U Line Beverage Dispenser 2275DWRWOL User Manual

Use and Care Guide  
®
Wine Captain Drawer Model:  
2275DWRWS, 2275DWRWOL  
2275DWRWS  
2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Table of Contents  
Introduction ...............................................................................................................................2  
Warranty Registration .......................................................................................................2  
Please Record Your Model Information ...........................................................................2  
Table of Contents .......................................................................................................................3  
Safety Precautions ......................................................................................................................5  
Safety Alert Definitions .....................................................................................................5  
General Precautions ...........................................................................................................5  
Product Features ........................................................................................................................6  
Échelon Wine Captain .......................................................................................................6  
Operation ...................................................................................................................................7  
Initial Startup .....................................................................................................................7  
Interior Lighting .................................................................................................................7  
Electronic Control Panel ....................................................................................................8  
Normal Operating Sounds .................................................................................................9  
Wine Stocking Recommendations ....................................................................................9  
Storage, Vacation, Moving ..............................................................................................10  
Product Disposal ...............................................................................................................10  
Wine Guide ...............................................................................................................................11  
Wine Selections Suggestions ...........................................................................................11  
Suggestions for Matching Food and Wine .....................................................................11  
Common Food and Wine Matches ..................................................................................11  
Cleaning and Maintenance .....................................................................................................13  
General Cleaning .............................................................................................................13  
Maintenance ....................................................................................................................13  
Adjust Drawers .................................................................................................................15  
Service .......................................................................................................................................21  
Before Calling for Service ................................................................................................21  
If Service is Required ........................................................................................................21  
Replacement Parts ...........................................................................................................21  
Troubleshooting Guide ....................................................................................................22  
U-Line Corporation Limited Warranty ....................................................................................23  
2275DWRWS, 2275DWRWOL  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
This page intentionally left blank  
4
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
3 Safety Precautions  
SHOCK HAZARD - Electrical Grounding Required.  
• Never attempt to repair or perform  
maintenance on the unit until the electricity  
has been disconnected.  
• Never remove the round grounding prong from  
the plug and never use a two-prong grounding  
adapter.  
• Altering, cutting of power cord, removal of  
power cord, removal of power plug, or direct  
wiring can cause serious injury, fire and/or loss  
of property and/or life, and will void the  
warranty.  
• PLEASE READ all instructions completely before  
attempting to install, operate, or service your  
unit.  
• Proper installation procedures must be followed  
if this unit is being initially installed, or is moved  
to a new location after being in service. An  
INSTALLATION GUIDE for your unit, providing  
complete installation information is available  
from U-Line Corporation directly, and must be  
consulted before any installation is begun. U-Line  
contact information appears on the rear cover of  
this guide.  
• This unit requires connection to a grounded  
(three-prong), polarized receptacle that has been  
placed by a qualified electrician in accordance  
with applicable electrical codes.  
• Never use an extension cord to connect power  
to the unit.  
• Always keep your working area dry.  
WARNING  
Safety Alert Definitions  
The Anti-Tip Kit must be installed on this unit  
before it is used. Never use the drawers as steps  
or as a shelf to support more than the drawers’  
contents. Serious personal injury could occur.  
Safety items throughout this guide are labeled with a  
Danger, Warning or Caution based on the risk type:  
DANGER  
CAUTION  
Danger means that failure to follow this safety  
statement will result in severe personal injury or  
death.  
• Use care when moving and handling the unit. Use  
gloves to prevent personal injury from sharp  
edges.  
• If your model requires defrosting, DO NOT use any  
type of heater to defrost. Using a heater to speed  
up defrosting can cause personal injury and  
damage to the inner lining.  
WARNING  
Warning means that failure to follow this safety  
statement could result in serious personal injury  
or death.  
IMPORTANT  
CAUTION  
• Do not lift unit by drawer handles.  
• Never install or operate the unit behind closed  
doors. Be sure front grille is free of obstruction.  
Obstructing free air flow can cause the unit to  
malfunction and may void the warranty.  
• Failure to clean the condenser every three months  
can cause the unit to malfunction. This could void  
the warranty.  
Caution means that failure to follow this safety  
statement may result in minor or moderate  
personal injury, property or equipment damage.  
General Precautions  
Use this appliance for its intended purpose only and  
follow these general precautions along with those listed  
throughout this guide:  
• Allow unit temperature to stabilize for 24 hours  
before use.  
• If your model requires defrosting, never use an  
ice pick or other sharp instrument to help speed  
up defrosting. These instruments can puncture  
the inner lining or damage cooling unit.  
• Use only genuine U-Line replacement parts.  
Imitation parts can damage the unit, affect its  
operation or performance and may void the  
warranty.  
DANGER  
RISK OF CHILD ENTRAPMENT. Before you throw away  
your old refrigerator or freezer, take off the doors  
and leave shelves in place so that children may not  
easily climb inside.  
2275DWRWS, 2275DWRWOL  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Stainless models feature a stainless steel wrap and  
sculpted stainless handles.  
4 Product Features  
• Wood overlay units feature the ability to match  
cabinetry. Handles are not included with overlay units.  
Échelon Wine Captain  
• Both drawers feature tinted thermal glass that protects  
your wines from potentially harmful light rays while  
providing a very fashionable appearance.  
Your U-Line Wine Captain is the industry’s only built-in  
under the counter two drawer wine storage unit with  
dual zone temperature control and up to 43 bottle (750  
mL size) capacity. Your Wine Captain will accommodate  
up to 24 bottles in the top drawer and up to 19 bottles in  
the bottom drawer. The bottom drawer also includes a  
wine caddy for elegant transportation and service of  
three bottles of wine. The corks remain moist, which  
keeps air from entering the bottles.  
• Wine Captain models are not recommended for  
outdoor use.  
• This Wine Captain cannot be configured for a free-  
standing installation. It must be installed as a built-in,  
under counter unit, and must be anchored to prevent  
tipping using the originally provided anti-tip kit.  
The Right Temperature for Wine  
Features and specifications are subject to change without  
notice.  
Your Wine Captain is designed to provide a temperature  
zone in each drawer, adjustable between 40 - 60°F, so the  
specific storage requirements of your finest wines can be  
satisfied.  
NOTE: Product temperatures, not air temperatures, are  
referenced above.  
Features of Échelon Wine Captain  
• An electronic control panel with digital display allows  
you to display the actual temperature in each drawer,  
and adjust the individual temperature setting to your  
personal preference. The electronic control and digital  
display provides an attractive appearance, and its  
method of control provides precise temperatures for  
storage of one or multiple types of wine.  
• An interior light will illuminate automatically in each  
drawer as it is opened, providing easy visual  
identification of the wine. However, you can easily  
select two other modes of operation:  
a. Interior lights in both drawers can be illuminated  
while the drawers are closed, providing an  
attractive display of your wine collection.  
b. A blackout/Sabbath mode (not Star K certified)  
allows you to darken both interior lights and the  
LED display, while maintaining complete  
temperature control in both drawers.  
• Automatic (cycle) defrost means maintenance-free  
defrosting.  
• Wine racks have a contoured maple front trim that  
adds a fashionable appearance to Wine Captain. The  
wood facing may be stained or replaced in its entirety  
with other woods or manufactured products (such as  
®
Corian or Sandstone).  
• Black vinyl wine racks blend with the wine bottles,  
placing greater emphasis on the wines themselves. The  
vinyl holds the wine bottles more effectively than a  
chromed or painted finish.  
• All units feature a vinyl clad steel cabinet that provides  
a rich textured look, and resists scratching, peeling and  
flaking.  
6
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interior Lighting  
5 Operation  
The interior of the cabinet can be illuminated whenever a  
drawer is opened (default mode) or illuminated for a  
four-hour period.  
The LIGHT icon (Figure 3, 5) on the control panel is used  
to change the lighting functions.  
To illuminate the interior of the cabinet for a four-hour  
period:  
1. Touch and release the LIGHT icon (Figure 3, 5) to  
switch from drawer-operated lighting control to  
continuous lighting (the °F symbol will flash briefly  
after the LIGHT icon is pressed).  
ULIN_0080_A  
Figure 2  
IMPORTANT  
2. To return to drawer-operated lighting control before  
the four-hour period is up, repeat Step 1.  
Proper air flow (Figure 2) is required for your unit to  
operate at its highest efficiently. A grille, located in  
the base of the unit, must not be blocked at any  
time, or your unit will not perform as expected.  
Initial Startup  
All U-Line units are shipped with controls that are preset.  
No initial adjustments are required.  
IMPORTANT  
U-Line recommends the unit be allowed to run  
overnight prior to loading with product.  
1
2
3
4
5
ULIN_0184_A  
Figure 3  
To turn the unit on or off, touch and hold the POWER icon  
(Figure 3, 1) on the display panel for approximately five  
seconds until the °F symbol flashes and release.  
• A small LED above the icon will illuminate to confirm  
the touch of any controller icon.  
• The display (Figure 3, 3) will show the unit set-point  
temperature when the unit is on and will show OFF  
when the unit is off.  
• Turning the unit off will override any other control  
function.  
2275DWRWS, 2275DWRWOL  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking Product Temperature  
Electronic Control Panel  
Your Wine Captain has been designed to provide two  
temperature zones within the cabinets so the specific  
storage requirements of your finest wines can be satisfied.  
NOTE: These are product temperatures, not air  
temperatures.  
1
2
3
4
5
ULIN_0184_A  
Figure 4  
The electronic control with digital display (Figure 4) is  
configured to show a single temperature continuously.  
This set-point temperature is a base number used by the  
controller to maintain the temperature zones in your unit.  
The factory default set-point temperature is 60°F in the  
top drawer and 40°F in the bottom drawer. This set-point  
temperature is used as a gauge if further temperature  
adjustments are required.  
ULIN_0093_A  
Figure 5  
To check the actual product temperature in your unit,  
insert an accurate thermometer into a plastic (non-  
breakable) bottle that is partially filled with water.  
Tighten the bottle cap securely (Figure 5).  
A DISPLAY OFF mode is available through the control  
panel. This mode allows you to control whether the  
display (Figure 4, 3) will be ON or OFF whenever the  
door is closed. The icon touch sequence that follows will  
switch between both modes:  
Place the bottle in the desired area for 24 hours. Refrain  
from opening the unit during the testing period. After 24  
hours, check the temperature of the water. If required,  
adjust the temperature control in a small increment (See  
ADJUSTING TEMPERATURE).  
1. Touch and hold the WARMER icon (Figure 4, 2), and  
within five seconds press the POWER icon  
(Figure 4, 1) three times.  
Factors which affect the internal temperatures of the  
cabinet include:  
• Temperature setting.  
2. The display will be either visible or dark when the door  
is closed.  
• Ambient temperature where installed.  
3. To return to the previous mode, repeat Step 1.  
• Number of times and length of time the door is  
opened and closed.  
Temperature Display Selection  
• Installation in direct sunlight or near a heat source.  
U-Line products supplied for 110 VAC operation have  
temperatures displayed in a default Fahrenheit (°F)  
configuration (Figure 4, 3).  
Adjusting Temperature  
IMPORTANT  
The display can easily be adjusted for either type of  
temperature display. Press and hold the LIGHT icon  
(Figure 4, 5) and within five seconds press the COOLER  
icon (Figure 4, 4) three times to change the display as  
desired.  
Adjust the set-point temperature in single  
increments, and wait 24 hours for the temperature  
to stabilize before rechecking.  
1
2
3
4
5
Temperature Display  
To display all zone temperatures:  
1. Press and hold the WARMER icon (Figure 4, 2) for  
approximately five seconds and release when the °F  
symbol in the display (Figure 4, 3) begins to flash.  
ULIN_0184_A  
Figure 6  
2. The display (Figure 4, 3) will show an individual  
reading on each drawer.  
8
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To adjust the set-point temperature:  
Wine Stocking Recommendations  
1. Press and release the WARMER icon. The top of the F  
in °F (Figure 7, 1) of the top drawer will begin to  
flash. This will allow you to adjust the temperature of  
the top drawer. In 10 seconds of inactivity, the bottom  
bar of the F in °F (Figure 7, 2) will begin to flash; this  
will allow you to adjust the temperature of the  
Specially designed wine racks allow for the proper  
horizontal storage of wine. The bottles are properly  
positioned so the wine remains in contact with the cork to  
assure that the cork does not become dry.  
Stock your unit as follows:  
bottom drawer. Adjustments to the lower drawer can  
be made immediately if the LIGHT icon is pressed.  
1
2
ULIN_0830_A  
Figure 7  
2. While the top or bottom bar of the F in °F is flashing,  
press the WARMER or COOLER icon as required to  
adjust the set-point temperature. The change will be set  
five seconds after adjusting the temperature and the  
new set-point temperature wil be displayed. Allow the  
unit to sit for 10 seconds to return to normal mode.  
ULIN_0242b_A  
Figure 8  
1. The bottom drawer should be stocked first. Open the  
drawer, and beginning at the back of the lowest rack  
work forward, staggering the bottles as shown  
(Figure 8).  
Normal Operating Sounds  
2. Stock the second rack in the same manner.  
3. Close drawer slowly.  
All models incorporate rigid foam insulated cabinets to  
provide high thermal efficiency and maximum sound  
reduction for its internal working components. In spite of  
this technology, your model may make sounds that are  
unfamiliar.  
Normal operating sounds may be more noticeable  
because of the unit’s environment. Hard surfaces such as  
cabinets, wood/vinyl/tiled floors and paneled walls have a  
tendency to reflect normal appliance operating noises.  
Common refrigeration components, and a brief  
description of the normal operating sounds they make,  
are listed below. NOTE: Your product may not contain all  
of the components listed.  
Compressor: The compressor makes a hum or pulsing  
sound that may be heard when it operates.  
ULIN_0243b_A  
Evaporator: Refrigerant flowing through an evaporator  
may sound like boiling liquid.  
Figure 9  
Condenser Fan: Air moving through a condenser may be  
heard.  
4. Repeat steps 1 through 3 to stock the racks in the upper  
drawer.  
Automatic Defrost/Drain Pan: Water may be heard  
dripping or running into the drain pan when the unit is in  
the defrost cycle.  
NOTE: After stocking, allow unit to run for 24 hours  
to stabilize product temperatures.  
2275DWRWS, 2275DWRWOL  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wine Caddy  
Storage, Vacation, Moving  
If the unit will not be used for an extended period, or  
otherwise stored, follow these steps completely:  
WARNING  
Electrical Shock Hazard. Disconnect power before  
servicing. Before operating, replace all panels.  
Failure to do so may result in death or electrical  
shock.  
1. Remove all consumable contents from the unit.  
2. Disconnect the power cord from its outlet, and leave it  
disconnected until the unit is returned to service.  
3. Clean and dry the interior of the cabinet (See CLEANING  
AND MAINTENANCE: GENERAL CLEANING).  
4. During periods of non-use, the cabinet must remain  
open to prevent the formation of mold and mildew.  
Open drawer a minimum of 2" (5 cm) to provide the  
necessary ventilation.  
ULIN_0153a_A  
Figure 10  
The bottom drawer includes a three bottle caddy  
(Figure 10) for elegant transportation and wine service.  
Product Disposal  
To access and remove the bottle caddy:  
If the unit is being removed from service for disposal,  
check and obey all Federal, State and/or Local regulations  
regarding the disposal and recycling of refrigeration  
appliances, and follow these steps completely:  
1. Open the bottom drawer fully and grasp the caddy  
handle from either side.  
2. While supporting the bottom of the caddy with one  
hand, slowly and gently pull it out from under the  
drawer.  
1. Remove all consumable contents from the unit.  
2. Disconnect power to the unit and unplug the power  
cord from its outlet.  
3. Close the drawer completely.  
To replace the bottle caddy:  
DANGER  
1. Open the bottom drawer fully.  
RISK OF CHILD ENTRAPEMENT. Before you throw  
away your old unit, remove the drawers.  
2. Support the bottom of the caddy with one hand while  
picking up the caddy. Gently slide the caddy into place  
under the drawer.  
3. Ensure that the caddy is centered, and close the drawer  
completely.  
10  
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Suggestions for Matching Food and  
Wine  
6 Wine Guide  
Wine Selections Suggestions  
Although there are no hard fast rules for matching wine  
to food, observe some guidelines. Delicate dishes should  
be accompanied by lighter more delicate wines. Full-  
flavored foods should be matched with fuller-bodied  
wines.  
Selecting the right wine for the right occasion can  
sometimes be a seemingly awkward or difficult task for  
the beginning wine enthusiast. We would therefore like  
to present you with a few suggestions which may provide  
a little more confidence and enjoyment when choosing  
and serving your wines.  
As a general rule, one should aim to ascend in flavor and  
quality of wines served.  
Table 1  
When selecting wines, keep an open mind and do not be  
afraid to be adventurous. Do not view the subject of wine  
so seriously it discourages you from learning and  
Serve a:  
Before a:  
DRY wine  
SWEET wine  
RED wine  
discovering for fear of embarrassment if something is  
incorrect. Wine is best viewed as a hobby and enjoyed.  
WHITE wine  
YOUNG wine  
LIGHT-BODIED wine  
When assembling your collection, try not to become  
obsessed with “Vintages.” Although a chart can be a  
useful tool, generalizations about a specific year have led  
more than one collector to disappointment. In many  
instances an “Off Year” will provide a better value and  
more drinking enjoyment.  
OLD wine  
FULL-BODIED wine  
Any step back in quality will be noticed. If a fine wine is  
tasted prior to a lesser wine, many of the fine wine’s  
subtle qualities may be missed.  
The primary guideline to the subject of wine is your own  
palate. Do not be afraid to make mistakes. Experiment,  
discover, but most of all, enjoy yourself and your new  
U-Line product.  
Common Food and Wine Matches  
Table 2  
Foods  
Wines  
Fish, Shell Fish, Crab, Oysters  
Dry White Wines, Light  
Sparkling or Extra Dry  
Champagne  
Beef, Venison  
Full-Bodied Red Wines  
Light-Bodied Red Wines  
Pork, Veal, Lamb and Poultry  
Fruit  
Sweet White and Sparkling  
Wines  
2275DWRWS, 2275DWRWOL  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to Common Styles of Wine  
Red Wines  
Full-Bodied Dry  
California  
French  
Italian  
Zinfandel, Cabernet  
Rhone, Chateauneuf-du-Pape  
Barbaresco, Barolo  
Medium-Bodied Dry  
Light-Bodied Dry  
California  
French  
Pinot Noir  
Bordeaux, Burgundy  
French  
Italian  
Beaujolais  
Chianti, Bardolino  
White Wines  
Full-Bodied Dry  
California  
French  
Chardonnay  
Montrachet, Meursault  
Puligny-Montrachet  
Medium-Bodied Dry  
California  
French  
Sauvignon-Blanc  
Pouilly-Fuisse, Sancerre,  
Vouvray, Graves  
Light-Bodied Dry  
French  
Chablis, Muscadet, Pouilly-Fume  
Full-Bodied, Very Sweet  
Germany  
Frency  
Hungary  
Beerenauslese  
Sauternes  
Tokay  
Medium-Bodied, Semi-Sweet  
Light-Bodied Off Dry  
California  
Germany  
Gewurtztraminer  
Liebfraumilch  
Germany  
Rhine, Mosel, Riesling  
Common Tasting Terms  
Terminology  
Description  
Acidity  
A critical element of wine that is responsible for preserving the wines freshness. Excess acidity results in an  
overly tart and sour wine.  
Balance  
Body  
A desired trait where tannin, fruit and acidity are in total harmony. Wines with good balance tend to age  
gracefully.  
The weight and presence of wine in the mouth provided by the alcohol and tannin level. Full-bodied wines  
tend to have this strong concentration.  
Bouquet  
Complex  
The blending of a wine's aroma within the bottle over a period of time, caused by volatile acidity.  
A subjective term often used in tasting. A wine is said to be complex if it offers a variety of flavors and scents  
that continue to evolve as it develops.  
Flabby  
Full-Bodied  
Lean  
A wine that lacks structure, or is heavy to the taste, lacks acidity.  
Wine high in alcohol and extract, generally speaking, fills the mouth, powerful.  
Generally describes wines that are slim, lacking of generosity or thin.  
Oaky  
A desirable flavor imparted to wine if done in moderation. Most wines are aged in oak barrels one to three  
years, thereby receiving this toasty oak characteristic. However, if a weak wine is left in contact too long with  
an oak barrel it will tend to be overpowered with an oaky taste.  
Tannin  
Tannins are extracted from the grape skins and stems and are necessary for a well-balanced red wine. Tannins  
are easily identified in wine tasting as the drying sensation over the gums. Tannins generally fade as a wine  
ages.  
12  
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
7 Cleaning and Maintenance  
Proper maintenance of your U-Line product will ensure  
efficiency, top performance and long life. The  
maintenance intervals listed are based on normal  
conditions. You may want to shorten the intervals if you  
have pets or other special considerations.  
General Cleaning  
Exterior Cleaning (As Required)  
• Stainless steel surfaces and components can discolor  
when exposed to chlorine gas, pool chemicals, salt  
water or cleaners with bleach.  
Defrosting  
Automatic (Cycle) Defrost Models  
• Keep your stainless steel unit looking new by cleaning  
with a good quality all-in-one stainless steel cleaner/  
Automatic defrost models do not produce frost in normal  
operating conditions. However, a frost pattern may be  
noticed on the interior walls if the unit is repeatedly  
opened in a high heat or high humidity location. If this  
frost pattern does not clear within 24 hours, your unit will  
require manual defrosting.  
®
polish on a monthly basis. For best results use Claire  
Stainless Steel Polish and Cleaner, which can be  
purchased from U-Line Corporation (P/N 173348).  
Comparable products are acceptable. Frequent  
cleaning will remove surface contamination that could  
lead to rust. Some installations may require cleaning  
on a weekly basis.  
WARNING  
• Do not clean with steel wool pads.  
DO NOT use any type of electrical heating device,  
ice pick, knife or other sharp instrument to  
defrost; this could damage the inner lining or  
refrigeration system and void the warranty.  
• Do not use cleaners that are not specifically  
intended for stainless steel on stainless steel  
surfaces (this includes glass, tile and counter  
cleaners).  
IMPORTANT  
• If any surface discoloring or rusting appears, clean it  
®
®
quickly with Bon-Ami or Barkeepers Friend Cleanser  
The drain pan was not designed to capture the  
water created when manually defrosting. To  
prevent water from overflowing the drain pan,  
place towels or other absorbent materials over the  
interior drain trough, under the evaporators  
(Figure 11, 1), before defrosting.  
and a non-abrasive cloth. Always clean in the direction  
of the grain. Always finish this process with Claire  
Stainless Steel Polish and Cleaner or comparable  
product to prevent further problems.  
• Using abrasive pads such as Scotchbrite™ will  
cause the graining in the stainless steel to  
become blurred.  
• Rust that is not cleaned up promptly can penetrate into  
the surface of the stainless steel and complete removal  
of the rust may not be possible.  
1
Interior Cleaning (As Required)  
• Disconnect power to the unit. Clean the interior and all  
removed components using a mild non-abrasive  
detergent and warm water solution applied with a soft  
sponge or non-abrasive cloth. Rinse the interior using a  
soft sponge and clean water.  
• Do not use any solvent-based or abrasive  
cleaners. These types of cleaners may transmit  
taste to the interior products and damage or  
discolor the interior.  
ULIN_0235_A  
Figure 11  
2275DWRWS, 2275DWRWOL  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To defrost:  
4. Clean the condenser coil (Figure 12, 2) using a soft  
brush with a “combing” action or vacuum cleaner. Do  
not touch the condenser coil.  
1. Turn unit off.  
2. Remove all products from the interior and open the  
drawer(s) (2" (5 cm) minimum).  
5. Position the grille to align the mounting screws with  
the holes in the cabinet.  
3. Allow the frost to completely melt naturally. Clean the  
interior and all removed components using a mild non-  
abrasive detergent and warm water solution applied  
with a soft sponge or non-abrasive cloth. NOTE: DO  
NOT use any solvent-based or abrasive cleaners. They  
will discolor or damage the interior.  
6. Secure, but do not over-tighten both grille screws.  
7. Reconnect power to the unit.  
Leveling  
4. Dampen a soft sponge or non-abrasive cloth in clean  
water and wipe down the cabinet interior and removed  
components to remove any detergent residue. Rinse the  
sponge or cloth in clean water and repeat as necessary  
until the cabinet and components are clean.  
5. When the interior is dry, turn unit back on.  
Condenser Cleaning  
Interval - Every Three Months  
To maintain operational efficiency, keep the front grille  
free of dust and lint and clean the condenser every three  
months. Depending on environmental conditions, more  
or less frequent cleaning may be necessary.  
WARNING  
Check Level  
Disconnect electric power to the unit before  
cleaning the condenser.  
ULIN_0152a_A  
Figure 13  
To remove and replace the grille for access to the  
condenser fins, follow this procedure:  
1. Use a level to check the levelness of the unit from front  
to back and from side to side. Level should be placed  
along top edge and side edge as shown (Figure 13)  
.
1
ULIN_0  
236_A  
2
Figure 12  
1
ULIN_0044_A  
1. Disconnect electrical power to the unit.  
Figure 14  
2. Loosen two screws (Figure 12, 1) completely.  
2. If the unit is not level, adjust the feet on the corners of  
the unit as necessary (Figure 14)  
NOTE: Screws are held in the grille by o-ring retainers,  
and will not come free of the grille.  
.
3. Check the levelness after each adjustment and repeat  
the previous steps until the unit is level.  
3. Remove the grille.  
WARNING  
DO NOT touch the condenser fins. The condenser  
fins are SHARP and can be easily damaged.  
CAUTION  
DO NOT use any type of cleaner on the condenser  
unit.  
14  
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Drawer Alignment  
WARNING  
Adjust Drawers  
Checking Drawer Alignment  
The unit’s drawers are aligned at the factory before  
shipment. However, their alignment could have been  
disturbed during shipment.  
SHOCK HAZARD — The unit must be unplugged  
from the wall outlet during drawer removal,  
adjustment and re-installation.  
Drawer Removal  
Aligned  
Front-to-Back  
Aligned  
Side-to-Side  
Aligned  
Top-to-Bottom  
ULIN_0001a_A  
Mounting  
Screw  
Figure 15  
See Figure 15. Check each drawer to confirm that it is  
aligned:  
ULIN_0001b_A  
Figure 16  
Side-to-Side — When viewed from the top, the  
drawer front should be square with the sides of the  
cabinet.  
1. Confirm that the unit is unplugged from wall outlet.  
2. Unplug the drawer  
s connection wiring (top drawer  
Front-to-Back — When viewed from the side, the  
drawer front should be straight with the cabinet’s  
sides, not cocked forward or back.  
only).  
3. Remove the mounting screws. See Figure 16  
.
4. Pull the drawer completely out of the unit.  
Top-to-Bottom — When viewed from the front, the  
drawer should be level horizontally.  
CAUTION  
If either drawer is not aligned, carefully follow  
instructions to remove that drawer, make the necessary  
adjustment and re-install the drawer.  
Use care when handling the drawer. Drawer edges,  
drawer rail and the unit’s slide may be sharp.  
IMPORTANT  
Drawer adjustments are made by moving the slide  
that carries the drawer’s rail. Minor adjustments  
may be made by loosening one of the slide’s  
mounting screws, adjusting the slide and  
retightening the screw. Severe adjustments may be  
made by removing the slides’ mounting screws,  
drilling new mounting holes and remounting the  
slide.  
2275DWRWS, 2275DWRWOL  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Severe Adjustment:  
Side-to-Side Adjustment  
NOTE: The slides have extra mounting holes that  
may be used.  
Mark and Drill New  
Mounting Holes  
Not Aligned Side-to-Side  
Top View of Unit  
ULIN_0001c_A  
Push Slide  
Backward  
Figure 17  
ULIN_0001e_A  
See Figure 17. The drawer will need a Side-to-Side  
Adjustment if, when viewed from the top, the drawer  
front is not square with the sides of the cabinet. This is  
caused by one of the slides being mounted too far  
forward on the unit’s liner.  
Figure 19  
1. Remove the slide’s mounting screws.  
2. Reposition the slide so it is the same distance from the  
front of the liner as the other slide. Measure to confirm.  
Minor Adjustment:  
3. Mark new drilling holes using different sets of  
NOTE: The mounting holes on the slide are slightly  
larger than the screws’ diameter.  
mounting holes on the slide. See Figure 19  
.
NOTE: Front location holes are shown.  
Corresponding rear holes will also need to be  
marked.  
Loosen  
Mounting Screws  
4. Drill all the new holes with a #30 drill bit.  
5. Remount the slide.  
Front-to-Back Adjustment  
Not Aligned Front-to-Back  
Push Slide  
Backward  
ULIN_0001d_A  
Figure 18  
1. Loosen the slide’s mounting screws.  
2. Push the slide backward.  
Side View of Unit  
3. Retighten the screws. See Figure 18  
.
ULIN_0001f_A  
Figure 20  
See Figure 20. The drawer will need a Front-to-Back  
Adjustment if, when viewed from the side, the drawer  
front is cocked forward or back. This is caused by the front  
slide mountings not being level with the rear slide  
mountings.  
16  
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Minor Adjustment:  
Wood Overlay  
Frame Preparation  
NOTE: The mounting holes on the slide are slightly  
larger than the screws’ diameter.  
An overlay frame covers the drawer front to give a built-  
in appearance. Appropriate hardware and a copy of these  
instructions will be included in the unit.  
Screws Should  
Be Loose  
IMPORTANT  
The thickness of the overlay frame must be 3/4".  
The drawer frame must not weigh more than 10 lbs.  
Create two frames to the dimensions shown in Figure 23.  
Level the Slide  
23-13/16"  
ULIN_0001g_A  
Figure 21  
1. Loosen one slide’s mounting screws.  
2. Level the slide.  
2-3/4" Typ  
4 Sides  
3. Retighten the screws. See Figure 21  
.
4. Repeat procedure for the other slide.  
Severe Adjustment:  
3/4"  
NOTE: The slides have extra mounting holes that  
may be used.  
Mark and Drill New  
Mounting Holes  
14-13/16"  
Level the Slide  
ULIN_0001h_A  
ULIN_0620_A  
Figure 23  
Figure 22  
1. Make sure unit is unplugged from the electrical outlet.  
1. Loosen one slide’s rear mounting screws.  
NOTE: If cabinet handles are installed, make sure  
the mounting screw heads are below (countersunk)  
the back surface of the overlay.  
2. Remove the slides front mounting screws.  
3. Reposition the slide so it is level.  
2. Starting with the TOP drawer, open drawer fully.  
4. Mark new front drilling holes using a different set of  
mounting holes on the slide. See Figure 22  
5. Drill the new holes with a #30 drill bit.  
6. Remount the slide.  
.
You should have already prepared the overlay panel  
and have the cabinet handles installed.  
7. Repeat procedure for the other slide.  
2275DWRWS, 2275DWRWOL  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Light Bulb Replacement  
To replace the light bulb in your U-Line unit:  
4
3
2
2
1
ULIN_0001_A  
Figure 25  
1. Grasp the edges of the light housing lens  
(Figure 25, 1) opposite the exposed tab and gently  
push the lens toward the tab (Figure 25, 2).  
1
ULIN_0154a_A  
2. Pull the edge of the lens down (Figure 25, 1) and  
swing it out of the light housing.  
Figure 24  
3. Place finished drawer overlay panel (Figure 24, 3) over  
front of drawer and using masking tape, tape to front  
of drawer, making sure to center overlay and making  
the top and bottom flush with drawer.  
IMPORTANT  
ALWAYS use a genuine U-Line replacement bulb (P/N  
31317) in the light housing. Use of any other bulb  
within the housing will generate excessive heat,  
causing damage to the light housing and cabinet  
interior, and will compromise the precise  
4. Place drawer overlay bracket (Figure 24, 1)on bottom  
of drawer making sure to catch the back of the drawer  
with the short lip on bracket.  
temperature control of your unit.  
3. Replace the bulb only with a genuine U-Line P/N 31317  
replacement.  
Also align the wood overlay with the ends of the  
bracket, and tape in place.  
4. Replace the lens by first inserting the tab side back into  
the housing at a slight angle. While gently pushing the  
lens towards the tab end, push the free end up into the  
housing, and release when you will hear a snap/click.  
5. Mark center of holes from mounting bracket onto the  
wood overlay.  
6. Using an ice pick, or similar tool, mark the location of  
the top mounting screws on the wood overlay.  
Wine Rack Removal/Installation  
7. Remove the lower mounting bracket and wood overlay  
from the drawer.  
To remove a rack from the cabinet:  
8. Using a #44 (0.094) drill, pre-drill pilot holes in the  
locations noted from steps 5 and 6, be sure to NOT drill  
through the overlay.  
1. Grasp the end of the rack, and gently slide it out until  
it stops.  
2. Remove any bottles stored on the rack.  
Drill the pilot hole from step 5, 9/16" deep and the  
ones from step 6, 1/4" deep.  
9. Attach the bottom bracket to the wood using 2 of the  
5/8" screws (Figure 24, 2) included with the unit.  
10. Attach the wood overlay assembly to the drawer  
starting at the bottom of the drawer, then re-centering  
it on the drawer front.  
11. Secure the top of the wood panel by placing 2 of the  
1-1/2" wood screws (Figure 24, 4) through the top  
holes in the drawer, and tighten securely.  
12. Repeat steps for bottom drawer.  
ULIN_0155a_A  
Figure 26  
18  
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press the left rack release lever (Figure 26) down, and  
at the same time, lift the corresponding right rack  
release lever up, and pull the rack out until it is free of  
the tracks and the cabinet.  
Staining and final finish application:  
1. Remove all screws securing wood trim to interior  
components, and remove the trim from the cabinet  
interior.  
IMPORTANT  
To remove the top drawer display wood trim:  
Do not remove the track side rails from the cabinet.  
To insert a rack in the cabinet:  
1
4
1. Align the left and right rack channels with the tracks  
in the cabinet, and ensuring an even track  
engagement on both sides, gently push the rack into  
the cabinet until it stops.  
5
2. Before reloading the rack, ensure proper operation of  
the travel stops in the left and right track rails by  
pulling the rack out gently until it completely stops.  
3
ULIN_0831_A  
Figure 27  
Wood Trim Finishing  
2. Remove the two screws (Figure 27, 1), securing trim  
®
The U-Line Wine Captain is equipped with wood-  
to wine rack assembly (Figure 27, 2).  
trimmed wine racks that are coated at the factory with a  
clear vinyl sealer, which will adequately protect the wood  
in normal usage. A final finish coat was not applied so  
that the wood trim could be stained to match décor. The  
trim on the racks may be coated with a final finish or  
stained.  
NOTE: Your model will contain an electronic display panel  
(Figure 27, 3) in the middle level trim piece. After  
removing the trim screws, and gently pulling the trim  
from its location, a wiring harness connector  
(Figure 27, 4) will become visible. Unplug the connector.  
3. Remove the two screws, securing the electronic control  
to the wood trim. Carefully rotate the wood trim so the  
electronic control slides out of the wood, and place the  
electronic control aside in a safe location.  
WARNING  
To prevent permanent damage to the inner liner  
of your unit, the wood trim MUST be removed  
from the unit for staining and/or finishing. Allow  
stain/finish to dry thoroughly (at least 24 hours  
per coat) in accordance with the product  
manufacturer’s instructions prior to  
NOTE: The electronic control and glass front are NOT  
connected. Be careful when removing the control  
not to drop the glass.  
reinstallation. Failure to do so may cause the  
inner liner of the unit to have a permanent odor,  
which is not covered by the warranty.  
3
1
If staining the trim is desired, it must be done before the  
application of any type of final finish. Review the  
following staining/final finish and final finish-only  
guidelines when staining/ and or sealing the wood to  
ensure proper adhesion and durability of the finish.  
2
NOTE: Glass in door is tinted. Stain may look darker  
when door is closed.  
ULIN_0145a_A  
Figure 28  
4. Remove the two screws (Figure 28, 1) securing trim to  
wine rack assembly (Figure 28, 2)  
.
2275DWRWS, 2275DWRWOL  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Your model will contain an electronic display  
panel (Figure 28, 3) in the wine rack attached to the  
bottom drawer. After removing the trim screws,  
and gently lifting the trim from its location, a  
wiring harness connector will become visible.  
Unplug the connector. DO NOT remove drawer from  
unit.  
Final finish-only application:  
1. Follow steps 1 through 6, then continue with step 2 in  
this section.  
2. Lightly scruff sand the wood trim with 280 or finer grit  
sandpaper.  
3. Remove sanding dust with a clean, dry cloth.  
5. Remove the two screws securing the electronic control  
to the wood trim. Carefully rotate the wood trim so the  
electronic control slides out of the wood and place  
electronic control aside in a safe location.  
4. The factory-applied seal is compatible with virtually all  
finishes. A low odor, water clean up, quick-drying finish  
®
®
such as Minwax Polycrylic Protective Finish is  
®
®
recommended (Minwax Polycrylic is an ultra fast-  
drying water-based finish). Apply a thin coat of a clear,  
protective finish, following the container label  
directions.  
NOTE: the electronic control and glass front are NOT  
connected. Be careful when removing control not to  
drop the glass.  
6. Remove the remaining wood fronts from the additional  
racks by extending racks out as far as possible and then  
removing the three screws that attach the wood to the  
racks.  
5. Lightly sand and reapply if desired.  
6. Allow the final coat to dry for 24 hours before  
reinstalling the display to bottom drawer trim and  
remaining trim to the cabinet interior components.  
IMPORTANT  
DO NOT apply stain/final finish to the wood trim  
with the electronic display attached to the wood.  
Damage may occur to the electronic control which  
is not covered by the warranty.  
IMPORTANT  
DO NOT use oil-based stains on wood trim. Vapors  
from oil-based stains will permanently penetrate  
the liner and will not dissipate over time.  
®
7. Apply Minwax Water-Based Wood Stain to wood with  
a synthetic bristle brush or a foam applicator. Allow  
stain to penetrate approximately three minutes. Before  
the stain is dry, take a stain dampened rag and remove  
any excess stain remaining. Wipe in the direction of the  
grain with medium pressure to achieve the desired stain  
color.  
8. After two hours, repeat step 2. This will even out the  
color of the wood.  
9. Allow stain to dry for a minimum of three hours before  
applying the final finish.  
10. If desired, sand the wood with very fine sandpaper to  
smooth the surface after the staining process.  
11. Remove all dust from the wood, and apply one coat of  
®
®
Minwax Polycrylic Protective Finish using a synthetic  
bristle brush to the wood. This finish should be applied  
in a thin coat following the direction of the grain.  
Apply the finish to the back and sides of the wood first,  
and allow it to dry for two hours. Apply the finish to the  
front side of the wood next, and allow it to dry for two  
hours. Sand with very fine 220 grit sandpaper. Apply  
two addition coats of the finish in the same manner, but  
do not sand the trim after the final third coat is applied.  
12. Allow the final coat to dry for 24 hours before  
reinstalling the trim to the cabinet interior components.  
20  
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 Service  
Before Calling for Service  
If your U-Line product appears to be malfunctioning, read  
through the OPERATION section of this guide to ensure  
that the function of all controls are clearly understood. If  
the malfunction persists, the TROUBLESHOOTING GUIDE  
in this guide will assist you in quickly identifying common  
problems, and provide information on possible causes and  
remedies. Most often, this will resolve the problem  
without the need to call for service.  
If Service is Required  
If you do not understand a troubleshooting remedy, or  
your product needs service, contact U-Line Corporation  
directly. Contact information appears on the rear cover of  
this guide.  
You will be asked for your product Model and Serial  
Numbers. This information should be recorded inside the  
front cover of this guide, following the products original  
purchase. It also appears on the Model and Serial number  
plate located on the upper right or rear wall of the  
interior of your product.  
Replacement Parts  
When you need replacement parts, always request that  
genuine U-Line replacements be used. U-Line products  
have been designed and engineered using components  
that work efficiently, and provide superior service life and  
performance. The use of aftermarket parts or components  
may affect the safety, operation, performance or  
durability of your product, and may also void its warranty.  
2275DWRWS, 2275DWRWOL  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
DANGER  
ELECTROCUTION HAZARD  
Never attempt to repair or perform maintenance on  
the unit until the main electrical power has been  
disconnected.  
Troubleshooting - What to check when problems occur:  
PROBLEM  
POSSIBLE CAUSE  
REMEDY  
Unit does not operate and  
electronic display is blank.  
No electrical supply  
Plug unit in or check circuit breaker.  
No interior light  
Loose or burned out bulb  
Control set too warm  
Tighten or replace bulb (See MAINTENANCE; LIGHT  
BULB REPLACEMENT).  
Unit not cold enough. Check  
temperatures (See OPERATION for  
approximate temperatures).  
Set control to a cooler setting (See OPERATION). Allow  
24 hours for temperature to stabilize.  
Airflow to front grille blocked  
Dirty condenser coils  
Airflow must not be obstructed to front grille (See  
OPERATION).  
Clean condenser (See MAINTENANCE; CONDENSER  
CLEANING).  
Door gasket not sealing properly  
Door adjustment required (See MAINTENANCE; ADJUST  
DRAWERS).  
Item(s) interfering with drawer  
Inaccurate temperature reading  
Reposition or remove item(s).  
Properly check temperature (See OPERATION).  
Unit is too cold. Check temperatures Control set too cold  
(See OPERATION for approximate  
temperatures).  
Set control to a warmer setting (See OPERATION). Allow  
24 hours for temperature to stabilize.  
The unit frosts up.  
High ambient temperatures or  
humidity  
Defrost unit manually (See MAINTENANCE;  
DEFROSTING).  
Noise during operation.  
Drawer(s) can't close.  
Certain sounds are normal.  
Soft sounds from the fan and water/dropping sounds  
from the ice maker will be heard.  
Item(s) interfering with drawer  
Unit not level  
Adjust items in drawer(s).  
Make sure unit is level (See LEVELING, page 14).  
22  
2275DWRWS, 2275DWRWOL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U-Line Corporation Limited Warranty  
U-Line Corporation warrants each U-Line product to be free from defects in materials and workmanship for a period of  
one year from the date of purchase; and warrants the sealed system (consisting of the compressor, the condenser, the  
evaporator, the hot gas bypass valve, the dryer and the connecting tubing) in each U-Line product to be free from  
defects in materials and workmanship for a period of five years from the date of purchase. During the initial one-year  
warranty period for all U-Line products U-Line shall: (1) at U-Lines option, repair any product or replace any part of a  
product that breaches this warranty; and (2) for all Marine, RV and Domestic U-Line products sold and serviced in the  
United States (including Alaska and Hawaii) and Canada, U-Line shall cover the labor costs incurred in connection with  
the replacement of any defective part. During years two through five of the warranty period for the sealed system, U-  
Line shall: (1) repair or replace any part of the sealed system that breaches this warranty; and (2) for all Marine, RV and  
Domestic U-Line products sold and serviced in the United States (including Alaska and Hawaii) and Canada, U-Line shall  
cover the labor costs incurred in connection with the replacement of any defective part of the sealed system. All other  
charges, including transportation charges for replacements under this warranty and labor costs not specifically covered  
by this warranty, shall be borne by you. This warranty is extended only to the original purchaser of the U-Line product.  
The Registration Card included with the product should be promptly completed by you and mailed back to U-Line or you  
The following are excluded from this limited warranty: installation charges; damages caused by disasters or acts of God,  
such as fire, floods, wind and lightening; damages incurred or resulting from shipping, improper installation,  
unauthorized modification, or misuse/abuse of the product; customer education calls; food loss/spoilage; door and water  
level adjustments (except during the first 90 days from the date of purchase); defrosting the product; adjusting the  
controls; door reversal; or cleaning the condenser.  
If a product defect is discovered during the applicable warranty period, you must promptly notify either the dealer from  
whom you purchased the product or U-Line at P.O. Box 245040, Milwaukee, Wisconsin 53224 or at 414-354-0300. In no  
event shall such notification be received later than 30 days after the expiration of the applicable warranty period. U-Line  
may require that defective parts be returned, at your expense, to U-Lines factory in Milwaukee, Wisconsin, for  
inspection. Any action by you for breach of warranty must be commenced within one year after the expiration of the  
applicable warranty period.  
This limited warranty is in lieu of any other warranty, express or implied, including, but not limited to any  
implied warranty of merchantability or fitness for a particular purpose; provided however, that to the  
extent required by law, implied warranties are included but do not extend beyond the duration of the  
express warranty first set forth above. U-Lines sole liability and your exclusive remedy under this warranty  
is set forth in the initial paragraph above. U-Line shall have no liability whatsoever for any incidental,  
consequential or special damages arising from the sale, use or installation of the product or from any other  
cause whatsoever, whether based on warranty (express or implied) or otherwise based on contract, tort or  
any other theory of liability.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or  
consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and  
you may also have other rights which vary from state to state.  
2275DWRWS, 2275DWRWOL  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For General Inquiries:  
P.O. Box 245040  
Milwaukee, Wisconsin  
53224-9540 U.S.A.  
Phone (800) 779-2547  
FAX (414) 354-5696  
For Service and Parts  
Assistance:  
Phone (800) 779-2547  
(414) 354-0300  
FAX (414) 354-5696  
Email:  
E-mail:  
For more than four decades, U-Line has distinguished itself as the  
leader in built-in under-counter ice making, refrigeration and  
wine storage appliances.  
An INSTALLATION MANUAL for your unit, providing complete  
installation information, is available for download at  
including panel size, and instructions are available by visiting  
When you need replacement parts, always request genuine U-Line  
distributor in your area.  
U-Line Corporation, located in Milwaukee, WI, is a family operated manufacturer of built-in  
®
®
undercounter ice makers, Combo ice maker/refrigerators, Wine Captain wine storage units,  
refrigerators, refrigerated drawers and refrigerator/freezers.  
©2006 U-Line Corporation  
Publication No. 30179  
01/2007 Rev. A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Music Mixer US 1641 User Manual
Toastmaster Electric Steamer EST7 User Manual
Toshiba Copier 281c 351c 451c User Manual
Troy Bilt Chainsaw TB4218CC User Manual
Uniden Cell Phone TCX950 User Manual
United States Stove Air Conditioner 4027 User Manual
Univex CD Player DB285USB User Manual
Volvo Automobile S60R User Manual
Vulcan Hart Outdoor Cart F037411 User Manual
Wayne Plumbing Product ISP40 User Manual