REV.2009.10.20
95 SER IES
Advanced Remote Starters & Vehicle Security Systems
THIS MANUAL COVERS THE OPERATIONS OF
THE 3295, 4295 SERIES REMOTE STARTERS
AND ALARMS
WARNING: NEVER USE AN AUTOMATIC TRANSMISSION
STARTER IN A MANUAL TRANSMISSION VEHICLE
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 3
95 SERIES
OWNERS MANUAL
IMPORTANT NOTES
1) FOR SAFETY REASONS THE OWNER/USER MUST INSTALL A CARBON
MONOXIDE DETECTOR IN THE LIVING AREA NEAR TO WHERE THE
VEHICLE IS BEING STORED OR PARKED.
2) IT IS THE SOLE RESPONSIBILITY OF THE OWNER/USER TO KEEP THE
REMOTE TRANSMITTERS AWAY FROM THE REACH OF CHILDREN AND
HANDLE WITH CARE SO THAT THE SYSTEM DOES NOT
UNINTENTIONALLY START.
3) WHEN THE VEHICLE IS PARKED IN AN ENCLOSED/PARTIALLY
ENCLOSED AREA (EX: GARAGE, CAR PORT...), BEING SERVICED (EX:
OIL CHANGE) OR THE VEHICLE IS LOANED TO AN OPERATOR NOT
FAMILIAR WITH A REMOTE STARTER, THE SYSTEM MUST BE PLACED
SERVICE/ VALET MODE.
MANUAL TRANSMISSION STARTERS
THIS MODEL IS NOT DESIGNED FOR USE IN A MANUAL TRANSMISSION
VEHICLE. DOING SO COULD RESULT IN EXTENSIVE DAMAGE TO YOUR
VEHICLE, PROPERTY DAMAGE AND POSSIBLY CAUSE SERIOUS
INJURIES OR EVEN DEATH!!
IF THIS MODEL WAS INSTALLED INTO YOUR MANUAL TRANSMISSION
VEHICLE, RETURN TO YOUR DEALER AND HAVE IT REPLACED WITH
THE CORRECT MANUAL TRANSMISSION MODEL IMMEDIATELY!!!!
NEVER OPERATE THE SYSTEM IN AN ENCLOSED OR
PARTIALLY ENCLOSED AREA!
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 4
OWNERS MANUAL
REMOTE TRANSMITTER
Basic Remote Functions
THE NEW 95 SERIES XR 2WAY HYBRID REMOTE IS USER FRIENDLY AND EASY
TO OPERATE. THE REMOTE DISPLAYS THE CURRENT STATUS OF YOUR
SYSTEM USING BOTH ICONS AND TEXT ON ITS UNIQUE LCD DISPLAY.
Basic Remote Functions
LOCK/ ARM ALARM
UNLOCK/ DISARM ALARM
OFF
1 2 3 ON
REMOTE START/ STOP
UNLOCK
PROGRAM
TRUNK RELEASE/ START STATUS
STATUS UPDATE
BUTTON #5
Basic Icon Description
ICON DESCRIPTION
1- USER MODE ICON
2- FEATURE STATUS
3- RANGE INDICATOR
4- TIMER MODE ICON
5- DISPLAY TEXT
6- PROGRAM MODE ICON
7- LOCK ICON
8- UNLOCK ICON
1
2
1 2 ON OFF
4
3
5
TEXT–
6
1
PROGRAM
7
9- START/RUN ICON
10- LOW TEMP MODE
11- TRUNK RELEASE ICON
11
10
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 5
95 SERIES
OWNERS MANUAL
QUICK VIEW CHART
DISPLAY
BUTTON PRESS
AUDIBLE
FUNCTION
1
LOCK - PRESS & RELEASE
1 BEEP
/ 1 BEEP
LOCK THE DOORS & ARM THE ALARM*
*ALARM MODELS ONLY.
LOCK
1
LOCK - PRESS & HOLD
4 SECONDS
SERIES OF
BEEPS
ACTIVATES THE PANIC MODE FEATURE.
PANIC
1
PRESS AND RELEASE
PRESS AND RELEASE
(WITHIN 2 SECONDS)
1 BEEP
PAUSE
1 BEEP
ACTIVATES THE CONSTANT LOCK OUTPUT FEATURE*
*THE LOCK OUTPUT WILL STAY ON FOR 4 SECONDS.
ACTIVATES WINDOW ROLL UP ON SELECT VEHICLES.
LOCK
1
UNLOCK
UNLOCK - PRESS & RELEASE
1 BEEP /
2 BEEPS
UNLOCK THE DOORS & DISARM THE ALARM*
*ALARM MODELS ONLY.
1
LOCK - PRESS & RELEASE
(WHILE ALARM TRIGGERED)
1 BEEP
1 BEEP
TURNS OFF THE SIREN BUT THE ALARM WILL STAY ARMED.
*ALARM MODELS.
LOCK
1
UNLOCK - PRESS & RELEASE
(WHILE ALARM TRIGGERED)
TURNS OFF THE SIREN BUT THE ALARM WILL STAY ARMED.
*ALARM MODELS.
UNLOCK
1
UNLOCK- PRESS AND RELEASE
2 BEEPS
PAUSE
1 BEEP
ACTIVATES THE DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
MAY REQUIRE ADDITION PARTS OR LABOUR. MUST BE
PROGRAMMED FOR OUTPUT TO ACTIVATE.
UNLOCK
UNLOCK- PRESS AND AN RELEASE
1
TRUNK- PRESS AND HOLD
FOR 4 SECONDS
TRUNK- PRESS & RELEASE
1 BEEP
PAUSE
3 BEEPS
ACTIVATES THE TRUNK RELEASE OUTPUT.
*DISARMS ALARM, UNLOCKS DOORS & TRUNK ICON FLASHES
WHEN REMOTE STARTED LCD WILL DISPLAY CURRENT RUNTIME.
TRUNK
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 7
95 SERIES
OWNERS MANUAL
QUICK VIEW CHART
DISPLAY BUTTON PRESS AUDIBLE
FUNCTION
1
1 BEEP
PAUSE
TONE
KEY- PRESS AND HOLD FOR
3 SECONDS TILL REMOTE BEEPS
ACTIVATES THE REMOTE CAR STARTER FUNCTION.
THE DEFAULT RUNTIME IS 15 MINUTES.
START
THEN RELEASE
IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED. THE START FAULT
WILL CLEAR THE NEXT TIME THE SYSTEM IS LOCKED OR UNLOCKED. PLEASE SEE FAULT CODE
SECTION OF MANUAL FOR MORE INFORMATION.
1
1 BEEP
PAUSE
1 BEEP
KEY- PRESS AND HOLD
WHILE VEHICLE IS RUNNING
TURNS OFF THE REMOTE CAR STARTER.
THE SYSTEM WILL AUTOMATICALLY TURN OFF AFTER THE DEFAULT RUNTIME
(15 MINUTES) HAS EXPIRED.
STOP
1
1 BEEP
PAUSE
TONE
KEY- PRESS & RELEASE
WHILE RUNNING BY STARTER
RESETS THE RUN TIME.
THIS FEATURE WILL EXTEND THE CURRENT RUNTIME WHILE THE SYSTEM IS
RUNNING BY THE REMOTE START.
EX RUN
1
1 BEEP
PAUSE
TONE
KEY- PRESS & RELEASE
WHILE RUNNING BY KEY
ACTIVATES THE IDLE MODE FEATURE.
THE VEHICLE WILL RUN FOR 15 MINUTES WHEN THE KEY IS REMOVED.
IDLE
1
2 BEEPS
MELODY
STATUS
PRESS & RELEASE
ACTIVATES THE TURBO TIMER MODE FEATURE.
TURBO
THE VEHICLE WILL RUN FOR 2 MINUTES WHEN THE KEY IS REMOVED.
(BUTTON 5) WHILE RUNNING BY KEY
1
STATUS
(BUTTON 5)
PRESS & HOLD
ENTERS REMOTE PROGRAM MODE.
SEE REMOTE PROGRAM MODE SECTION OF THE MANUAL FOR MORE DETAILS.
M-1234
*REMOTE PROGRAM MODE ALLOWS THE USER TO SET OR CHANGE DEFAULT FEATURES OF
THE SYSTEM SUCH AS TIMER MODE, PAGER MODE, VALET MODE. SEE REMOTE PROGRAM MODE
FOR MORE PROGRAMMABLE OPTIONS.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 6
OWNERS MANUAL
QUICK VIEW CHART
DISPLAY
BUTTON PRESS AUDIBLE FUNCTION
1
1 BEEP
PAUSE
1 BEEP
IF THE DOORS ARE UNLOCKED/ SYSTEM DISARMED * THE DOORS
WILL LOCK WITH NO CHIRPS. IF THE DOORS ARE LOCKED/ SYSTEM
ARMED* THE DOORS WILL UNLOCK WITH NO CHIRPS.
LOCK
PRESS AND RELEASE THE
LOCK AND UNLOCK BUTTONS
AT THE SAME TIME.
1
OR
1 BEEP
PAUSE
2 BEEPS
UNLOCK
*ALARM MODELS ONLY.
1
1 BEEP
PAUSE
TONE
PRESS AND HOLD THE
UNLOCK AND TRUNK
BUTTONS FOR 5 SECONDS
ACTIVATES THE AUXILIARY #1 OUTPUT.
THE OUTPUT WILL STAY ACTIVE FOR 4 SECONDS.
AUX 1
1
PRESS AND HOLD THE
UNLOCK AND STATUS
BUTTONS FOR 5 SECONDS
1 BEEP
PAUSE
TONE
ACTIVATES THE AUXILIARY #2 OUTPUT.
THE OUTPUT WILL STAY ACTIVE FOR 4 SECONDS
AUX 2
NOTE: THIS FEATURE MUST BE SET BY INSTALLER - REFER TO INSTALL GUIDE
THE AUXILIARY OUTPUTS ARE USED TO ACTIVATE ADDITIONAL FUNCTIONS SUCH AS WINDOW
ROLL-UP AND GAS CAP RELEASE. THESE FUNCTIONS MAY REQUIRE ADDITIONAL PARTS AND
LABOUR. SEE DEALER FOR MORE INFORMATION.
1
1 BEEP
PAUSE
TONE
LOCK
LOCK- PRESS AND RELEASE
WITHIN 3 SECONDS
SHOCK SENSOR BYPASS
THE SHOCK SENSOR WILL BE DISABLED UNTIL THE NEXT TIME THAT
THE SYSTEM IS DISARMED THEN REARMED
1
KEY- PRESS AND RELEASE
SENOFF
*ALARM MODELS ONLY
1
1 BEEP
PAUSE
1 BEEP
PRESS AND RELEASE
STATUS UPDATE
STATUS
(BUTTON 5)
DISARM
THIS FEATURE DISPLAYS THE CURRENT STATUS OF THE SYSTEM, THE
TEMPERATURE THEN THE TIME.
1
12:25PM
* IF NO TEMP SENSOR IS INSTALLED OR IF THE SENSOR HAS AN ERROR
THE TEMP DISPLAYED WILL BE -121 C.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 8
OWNERS MANUAL
SYSTEM FUNCTIONS
PRESS AND HOLD THE START BUTTON ON THE REMOTE FOR
3 SECONDS UNTIL THE REMOTE BEEPS THEN RELEASE. THE
PARK LIGHTS WILL FLASH. THE HORN (OPTIONAL) WILL
CHIRP 1 TIME.
1
P 12:45
THE REMOTE WILL BEEP AND “START” WILL BE DISPLAYED
ON THE LCD. AFTER THE VEHICLE HAS STARTED THE RUN
TIME WILL BE DISPLAYED AND REMOTE WILL PLAY THE
START TUNE.
1
START
THE HORN (OPTIONAL) WILL CHIRP AND THE PARK LIGHTS
WILL TURN ON AND STAY ON FOR THE PROGRAMMED
RUNTIME. THE REMOTE WILL FLASH THE RUN TIME THEN
TURN OFF.
1
RUN 15
PRESS & RELEASE THE TRUNK BUTTON TO CHECK THE RUN TIME.
IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED.
PLEASE SEE FAULT CODE SECTION OF MANUAL FOR MORE INFORMATION.
ENTER THE VEHICLE THEN INSERT THE KEY INTO THE IGNITION CYLINDER.
TURN THE KEY FORWARD TO THE ON POSITION. (TYPICALLY 2 POSITIONS)
STEP ON THE BRAKE AND THE REMOTE STARTER WILL TURN OFF AND THE
VEHICLE WILL STAY RUNNING.
*IF THE VEHICLE SHUTS OF THE KEY WAS NOT TURN FORWARD TO THE IGNITION/RUN
POSITION.
WARNING- DO NOT TURN THE KEY TO THE START POSITION WHILE THE VEHICLE IS
RUNNING BY THE REMOTE START.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 9
95 SERIES
OWNERS MANUAL
SYSTEM FUNCTIONS
PRESS AND HOLD THE START BUTTON ON THE REMOTE FOR
3-5 SECONDS OR UNTIL VEHICLE SHUTS OFF. THE PARK
LIGHTS WILL TURN OFF AND THE HORN (OPTIONAL) WILL
CHIRP 2 TIMES.
1
STOP
THE REMOTE WILL BEEP AND “STOP” WILL DISPLAYED ON
THE LCD.
PRESS AND RELEASE THE START BUTTON (KEY) WHILE
RUNNING WITH KEY. THE PARK LIGHTS WILL FLASH AND THE
HORN (OPTIONAL) WILL CHIRPS 2 TIMES.
THE REMOTE WILL BEEP AND DISPLAY THE RUN TIME.
REMOVE THE KEY THEN EXIT VEHICLE. THE VEHICLE WILL
CONTINUE TO RUN FOR THE PROGRAMMED RUNTIME.
1
RUN 15
1
PRESS AND RELEASE THE START BUTTON WHILE THE
REMOTE STARTER IS ACTIVE. THE PARK LIGHTS WILL FLASH
AND THE HORN (OPTIONAL WILL CHIRP 1 TIME.
RUN 4
1
THE REMOTE WILL PLAY THE START TUNE AND THE RUN
TIME WILL RESET TO THE DEFAULT SETTING.
RUN 15
PRESS AND RELEASE THE STATUS BUTTON WHILE RUNNING
WITH THE KEY. THE PARK LIGHTS WILL FLASH AND THE HORN
(OPTIONAL) WILL CHIRPS 2 TIMES. THE REMOTE WILL BEEP
AND DISPLAY “TURBO”. REMOVE THE KEY THEN EXIT VEHICLE.
THE VEHICLE WILL CONTINUE TO RUN FOR 2 MINUTES.
1
TURBO
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 10
OWNERS MANUAL
SYSTEM FUNCTIONS
PRESS & RELEASE
ARM SYSTEM / LOCK DOORS
PRESS AND RELEASE THE LOCK BUTTON ON THE REMOTE
TRANSMITTER. THE PARK LIGHTS WILL FLASH AND THE
HORN (OPTIONAL) WILL CHIRP 1 TIME.
1
P 12:45
THE REMOTE WILL BEEP 1 TIME AND “LOCK” WILL BE
DISPLAYED ON THE LCD SCREEN.
1
THE DOORS WILL LOCK AND THE ALARM WILL ARM*
*ALARM MODELS ONLY.
LOCK
THE LEDS ON THE ANTENNA START FLASHING 3 SECONDS
AFTER LOCKING. NOTE- THE LEDS CAN BE PROGRAMMED
NOT TO FLASH WHEN LOCKED.
*ON ALARM MODELS THE ALARM IS ARMED WHEN THE DOORS ARE LOCKED. THE
ALARM WILL ACTIVATE IF A DOOR IS OPENED, HOOD IS OPENED AND IT THE SHOCK
IS SENSOR IS ACTIVATED. THE REMOTE WILL DISPLAY THE TRIGGER THAT SET THE
ALARM OFF. SEE ALARM TRIGGERS FOR MORE INFORMATION.
ARM SYSTEM WITH SHOCK OFF
PRESS AND RELEASE THE LOCK BUTTON THEN WITHIN 4
SECONDS PRESS AND RELEASE THE START BUTTON.
1
LOCK
THE LCD WILL DISPLAY “LOCK” WHEN THE LOCK BUTTON IS
PRESS THEN “SENOFF” WHEN THE START BUTTON IS
PRESSED.
THIS FEATURE DISABLES THE SHOCK SENSOR UNTIL THE
NEXT TIME THE ALARM IS DISARMED THEN REARMED.
OFF
1
SENOFF
*ALARM MODELS ONLY.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 11
95 SERIES
OWNERS MANUAL
SYSTEM FUNCTIONS
PRESS AND RELEASE THE UNLOCK BUTTON ON THE
REMOTE TRANSMITTER. THE PARK LIGHTS WILL FLASH
AND THE HORN (OPTIONAL) WILL CHIRP 2 TIMES.
1
P 12:45
THE REMOTE WILL BEEP 2 TIMES AND “UNLOCK” WILL BE
DISPLAYED ON THE LCD SCREEN.
1
THE DOORS WILL UNLOCK AND THE ALARM WILL DISARM*
ALARM MODELS ONLY.
UNLOCK
THE LEDS ON THE ANTENNA WILL STOP FLASHING.
*IF THE ALARM IS ACTIVATED PRESSING THE UNLOCK BUTTON ONCE WILL STOP
THE SIREN BUT THE ALARM WILL STAY ARMED. TO FULLY DISARM THE ALARM
YOU MUST PRESS AND RELEASE THE UNLOCK BUTTON A SECOND TIME.
PRESS AND RELEASE THE UNLOCK BUTTON ON THE
REMOTE TRANSMITTER. THE REMOTE WILL BEEPS 2 TIMES
1
AND THE LCD WILL DISPLAY “UNLOCK”.
THE HORN WILL CHIRP AND THE PARK LIGHTS WILL FLASH
2 TIMES THEN THE DRIVER’S DOOR WILL UNLOCK.
UNLOCK
PRESS AND RELEASE THE UNLOCK BUTTON A SECOND
TIME WITH IN 3 SECONDS TO UNLOCK THE REMAINING
DOORS. THE REMOTE WILL BEEP 1 TIME AND “D-LOCK” WILL
BE DISPLAYED ON THE LCD.
1
D-LOCK
*OPTION FEATURE. MAY REQUIRE ADDITION PARTS AND LABOUR.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 12
OWNERS MANUAL
SYSTEM FUNCTIONS
PANIC MODE
HOLD THE LOCK BUTTON FOR 4 SECONDS TO ACTIVATE THE
PANIC ALARM. THE PARK LIGHTS WILL FLASH AND THE HORN
WILL BEGIN TO CHIRP.
1
PANIC
THE LCD WILL DISPLAY “PANIC” / “ALARM” AND BEEP ON & OFF
TO EXIT PANIC MODE, PRESS ANY BUTTON ON REMOTE.
SILENT ARM/ DISARM
PRESS AND RELEASE THE LOCK AND UNLOCK BUTTONS
TOGETHER AT THE SAME TIME. THE SYSTEM WILL TOGGLE
BETWEEN LOCK/ARM & UNLOCK DISARM.
1
1
LOCK
THE PARK LIGHTS WILL FLASH BUT THE HORN WILL NOT
CHIRP AS CONFIRMATION. THE REMOTE WILL DISPLAY LOCK
OR UNLOCK DEPENDING ON THE LAST FUNCTION.
TRUNK RELEASE
PRESS AND HOLD THE TRUNK RELEASE BUTTON.
THE DOORS WILL UNLOCK, THE PARK LIGHTS WILL FLASH
AND THE HORN (OPTIONAL) WILL CHIP 2 TIMES.
1
TRUNK
THE PARK LIGHTS WILL FLASH AGAIN AND HORN
(OPTIONAL) WILL CHIRP 1 MORE TIME THEN THE TRUNK
WILL OPEN.
THE REMOTE WILL BE 2 TIMES PAUSE THEN ONCE AGAIN.
“TRUNK” WILL DISPLAY ON THE LCD.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 13
95 SERIES
OWNERS MANUAL
SYSTEM FUNCTIONS
AUX 1 OUTPUT
PRESS THE UNLOCK AND TRUNK BUTTONS FOR 3 SECONDS.
THE PARK LIGHTS WILL FLASH AND THE HORN (OPTIONAL)
WILL CHIRP 2 TIMES.
THE DOORS WILL UNLOCK THEN THE AUX 1 OUTPUT WILL
ACTIVATE FOR 4 SECONDS.
1
1
AUX 1
THE REMOTE BEEPS 2 TIMES THEN 1 TIME THEN DISPLAY
“AUX1" ON THE LCD.
AUX 2 OUTPUT
PRESS THE UNLOCK AND STATUS BUTTONS FOR 3
SECONDS.. THE PARK LIGHTS WILL FLASH AND THE HORN
(OPTIONAL) WILL CHIRP 2 TIMES.
1
1
THE DOORS WILL UNLOCK THEN THE AUX 2 OUTPUT WILL
ACTIVATE FOR 4 SECONDS.
AUX 2
THE REMOTE BEEPS 2 TIMES THEN 1 TIME THEN DISPLAY
“AUX2" ON THE LCD.
NOTE: FEATURE MUST BE PROGRAMMED ON BY INSTALLER - SEE INSTALL GUIDE
COLD START/ TEMP MODE
HOLD THE LOCK AND START BUTTONS FOR 3 SECONDS.
THE REMOTE WILL BEEP 1 TIME TO CONFIRM THAT TEMP
MODE IS “ON”. LCD DISPLAYS “ TEMP” ON.
1
1
ON
TEMP
IF TEMP MODE WAS ON THEN REMOTE WILL BEEP 1 TIME
TO CONFIRM THAT TEMP MODE IS “OFF” REMOTE WILL
DISPLAY “TEMP” OFF.
1
1
OFF
TEMP
SEE REMOTE PROGRAM MODE FOR INFORMATION ON
TEMPERATURE SETTINGS.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 14
OWNERS MANUAL
PROGRAMMING
REMOTE PROGRAM MODE
REMOTE PROGRAM MODE ALLOWS THE USER TO SET FEATURES ON OR OFF FROM
THE REMOTE TRANSMITTER. SEE THE INSTRUCTIONS BELOW TO CHANGE A USER
SETTING.
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 1 TIME AND THEN 3 TIMES.
THE DISPLAY WILL SHOW “PROGRAM” & “M-1234"
M-1234
PROGRAM
PRESS LOCK TO GO TO TIMER SETTING OR PRESS STATUS TO EXIT.
TURN TIMER MODE ON / OFF (TIMER ICON ON/OFF)
PRESS THE LOCK BUTTON TO SELECT TIMER MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
ON
TIMER
PROGRAM
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
TURN PAGER ON / OFF
PRESS THE LOCK BUTTON TO SELECT PAGER MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
ON
PAGER
PROGRAM
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
TURN VALET ON / OFF
PRESS THE LOCK BUTTON TO SELECT VALET MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
ON
VALET
PROGRAM
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
CONTINUED ON NEXT PAGE...
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 15
95 SERIES
OWNERS MANUAL
PROGRAMMING
REMOTE PROGRAM MODE
SWITCH FROM CAR 1 TO CAR 2
ON
PRESS THE LOCK BUTTON TO SELECT CAR MODE
PRESS THE UNLOCK BUTTON TO SELECT CAR 1
PRESS THE START BUTTON TO SELECT CAR 2
CAR 1
PROGRAM
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
TURN HORN CHIRPS ON / OFF
ON
PRESS THE LOCK BUTTON TO SELECT HORN MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
HORN
PROGRAM
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
TURN SHOCK SENSOR ON / OFF (ALARM MODELS)
ON
PRESS THE LOCK BUTTON TO SELECT SHOCK MODE
PRESS THE UNLOCK BUTTON TO TURN ON
PRESS THE START BUTTON TO TURN OFF
SHOCK
PROGRAM
PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
SETS REMOTE TEMPERATURE DISPLAY FROM CELSIUS
TO FAHRENHEIT
PRESS THE LOCK TO SELECT CELSIUS
PRESS THE UNLOCK TO SELECT FAHRENHEIT
ON
C/F
PROGRAM
PRESS LOCK TO GO BACK TO THE FIRST SETTING OR PRESS STATUS TO EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 16
OWNERS MANUAL
PROGRAMMING
PROGRAM FEATURES
FEATURES SUCH AS TIMER SET, CLOCK SET AND TEMPERATURE MODE ARE SET BY
HOLDING MULTIPLE BUTTONS TO ADUST.
+
TIMER SET MODE
TIMER SET MODE ALLOWS THE USER TO PROGRAM THE
REMOTE STARTER TO START AT A PRESET TIME OF THE
DAY. ONCE THE TIME IS SET THE “TIMER ON” FUNCTION
MUST BE ENABLED THROUGH THE REMOTE
PROGRAMMING MENU.
P 12:35
PROGRAM
TO ENTER TIMER SET MODE
PRESS AND HOLD THE START (KEY) AND STATUS BUTTONS ON THE REMOTE FOR
4 SECONDS. THE REMOTE WILL BEEP 1 TIME THEN THE PROGRAM AND CLOCK
ICONS TURN ON.
PRESS THE LOCK BUTTON TO CHANGE FROM HH TO MM
PRESS THE UNLOCK BUTTON TO INCREASE THE SETTING
PRESS THE LOCK BUTTON TO DECREASE THE SETTING
+
CLOCK SET MODE
TO SET THE CLOCK TIME
PRESS AND HOLD THE LOCK AND STATUS BUTTONS ON
THE REMOTE FOR 4 SECONDS. THE REMOTE WILL BEEP 1
TIME THEN THE PROGRAM AND CLOCK ICONS TURN ON.
P 12:35
PROGRAM
PRESS THE LOCK BUTTON TO CHANGE FROM HH TO MM
PRESS THE UNLOCK BUTTON TO INCREASE THE SETTING
PRESS THE START BUTTON TO DECREASE THE SETTING
PRESS AND RELEASE THE STATUS BUTTON TO EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 17
95 SERIES
OWNERS MANUAL
PROGRAMMING
SHOCK SENSOR PROGRAMMING
THE SHOCK SENSOR SENSITIVITY IS SET USING THE REMOTE PROGRAM MODE
FEATURE. ALARM MODELS ONLY.
ENTER REMOTE PROGRAM MODE
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
M-1234
PROGRAM
THE REMOTE WILL BEEP 1 TIME AND THEN 3 TIMES.
THE DISPLAY WILL SHOW “PROGRAM” & “M-1234"
ENTER SHOCK SENSITIVITY PROGRAMMING
PRESS AND RELEASE THE UNLOCK BUTTON
THE SENS LEVEL WILL BE DISPLAYED
OFF
1
SEN 5
ADJUSTING THE SENSOR SENSITIVITY
PRESS AND RELEASE THE UNLOCK BUTTON TO
DECREASE THE SENSITIVITY. THE LCD WILL SHOW
THE CURRENT SETTING. THE LOWEST (LEAST
SENSITIVE SETTING IS SEN 1.
OFF
1
SEN 3
PRESS AND RELEASE THE START BUTTON TO
OFF
1
INCREASE THE SENSITIVITY. THE LCD WILL SHOW
THE CURRENT SETTING. THE HIGHEST (MOST
SENSITIVE) SETTING IS SEN 10.
SEN 7
EXIT PROGRAM MODE
PRESS AND RELEASE THE STATUS BUTTON ON THE REMOTE TO EXIT.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 18
OWNERS MANUAL
PAGER FEATURES
ALARM TRIGGERS & PAGER MODE
WHEN THE ALARM IS TRIGGERED THE SYSTEM WILL PAGE THE REMOTE WITH THE
SPECIFIC ALARM TRIGGER. THE REMOTE WILL START TO BEEP AND THE LCD WILL
ALTERNATE BETWEEN “ALARM” AND THE “TRIGGER”
DOOR TRIGGER
1
1
THIS PAGE WOULD OCCUR IF
A DOOR WAS OPENED ON THE
VEHICLE.
ALARM
DOOR
TOGGLE
TOGGLE
TOGGLE
TOGGLE
TOGGLE
SHOCK TRIGGER
1
1
THIS PAGE WOULD OCCUR IF
THE VEHICLE WAS IMPACTED
HARD ENOUGH TO TRIGGER
THE SHOCK SENSOR.
ALARM
SHOCK
HOOD TRIGGER
1
1
THIS PAGE WOULD OCCUR IF
A HOOD WAS OPENED ON THE
VEHICLE.
ALARM
HOOD
AUX TRIGGER
1
1
THIS PAGE WOULD OCCUR IF
THE AUXILIARY SENSOR
INPUT IS TRIGGERED.
ALARM
AUX
PANIC TRIGGER
1
1
THIS PAGE WOULD OCCUR IF
THE SYSTEM WAS SET INTO
PANIC MODE. (LOCK HELD
FOR 3 SECONDS).
ALARM
PANIC
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 19
95 SERIES
OWNERS MANUAL
PAGER FEATURES
FAULT CODE VIA PAGER
IF THE STARTER FAILS TO START THE REMOTE WILL DISPLAY A FAULT CODE ON THE
LCD DISPLAY. THE TEXT “FAULT” WILL BE FOLLOWED BY THE INPUT OR CONDITION
BRAKE FAULT
1
1
THIS FAULT WOULD OCCUR IF
THE BRAKE THERE WAS AN
ISSUE WITH THE BRAKE
CIRCUIT.
FAULT
BRAKE
TOGGLE
TOGGLE
TOGGLE
HOOD FAULT
1
1
THIS FAULT WOULD OCCUR IF
THE HOOD WAS OPENED OR
THE HOOD SWITCH IS BROKE
OR OUT OF ALIGNMENT.
FAULT
HOOD
TACH FAULT
1
1
THIS FAULT WOULD OCCUR IF
THE VEHICLE HAD A START
ISSUE SUCH AS A DEFECTIVE
BYPASS MODULE.
FAULT
TACH
VALET FAULT
1
1
THIS FAULT WOULD OCCUR IF
THE SYSTEM WAS IN VALET
AND YOU PRESSED START.
FAULT
VALET
TOGGLE
TOGGLE
RANGE FAULT
1
1
THIS FAULT WOULD OCCUR IF
THE USER WAS OUT OF
OPERATING RANGE.
FAULT
RANGE
THE FAULT CODE WILL BE DISPLAYED WITH THE NEXT FUNCTION UNTIL THE SYSTEM IS UPDATED
WITH THE STATUS BUTTON.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 20
OWNERS MANUAL
PROGRAMMING
RUN TIME ADJUSTMENT
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
M-1234
PROGRAM
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
“PROGRAM” & “M-1234". PRESS START TO CONTINUE.
PRESS START TO GO TO RUN TIME ADJUSTMENT
RUN TIME ADJUSTMENT
ON
PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PRESS START BUTTON TO CHANGE TO 45 MINUTES.
PRESS STATUS TO EXIT.
RUN15
PROGRAM
TEMP START ADJUSTMENT
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
M-1234
PROGRAM
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
“PROGRAM” & “M-1234". PRESS TRUNK TO CONTINUE.
PRESS TRUNK TO GO TO TEMP ADJUSTMENT
TEMP ADJUSTMENT
PRESS THE UNLOCK OR START BUTTONS TO SCROLL
THROUGH THE SETTINGS.
ON
TEMP1
PROGRAM
TEMP 1- THE SYSTEM WILL START AT 0C / 32F
TEMP 2- THE SYSTEM WILL START AT -5C / 23F
TEMP 3- THE SYSTEM WILL START AT -15C / 5F
TEMP 4- THE SYSTEM WILL START AT -25C / 13F
*TEMP MODE IS TURNED ON OR OFF BY HOLDING THE LOCK AND START BUTTONS FOR 5 SECONDS.
THE TEMP SENSOR MUST BE INSTALLED FOR THIS FEATURE TO OPERATE.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 21
95 SERIES
OWNERS MANUAL
PROGRAMMING
VALET / EMERGENCY OVERRIDE MODE
THIS FEATURE IS USED TO DEACTIVATE THE REMOTE START AND ALARM (ALARM
MODELS ONLY) IF THE VEHICLE REQUIRES SERVICING OR IF THE REMOTE IS LOST OR
DAMAGED WHILE THE ALARM IS IN ARMED STATE.
ACTIVATING VALET MODE/ EMERGENCY OVERRIDE.
ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON
POSITION.
(LEAVE IN THE ON POSITION)
WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15
SECONDS*
*DEPENDS ON “VALET OPTIONS” PROGRAM OPTION.
THE HORN WILL CHIRP 5 TIMES AS CONFIRMATION THAT THE
SYSTEM HAS ENTERED VALET/ EMERGENCY OVERRIDE MODE.
THE LCD WILL DISPLAY VALET AFTER A FUNCTION IS PREFORMED.
THE LEDS ON THE ANTENNA WILL TURN ON SOLID.
ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON
POSITION.
(LEAVE IN THE ON POSITION)
WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15
SECONDS*
*DEPENDS ON “VALET OPTIONS” PROGRAM OPTION.
THE HORN WILL CHIRP 2 TIMES AS CONFIRMATION THAT THE
SYSTEM HAS EXITED VALET/ EMERGENCY OVERRIDE MODE.
THE LEDS ON THE ANTENNA WILL TURN OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 22
OWNERS MANUAL
DIAGNOSTICS
ALARM STATUS / DIAGNOSTICS
Diagnostic Mode is a tool that can help trouble shoot a start fault. If the remote starter fails to
start i.e.: the hood is open the park likes will flash a diagnostic code. i.e.: 5 flashes = start
attempt with hood open. If the vehicle does not remote start, count the park light flashes then
compare it to the chart below.
PARK LIGHTS
LED FLASHES
DIAGNOSTICS / STATUS
3 SLOW FLASHES
4 SLOW FLASHES
5 SLOW FLASHES
5 FLASHES
LED’s ON SOLID
SYSTEM IS IN SERVICE MODE.
NOT SET IN RESERVATION MODE “M” MODELS
START ATTEMPT WHILE IGNITION IS ON
START ATTEMPT WITH HOOD SWITCH OPEN
START ATTEMPT WITH BRAKE APPLIED
SYSTEM IS IN TACH LOCK OUT (SEE DEALER)
THREE START ATTEMPTS WITH NO START
SERIES OF 8 FLASHES
SERIES OF 5 FLASHES
SERIES OF 5 FLASHES
SERIES OF 6 FLASHES
SERIES OF 7 FLASHES
SERIES OF 8 FLASHES
6 FLASHES
7 FLASHES
8 FLASHES
The start fault must be corrected in order for the system to operate correctly. See your dealer
TROUBLE SHOOTING
When I press the start button the vehicle acts like it is going to start but does not?
This issue is most common to a problem with the bypass module. Bypass modules turn your
factory security off so that the remote starter can start the vehicle. Have your dealer reprogram
the bypass module to the vehicle.
When I unlock the doors the windows roll down or the Trunk Pops?
This issue is caused by the length of the unlock pulse. To correct this issue program the system
for short door lock pulses. (125ms)
The alarm activates 30-45 minutes after setting it?
To prevent the vehicles battery from going dead the computer will "hibernate" like your home
computer might. In some vehicles this causes the door pin input to change state. The alarm
detects the change of state and activates. A relay must be installed to isolated the door pin
circuit from the alarm.
The starter motor stays engaged to long when remote started?
Reset then relearn the Tach with the transmission in reverse. If the vehicle is tach learned when
the idle is high the starter motor may "drag". Check your ground connection if issues persist.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 23
95 SERIES
OWNERS MANUAL
WARRANTY
WARRANTY
Applicated Security Technologies, Inc. ("AST") promises to the original purchaser to repair or replace with a
comparable reconditioned model any AST control module ("module") excluding without limitation the any other
accessories, including but not limited to the antenna, remote, siren and wiring harness, proves to be defective in
workmanship or material under reasonable use during the lifetime of the vehicle it was originally installed,
provided the following conditions have been met: the module was professionally installed and serviced by an
authorized AST dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed
by an authorized AST dealer; the warranty information card was sent to AST within 10 days of the original
installation date. Any warranty returns include a warranty return authorization number issued by AST, original
bill or sale and be pre-paid shipped directly to AST. After an initial period of 2 years from the date of installation,
AST reserves the right, at its sole discretion, to charge a warranty processing fee of $30.00 USD. AST does not
cover the cost for return freight on warranty items, this cost is the sole responsibility of the purchaser.
All components included with the original packaged unit other than the module, including but not limited to the
siren, antenna and the remote transmitters, carry a one-year warranty from the date of purchase of the same.
Any warranty returns on components must include a warranty return authorization number issued by AST,
original bill or sale and be pre-paid shipped directly to AST. This warranty is non-transferable and is
automatically void if: the original purchaser has not completed the warranty card and mailed it within ten (10)
days of the date of purchase to the address listed on the card; the unit's date code or serial number is defaced,
missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; the unit has
been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not
arising out of defects in materials or construction. The warranty does not cover damage to the unit caused by
installation or removal of the unit. AST, at its sole discretion, will determine what constitutes excessive damage
and may refuse the return of any unit with excessive damage, including, but not limited to, overloading, moisture
and physical damage.
To the maximum extent allowed by law, any and all warranties are excluded by the manufacturer and each
entity participating in the stream of commerce therewith. This exclusion includes but is not limited to, the
exclusion of any and all warranty of merchantability and/or any and all warranty of fitness for a particular
purpose and/or any and all warranty of non-infringement or patents, in the United States of America and/or
abroad. Neither the manufacturer or any entities connected therewith shall be responsible or liable for any
damages whatsoever, including but not limited to, any consequential damages, incidental damages, damages
for loss of time, loss of earnings, commercial loss, loss of economic opportunity and the like. Notwithstanding
the above, manufacturer does offer a limited warranty to replace or repair the control module as describe above.
Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on
how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This
warranty gives you specific legal rights, and you may also have other rights, which vary State to State.
Download from Www.Somanuals.com. All Manuals Search And Download.
95 SERIES
PAGE 24
OWNERS MANUAL
Technical Support: [email protected]
IMPORTANT NOTES
LOCK, UNLOCK, DRIVER'S DOOR PRIORITY UNLOCK, TRUNK RELEASE AND THE
AUXILIARY OUTPUTS ARE OPTIONAL OUTPUTS. ENABLING THESE FEATURES
REQUIRES CUSTOM INSTALLATION & PROGRAMMING. THESE FEATURES MAY NOT BE
COMPATIBLE WITH SOME VEHICLES.
FOR SAFETY REASONS THE TRUNK RELEASE OUTPUT WILL NOT ACTIVATE WHEN THE
IGNITION IS IN THE ON POSITION.
NOTE: PADLOC AND 2ND CAR OPERATION ARE FEATURES THAT REQUIRE SPECIAL
PROGRAMMING.
SOME FEATURES MAY NOT BE AVAILABLE FOR ALL APPLICATIONS. CONTACT YOUR
DEALER FOR MORE INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|