Tricity Bendix Washer Dryer WDR 1040 W User Manual

OPERATING & INSTALLATION  
INSTRUCTIONS  
WASHER-DRYER  
WDR 1040 W  
WDR 1240 W  
132993190  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Wash Care Symbols  
Washing Programmes  
Drying Programmes  
14  
15-16  
17  
For the User  
Important Safety Information  
Your New Washer-Dryer  
2
4
Maintenance and Cleaning  
18-19  
18  
Description of the Appliance  
5
5
Descaling  
Detergent dispenser drawer  
After each wash  
Maintenance wash  
18  
18  
The Control Panel  
6
External cleaning  
18  
18  
18  
Operating sequence  
Washing 4.5 kg of white cotton at 95°C  
7-11  
7
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the filter  
Load the laundry  
7
7
7
7
7
8
18-19  
19  
Measure out the detergent  
Measure out the fabric softener  
Select the required programme  
Start the machine  
The dangers of freezing  
Something Not Working  
Service and Spare Parts  
Guarantee Conditions  
20-21  
21  
At the end of the programme  
22  
Washing 2 kg of mixed fabrics at 50°C  
9
Load the laundry  
9
9
9
9
9
9
For the Installer  
Measure out the detergent  
Measure out the fabric softener  
Select the programme  
Start the machine  
Installation Instructions  
Technical Specifications  
Unpacking  
Positioning  
Water inlet  
Water drainage  
Levelling  
Special conditions  
In the interest of the environment  
Electrical connection  
23  
23  
At the end of the programme  
24  
24  
25  
Drying 2.25 kg of cotton  
10  
Load the laundry  
10  
10  
10  
10  
10  
Select the programme  
Select the required time  
Start the machine  
25-26  
26  
26  
26  
27  
At the end of the programme  
Autodrying 1 kg of mixed fabrics  
11  
Load the laundry  
Add the washing powder and additive  
Select the programme  
Select the required time  
Start the machine  
At the end of the programme  
11  
11  
11  
11  
11  
11  
Washing and Drying Hints  
Which detergent to use?....  
And in which form?  
12  
13  
13  
13  
Fabric Conditioners  
Guide to use the Instruction Book  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your New Washer-Dryer  
Your new washer-dryer meets all modern requirements for effective treatment of laundry with  
low water, energy and detergent consumption.  
It is gentle with your laundry, simple to use and easy to care for.  
The special wool programme with its new delicate  
In the interest  
wash system treats your woollens with extreme care.  
of the environment  
The anti-unbalance device ensures that the  
machine remains stable when spinning.  
Materials marked with the symbol  
recyclable.  
are  
Automatic cooling of the wash water to 60°C  
before draining, with the 95°C programme. This  
reduces thermal shock to fabrics, helping to prevent  
creasing.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
The two drying programmes will give your wash  
that soft, relaxed feel whatever the weather.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door lock device  
unusable to prevent young children from being  
trapped inside.  
Ecological hints  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
How do we help to protect the environment?  
We use recycled paper!  
Adjust the quantity of detergent according to the  
hardness of your water supply, the amount of  
laundry and the degree of soiling.  
A programme without prewash is sufficient for  
normally soiled laundry.  
Try to load the maximum washing and drying  
capacity of the machine as small loads are  
uneconomical.  
Always load well spun laundry. The higher the spin  
speed, the lower the electricity consumption and the  
shorter the drying times.  
Important  
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.  
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly  
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the  
wash load manually and select a spin programme. For more detailed information see the section headed "Something  
Not Working".  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the Appliance  
1 Detergent dispenser drawer  
2 Programme guide  
3 Drying indicator Light  
4 Drying Time Selector Dial  
5 ON/OFF Button  
8
1
34  
6
7
5
1000 rpm  
PROGRAMME  
DRYING TIME  
COTTONS  
-
LINENS  
SYNTHETICS  
DELICATE FABRICS  
WOOL  
DELICATES  
Rinses  
WHITES with PREWASH 95°  
WHITES  
FAST COLOURS  
NON FAST COLOURS  
Long spin  
1
2
3
4
5
6
MIXED FABRICS  
QUICK AND COOL  
Rinses  
Conditioner rinse  
Short spin  
50°  
30°  
7
8
9
40° 13  
40° 14  
15  
MAINS ON  
95°  
60°  
40°  
HALF  
LOAD  
10  
Drain  
16  
1
1
FULL HEAT DRYING  
HALF HEAT DRYING  
12  
WASHER DRYER  
REVERSE ACTION  
WDR 1040  
W
6 Half Load Button  
7 “Mains-on” Light  
2
8 Programme Selector Dial  
9 Door opening handle  
10 Filter  
9
11 Adjustable feet  
10  
11  
Detergent dispenser drawer  
Prewash  
Main wash  
Fabric softener  
C0026  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Control Panel  
1000 rpm  
PROGRAMME  
DRYING TIME  
COTTONS - LINENS  
WHITES with PREWASH 95°  
WHITES  
FAST COLOURS  
NON FAST COLOURS  
Long spin  
SYNTHETICS  
DELICATE FABRICS  
WOOL  
DELICATES  
Rinses  
1
2
3
4
5
6
MIXED FABRICS  
QUICK AND COOL  
Rinses  
Conditioner rinse  
Short spin  
50°  
30°  
7
8
9
10  
11  
12  
40° 13  
40° 14  
15  
MAINS ON  
HALF  
LOAD  
95°  
60°  
40°  
Drain  
16  
FULL HEAT DRYING  
HALF HEAT DRYING  
WASHER DRYER  
REVERSE ACTION  
WDR 1040 W  
1
4 5  
7
2
3
6
5 HALF LOAD Button  
1 Programme guide  
Select this button to reduce water consumption on the  
rinse cycle when washing a smaller load of cottons or  
linens (maximum load size = 2.25 kg).  
2 Drying indicator Light  
This light illuminates when the machine is drying.  
6 MAINS-ON Light  
3 Drying time Selector Dial  
This light illuminates when the machine starts working  
and goes out when the ON/OFF button is released.  
Graduated up to 120 mins for cottons (black section)  
and synthetics (red section), this dial allows you to  
select the desired drying time according to the type and  
quantity of laundry and the required degree of dryness.  
Turn the dial clockwise only.  
7 Programme Selector Dial  
Turn the dial clockwise to select the required wash and  
drying programme.  
Cooling phase  
Before setting the dial to any position the machine must  
be switched off by depressing the ON/OFF button  
again.  
To allow the laundry to cool down, a cooling phase  
starts automatically 10 minutes before the end of drying  
and this phase must in no circumstances be reduced or  
interrupted.  
4 On/Off Button  
By depressing this button the machine starts operating.  
When depressed again, the machine stops.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Sequence  
Before the first wash, we recommend that you run a  
3. Measure out the fabric  
cotton cycle at 60°C, without any laundry in the  
machine, to remove any manufacturing residue from the  
drum and tub.  
softener  
If required, pour fabric softener into the compartment  
marked  
(the amount used must not exceed the  
Pour 1/2 a measure of detergent into the main wash  
“MAX” mark in the drawer).  
Close the drawer gently.  
compartment  
machine.  
of the dispenser drawer and start the  
WASHING 4.5 KG OF WHITE COTTON AT 95°C  
Suppose you have 4.5 kg of normally soiled laundry to  
wash. It is white cotton and is suitable for high  
temperature washing.  
1. Load the laundry  
C0024  
Open the door by pulling the door handle outwards.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible. Close the door.  
4. Select the required programme  
Turn the programme selector dial clockwise to the  
programme 2 or 1 (if you wish to perform a prewash).  
2
P0004  
P1006S  
2. Measure out the detergent  
5. Start the machine  
Pull out the dispenser drawer until it stops.  
Measure out the amount of detergent required and pour  
Before starting up the machine check that:  
.
it into the main wash compartment  
If you wish to carry out the prewash, pour detergent into  
the appliance is plugged in  
the water supply tap is turned on  
the compartment marked  
.
the drain hose is correctly and securely positioned  
the door and the detergent dispenser drawer are  
closed.  
Depress the ON/OFF button: the mains-on light will  
illuminate and the machine starts operating.  
C0025  
T0003  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. At the end of the programme  
The machine stops automatically.  
The door is controlled by a safety device which releases  
2 minutes after the end of the programme.  
Switch the machine off by depressing the ON/OFF  
button again. The mains-on light goes out.  
Remove the laundry.  
When the programme has finished you are advised to  
unplug the appliance and turn off the water tap.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
WASHING 2 KG OF MIXED FABRICS AT 50°C  
Suppose you have 2 kg of Mixed fabrics to wash. They  
are rather delicate fabrics and should not be washed at a  
high temperature.  
4. Select the programme  
Turn the programme selector dial clockwise to the  
programme 7.  
1. Load the laundry  
7
Open the door by pulling the door handle outwards.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible. Close the door.  
P1006b  
5. Start the machine  
Before starting up the machine check that:  
P0004  
the appliance is plugged in  
the water supply tap is turned on  
the drain hose is correctly and securely positioned  
2. Measure out the detergent  
the door and the detergent dispenser drawer are  
closed.  
Pull out the dispenser drawer until it stops.  
Measure out the amount of detergent required and pour  
Depress the ON/OFF button: the mains-on light will  
illuminate and the machine starts operating.  
it into the main wash compartment  
.
C0025  
T0003  
6. At the end of the programme  
3. Measure out the fabric  
softener  
The machine stops automatically.  
If you have selected a programme which ends with the  
water of the last rinse left in the tub (programmes 7-8-9-  
10-13-14-15), drain the water before opening the door.  
Select programme 16 (drain) or 11 (short spin).  
If required, pour fabric softener into the compartment  
marked  
(the amount used must not exceed the  
“MAX” mark in the drawer).  
Close the drawer gently.  
The door is controlled by a safety device which releases  
2 minutes after the end of the programme.  
Switch the machine off by depressing the ON/OFF  
button again. The mains-on light goes out.  
Remove the laundry.  
When the programme has finished you are advised to  
unplug the appliance and turn off the water tap.  
C0024  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
DRYING 2.25 KG OF COTTON  
You have for example just machine-washed and spun at  
1000 rpm 4.5 kg (10 lb) of laundry.  
They are cotton fabrics of medium weight which you  
want to iron as soon as they are dry.  
4. Start the machine  
Depress the ON/OFF button, the mains-on light and  
drying light will illuminate and the machine starts  
operating.  
Switch off the machine.  
Then remove the laundry from the appliance and divide  
the items to obtain two loads of approx. 2.25 kg (5 lb)  
each.  
1. Load the laundry  
Open the door by pulling the catch outward.  
Load the items one at a time and close the door.  
T0003  
2. Select the programme  
Turn the programme selector dial clockwise to  
programme 6.  
5. At the end of the programme  
The machine stops automatically and the drying light  
goes out.  
6
The door is controlled by a safety device which releases  
2 minutes after the end of the programme.  
Switch the machine off by depressing the ON/OFF  
button again, the mains-on light goes out.  
If the laundry is still too damp, select a further brief  
drying time, bearing in mind that during the last 10  
minutes the appliance carries out a cooling and  
anticrease phase.  
P1006c  
3. Select the required time  
Remove the laundry.  
Following indications given in the programme chart on  
page 17, turn the time selector dial clockwise to the 60  
mins setting (black section).  
When the programme has finished you are advised to  
unplug the appliance and turn off the water tap.  
60  
80  
M0031S  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTODRYING 1 KG OF MIXED FABRICS  
You intend to wash and dry automatically 1 kg (2.2 lb)  
of mixed fabrics which do not need ironing.  
Proceed as follows:  
1. Load the laundry.  
2. Add the washing powder and fabric softener.  
6. At the end of the programme  
The machine stops automatically and the drying light  
goes out.  
The door is controlled by a safety device which releases  
2 minutes after the end of the programme.  
Switch the machine off by depressing the ON/OFF  
button again, the mains-on light goes out.  
3. Select the programme  
Turn the programme selector dial clockwise to  
If the laundry is still too damp, select a further brief  
drying time, bearing in mind that during the last 10  
minutes the appliance carries out a cooling and  
anticrease phase.  
programme 7.  
7
Remove the laundry.  
When the programme has finished you are advised to  
unplug the appliance and turn off the water tap.  
Do not use a dosing device when carrying out a  
NON-STOP programme.  
P1006d  
4. Select the required time  
Following indications given in the programme chart on  
page 17, turn the time selector dial clockwise to the 60  
mins setting (red section).  
60  
80  
M0031S  
5. Start the machine  
Depress the ON/OFF button: the mains-on light comes  
on and the machine starts operating.  
T0003  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing and Drying Hints  
Do NOT overload the machine. Weigh the laundry the  
Some stains such as fruit, wine, grass, rust etc. are  
first few times you use the appliance.  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
The average weights of the most common items are  
listed below as a guide:  
1000g = 1 kg  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Pillow case  
Tablecloth  
Serviette  
Do not leave the damp laundry load in a heap too  
long before drying.  
Tea towel  
70-120 g  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
Avoid drying dark clothes with light coloured fluffy  
items such as towels as these can attract the fluff.  
If you overdry the laundry, besides wasting energy,  
any subsequent ironing may become more difficult  
because the fabric could be heavily crumpled.  
Man’s shirt  
Apron  
Remove the laundry when the appliance has finished  
drying.  
To avoid a static charge when drying is completed,  
use either a fabric softener when you are washing the  
laundry or a fabric conditioner specifically for  
tumble dryers.  
Load the laundry loosely alternating large items with  
small ones.  
Particularly delicate items such as synthetic curtains,  
woollen and silk, garments with metal inserts, nylon  
stockings, bulky garments such as anoraks,  
bedcovers, quilts, sleeping bags and duvets must not  
be machine dried.  
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Avoid washing unhemmed or torn items as they may  
unravel.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
Garments padded with foam-rubber or materials  
similar to foam-rubber must not be machine dried;  
they represent a fire hazard.  
When washing curtains, remove the hooks.  
Also, fabrics containing residues of setting lotions or  
hair sprays, nail solvents or similar solutions must  
not be machine dried in order to avoid the formation  
of harmful vapours.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
For drying, follow the indications given on the  
manufacturer’s labels.  
When washing fabrics requiring different wash  
temperatures together, always select the lowest  
temperature.  
May be tumble dried  
White items should not be washed with coloured  
items.  
Drying at high temperature  
Drying at reduced temperature  
Do not tumble dry  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
Use a good quality detergent suitable for automatic  
washing machines.  
Important:  
As a dryer, the machine works on the condensation  
principle.  
Therefore, the water tap must be open and the  
drain hose must drain water into a sink or into  
the drain pipe, even during the drying cycle.  
Use the correct quantities of detergent.  
For wool, use gentle detergent only in small  
quantities.  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
And in which form?  
Not only are there different types of detergent, but they  
are also available in different forms. Whether you chose  
a powder or liquid in traditional or compact form is  
your own personal choice.  
Which detergent?....  
To ensure you obtain the best wash results from your  
appliance, it is important to use the right detergent in  
your everyday wash, and only detergents recommended  
for use in automatic machines.  
To maintain the appearance of your clothes and  
household textiles and to make them last longer you  
should use different types of detergent for different  
washes, whether for whites, colours or delicates.  
TRADITIONAL POWDERS  
Pour the powder directly into the dispenser drawer. Do  
not sprinkle powder onto clothes in the machine drum.  
TRADITIONAL LIQUIDS  
Liquid can be placed in the main wash compartment of  
the detergent drawer marked with the symbol  
the machine immediately upon placing the  
detergent in the dispenser drawer.  
WHITES  
We recommend the Ariel product  
range which is biological and  
designed to provide excellent  
cleaning and stain removal even  
at low temperatures.  
, start  
Alternatively the detergent is measured into the  
specially designed dosing device* which should be  
placed on top of the laundry, and at the back of the  
machine drum.  
NON BIOLOGICAL  
If you prefer to use a non  
biological detergent, which does  
not contain enzymes we  
recommend Fairy. Fairy provides  
good cleaning and stain removal.  
COMPACT POWDERS AND LIQUIDS  
Compact detergents (or concentrates as they are also  
known) are available in liquid or powder form, and  
generally require a smaller dosage. Follow the  
manufacturer’s instructions to ensure the most  
economical usage. Pour the detergent directly into the  
dispenser drawer, or alternatively measure the detergent  
into the specially designed dosing device* which  
should be placed on top of the laundry, and at the back  
of the machine drum.  
COLOUREDS  
For coloured items you should use a  
detergent which is designed to clean  
while maintaining the original colour.  
Ariel Color does not contain bleach  
and therefore helps to preserve  
colours.  
* If you use a dosing device in a washer dryer,  
please ensure the dosing device/ball is removed  
before carrying out a drying programme.  
DELICATE ITEMS  
FABRIC CONDITIONERS  
These are ideal for improving ‘softness’, and also  
reduce static cling on synthetics and make ironing  
easier. They are available in two types:  
When washing delicates such as  
woollens, you should use a product  
which is specially designed to care for  
fine fabrics.  
Dreft Automatic is suitable for  
woollens and other delicates.  
For example Lenor liquid fabric  
softener, for use in the washing  
machine/washer dryer. The  
liquid fabric softener should be  
poured into the compartment  
LAUNDRY BLEACH  
For additional stain removal you may  
wish to use a product such as Ace  
Gentle Bleach which is used in addition  
to your chosen detergent. Ace is  
suitable for all washable fabrics  
including silks, woollens and coloureds.  
marked with the symbol  
.
Follow the manufacturer’s dosage  
instructions and never exceed the  
MAX level.  
Bounce conditioning sheets for use  
in a tumble dryer. We recommend  
the conditioning sheets are pinned  
(using a safety pin) to an article  
of laundry and placed in the  
tumble dryer.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash Care Symbols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
FABRIC  
White Cotton or Linen  
without Special Finishes  
Normal (Maximum)  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colourfast at 60°C.  
Normal (Maximum)  
60  
50  
Nylon, Polyester/Cotton, Viscose  
with Special Finishes,  
Cotton/Acrylic Mix.  
Reduced (Medium)  
Normal (Maximum)  
Cotton, Linen or Viscose  
Colourfast at 40°C but not 60°C.  
40  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Reduced (Medium)  
Much Reduced (Minimum)  
Hand wash only  
Wool, wool mixtures, Silks  
Do not machine wash  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotton, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
TUMBLE DRYING  
with high heat setting  
with low heat setting  
May be tumble dried  
A cross through any symbol means «DO NOT»  
X
Important Notes  
For best results, always use the dispenser drawer for  
dispensing detergents and liquid additives.  
fabric conditioner to avoid the conditioner entering the  
machine prematurely.  
When using liquid detergent and a prewash programme,  
place the detergent into the correct compartment in the  
dispenser drawer, after the prewash has finished.  
Once the dispenser has been filled, close it by pushing it  
in gently. This is particularly important if you are using  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Programmes  
Programmes for cottons and linens  
Wash programme/  
Washing symbol  
Degree of soil  
and type of laundry  
Programme  
dial position  
Possible  
options  
Max.  
load  
Description  
Prewash at 40 °C  
Wash at 95°C  
3 rinses  
WHITES with For heavy soiled cotton  
PREWASH items.  
HALF LOAD 4.5 kg  
HALF LOAD 4.5 kg  
HALF LOAD 4.5 kg  
1
2
Long spin  
White cotton, for  
example normally soiled  
Wash at 95 °C  
3 rinses  
Long spin  
WHITES  
work garments, sheets,  
household linen,  
underwear, towels.  
Fast coloured cotton or  
linen fabrics, shirts,  
underwear, towels.  
Wash at 60 °C  
3 rinses  
Long spin  
FAST  
COLOURS  
3(*)  
Non fast coloured  
Wash at 40 °C  
3 rinses  
Long spin  
NON FAST cotton or linen fabrics,  
COLOURS shirts, blouses,  
underwear.  
HALF LOAD 4.5 kg  
4
5
Separate spin for  
Long spin  
Long spin  
4.5 kg  
cotton and linen items  
(*) This programme at 60°C with cold water filling is the reference programme for the Energy label according to  
EEC Directive 92/75.  
Important!  
• Some programmes, when selected, may start with a short drain. This is quite normal and not a fault of the machine.  
When a programme is selected, the selector dial will advance to the water filling position. E.g. Programme 2 is  
selected, there is a short drain. The appliance takes in water and the selector will appear to move to the 3 position.  
The appliance will have memorised the programme selected, in this case 2, and will run the correct programme  
even though the selector dial appears to be at position 3.  
We recommend that you do not to switch the appliance off and on during its operation. This would modify the  
memorised programme in progress with unsatisfactory washing results.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing Programmes  
Programmes for synthetics, mixed fabrics, wool and delicates  
Max.  
load  
Degree of soil  
and type of laundry  
Possible  
options  
Wash programme/  
Washing symbol  
Programme  
dial position  
Description  
Synthetic or mixed  
fabrics, underwear,  
coloured garments,  
non-shrink shirts,  
blouses.  
Wash at 50 °C  
3 rinses  
Water left in the tub  
MIXED  
FABRICS  
2 kg  
2 kg  
7
Lightly soiled  
synthetic or mixed  
fabrics  
Wash at 30 °C  
3 rinses  
Water left in the tub  
QUICK  
AND COOL  
8
9
Separate rinse cycle for  
synthetics and mixed  
fabrics  
3 rinses  
Water left in the tub  
Rinses  
2 kg  
2 kg  
2 kg  
1 rinse with fabric  
softener, if required  
Water left in the tub  
This programme can  
be used for softening  
hand washed garments.  
Conditioner  
rinse  
10  
11  
Separate spin for hand  
washed delicate items  
Draining of water  
Short spin  
-
Short spin  
Specially tested  
programme for wool  
garments bearing the  
“Pure new wool, non-  
shrink, machine  
Wash at 40 °C  
3 rinses  
Water left in the tub  
WOOL  
1 kg  
13  
washable” label.  
Wash at 40 °C  
3 rinses  
Water left in the tub  
Delicate fabrics, for  
example curtains  
DELICATES  
Rinses  
14  
15  
2 kg  
2 kg  
3 rinses  
Water left in the tub  
Separate rinse cycle for  
delicate and wool items  
For emptying out the  
last rinse water in  
programmes which end  
with water left in tub.  
Drain  
-
-
Draining of water  
16  
At the end of these programmes the machine stops with the water of the last rinse left in the tub to prevent the fabrics  
from creasing. To drain the water select programme “11” or “16”.  
When the automatic NON-STOP washing plus drying programme is used, the water is emptied out automatically and  
there is a short spin at 850 rpm before drying starts.  
Important!  
• Programmes 7 and 13, when selected, may start with a short drain. This is quite normal and not a fault of the  
machine.  
We recommend that you do not to switch the appliance off and on during its operation. This would modify the  
memorised programme in progress with unsatisfactory washing results.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drying Programmes  
Degree of drying  
Type of fabric  
Max. load  
Spin speed  
Drying time mins  
Black section  
1000  
1200  
1000  
1200  
80-90  
Cotton and linen  
(towels, T-shirts,  
bathrobes)  
2.25 kg  
1 kg  
70-80  
50-60  
40-50  
Programme 6  
Store dry (*)  
Suitable for items  
to put away  
Red section  
without ironing  
Synthetics and mixed  
fabrics (jumpers,  
blouses, underwear,  
household linen)  
1.5 kg  
1 kg  
850  
850  
90-100  
60-70  
Programme 12  
Black section  
1000  
1200  
60-70  
Cotton and linen  
(sheets, tablecloths,  
shirts, etc.)  
2.25 kg  
1 kg  
Iron dry  
Suitable for  
ironing  
50-60  
1000  
1200  
40-50  
30-40  
Programme 6  
(*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, in  
compliance with EC directive 92/75.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Cleaning  
Before any maintenance or cleaning is carried out you  
must DISCONNECT the appliance from the electricity  
supply.  
Descaling  
The water we use normally contains lime. It is a good  
idea to periodically use a water softening powder in the  
C0023  
C0027  
machine. Do this separately from any laundry washing,  
and according to the softening powder manufacturer's  
instructions. This will help to prevent the formation of  
lime deposits.  
Cleaning the drawer recess  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme  
without any clothes in the drum.  
After each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
preserve the door seal.  
Maintenance Wash  
With the use of low temperature washes it is possible to  
get a build up of residues inside the drum.  
We recommend that a maintenance wash be performed  
on a regular basis.  
P0038  
To run a maintenance wash:  
Cleaning the filter  
The drum should be empty of laundry.  
The water drain filter  
A clean filter is important for the correct operating of  
the machine, and should therefore be cleaned after every  
washing programme.  
Select the hottest cotton wash programme.  
Use a normal measure of detergent, must be a  
powder (such as Ariel Futur).  
Open the filter door and place a container underneath to  
catch any spillage. If the filter is blocked and the  
machine is unable to drain you will need to drain the  
water manually from the machine at this stage. To do  
this, unhook the drain hose from the standpipe or sink  
and hold the end of the hose over a bowl on the floor.  
The water should drain by gravity into the bowl. When  
the bowl is full, hook the hose back up and empty the  
bowl. Repeat the procedure until water stops flowing  
out.  
External cleaning  
Clean the exterior cabinet of the appliance with soap  
and water only, and then dry thoroughly.  
Cleaning the dispenser drawer  
The washing powder and additive dispenser drawer  
should be cleaned regularly.  
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to remove  
any traces of accumulated powder.  
To aid cleaning, the top part of the additive  
compartment should be removed.  
P0011  
P0132  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unscrew and remove the filter.  
The dangers of freezing  
Clean carefully under a fast running tap.  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
Turn off the water tap.  
Unscrew the inlet hose.  
Unhook the drain hose from the rear support and  
position the end of this hose and that of the inlet  
hose in a bowl. Run the draining programme.  
Disconnect the appliance.  
P0133  
P0040  
Screw the inlet hose and reposition the drain hose.  
When you intend to start the machine up again,  
Warning  
make sure that the room temperature is above 0°C.  
When the appliance is in use and depending on the  
programme selected there can be hot water in the filter.  
Never remove the filter during a wash cycle, always  
wait until the appliance has finished the cycle, and is  
empty. When replacing the filter, ensure it is securely  
retightened so as to stop leaks and young children being  
able to remove it.  
The water inlet filter  
If your water is very hard or contains traces of lime  
deposit, the water inlet filters may become clogged.  
It is therefore a good idea to clean them from time to  
time.  
Turn off the water tap. Unscrew the water inlet hose.  
Clean the filter using a hard bristle brush.  
Tighten up the inlet hose.  
P1090  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out  
an engineer. Before contacting your local Service Centre, please carry out the checks listed below.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation, a charge will be made even if the appliance is under guarantee.  
Symptom  
Possible causes  
The machine does not start  
The door has not been closed.  
The plug is not properly inserted in the power socket.  
There is no supply at the socket  
The main fuse or the fuse in the plug has blown.  
The selector dial is not correctly positioned.  
The ON/OFF  
button has not been depressed.  
The machine does not fill  
Ensure the water tap is open.  
The filters in the inlet hose is blocked.  
The inlet hose may be squashed or kinked.  
The door has not been closed.  
The machine fills then empties  
immediately  
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The machine does not empty and/or  
does not spin  
The drain hose may be squashed or kinked.  
A programme which ends with water in tub has been selected.  
The drain filter may be blocked.  
The drain hose extension, if fitted, is not correct. Follow the  
instructions for connecting to the waste.  
The drainage system pipes are blocked.  
The wash load is unbalanced: redistribute the clothes inside the drum to  
allow the machine to spin.  
There is water on the floor  
Too much detergent or unsuitable detergent has been used (creates too  
much foam).  
Check whether there are any leaks from one of the inlet hose fitting. It  
is not always easy to see this as the water runs down the hose; check to  
see if it is damp.  
The drain hose may be damaged or not securely positioned.  
The detergent dispenser drawer or recess is clogged.  
The drainage system pipes are blocked.  
Unsatisfactory washing results  
Too little detergent or unsuitable detergent has been used. An  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct wash programme has not been selected.  
Too much laundry has been placed in the drum.  
The machine vibrates when spinning  
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not stable and level (check diagonally).  
The washing load is badly distributed in the drum.  
Maybe there is very little laundry in the drum.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Possible causes  
The programme is still running.  
The door lock has not yet released.  
Water in the tub: the door cannot be opened if water is present in the  
The door will not open  
tub.  
The electronic unbalance detection device has cut in because the  
Spinning starts late or the machine  
does not spin  
laundry is not evenly distributed in the drum. The laundry is  
redistributed by reverse rotation of the drum. This may happen several  
times before the unbalance disappears and normal spinning can resume.  
If, after 10 minutes, the laundry is still not evenly distributed in the  
drum, the machine will not spin. In this case, redistribute the load  
manually and reselect the spin programme.  
The machine makes an unusual  
noise  
The machine is fitted with a type of motor which makes an unusual  
noise compared with other traditional motors. This new motor ensures  
a softer start and more even distribution of the laundry in the drum  
when spinning, as well as increased stability of the machine.  
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
The machine does not dry or does  
not dry properly  
The drying time has not been selected.  
The water tap are not turned on.  
The drain filter is clogged.  
The machine is overloaded.  
The selected drying time/section is not suitable for the laundry.  
Service & Spare Parts  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact your  
local Tricity Bendix Service Force Centre by  
telephoning:  
0870 5 929929  
Your telephone call will be automatically routed to the  
Service Force Centre covering your post code area.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042  
Customer Care  
For the address of your local Service Force Centre and  
further information about Service Force, please visit the  
Before calling out an engineer, please ensure you have  
read the details under the heading “Something Not  
Working”.  
For general enquiries concerning your Tricity Bendix  
appliance or for further information on Tricity Bendix  
products, please contact our Customer Care Department  
by letter or telephone as follows:  
Customer Care Department  
Tricity Bendix  
55-77 High Street  
Slough  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of fault  
4. The model and serial number of the appliance (found  
on the rating plate - see picture).  
Berkshire  
SL1 1DZ  
Tel 08705 950950*  
5. The purchase date  
* calls to this number may be recorded for training  
purposes.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee Conditions  
Standard guarantee conditions  
Exclusions  
We, Tricity Bendix undertake that if, within 12 months  
of the date of the purchase, this Tricity Bendix appliance  
or any part thereof is proved to be defective by reason  
only of faulty workmanship or materials, we will, at our  
option, repair or replace the same FREE OF ANY  
CHARGE for labour, materials or carriage on condition  
that:  
This guarantee does not cover:  
Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic.  
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to appliances  
outside the United Kingdom.  
The appliance has been correctly installed and used  
Appliances found to be in use within a commercial  
only on the electricity supply stated on the rating  
plate.  
environment, plus those which are subject to rental  
agreements.  
The appliance has been used for normal domestic  
Products of Tricity Bendixmanufacture which are  
purposes only, and in accordance with the  
manufacturer’s instructions.  
NOT marketed by Tricity Bendix.  
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
European guarantee  
If you should move to another country within Europe  
then your guarantee moves with you to your new home  
subject to the following qualifications:  
All service work under this guarantee must be  
undertaken by a Tricity Bendix Service Force Centre.  
Any appliance or defective part replaced shall become  
the Company’s property.  
The guarantee starts from the date you first  
purchased your product.  
This guarantee is in addition to your statutory and other  
legal rights.  
The guarantee is for the same period and to the same  
extent for labour and parts as exists in the new  
country of use for this brand or range of products.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside these  
hours in which case a premium will be charged.  
The guarantee relates to you and cannot be  
transferred to another user.  
Your new home is within the European Community  
(EC) or European Free Trade Area.  
The product is installed and used in accordance with  
our instructions and is only used domestically, i.e. a  
normal household.  
The product is installed taking into account  
regulations in your new country.  
Before you move please contact your nearest Customer  
Care Centre, listed below, to give them details of your  
new home. They will then ensure that the local Service  
Organisation is aware of your move and able to look  
after you and your appliances.  
France  
Germany  
Italy  
Senlis  
+33 (0)344 62 20 13  
+49 (0)800 234 7378  
+39 (0)800 11 75 11  
+46 (0)20 78 77 50  
+44 (0)1753 219898  
Nurnberg  
Pordenone  
Stockholm  
Slough  
Sweden  
UK  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Should the appliance power supply cable need to  
be replaced, this should be carried out by our  
Service Force Centre.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm  
60 cm  
57 cm  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230 - 240 V/50 Hz  
2050 W (10A)  
WATER PRESSURE  
Minimum  
Maximum  
50 kPa  
800 kPa  
MAX LOAD CAPACITY  
Washing  
Cotton, linen  
Synthetics  
Delicate fabrics  
Wool  
4.5 kg  
2 kg  
2 kg  
1 kg  
Drying  
Cotton, linen  
Synthetics  
2.25 kg  
1.5 kg  
SPIN SPEED  
Maximum  
1000 rpm (WDR 1040W)  
1200 rpm (WDR 1240W)  
CONSUMPTION DATA FOR WASHING  
4.5 KG NORMALLY SOILED COTTON  
ITEMS AT 60°C (PROGR. 3)  
Energy  
Water  
Time  
1.05 kWh  
60 litres  
140 mins  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fill all the holes with the plastic plugs supplied with the  
instruction booklet.  
Unpacking  
All transit bolts and packing must be removed  
before using the appliance.  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
Using a spanner unscrew and remove the two rear  
bottom screws. Slide out the two plastic pins.  
P1128  
P0002  
Lay the machine gently on its back, making sure that the  
hoses are not squashed.  
Important !  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
In case of moving out the same precautions as per  
paragraph “The dangers of freezing” must be taken i.e.  
the residual water in the hoses must be pumped out.  
Positioning  
P0001  
P1129  
Install the machine on a flat hard floor.  
Remove the polystyrene block from the bottom of the  
machine and release the two plastic bags.  
Very carefully slide out the left polythene bag, removing  
it towards the right and then downwards.  
Make sure that air circulation around the machine is not  
impeded by carpets, rugs etc. Check that the machine  
does not touch the wall or other kitchen units.  
Never place cardboard, wood or similar materials under  
the machine to compensate for any unevenness in the  
floor.  
1
Your new washer-dryer has been designed to be  
permanently plumbed in to your home’s water supply  
and drainage system. However, if this is not possible, it  
may be connected to suitable existing taps with the drain  
hose discharging into a sink.  
2
3
P1124  
P1126  
The appliance has two inlet hoses, hot and cold, with  
female 3/4” BSP thread connectors. If this connection is  
not compatible with the plumbing of the existing  
installation, a variety of connectors are available from  
good hardware stores and plumbers merchants to suit  
most domestic plumbing. Any alteration to your existing  
plumbing must be carried out by a competent person, or  
qualified plumber.  
Repeat the operation for the right polythene bag,  
removing it towards the left and then upwards.  
Installation on a Suspended Floor  
Suspended wooden floors are particularly susceptible to  
vibration. To help prevent vibration we recommend you  
place a waterproof wood panel, at least 15 mm thick  
under the appliance, secured to at least 2 floor beams  
with screws. If possible install the appliance in one of  
the corners of the room, where the floor is more stable.  
P1127  
Remove the polystyrene base.  
Set the machine upright and unscrew the remaining rear  
screw. Slide out the relevant pin.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water inlet  
Water drainage  
This appliance is designed to be permanently plumbed  
into your home's water supply and drainage system.  
Connect the hose to a tap with a 3/4” thread.  
Do not use previously used hoses for water connection.  
The appliance drain hose should hook into a standpipe,  
the hook in the drain hose is formed using the plastic  
“U-Piece” supplied.  
P1088  
Installation should comply with local water authority  
and building regulations’ requirements.  
The appliance must be connected to a cold water  
supply.  
The standpipe should have an internal diameter of  
approximately 38mm (see diagram) thus ensuring there  
is an air break between the drain hose and standpipe.  
A minimum water pressure of 50 kPa (0.5 bar) is  
required for safe operation of the appliance.  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
1
38 mm.(1/2") diameter  
standpipe  
There should be a minimum distance of 5.02m  
(16.5 ft) between the appliance’s inlet and the bottom of  
the water storage tank.  
Set the hose correctly by loosening the ring nut. After  
positioning the inlet hose, be sure to tighten the ring nut  
again to prevent leaks.  
P1040  
When discharging into a standpipe ensure that the top of  
the curve in the hose end is no more than 90cm (35.4'')  
and no less than 60cm (23.6'') above floor level.  
The upright standpipe should have a minimum length of  
30cm (12'') from the bottom of the elbow to the top of  
the pipe (see diagram).  
3 pin  
P0021  
P1130  
Make sure that it is designed in such a way, that the end  
of the drain hose cannot be covered with water.  
The drain hose may be extended to a maximum of 4  
metres. An additional drain hose and joining piece  
is available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you intend the drain hose to empty into a sink, make  
sure that the sink is empty and the plug hole is not  
blocked. Use the plastic “U-Piece” supplied.  
Special conditions  
If the floor is carpeted or covered with crumbly or soft  
material, insert a rigid support base under the feet to  
prevent noise, vibration or displacement. The base  
should protrude a few centimetres beyond the edges of  
the machine.  
Warning  
The machine should NOT be placed on deep pile  
carpeting.  
P0022  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
The drain hose must not be kinked.  
Levelling  
Level the washer-dryer by raising or lowering the feet.  
The feet may be tight to adjust as they incorporate a self  
locking nut, but the machine MUST be level and stable.  
In the interest of the  
environment  
Washer-dryers and dishwashers should be connected to  
the FOUL drainage system, the water will then be taken  
to a sewage works for treatment before being discharged  
safely into a river.  
It is essential that these appliances are not connected to  
the surface water drainage system as this water is  
discharged directly into a river or stream and may cause  
pollution.  
P1051  
If you require any further advice please contact your  
local water authority.  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, noise and  
displacement of the machine during operation.  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
SHOWER  
SINK TOILET  
BATH  
BIDET  
WASHING  
MACHINE  
DISHWASHER  
RAINWATER  
'RUN-OFF'  
FOUL DRAIN  
SURFACE WATER  
DRAINS & SEWERS  
FOUL SEWERS  
SEWAGE  
TREATMENT  
WORKS  
UNTREATED  
DISCHARGE  
TREATED  
DISCHARGE  
RIVER  
RIVER  
P0987  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The wire coloured blue must be connected to the  
terminal marked «N» or coloured black.  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray strands  
of wire present and the cord clamp must be secure over  
the outer sheath.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
The manufacturer declines any liability should  
this safety measure not be observed.  
WARNING:  
A cut off plug inserted into a 13 amp socket is  
a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliance’s  
rating plate. The rating plate is located at the top of the  
rim of the open door.  
Should the appliance power supply cable need to be  
replaced, this should be carried out by our Service  
Force Centre.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
Note  
When the appliance is installed the power supply cable  
must be accessible.  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042  
Permanent connection  
In the case of permanent connection it is necessary that  
you install a double pole switch between the appliance  
and the electricity supply (mains), with a minimum gap  
of 3mm between the switch contacts and of a type  
suitable for the required load in compliance with the  
current electrical regulations.  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363) fuse must  
be used.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The wires in the mains lead are coloured in accordance  
with the following code:  
The switch must not break the yellow and green earth  
cable at any point.  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
GREEN & YELLOW  
E
L
N
BROWN  
BLUE  
CORD CLAMP  
P1041  
The wire coloured green and yellow must be connected  
to the terminal marked with the letter «E» or by the  
earth symbol  
or coloured green and yellow.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tricity Bendix, 55-77High Street, Slough, Berkshire SL1 1DZ  
Consumer care telephone number 08705 950950  
© Electrolux plc 2002  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toshiba DVD VCR Combo D VR3SU User Manual
Transition Networks Switch SISTP10XX 141 LRT User Manual
Universal Remote Control Universal Remote UR5U BH8000 User Manual
Vanguard Heating Indoor Fireplace VMH26TN User Manual
Vermont Casting Indoor Fireplace DEF33CE User Manual
Vision Fitness Home Gym ST780 User Manual
Vivitar Telescope VIV TEL 76700 User Manual
VTech Baby Toy 3 in 1 smart wheels User Manual
Wagner SprayTech Pressure Washer 558025 User Manual
Walgreens Cable Box XVT423SV User Manual