manual
Tripp Lite Power Supply 5KVA 6KVA User Manual
Tunturi Home Gym E85S User Manual
Uniden Cordless Telephone D2280 User Manual
VistaQuest Digital Camera VQ 5010 User Manual