|
INSTRUCTION BOOK
FORTRICITY BENDIX
COOKER HOOD
TBH 630
UK
cod. 4329329 06 - 010911
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
These warnings are provided in the interests of your safety. Ensure that you understand them all before
installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of
the meanings of these warnings contact the Customer Care Department.
•
•
Do not install above a cooker with a high level grill.
Installation
Any installation work must be undertaken by a
qualified electrician or a competent person.
•
•
Child Safety
This hood must be installed in accordance with the
installation instructions and all measurements must
be adhered to.
This appliance is designed to be operated by
adults. Children should not be allowed to tamper
with the controls or play with the appliance.
•
If the cooker hood is installed for use above a gas
appliance then the provision for ventilation must be
in accordance with the Gas Safety Codes of
Practice BS.6172, BS.5440 and BS.6891 (Natural
Gas) and BS.5482 (LP Gas) 1994, the Gas Safety
(Installation & Use) Regulations, the Building
Regulations issued by the Department of the
Environment, the Building standards (Scotland)
(Consolidated) Regulations issued by the Scottish
Development Department.
During Use
•
•
This product is for domestic use only.
Never leave frying pans unattended during use as
over-heated fats and oils might catch fire.
•
•
Never do flambé cooking under this cooker hood.
Do not leave naked flames under the hood.
•
The fan motor of this cooker hood incorporates a
cut-out device which will operate if the cooker hood
is installed below the minimum height
recommended under section ‘Clearance Height’, or
if the motor becomes overheated. If the cut-out
device is activated, switch off the fan motor and
allow the cooker hood to cool. The cut-out device
will reset itself when the fan motor has cooled
significantly.
Maintenance and Service
•
•
This appliance can be a hazard if the synthetic
paper and charcoal filters are not replaced as
recommended.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out
by inexperienced persons may cause injury or
more serious malfunction. Refer to your local
Tricity Bendix Service Centre. Always insist on
genuine spare parts.
•
•
•
It is dangerous to alter the specifications or modify
this product in any way.
When installed between adjoining wall cabinets the
wall cabinets must not overhang the hob.
If the room where the hood is to be used contains a
fuel burning appliance such as a central heating
boiler then its flue must be of the room sealed or
balanced flue type.
•
•
If other types of flue or appliances are fitted ensure
that there is an adequate supply of air to the room.
The ducting system for this appliance must not be
connected to any existing ventilation system which
is being used for any other purpose.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
YOUR APPLIANCE
OPERATING INSTRUCTIONS
This cooker hood is designed to extract
unpleasant odours from the kitchen,
it will not extract steam.
To obtain the best performance it is
advisable to switch on the hood a few
minutes before you start cooking and
leave it running for approximately 15
minutes after finishing.
The cooker hood controls are located on
the right hand side, in the front fascia
panel.
The Controls
Fan ON/OFF/Speed Control
Position 0 - Off
Position 1 - Low
Position 2 - Normal
Position 3 - Boost
Light ON/OFF control
0 - Off
1 - On
To Operate
Select the required fan speed and light if
required.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Extraction
The contaminated air enters the hood passing
through the grease filter and out through the
ducting into the atmosphere.
Recirculation
In the recirculation mode contaminated air is
passed through the charcoal filter (optional
extra) to be purified and recirculated into the
kitchen through a recirculation grille.
When the ducting position is selected the
charcoal filter is not required.
Never do flambé cooking under this cooker
hood.
Take extra care when frying and never leave
frying pans unattended during use as over-
heated fats and oils might catch fire.
Do not leave naked flames under the cooker
hood.
Ensure heating areas on your hob are covered
with pots and pans when using the hob and
cooker hood simultaneously.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
MAINTENANCE AND CLEANING
Before carrying out any maintenance or
cleaning isolate the cooker hood from the
mains supply.
The cooker hood must be kept clean, a build
up of grease or fat can be a fire hazard.
External Cleaning
Wipe the cooker hood frequently with warm
soapy water using a mild detergent.
Always wear protective gloves when cleaning
the hood.
Never use scouring pads or abrasive cleaners.
Never use excessive amounts of water when
cleaning particularly around the control panel.
Synthetic Paper Grease Filter
This filter cannot be washed and must be replaced at
least every 2 months.
The synthetic paper grease filter cannot be
cleaned.
It must not be washed.
To Replace the Synthetic Paper
Grease Filter
1.
2.
Open the glass visor.
Press inwardly on the two slide catches as
illustrated in (A) and the grille will open from
the front.
3.
Slide the right edge of the grille forward until it
clears the guide and then unhook the left hinge
pin.
4.
5.
Carefully ease out the metal wire retaining
clips as illustrated in (B).
Clean the metal grille and clips before
replacing the filter.
Handle the wire clips with care and keep away
from children as they have sharp points.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Charcoal Filter (Optional Extra)
The charcoal filter cannot be cleaned.
The filter should be replaced at least every
three months or more frequently if the hood
is used more than three hours per day.
To Remove/Replace the Charcoal
Filter
1.
2.
Remove the metal inlet grille.
Carefully twist the plastic disc anticlockwise,
while holding the charcoal filter securely.
Clean the metal inlet grille and motor support
before replacing the charcoal filter.
3.
Changing the Light Bulb
If a lamp fails to function check that the bulb is
screwed into the holder.
If bulb failure has occurred then it should be
replaced with a 220-240V 40W clear
cylindrical shape bulb with a small E14 screw
thread.
Charcoal filters, grease filters and light
bulbs can be obtained from your local
Service Centre.
This appliance can be a fire hazard if the
grease and charcoal filters are not cleaned and
replaced as recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
SOMETHING NOT WORKING
Symptom
Solution
The cooker hood will not start
•
•
Check the hood is connected to the electricity
supply.
Make sure the switch is in the ‘ON’ position.
The cooker hood is not working effectively
•
•
•
The fan speed is set high enough for the task
The grease filter is clean.
The kitchen is adequately vented to allow the
entry of fresh air.
•
•
If set up for recirculation, check that the
charcoal filter is still effective.
If set up for extraction, check that the ducting
and outlets are not blocked.
The cooker hood has switched off during
operation
•
•
The safety cut-out device has been tripped.
Turn off the hob and then wait for the device to
reset.
If after all these checks, the fault persists,
contact your local Tricity Bendix Service Centre,
quoting the model and serial number.
In-guarantee customers should ensure
that the above checks have been made as
the engineer will make a charge if the fault
is not a mechanical or electrical
breakdown.
Please note that it will be necessary to
provide proof of purchase for any
in-guarantee service calls.
SERVICE AND SPARE PARTS
If you require an engineer or spare parts
contact your local Service Centre by
telephoning:
For general assistance with your appliance or
for further information on Tricity Bendix products
please contact our Customer Care Department.
Customer Care Department,
Tricity Bendix
08705 929929
55-77 High Street
Slough
Your telephone call will be routed to your local
Tricity Bendix Service Centre. The addresses are
listed in the back of the book.
Berkshire SL1 1DZ
Telephone: 08705 950 950 *
* calls to this number may be recorded for training
purposes.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
GUARANTEE CONDITIONS
We, Tricity Bendix, undertake that if within twelve months of the date of the purchase this Tricity Bendix built-in
appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the
company will, at our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage
on condition that:
•
•
The appliance has been correctly installed and used only on the electrical supply stated on the rating plate.
The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
operating and maintenance instructions.
•
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not
authorised by us.
•
•
All service work under this guarantee must be undertaken by Tricity Bendix Service Centres.
Any appliance or defective part replaced shall become the property of this company.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
EXCLUSIONS
This Guarantee does not cover:
•
•
•
•
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
Costs incurred for calls to put right appliances improperly installed or calls to appliances outside the United
Kingdom.
Appliances found to be in use within a commercial environment, plus those which are the subject of rental
agreements.
Products of Tricity Bendix manufacture which are not marked by Tricity Bendix.
This guarantee is in addition to your statutory and legal rights.
TRICITY BENDIX EUROPEAN GUARANTEE
If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:
•
•
The guarantee starts from the date you first purchased your product.
The guarantee is for the same period and to the same extent for labour and parts as exists in the new country
of use for this brand or range of products.
•
•
•
This guarantee relates to you and cannot be transferred to another user.
Your new home is within the European Community (EC) or European Free Trade Area.
The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.
Before you move please contact your nearest Customer Care Centre, listed below, to give them details of
your new home. They will then ensure that the local Service Organisation is aware of your move and able
to look after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)3 44 62 22 22
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)20 78 77 50
+44 (0)1753 219898
Nurnberg
Pordenone
Stockholm
Slough
Sweden
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
9
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS
HEIGHT:
WIDTH:
DEPTH:
DEPTH WITH VISOR OPEN:
15cm
60cm
48cm
53cm
WEIGHT
GROSS:
NET:
7,00kg
6,00kg
ELECTRICAL SUPPLY:
POWER CONSUMPTION:
FAN MOTOR:
Voltage (50Hz)
220-240 V
115W
75W
LAMP:
40W
SUITABLE FOR INSTALLATION
ABOVE:
ELECTRIC HOB:
7KW (max)
GAS HOB:
SLOT-IN GAS COOKER
SLOT-IN ELECTRIC COOKER
10KW (max)
13.5KW (max)
12.4KW (max)
Note: CE Marking certifies that this appliance complies with the requirements
laid down in EEC directive 89:336. (Electromagnetic compatibility) and
subsequent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
WARNING: DOUBLE INSULATED-DO NOT
EARTH
This appliance is fitted with a 2 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4, fitted with a 3 A fuse is a
recommended mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
This appliance conforms to BS.800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker hood.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
INSTALLING THE COOKER HOOD
Please ensure that when the appliance is
installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the local
authorities requirements for the discharge of
exhaust air.
Incorrect installation may affect the safety of
this cooker hood.
Installation Requirements
Before installation check the wall to which the
cooker hood is to be fitted for electric cables,
water pipes or gas.
If it is necessary to fix the hood to a hollow
construction plaster or partition board
structure then it should be sufficiently
reinforced to be quite rigid in the area of the
cooker hood keyhole fixing screws, and the
appropriate rawl plugs used for this type of
fixing (not supplied).
Ducting
The ducting must be fire retardant 100mm (4ins)
in diameter and the length should be no
more than:
3 metres with one 90° bend
2 metres with two 90° bends
Bends of more than 90° will reduce the
efficiency of the hood and reduce the airflow.
Clearance Height
The cooker hood is designed to be fitted over
a cooking appliance at the clearance heights
stated, providing the maximum output of the
appliance beneath does not exceed the
maximums quoted in the Technical
Specifications.
If the output of the appliance below the
cooker exceeds the maximum output quoted,
please refer to the cooker manufacturer’s
installation instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Clearance Height
A minimum clearance height of 650mm
(25 1/2 ”) is required when installed above a
built-in electric hob, or 700mm (27 1/2 ”) when
installed above a built-in gas hob.
420 mm (min)
A minimum clearance height of 685mm (27”)
is required when installed above a slot-in
electric oven, or 787mm (30 1/2 ”) when
installed above a slot-in gas oven.
Hob
When installed between adjoining wall
cabinets, the wall cabinets must not overhang
the hob and the distance between the
underside of the cabinet and the worktop
must be 420mm. If the height of the wall
cabinet is less than 420mm a gap of 50mm
must be maintained either side of the hob.
A: Built-in Electric Hob:
B: Built-in Gas hob:
650mm minimum clearance
700mm minimum clearance
C: Slot-in Electric Cooker: 685mm minimum clearance
D: Slot-in Gas Cooker: 787mm minimum clearance
This cooker hood must not be installed above
a cooking appliance with a high level grill.
Unpacking
The fittings supplied to install this cooker
hood can be found with the instruction book
inside the packaging and consists of the following:
Wall/suspended fixing template
Ducting spigot 100mm (4”)
Wall Fitting
The cooker hood is fitted to the wall using the
keyhole slots in the back of the hood.
1.
Mark the position on the wall for the two 8mm
dia screw holes (A) as illustrated in the
drawing opposite at 568mm.
2.
3.
Check that the hole distances are correct and
are level using a spirit level.
At this stage it is important to allow 25mm (1”)
clear space above the cooker hood to enable it
to be hooked onto the screws and for
subsequent removal for decorating or
servicing.
4.
Insert the screws and tighten to a distance of
5mm.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Venting
The hood is more effective when used in the
extraction setting (ducted to the outside).
Venting kits may be purchased through your
retailer or DIY store, and must be ducted to
an outside vent of 100mm (4”) minimum.
The ducting used must be manufactured from
fire retardant material which should conform to
the relevant British Standard or DIN4102-B1.
When the hood is ducted externally the
charcoal filter must be removed and the
slider control must be in the ducting position.
To Fit the Ducting
1.
2.
Fit the ducting spigot and blanking plate, by
aligning the interlocking lugs on the fittings,
with the recesses in the aperture as illustrated
in (A) and (B) opposite.
Insert and turn anti-clockwise to lock the spigot
and blanking plate into position.
Recirculation
The charcoal filter (optional extra) must be
fitted for recirculation and the slider control
must be in the recirculation position.
Fitting the Cooker Hood to the
Wall
1.
2.
Remove the grille by pressing inwardly on the
two slide catches.
Hinge the grille forward to free it from the
guides in the side of the casing. The two
keyhole slots are now visible.
3.
4.
Hook the hood onto the screws (not supplied)
using the keyhole slots.
Tighten the screws to secure the hood to the
wall. Ensure the cooker hood is correctly
located before letting go.
5.
Refit the grille onto the cooker hood
- insert the left hand hinge pin into the hole in
the left hand side of the casing.
- slide the right hand hinge pin into the guide
over the stop position.
- close the grille and secure using the two slide
catch bolts.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
55-77 High Street - Slough
BERKSHIRE SL1 1DZ
© Electrolux Household Appliances Limited 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
|