Uniden Cell Phone DMX 778 Series User Manual

DMX 778  
SERIES  
OWNER'S  
MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Welcome/Features/Terminology  
Controls & Functions  
3
5
7
7
From the Handset Speakerphone  
33  
33  
34  
Receiving a call/AutoTalk set to OFF  
Hanging Up  
Setting up the Phone  
Choose the best location  
Connect the base unit and  
charge the handset  
Expanding Your Phone  
Four Handset Expandability  
Backwards/Forwards Compatibility  
Switching to the Handset Speakerphone  
During a Call  
Moving out of range  
Call Waiting  
Placing a Call on Hold  
Conferencing  
34  
34  
35  
36  
36  
37  
8
9
9
9
Connect the expansion handset's charger 10  
Redialing Calls  
Adjusting the Ringer, Earpiece and Speaker 38  
Register the Handset  
Register the DCX770 expansion handset to  
main base  
11  
Using the Handset Volume Setting Menu  
Mute the Handset and Base Ringer  
Mute the Handset Microphone  
Tone Dialing Switch-over  
Clarity Booster  
39  
41  
41  
41  
42  
43  
44  
46  
46  
12  
13  
14  
14  
15  
15  
16  
17  
19  
20  
21  
21  
23  
26  
32  
32  
Changing the Digital Security Code  
Installing the Holster  
Optional Headset Installation  
Using the Interface  
Display Icons  
Soft Key Function  
Using the joystick  
Entering text  
Main Menu Options  
Setup Menu  
Handset Setup  
Global Setup  
Find Handset  
Calendar & Scheduler  
Using the Phonebook  
Creating and Editing Phonebook Entries  
Storing Caller ID or Redial Numbers in the  
Phonebook  
51  
51  
53  
53  
54  
54  
55  
Managing the Phonebook  
Checking the number of stored entries  
Changing the sorting order  
Naming phonebook groups  
Making Calls with the Phonebook  
Caller ID Features  
Customize Handset  
Using Your Phone  
Making Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 1 ]  
w w w . u n i d e n . c o m  
Using the Caller ID List  
Deleting Caller ID numbers  
Answering Machine  
55  
56  
57  
57  
58  
61  
62  
64  
64  
65  
67  
67  
71  
72  
73  
74  
75  
75  
75  
75  
76  
77  
78  
79  
79  
79  
80  
83  
Liquid Damage  
Precautions & Warranty  
I.C. Notice  
84  
85  
87  
88  
92  
Features  
Index  
Setting Up the Answering Machine  
Setting Your Outgoing Greeting  
Using the Answering Machine  
Recording a phone conversation  
Screening Calls  
Remote Operation  
Multi-Handset Features  
Text Message  
Using DirectLink Mode  
Room/Baby Monitor  
Intercom  
Transferring a Call  
Note on Power Sources  
Power Failure  
Remote Operation Card  
Battery replacement and handling  
Warning  
Installing a Replacement Battery  
Low battery alert  
Cleaning the battery charging contacts  
General Information  
AC Adapter Information  
Battery Information  
Troubleshooting  
System Reset  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
[ 2 ]  
Thank you for purchasing a Uniden Multi-Handset phone. This  
phone offers four-handset expandability, recordable ringer  
tones, and customizable handset displays.  
Welcome  
Features  
Note: Illustrations in this manual are used for explanation  
purposes. Some illustrations in this manual may  
differ from the actual unit.  
As an Energy Star Partner, Uniden has determined that this  
product or product models meets the Energy Star  
guidelines for energy efficiency.  
Energy Star is a U.S. registered mark.  
• 2.4GHz Frequency Hopping Spread Spectrum  
• Integrated Answering Device  
• Caller ID/Call Waiting Deluxe Options  
• Backward/Forward Compatibility  
• Hands-Free Speakerphone  
• 100 Phone Book Locations  
• Recordable Ringer Tones  
• Distinctive Caller ID Options  
• Animations & Wall Paper Themes  
• Text Messaging  
• Reminder/Calendar  
• Access Answering Machine using Handset  
• Battery Level Indicator  
• Direct Link Mode  
• Room Monitoring  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 3 ] W e l c o m e / F e a t u r e s / T e r m i n o l o g y  
w w w . u n i d e n . c o m  
Uniden is a registered trademark of Uniden America Corporation. AutoTalk,  
AutoStandby, DirectLink, IntegriSound and Random Code are trademarks of Uniden  
America.  
Terminology  
Standby Mode - The handset maybe sitting on or off the cradle, but is NOT in  
use. /flash or  
present.  
key has not been pressed. No dial tone is  
Talk Mode -  
The handset is not in the cradle, and /flash or  
pressed and enabling a dial tone.  
key has been  
Download from Www.Somanuals.com. All Manuals Search And Download.  
W e l c o m e / F e a t u r e s / T e r m i n o l o g y [ 4 ]  
w w w . u n i d e n . c o m  
Controls & Functions  
4
1.Handset Antenna  
1
2.Speakerphone Speaker and Ringer  
3.Handset Battery Compartment  
4.Headset Jack Cover  
5.New Message LED  
5
6.LCD Display  
11  
12  
7.Soft Menu Keys (P.16)  
8. (talk)/flash (P. 32 & 35)  
9.hold/x’fr/int’com (Hold/Transfer/  
Intercom)  
6
2
7
13  
14  
15  
8
9
(P. 36 & 73)  
10. /tone (P. 41 & 56)  
*
11.handset Earpiece  
3
12.Joystick (Navigates PhoneBook, Caller  
ID, Redial, Ringer Volumes and Menu  
Display Options)(p. 17)  
10  
16  
17  
13. (end call)(P. 34)  
14. (speaker phone) (P. 34)  
15.Handset Microphone  
16.# (P. 56)  
17.Handset Charging Contacts  
Remote Answering Machine Operation  
Play  
Repeat  
Skip  
Delete  
Stop  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 5 ] C o n t r o l s & F u n c t i o n s  
w w w . u n i d e n . c o m  
19  
30  
29  
18  
20  
21  
27  
28  
22 23 24 25 26  
18. Base Speaker  
25. find hs (Find Lost Handset/  
Pager)/ (skip)  
19. Base antenna  
20. Base Charge Contacts  
21. Message Counter  
22. vol (volume)/ (ring)/  
(speaker) (p.38)  
(p.43 & 63)  
26.  
(delete)(p.63)  
27. Handset Charge LED  
28. Handset In Use LED  
29. TEL LINE Jack  
23.  
24.  
(play/stop) (p.63)  
(repeat)(p.63)  
30. DC IN 9V Jack  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
C o n t r o l s & F u n c t i o n s [ 6 ]  
Setting up the Phone  
note  
Choose the best location  
When choosing a location for your new phone, here are some  
important guidelines you should consider:  
If your home has  
specially wired alarm  
equipment connected to  
phone line, be sure that  
installing the system  
does not disable your  
alarm equipment.  
If you have questions  
about what will disable  
alarm equipment,  
contact your telephone  
company or a qualified  
installer.  
• The location should be close to both a phone jack and a continuous  
power outlet (one which is not connected to a switch).  
• The base and handset should be kept away from sources of electrical  
noise such as motors, Microwave ovens, and fluorescent lighting.  
• For better reception, place the base as high as possible.  
• The base should be placed in an open area for optimum range and  
reception.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 7 ] S e t t i n g u p t h e P h o n e  
w w w . u n i d e n . c o m  
   
Connect the base unit and charge the handset  
1) Connect the AC adapter to  
the DC IN 9V jack and to a  
standard 120V AC wall  
outlet.  
note  
Use only the supplied  
AD-830 AC adapter. Do  
not use any other AC  
adapter.  
2) Place the handset in the  
base unit with the keypad  
facing forward.  
•Do not place the power  
cord where it creates a  
trip hazard or where it  
could become chafed and  
create a fire or electrical  
hazard.  
•Don't place the base in  
direct sunlight or subject  
it to high temperatures.  
The battery may not  
charge properly.  
NOTE: The rechargeable  
battery is already installed in your phone.  
3) Make sure that the charge LED illuminates.  
If the LED does not illuminate, check to see that the AC adapter is  
plugged in and the handset makes good contact with the base  
charging contacts.  
4) Charge your handset at least 15-20 hours before plugging into  
the phone line.  
5) Once the handset battery  
pack is fully charged, connect  
the telephone line cords to  
the TEL LINE jack and to a  
telephone outlets.  
If your telephone outlet  
isn't modular, contact  
your telephone company  
for assistance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
S e t t i n g u p t h e P h o n e [ 8 ]  
     
Expanding Your Phone  
Four Handset  
Expandability  
Your phone can support  
a total of four  
handsets. Expansion  
handsets do not need  
to be connected to a  
phone jack. Expansion handsets allow you to use additional  
features such as DirectLink Mode and three-way conference  
calling. Expansion handsets need to be registered to the base  
before they will operate.  
Backwards/Forwards Compatibility  
Your phone is compatible with other Uniden  
2.4GHz Digital Expandable Handsets.  
Compatible models include the DCX640 and  
DCX700. Visit our website for updated model  
listings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 9 ] E x p a n d i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
         
Connect the expansion handset's charger  
The handset is powered by a rechargeable battery pack. The  
battery recharges automatically when the handset is placed in  
the charger.  
note  
1) Connect the AC adapter to the  
DC IN 9V jack and to a standard  
120V AC wall outlet.  
2) Set the charger on a desk or  
tabletop, and place the handset  
in the charger with the keypad  
facing forward.  
3) Make sure that the charge LED  
illuminates.  
If the LED does not illuminate, check to see that the AC adapter is  
plugged in and the handset makes good contact with the base  
charging contacts.  
Use only the supplied  
AD-0005 AC adapter.  
Do not use any other  
AC adapter.  
4) Charge the handset battery pack for at least 15-20 hours before  
using your new cordless telephone for the first time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E x p a n d i n g Y o u r P h o n e [ 1 0 ]  
w w w . u n i d e n . c o m  
 
Register the Handset  
Handsets supplied with the phone are registered to the base by  
the factory. When charged, pre-registered handsets display a  
handset ID number. Handsets that have not been registered  
display Models vary! Charge handset on the base for  
registration or refer to Owner's Manual. When you register an  
extra handset to the base, the handset ID will be assigned.  
Only one handset can be registered at a time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 1 1 ] E x p a n d i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
     
Register the DCX770 expansion handset to  
main base  
1) Before registering the extra  
handset, the battery pack  
MUST be charged for 15-20  
hours.  
2) Place the extra handset in  
the main base unit to begin  
registration.  
3) While the handset is  
registering, Handset  
note  
Your phone maybe  
compatible with other  
Uniden 2.4Ghz Digital  
Expandable Systems.  
Look for the  
technology icon on  
our boxes or visit our  
website for a list of  
compatible models.  
Registering will appear in  
the LCD. When Registration  
Complete is displayed, the  
handset has been registered  
to the base. If Registration  
Failed appears, please try  
these steps again.  
Register the DCX640 or DCX700 Backward/Forward  
Compatible Handsets to main base  
1) Press and hold the Registration button on the back of the base.  
2) Keep pressing the Registration button on the base until all  
LEDs on main base start to blink.  
3) On the handset, press and hold # until you hear beep.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
E x p a n d i n g Y o u r P h o n e [ 1 2 ]  
 
Changing the Digital Security Code  
The digital security code is an identification code used to  
connect the handset and the base unit. Normally, setting the  
code is not necessary. In the rare situation that you suspect  
another cordless telephone is using the same security code, you  
can change the code. To change the digital security code:  
1. Perform the "System Reset" options ("De-register the Handset" and  
"Replacing the Base Setting") for all the handsets you have (see  
page 83).  
2. Re-register each handset by following the steps on page 11.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 1 3 ] C h a n g i n g t h e D i g i t a l S e c u r i t y C o d e  
w w w . u n i d e n . c o m  
     
Installing the Holster  
note  
- Line up the groove on the back of the handset  
with the groove on the holster. It fits in the  
holster only one way.  
You must remove the  
holster to charge the  
handset.  
- Slide the phone into the holster.  
- Use the spring clip to attach the holster to  
your belt or pocket.  
Optional Headset Installation  
Your phone may be used with an optional  
headset. To use this feature, insert the  
headset plug into the headset jack. Your  
phone is ready for hands-free  
conversations. (Headset may be purchased  
by calling the Uniden Parts Department or visiting the web site.  
See page 75.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I n s t a l l i n g t h e H o l s t e r [ 1 4 ]  
w w w . u n i d e n . c o m  
       
Using the Interface  
Display Icons  
ICON  
DESCRIPTION  
Battery icons indicate the handset battery status. This icon cycles depending on  
the battery status (full, medium, low, and empty).  
Ringer off icon indicates that ringer is turned off.  
Keypad lock icon appears when the keypad is locked.  
Text message icon appear when you have new text messages.  
Mute icon appears when you mute the handset.  
Speaker icon appears when the handset speaker phone is used.  
Booster icon appears when the Clarity Booster feature is in use.  
Privacy icon appears when the Privacy Mode is turned on.  
Call record icon appears while recording a conversation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 1 5 ] U s i n g t h e I n t e r f a c e  
w w w . u n i d e n . c o m  
   
Soft Key Function  
"Soft" keys are keys that change function during the operation of the phone. There  
are two soft keys on the handset.  
The function of each soft key is determined by the text that appears directly above  
it. For example, when the handset is in standby mode, pressing soft key 2 access the  
answering machine remotely. When the handset is in talk mode, pressing soft key 2  
will mute the call. Complete information on the features controlled by the soft keys  
can be found under each feature.  
In standby mode  
In talk mode  
ꢀꢁꢂꢃꢃꢄ#/  
ꢃꢅꢆꢀꢇꢆꢃꢇꢄ/10  
*CPFUGVꢄꢈꢀ  
6CNMꢀꢀꢀꢀꢀꢀꢀꢀꢁꢂꢃꢄ  
ꢃꢅꢆꢇꢄꢈꢉꢊꢋꢁ  
/'07  
/5)  
/'07  
/76'  
Soft key 1  
Soft key 2  
Soft key 1  
Soft key 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U s i n g t h e I n t e r f a c e [ 1 6 ]  
w w w . u n i d e n . c o m  
     
Using the joystick  
The joystick makes it easy to use  
your phone. The four most  
commonly used functions are  
accessible just by moving the  
joystick:  
Adjust the ringer  
View the  
phonebook  
View the  
Caller ID  
Redial a number  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 1 7 ] U s i n g t h e I n t e r f a c e  
w w w . u n i d e n . c o m  
   
You will also use the joystick to make menu selections.  
Highlight the option you want by moving the joystick up,  
down, right, or left. This will move the cursor; the option  
currently highlighted appears in reversed out text:  
1)Press the center of the joystick.  
2)Select the MENU soft Keys.  
To exit the MENU and return to standby, press the key.  
Select the highlighted option by pressing in on the center of  
the joystick. (You can also press the OK soft key.) Anytime  
the display prompts you to press OK or the ENTER soft key,  
you can press the center of the joystick.  
You can go back to the previous menu at any time by pressing  
the BACK soft key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g t h e I n t e r f a c e [ 1 8 ]  
Entering text  
You can use the number keypad on your  
phone to enter text by referring to the  
letters printed on each number key.  
When you press the number key in a text  
entry field, the phone displays the first  
letter printed on the number key. Press  
the number key twice to display the  
second letter and three times to display  
the third. Capital letters are displayed  
first, then lower case letters, then the  
number on the key.  
Num ber of tim es key is pressed  
If two letters in a row use the same  
number key, enter the first letter, then  
use the joystick to move the cursor to  
the next position to enter the second letter.  
For example, to enter Movies:  
1) Press 6 once to enter M.  
2) Use the joystick to move the cursor to the right.  
3) Press 6 six times to enter o.  
4) Press 8 six times to enter v.  
5) Press 4 six times to enter i.  
6) Press 3 five times to enter e.  
7) Press 7 eight times to enter s.  
8) Press the center of the joystick to end your text entry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 1 9 ] U s i n g t h e I n t e r f a c e  
w w w . u n i d e n . c o m  
 
If you make a mistake while entering a name, use the joystick to move  
the cursor to the incorrect character. Press the DELETE soft key to  
erase the incorrect character, and then enter the correct character.  
To delete all characters in the text entry field, press and hold the  
DELETE soft key.  
note  
If you do not press a key  
within 30 seconds, the  
phone will time out and  
exit the menu mode.  
When setting Day and  
Time, the time-out  
Main Menu Options  
Your phone has six main menu  
options: Text Message, Volume  
Setting, Customize Handset, Link  
Handsets, Reminder/Calendar, and  
period is extended to two  
minutes.  
$#%-  
1-  
System Setup.  
Text Message  
Link Handsets  
Reminder/Calendar  
System Setup  
Volume Setting  
Customize Handset  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u O p t i o n s [ 2 0 ]  
w w w . u n i d e n . c o m  
 
Setup Menu  
Handset Setup  
Handset Setup  
The following submenu options must  
be set separately for each handset.  
$#%-  
1-  
Distinctive ID  
You can assign special ringer tones to anyone in your  
Distinctive  
ID  
phonebook. When your phone gets a call, it looks up the Caller  
ID information in your phonebook; if you've assigned a  
distinctive ringer to that number, the phone uses it so you  
know who's calling.  
To turn on distinctive ringing, go to Distinctive ID and select  
On. A confirmation tone tells you that distinctive ringing is  
active.  
AutoTalk  
AutoTalk  
AutoTalk, lets you answer the phone just by picking it up from  
the cradle. To turn on AutoTalk, go to Auto Talk and select On. A  
confirmation tone tells you that AutoTalk is active.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 2 1 ] S e t u p M e n u  
w w w . u n i d e n . c o m  
           
Anykey Answer  
AnyKey Answer lets you answer the phone by pressing any key  
on the number pad. To turn on AnyKey Answer, go to AnyKey  
Answer and select On. A confirmation tone tells you that AnyKey  
Answer is active.  
Handset Setup  
Anykey Answer  
Language  
Language  
You can change the language the menu display will use. Choose  
from English, French, or Spanish. To change the language, go to  
Language and select English, Franais (French), or Espaツol  
(Spanish). You'll hear a confirmation tone, and the display will  
use the selected language.  
Key Touch Tone  
Key Touch Tone is the tone your keypad makes when keys are  
pressed.  
Key Touch  
Tone  
To turn off the tone, go to Key Touch Tone and select Off. A  
confirmation tone tells you that the tone has been deactivated.  
Privacy Mode  
Privacy Mode  
If you have other registered handsets and you don't want them  
to interrupt you on a call, you can turn on privacy mode. As  
long as your handset is in privacy mode, other handsets won't  
be able to join your call or make any calls of their own.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
S e t u p M e n u [ 2 2 ]  
       
To turn on privacy mode, go to Privacy Mode and select On. You  
can turn on privacy mode when the phone is in standby or  
when you're already on a call.  
Handset Setup  
LCD Contrast  
LCD Contrast  
You can change the contrast of your  
handset display to make it easier to  
ꢀꢀꢀꢀ%QPVTCUV  
ꢀꢀꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢂ  
read. You might want to adjust the  
contrast whenever you change the  
display color. Your phone gives you 10  
$#%-  
1-  
levels of contrast to choose from. To adjust the contrast, go to  
Contrast. Move the joystick up to increase the contrast and  
down to decrease the contrast. When you like the level of  
contrast, press the center of joystick to select it.  
Global Setup  
Global settings apply to all registered  
handsets and the base. If you change  
something under the global menu, you  
Global Setup  
$#%-  
1-  
change it for all handsets. Only one handset can change global  
settings at a time, and you have to make sure the phone is not  
currently being used.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 2 3 ] S e t u p M e n u  
w w w . u n i d e n . c o m  
     
Day and Time  
To change the date and time shown  
in the display, go to Date & Time.  
Move the joystick right and left to  
highlight the part you want to  
Global Setup  
Day and Time  
ꢀꢀ &CVGꢀꢁꢀ6KOG  
ꢄꢅꢆꢄꢇꢂꢂꢃ  
ꢅꢂꢈꢇꢉ2/ꢊꢋꢌ#/ꢄ2/ꢍ  
$#%-  
5#8'  
change (date, time, AM/PM). Use the  
number keypad or * to change each  
part. Press the center of the joystick when you're finished.  
Call Waiting  
Your phone supports Caller ID on Call Waiting, so you can see  
the name and number of someone who calls when you're already  
on the line. Your phone also supports Call Waiting Deluxe, which  
gives you a choice of how you want to handle a waiting call.  
You'll need to subscribe to these features with your phone  
company before you can use them.  
Call Waiting  
To let your phone support these  
features, go to Call Waiting. Select  
note  
ꢀꢀ%CNNꢀ9CKVKPI  
1P  
1HH  
On, and the phone will display the Call  
Waiting Deluxe screen. Select On. (You  
$#%-  
1-  
have to turn on Call Waiting before  
you can turn on Call Waiting Deluxe.)  
For setting Day and Time,  
if no key is pressed for  
two minutes, the phone  
will exit the menu mode.  
A confirmation tone tells you that your phone is ready to use  
these features.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t u p M e n u [ 2 4 ]  
w w w . u n i d e n . c o m  
   
Area Code  
If you can make a call by dialing only 7 digits (instead of 10),  
you can program your local area code in your phone. If you get a  
call from within your area code, you'll only see the 7-digit  
phone number. If you get a call from outside your area code,  
you'll see all 10 digits.  
Global Setup  
Area Code  
To enter an area code, go to Area Code. Use the number keypad  
to enter your 3-digit area code. Press the center of joystick  
when you're finished.  
Dial Mode  
Dial Mode  
Your phone can communicate with the telephone network in two  
different ways: tone dialing and pulse dialing. These days, most  
phone networks use a method called tone dialing, so your phone  
comes programmed for tone dialing.  
If your phone company uses pulse dialing, you'll need to change  
your phone's dial mode. There's an easy way to tell: try making a  
call. If your call connects, your phone's setting is fine. If not,  
go to Dial Mode and select Pulse. A confirmation tone tells you  
you've changed the dial mode, and you can try making a call  
again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 2 5 ] S e t u p M e n u  
w w w . u n i d e n . c o m  
   
Customize Handset  
This menu lets you customize your  
handset. You can set these options  
separately for each handset.  
$#%-  
1-  
Ringer Tone  
Ringer Tone  
You can set a different ringer for each handset. This phone  
comes with 10 prerecorded songs and 10 different ringer tones;  
you can also record your own ringer tones (see page 27).  
- Songs: Beethoven's Symphony #9 [Beethoven9], Fur Elise [Elise],  
We Wish You A Merry Christmas [Merry Christmas], Home Sweet  
Home [Home Sweet Home], Lorri Song #6 [Lorri Song], When the  
Irish Eyes Are Smiling [Irish Eyes], Aura Lee, Let Me Call You Sweet  
Heart [Sweetheart], Star Spangled Banner [Star Spangled], Old  
MacDonald [Old MacDonald]  
- Ringer tones: Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep  
Boop, Tone Board, Chip Chop, Party Clap, Reminder  
1) Go to Ringer Tones and highlight  
the ringer you want. (Each ringer  
ꢀꢀ4KPIGTꢀ6QPGU  
4GEQTFGFꢀ4KPIꢀꢀꢁ  
will sound as you highlight it.)  
4GEQTFGFꢀ4KPIꢀꢀꢂ  
$#%-  
2) Press the center of the joystick to  
1-  
select the ringer. You'll hear a  
confirmation tone, and the phone will go back to the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t u p M e n u [ 2 6 ]  
w w w . u n i d e n . c o m  
       
Customize Your Own Distinctive Ringer Tones  
Your phone can store up  
to 20 different recordings  
to use as ringer tones (a  
total of 3 minutes, 15  
seconds). Each recording  
must be between 5 and  
Record Ringer  
60 seconds long.  
To the  
headset jack  
To the  
sound source  
1) Connect the audio recording cable to  
the handset and sound source  
6QꢀUVCTV  
TGEQTFKPIꢀTKPIGT  
RTGUUꢀ=4'%14&?  
(e.g.stereo or cd player). Insert one  
end of the audio recording cable into  
the handset's headset jack and the  
other end into the sound source.  
$#%-  
4'%14&  
You can also simply use the handset's microphone by holding  
the handset close to the sound source.  
2) Go to Record Ringer.  
3) To start recording, press the RECORD soft key. The message  
counter displays 60 and then begins to count down.  
4) When you are finished recording, press the STOP soft key. The  
phone will play the recorded ringer.  
5) To store the ringer, press the Joystick or the SAVE soft key.  
6) Enter the title of this ringer.  
7) Press the center of the joystick key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 2 7 ] S e t u p M e n u  
w w w . u n i d e n . c o m  
   
Delete Ringer  
To delete a ringer tone, go to Delete Ringer and simply select  
the ringer you want to delete. Select Yes. The ringer is deleted  
from the list, and the phone stays on the ringer list.  
Delete Ringer  
Animations  
Animations  
Your phone has 5 different system animations (Dog, Face, Car,  
Frog and Abstract) with 9 different animation schemes  
(example is for Face):  
Ringer Volume Ringer Volume Ringer Volume  
Paging  
Done!  
Off  
Low  
High  
Deleted!  
TALK  
END  
Low battery  
To turn on the animation, go to  
Animations and highlight the  
#PKOCVKQPU  
animation you want. Press the VIEW 0Qꢀ5GNGEVKQP  
&QI  
soft key to see the animation or the  
OK soft key to activate it.  
$#%-  
8+'9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t u p M e n u [ 2 8 ]  
w w w . u n i d e n . c o m  
   
Themes (wallpaper)  
Your phone has 22 different wall papers themes (including  
digital and analog clocks). The wall paper will displays on the  
handset's LCD during standby mode:  
Themes  
Abstract Frame  
Happy B_Day  
Cruisin  
Jogger  
Cycling  
Gone Shopping  
Ollie  
Guitar  
New York  
Pagoda  
Puppy Dog  
Roxie  
Sail Boat  
Smiley Face  
Soccer  
Stiletto  
tunes  
Uniden Logo  
Vacation  
Work Related  
To turn on the wallpaper, go to Themes and highlight the  
wallpaper you want. Press the VIEW soft key to see the  
wallpaper or the SELECT soft key to activate it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 2 9 ] S e t u p M e n u  
w w w . u n i d e n . c o m  
   
Banner  
You can change the name your phone  
displays on the screen. If you have  
Banner  
ꢀꢀꢀꢀꢀ$CPPGT  
more than one handset, you can use /QO Uꢀ2JQPꢀꢀꢁꢂ  
the banner name to identify your  
&'.'6'  
1-  
handset during handset-to-handset  
functions like text messaging,  
intercom and DirectLink.  
Go to Banner and enter the name you want to use. You can use  
up to 10 characters. Use the DELETE soft key to delete an  
existing handset name. Press the center of your joystick when  
you're finished.  
Keypad Lock  
You can lock your keypad so you don't press any keys  
accidentally. You can still answer calls.  
Keypad Lock  
To lock your keypad, go to Keypad Lock and select Lock. You'll  
hear a confirmation tone, and your keypad is locked.  
note  
To unlock the keypad temporally, press any key on the upper  
part of the handset. Keypad Locked! To unlock keypad press *  
The number keypad will  
not be locked.  
key appears. Press tone/ in 20 seconds. Keypad Unlocked! Auto  
*
Lock Enable appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e t u p M e n u [ 3 0 ]  
w w w . u n i d e n . c o m  
   
To release the keypad lock, press any key on the upper part of  
the handset. While the display appears, press the # key. Keypad  
Lock Off appears.  
Backlight Color  
Backlight Color  
You can change the color of your phone's backlighting. There  
are 7 different colors choose from: Ocean, Kiwi, Sunset, Violet,  
Sunflower, Sky, and Polar Ice.  
To change the color of the display's backlight, go to Backlight  
Color and select the color you want. As you scroll through the  
options, the phone displays the highlighted color for you.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 3 1 ] S e t u p M e n u  
w w w . u n i d e n . c o m  
 
Using Your Phone  
note  
Making Calls  
1) Remove the handset from the  
charging cradle.  
2) Slide the keypad open.  
3) Press /flash.  
4) Listen for the dial tone.  
5) Dial the number.  
If the line is already in  
use, all registered  
handsets that are not  
currently in use will  
display "Line In Use."  
OR  
1) Remove the handset from the charging cradle.  
2) Slide the keypad open.  
3) Dial the number.  
If you need the phone to pause before dialing more digits  
(for example, to enter an access code or extension), press  
the PAUSE soft key.  
P
appears in the display, which  
represents a 2-second pause.  
4) Press /flash.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g Y o u r P h o n e [ 3 2 ]  
     
From the Handset Speakerphone  
1) Remove the handset from the charging cradle.  
2) Slide the keypad open.  
note  
3) Press  
(Speaker Phone).  
4) Listen for the dial tone.  
•For best performance,  
use the speaker phone  
in a quiet room and let  
the caller finish  
speaking before you  
speak. If you or the  
other party has  
difficulty hearing,  
adjust the speaker  
volume.  
5) Dial the number.  
6) When the other party answers, talk into the microphone in  
the middle of the handset.  
Receiving a call/AutoTalk set to OFF  
Handset is in the cradle  
Handset is off the cradle  
•To set "Autotalk," see  
page 21 or to set  
"Anykey Answer" see  
page 22.  
1)Remove the handset from the  
charging cradle.  
Press /flash.  
If Any Key Answer is set to  
2)Press /flash.  
On, you can also press any  
If AutoTalk is ON, the phone number key on the keypad  
will automatically answer the to answer a call.  
call when you pick the  
handset up.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 3 3 ] U s i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
         
Hanging Up  
Press or return the handset to the charging cradle.  
Switching to the Handset Speakerphone During a  
Call  
To switch a normal call to the speakerphone, press (speaker  
phone) on the handset. To switch from a speakerphone call to a  
normal call, press (speaker phone).  
Moving out of range  
If you move your handset farther from the base unit during a  
call, you might start to hear more noise than usual. If you go  
too far from the base, you'll hear a beep and see No Signal  
Press Help on the display. The base will stay connected to the  
caller for another 30 seconds, so you can move back within  
range and press /flash or (speaker phone) to return to the  
call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g Y o u r P h o n e [ 3 4 ]  
             
Call Waiting  
If you hear a call waiting tone while you're on a call, press  
/flash to switch to the new call. After a short pause, you'll  
hear the new caller. Press /flash again to go back to the  
original caller.  
note  
You must subscribe  
through your local  
telephone company to  
receive Call Waiting or  
Caller ID on call waiting  
service.  
Call Waiting Deluxe  
If you subscribe to Call Waiting Deluxe (CWDX) from your phone  
company, you have several different options when you get a  
call waiting call. When you hear the call waiting tone, instead  
of answering the call, you can press the center of the joystick  
and then select CWDX. Then, use your joystick or press 1-7 to  
choose from the following options:  
Your phone can't show  
call waiting caller ID  
information when a call  
is on hold.  
1.Ask to Hold - A prerecorded message tells the caller that  
you'll be available shortly, and the call is place on hold.  
2.Tell Busy - A prerecorded message tells the caller you are  
busy, and the waiting call is disconnected.  
3.Forward Call - The caller is sent to your voice mail box, if  
available.  
4.Answer/Drop 1 - Disconnects the first call, and connects to  
the new caller.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 3 5 ] U s i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
     
5.Conference - Starts a conference call with your first and  
second callers.  
6.Drop First/7.Drop Last - During a conference call, allows you  
to choose to drop the first or last caller.  
Placing a Call on Hold  
During a call, press hold/X’fr/  
int’com to put the call on hold. Press  
ꢀꢁꢂꢃꢃꢄ#/  
ꢃꢅꢆꢀꢇꢆꢃꢇꢄ/10  
/flash or  
to go back to the call.  
.KPGꢄ1Pꢄ*QNF  
/'07  
/5)  
If you leave the call on hold for 10  
seconds, the display will change to  
read Line on Hold. After 5 minutes, the call is disconnected.  
Conferencing  
If you have more than one handset, two handsets can talk to  
the outside caller at the same time in a conference call. Once a  
call is in progress, press /flash or to join the call. To hang  
up, press or put the handset back in the cradle. The other  
handset will still be connected after you hang up.  
note  
If the other handset is in  
privacy mode, you won't  
be able to join the call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U s i n g Y o u r P h o n e [ 3 6 ]  
w w w . u n i d e n . c o m  
         
Redialing Calls  
You can quickly redial the last ten  
phone numbers that were dialed from  
this handset.  
note  
•Each redial record can  
store up to 32 digits,  
but your phone only  
displays the first 15  
digits. Digits between  
16 and 32 are still  
there, just not  
With the phone in standby mode,  
slide the joystick down. This brings  
up the redial list. Use the joystick to  
scroll through the numbers, and  
select the number you want to dial.  
Press /flash to dial the selected  
number.  
displayed.  
Redial a number  
To store redial numbers  
in the Phonebook, see  
page 51.  
ꢀꢀꢀꢀꢁ4GFKCN  
ꢂꢃꢂꢄꢂꢃꢂꢄꢂꢃꢂꢃ  
ꢂꢄꢅꢃꢅꢄꢅꢃꢅꢄꢅꢃꢅꢃ  
$#%-  
126+10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 3 7 ] U s i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
   
Deleting Redial Records  
If you want to delete a phone number from the redial list, go to  
the redial list and select the number you want to delete. Press  
the OPTION soft Key, and select Delete Number, and then Yes. If  
you want to delete all the redial records, select Delete All, and  
then Yes.  
Adjusting the Ringer, Earpiece and Speaker  
Adjusting the base ringer volume  
You can choose from four ringer settings on the base: off, low,  
medium, and high. When the phone is in standby mode, press  
vol to cycle through the ringer volume setting. The base plays  
each volume for you.  
Adjusting the base speaker volume  
You can adjust the volume of the answering  
machine speaker while a message is  
playing. Press vol during a message to  
adjust the speaker volume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g Y o u r P h o n e [ 3 8 ]  
         
Using the Handset Volume Setting Menu  
You can adjust the handset audio  
from Volume Setting menu.  
Ringer: Adjust the handset ringer  
$#%-  
1-  
volume  
You can choose from three different  
ringer volume settings on your handset:  
4KPIGTꢀ8QNWOG  
ꢀꢀꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢂ  
ꢀꢀꢀꢀꢀꢀ.QY  
off, low, and high. To adjust the ringer  
volume, go to Ringer and select the  
ringer option you want to use.  
$#%-  
1-  
Ear speaker: Adjust the handset  
earpiece volume  
ꢀꢀ 'CTꢀ5RGCMGT  
You can choose from six volume levels ꢀꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢂ  
ꢀꢀꢀꢀ8QNWOGꢀꢃ  
$#%-  
for the earpiece speaker. To adjust the  
1-  
earpiece volume, go to Ear Speaker  
and select the volume level you want  
to use.  
You can also adjust the earpiece volume during a call by sliding  
the joystick up, and then up (to make it louder) or down (to  
make it softer).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 3 9 ] U s i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
   
Speaker: Adjust the handset speaker volume  
You can choose from six volume levels for  
the handset speakerphone. To adjust the  
speaker volume, go to Speaker and select  
the volume level you want to use.  
Adjust the  
speaker volume  
You can also adjust the handset speaker  
volume during a call by sliding the joystick  
up, and then (to make it louder) or down  
(to make it softer).  
Audio Tone  
If you aren't satisfied with the audio  
quality of your phone, you can adjust  
the Audio Tone of the earpiece. Your  
phone gives you three audio tone  
options: low, mid, or high. Go to  
Audio Tone and select the option that  
sounds best to you.  
*KIJꢀ6QPG  
0CVWTCNꢀ6QPG  
.QYꢀ6QPG  
$#%-  
1-  
(Audio tone adjustments only apply to the earpiece, not the  
speakerphone.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g Y o u r P h o n e [ 4 0 ]  
   
Mute the Handset and Base Ringer  
While the handset is ringing, you can mute the ringer for this  
note  
call by pressing the MUTE soft key. To mute the base ringer  
press  
call.  
on the base. The phone will ring again on the next  
You can only mute the  
handset ringer if the  
handset is off the  
base when the phone  
starts ringing.  
Mute the Handset Microphone  
When you're on the phone, you can press the Mute soft key to  
turn off the microphone so the caller can't hear you. The  
display shows Mute On and while the microphone is muted. To  
turn off muting, press the Mute soft key again.  
Tone Dialing Switch-over  
If your telephone company uses pulse  
dialing, you can switch-over to tone  
dialing after the call connects. This  
feature is useful when you need tone  
dialing to use any automated menu  
systems, such as telephone bank  
tellers, telephone prescription refills,  
customer support menus, etc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 4 1 ] U s i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
             
If your phone is set to pulse dialing mode, make your call  
normally. Once your call connects, press the /tone key. Any  
*
digits you enter from then on will be sent as tone digits. When  
this particular call ends, the phone automatically returns to  
pulse dialing mode.  
Clarity Booster  
If you have interference while you are  
on your phone, you can improve the  
6CNMꢀꢀꢀꢀꢀꢀꢁꢁꢁꢂꢃꢃ  
ꢀꢀꢀ$QQUVGTꢀ1P  
sound quality by turning on the  
clarity booster.  
/'07  
/76'  
While you are on a call, press the center of the joystick and  
then select Clarity Boost. Boost On and appear on the  
display. To turn off the Clarity Booster, repeat above steps  
again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g Y o u r P h o n e [ 4 2 ]  
   
Find Handset  
To locate the handset, press  
note  
find hs/ on the base when the phone is  
in standby mode. All registered handsets  
beep for 60 seconds, and Paging appears on  
the handset display. To cancel paging,  
press any key on the handset or find hs/  
on the base.  
If the battery pack is  
completely drained, the  
handset will not beep.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 4 3 ] U s i n g Y o u r P h o n e  
w w w . u n i d e n . c o m  
     
Calendar & Scheduler  
Your phone has a built-in calendar  
that you can use to schedule  
reminders and appointments (all the  
way through December 31, 2023).  
You can set alarms for up to 30  
different events;  
$#%-  
1-  
Select the Reminder/Calender option to view the calendar. Use  
the joystick to scroll through the calendar.  
Scheduling a reminder  
Go to the Calendar. Press the SKDL  
soft key to show all scheduled  
reminders, and select a reminder.  
Press the OPTION soft key. Select New  
Entry.  
ꢀꢀꢀꢀ5EJGFWNG  
ꢁꢂꢃꢄꢅꢃꢁꢂꢀꢁꢆꢇꢁꢁ#/  
ꢁꢂꢃꢄꢈꢃꢁꢂꢀꢁꢅꢇꢁꢁ2/  
$#%-  
126+10  
1) Press the center of the joystick.  
2) Use the number keypad or to select the date and time of  
*
this reminder. Press the center of the joystick when you're  
finished.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
C a l e n d a r & S c h e d u l e r [ 4 4 ]  
     
3) If you want your phone to ring when this reminder occurs,  
move to the second line. Select the ringer tone you want the  
phone to ring.  
4) Press the center of the joystick.  
5) Select third line to enter a name or reminder text for this  
reminder. Edit Schedule appears. You can enter up to 32  
characters. Press the center of the joystick when you're finished.  
6) When everything is correct, press the DONE soft key.  
Editing and deleting reminders  
You can edit reminders by pressing the SKDL soft key and  
selecting the reminder by pressing the center of the joystick.  
Once the reminders is selected, you can edit the date, time,  
reminder tone, and text the same way you entered them for a  
new entry.  
To delete an reminders, select the reminder and press the  
OPTION soft key. Select Delete entry. To delete all reminders,  
select Delete All.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 4 5 ] C a l e n d a r & S c h e d u l e r  
w w w . u n i d e n . c o m  
Using the Phonebook  
Your phone lets you store up to 100 entries in each handset.  
You can store up to 4 phone numbers for each name in your  
phonebook (for a total of 400 numbers), and you assign names  
to groups for easy searching. You can also store a special ringer  
tone, display, and color to each name or group.  
You can store a distinctive ringer tone, picture display, and  
backlight color to your name or group.  
You can enter your phonebook by  
sliding the joystick to the left.  
View the  
phonebook  
Creating and Editing Phone-  
book Entries  
Go to the phonebook and press the OPTION soft key. Select New  
Entry. Enter as much of the following information as you want.  
Press the center of the joystick to enter each entry and confirm  
the selection. When you're finished, press the DONE soft key to  
save this phonebook entry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g t h e P h o n e b o o k [ 4 6 ]  
   
Step 1: Name  
Select and use the keypad to enter  
the name for this entry. You can  
enter up to 16 characters. If you  
don't want to enter a name, your  
phone will store this entry as <No  
Name>. Press the center of the  
joystick when you're finished, and  
your phone will go back to the  
current phonebook entry.  
,CPGꢀ5OKVJ  
ꢁꢂꢁꢃꢁꢂꢁꢃꢁꢂꢁꢂ  
ꢄꢂꢄꢃꢄꢂꢄꢃꢄꢂꢄꢂ  
ꢅꢂꢅꢃꢅꢂꢅꢃꢅꢂꢅꢂ  
ꢆꢂꢆꢃꢆꢂꢆꢃꢆꢂꢆꢂ  
'NKUG  
)GCTU  
-KYK  
)TQWRꢄ  
5RGGF&KCNꢀꢁꢂ  
$#%-  
&10'  
Step 2: Number  
Select  
and enter a phone number for this entry. If you need  
your phone to pause between digits when it's dialing (for  
example, to enter an extension or an access code), press the  
PAUSE soft key to insert a two-second pause. You'll see a  
P
in  
the display. You can stack more than one pause together if two  
seconds isn't long enough. Each pause counts as one digit; you  
can enter up to 20 digits for the phone number. Press the  
center of the joystick when you're finished, and your phone will  
go back to the current phonebook entry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 4 7 ] U s i n g t h e P h o n e b o o k  
w w w . u n i d e n . c o m  
   
After you enter the number, press the center of the joystick.  
You can select an icon to remind you which number this is:  
home , work , mobile , or general phone number . Press  
the center of the joystick when you're finished.  
note  
You can save up to 4  
numbers for each  
Step 3: Unique Ring  
phonebook entry. If you  
try to save more than 4  
numbers for a phonebook  
entry, your phone will  
display Dial data is full.  
You'll have to delete one  
of the existing numbers  
before you add a new  
one.  
Select to attach a special ring to this phone. Select the  
ringer tone you want the phone to use when this person calls,  
or select No Selection to have the phone use its regular ringer  
tone. Press the center of the joystick when you're finished, and  
your phone will go back to the current phonebook entry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U s i n g t h e P h o n e b o o k [ 4 8 ]  
w w w . u n i d e n . c o m  
 
Step 4: Unique Display  
Select to attach a special screen display to this entry. Select  
the display you want the phone to use when this person calls,  
or select No Selection to have the phone use its regular display.  
You can press the VIEW soft key to see the display choices:  
note  
You can also choice the  
display from the themes.  
Lava lamp  
Fireworks  
Race Car  
Ollie  
Roxie  
Good Doggy  
Sail Boat  
Abstract Geo  
Gears  
Flutter  
Press the center of the joystick when you're finished, and your  
phone will go back to the current phonebook entry.  
Step 5: Unique Color  
Select  
to attach a special screen color to this entry. Select  
the color you want the phone to use when this person calls, or  
select No Selection to have the phone use its regular color. As  
you scroll through the list, you will see the color choices. Press  
the center of the joystick when you're finished, and your phone  
will go back to the current phonebook entry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 4 9 ] U s i n g t h e P h o n e b o o k  
w w w . u n i d e n . c o m  
   
Step 6: Phonebook Group  
Select to place this entry into a phonebook group. Select the  
group (0-9) you want this entry to belong to, or select No  
Selection to leave the entry outside of any group. Press the  
center of the joystick when you're finished, and your phone will  
go back to the current phonebook entry. See page 54 for  
information on creating and editing groups. To select a group,  
see page 54.  
Step 7: Speed Dial  
Select 0-9 to save this number to one of the 10 speed dial  
numbers or No Selection if you don't want to save it to a speed  
dial number. If there's already a phone number saved to the  
speed dial number you select, your phone will ask if you want  
to overwrite the number. Press the center of the joystick when  
you're finished, and your phone will go back to the current  
phonebook entry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g t h e P h o n e b o o k [ 5 0 ]  
   
Storing Caller ID or Redial Numbers in the  
Phonebook  
You can store Caller ID or redial numbers in your phonebook so  
you can use them later. Go to the Caller ID list or redial list and  
select the number you want to store. (If the Caller ID  
information didn't include the number, then you can't store it.)  
Press the OPTION soft key and select Add to Phonebook. Your  
phone will create a phonebook entry so you can enter the  
additional information shown on page 46.  
If the number you want to save is already in the phonebook,  
your phone will display This data is already stored!.  
Managing the Phonebook  
With the OPTION soft key, you can delete phonebook entries,  
copy entries to another handset, check how many empty  
phonebook and speed dial entries you have available, sort your  
phonebook by groups, and name phonebook groups.  
Deleting phonebook entries  
Go to the phonebook and select the entry you want to delete.  
Press the OPTION soft key and select Delete Entry. Your phone  
will ask you to confirm select Yes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 5 1 ] U s i n g t h e P h o n e b o o k  
w w w . u n i d e n . c o m  
     
To delete all the entries from your phonebook, go to the  
phonebook and press the OPTION soft key without selecting an  
entry. Select Delete All. Your phone will ask you to confirm  
select Yes.  
Copying phonebook entries to another handset  
When you copy entries to another handset, the group and speed  
dial information won't be transferred. You phone will cancel the  
copying process if any one of the following things occurs:  
-- If the handset you are copying to doesn't have enough memory  
(the phone will show "Not enough memory in receiving unit").  
-- If the handset you are copying to already has that phone number  
in its phonebook.  
-- A call comes in during the copying process.  
To copy a single entry, go to the  
Phonebook and select the entry you  
ꢀ6QꢀYJKEJꢀWPKV!  
*CPFUGVꢀꢁꢂ  
want to copy. Press the OPTION soft  
*CPFUGVꢀꢁꢃ  
$#%-  
key and select Copy Entry. Select the  
handset you want to copy to the  
entry to.  
1-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U s i n g t h e P h o n e b o o k [ 5 2 ]  
w w w . u n i d e n . c o m  
 
To copy all the phonebook entries, go to the phonebook and  
press the OPTION soft key without selecting an entry. Select  
Copy All. Select the handset you want to copy to the entry to.  
Checking the number of stored entries  
To see how many phonebook entries  
you have, go to the phonebook and  
2JQPG$Mꢀ%CRCEKV[  
0COGꢁZZZꢂꢃꢄꢄ  
press the OPTION soft key and select  
&KCNꢁZZZꢂꢅꢄꢄ  
$#%-  
PhoneBk Capacity. The phone will  
show you how many stored names  
(entries) and how many stored phone  
numbers (total) you have.  
To see your speed dial entries, go to the phonebook and press  
the OPTION key and select Check  
Dials. The phone will show  
you which speed dial numbers have phone numbers stored in  
them.  
Changing the sorting order  
To change the sorting of your  
phonebook, go to the phonebook and  
5GNGEVꢀ/GVJQF  
#NRJCDGVKECNN[  
press the OPTION soft key and select  
)TQWR  
$#%-  
Sort. Select Alphabetically to see the  
list of names in alphabetical order;  
select Group to see the list of groups  
1-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 5 3 ] U s i n g t h e P h o n e b o o k  
w w w . u n i d e n . c o m  
       
in alphabetical order. Enter a letter from the keypad to jump to  
the first entry beginning with that letter.  
Naming phonebook groups  
Your phone comes with 10 groups to organize your phonebook.  
You can name groups things like "Family" or "Friends" or  
"Softball team." This will let you find entries in your  
phonebook more quickly.  
To name a group, go to the phonebook and press the OPTION  
soft key and select Edit Group Name. Select the group number  
(0-9) you want to edit, and enter the name you want for this  
group using the number keypad. Press the center of the joystick  
when you're finished.  
Making Calls with the Phonebook  
To call someone in your phonebook, go to the phonebook and  
select that person's phonebook entry. Select the number (one  
of the four available) that you want to call, and press /flash.  
Using the Speed Dial  
Slide open the keypad. Press and hold the number of the speed  
dial entry you want to call until the phone number appears on  
the display. Press /flash.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
U s i n g t h e P h o n e b o o k [ 5 4 ]  
     
Caller ID Features  
If you subscribe to Caller ID from  
your phone company, your phone will  
show you the caller's phone number  
and name (if available) whenever a  
call comes in:  
ꢀꢁꢂꢃꢄꢅꢃꢆꢇꢆꢀ#/ꢅꢆ  
,QJPꢅ&QG  
ꢃꢀꢃꢈꢃꢀꢃꢈꢃꢀꢃꢀ  
$#%-  
&+#.  
If you subscribe to both Call Waiting and Caller ID the phone  
also show you the name and number of call waiting calls (that  
is, calls that come in while you're on the line.)  
Using the Caller ID List  
Your phone can store up to 100  
Caller ID numbers. To see the Caller  
View the  
Caller ID  
ID list, slide the joystick to the  
right. The phone will show the Caller  
ID list; only the first 13 characters  
of the name are displayed. You can use the joystick to scroll  
through the list, or you enter a letter with the keypad to jump  
to the first caller ID name that starts with that letter. If  
anyone in your phonebook has called you, the icon assigned to  
their number will appear in the Caller ID list. When you're done  
looking at the list, press the BACK soft key to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 5 5 ] C a l l e r I D F e a t u r e s  
w w w . u n i d e n . c o m  
     
If you want to see how many Caller  
ID numbers are stored in your phone,  
go to the Caller ID list and press the  
OPTION soft key. Select CID  
Capacity.  
ꢀꢀ%+&ꢀ%CRCEKV[  
ꢀꢀꢀ0GYꢀꢀꢁꢂꢃꢃ  
ꢀꢀꢀ6QVCNꢁꢂꢃꢃ  
note  
$#%-  
When you delete a Caller  
ID number, you delete it  
permanently.  
Calling someone from the Caller ID list  
Go to the Caller ID list and select the number you want to call.  
If you need to add a "1" to the number for a long distance call,  
press /tone. If you need to add your saved area code to the  
*
number, press #. Then press /flash to dial the number.  
Deleting Caller ID numbers  
To delete only one Caller ID number, go to the Caller ID list and  
select the number you want to delete. Press the OPTION soft  
key, and select Delete Entry. When the phone asks you to  
confirm, select Yes.  
To delete all the Caller ID numbers, go to the Caller ID list and  
press the OPTION soft key. Select Delete All. When the phone  
asks you to confirm, select Yes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C a l l e r I D F e a t u r e s [ 5 6 ]  
w w w . u n i d e n . c o m  
   
Answering Machine  
The phone has a built-in answering machine that answers and  
records incoming calls. You can also use your answering  
machine to record a conversation, leave a voice memo message,  
or announce a special outgoing message to callers when you're  
away from your phone.  
Features  
• Digital Tapeless Recording  
• Up-to 25-30 minutes of Recording Time  
• Call Screening  
• Personal or prerecorded Outgoing Messages  
• Voice Prompts (English, Spanish, or French)  
• Time and Day Announcement  
• Remote Message Retrieval  
• Toll Saver  
• Conversation Recording  
• Voice Memo  
• Message Alert On/Off  
• Retrieve Messages using Handset  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 5 7 ] A n s w e r i n g M a c h i n e  
w w w . u n i d e n . c o m  
     
Setting Up the Answering Machine  
To access the answering machine settings, go to the Setup  
Menu and select Answer Machine.  
Answering  
Machine  
Security Code  
Security Code  
If you want to call in and get your  
messages when you're away from,  
you'll have to set a security code. Go  
to Answer Machine and select  
$#%-  
1-  
Security Code. use the keypad to  
enter a two-digit number (01-99),  
and press the OK soft key when you're done. A confirmation  
tone tells you the security code has been saved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A n s w e r i n g M a c h i n e [ 5 8 ]  
w w w . u n i d e n . c o m  
       
Ring Time  
You can set the number of times the phone will ring before the  
machine answers the call. Go to Answer Machine and select Ring  
Time. Then select the number of times you want the phone to  
ring; choose from 2, 4, or 6 times. The Toll Saver feature makes  
the answering machine answer after two rings if you have new  
messages and after four rings if you don't. If you call long  
distance to check your messages, Toll Saver lets you hang up  
after three rings and not get charged for the call.  
Answering  
Machine  
Ring Time  
Record Time  
Record Time  
You can set how long a caller has to leave a message before the  
answering machine hangs up. Go to Answer Machine and select  
Record Time. Then select the maximum length of messages;  
choose from 1 minute or 4 minutes. The Announce Only feature  
makes the answering machine answer call but it won't let  
callers leave a message. When the Announce Only feature is on,  
and the message counter will read  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 5 9 ] A n s w e r i n g M a c h i n e  
w w w . u n i d e n . c o m  
     
Message Alert  
if you want the answering machine to beep every 15 seconds  
whenever you have unheard messages, turn on the message  
alert tone. Go to Answer Machine and select Message Alert.  
Select On. A confirmation tone tells you the setting has been  
saved.  
Answering  
Machine  
Message Alert  
The message alert turns off automatically after you listen to all  
your new messages. You can also turn off the message alert by  
pressing any key on the base.  
Language  
Language  
To change the language of your answering machine's voice  
prompts and pre-recorded greetings, go to Answer Machine and  
select Language. Select English, Fran ais (French), or Espaol  
(Spanish).  
Call Screen  
Call Screen  
If you want to be able to listen to the caller's message before  
you answer, turn on the call screen feature. Go to Answer  
Machine and select Call Screen. Select On to turn on call  
screening.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
A n s w e r i n g M a c h i n e [ 6 0 ]  
           
Setting Your Outgoing Greeting  
You answering machine comes with a prerecorded greeting:  
"Hello. No one is available to take your call. Please leave a  
message after the tone." You can use this greeting, or you can  
record your own.  
note  
•To finish the setting,  
press end.  
Recording a greeting  
You will hear a beeping  
tone while you set  
greetings and play  
massage from the  
handset.  
To record your own greeting, make sure the phone is in standby  
mode. Press the MSG soft key on the handset. When the  
answering machine start its voice prompts, press 8. After the  
answering machine says, "Record greeting," you can start  
recording. When you're finished, press 8 again. The answering  
machine will play back your greeting so you can hear it.  
Choosing a greeting  
To choose between the two greetings, first make sure the phone  
is in standby mode. Press the MSG soft key on the handset.  
When the answering machine starts its voice prompts, press 5.  
Then press 6 to hear which greeting is currently being used. If  
you want to use the other greeting, press 6 again. (Pressing 6  
switches between the two greetings.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 6 1 ] A n s w e r i n g M a c h i n e  
w w w . u n i d e n . c o m  
       
If you want to delete your greeting, press 6 to play your  
greeting, and then press /4. (You can't delete the  
prerecorded greeting.)  
Using the Answering Machine  
Turning On the Answering Machine  
To turn your answering machine on and off, go to Answer  
Machine, and select Answer On/Off. Choose On to turn the  
answering machine on or Off to turn it off.  
Answering  
Machine  
Answer On/Off  
Reviewing Messages  
When you have a new message, the new message LED on both  
the handset and the base blink. The LEDs stop blinking when  
you've listened to all your new messages. The answering  
machine plays your new messages first. After you play all your  
new messages, you can then play your old messages. Old  
messages will be played in the order in which they were  
received.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A n s w e r i n g M a c h i n e [ 6 2 ]  
w w w . u n i d e n . c o m  
   
You can review your messages from the base or from the handset:  
From the base  
From the handset  
note  
Press  
.The answering machine  
tells you how many new and old  
messages you have. It announces the messages you have. Press /2 to play  
message number, plays the message,  
then announces the time and date  
that message was received.  
Press the MSG soft key.The display  
tells you how many new and old  
Playing your  
messages  
You can't delete  
your messages. After playing the  
message, the answering machine  
announces the time and date that  
message was received.  
unheard messages. If  
you try to delete  
messages before  
listening to them, the  
answering machine will  
beep and say "Please  
playback all messages."  
Press  
beginning of the current message.  
Press repeatedly to go back to a  
previous message.Press and hold  
to rewind through the current  
message.  
once to repeat to the  
Press  
/1 once to repeat to the  
beginning of the current  
Repeating a  
message  
message.Press  
back to a previous message.  
/1 repeatedly to go  
•If you press  
during  
the first two seconds  
(or press /1 during  
the first 4 seconds) of a  
message, the answering  
machine goes back to  
the previous message.  
Press  
to go to the beginning of the Press  
/3 to go to the beginning of  
Skipping a  
message  
next message. Press and hold  
fast forward through the current  
message.  
to  
the next message. Press and hold  
/3 to fast forward through the  
current message.  
While a message is playing, press  
to delete it. The message is  
permanently deleted.  
While a message is playing, press /4  
to delete it. The message is  
permanently deleted.  
Delete a  
message  
While the phone is in standby, press  
to delete all messages. When the  
answering machine asks you to  
confirm, press delete again. All  
messages are permanently deleted.  
Delete all  
messages  
-
Stop  
reviewing  
messages  
Press  
to stop the message  
Press  
/5 to stop the message  
playback and return to standby.  
playback. Press end to exit the  
message system and return to standby.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 6 3 ] A n s w e r i n g M a c h i n e  
w w w . u n i d e n . c o m  
 
Recording a phone conversation  
You can record a phone conversation with your handset. The  
conversation has to last more than two seconds and less than  
ten minutes. During a conversation, press the center of the  
joystick. Select Call Record and press the OK soft key. The  
handset sounds a confirmation tone that can be heard by both  
parties and displays Call Recording. When you want to stop  
recording, press the center of the joystick and select Call  
Record again.  
note  
Only one handset can  
screen calls at a time. If  
another handset is  
screening the call,  
you'll just hear a beep  
when you try to screen  
the call, too.  
•If the recording memory  
is full, Unavailable  
appears in the display.  
You can not record a  
conversation until you  
clear some messages  
from the memory.  
Screening Calls  
You can always screen calls from the base: just let the  
answering machine answer the call and listen to the caller  
leave a message. Answer the phone with the handset if you  
want to talk to the caller.  
•Every state has different  
regulations governing  
the recording of  
conversations over the  
telephone. Make sure to  
check your local, state  
and federal laws before  
using this product to  
record any telephone  
conversation in order to  
determine that your use  
is in compliance with  
such laws or guidelines.  
If you turn on the call screen feature (see page 60), you can  
also screen calls from the handset. Let the answering machine  
answer the call, then press the SCREEN soft key. If you want to  
talk to the caller, just press /flash, and the answering  
machine will stop recording.  
You can not record  
intercom conversations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
A n s w e r i n g M a c h i n e [ 6 4 ]  
     
Remote Operation  
You can check, play, or delete messages when you are away  
from home. You can also record, select, or delete your own  
greeting message. To access your answering machine remotely,  
you need a touch tone telephone and a two-digit security code  
(see Setting a Security Code on page 58).  
1) Call your telephone number and wait for the system to  
answer. If Toll Saver is enabled, answering machine will  
answer in 2 rings if you have new messages and 4 messages  
if you don't. If the answering machine is off, it will answer  
after about 10 rings and sound a series of beeps.  
2) During the greeting message (or a series of beeps when the  
answering machine is off), press 0 and enter your security  
code within two seconds.  
3) The answering machine announces the current time and the  
number of messages stored in memory. You hear "To play  
incoming messages, press zero-two. For help, press one-  
zero." Then, you'll hear a beep.  
note  
•The system will only  
playback messages for  
four minutes and then  
it returns to the  
command waiting mode.  
•To continue playing  
your messages, press 0  
then 2 again within 15  
seconds.  
•If you enter an  
incorrect security code  
three times, you will  
hear a beep and the  
system will return to  
standby.  
•For your convenience, a  
remote operation card  
is provided for you to  
use while away from  
home (refer to page  
92).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 6 5 ] A n s w e r i n g M a c h i n e  
w w w . u n i d e n . c o m  
   
4)  
Enter a command from the following chart within 15  
seconds. After the first command, you have two seconds to  
enter each command.  
Command  
Function  
Command  
Function  
Repeat a Message*  
Play incoming Messages  
answering machine On  
Memo Record/Stop**  
0 then 1  
0 then 2  
0 then 6  
0 then 7  
Greeting Message Record/  
Stop**  
Skip a Message  
0 then 3  
0 then 8  
Delete a Message  
Stop Operation  
answering machine Off  
Help  
0 then 4  
0 then 5  
0 then 9  
1 then 0  
* For the Repeat a Message function, press 0 then 1 within  
about 2 seconds to repeat the previous message, or press 0  
then 1 after about 2 seconds to repeat the current message.  
**The first time you enter the Memo Record or the Greeting  
Message Record command, the answering machine will start  
recording. Enter the same command again to stop recording.  
5) After the command has finished, you hear intermittent beeps  
indicating that the system is in the command waiting mode.  
You can enter another command from the chart, or you can  
hang up to exit the system.  
6) When you hang up, the answering machine automatically  
returns to standby.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
A n s w e r i n g M a c h i n e [ 6 6 ]  
Multi-Handset Features  
The features in this section require a minimum of two handsets  
to operate. To add additional handsets to your system, see  
"Expanding Your Phone" on page 9.  
Text Message  
You can chat with another handset  
using text messages and still be able  
to receive calls. You can use one of  
10 preset messages or write a new  
message. You can also save 10  
custom messages of your own.  
$#%-  
1-  
To enter text message option, press the MENU soft key, and  
then select Text Message icon.  
Sending a New Message  
To send a brand new message, go to New Message. Enter your  
message, and press the center of the joystick when you're done.  
Select the handset you want to send the message to; the  
display will show Done when the message has been sent.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 6 7 ] M u l t i - H a n d s e t F e a t u r e s  
w w w . u n i d e n . c o m  
     
Sending a Preset Message  
To send a preset message, go to New Message, and press the  
PresetMSG soft key. Select Preset Message. Select the message  
you want to send from the following list:  
1. Are you free?  
2. What's up?  
6. Are you ready for a break?  
7. Happy Birthday!!  
3. I need your help.  
4. What's for lunch?  
5. What's for dinner?  
8. Happy Anniversary!!!  
9. Love You!  
10. See you later alligator!  
Then, select the handset you want to send the message to; the  
display will show Done when the message has been sent.  
Using Saved Custom Messages  
You can save up to 10 custom  
messages for later use; each message  
'FKVꢀ%WUVQOꢀ/5)  
ꢁꢂ2GGMCDQQꢃ  
ꢄꢂ&KFꢀ[QWꢀUNGGR  
is saved to one of the number keys  
(0-9). To create a custom message,  
go to Edit Custom Msg, and select the  
number key where you want to store  
$#%-  
'&+6  
this message. (If you want to edit an existing message, select  
the number of the existing message.) Enter your message (up to  
32 characters, including spaces), and press the center of the  
joystick when you're done. Once your custom message is saved,  
you can send it any time you want.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
M u l t i - H a n d s e t F e a t u r e s [ 6 8 ]  
   
To send your custom message, go New Message, and press the  
PresetMSG soft key. Select Custom Message. Select the number  
of the message you want to send. Then, select the handset you  
want to send the message to; the display will show Done when  
the message has been sent.  
Using the Inbox and Outbox  
Your phone stores the last 10 received messages in the Inbox  
and the last 5 sent messages in the Outbox. Unread messages  
have an asterisk (*) next to them. In both the Inbox and the  
Outbox, you can read old messages or delete them. In the  
Inbox, you can also reply to messages or forward them.  
Reading Messages  
Go to Inbox or Outbox. Your phone will list the stored messages  
by showing the other handset's banner name. (The display will  
read No Messages if the box is empty.) Select the message you  
want read. You can use the joystick to scroll through long  
messages.  
Once you have the message on the  
screen, Press the OPTION soft key to  
delete it, forward it, or reply to it:  
(TQOꢀ,CPGꢀꢁꢁꢂꢃꢄ  
)QQFꢀ/QTPKPIꢅ  
$#%-  
126+10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 6 9 ] M u l t i - H a n d s e t F e a t u r e s  
w w w . u n i d e n . c o m  
   
Delete current message  
Select Delete Message. The phone will ask you to confirm; select  
Yes, and the message is deleted.  
Delete all messages  
Select Delete ALL Msg. The phone will ask you to confirm; select  
Yes, and the message is deleted.  
Reply to a message  
Select Reply Message. Enter the reply message you want to send;  
press the center of the joystick when you're finished. The  
display will show Done when the message has been sent.  
Forward a message  
Select Forward Message. Select the handset you want to forward  
the message to. The display will show Done when the message  
has been sent.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
M u l t i - H a n d s e t F e a t u r e s [ 7 0 ]  
Using DirectLink Mode  
In DirectLink Mode, a pair of  
note  
handsets can function as two-way  
radios. You can have up to two  
pairs of handsets in DirectLink  
Mode at a time. DirectLink Mode  
does not interfere with the main  
base's ability to make or receive  
telephone calls. You must set both  
handsets to DirectLink Mode to make a directlink call.  
•If the party is out of  
range, No Signal  
appears in the display,  
and the operation will  
be canceled.  
•While a pair of handsets  
are in DirectLink  
Monitor mode, they  
cannot be used to make  
or receive calls. Other  
handsets can still make  
and receive calls.  
Press the MENU soft key, and select  
the Link Handsets option, then select  
DirectLink Mode. When the phone  
displays DirectLink by pressing  
$#%-  
1-  
center/select knob, press the center  
of the joystick. The phone displays In  
DirectLink Mode.  
To make a DirectLink call, press the DirectLink soft key and  
select the handset you want to call. To cancel the call, press  
the CANCEL soft key. To answer a DirectLink call, press /flash  
or ANSWER soft key. Press when you want to hang up.  
To exit DirectLink mode and be able to receive normal phone  
calls again, press the cancel soft key, and then press OK soft  
key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 7 1 ] M u l t i - H a n d s e t F e a t u r e s  
w w w . u n i d e n . c o m  
     
Room/Baby Monitor  
This feature allows  
you to monitor  
note  
sounds in another  
room. Place a handset  
in the room you wish  
to monitor; it will  
function as a  
•This feature only works  
when both handsets are  
within the range of the  
base.  
microphone. A second  
handset can be used  
as a remote speaker,  
allowing you to  
monitor sounds in the  
room.  
•If the party is out of  
range, No Signal  
appears in the display,  
and the operation will  
be canceled.  
•While a pair of handsets  
are in Room/Baby  
Monitor mode, they  
cannot be used to make  
or receive calls. Other  
handsets can still make  
and receive calls.  
Using Room/Baby  
Monitor  
Press the MENU soft  
key, and select the  
Link Handsets option,  
then select Room  
.KUVGPꢀVQꢁ  
*CPFUGVꢀꢀꢀꢀꢂꢃ  
*CPFUGVꢀꢀꢀꢀꢂꢄ  
$#%-  
1-  
Monitor. When the phone displays Listen to, select the handset  
you want to monitor. Press when you want to stop  
monitoring.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M u l t i - H a n d s e t F e a t u r e s [ 7 2 ]  
w w w . u n i d e n . c o m  
     
Intercom  
You can use the intercom to talk to  
another handset without using the  
phone line. While the phone is in  
standby mode, press hold/x'fr/  
int'com. Select the handset you want  
to page. If you select All, all other  
handsets will be paged.  
If the handset you're trying to page is busy, the phone displays  
System busy. If the handset you're trying to page is out of  
range, the phone displays No Signal. The page is canceled.  
note  
6QꢀKPVGTEQO  
*CPFUGVꢀꢀꢀꢀꢁꢂ  
*CPFUGVꢀꢀꢀꢀꢁꢃ  
•If you receive an  
$#%-  
1-  
outside/intercom call or  
page while selecting  
the other handset, the  
operation is canceled.  
•If the party does not  
answer within one  
minute, the operation is  
canceled.  
Answering an intercom page  
•During an intercom call,  
if you receive a call,  
you will hear a ringer  
tone from the ear  
speaker.  
When the handset receives an intercom page, it sounds a tone  
and shows the ID of the handset that is paging. Pick up the  
handset and press /flash or the ANSWER soft key to answer  
the page.  
To hang up an intercom page, press on either handset or  
return the handset to the cradle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 7 3 ] M u l t i - H a n d s e t F e a t u r e s  
w w w . u n i d e n . c o m  
     
Transferring a Call  
You can transfer a call from one  
note  
handset to another. During a call,  
press hold/x'fr/int'com; this will put  
the call on hold. Select the handset  
you want to page. If you select All,  
all other handsets will be paged. To  
*QNFꢀVQꢁVTCPUHGT  
*CPFUGVꢁꢁꢁꢁꢂꢃ  
*CPFUGVꢁꢁꢁꢁꢂꢄ  
•If all handsets are  
paged, only the first  
party to answer the  
page will connect.  
$#%-  
1-  
cancel the page and go back to the caller, press /flash.  
•If you do not select a  
handset within ten  
seconds, the operation  
will be canceled.  
Answering a transfer page  
When the handset receives a transfer page, it sounds a tone  
and shows the ID of the handset that is paging. Pick up the  
handset and press /flash to answer the page. If you want to  
accept the transfer and talk to the outside caller, press /flash.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M u l t i - H a n d s e t F e a t u r e s [ 7 4 ]  
w w w . u n i d e n . c o m  
   
Note on Power Sources  
note  
Power Failure  
During the period that the power is off you will not be able to  
make or receive calls with the telephone.  
A replacement Uniden  
adapter or battery may  
be purchased by  
Battery replacement and handling  
When the operating time becomes short, even after the battery  
is recharged, please replace the battery. With normal usage,  
your battery should last about one year.  
contacting the Uniden  
Parts Department  
(800) 554-3988. Hours  
are from 8:00 a.m. to  
5:00 p.m. Central  
Time, Monday through  
Friday, or  
Warning  
To avoid the risk of personal injury or property damage from  
fire or electrical shock, use only Uniden AD-830 AC adapters  
and Uniden BT-0001 battery back with your phone.  
Caution  
Use only the specified Uniden battery pack (BT-0001).  
Do not remove the batteries from the handset to charge them.  
Never throw the battery into a fire, disassemble them, or heat them.  
Do not remove or damage the battery casing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 7 5 ] N o t e o n P o w e r S o u r c e s  
w w w . u n i d e n . c o m  
           
Installing a Replacement Battery  
Follow the steps below if you need to replace a battery.  
note  
1) Press down on the handset  
battery case cover (use the finger  
indention for a better grip) and  
slide the cover downward to  
remove.  
Use only the Uniden  
(BT-0001) rechargeable  
battery pack supplied  
with your cordless  
telephone.  
•If you try to use the  
phone when the battery  
case cover is open, you  
will hear beep and see  
2) Remove the existing battery and  
unplug the connector from the  
jack.  
Pbaltetaesreyccloosveertohne the  
display. Close the  
3) Plug the battery connector (red,  
white & black wires) into the jack  
inside the battery compartment.  
(The connector notches fit into  
the grooves of the jack only one  
way). Match the wire colors to  
the polarity label in the battery  
compartment, connect the  
battery cover tightly.  
battery and listen for a click to  
insure connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
N o t e o n P o w e r S o u r c e s [ 7 6 ]  
w w w . u n i d e n . c o m  
     
4) Make sure you have a good  
connection by gently pulling on  
the battery wires. If the  
note  
connection is secure, the battery  
jack will remain in place.  
•Even when the battery  
pack is not being used,  
it will gradually  
discharge over a long  
period of time.  
5) Place the battery case cover back  
on the handset and slide it  
upwards until it clicks into place.  
•For optimum  
performance, be sure to  
return the handset to  
the cradle after each  
telephone call.  
Low battery alert  
When the battery pack is very low, the phone is programmed to  
eliminate functions in order to save power.  
•If the handset is left off  
of the base, the actual  
Talk mode duration will  
be reduced respective  
to the amount of time  
the handset is off the  
cradle.  
The battery pack needs to be charged  
when:  
- The empty battery icon appears.  
ꢀꢀ .QYꢀ$CVVGT[  
-
Low Battery appears in the display.  
If the phone is in standby mode, none  
of keys will operate. If you are on a call, complete your  
conversation as quickly as possible, and return the handset to  
the cradle.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 7 7 ] N o t e o n P o w e r S o u r c e s  
w w w . u n i d e n . c o m  
   
Cleaning the battery charging contacts  
To maintain a good charge, clean the charging contacts on the  
handset once a month. Dampen a cloth with plain water. Gently  
rub the damp cloth over the charging contacts until all visible  
dirt is removed. Dry the contacts thoroughly before returning  
the handset to the cradle.  
Caution: Do not use paint  
thinner, benzene, alcohol, or  
other chemical products.  
Doing so may discolor the  
surface of the telephone and  
damage the finish.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
N o t e o n P o w e r S o u r c e s [ 7 8 ]  
 
General Information  
The phone complies with FCC Parts 15 and 68. Operating  
temperature:  
0 °C to +50 °C (+32 °F to +122 °F)  
AC Adapter Information  
AC Adapter part number: AD-830  
Input Voltage: 120V AC 60Hz  
Output Voltage: 9V DC 400mA  
Battery Information  
Battery part number: BT-0001  
Capacity: 650mAh, 3.7V  
Specifications, features, and availability of optional accessories  
are all subject to change without prior notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 7 9 ] G e n e r a l I n f o r m a t i o n  
w w w . u n i d e n . c o m  
       
Troubleshooting  
If your phone is not performing to your expectations, please try these simple steps  
first. If these steps do not solve your problem, please call our Customer Hotline at  
1-800-297-1023 (Mon - Fri 7 am to 7 pm, Sat/Sun/holidays 9 am to 5 pm, CST).  
Symptom  
Suggestion  
The charge LED won't  
illuminate when the  
• Make sure the AC adapter is plugged into the base or the charger (if you have  
more than one handset) and wall outlet.  
handset is placed in the • Make sure the handset is properly seated in the cradle.  
cradle.  
• Make sure the charging contacts on the handset are clean.  
• Move the handset and/or base away from metal objects or appliances and try  
The audio sounds weak.  
again.  
• Make sure that you are not too far from the base.  
• Make sure that you are not too far from the base.  
• Make sure the line is not in use. If an out call is already using a line, you cannot  
use that line to make another outside call.  
• Check both ends of the base telephone line cord.  
• Make sure the AC adapter is plugged into the base and wall outlet.  
• Disconnect the AC adapter for a few minutes, and then reconnect it.  
• Change the Digital Security Code (see page 13).  
Can't make or receive  
calls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T r o u b l e s h o o t i n g [ 8 0 ]  
w w w . u n i d e n . c o m  
   
Symptom  
Suggestion  
• Make sure that you are not too far from the base.  
The handset doesn't ring • Charge the batteries in the handset for 15-20 hours by placing the handset on  
or receive a page.  
the base or charging cradle.  
• Change the Digital Security Code (see page 13).  
• Keep the handset away from microwave ovens, computers, remote control toys,  
wireless microphones, alarm systems, intercoms, room monitors, fluorescent  
lights, and electrical appliances.  
Severe noise  
interference.  
• Move to another location or turn off the source of interference.  
• The call was placed through a switchboard.  
• Call your local telephone company to verify your Caller ID service is current.  
There may be a problem with your Caller ID service.  
The Caller ID does not  
display.  
You cannot register the • Charge the battery pack for 15-20 hours.  
handset at the base.  
• Change the Digital Security Code (see page 13).  
The handset doesn't  
communicate with other  
handsets.  
• Change the Digital Security Code (see page 13).  
• Make sure that you have registered all handsets.  
An extra handset can't  
join the conversation.  
• Make sure there are not 2 handsets already using the conference feature.  
• Make sure that another handset is not in privacy mode.  
Room Monitor feature  
does not work.  
• Make sure to place the handset(s) within the range of the base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 8 1 ] T r o u b l e s h o o t i n g  
w w w . u n i d e n . c o m  
Symptom  
Suggestion  
•Make sure the base unit is plugged in.  
The answering machine •Make sure that the answering machine is turned on.  
does not work.  
•Make sure that the message record time is not set to Announce only  
(see page 59).  
Messages are  
incomplete.  
•The incoming messages may be too long. Remind callers to leave a brief message.  
•The memory maybe full. Delete some or all of the saved message.  
No sound on the base  
unit or handset speaker •Adjust the speaker volume on the base unit or handset.  
during call monitoring or •Make sure the call screen feature is set to on.  
message playback.  
Cannot access remote  
call-in features from  
another touchtone  
phone.  
•Make sure you are using the correct PIN number.  
•Make sure that the touch-tone phone you're using can transmit the tone for at  
least two seconds. If it cannot, you may have to use another phone to access  
your phone.  
Time stamp cannot be  
heard.  
•Make sure you have set the time (see "Setting Day and Time" on page 24).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T r o u b l e s h o o t i n g [ 8 2 ]  
w w w . u n i d e n . c o m  
System Reset  
De-register the Handset  
1) Press and hold and # for more than 5 seconds. Select  
Deregister HS.  
2) Select the handset ID to be de-registered from the list.  
The phone will ask you to confirm the deregistration.  
Select Yes.  
ꢀꢁ5[UVGOꢀ4GUGV  
&GTGIKUVGTꢀ*5  
4GRNCEKPIꢀ$CUG  
$#%-  
1-  
Replacing the Base Setting  
1) Press and hold end and # for more than 5 seconds.  
Select Replacing Base. Replacing Base appears.  
2) Select Yes.  
3) You will hear a confirmation tone. The base information  
will be deleted.  
ꢀꢁ5[UVGOꢀ4GUGV  
&GTGIKUVGTꢀ*5  
4GRNCEKPIꢀ$CUG  
$#%-  
1-  
When the base information is deleted, the handset  
displays Models vary! Charge handset on the base for  
ꢀ4GRNCEKPIꢀ$CUG  
;GU  
0Q  
registration or refer to Owner's Manual  
.
Re-register the handset to the base (see page 11).  
$#%-  
1-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 8 3 ] T r o u b l e s h o o t i n g  
w w w . u n i d e n . c o m  
     
Liquid Damage  
Moisture and liquid can damage your cordless phone. Follow the steps below if your phone gets  
wet:  
Case  
Action  
If the handset or base is exposed to  
moisture or liquid, but only the exterior Wipe off the liquid, and use as normal.  
plastic housing is affected.  
If moisture or liquid has entered the  
plastic-housing (i.e. liquid can be heard  
in the phone or liquid has entered the  
handset battery compartment or vent  
openings on the base).  
Handset:  
1) Remove the battery cover and leave it off for ventilation.  
2) Disconnect the battery pack. Leave the battery cover off and  
the battery pack disconnected for at least 3 days.  
3) Once the handset is completely dry, reconnect the battery pack  
and the battery cover.  
4) Recharge the handset's battery pack for 20 hours before using.  
Base:  
1) Disconnect the AC adapter from the base, cutting off electrical  
power.  
2) Disconnect the telephone cord from the base.  
3) Let dry for at least 3 days.  
IMPORTANT: You must unplug the telephone line while  
recharging the battery packs to avoid charge interruption.  
CAUTION: DO NOT use a microwave oven to speed up the drying  
process. This will cause permanent damage to the handset, base  
and the microwave oven.  
After following these steps, if your cordless telephone does not  
work, please call our Customer Service Hotline at 1-800-297-1023.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
L i q u i d D a m a g e [ 8 4 ]  
   
Warning!  
A plug and jack used to connect this equipment to the  
premises wiring and telephone network must comply with  
the applicable FCC Part 68 rules and requirements adopted  
by the ACTA. A compliant telephone cord and modular plug  
is provided with this product. It is designed to be  
connected to a compatible modular jack that is also  
compliant. See installation instructions for details.  
The REN is used to determine the number of devices that  
may be connected to a telephone line. Excessive RENs on a  
telephone line may result in the devices not ringing in  
response to an incoming call. In most but not all areas,  
the sum of RENs should not exceed five (5.0). To be  
certain of the number of devices that may be connected to  
a line, as determined by the total RENs, contact the local  
telephone company. For products approved after July 23,  
2001, the REN for this product is part of the product  
identifier that has the format US:AAAEQ##TXXXX. The  
digits represented by ## are the REN without a decimal  
point (e.g., 03 is a REN of 0.3). For earlier products, the  
REN is separately shown on the label.  
If this equipment causes harm to the telephone network,  
the telephone company will notify you in advance that  
temporary discontinuance of service may be required. But  
if advance notice isn't practical, the telephone company  
will notify the customer as soon as possible. Also, you will  
be advised of your right to file a complaint with the FCC if  
you believe it is necessary.  
The telephone company may make changes in its facilities,  
equipment, operations or procedures that could affect the  
operation of the equipment. If this happens the telephone  
company will provide advance notice in order for you to  
make necessary modifications to maintain uninterrupted  
service.  
Precautions!  
The cords on this product and/or accessories contain lead,  
a chemical known to the State of California to cause birth  
defects or other reproductive harm. Wash hands after  
handling.  
Before you read anything else, please observe the  
following:  
Warning!  
Uniden America Corporation DOES NOT represent this unit  
to be waterproof. To reduce the risk of fire, electrical  
shock, or damage to the unit, DO NOT expose this unit to  
rain or moisture.  
Important Safety Instructions  
When using your telephone equipment, basic safety  
precautions should always be followed to reduce the risk  
of fire, electric shock and injury to persons, including the  
following:  
Rechargeable Lithium Ion Battery  
Warning  
1. Do not use this product near water, for example, near a  
bath tub, wash bowl, kitchen sink or laundry tub, in a  
wet basement or near a swimming pool.  
2. Avoid using a telephone (other than a cordless type)  
during an electrical storm. There may be a remote risk  
of electric shock from lightning.  
• This equipment contains a rechargeable Lithium Ion  
battery.  
• The rechargeable Lithium Ion battery contained in this  
equipment may explode if disposed of in a fire.  
• Do not short-circuit the battery.  
• Do not charge the rechargeable Lithium Ion battery used  
in this equipment in any charger other than the one  
designed to charge this battery as specified in the  
owner's manual. Using another charger may damage the  
battery or cause the battery to explode.  
3. Do not use the telephone to report a gas leak in the  
vicinity of the leak.  
4. Use only the power cord and batteries indicated in this  
manual. Do not dispose of batteries in a fire. They may  
explode. Check with local codes for possible battery  
disposal instructions.  
5. Do not disassemble any component of this product.  
Rechargeable Lithium Ion Batteries  
Must Be Recycled or Disposed of  
Properly  
SAVE THESE INSTRUCTIONS  
CAUTION  
Risk of explosion if battery is replaced by an incorrect  
type. Dispose of used batteries according to the  
instructions. Do not open or mutilate the battery, and  
disconnect the battery before shipping this product.  
The exclamation point within an equilateral  
is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
Please follow instructions for repairing, if any (e.g. battery  
replacement section); otherwise do not substitute or  
repair any parts of the device except as specified in this  
manual.  
Connection to party line service is subject to state tariffs.  
Contact the state public utility commission, public service  
commission or corporation commission for information.  
This equipment is hearing aid compatible.  
Should you experience trouble with this equipment, please  
contact Uniden customer service at 800-297-1023. If the  
equipment is causing harm to the telephone network, the  
telephone company may request that you disconnect the  
equipment until the problem is resolved.  
The FCC Wants You To Know  
This equipment complies with Part 68 of the FCC rules and  
the requirements adopted by the ACTA. On the bottom of  
this equipment is a label that contains, among other  
information, a product identifier in the format  
US:AAAEQ##TXXXX. If requested, this number must be  
provided to the telephone company.  
Uniden works to reduce lead content in our PVC coated  
cords in our products and accessories.  
An applicable Universal Service Order Codes (USOC)  
certification for the jacks used in this equipment is  
provided (i.e., RJ11C) in the packaging with each piece of  
approved terminal equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 8 5 ] P r e c a u t i o n s & W a r r a n t y  
w w w . u n i d e n . c o m  
   
NOTICE: According to telephone company reports, AC  
electrical surges, typically resulting from lightning strikes,  
are very destructive to telephone equipment connected to  
AC power sources. To minimize damage from these types of  
surges, a surge arrestor is recommended.  
Changes or modifications to this product not expressly  
approved by Uniden, or operation of this product in any  
way other than as detailed by the owner's manual, could  
void your authority to operate this product.  
This device complies with part 15 of the FCC rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and (2)  
This device must accept any interference received,  
including interference that may cause undesired  
operation. Privacy of communications, may not be ensured  
when using this phone.  
To insure the safety of users, the FCC has established  
criteria for the amount of radio frequency energy various  
products may produce depending on their intended usage.  
This product has been tested and found to comply with  
the FCC’s exposure criteria. For body worn operation, the  
FCC RF exposure guidelines were also met when used with  
the Uniden accessories supplied or designed for this  
product. Use of other accessories may not ensure  
compliance with FCC RF exposure guidelines and should be  
avoided.  
Finally, it should be noted that some cordless telephones  
operate at frequencies that may cause interference to  
nearby TVs and VCRs. To minimize or prevent such  
interference, the base of the cordless telephone should  
not be placed near or on top of a TV or VCR. If interference  
is experienced, moving the cordless telephone farther  
away from the TV or VCR will often reduce or eliminate the  
interference.  
STATEMENT OF REMEDY: In the event that the product does  
not conform to this warranty at any time while this  
warranty is in effect, warrantor will either, at its option,  
repair or replace the defective unit and return it to you  
without charge for parts, service, or any other cost (except  
shipping and handling) incurred by warrantor or its  
representatives in connection with the performance of this  
warranty. Warrantor, at its option, may replace the unit  
with a new or refurbished unit. THE LIMITED WARRANTY  
SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY  
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND  
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE  
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY  
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT  
COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT  
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states  
do not allow this exclusion or limitation of incidental or  
consequential damages so the above limitation or  
exclusion may not apply to you.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications  
between the handset and base of your cordless telephone  
are accomplished by means of radio waves which are  
broadcast over the open airways.  
Because of the inherent physical properties of radio waves,  
your communications can be received by radio receiving  
devices other than your own cordless telephone unit.  
Consequently, any communications using your cordless  
telephone may not be private.  
One Year Limited Warranty  
Important: Evidence of original purchase is required for  
warranty service.  
LEGAL REMEDIES: This warranty gives you specific legal  
rights, and you may also have other rights which vary from  
state to state. This warranty is void outside the United  
States of America and Canada.  
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to  
the original retail owner, this Uniden Product to be free  
from defects in materials and craftsmanship with only the  
limitations or exclusions set out below.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:  
If, after following the instructions in the owner's manual  
you are certain that the Product is defective, pack the  
Product carefully (preferably in its original packaging).  
Disconnect the battery from the Product and separately  
secure the battery in its own separate packaging within  
the shipping carton. The Product should include all parts  
and accessories originally packaged with the Product.  
Include evidence of original purchase and a note  
describing the defect that has caused you to return it. The  
Product should be shipped freight prepaid, by traceable  
means, to warrantor at:  
Radio Interference  
Radio interference may occasionally cause buzzing and  
humming in your cordless handset, or clicking noises in  
the base. This interference is caused by external sources  
such as TV, refrigerator, vacuum cleaner, fluorescent  
lighting, or electrical storm. Your unit is NOT DEFECTIVE. If  
these noises continue and are too distracting, please  
check around your home to see what appliances may be  
causing the problem. In addition, we recommend that the  
base not be plugged into a circuit that also powers a  
major appliance because of the potential for interference.  
Be certain that the antenna on the unit is fully extended  
when needed.  
WARRANTY DURATION: This warranty to the original user  
shall terminate and be of no further effect 12 months after  
the date of original retail sale. The warranty is invalid if  
the Product is (A) damaged or not maintained as  
reasonable or necessary, (B) modified, altered, or used as  
part of any conversion kits, subassemblies, or any  
configurations not sold by Uniden, (C) improperly  
installed, (D) serviced or repaired by someone other than  
an authorized Uniden service center for a defect or  
malfunction covered by this warranty, (E) used in any  
conjunction with equipment or parts or as part of any  
system not manufactured by Uniden, or (F) installed or  
programmed by anyone other than as detailed by the  
owner's manual for this product.  
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
In the unlikely event that you consistently hear other  
voices or distracting transmissions on your phone, you  
may be receiving radio signals from another cordless  
telephone or other source of interference. If you cannot  
eliminate this type of interference, you need to change to  
a different channel.  
(800) 297-1023, 7:00 a.m. to 7:00 p.m. Monday through  
Friday; 9:00 a.m. through 5:00 p.m., Saturday, Sunday and  
Holidays (except Thanksgiving and Christmas); all Central  
Time,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P r e c a u t i o n s & W a r r a n t y [ 8 6 ]  
w w w . u n i d e n . c o m  
 
I.C. Notice  
TERMINAL EQUIPMENT  
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical  
Specifications.  
This is confirmed by the registration number. The abbreviation, IC, before the  
registration number signifies that registration was performed based on a Declaration  
of Conformity indicating that Industry Canada technical specifications were met. It  
does not imply that Industry Canada approved the equipment.  
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the  
equipment itself. The REN assigned to each terminal equipment provides an  
indication of the maximum number of terminals allowed to be connected to a  
telephone interface. The termination on an interface may consist of any  
combination of devices subject only to the requirement that the sum of the Ringer  
Equivalence Numbers of all the devices does not exceed five.  
RADIO EQUIPMENT  
The term "IC:" before the radio certification number only signifies that Industry Canada  
technical specifications were met.  
Operation is subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference, including interference that  
may cause undesired operation of the device. "Privacy of communications may not be ensured  
when using this telephone".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 8 7 ] I . C . N o t i c e  
w w w . u n i d e n . c o m  
   
Custom Message . . . . . . . . 68 In box/Out box . . . . . . . . . 69  
Index  
A
Key touch tone . . . . . . . . . 22  
D
Animations. . . . . . . . . . . . 28  
Answering Machine  
Keypad lock. . . . . . . . . . . . 30  
L
Date & time . . . . . . . . . . . 24  
Delete ringer. . . . . . . . . . . 28  
Answering Mode. . . . . . . 57  
Call screen . . . . . . . . . . 60  
Message alert . . . . . . . . 60  
Security code. . . . . . . . . 58  
Setting up menu . . . . . . 58  
Anykey Answer . . . . . . . . . 22  
Area Code. . . . . . . . . . . . . 25  
Audio Tone. . . . . . . . . . . . 40  
AutoTalk . . . . . . . . . . . . . 21  
De-register the Handset . . . 83 Language . . . . . . . . . . 22, 60  
Dial mode. . . . . . . . . . . . . 25 LCD contrast . . . . . . . . . . . 23  
Digital security code . . . . . 13 Link handsets . . . . . . . 71, 72  
DirectLink. . . . . . . . . . . . . 71 Liquid damage . . . . . . . . . . 84  
Distinctive ID . . . . . . . . . . 21 Low battery. . . . . . . . . . . . 77  
E, F, G  
M, N, O  
Earpiece volume . . . . . . . . 38 Making a call. . . . . . . . . . . 32  
Expanding your phone . . . . . 9 Message Alert . . . . . . . . . . 60  
Find handset. . . . . . . . . . . 43 Mute  
B, C  
General information . . . . . . 79  
Global set. . . . . . . . . . . . . 23  
H
Handset setup. . . . . . . . . . 21  
Hands-free conversation . . . 33  
Hanging up. . . . . . . . . . . . 34  
Headset installation. . . . . . 14  
Hold . . . . . . . . . . . . . . . . 36 Phonebook  
Holster. . . . . . . . . . . . . . . 14  
Handset ringer . . . . . . . . 41  
Microphone . . . . . . . . . . 41  
Out going greeting. . . . . . . 61  
Choosing . . . . . . . . . . . . 61  
Recording . . . . . . . . . . . 61  
Out of range . . . . . . . . . . . 34  
Backlight Color . . . . . . . . . 31  
Banner . . . . . . . . . . . . . . 30  
Battery  
Replacement . . . . . . . . . 76  
Calendar . . . . . . . . . . . . . 44  
Call screen . . . . . . . . . . . . 60  
Call transfer feature. . . . . . 74  
Caller ID  
P, Q  
Capacity . . . . . . . . . . . . 53  
Call Waiting. . . . . . . . . . 35  
CIDCW . . . . . . . . . . . . . 55  
Copying entries. . . . . . . . 52  
Group . . . . . . . . . . . . . . 50  
Making calls. . . . . . . . . . 54  
Name . . . . . . . . . . . . . . 47  
Number . . . . . . . . . . . . . 47  
I, J, K  
CWDX . . . . . . . . . . . . . . 35 I.C. notice . . . . . . . . . . . . 87  
Clarity Booster . . . . . . . . . 42 Important safety  
Conference. . . . . . . . . . . . 36 instructions . . . . . . . . . . . 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
I n d e x [ 8 8 ]  
 
Sort order . . . . . . . . . . . 53  
Speed dial. . . . . . . . . . . 50  
Unique color . . . . . . . . . 49  
Unique display. . . . . . . . 49  
Unique ring. . . . . . . . . . 48  
Power failure . . . . . . . . . . 75  
Precautions . . . . . . . . . . . 85  
Preset message . . . . . . . . . 68  
Privacy mode . . . . . . . . . . 22  
S
Setting up  
Answering Machine. . . . . 58  
base unit . . . . . . . . . . . . 8  
Telephone Line. . . . . . . . . 8  
Soft Key . . . . . . . . . . . . . . 16  
Speaker phone. . . . . . . . . . 33  
Speaker volume  
Base. . . . . . . . . . . . . . . 38  
Handset . . . . . . . . . . . . 40  
Storing a caller ID or redial  
number . . . . . . . . . . . . . . 51  
System Setup . . . . . . . . . . 21  
R
Receiving a call. . . . . . . . . 33  
Record ringer . . . . . . . . . . 27  
Record Time . . . . . . . . . . . 59  
Recording conversation . . . 64 T, U, V  
Redialing a call. . . . . . . . . 37  
Register the handset . . . . . 11  
Reminder . . . . . . . . . . . . . 44  
Remote operation . . . . . . . 65  
Replacement battery . . . . . 76  
Reviewing message . . . . . . 62  
Ring options. . . . . . . . . . . 26  
Ring time. . . . . . . . . . . . . 59  
Ringer tone . . . . . . . . . . . 26  
Ringer volume  
Text message. . . . . . . . . . . 67  
In box/Out box . . . . . . . 69  
Themes . . . . . . . . . . . . . . 29  
Tone dial . . . . . . . . . . . . . 41  
Transferring a call . . . . . . . 74  
Troubleshooting. . . . . . . . . 80  
W, X, Y, Z  
Wall paper . . . . . . . . . . . . 29  
Warranty. . . . . . . . . . . . . . 86  
Base . . . . . . . . . . . . . . 38  
Handset . . . . . . . . . . . . 39  
Room/baby monitor. . . . . . 72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 8 9 ] I n d e x  
w w w . u n i d e n . c o m  
Memo  
Download from Www.Somanuals.com. All Manuals Search And Download.  
w w w . u n i d e n . c o m  
[ 9 0 ]  
Memo  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 9 1 ]  
w w w . u n i d e n . c o m  
Remote Operation Card  
C U T  
C U T  
REMOTE OPERATION CARD  
REMOTE OPERATION CARD  
Remote access away from  
home  
Turn on the answering  
system remotely  
Remote access away from  
home  
Turn on the answering  
system remotely  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering system announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering system announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
4. Press 0 then 6 to turn the  
answering system on.  
4. Press 0 then 6 to turn the  
answering system on.  
C U T  
C U T  
REMOTE OPERATION CARD  
REMOTE OPERATION CARD  
Remote access away from  
home  
Turn on the answering  
system remotely  
Remote access away from  
home  
Turn on the answering  
system remotely  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
1. Call your phone number from a  
touch-tone phone.  
1. Call your phone and let it ring  
10 times until you hear a beep.  
2. Press 0 and then enter your  
PIN code.  
3. Press 0 then 5 to stop  
the announcement.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering system announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
2. During the outgoing message,  
press 0 and enter your PIN code.  
The answering system announces  
the number of messages stored in  
memory and the voice prompts.  
3. To quit, hang up the phone.  
4. Press 0 then 6 to turn the  
answering system on.  
4. Press 0 then 6 to turn the  
answering system on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R e m o t e O p e r a t i o n C a r d [ 9 2 ]  
w w w . u n i d e n . c o m  
   
C U T  
C U T  
Task  
Repeat a Message  
Key  
Task  
Repeat a Message  
Key  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Answering System On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answer System Off  
Answering System On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answer System Off  
Help Guidance  
Help Guidance  
C U T  
C U T  
Task  
Repeat a Message  
Key  
Task  
Repeat a Message  
Key  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Playing incoming Messages  
Skipping a Message  
Deleting a Message  
Stop Operation  
Answering System On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answer System Off  
Help Guidance  
Answering System On  
Memo Record/Stop  
Greeting Message Record/Stop  
Answer System Off  
Help Guidance  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[ 9 3 ] R e m o t e O p e r a t i o n C a r d  
w w w . u n i d e n . c o m  
At Uniden, we'll take care of you!  
Thank you for purchasing a Uniden product. If you have any questions or problems,  
please do not return this product to the place of purchase.  
Having Trouble?  
Our customer care specialists are here to help you! Call our Customer  
Hotline at 1-800-297-1023 Mon - Fri 7 am to 7 pm, Sat/Sun/holidays  
Need a part?  
To order headsets, additional handsets, replacement batteries or other  
accessories, call our Parts Department at 1-800-554-3988,  
Help for our Hearing Impaired Customers  
If you need special assistance or have questions on the accessibility  
features of this product, please call 1-800-297-9314 (voice) or  
1-800-874-9314 (TTY)  
May be covered under one or more of the following U.S. patents:  
4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905  
5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790  
5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312  
5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152  
5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227  
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082  
6,125,277 6,253,088 6,314,278 6,418,209 6,618,015 6,671,315  
6,714,630  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REGISTER ONLINE TODAY!  
THANK YOU FOR BUYING A UNIDEN PRODUCT.  
©2004 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.  
UPZZ01357BZ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Thermador Ventilation Hood VTI610D User Manual
Toastmaster Kitchen Grill GR26SBTMRCAN User Manual
Tripp Lite Surge Protector PS7224 20HW User Manual
Turbo Air Refrigerator MSR 49NM User Manual
Verilux Vacuum Cleaner VH04WW1 User Manual
Vizio Flat Panel Television D32h C1 User Manual
Vornado Electric Heater EH1 0020 01 User Manual
Vulcan Hart Convection Oven C4ED User Manual
Vulcan Hart Outdoor Cart VHFA18 User Manual
Wayne Water Pump 353601 001 User Manual