Lullaboo G403 Baby Monitor
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Customer Care .............................................................................................2
Camera On............................................................................................. 21
Recorder Setup Screen...................................................................... 22
Network Setup Screen....................................................................... 26
Alarm Setup Screen............................................................................ 29
IntroDuCtIon ..........................................................................4
FEATURES ......................................................................................................4
GettInG starteD......................................................................5
Using This Manual ......................................................................................5
What’s Included...........................................................................................5
System Setup Screen.............................................................................. 31
System Upgrade.................................................................................. 36
Language ............................................................................................... 36
Quick Tips ................................................................................................... 37
Getting to Know the MOnitor and Camera.......................................6
What the lights mean ...........................................................................7
remote aCCess...................................................................... 38
Setting Up the Equipment ......................................................................7
Set Up the Monitor ................................................................................7
Mount the Camera Stand....................................................................8
Attach the Camera.................................................................................9
Connect to Power ..................................................................................9
Setting Up Your System ...........................................................................9
Camera Settings .....................................................................................9
System Settings ......................................................................................9
Recording Settings ............................................................................. 10
Overview..................................................................................................... 38
System Requirements........................................................................ 38
Connecting to the Internet.............................................................. 38
Connecting to the Intranet (Home network)............................ 39
Downloading and Using the Apps.................................................... 39
Android™ ....................................................................................................39
iPhone® ................................................................................................... 42
soLVInG ProBLems ............................................................... 44
aDDItIonaL InFormatIon .................................................. 46
Product Specifications........................................................................... 46
unIDen GuarDIan LuLLaBoo FIrmWare oPeratIon
oVerVIeW ............................................................................ 11
Live Screen................................................................................................. 11
What the icons Mean......................................................................... 12
Changing How the Live Screen Displays.................................... 14
Using the PentaZoom™ Feature.................................................... 14
Using Your System .................................................................................. 15
Recording Live Video......................................................................... 15
Playing Back Recorded Video ......................................................... 15
Adding New Cameras........................................................................ 16
Lithium-Polymer Battery Warning......................................... 47
recycling and Disposal Information...................................... 47
FCC Compliance Information ................................................. 48
Part 15 Compliance Statement...................................................... 48
RF Exposure Information.................................................................. 48
IC Compliance Information..................................................... 49
Radio Equipment Notice .................................................................. 49
GuarDIan LuLLaBoo sCreen DesCrIPtIon...................... 18
Overview..................................................................................................... 18
Guardian Lullaboo Settings Screen................................................... 18
Ce Compliance Information.................................................... 49
three-Year Limited Warranty................................................. 49
Camera Setup Screen............................................................................. 20
Pairing ..................................................................................................... 20
Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden
expects consumer’s use of these products to be in compliance with all local, state and federal law. For further information
on video surveillance and audio recording legal requirements, please consult your local, state and federal law.
© 2013. All rights allowed by law are hereby reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
IntroDuCtIon
Features
•
•
•
•
•
•
•
•
•
•
2.4GHz Digital FHSS
4.3” high-resolution touchscreen LCD
Easy to use graphic interface
Secure, interference-free video
Up to 500’ wireless transmission
Video and audio transmission
Quad, Scan, and Full screen view
Supports up to 4 cameras
Infrared LEDs for night vision (up to 20’
Built-in rechargeable Lithium Polymer battery (up to 3 hours for the camera and 3.5 hours for the
monitor)
•
•
•
•
•
4GB SD card included for video recording (supports up to 32GB)
Instant record
Digital PentaZoom
Remote access to live video via iPhone®/iPad® app, Android™ Smartphone/Tablet app, and PC.
E-mail alert of motion detection
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG starteD
usInG thIs manuaL
This manual is set up in six main sections:
•
•
Getting Started. This section describes your hardware and how to physically set it up.
Uniden Guardian™ Lullaboo Firmware Operations Overview. This section lists basic operations in
an abbreviated format. It references screen details in the third section.
•
•
Guardian Lullaboo Screen Descriptions. Here you will find detailed descriptions of each screen
and how it is used.
Remote Access. This section tells you how to connect your baby monitor to the internet and
access it from your PC or other devices.
•
•
Maintaining Your System
Solving Problems
What’s InCLuDeD
You should have the following items:
•
•
•
•
Lullaboo G403 Monitor and Cradle (1 each)
Lullaboo G403 Camera (1)
Lullaboo G403 Camera Stand (1)
AC Power Adapters (2)
•
•
•
•
Mounting Screws and Anchors
Ethernet Cable
SD card (4GB included; supports up to 32GB)
Owner’s Manual
If any items are missing or damaged, contact our Customer Care Line immediately.
Never use damaged products!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG to KnoW the monItor anD Camera
Monitor
Cradle
Antenna
(back/side)
Reset
Receiver
Power Dock
Power
On/Oꢀ
Data Cable
Connection
SD slot
AC Power
Connection
AC Power
Connection
Pull-Out
Stand
Camera
Antenna
Light Sensor
Power
IR LEDs
Link
Lens
DC Jack
Charge Link Power Microphone
LEDs
6
Download from Www.Somanuals.com. All Manuals Search And Download.
What the LIGhts mean
LED
State
On
What it means
The camera is on.
Power
(Blue)
Off
The camera is off.
Flashing The camera is in pairing mode.
On
Link
The camera is connected to the monitor.
(Amber)
Off
On
The camera is in standby.
The battery is charging.
The battery has charged.
Charge
(Green)
Off
settInG uP the equIPment
set uP the monItor
1. If you are using the monitor as a stand-alone unit, flip out the stand on the back of the monitor
and extend the antenna. Connect an AC adapter to the power input on the side of the monitor.
If you are using the monitor in the cradle, insert the monitor into the cradle and connect an AC
adapter to the input on the back of the cradle. Extend the antenna.
2. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.
3. Press and hold the PoWer button on the top of the monitor for 3 - 4 seconds to power it up.
4. The monitor displays the Uniden Welcome screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the camera is powered up.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
mount the Camera stanD
General Guidelines
The camera included with your monitor is NOT weatherproof; it is an indoor camera.
As dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the
infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.
Placement considerations
Consider the following when placing a camera:
•
The clearest line-of-sight between the camera and monitor is best.
— Walls, especially brick and concrete, shorten the transmission distance.
— Placement next to windows allows better transmission.
•
•
Optimized motion detection range is 6 - 12 feet for the camera. The farther away an object is, the
less accurate the motion detection.
Avoid having a direct light source in view of the camera (ceiling or floor lamps, spotlights on
your property or neighboring properties, street lights, etc.).
You can mount the stand on a wall, table-top, or the ceiling. If you mount the stand on the ceiling
or an overhang in the house, just turn the camera right-side up once it is installed. When you are
positioning the camera, you might want to bring the monitor along; it’s much easier to get the
camera into the right position when you have the display handy.
1. Hold the base of the camera stand where you want to mount it and mark the location of the
screw holes.
2. Use the included screws and anchors to attach the base to the wall or ceiling.
3. Before attaching the camera, tug gently on the stand to make sure it is securely in place.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
attaCh the Camera
Place the stand swivel mount over the camera’s stand
connection and slide the mount to the left until it clicks
in place.
ConneCt to PoWer
1. Insert the AC adapter power plug into the camera’s DC adapter input jack. Plug the
other end into a 120 volt AC (standard indoor) power
outlet.
2. Press PoWer and make sure the blue power LED turns on. If
it doesn’t, try reconnecting the AC adapter, making sure the
power outlet isn’t controlled by a wall switch.
AC adapter
power plug
settInG uP Your sYstem
You can now set your camera and system to your preferred settings.
Camera settInGs
•
•
•
Brightness (“Guardian Lullaboo Settings Screen” on page 18)
Motion Detection (“Guardian Lullaboo Settings Screen” on page 18)
Schedule Recordings (“Schedule Record” on page 25)
sYstem settInGs
•
•
•
•
Power Saving (“Power Saving” on page 31)
Screen Auto Lock (“Screen Auto Lock” on page 32)
Time (“Time” on page 33)
Security code (“Security Code” on page 27)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Language (default language is English; “Changing the Language” on page 36)
reCorDInG settInGs
•
•
Motion Detection (“Motion Detection” on page 22)
Schedule Recordings (“Schedule Record” on page 25)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
unIDen GuarDIan LuLLaBoo FIrmWare
oPeratIon oVerVIeW
Your baby monitor uses Uniden Guardian Lullaboo firmware to operate a series of screens that
lets you choose groups of operations. For example, when you tap on the camera icon in the Pop
Up menus, you can set how you want the main viewing screen - called the live screen - to display
images from the paired cameras. You can scan between cameras, show all cameras on a single
screen (Quad view), or only display a specific camera.
The live screen lets you view the camera transmissions. It also lets you set up your screen display
and make adjustments to it. Icons on the screen itself let you monitor power and camera status.
Lullaboo’s firmware always defaults to the Live screen in Quad mode after being idle for
2 minutes while in any other system screen. This default ensures that the system is ready
to record video even if you forget to return to the Live screen. The system can only start a
recording while in Live screen mode.
LIVe sCreen
Internet
connection
status
Camera number/
Signal strength
Battery
status
SD card
status
Record
status
Motion
status
Pop up
menu tab
Pop up
menus
11
Download from Www.Somanuals.com. All Manuals Search And Download.
What the ICons mean
Icon
What it does
CamEra moDE
Select how you want the Live screen to display camera input:
•Scan between cameras (5 seconds)
•Quad view (all paired cameras display)
•Full view (1 camera displays on full screen)
VoLumE
Adjust the volume level.
unIDEn GuarDIan
LuLLaboo FIrmWarE
SEttInGS
Access the Uniden Guardian Lullaboo Firmware operation screens or view
recorded events.
SD CapaCIty
Indicates memory capacity remaining.
battEry CapaCIty
Displays battery capacity. This graphic shows battery at nearly full.
IntErnEt/IntranEt
StatuS
Appears in Live view. Indicates connection to the internet/intranet is in
progress.
Appears in Live view and Pop Up menu. Indicates internet connection is
established.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Icon
What it does
Appears in Live view. Indicates remote viewing is in progress.
Appears in Live view. Indicates system is not connected to the internet.
Appears in Live view. Indicates the intranet connection is established.
CamEra numbEr
Displays the camera number and signal strength through the status lines to
the left of the number.
rECorD StatuS
Tap to start or stop recording for that camera.
•Steady on - Not recording
•Flashing - Recording
motIon
System indicates motion detection recording in progress.
System indicates scheduled recording in progress.
SChEDuLED
pop up mEnu tab
Opens and closes the Pop Up menu display.
no SD CarD InDICator
Displays red when the SD card is not present or is damaged.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ChanGInG hoW the LIVe sCreen DIsPLaYs
The Live screen displays in 2 views - Quad view or Full view. Quad view divides the screen’s image
area into 4 quadrants and displays camera video in each quadrant. If less than 4 cameras are on,
only those cameras’ video will display on the Live screen.
Full view displays a single camera’s video on the entire screen. If you are in Quad view, tap on the
camera quadrant you want to expand to Full view. Tap on that image to return to Quad view.
usInG the PentaZoom™ Feature
While in any camera’s full screen view, selecting the + icon on the right side of the screen enables
the PentaZoom feature. PentaZoom lets you select from 5 sections of the video image. Tap on a
section and it will digitally zoom to full screen, focused on that section. Tap on the screen to return
to Full screen mode; to go back to the PentaZoom screen, tap
.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
usInG Your sYstem
reCorDInG LIVe VIDeo
1. On the live screen, tap
for the camera to begin recording.
2. Tap it again to stop recording.
You can record from all cameras at the same time.
PLaYInG BaCK reCorDeD VIDeo
From the pop-up menus, tap
the following icons as they
appear on the screens:
The Record List screen displays.
1. Tap on the highlighted day containing the recording you want to view or on a specific camera
to only view that camera’s recordings. The record list screen displays those recordings listed in
a folder.
If you tap on a day that is not highlighted, a folder displays with no recordings listed.
2. Tap on the recording you want to view. It displays on the screen.
3. Tap on any area of the screen that does not have control icons to bring up the playback
progress bar. Tap that area again to close it.
4. While playback progress is visible, you can fast forward/rewind by dragging the playback bar
forwards or backwards.
5. When playback ends, tap to return to the record list.
You can press the double arrow to move to the next or previous video.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
aDDInG neW Cameras
Your monitor supports a total of four active cameras at a time. When you add a camera, you
have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can
communicate).
some thinGs to knoW about PairinG cameras
•
If a camera is already assigned to the selected channel, the monitor overwrites that camera link
with the new one.
•
Only pair one camera at a time! The monitor links to the first camera it detects. If two or more
cameras are in pairing mode, you can’t control which camera the monitor will detect first.
Pair camera
1. From the Pairing camera screen (see “Pairing” on page 20), tap the camera image you want to
pair. A processing icon displays for a 60 second countdown.
2. During the 60 second countdown, quickly press and release the Pairing button on that camera
(see ”Pairing” on page 20).
3. The system automatically adjusts the camera on screen accordingly.
4. If you have any trouble, consult the the table on page 17.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshootinG camera PairinG
Consult the following table for camera pairing troubleshooting suggestions:
If...
try...
•making sure the camera is plugged in and the
blue LED is on.
•making sure that both the camera’s and the
monitor’s antennas are extended.
•making sure the camera is paired to the correct
channel.
the camera’s signal status icon shows no bars
•re-pairing the camera and monitor.
the camera’s signal status icon shows one or
two bars or the video quality is poor
See “General Guidelines” on page 8 for tips on
improving video quality.
•making sure the camera is plugged in and the
blue LED is on.
•pressing and releasing the pairing button quickly.
Do not press and hold the pairing button.
the camera won’t pair with the monitor
17
Download from Www.Somanuals.com. All Manuals Search And Download.
GuarDIan LuLLaBoo sCreen DesCrIPtIon
oVerVIeW
This section describes the Guardian Lullaboo firmware screens in detail. It provides a path to the
screen being viewed.
GuarDIan LuLLaBoo settInGs sCreen
From the pop-up menu, tap the
following icons as they appear
on the screens:
This screen should display:
The Guardian Lullaboo Settings screen highlights the Camera Setup option as the default.
main Screen
Sub Screens
Pairing
What it Does
Camera Setup
Pairs new cameras to the monitor.
Makes the cameras visible to the monitor.
Brightens or darkens the video of that camera.
Camera On
Brightness
Recorder Setup Motion Detection
Records when something moves in front of the camera
and continues recording for 2 minutes. Motion detection is
on by default.
Email Alert
Sends email notification to user’s PC and/or mobile device
when Motion detection senses motion in front of the
camera.
Schedule Record
Set up a schedule for pre-determined recording times and
lengths.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
main Screen
Sub Screens
What it Does
Network Setup Internet Setup
Select the type of internet connection to be used. (DHCP
is most common.)
Security Code
Set a security code for remote access.
Network Information Displays information about your network and the monitor’s
unique DID number.
Alarm Setup
Period
Set a length of time for the alarm to sound.
Select a melody to play for the alarm.
Melody
System Setup
Power Saving
Temporarily turns off the LCD after the system is idle for 2
minutes to conserve power.
Screen Auto Lock
Time
Locks the screen from further activity until the screen is
unlocked.
•Clock Alarm. Set an alarm.
•Time Setting. Set the current time.
•Timer. Time countdown.
Format Storage
System Upgrade
Language
Formats/erases all the data on the SD card.
Upgrades the monitor firmware.
Changes default language setting for the monitor (English,
French, or Spanish).
Quick Tips
NA
Provides a list of 10 common questions.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setuP sCreen
PaIrInG
Your camera is paired to the monitor at the factory
to channel 1. When you add a new camera to your
system, you have to pair it to the monitor (that is, you
have “introduce” the camera and monitor so they can
communicate).
some thinGs to knoW about PairinG cameras:
•
If a camera is already assigned to the selected channel, the monitor overwrites that camera link
with the new one.
•
Only pair one camera at a time! The monitor links to the first camera it detects. If two or more
cameras are in pairing mode, you can’t control which camera the monitor will detect first.
From the pop-up menus, tap
the following icons as they
appear on the screens:
This screen should display:
1. Tap the camera image you want to pair. A processing icon displays for a 60 second countdown.
2. Press and release PaIrInG on the camera’s side. The 60 second countdown will end when the
pairing process is complete.
3. The system will automatically adjust the camera on screen.
Use this procedure to move a camera from one channel to a different channel.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera on
When you add a camera to your system, pair the camera with the monitor and the system will
automatically turn it on. An X indicates a camera that is turned off; a check mark indicates the
camera is turned on.
From the pop-up menu, tap the
following icons as they appear
on the screens:
This screen should display:
1. Tap the camera you want to turn on.
2. A check mark replaces the X under the camera.
3. To turn a camera off, tap the camera icon. An X replaces the checkmark and indicates the
camera is turned off.
Although the camera is turned off, it is still powered. The monitor will not receive video
signals from that camera.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
briGhtness
From the pop-up menu, tap the
following icons as they appear
on the screens:
This screen should display:
Tap the camera whose brightness level you want to change. The default brightness is 0, and the
range is from -2 through 2.
reCorDer setuP sCreen
Use the recorder setup screen to select between
motion detection, email alert, or schedule record
.
motion detection
From the pop-up menus, tap
the following icons as they
appear on the screens:
This screen should display:
1. Each camera’s motion detection sensitivity can be set independently. You can set the motion
detection level to Off, Low, or High. Tap on the camera to cycle through these choices.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Tap to return to the main motion detection screen.
The Motion Detection default setting is to Low. The system records for 2 minutes when
motion is detected.
email alert
The Guardian Lullaboo firmware can notify you when cameras detect motion by sending you an
e-mail alert. The e-mail alert contains information such as the time that motion was detected and
by which camera. In order to enable this e-mail alert, you must enter both incoming and outgoing
email addresses.
Uniden recommends you use Gmail to set up as the outgoing email server.
The outgoing email server (SMTP server) is responsible for sending out the email notification to tell
users when motion is detected (Motion Detection must be activated).
The incoming mail server (Email To) receives the email notification sent from the SMTP server. The
user must be able to receive email on a Windows PC or on mobile devices (such as an iPhone, iPad,
or Android smartphone or tablet) to receive e-mail alerts from the system.
When you receive an email alert, you can view live video from your Windows PC, an iPhone, iPad,
Android smartphone or Andriod tablet through apps. Free apps are available through the iTunes
App store or the Android Market.
From the pop-up menus, tap
the following icons as they
appear on the screens:
This screen should display:
23
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Tap enable to activate Email Alert or disable to deactivate it.
2. Tap on the smtP server field. A keyboard screen displays.
keyboard from alphabetical characters to numbers/symbols and back again by tapping the
field to the left of the space bar. Tap Return. The email alert screen displays again.
4. Repeat the previous step for the Password field. Tap Return.
The password entered here must be the same password as the password for the outgoing
email account.
5. Repeat Step 3 for the email to field. Only one incoming email account will be accepted by the
Guardian Lullaboo firmware. The incoming email account can be different from the outgoing
email account.
6. Tap ok to save the settings, then tap
<
to return to the previous screen.
If you are using Gmail as the outgoing SMTP server, check SSL/TLS and use the data in the following
table:
24
Download from Www.Somanuals.com. All Manuals Search And Download.
For Gmail
Smtp.gmail.com
SMTP Server
SMTP Port
Username
Enter this.
Enter this.
465
Enter your gmail address in full,
including @gmail.com.
Password
Email to
XXXXXXXXXX
Enter the password for this
gmail account.
Enter the email address where
you want the alerts sent.
schedule record
You can schedule up to 5 recording sessions. You are limited to the size of the SD card for how long
a total recording time you have. These recording sessions must begin and end within a single 24-
hour period. They cannot cross into the next day.
From the pop-up menus, tap
the following icons as they
appear on the screens:
This screen should display:
1. Tap the camera number you want to record (1 - 4). You can select up to all 4 cameras to record.
2. Set the recording start time. Tap the hour and number boxes separately and use the uP and
DoWn arrows to scroll through the times.
3. Tap the am/Pm block to toggle between them.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Tap on the blank Date box. The recorder setup
calendar screen displays.
5. Tap on the date you want the recording.
The previous screen displays.
6. Set up the recording and then tap saVe. You can select
another recording session to schedule, return the
previous screen, or return to the live screen.
Scheduled recordings are broken up into 15 minute
file sizes. For example, if you record a 50 minute event, you will have three 15-minute
recordings plus one 5-minute recording.
clear a scheduled recordinG
1. Access the schedule record screen.
2. Tap recording you want to clear (1-5). The screen displays the settings for that schedule.
3. Tap CLear. The screen resets to the default values for that recording slot.
netWorK setuP sCreen
The network setup screen allows you to select your internet connection type and security code. You
can also display system default configuration.
From the pop-up menu, tap the following icons This screen should display:
as they appear on the screens:
26
Download from Www.Somanuals.com. All Manuals Search And Download.
internet setuP
1. Tap Internet Setup icon to display the internet setup screen.
2. Tap on your selection and fill in the fields
requested. Tap oK
.
Selection
Fields
Static IP
•IP Address
•Subnet Mask
•Default Gateway
•DNS Server
DHCP
None
3. Tap oK at the system reboot prompt. The network
setup screen displays.
DCHP is the most common connection. Your router will automatically assign an IP address
to your Lullaboo system. Static IP is for those that have the ability to specify an IP address
for the Lullaboo system.
security code
Set up your security code to limit who can have access to the system from a remote location.
1. Tap Security Code icon to display the security code screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. If you have not entered a security code, you can enter it here. If you have previously entered a
security code, your current security code displays.
The default security code is set to 123456. We recommend that you change this code to
something you will remember. You will need the code to access your video from a remote
device such as a smart phone or PC.
3. Tap on the Change Code field. A keyboard screen displays.
4. Enter your security code. You can switch the keyboard from alphabetical characters to
numbers/symbols and back by tapping the field to the left of the space bar. Tap Return. The
security code screen displays again.
You must enter a security code to monitor your video from a PC or other device.
5. Tap oK on the system reboot prompt. The network setup screen displays.
6. Turn your Lullaboo monitor off then back on for the security code change to take effect.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
netWork information screen
1. Tap the Network Information icon to display the network information screen.
2. Tap the arrow to return to the previous screen.
The DID is a unique code specific to your monitor and is required (along with the security code)
to gain remote access to your camera over the internet. The information in the DHCP setting is
assigned to your monitor from your home router.
aLarm setuP sCreen
From the alarm setup screen, you can:
•
•
Set the length of time the alarm sounds.
Select a melody for the alarm.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Period screen
This selection allows you to select the length of time the alarm will sound for the alarm clock.
1. Tap Period. The change siren duration screen displays.
2. Tap the duration you want the siren to last (2, 10, or 30 seconds) or tap None to turn sirens off.
3. Tap to return to the previous screen.
melody
This selection allows you to select a melody for the siren.
1. Tap Melody. The change siren melody screen displays.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
2. A check mark appears on the melody you tap and the monitor briefly plays a sample of the
selected melody.
3. Tap the BACK arrow to return to the previous screen.
sYstem setuP sCreen
PoWer savinG
When you turn on Power Saving mode, the monitor goes into sleep mode (LCD turns off) after it is
idle for 2 minutes. Press the PoWer button once to reactivate the monitor. (Default = Disable).
If a motion detection event or scheduled recording begins, the LCD turns back on.
1. Tap Power Saving icon, then Enable to activate Power Saving mode (Default = Disable).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2. A check mark appears on your selection.
3. Tap to return to the previous screen.
screen auto lock
When you turn on Auto Lock mode, the monitor will automatically enter screen lock mode after it
has been idle for 2 minutes. Auto Lock disables the touchscreen and removes the icons from the
display.
When the auto-lock feature has been enabled and your Live screen is locked, just tap the PoWer
button once to unlock the screen and return to normal touch screen operation. At any time from
the Live screen, you can manually lock the system by tapping the PoWer button, whether or not the
auto-lock feature has been enabled.
1. Tap Screen Auto Lock. The activate touch screen operation auto-lock screen displays.
2. Tap your selection; a check mark displays.
3. Tap the BaCK arrow to return to the previous screen.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
time
The time screen lets you set up clock alarms, set the system time, and set a timer.
From the pop-up menu, tap the
following icons as they appear
on the screens:
The following screen displays:
clock alarm
This feature operates as an independent alarm clock. It does not affect the operation of live video or
recording video.
1. Tap
to display the clock alarm screen.
2. Tap on an alarm button (total of 5 to select from).
3. Tap on the hour block. The uP/DoWn arrows move to the hour block. Set the hour.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Tap on the minute block. The uP/DoWn arrows move to the minute block. Set the minute.
5. Tap on am/Pm to toggle between the two.
6. Tap saVe when you are finished.
time settinG
This screen contains fields to set the Month, Day, Year, Hour, Minute, and AM/PM.
1. Tap
to display the time setting screen.
2. Tap on each field to set it. The uP/DoWn arrows shift to that field. Use uP/DoWn to set the field.
3. Tap on the AM/PM block to switch between the two.
4. Tap saVe when you are finished.
It is important to set the correct time to ensure that the recorded video files and the
scheduled record times are correct.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
timer
This feature operates as an independent timer. It does not affect the operation of live video or
recording video.
1. Tap
to display the timer screen.
2. Tap on each field to set it. The uP/DoWn arrows shift to that field. Use uP/DoWn to set the field.
3. Tap start to begin the timer. When the timer reaches 00:00, an alarm beeps until you tap oK
.
format storaGe
When using an SD card other than the one provided, it is highly recommended that you format the
card using these procedures. Formatting any SD card deletes all files on that card.
From the pop-up menu, tap the
following icons as they appear
on the screens:
The Format Storage screen displays:
The Lullaboo system supports up to a 32 GB SD card.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Tap on start; a warning statement displays.
2. Tap oK to proceed to format storage or tap CanCeL to discontinue and return to the previous
screen.
3. The system indicates success or failure.
sYstem uPGraDe
To upgrade the Uniden Guardian Lullaboo firmware, you will need to download the file from the
directory of the SD card used in your Lullaboo baby monitor.
From the pop-up menu, tap the
following icons as they appear
on the screens:
This screen should display:
LanGuaGe
chanGinG the lanGuaGe
English is the default language. When you change languages, all system settings default to the
original factory settings. You will have to reenter any specialized settings.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
From the pop up menus, tap
the following icons as they
appear on the screens:
This screen should display:
1. Select a language to change to that language. The restore default settings screen displays.
2. Tap oK to continue with the language reset. The system will reboot in about 5 seconds. If you
do not want to reset the language, tap CanCeL and return to the previous screen.
Changing the language will reboot the system and ask you to recalibrate the touch screen.
Follow the instructions on the screen.
quICK tIPs
The Quick tips screen provides more detail into 10 common areas. Tap on a subject to display the
information.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
remote aCCess
oVerVIeW
Uniden’s Lullaboo baby monitor lets you view live video from your Windows® PC, an iPhone®, iPad®,
or AndroidTM smartphone or tablet. Free apps are available through the iTunes® App Store or the
Android Market.
This system uses P2P remote access technology and does not require configuring your router, port
forwarding or a remote DDNS service.
The number of remote viewers is determined by the amount of “available upload
bandwidth” on your home network. Each remote viewer requires ~350kbps of bandwidth
on the network.
sYstem requIrements
•
•
•
•
•
Microsoft® Windows XP, Vista, or Windows 7
Internet Explorer® 8 or greater.
iPhone® or
iPad® or
AndroidTM smartphone or tablet
ConneCtInG to the Internet
The cradle charges your monitor as well as provides an internet connection. When you are
connected to the internet, live video will not display on the monitor.
For this procedure, the AC adapter must be connected to the cradle and not to the monitor.
Reconnect the AC adapter if necessary.
1. Connect one end of the Ethernet cable into the back of the cradle (“Getting to Know the
Monitor and Camera” on page 6).
38
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connect the other end into your primary router (typically, the router from your service
provider).
3. Place cradle maximum distance away from your router.
4. Insert the monitor into the cradle. A screen asks if you want to connect to the internet or to
only charge the monitor.
5. Tap connect. The Internet Connection Status Indicator appears on the upper left of the LIVE
screen indicating that the system is connected to the internet.
While the system is connected to the internet:
► The LIVE screen display rate may reduce to 2 - 3 frames per second.
► The touch screen’s control operation will be limited. To return to full control of the touch
screen, disconnect from the internet. Tap on the Pop Up menu and then select charge only
.
6. When you connect remotely to the monitor, the Internet Connection Status Indicator shows
that remote view is in progress.
ConneCtInG to the Intranet (home netWorK)
When the monitor is placed in the cradle and “charge only” is selected, you can still access your live
video from a PC or smart phone as long as those devices are also connected to the same network
as the monitor. For example your smart phone is connected to your home network via WiFi. In this
case, live video will still be displayed on the monitor as well as on the smart phone.
DoWnLoaDInG anD usInG the aPPs
anDroIDTM
doWnload
You can use a Google® AndroidTM smart phone or tablet with your system to remotely connect to
and view live camera video. Follow these steps to download, add, and use the app.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
1. From your AndroidTM smart phone or tablet
device, search the Android Market for uniden
Guardian
.
2. Download and install this app to your device.
3. Launch the app; select add to add your system
information to the app.
4. Enter a name for your system in the system name
field.
5. Enter the same DID code from the back of your
Lullaboo monitor in the did field
.
6. Enter the same security code that you set on your
Lullaboo monitor in the security code field.
7. Select save
.
8. Select the system you wish to view.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
aPP oPeration
When you open the APP on your Android phone, the image displayed on the main screen is the last
camera image, captured automatically, from your previously established session.
Tap to add an additional Guardian system.
Tap to enter System Setup page.
Tap to refresh the system.
Tap to enter the APP Information page. The screen displays the
APP version number and the API version number. Tap OK to exit.
Main screen
If you have multiple systems, scroll down and tap on the system image you want to view.
To View Video:
1. Select a system.
2. Select a camera from the drop-down menu.
3. View video.
You can turn your device sideways and go to a
horizontal view.
4. Tap return to stop the video and enter the system page.
To Take Snapshots from Video:
Two icons display on the screen - Snapshot and Return.
Snapshot icon. Tap to take a picture.
Return icon. Tap to return to the Main screen
41
Download from Www.Somanuals.com. All Manuals Search And Download.
IPhone®
In a similar fashion to the Android smart phone, you can use the Apple® iPhone® smart phone or
iPad® tablet with your Lullaboo system to remotely connect to and view camera videos. Follow
these steps to download the Uniden Guardian iPhone® App and set it up to work with your
Lullaboo.
doWnload
1. From your iPhone® or iPad®, go to the iTunes® App
Store and search for uniden Guardian
.
2. Download and install this App to your device.
3. Launch the app; select settings then aDD to add your
system information to the App.
4. Enter a name for your system in the system name field.
5. Enter the same DID code from your Lullaboo monitor in the
did field
.
6. Enter the same security code that you set on your Lullaboo
monitor in the security code field.
7. Tap save
.
When you tap save, the video streams automatically with
Camera 1 selected by default.
aPP oPeration
When you open the APP on your iPhone or iPad, several icons display on the bottom task bar.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Tap to add an additional Guardian system.
Tap to enter System Setup page.
Tap to refresh the system.
Tap to enter the APP Information page. The screen displays the
APP version number and the API version number. Tap OK to exit.
Main screen
If you have multiple systems, scroll down and tap on the system image you want to view.
to vieW video:
1. Select a system.
2. Select a camera from the drop-down menu.
3. View video.
You can turn your device sideways and go to a
horizontal view.
4. Tap return to stop the video and enter the system page.
to take snaPshots from video:
Two icons display on the screen - Snapshot and Return.
Snapshot icon. Tap to take a picture.
Return icon. Tap to return to the Main screen.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
soLVInG ProBLems
If you have any trouble with your system, try these simple steps. If you are still having a problem
with your camera, check the manual that came with your camera. If you still have a question, call
our Customer Care Line; see “Customer Care” on page 2.
If…
try..
•Increasing the sensitivity of the motion sensor (see page 20).
•Checking the settings on the Record screen (see page 18).
The motion sensor won’t
respond to movement.
•Decreasing the sensitivity of the motion sensor (see page 20).
•Refer to “Placement Considerations” on page 8.
The motion sensor goes off
when there’s nothing there.
•The video files play with a Quicktime® player. Download this free
•Video will play in players such as Windows Media® Player if an
H.264 CODEC plug-in is installed.
I can’t play my video clips
in another program
I schedule a recording,
save the schedule, and the
recording does not happen
at the scheduled time.
•Ensure that the system time is set to the current time.
•Make sure that the SD card is inserted into the monitor and there is
still memory available on that card.
•Making sure the camera is plugged in and the blue LED is on.
•Making sure the camera is paired to the correct channel.
•Re-pairing the camera and monitor.
•Moving the camera closer to the monitor; it might be out of range.
•Make sure the camera setting is turned on in Camera Setup (see
“Camera On” on page 21).
The camera’s signal status
icon shows no bars
The camera’s signal status
icon shows one or two bars
or the video quality is poor
See “General Guidelines” on page 8 for tips on improving video
quality.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
If…
try..
•Making sure the camera is plugged in and the blue (Power) LED is
on and the yellow (Pairing) LED is flashing.
•Pressing and releasing the pairing button quickly. Do not press and
hold the pairing button.
The camera won’t pair with
the monitor
When I power up my
monitor and camera for the
first time, it seems to be on
but there is no picture on
the screen
•If the Power Saving feature has been turned on, the monitor’s LCD
screen will power off. Tap poWEr to turn the LCD back on.
I have my regular Live
screen but there are no
icons.
•tapping poWEr on top of the monitor. Screen lock may be on and
tapping poWEr will unlock the screen.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
aDDItIonaL InFormatIon
ProDuCt sPeCIFICatIons
radio Frequency transceiver
RF Frequency
2.4 GHz
Modulation
GFSK
Spread spectrum
Anti Interference
Frequency Hopping
Clean Channel Dynamic Select
Selectable camera channel
Data rate
4
2 Mbps
Transmitting range
500 feet (152 meters) in an open area (line of sight)
Image Specification
Output Image resolution 480 X 272, 320 x 240 (QVGA)
Image processing
Exposure
H.264
Auto
Auto
White balance
System Specifications Camera
monitor
Weight
4.1 oz (118 g)
3.2 x 2.9 x 0.8” (90 x 49 x 20 mm)
G403: 7 oz (198 g)
5 x 3 x 0.9” (132 x 79 x 24 mm)
Dimension
Operating temperature
Battery charging temp.
Input voltage
+14° F (-10° C) to 122° F (+50° C)
0° C (32° F) to +45° C (113° F)
100-240 V AC @ 60 or 50 Hz
46
Download from Www.Somanuals.com. All Manuals Search And Download.
System Specifications Camera
Operating voltage
monitor
5 V DC @ 1 Amp
650 mA max
Power consumption
Low light solution
Low light sensitivity
Picture sensor
Lens
12 IR LEDs, 1 Low light sensor
1-8 lux
OV7725 1/4’ Color CMOS
F3.6mm H:53 V:40
Lithium-Polymer Battery Warning
•
•
•
•
•
•
This equipment contains a rechargeable lithium-polymer battery.
Do not charge the battery in temperatures below 32° F (0° C) or higher than 113° F (45° C).
Do not open or mutilate the battery.
The rechargeable batteries contained in this equipment may explode if disposed of in a fire.
Do not short-circuit the battery.
Do not charge the rechargeable battery pack used in this equipment with any charger other
than the one designed to charge this battery pack as specified in the owner’s manual. Using
another charger may damage the battery pack or cause the battery pack to explode.
CAUTION! Rechargeable Batteries Must Be Recycled or Disposed of Properly.
recycling and Disposal Information
• Do not dispose of electronic devices or any of their components (especially batteries and LCD displays) in
your municipal trash collection.
• Consult your local waste management authority or a recycling organization like earth911.com to find an
electronics recycling facility in your area.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for
recycling.
FCC Compliance Information
Part 15 Compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to
Part 15 of the FCC rules and ETSI (EN) 300328. These limits are designed to provide reasonable protection
against harmful interference in residential installations. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television equipment reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Move the equipment away from the monitor.
• Plug the equipment into an outlet on a circuit different from that to which the monitor is connected.
• Consult the dealer or an experienced radio/television technician for additional suggestions.
CautIon! any changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
rF exposure Information
The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm
(7.9”) from all persons and must not be collocated or operating in conjunction with any other antenna or
transmitter.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
IC Compliance Information
radio equipment notice
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met. Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device. “Privacy of communications may not be ensured when using this
device”.
Ce Compliance Information
Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage Directive (73/23/
EEC); R&TTE(1999/5/EC) issued by the Commission of the European Community. Compliance with these
directives implies conformity to the following European Norms:
• EMC: EN 301 489
• LVD: EN 60950
• Radio: EN 300 328
three-Year Limited Warranty
Important: evidence of original purchase is required for warranty service.
WARRANTOR: Uniden America Corporation (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants,
for three years, to the original retail owner, this Uniden Product to be free from defects in materials &
craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 36
months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not
maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired
by someone other than an authorized Uniden service center for a defect or malfunction covered by this
warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured
by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for this
product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while
this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit & return it to
you without charge for parts, service, or any other cost (except shipping & handling) incurred by warrantor
49
Download from Www.Somanuals.com. All Manuals Search And Download.
or its representatives in connection with the performance of this warranty. Warrantor, at its option, may
replace the unit with a new or refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE
PRODUCT & IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so
the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other rights which vary
from state to state. This warranty is void outside the United States of America & Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the
owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its
original packaging). Disconnect the battery from the Product & separately secure the battery in its own
separate packaging within the shipping carton. The Product should include all parts & accessories originally
packaged with the Product. Include evidence of original purchase & a note describing the defect that has
caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service
4700 Amon Carter Blvd. Fort Worth, TX 76155
© 2013 Uniden
America Corporation
All rights reserved
Printed in China
50
Download from Www.Somanuals.com. All Manuals Search And Download.
|