XSA955
AND
XSA965
Digital Answering
Machine
900 MHz
Caller ID
10 Number
Memory
Plus
Rocket Dial
Quick Start
Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
This page is a very condensed version of the Owners Manual. It is designed to allow you to get your phone installed and operating
asquicklyaspossible-howeveritdoesnotattempttoexplainanyoftheadvancedfeaturesoftheXSA955andXSA965.
Start
Here!
New Zealand
Installing the Base Unit
Power point
l
Plug the telephone cord into the Base
Unit, then into the telephone socket on
thewall.
Make sure the AC
Adaptor/s remains
switched ON at all
times. Use only
the Uniden AC
Australia
Tel Line Adaptor
(Not supplied)
l
Plug the AC Adaptor cord into the Base
Unit, then the AC Adaptor into the wall
powerpoint.
Press the AC Adaptor cord into the
curvedrecessundertheBaseUnit.
Raisetheantenna.
AC adaptor
Telephone cord
Adaptor/s supplied
with this unit.
l
l
Installing the Charge Cradle
(XSA965Only)
l
PlugtheACAdaptorcordintotheChargeCradle,
thentheACAdaptorintothewallpowerpoint.
Power point
AC adaptor
Page ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Handset Battery
l
Pressthebatterycoverandslideitoff.
l
Connectthebatteryplugtothesocketattherearof
thebatterycompartment.
l
l
Makesuretheplugistherightwayround.
The RED and BLACK battery wires must match the
RED and BLACK printed on the phone case for the
plugtofitproperly.
l
Pressfirmlyuntilitclicksintoplace.
l
Positionthebatteryinthecompartmentandslidethe
coverintoplace.
You must charge
the batteries
continuously for
20 hours before
using the phone.
XSA965only-Repeatprocessforsecondhandset.
l
Place one handset on the main base and place the
other handset in the extra charging cradle. It does
not matter which handset is placed on the main
baseandextrachargingcradle.
Page iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call
XSA965Only:RegistrationofDualHandset
IMPORTANT
l
After fully charging the handsets, remove the handset from the extra charging cradle and
place it on the main base. (The status LED will begin to flash indicating registration is
occurring).
l
Waitforatleast5secondsbeforeremovingtheextrahandsetfromthemainbase.
Theregistrationhasbeencompleted,andyourdualhandsetcordlessphoneisreadyforuse.
l
l
Pickupthehandsetandpress
OR
Dialthephonenumber-thenpress
Tohangup-press
.Dialthephonenumber
OR
PlacethehandsetontheBaseUnit.
Answering a Call
l
l
l
HandsetontheBaseUnit:
Removethehandsetfromthebaseandspeak(AutoTalkOn).
HandsetofftheBaseUnit:
Pickupthehandset,press
Tohangup-press
OR
andspeak.
PlacethehandsetontheBaseUnit.
Page iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Answering System
Toturntheansweringsystemon:
Answer
l
Press
-thepre-recordedgreetingwillplayandyoursystemisreadytoacceptcalls.
on
Torecordyouroutgoingmessage:
l
l
l
l
Pressandhold
. Afteryouhearashorttone,releasethekey.
"RecordGreeting"isannouncedfollowedbyalongtone.
Recordyourgreetingwhilespeakingwithin15cmofthebase.
Whenfinished,press
Your outgoing
message can be
recorded up to 30
seconds long.
again.
Using the Answering System
Toplayyourmessage:
l
Press -newmessagesplayfirst.
Torepeatamessage:
Press duringplaybackofmessages.
l
Toskipamessage:
l
Press
message.
anytime during playback to skip to the next message. The system beeps and begins to play the next
Todeletemessages:
Deleteonemessage:
l
Press
duringamessage.Thesystembeepsandbeginstoplaythenextmessage.
l
Deleteallmessages:
Afterreviewingallmessages.Press
,"Todeleteallmessages,pressdeleteagain"isannounced.
Press
again.
Page v
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL TRANSFER
- XSA965 Only
To have the ability to transfer calls from one handset to the other handset:
Initial Setup:
(Important: XSA965 Only -Please make sure you have registered your dual handset - refer to instructions on
page iv).
TO TRANSFER CALLS
To transfer your call from handset 1 to handset 2:
transfer
l
Press
The call is placed on hold on the first handset, while handset 2 begins to ring. The call is transferred when
.
l
the 2nd handset is answered.
Repeat the process to transfer the call back to handset 1. Calls can be transferred from either handset.
If the transferred
call is not picked
up after 5 minutes,
the call will be
l
l
transfer
Ifthetransferredcallisnotanswered,youcanretrievethecallbypressing
or
.
disconnected.
Page vi
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Installation & Safety.....................................................................................i
Quick Start Guide
Installation ......................................................................................ii
Contents.......................................................................................................vii
Getting Started
Controls and Functions ...................................................................1
Welcome..........................................................................................3
Included in your Package................................................................4
Mounting the Base Unit on a wall....................................................5
Installing the Beltclip ......................................................................5
Headset Installation.........................................................................5
Battery Maintenance .......................................................................6
Using your Phone
Caller ID
Caller ID .......................................................................................16
When the Telephone Rings ...........................................................16
Viewing the Caller ID Message List................................................17
Deleting Information from the Caller ID List................................17
Deleting a Caller ID Message ........................................................17
Deleting all Caller ID Names and Numbers..................................17
Calling a Party from the Caller ID List ..........................................18
Dial Edit........................................................................................18
Stored Caller ID Messages in Memory Dialing..............................18
Answering System
Answering System.........................................................................19
Turning the Answering System On/Off..........................................19
Setting the Time............................................................................20
Setting a Personal Security Code (PIN).........................................20
Setting the Ring Time....................................................................21
Setting the Message Record Time .................................................21
Announce Only Feature ................................................................22
Setting the Message Alert Tone......................................................22
Setting Your Outgoing Message (Greeting)....................................23
Setting the Base Ringer Volume....................................................24
Adjusting the Speaker Volume Level.............................................24
Using Your Answering System.......................................................25
Playing Your Messages ..................................................................25
Repeating a Message.....................................................................25
Skipping a Message.......................................................................26
Deleting a Message .......................................................................26
Voice Memo ..................................................................................27
Remote Access Away From Home.................................................28
Turn on the Answering System Remotely......................................29
Notes.............................................................................................30
Remote Operation Card................................................................31
Troubleshooting........................................................................................33
Warranty.....................................................................................................34
Notes ..... .....................................................................................................35
Setting Menu Options......................................................................7
Autotalk...........................................................................................7
Pop Up Name...................................................................................7
Making and Receiving Calls.............................................................8
Adjusting the Handset Ringer Volume and Earpiece Volume...........9
Redial ..............................................................................................9
Travelling Out-of-Range...................................................................9
Selecting a Different Channel........................................................10
Find Handset.................................................................................10
Call Waiting/Flash..........................................................................10
Memory Dialing
Storing Phone Numbers................................................................11
Making Calls with Memory Dialing................................................12
Memory Dialing from Talk Mode...................................................12
Chain Dialing.................................................................................12
Editing a Stored Name and/or Phone Number..............................13
Erasing a Stored Name and/or Phone Number .............................13
Call Transfer..................................................................................14
Rocketdial
Rocketdial......................................................................................15
Storing and Editing the Rocketdial ................................................15
Making Calls with Rocketdial.........................................................15
Deleting the Rocketdial..................................................................15
Page vii
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
1. Handset antenna
2. Handset earpiece
3. LCD display
cid/
menu
4.
5.
6.
7.
8.
key
1
1
/flash key
/< key
/pause key
key
redial
2
3
2
3
9. Handset microphone
and ringer speaker
Dual Handset
10.
11.
12.
13.
14.
15.
16.
Volume up key
key
key
10
10
4
5
4
5
11
12
13
11
12
13
Volume down key
/> key
key
/channel key
14
15
16
14
6
7
8
6
7
pause
delete
pause select delete mem
redial channel transfer
17. Handset charging contacts
15
18
redial select channel mem
select
18.
19.
/channel key (XSA965 only)
/delete key (XSA965 only)
19
transfer
9
9
17
17
XSA955
XSA965
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
21. Telephone line jack
22. AC Adaptor input
23. Handset retainer clip
21
22
set
24.
25.
26.
27.
28.
/ringer key
key
repeat/rew key
key
find
memo
30
key
23
24
29. Base charging contacts
30. Base speaker
31
32
volume
set/
ringer
menu
33
34
35
status
delete
play/stop
31.
32.
/
Speaker volume keys
8 8
25
26
menu
key
36
37
38
repeat/rew
skip/ff
33. Status LED
27
28
find hs
memo
greeting
answer
on/off
34. Message counter display
900MHz
Dual Handset
35.
Play/Stop key
mic
39
40
36.
skip/ff key
29
37. Answer /off key
on
38.
greeting
key
39. Microphone
40. Base Antenna
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME
Congratulations on your purchase of this Uniden cordless telephone. This Product is designed for reliability, long life and
outstanding performance utilising the latest in 900MHz Technology.
FEATURES
l
l
l
l
l
l
l
l
l
l
Multiple Handsets (up to 2, XSA965 only)
900MHz SCR Technology (Sound Clarity and Range)
Caller ID Display*
Digital Telephone Answering Device
Pop Up Name - Caller Name Identification #
30 Caller ID Memories
Alphanumeric Memory Dialing
Super Chat Battery
Maxi-Sound - Extra Loud Handset Volume Control
Rocketdial - One Touch VIP Dial
l
l
l
l
l
l
l
l
l
LCD Back Light
Wall or Desk Mountable
Page/Find Handset Feature
AutoTalk
32 Digit Redial
Pause
Flash Button (Call Waiting Compatible)
2 Type Tone Ringer
2 Step Ringer Volume Control
NOTES
*
Caller ID feature only works if you subscribe to the service by your local telephone company.
There is usually a fee for this service.
#
Pop Up Name feature only works if you subscribe to your telephone company Caller ID service and
record names into your phones memory.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
INCLUDED IN YOUR PACKAGE
Make sure you have received the following items in the package. If any of these items are
missing or damaged, contact the Uniden Parts Department.
NOTES
Super Chat
Rechargeable Battery
2nd Super Chat
Rechargeable Battery
(XSA965 only)
Dual Handset
pause select delete mem
redial channel transfer
Telephone Cord
Handset
Belt Clip
2nd Belt Clip
(XSA965 only)
2nd Handset
(XSA965 only)
AC Adaptor
volume
set/
ringer
menu
status
delete
play/stop
8
8
charge
repeat/rew
skip/ff
find hs
memo
greeting
answer
on/off
Charge
Cradle
(XSA965 only)
900MHz
mic
2nd AC Adaptor
(XSA965 only)
Owners Manual
Main Base
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING THE BASE UNIT ON A WALL
DirectWallMounting
Youcanmountyourphonedirectlytothewall.Beforedoingthis,considerthefollowing:
•
Avoid electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws
intothewall.
•
•
•
Mountyourphonewithindistanceofaworkingphonejack.
Makesurethewallmaterialiscapableofsupportingtheweightofthebaseandhandset.
Usescrewswithanchoringdevicessuitableforthewallmaterialwherethebaseunitwillbeplaced.
TOP
3mm
1. Inserttwomountingscrewsintoawall(withtheirappropriateanchoringdevice),85mmapart.
Allowabout3mmbetweenthewallandscrewheadsformountingthephone.
2. PlugtheACadaptorintotheBaseUnitandthenintoapowerpoint.
3. PlugthetelephonecordintotheBaseUnitandthenintothetelephonesocketonthewall.
4. Alignthemountingslotsonthebasewiththemountingpostsonthewall.
5. Thenpushinanddownuntilthephoneisfirmlyseated.
85mm
If you are using
an optional
headset, you
must still use the
handset keypad
for phone
operations.
INSTALLING THE BELTCLIP
35mm
Toattachthebeltclip:
Insertthebeltclipintotheholesoneachsideofthehandset.Pressdownuntilitclicks.
Toremovethebeltclip:
Pullbothsidesofthebeltcliptoreleasethetabsfromtheholes.
Headset Jack
HEADSET INSTALLATION
Yourphonemaybeusedwithanoptionalheadset.Tousethisfeature,
simplyplugtheheadsetintotheheadsetjack.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY MAINTENANCE
Batteryusetime(percharge)
XSA955
•
10hourscontinuoususe
•
20dayswhenhandsetisinthestandbymode
XSA965
•
10hourscontinuoususe
•
12dayswhenhandsetisinthestandbymode
WhentheBatterychargebecomeslow
If the phone is not in use, 'Low Battery' flashes and none of the keys will operate. If the phone is in use, 'Low Battery'
flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for
charging.
Use only the
genuine Uniden
Super Chat
•
•
Youcannotoverchargethebattery.
Youmayreturnthehandsettothechargeraftereachcallorwhenthebatteryislow.
Battery supplied
with your phone.
Replacement
Super Chat
Cleaningthebatterycontacts
To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil
eraseraboutonceamonth.Donotuseanyliquidsorsolvents.
Batteries are
available
through the
Uniden Parts
Department.
GenuineHandsetBatteries
The high quality rechargeable batteries supplied with your phone will perform for up to two years or more. In
ordertoenjoythebestperformancefromyourphone, werecommendyoureplaceyourbatterieseverytwoyears
withagenuineUnidenbattery.
SPECIAL
NOTE
Simplyvisitourwebsitetoorderareplacementbattery:
UnidenAustraliaPTYLimited
ServiceDivision
www.uniden.com.au
UnidenNewZealandLimited
ServiceDivision
www.uniden.co.nz
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING MENU OPTIONS
Options available include AutoTalk and Pop Up Name.
AUTOTALK
AutoTalk allows you to answer the phone without pressing the
button. If the phone rings when Autotalk is on, simply
remove the handset from the base and the phone automatically answers the call. If the phone rings when Autotalk is off, you
must press to answer the call.
POP UP NAME
XSA965 only:
Functions will
need to be
programmed in
both handsets
separately.
If the displayed Caller ID telephone number is exactly the same as a number stored in memory, then the stored name will
also be displayed with the caller ID telephone number.
To change your AutoTalk and Pop Up Name (Name Tag)
. The following screen appears.
cid/menu
1. Press and hold
1
2
Auto Talk :On
Name Tag :On
2. Use and
change. Press
3. Press and return the handset to the base unit. The handset returns to the standby mode.
or a number key (
to toggle between 'On' and 'Off' for AutoTalk and Pop Up Name (Name Tag).
and
) to move the pointer to the selection that you would like to
1
2
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING AND RECEIVING CALLS
Handset on Base
Handset Off Base
To answer a call
To make a call
Pick up the handset (Autotalk on) or pick
Press
or
, any number,
up the handset and press
1. Pickupthehandset.
(Autotalk off).
(Autotalk on).
1. Press
.
2. Press
.
2. Listenfordial tone.
3. Dial thenumber..
OR
3. Listen for the dial tone.
4. Dial thenumber..
OR
Dial the number then
press
Refer to page 7
"Autotalk" to turn
on/off the Autotalk
feature.
.
1. Pickupthehandset.
2. Dial thenumber, then press
.
To hang up
To redial
Press , or return the handset
to the base or extra charging
cradle (AutoStandby).
1. Pickupthehandset.
1. Press
.
2. Press
3. Listen for the dial tone.
4. Press
.
2. Listenforthedial tone.
3. Press
Press
.
.
OR
OR
1. Pickupthehandset.
2. Press , thenpress
, thenpress
.
.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE HANDSET RINGER VOLUME AND EARPIECE VOLUME
Handsetringertoneandvolume
Press
combinations. The telephone will keep this setting for all future calls.
or
in standby mode to select one of five ringer tones and volume
Earpiece Volume
Pressing
telephone will keep this setting for all future calls.
or
during a call will change the earpiece volume of the handset. The
Ringer Mute
You can temporarily mute the ringer tone. When the handset is off the base and the
XSA965 only:
Settings will need
to be
phone is ringing,press
incoming call.
. The ringer tone will return to normal with the next
programmed in
both handsets
separately.
REDIAL
The
1. Press
2. Press
key redials the last number dialed. The redialed number can be up to 32 digits long.
.
. The last number dialed will be called.
TRAVELLING OUT-OF-RANGE
During a call, noise will increase if you move your handset too far from your base unit. If the range limit
ofyourbaseunitisexceeded,yourcallwillterminatewithinfiveminutes.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone, you can manually change the phone's channel for clear
operation. This function works only when the phone is in use.
•
•
XSA955: Press
XSA965: Press
/channel. 'Scanning' appears on the display, indicating the phone is changing to another channel.
/select. 'Scanning' appears on the display, indicating the phone is changing to another channel.
channel
volume
set/
ringer
menu
FIND HANDSET
status
To locate the handset (while it's off the base), press
beeps for 60 seconds.
on the base. The handset
delete
play/stop
XSA955 Only:
Paging is cancelled by pressing any key or when the handset is returned to the base.
repeat/rew
skip/ff
You must
subscribe
XSA965 Only:
Both handsets will ring when paged. Paging is cancelled by pressing any key on either
handset.
find hs
memo
greeting
answer
on/off
through your
local telephone
company to
receive Call
Waiting services.
CALL WAITING/FLASH
If the call waiting tone sounds during a call:
AUSTRALIA: Press
/flash, then
to switch between callers.
NEW ZEALAND: Press
/flash to switch between callers.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
STORING PHONE NUMBERS
Memory Dialing allows you to dial a number using just a few key presses. Your
XSA955/XSA965 stores up to 10 names/numbers in each handset.
Memory Store
Store Name
In memory
1
2
dialling operation,
you must press
a key within 30
seconds or the
phone will return
to standby.
1. Press and hold
2. Press or
you would like to store the number.
3. Press . 'Store Name' is displayed on the screen and a cursor flashes indicating
, 'Memory Store' is displayed.
0
9
or enter a number (
-
) to select the memory location where
that the display is ready for a name to be entered.
Edit Memory 1
Delete Memory 1
Go Back
If the screen shown to the right appears, the selected memory location is already stored. Then
you must either edit the entry in this location, delete the entry in this location (page 13)
or select "Go Back" to choose another location.
4. Use the Alpha Numeric keys to enter a name. The name cannot exceed 14 characters.
•
•
•
•
Use
Use
and
to delete characters as needed.
to delete all the characters.
If a name is not required, go to step 5.
, 'Store Number' is displayed. The cursor flashes indicating that the
to move the cursor to the desired location.
Press and hold
The pause
Store Number
Store Number
8002971023
feature is useful
for long distance
calling, credit
card dialling or
sequences of
numbers that
require a pause
between digits.
5. Press
display is ready for the number to be entered.
6. Use the number keys to enter the phone number. The phone number cannot exceed 20
digits. Use the
display shows a 'P'. Each pause counts as one digit and represents a two second delay of
time between the digits. Use to delete digits as needed.
7. Press , you will hear a confirmation tone, and the following screen appears. Memory
/pause to enter a pause in the dialing sequence if required. The
Memory 1 Stored
Memory Store
storage is complete. For example, if you store a number into the memory location
number 1, the display shows 'Memory 1 Stored'. After about 2 seconds,
'Memory Store' is displayed. Repeat steps 2-7 to store more numbers.
1
2
UNIDEN AUS
<Memory 2>
8. Press
to return to standby mode.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CALLS WITH MEMORY DIALING
Memory dialing from Standby Mode.
1. Press
2. Press
1
2
3
UNIDEN AUS
JOE BLOGGS
JOHN DOE
. The handset displays your programmed memory locations.
0
9
or
would like to dial.
, or enter the number (
-
) to select the memory location you
Talk
0800123456789
3. Press
dialed.
'Talk' and the volume settings are displayed. Then the displayed number is
DisplayaProgrammedNumber
Press
Use
.Thehandsetdisplaysyourprogrammedmemorylocations.
and totogglebetweenthenamesandnumbersdisplayed.
1
2
3
UNIDEN AUS
JOE BLOGGS
JOHN DOE
1
2
3
0800123456789
5452930
6567983
XSA965 only:
Numbers stored
in one handset
can not be
accessed from
the other.
MEMORY DIALING FROM TALK MODE
1. Press
2. Press
3. Enteranumber(
. 'Talk' and the volume setting appears.
.
0
-
9 )toselectthememorylocationofthedesiredphonenumber.Theselectedphonenumberisdisplayed.
Thenthenumberisdialed.Ifthememorylocationselecteddoesnothaveanumberstored,aseriesofbeepsissounded.
4. Tohangup,press
.
CHAIN DIALING
On certain occasions after dialing a number, you may be required to enter an access code such as your account number for
phone banking. You can enter this number into a memory location for later use by doing the following:
0
1. Store the access code into one of the memory locations (
2. Dial the party or service main number.
-
9 ) following the steps on page 11.
0
9
3. When you need to enter the special number, press
followed by the memory location (
-
).
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING A STORED NAME AND/OR PHONE NUMBER
1. Press and hold
. 'Memory Store' is displayed.
, or enter a number ( ) to select the memory location you would like to edit.
2. Press
3. Press
4. Press
or
. The edit screen is displayed.
again to select 'Edit Memory X'. The cursor flashes indicating that the display is ready for the name
-
0
9
to be edited
5. Use the number keys,
6. Press . The cursor flashes indicating that the display is ready for the number to be edited.
7. Use the number key, /pause and to edit the phone number. The phone number cannot exceed 20 digits.
If you don't want to change the phone number, skip this step.
,
, or
to edit the name. To edit only the phone number, skip this step.
8. Press . You hear a confirmation tone. Memory Storage is complete. For example, if you store a name and number
into memory location number 1, the display shows 'Memory 1 Stored'.
9. Press
to return to standby mode.
ERASING A STORED NAME AND/OR PHONE NUMBER
1. Press and hold
. 'Memory Store' is displayed.
0
9
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
or
or enter a number (
-
. The edit screen is displayed with the memory location number that you have selected.
) to select the memory location you would like to erase.
to move the pointer down to 'Delete Memory X'.
.
to move the pointer to 'Yes'.
or
. A confirmation tone is sounded, and 'Memory X Deleted' is displayed.
8. After about 2 seconds, 'Memory Store' is displayed. You may delete the information in another memory location
(return to step 2) or press to return to standby mode.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL TRANSFER
- XSA965 Only
To have the ability to transfer calls from one handset to the other handset:
Initial Setup:
(Important: XSA965 Only -Please make sure you have registered your dual handset - refer to instructions on
page iv).
TO TRANSFER CALLS
To transfer your call from handset 1 to handset 2:
transfer
l
Press
.
l
The call is placed on hold on the first handset, while handset 2 begins to ring. The call is transferred when
the 2nd handset is answered.
Repeat the process to transfer the call back to handset 1. Calls can be transferred from either handset.
l
l
transfer
Ifthetransferredcallisnotanswered,youcanretrievethecallbypressing
or
.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
ROCKETDIAL
You can store your most frequent dialed number in the Rocketdial location. The Rocketdial allows you to dial a number with one
keypress(thereisnoneedtopress
The Memory
Location for
.Thephonewillautomaticallydialthenumberstored).
Rocketdial is
independent
from the memory
location used for
memory dialling.
Store Number
STORING AND EDITING THE ROCKETDIAL
1. When the phone is in standby mode, press and hold
displayed.
. 'Store Number' is
Edit Number
Delete Number
Go Back
If the screen shown to the right appears, there is a number already stored. Press
select 'Edit Number'.
2. Store the number by following step 6 under "Storing Phone Numbers" on page 11.
to
Store Number
800
3. Press
. A confirmation tone sounds. Memory storage is complete. 'Number
Stored' is displayed.
If the Rocketdial
does not have a
stored number,
the handset will
beep rapidly and
the phone will
not dial.
MAKING CALLS WITH ROCKETDIAL
Whenthephoneisinthestandbymode, simplypress
memorylocationisinstantlydialed.
. ThenumberstoredintheRocketdial
Edit Number
Delete Number
Go Back
DELETING THE ROCKETDIAL
1. When the phone is in the standby mode, press and hold
. The following display appears.
Delete Number?
Yes
No
2. Press
3. Press
4. Press
5. Press
to select 'Delete Number'.
. The following display appears.
to move the pointer to 'Yes'.
or
. 'Number Deleted' is displayed and a confirmation tone
Number Deleted
sounds. After 2 seconds, the handset returns to standby mode.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID
You must subscribe to a Caller ID service to use these facilities. When the telephone rings, the Caller ID feature allows you to
view the caller's name and phone number on the display before you answer the telephone. The handset displays the phone
number of the incoming call, the name, time and number of calls. Additionally, you can dial the displayed number and store
the information for memory dialing.
WHEN THE TELEPHONE RINGS
When the Caller ID message is received, the display shows the caller's phone number along with the date and time. The
incoming call information is stored in the Caller ID record. If the Caller ID service includes the callers name, the caller's
name appears on the display (currently not supported in Australia or New Zealand).
Thedateandtimereceived
Caller'sname
Caller'sphonenumber
21/12 12:30PM
JIM STATEN
0295979035
If you answer a
call before the
Caller ID
Herearesometypicaldisplays:
message is
received (i.e:
before the second
ring), the Caller
ID message will
not appear.
21/12 12:30PM
Mobile
0295979035
Incomplete Data
When the mobile phone
number and date are received.
When invalid data is
received.
21/12 12:30PM
Unavailable
21/12 12:30PM
Private
When a private number is
received.
When an unknown number is
received.
21/12 12:30PM
Payphone
When a call is coming from a
payphone (Australia only).
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWING THE CALLER ID MESSAGE LIST
TheCallerIDliststoresinformationforupto30incomingcalls-evenunansweredcalls.
cid/
In Caller ID
menu
1. Press
2. Press
3. Press
4. Press
.Thesummaryscreenappears.Thescreenshowsthenumberofnewmessagesandtotalmessages.
todisplaythelatestCallerIDmessage.
operation, if no
key is pressed for
more than 30
seconds, an error
tone sounds and
the telephone
returns to the
standby mode.
toseethenextmessage.Orpress
toreturntostandbymode.
toseethepreviousmessage.
DELETING INFORMATION FROM THE CALLER ID LIST
The XSA955/XSA965 stores up to 30 messages. If the phone receives the 31st message, the oldest one in the list is automatically
deleted.CallerIDdatacanalsobedeletedmanually.
DELETING A CALLER ID MESSAGE
If you get an
cid/
menu
1. Press
. Display the message to be deleted from the
or
Whenthepointerisat'Yes':
incoming call or
page, the deleting
operation is
cancelled so you
can answer the
call or page.
CallerIDlistbypressing
.
A tone sounds and the Caller ID message is deleted.
ThenextCallerIDmessageisthendisplayed.
Whenthepointerisat'No':
2. Press
3. Press
4. Press
.
or
or
toselect'Yes'or'No'.
.
ThedisplayreturnstoCallerIDmessage.
DELETING ALL CALLER ID NAMES AND NUMBERS
cid/
menu
1. Press
2. Press
3. Press
4. Press
.
.
Whenthepointerisat'Yes':
A tone sounds all stored Caller ID messages are
deleted.
Whenthepointerisat'No':
Thedisplayreturnstothesummaryscreen.
or
or
toselect'Yes'or'No'.
XSA965 only:
Caller ID
numbers need to
be deleted from
each handset
separately.
.
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLING A PARTY FROM THE CALLER ID LIST
YoucanplaceacallfromtheCallerIDlist.
New Zealand:
Calling from the
Caller ID list
may not be
cid/
menu
1. Press
2. Press
.Selectthephonenumberthatyouwanttodialbypressing
.Thedisplayedphonenumberdialsautomatically.
or
.
functional.
DIAL EDIT
You can temporarily edit the Caller ID number that is displayed by pressing . A cursor appears in the display. Press
movethecursorleft,makeyourchangesandthenpress .ThiswillnotchangethenumberintheCallerIDlistmemory.
to
STORED CALLER ID MESSAGES IN MEMORY DIALING
You cannot store
a Caller ID
message if no
phone number
appears in the
message.
MessagesshownintheCallerIDlistcanbestoredinmemorydialing. Usingtheincomingcallinformation(i.e., CallerIDlist), the
phonenumberofthepartyontheCallerIDcanbestoredinmemory.
cid/
menu
1. Press
2. Press
3. Press
4. Press
5. Press
.SelectthephonenumbertobestoredfromtheCallerIDlistbypressing
.
or
.
0
9
or
orenteranumber(
-
)toselectthememorylocationtobestored.
.Aconfirmationtonesoundsandthenumberisstoredinmemory.ThedisplayreturnstotheCallerIDlist.
toreturntostandbymode.
If a message has already been stored in the selected memory number location, a confirmation screen is displayed. Press
select'Yes'.Press toreplace.ThedisplayreturnstotheCallerIDlist.
to
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING SYSTEM
You can use your answering systems to leave a voice memo message for others who use the phone, or to announce a special
message to callers when you're away from your phone.
FEATURES
l
l
l
l
Digital Tapeless Recording
Call Screening
Time and Day Announcement
Toll Saver
l
l
l
l
13 minutes of Recording Time
Selecting Outgoing Messages
Remote Message Retrieval
Voice Memo
DigitalTapelessRecordingallowsyoutoquicklyreview, saveordeletethemessagesyouchoose. Youwillneverhavetoworryabout
a tape wearing out, jamming or resetting improperly. The Integrated Answering System is easy and convenient to use, but please
readthroughalloftheinstructionscarefully.
volume
set/
ringer
menu
TURNING THE ANSWERING SYSTEM ON/OFF
answer on
status
1. To turn the answering system on, press
. The current greeting message will be
delete
play/stop
played and you will hear a confirmation tone. The message counter displays the number
of messages stored in memory. If the display flashes, then there are new messages
waiting for you.
answer on
2. To turn the answering system off, press
and the message counter display will no longer be illuminated.
/off. 'Answer Off', is announced
repeat/rew
skip/ff
find hs
memo
greeting
answer
on/off
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE TIME
menu
1. Press
. 'Time' is announced along with the current time. The message counter displays the
current numbers [1] through [7] indicating the day of the week.
2. Press
or
displayed on the base.
until the correct day is announced. The numbers [1] through [7]are
volume
set/
ringer
menu
set
3. Press
4. The current recorded hour is announced. Press
setting. The numbers [1] through [12] are displayed on the base as each hour is announced.
.
status
or
until you hear the correct hour
delete
play/stop
set
Press and hold
'Skip/ff' or
'Repeat/rew'
to quickly scroll
through the
5. Press
6. The current recorded minute is announced. Press
setting. The numbers [00] through [59] are displayed on the base as each minute is announced.
.
or
until you hear the correct minute
repeat/rew
skip/ff
set
7. Press
8. The current recorded AM or PM setting is announced. Press
correct AM or PM setting. The message counter displays [A] or [P].
.
or
until you hear the
find hs
memo
greeting
answer
on/off
numbers on the
display.
set
9. Press
. A confirmation tone sounds, then the announcement 'Time' and the time and day are
announced for your review. The base LED displays the number that corresponds with the day of
the week.
10. Press
to exit menu options.
SETTING A PERSONAL SECURITY CODE (PIN)
To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-
99). To select a PIN, perform the following steps:
menu
1. Press
2. Press
3. Press
twice. 'Security Code' and the current PIN code is announced as it is displayed on the base.
or until the desired number appears.
to select the PIN code. A confirmation tone sounds, then the announcement 'Security Code' and the new
The PIN code is
set to '80' when
you purchase the
XSA955/XSA965.
set
PIN code is announced.
4. Press to exit menu options.
5. Record your PIN code on pages 31 and 35 for future reference.
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE RING TIME
volume
set/
The ring time setting allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer after six, nine
or twelve rings. Setting (Toll Saver), the answering system picks up after six rings if you have
new messages, and after nine rings if there are none. This way, if you make a long distance call
to check your messages, you can hang up after the seventh ring to avoid billing charges.
ringer
menu
status
delete
play/stop
menu
1. Press
three times. You hear 'Ring Time' and the current ring time ([6] 6, [9] 9,
repeat/rew
skip/ff
[12] 12, [ ] Toll Saver), and it is displayed on the base.
2. Press or until the desired ring time appears.
3. Press set /ringer to select the new ring time, a confirmation tone sounds, then the
find hs
memo
greeting
answer
on/off
announcement 'Ring Time' and the new ring time is announced.
to exit menu options.
4. Press
When using the
Announce Only
feature, you may
want to change
your outgoing
message, if the
message prompts
the caller to leave
a message. The
prerecorded
SETTING THE MESSAGE RECORD TIME
volume
set/
ringer
You have three record time options. The options '1 minute' or '4 minutes' set the
duration for recording incoming messages. 'Announce Only' answers the call with the
preset greeting or your personal greeting but prevents the caller from leaving a message.
menu
status
delete
play/stop
menu
1. Press
four times. 'Record Time' is announced and the current recording time
([1] 1 minute, [4] 4 minutes, [A] Announce Only and it is displayed on the base.
2. Press
3. Press
or until the desired time appears.
to select the new recording time, a confirmation tone sounds, then the
message changes
automatically.
repeat/rew
skip/ff
set
announcement 'Record Time' and the new recording time is announced.
4. Press to exit menu options.
find hs
memo
greeting
answer
on/off
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
ANNOUNCE ONLY FEATURE
The 'Announce Only' feature plays a prerecorded outgoing message, "Hello, no one is
available to take your call. Please call again," but it will not allow the caller to leave a message.
SETTING THE MESSAGE ALERT TONE
volume
set/
ringer
menu
The Message Alert feature lets you know that you have new messages by sounding a short
beeping tone. If the Message Alert has been set to 'On' and a new message has been received,
the alert tone will sound every 15 seconds. Set the Message Alert tone to 'On' or 'Off' by
using the following procedure:
status
delete
play/stop
menu
1. Press
five times. 'Message Alert' is announced and the current setting
([OF] Off or [On] On), and it is displayed on the base.
repeat/rew
skip/ff
2. Press
3. Press
or
to select the new setting, a confirmation tone sounds, then the
to select.
set
find hs
memo
greeting
answer
on/off
announcement 'Message Alert' and the current setting you have selected is
announced. When the first new message is received, the beeping tone will begin to
sound.
4. Press
/stop to exit menu options.
l
l
To quickly turn 'Message Alert' tone off, press any key on the base unit and the
tone will automatically deactivate. To reset, go back into the menu setup mode.
When all new messages are played using the remote playback feature (page 28) the
'Message Alert' tone will automatically deactivate.
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING YOUR OUTGOING MESSAGE (GREETING)
When you receive a call, the answering system automatically plays either a preset message or
your own greeting.
PresetMessage
The following message is prerecorded, "Hello, no one is available to take your call. Please leave a
messageafterthetone."
RecordingAPersonalOutgoingMessage(Greeting)
greeting
1. Press and hold
tone is heard. [- - ] flashes on the message counter. Release key.
. 'Record Greeting' is announced and a confirmation
2. Startrecordingyourmessage. Youhave30seconds, andthemessagecounterstartstocount
down[30]to[1]everysecond.
greeting
3. When you are finished recording your greeting, press
sounds, and then your greeting plays back for you.
, a confirmation tone
To delete the
personal greeting,
press
MEMORY DIALING FROM TALK MODE
ChoosingBetweentheTwoOutgoing Messages
during the
greeting
greeting
Press
. Then press
again when the outgoing message is played. This
announcement
and the system
announces
switches between the prerecorded greeting or the personal greeting. After finishing playing
back the message, a confirmation tone is heard.
"Greeting has
been deleted."
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE BASE RINGER VOLUME
You have three ringer options. One allows you to turn the ringer off. The other two are volume
levels.
When you have
set the base
ringer to off and
the handset is on
the base, you will
still hear the
ringer from the
handset.
set
1. Press
/ringer. You hear the ringer at the current volume level ([Hi] High, [Lo] Low,
[OF] Off) (if you set the base ringer volume to off, 'Off' is announced) and it is displayed
volume
onthebase.
set
option appears.
set/
ringer
menu
2. Press
/ringer while the current ring volume is being played until the desired ringer
status
3. Thesystemdisplaysnewringervolume.
delete
play/stop
ADJUSTING THE SPEAKER VOLUME LEVEL
repeat/rew
skip/ff
When you press
at 9 or
at 0, an error tone
sounds.
You can adjust the volume of the Answering System speaker by pressing the 'Volume' keys on
the base. Press
find hs
memo
greeting
answer
on/off
for louder or
for softer while the base speaker is being used.
The numbers 0-9 are displayed on the base indicating the volume levels. 0 being the softest
and 9 being the loudest.
Page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR ANSWERING SYSTEM
The message counter displays the number of messages stored in memory. If the display flashes,
thentherearenewmessageswaitingforyou.Theflashingnumberrepresentsthenumberofnew
messages, not total messages. After you play all your new messages, you can then play your old
messages.
When the
answering system
is full, 'FL' is
displayed on the
base, and the
system announces
"No Remaining
Time". You should
delete some
volume
set/
ringer
menu
status
PLAYING YOUR MESSAGES
delete
play/stop
1. Press
. Thesystemannouncesthenumberofnewandoldmessages. TheLEDdisplays
the number of new messages. The day and time that each message was received is
announced after the message is played. The message counter displays the number of
currentmessagesstored.
messages so that
the system can
record new
repeat/rew
skip/ff
When all new messages have been played, a confirmation tone sounds and "End
of Messages"isannounced.Thesystemreturnstostandby.
2. After you have reviewed your new messages, you can play your old messages by again
messages.
find hs
memo
greeting
answer
on/off
pressing .Onceyouhavelistenedtoanewmessage,itbecomesanoldmessage.Theold
messageswillbeplayedintheorderinwhichtheywerereceived.
To stop playing
your messages,
REPEATING A MESSAGE
press
time.
at any
volume
set/
ringer
menu
1. While a message is being played, press
messages,press repeatedlyuntilyoureturntothemessageyouwanttoreplay.
2. Press at any time to stop reviewing messages and return to standby. The message
, to replay the message. If you have several
status
delete
play/stop
countershowsthenumberofmessagesstoredinmemory.
Toquicklyscrollbackwardsthroughamessage,pressandhold
.
repeat/rew
skip/ff
find hs
memo
greeting
answer
on/off
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
SKIPPING A MESSAGE
volume
set/
ringer
1. Press
2. Press
toreviewyourmessages.Thenumberofmessagesisannounced.
at anytime to skip to the next message. Each time is pressed, the system
to find the message
menu
scans forward one message. If you have several messages, press
youwanttoplay.
status
delete
play/stop
3. Press , atanytimetostopreviewingyourmessagesandreturntostandby. Themessage
countershowsthenumberofmessagesstoredinmemory.
repeat/rew
skip/ff
Toquicklyscrollforwardsthroughamessage,pressandhold
.
find hs
memo
greeting
answer
on/off
DELETING A MESSAGE
Tomaintainmaximumrecordingtime,deleteanyoldmessages.
When you press
you are
1. Press
2. Press
3. Aconfirmationtonesoundsafterthemessagehasbeendeleted.
toreviewyourmessages.
volume
set/
ringer
permanently
deleting the
message. Once
deleted, the
message cannot
be replayed.
menu
anytimeduringthemessagetodelete.
status
delete
play/stop
Youcanalsodeleteallthemessages.
1. Press
2. Press
."Todeleteallmessages,pressdeleteagain"isannounced.
again.Aconfirmationtonesoundsafterallthemessageshavebeen deleted.
repeat/rew
skip/ff
If you try to delete all messages without first listening to your new messages, you will hear several
short beeps followed by the announcement "Please playback all messages". This protects you
fromaccidentallyerasingmessagesyouhavenotyetreviewed.
find hs
memo
greeting
answer
on/off
Page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
volume
VOICE MEMO
The voice memo function allows the user to record messages (up to 10 minutes).
set/
ringer
menu
status
memo
1. Press and hold
confirmation tone sounds. [- -] flashes on the message counter.
. "Record memo message" is announced and a
The voice memo
function is
completely
independent of the
greeting message.
delete
play/stop
2. Start your recording.
3. When you have finished, press
memo
, or
sounds and the system returns to standby.
to stop recording. A confirmation tone
repeat/rew
skip/ff
The voice memo
messages are
recorded as
incoming
find hs
memo
greeting
answer
on/off
messages.
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE ACCESS AWAY FROM HOME
You can operate your answering system from a remote location using any touch-tone telephone. Use this
function to check for recorded messages, to play or delete messages, even to record a new greeting
message.
You must enter a
command within
15 seconds of
entering command
waiting mode or
the answering
system
automatically
hangs up and
returns to standby.
1. Call your telephone number.
2. During the greeting message, press
and enter your PIN code (Factory Setting: 80).
(See "Setting a Personal Security Code", page 20)
3. The answering system announces the current time and the number of messages stored in memory.
2
0
Then you hear "To play incoming messages, press
. For help, press
".
4. You may continue to listen to the Help Guidance, or you may select a command from the following
chart:
Command
then 1
then 2
then 3
then 4
then 5
Function
Command
then 6
then 7
then 8
then 9
then 0
Function
RepeataMessage
PlayingIncomingMessages
SkippingaMessage
DeletingaMessage
StopOperation
AnsweringSystemOn
MemoRecord/Stop*
GreetingMessageRecord/Stop*
AnswerSystemOff
HelpGuidance
*For Memo Record and Greeting Message Record function, the first time you enter the corresponding
command, it starts the Recording function. If you want to stop the recording, enter the command again.
5. After all of the Help Guidance prompts have played, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this time from the
chart.
6. When you are finished, hang up to exit the system. The answering system automatically returns to
standby.
Page 28
Download from Www.Somanuals.com. All Manuals Search And Download.
TURN ON THE ANSWERING SYSTEM REMOTELY
Ifyouhaveforgottentoturnonyouransweringsystem, youcanturnitonremotelyfromanytouch-tone
telephone.
1. Call your telephone number.
2. After 15 rings, the system will answer. A tone sounds.
3. Press
and then enter your PIN code. The answering system announces the number of
2
messages stored in memory. You hear "To play incoming messages, press
0
. For help
press
4. Press
."
then
confirmation tone sounds.
6
to turn the answering system on. You will hear the outgoing message and a
5. Hang up the phone and subsequent calls will be answered by the system.
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Page 30
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION CARD
Handywalletsizedinstructionsforeasyuseofremoteanswermachinefunctions.
Remote Operation Card - Uniden XSA955 and XSA965
Remote Operation Card - Uniden XSA955 and XSA965
Pin Code:
Pin Code:
Remote access away from home:
1. Call your telephone number.
2. During the greeting message, press
Remote access away from home:
1. Call your telephone number.
2. During the greeting message, press
and enter your PIN code.
and enter your PIN code.
3. The answering system announces the current time and the number of
messages stored in memory. Then you hear "To play incoming messages,
3. The answering system announces the current time and the number of
messages stored in memory. Then you hear "To play incoming messages,
press
2
. For help, press
0
".
press
2
. For help, press
0
".
4. You may continue to listen to the Help Guidance, or you may select a
command from the chart.
4. You may continue to listen to the Help Guidance, or you may select a
command from the chart.
*For Memo Record and Greeting Message Record function, the first time
you enter the corresponding command, it starts the Recording function. If
you want to stop the recording, enter the command again.
*For Memo Record and Greeting Message Record function, the first time
you enter the corresponding command, it starts the Recording function. If
you want to stop the recording, enter the command again.
Remote Operation Card - Uniden XSA955 and XSA965
Remote Operation Card - Uniden XSA955 and XSA965
Pin Code:
Pin Code:
Remote access away from home:
1. Call your telephone number.
2. During the greeting message, press
Remote access away from home:
1. Call your telephone number.
2. During the greeting message, press
and enter your PIN code.
and enter your PIN code.
3. The answering system announces the current time and the number of
messages stored in memory. Then you hear "To play incoming messages,
3. The answering system announces the current time and the number of
messages stored in memory. Then you hear "To play incoming messages,
press
2
. For help, press
0
".
press
2
. For help, press
0
".
4. You may continue to listen to the Help Guidance, or you may select a
command from the chart.
4. You may continue to listen to the Help Guidance, or you may select a
command from the chart.
*For Memo Record and Greeting Message Record function, the first time
you enter the corresponding command, it starts the Recording function. If
you want to stop the recording, enter the command again.
*For Memo Record and Greeting Message Record function, the first time
you enter the corresponding command, it starts the Recording function. If
you want to stop the recording, enter the command again.
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION CARD
Handywalletsizedinstructionsforeasyuseofremoteanswermachinefunctions.
Command
Function
Command
Function
then 1
then 2
then 3
then 4
then 5
then 6
then 7
then 8
then 9
then 0
RepeataMessage
then 1
then 2
then 3
then 4
then 5
then 6
then 7
then 8
then 9
then 0
RepeataMessage
PlayingIncomingMessages
SkippingaMessage
DeletingaMessage
StopOperation
PlayingIncomingMessages
SkippingaMessage
DeletingaMessage
StopOperation
AnsweringSystemOn
MemoRecord/Stop*
GreetingMessageRecord/Stop*
AnswerSystemOff
AnsweringSystemOn
MemoRecord/Stop*
GreetingMessageRecord/Stop*
AnswerSystemOff
HelpGuidance
HelpGuidance
Command
Function
Command
Function
then 1
then 2
then 3
then 4
then 5
then 6
then 7
then 8
then 9
then 0
RepeataMessage
then 1
then 2
then 3
then 4
then 5
then 6
then 7
then 8
then 9
then 0
RepeataMessage
PlayingIncomingMessages
SkippingaMessage
DeletingaMessage
StopOperation
PlayingIncomingMessages
SkippingaMessage
DeletingaMessage
StopOperation
AnsweringSystemOn
MemoRecord/Stop*
GreetingMessageRecord/Stop*
AnswerSystemOff
AnsweringSystemOn
MemoRecord/Stop*
GreetingMessageRecord/Stop*
AnswerSystemOff
HelpGuidance
HelpGuidance
Page 32
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
The status light won’t
illuminatewhenthehandset
is placed on thebase.
• Make sure the AC adaptor is plugged into the base and wall outlet
Make sure the handset is properly seated in the base.
Make sure the charging contacts on the handset and base are clean.
•
•
Move the handset and/or base to a different location away from
metal objects or appliances and try again.
The audiosounds weak
and/or scratchy.
•
• Make sure that you are not too far away from the base.
• XSA955 only - Press
/channel while on a call to change the
operating channel.
XSA965 only - Press
/channel while on a call to change the
•
operating channel.
Can’t makeor receive calls.
• Checkbothendsof thetelephonelinecordarepluggedin firmly.
• MakesuretheAC adaptoris pluggedinto thebaseandwall outlet.
• Disconnect theAC adaptor fora fewminutes, then reconnect it.
• Makesurethat you arenottoofar fromthebase.
• Chargethehandset.
The handset doesn't ring or
receive a page.
• The battery pack may beweak.Chargethebattery for20-25hours.
• The handset may betoofar away fromthebaseunit.
• Placethebaseunit away from appliances or metalobjects.
Handset number 1 or
number 2 not working
(XSA965 only)
• Place one handset at a time on the main base for 5 seconds each.
If you still havea problem.
Australia: www.uniden.com.au NewZealand: www.uniden.co.nz
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
One Year Limited Warranty
Important:
Warrantor:
Evidenceoforiginalpurchaseisrequiredforwarrantyservice.
UnidenAustraliaPtyLimitedA.B.N.58001865498
UnidenNewZealandLimited
ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty, its XSA955/XSA965 (herein after referred to as
theProduct),tobefreefromdefectsinmaterialsandcraftsmanshipwithonlythelimitationsorexclusionssetoutbelow.
WARRANTY DURATION: This warranty to the original retail owner only, shall terminate and be of no further effect 12 months after the date of original
retail sale. This warranty will be deemed invalid if the product is; (A) Damaged or not maintained as reasonable and necessary, (B) Modified, altered or
used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden. (C) Improperly installed, (D) Repaired by someone other
than an authorised Uniden Repair Agent for a defect or malfunction covered by this warranty. (E) Used in conjunction with any equipment or parts or as
partofasystemnotmanufacturedbyUniden,(F)Warrantyisonlyvalidinoriginalcountryofpurchase.
PARTSCOVERED:Thiswarrantycoversforone(1)year,theBaseUnitandHandsetonly.Allaccessories(ACAdaptoretc)arecoveredfor90daysonly.
STATEMENT OF REMEDY:Intheeventthattheproductdoesnotconformtothiswarrantyatanytimewhilethiswarrantyisineffect, thewarrantoratits
discretion, will repair the defect or replace the product and return it to you without charge for parts or service. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES
NOTINANYWAYAFFECTYOURRIGHTSUNDERTHECONSUMERGUARANTEEACT.
PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY: In the event that the product does not conform to this warranty, the Product should
beshippedordelivered,freightpre-paid,withevidenceoforiginalpurchase(eg.acopyofthesalesdocket),tothewarrantorat:
UNIDEN AUSTRALIA PTY LIMITED
SERVICE DIVISION
345 Princes Highway,
Rockdale NSW 2216
Fx (02) 9599 3278
UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION
150 Harris Road,
East Tamaki, Auckland
Fx (09) 274 4253
www.uniden.co.nz
www.uniden.com.au
CustomersinotherstatesshouldshipordelivertheProductfreightpre-paidtotheirnearestUnidenAuthorisedRepairCentre(ContactUnidenforthe
nearestWarrantyAgenttoyou).
Page 34
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Foryourfuturereference,pleasefillinthepanelbelowandattachyourPurchaseReceipt/SalesDocket.
Serial:
(found on the bottom of the product or on the box)
DateofPurchase:
Name&AddressofDealer:
PINCode:
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
© Uniden Australia Pty Limited
Uniden New Zealand Limited
Printed in China
UCZZ01389ZA
Download from Www.Somanuals.com. All Manuals Search And Download.
|