This manual is for 2 different watches:
Armored
Triax
Armored
Triax
Regular
Super
These watches are really slick. They have a number of features not found
on most analog watches. Some of these features you may never use.
That’s OK!
Turn the crown so that the mode is set to TIME. As long as your watch
is set here, it will show the time of day.
Armored Triax
Regular
Armored Triax
Super
Mode Select
Mode Select
ENG
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ARMORED TRIAX SUPER Watch Diagram
A - START/STOP
B - LAP/RESET
C - SET MODE
(Crown)
D - Hour Hand
E - Minute Hand
F - 1/100 Second Hand
G - Second Hand
H - 24 Hour Hand
ENG
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ARMORED TRIAX REGULAR Watch Diagram
A - START/STOP
B - LAP/RESET
C - SET MODE
(Crown)
ENG
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME
In TIME
or TIME mode you can set the time.
If at any point the hands become out of sync,
reset them to the 12 o’clock position.
See Adjusting the Hand Position to reset them.
1. Pull the crown (C) out
2. Press A repeatedly to set the minute hand
3. Press B repeatedly to set the hour hand
4. Push the crown (C) back into normal
position
ENG
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CALENDAR (Super only)
In CALEN mode the month and date are indicated.
How to Read the Calendar
• The month is indicated by the hour and
minute hands
• The date is indicated by the second hand
How to Set the Calendar
1. Pull the crown (C) out
2. Press A to set the desired month
• It advances one month with each press of A
• The hands move quickly if A is held for 2 seconds.
• The calendar automatically adjusts for odd and even
months except February of leap years
3. Press B to set the desired date
• It advances on day with each press of B
• After 31, the hands automatically return to 1
4. Push the crown (C) back into normal position
ENG
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CHRONOGRAPH (Super) • STOP Watch (Regular)
In CHRO mode you can measure up to 23
hours 59 minutes and 59 seconds.
START/
In STOP W. mode you can measure up to
60 minutes in 0.2 second intervals.
STOP
Lap time measurement is also possible in
CHRO mode.
LAP/
RESET
The watch measures in 1/10 (0.1) second
increments for the first hour, and in one
second increments thereafter.
“Lap time” refers to an elapsed time required to
cover a distance from the start to a given point.
START/
STOP
The chronograph and stopwatch must be stopped to
reset.
LAP/
RESET
The CHRO and STOP W. will continue running if
you switch to a different mode.
ENG
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CHRONOGRAPH (Super) • STOP Watch (Regular)
In CHRO and CHRO .01 modes, the hands indicate
different time units depending on the mode in
use and the elapsed time.
START/
STOP
How to Read the Hands
• After 1 hour, the 24-hour hand
indicates the elapsed hours
LAP/
RESET
• After 10 minutes have elapsed, the
1/10 second hand pauses at the 12
o’clock position while the second and
minute hands are moving
• When the measurement is stopped or lap time
is measured, the 1/10 second hand indicates
the 1/10 seconds measured
START/
STOP
LAP/
RESET
• When the measurement is restarted or lap time
measurement is released, the 1/10 second hand
returns to rest at the 12 o’clock position
ENG
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1/100 (.01) second CHRONOGRAPH (Super only)
In CHRO .01 mode you can measure in
1/100 second increments.
Split time measurement is also possible.
START/
STOP
The elapsed 1/100 seconds are indicated
by the tail of the hour hand.
LAP/
RESET
How to Read the Hands
Measurement of less than 10 Minutes
• The 1/100 second hand pauses at the
12 o’clock position while the 1/10 second
and second hands are moving
• When the measurement is stopped or split time is
measured, the 1/100 second hand indicates the 1/100
seconds measured
• The 24-hour hand does not represent the lapse of time
• After 10 minutes has elapsed the 1/100 second and 1/10 second hands pause
at the 12 o’clock position while the second hand keeps moving
ENG
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1/100 (.01) second CHRONOGRAPH (Super only)
• When the measurement is stopped or split time is measured, the 1/100 second
and the 1/10 second hands indicate the 1/100 and 1/10 seconds measured
• When the measurement is restarted or the split time is released, the 1/100
second and 1/10 second hands return to rest at the 12 o’clock position
• Before changing the mode to CHRO to determine the measured hours and
minutes, be sure to read the measured 1/100 seconds, 1/10 seconds and
seconds in the CHRO .01 mode
• After the measurement exceeds 12 hours, read the 24-hour hand to determine
the elapsed hours
If the mode is changed to CHRO while the split time is measured, the split
time measurement will be released.
ENG
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Demonstration
In TIME mode (super) or DEMO mode (regular) you
can demonstrate the movement of the hands.
1. Keep A and B pressed simultaneously for
approximately 2 seconds
• The hands automatically turn clockwise and
counterclockwise
2. To stop the demonstration movement of the
hands, Press A or B
• The hands will return to indicate the
current time
ENG
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER (Regular only)
In TIMER mode you can set the timer
to count down from up to 60 minutes.
While in TIMER mode, the hands move
counterclockwise.
The timer continues to count down even if you
switch from TIMER mode to another mode.
Setting and Using the Timer
• Press B repeatedly to advance the minute hand
to the desired minute marker
• To set the timer for 60 minutes, set the hands to the
12 o’clock position
• Stop and restart of the timer can be repeated by pressing A
(a tone sounds)
• When the set time has expired, a tone will sound for approximately 5 seconds
• To stop the tone manually, Press A or B
• To reset the timer, first press A to stop the timer then press B to reset the
hands to the 12 o’clock position
ENG
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SET
In
SET mode you can set the alarm.
When the mode indicator is set to
SET, the hour, minute
and 24-hour hands move to indicate the alarm time.
Alarm Time Setting
• With each press of A, the minute hand advances one
minute
• With each press of B, the hour hand advances one hour
• The hands move quickly if A or B is held down for 2
seconds
• When setting the hour hand, check that the 24-hour
hand is set correctly
To Engage the Alarm
• Turn the crown (C) to set the mode indicator to TIME
mode
• The alarm rings at the designated time for 20 seconds
• To stop the alarm manually, press A or B
To Disengage the Alarm
• Turn the crown (C) to set the indicator to TIME mode
Alarm Sound Test
• Turn the crown (C) to set the indicator to TIME
• Press A and B simultaneously. The alarm will sound
mode
ENG
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Hand Position (Super)
If at 12:00 the hands do not line up exactly as they
should, reset them to the 12 o’clock position in
CHRO mode.
This procedure must be followed after changing
the battery to ensure proper watch operation.
1. Pull the crown (C) out
2. Press A to select the hand to be adjusted in
the following order: Second hand
• Minute hand
• Hour hand
• The hand to be adjusted will move clockwise
or counterclockwise and return to its original position
3. Press B to reset the selected hand to the 12 o’clock position
• The second hand moves in one second increments while the minute and hour
hands move slightly
• When resetting the hour hand to the 12 o’clock position check that the 24
hour hand indicates “24”
• The hands move quickly if B is held for 2 seconds
4. Push the crown (C) back into normal position
ENG
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Hand Position (Regular)
If at 12:00 the hands do not line up exactly as they
should reset them to the 12 o’clock position in
DEMO mode.
1. Pull the crown (C) out
2. Press A repeatedly to reset the minute hand to
the 12 o’clock position
• For quick advance, hold down A for 2
seconds
3. Press B repeatedly to reset the hour hand to
the 12 o’clock position
• For quick advance, hold down B for 2
seconds
4. Push crown (C) back into normal position
ENG
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Super
Regular
MODE LIMITS
Chronograph
23 hours 59’59”59
10 ATM
59’59”59
10 ATM
WATER RESISTANCE
TRIAX MATERIALS
Crystal
Case
Mineral Glass
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Mineral Glass
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Caseback
Strap
Buckle
BATTERY LIFE
Battery Type
SR927W
SR920W
Irregular movements of the second sweep hand indicate the battery needs to be
replaced. These irregular movements do not affect accuracy.
ENG
17
Download from Www.Somanuals.com. All Manuals Search And Download.
|