Toshiba TV DVD Combo SD V290 S TU User Manual

DVD VIDEO PLAYER &

VIDEO CASETTE RECORDER

SD-V290-S-TU

OWNER’S MANUAL

Before connecting, operating or adjusting this product,

please read this instruction booklet carefully and completely.

This device does not tape-record copy protected DVD Video Discs.

1-3

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR

FUTURE REFERENCE.

15. Attachments

Only use attachments/accessories specified by the manufacturer.

16. Accessories

Use only with the cart, stand, tripod, bracket, or

This set has been designed and manufactured to assure personal safety.

Improper use can result in electric shock or fire hazard. The safeguards

incorporated in this unit will protect you if you observe the following proce-

dures for installation, use, and servicing.

This unit does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE

EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

table specified by the manufacturer or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

PORTABLE CART

WARNING

17. Disc Tray

Keep your fingers well clear of the disc tray as it is closing. It can

cause personal injury.

18. Burden

Do not place a heavy object on or step on the product. The object

may fall, causing serious personal injury and serious damage to the

product.

1. Read These Instructions

All safety and operating instructions should be read before the

product is operated.

19. Connecting

2. Follow All Instructions

All operating and use instructions should be followed.

3. Keep These Instructions

The safety and operating instructions should be retained for future

reference.

4. Heed All Warnings

When you connect the product to other equipment, turn off the

power and unplug all of the equipment from the wall outlet. Failure

to do so may cause an electric shock and serious personal injury.

Read the owner’s manual of the other equipment carefully and fol-

low the instructions when making any connections.

20. Sound Volume

All warnings on the product and in the operating instructions should

be adhered to.

5. Power Sources

Reduce the volume to the minimum level before you turn on the

product. Otherwise, sudden high volume sound may cause hearing

or speaker damage.

This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power supply in your home, consult your product dealer or

local power company. For products intended to operate from bat-

tery power, or other sources, refer to the operating instructions.

6. Grounding or Polarization

21. Sound Distortion

Do not allow the product to output distorted sound for a longtime. It

may cause speaker overheating and fire.

22. Earphone

When you use the earphone, keep the volume at a moderate level.

If you use the earphone continuously with high volume sound, it

may cause hearing damage.

Do not defeat the safety purpose of the polarized plug has two

blades with one wider than the other. A grounding-type plug has

two blades and a third grounding prong. The wide blade or the

prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obso-

lete outlet.

23. Laser Beam

Do not look into the opening of the disc tray or ventilation opening

of the product to see the source of the laser beam. It may cause

sight damage.

24. Disc

7. Ventilation

Do not use a cracked, deformed, or repaired disc. These discs are

easily broken and may cause serious personal injury and product

malfunction.

Slots and openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from over-

heating. These openings must not be blocked or covered. The open-

ings should never be blocked by placing the product on a bed, sofa,

rug or other similar surface. This product should not be placed in a

built-in installation such as a bookcase or rack unless proper ventila-

tion is provided or the manufacturer’s instructions have been adhered

to.

25. Damage Requiring Service

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normal, or has been

dropped.

8. Heat

Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus (including amplifiers) that produce

heat.

26. Servicing

Do not attempt to service this product yourself as opening or

removing the cover may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service personnel.

9. Water and Moisture

Do not use this apparatus near water. For example: near a bath

tub, wash bowl, kitchen sink, Laundry tub, in a wet basement; or

near a swimming pool.

27. Replacement parts

When replacement parts are required, be sure the service techni-

cian has used replacement parts specified by the manufacturer or

have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

10. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Clean only with dry cloth.

11. Power-Cord Protection

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit

from the apparatus.

28. Safety Check

Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the

product is in proper operating condition.

12. Overloading

Do not overload wall outlets, extension cords, or integral conve-

nience receptacles, this can result in a risk of fire or electric shock.

13. Lightning

Unplug this apparatus apparatus during lightning storms or when

unused for long periods of time. This will prevent damage to the

product due to lightning and power-line surges.

14. Object and Liquid Entry

Never push objects of any kind into this product through openings

as they may touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of any kind

on the product.

1-5

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

z Time Search . . . . . . . . . . . . . . . . . . . . . . . . 30

z Selecting the sound enhancement . . . . . . . . 30

z Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 31

z Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

z Marker Search . . . . . . . . . . . . . . . . . . . . . . . 31

Special DVD Features . . . . . . . . . . . . . . . . . . . . 32

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Display Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Checking the contents of DVD Video discs: Menus . 32

z Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 32

z Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 32

z Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 32

z Changing the Audio Language . . . . . . . . . . . 32

z Changing the Audio Channel . . . . . . . . . . . . 32

z Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Operation with Audio CD . . . . . . . . . . . . . . . . . . . 33

Playing an Audio CD . . . . . . . . . . . . . . . . . . . . . 33

z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

z Moving to another Track . . . . . . . . . . . . . . . 33

z Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 33

z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

z Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

z Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 33

z Selecting the sound enhancement . . . . . . . . 33

z Changing the Audio Channel . . . . . . . . . . . . 33

Operation with MP3 Disc. . . . . . . . . . . . . . . . . . . . 34

Playing an MP3 disc . . . . . . . . . . . . . . . . . . . . . 34

z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

z Moving to another Track . . . . . . . . . . . . . . . 34

z Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 34

Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 34

Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 35

Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 35

z Moving to another File . . . . . . . . . . . . . . . . . 35

z Repeat All/ Off . . . . . . . . . . . . . . . . . . . . . . . 35

Operation with WMA Disc . . . . . . . . . . . . . . . . . . . 36

Playing an WMA disc . . . . . . . . . . . . . . . . . . . . . 36

z Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

z Moving to another Track . . . . . . . . . . . . . . . 36

z Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 36

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 37

Programmed Playback with Audio CD, MP3

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14

Connecting Antenna/Cable TV to a DVD+VCR . . 11

Basic TV Connections . . . . . . . . . . . . . . . . . . . . 12

Optional, Preferred TV Connections . . . . . . . 13-14

Before Operation - VCR Part . . . . . . . . . . . . . . 15-17

On-Screen Display(OSD) . . . . . . . . . . . . . . . . . . 15

Setting the On-Screen Display . . . . . . . . . . . . . . 15

Setting the VCR Setup Menu . . . . . . . . . . . . . . . 16

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . 16

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . 17

Before Operation - DVD Part . . . . . . . . . . . . . . 18-21

General Explanation. . . . . . . . . . . . . . . . . . . . . . 18

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 18

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 19-22

z General Operation . . . . . . . . . . . . . . . . . . . . 19

z Language . . . . . . . . . . . . . . . . . . . . . . . . . . 19

z Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

z Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

z Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

z Parental Control. . . . . . . . . . . . . . . . . . . . . . 21

Operation

Operation with tape . . . . . . . . . . . . . . . . . . . . . 22-28

Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . 22

Special Effect Playbacks . . . . . . . . . . . . . . . . . . 22

z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

z Still Picture and Frame-by-Frame Playback . 22

z Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 22

z Instant Skip . . . . . . . . . . . . . . . . . . . . . . . . . 22

VISS (VHS Index Search System) . . . . . . . . . . . 23

Normal Recording . . . . . . . . . . . . . . . . . . . . . . . 23

Timer Recording . . . . . . . . . . . . . . . . . . . . . . 24-25

One touch Timer Recording(OTR) . . . . . . . . . . . 25

Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . 26

Copying from DVD to VCR. . . . . . . . . . . . . . . . . 26

VHS Hi-Fi Stereo System/MTS Broadcast . . . . . 27

Tape Counter Memory Feature. . . . . . . . . . . . . . 28

Additional Information . . . . . . . . . . . . . . . . . . . . 28

z S-VHS Quasi Playback (SQPB) . . . . . . . . . . 28

z Auto Play System. . . . . . . . . . . . . . . . . . . . . 28

z Video Head Cleaning . . . . . . . . . . . . . . . . . . 28

z Blank Search . . . . . . . . . . . . . . . . . . . . . . . . 28

Operation with DVD and Video CD . . . . . . . . . 29-32

Playing DVD and Video CD . . . . . . . . . . . . . . . . 29

General Features. . . . . . . . . . . . . . . . . . . . . . . . 29

z Moving to another TITLE . . . . . . . . . . . . . . . 29

z Moving to another CHAPTER. . . . . . . . . . . . 29

z Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 29

z Still Picture and Frame-by-Frame Playback . 30

z Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

z Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

JPEG and WMA Discs . . . . . . . . . . . . . . . . . . . . 37

Programmed Playback with Video CD . . . . . . . . 37

z Repeat Programmed Tracks/All/Off . . . . . . . 38

z Repeat Programmed All/Off . . . . . . . . . . . . . 38

z Erasing a Track/File from Program List. . . . . 38

z Erasing the Complete Program List . . . . . . . 38

Additional Information - DVD Part . . . . . . . . . . . . 39

One Touch Replay . . . . . . . . . . . . . . . . . . . . . . . 39

Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 39

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 40-41

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 42

Country/Area Code List. . . . . . . . . . . . . . . . . . . . . 43

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-46

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

1-6

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Title (DVD only)

Playable Discs

The main film content or accompanying feature content

or music album.

DVD

(8 cm/12 cm disc)

Each title is assigned a title reference number enabling

you to locate it easily.

Video CD (VCD)

(8 cm / 12 cm disc)

Chapter (DVD only)

Audio CD

(8 cm/12 cm disc)

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number to

enable you to locate the chapter you want. Depending

on the disc, chapters may not be recorded.

In addition, this unit can play a DVD-R, CD-R or

CD-RW that contains audio titles, MP3 or JPEG files.

Track (Video CD and audio CD only)

Notes

Sections of a picture or a musical piece on a video CD

or an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

– Depending on the conditions of the recording equip-

ment or the CD-R/RW disc itself, some CD-R/RW

discs cannot be played on the unit.

– The unit cannot play discs that contain data other

than MP3 and CD-DA data.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

– Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal). It may result in malfunctions.

Scene

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into sec-

tions called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling

you to locate the scene you want.

A scene is composed of one or several tracks.

Notes on DVDs and Video CDs

Types of video CDs

There are two types of video CDs:

Some playback operations of DVDs and Video CDs

may be intentionally fixed by software manufacturers.

As this unit plays DVDs and Video CDs according to

disc content designed by the software manufacturer,

some playback features of the unit may not be avail-

able, or other functions may be added.

Refer also to the instructions supplied with the DVDs

and Video CDs. Some DVDs made for business pur-

poses may not be playable on this unit.

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures

of high resolution can be played if they are included in

the disc.

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs

allow playback of video pictures as well as sound, but

they are not equipped with PBC.

Regional code of the DVD+VCR and DVDs

This DVD+VCR is designed and manufactured

for playback of region 1 encoded DVD software.

The region code on the labels of some DVD

Remote control battery installation

discs indicates which type of DVD+VCR can

play those discs. This unit can play only DVD discs

labeled 1 or ALL. If you try to play any other discs, the

message “Check Regional Code” will appear on the TV

screen. Some DVD discs may not have a region code

label even though their playback is prohibited by area

limits.

Detach the battery cover on the rear of the

remote control, and insert two R03 (size

AAA) batteries with

correctly.

and

aligned

AAA

A A A

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Note on DTS-encoded CDs

When playing DTS-encoded CDs, excessive noise may

be exhibited from the analog stereo output. To avoid

possible damage to the audio system, turn down the

volume before playing back such discs, adjust the vol-

ume gradually, and keep the volume level low. To enjoy

DTS Digital Surround^TMplayback, an external 5.1 chan-

nel DTS Digital Surround^TMdecoder system must be

connected to the digital output of the unit.

Remote Control Operation Range

Point the remote control at the remote sensor and press

the buttons.

^zDistance: About 23 ft (7 m) from the front of the

remote sensor

^zAngle: About 30° in each direction of the front of the

remote sensor

1-7

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Precautions

Cleaning discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packaged at the factory.

When setting up the unit

Yes

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

About Symbols

About the

symbol display

Cleaning the unit

“

” may appear on the TV screen during operation.

To clean the cabinet

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

About the disc symbols for instructions

A section whose title has one of the following symbols are

applicable only to those discs represented by the symbol.

To obtain a clear picture

DVD DVD

The DVD+VCR is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

VCD2.0

Video CDs with the PBC (playback control)

function.

VCD1.1

Video CDs without the PBC (playback control)

function.

Audio CDs.

For details, please contact your nearest dealer.

MP3 MP3 Discs.

Notes on Discs

Setting the Output Source

You must select one of your output sources (DVD or

VCR) to view on the TV screen.

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

• If you want to view output source of DVD deck:

Press DVD on the remote or DVD/VCR on the front panel

until DVD indicator in the display window lights and output

source of DVD deck is viewed on the TV screen.

Do not stick paper or tape on the disc.

• If you want to view output source of VCR deck:

Press VCR on the remote or DVD/VCR on the front panel

until VCR indicator in the display window lights and output

source of VCR deck is viewed on the TV screen.

NOTES

Storing discs

• If you insert a disc when the DVD+VCR is in the VCR

mode, the DVD+VCR will be set to DVD mode

automatically.

• If you insert a cassette tape without prevention tab

when the DVD+VCR is in the DVD mode, the

DVD+VCR will be set to VCR mode automatically.

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

1-8

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel

Disc Tray (DVD deck)

Insert a disc here.

EJECT

Ejects the tape in the VCR deck.

Cassette Compartment (VCR deck)

Insert a video cassette here.

Remote Sensor

Point the DVD+VCR remote control here.

Display window

Shows the current status of the DVD+VCR.

OPEN/CLOSE

Opens or closes the disc tray.

CHANNEL ( / )

To scan up or

down through

memorized chan-

nels.

DVD/VCR indicator

Indicates the active deck.

DVD/VCR SELECT

Toggles control between the

DVD deck and the VCR deck.

LINE 2 (VIDEO IN/AUDIO IN

(Left/Right))

STOP

Stops playback.

Connect the audio/video output

of an external source (Audio

system, TV/Monitor, Another

VCR).

PLAY

To play back a recorded tape.

ON/STANBY

Switches the DVD+VCR ON and OFF.

REW

DVD: Go to beginning of current chapter/track or to previous chapter/track.

Press and hold for a fast reverse search.

VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.

FWD

DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.

VCR: Advances the tape during the STOP mode or for fast forward picture search.

REC

To record normally or to activate One-touch Timer Recording

by repeated presses.

1-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Window

DVD DVD inserted.

VCD Video CD inserted

CD Audio CD inserted.

A y B Indicates A-B repeat mode.

ALL Indicates repeat all mode.

ANGLE active.

MP3 MP3 disc inserted.

PROG. Programmed playback active.

TITLE Indicates current title number.

CHP/TRK Indicates current chapter or track number.

VCR DVD+VCR functions are available and channels

are selected at DVD+VCR.

TIMER DVD+VCR is in timer recording or a timer

recording is programmed.

REC DVD+VCR is Recording.

CDREC DVD to VCR copy is in

progress.

REC

HI-FI

PROG. TITLE CHP/TRK VCR TIMER

CDREC

ALL MP3

SAP CH

VCD

DVD

CH DVD+VCR is tuned to Channel XX.

SAP Indicates when a SAP BILINGUAL

broadcast is being received.

ST Indicates a stereo broadcast is

being received.

Indicates total playing time, elapsed time, remaining time or

current deck status (Playback, Pause, etc).

HI-FI Indicates the unit is playing back a tape recorded in Hi-Fi.

SP LP EP Displays the recording and playback speed.

AM Indicates AM time. (PM is not displayed.)

A cassette is in the VCR deck.

1-10

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

DVD/VCR select button

POWER

Select the output source (DVD or VCR)

to view on the TV screen.

Switches DVD+VCR ON and OFF.

EJECT, OPEN/CLOSE

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

0-9 numerical buttons

Selects numbered options in a menu.

INPUT SELECT

To select the VCR deck’s source (Tuner,

LINE 1, or LINE 2).

PROGRAM

Accesses or removes Program menu.

COUNT RESET, CLEAR

ANGLE ^z

Selects a DVD camera angle if

available.

- Resets tape counter to M 0:00:00

- Removes a track number on the

program menu or a mark on the

MARKER SEARCH menu.

SUBTITLE ^z

Selects a subtitle language.

AUDIO ^z

Selects an audio language (DVD) or an

audio channel (CD).

CLK/CNT, DISPLAY

Accesses On-Screen display.

Switches among the clock, tape counter

and tape remaining modes on the display.

INSTANT REPLAY ^z

Replays through 10 seconds of

playback.

BLANK SEARCH

Finds end points of recording.

PLAY ^z

Starts playback.

^zTOP MENU

Displays the disc’s Title menu, if

available.

REW ^z

Rewinds the tape during the STOP

mode or for fast reverse picture search.

FWD ^z

Advances the tape during the STOP

mode or for fast forward picture search.

SLOW ^z

^zMENU

Accesses menu on a DVD disc.

^zRETURN

- Removes the setup menu.

- Displays the menu of a video CD with

PBC.

Forward slow playback of tape.

^zZOOM

Enlarges DVD video image.

STOP ^z

Stops playback.

^zREPEAT

PAUSE/STILL, PAUSE/STEP ^z

Pause playback or recording

temporarily/press repeatedly for frame-

by-frame playback.

Repeat chapter, track, title, all.

^zA-B REPEAT, SP/SLP

- Repeats sequence.

- Selects recording speed

SKIP

^zMARKER

Skip to beginning of current chapter or track,

press twice in quick successions to go to

previous chapter or track.

Press and hold button for about two seconds

to search backward. (For DVD only)

Marks any point during playback.

^zVISS, SEARCH

- Enters the VISS function mode.

- Displays MARKER SEARCH menu.

^zRANDOM, INSTANT SKIP

- Plays tracks in random order.

- Fast forwards picture search through

30 seconds of recording.

^zREC/OTR

SKIP

Skip to next chapter or track.

Press and hold button for about two seconds

to search backward.(For DVD only)

Records normally or activates One

touch Timer Recording with repeated

presses.

SETUP, VCR MENU

Accesses or removes DVD setup menu

and VCR menu.

^zAUTO TRK

TV/VCR

To view channels selected by the VCR

tuner or by the TV tuner.

Adjusts automatically the tape’s picture

onscreen.

(left/right/up/down) ^z

- Selects an option in the menu

- CH/TRK (+/-): Selects channel of VCR.

Adjusts manually the tape’s picture

onscreen.

Note

This remote control use the same buttons for VCR and DVD

functions (ex. PLAY).

When using a VCR, first press the VCR button.

When using a DVD, first press the DVD button.

ENTER ^z

- Acknowledges menu selection.

- Displays functions on the TV screen.

1-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))

COMPONENT OUT (Y Pb Pr)

Connect to a TV with video and audio inputs.

Connect to a TV with Y Pb Pr inputs.

ANALOG OUT (Left/Right) (DVD OUT)

Connect to a TV, amplifier, receiver, or stereo system.

LINE 1 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an exter-

nal source (Audio system, TV/Monitor,

Another VCR).

Video Output Select Switch

Select either S-VIDEO or COMPONENT, depending

on how you connect DVD Player to the TV.

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV.

AC Power Cord

Plug into the power source.

DIGITAL AUDIO OUT (OPTICAL) (DVD OUT)

Connect to digital (optical) audio equipment.

DIGITAL AUDIO OUT (COAXIAL) (DVD OUT)

Connect to digital (coaxial) audio equipment.

UHF/VHF OUT (DVD/VCR OUT)

Connect to a TV with RF coaxial inputs.

UHF/VHF IN (ANTENNA INPUT)

Connect the VHF/UHF/CATV antenna to this terminal.

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

1-12

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Without Cable Box

Tips

If your cable wire is connected to your TV without a converter

or descrambler box, unscrew the wire from your TV and attach

it to the ANT.IN jack on the DVD+VCR. Use the supplied round

coaxial cable to connect between the DVD+VCR’s RF.OUT

jack and the 75 ohm antenna input jack on the TV. With this

connection, you can receive all midband, super band, and

hyperband channels.

Depending on your TV and other equipment you wish to

connect, there are various ways you could connect the

DVD+VCR. Use connections described on pages 11-14.

Please refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the best

connections.

For better sound reproduction, connect the DVD+VCR’s

DVD/VHS AUDIO OUT jack to the audio in jacks of your

amplifier, receiver, stereo or audio/video equipment. See

Optional, Preferred TV Connections on page 13-14.

With Cable Box

If a converter is required in your cable system, follow the

instruction below:

The cable hookup permits both TV and DVD+VCR operation.

Caution

To view or record CATV channel

1 Tune the TV to the DVD+VCR output channel (CH 3 or 4).

2 Set the DVD+VCR channel selector to the output channel of

the Cable Converter box by pressing the CH/TRK (+/-) or

number (0-9) of your DVD+VCR. (Example: CH3)

3 Select the channel to view at the Cable Converter Box.

Make sure the DVD+VCR is connected directly to the TV.

Tune the TV to the correct video input channel.

Do not connect the DVD+VCR’s DVD/VHS AUDIO OUT

jack to the phono in jack (record deck) of your audio

system.

Do not connect your DVD+VCR via your VCR. The DVD

image could be distorted by the copy protection system.

Notes

z With this connection, you CANNOT record one program

while viewing another.

z If you are using a cable box to tune channels, it is not nec-

essary to do Auto Channel Programming(Auto Channel Set)

as indicated on page 16.

Connecting Antenna/Cable TV to

DVD+VCR

Disconnect the antenna leads from the rear of the

TV.

Cable TV

Wall Jack

Identify the type of cable from your antenna. If it is

2 _{a round cable as illustrated, it is a 75 ohm coaxial}

antenna cable. This cable will connect directly to

the jack marked ANT.IN on your DVD+VCR.

Back Panel of

Typical Cable Box

Tip

If your antenna lead wire is a flat type antenna cable,

connect it to a Antenna Adaptor (300-ohm to 75-ohm)

(not supplied) and slip the Adaptor onto the ANT.IN

jack. The Adaptor does not screw on to the DVD+VCR,

it just slips over the jack.

Antenna

Cable TV

Wall Jack

Flat Wire

(300 ohm)

Rear of DVD+VCR

300/75 ohm

Adaptor

(Not supplied)

Rear of DVD+VCR

1-13

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Basic TV Connections

Rear of TV

ANTENNA

INPUT

VIDEO

INPUT

AUDIO INPUT

Make one of the following connections, depending on

the capabilities of your existing equipment.

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the

antenna in jack on the TV using the 75-ohm Coaxial

Cable supplied (R).

Note

If you use this connection, tune the TV to the

DVD+VCR’s RF output channel (CH 3 or 4).

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold

CHANNEL or CHANNEL on the front panel for

about five seconds.

It will turn itself on and “RF 03” or “RF 04” appears in the

display window.

2.Press CHANNEL or CHANNEL on the front

panel or CH/TRK (+/-) on the remote control to

change the RF output channel (CH 03 or CH 04).

3.Turn off and on the DVD+VCR.

Rear of DVD+VCR

4.Press the TV CH to 3 or 4 depending on the RF

output channel you had selected.

Now you can watch the DVD+VCR playback on CH3

or CH4 of your TV.

Audio/Video connection

Connect the DVD/VHS VIDEO OUT jack on the

DVD+VCR to the video in jack on the TV using the

video cable supplied (V).

Connect the Left and Right DVD/VHS AUDIO OUT

2 _{jacks on the DVD+VCR to the audio left/right in}

jacks on the TV (A1) using the supplied audio

cables.

Note

If you use this connection, set the TV’s source selector

to VIDEO.

1-14

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Optional, Preferred TV Connections

Rear of TV

S-VIDEO

INPUT

COMPONENT VIDEO INPUT

AUDIO INPUT

Notes

z You can ONLY watch and listen to DVD playback

through the connections shown below.

^zWhen using the COMPONENT VIDEO OUT jacks,

set the video output select switch to COMPO-

NENT. When using the S-VIDEO OUT jack, set the

video output select switch to S-VIDEO.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+VCR

to the S-Video in jack on the TV using the optional

S-Video cable (S).

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD+VCR to the audio left/right in jacks on the}

TV using the supplied audio cables (A2).

Component Video (Color Stream ) connection

Connect the COMPONENT VIDEO OUT jacks on

the DVD Player to the corresponding in jacks on

the TV using an optional Y Pb Pr cable (C).

Rear of DVD+VCR

Connect the Left and Right AUDIO OUT jacks of

2 _{the DVD+VCR to the audio left/right in jacks on the}

TV (A2) using the supplied audio cables.

Note

If the TV has an S-video input, connect the DVD player

with the S-video cable. When using an S-video cable,

do not connect the yellow video cable.

1-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Rear of DVD+VCR

Optional, Preferred TV Connections

Note

You can ONLY listen to DVD playback using COAXIAL

(X), OPTICAL (O) and AUDIO OUT (A2) connections.

The tuner and VCR will still be heard through the

RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See

page 12.)

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR

AUDIO OUT) jacks on the DVD+VCR to the audio left

and right in jacks on your amplifier, receiver, or stereo

system using the audio cables (A1, A2) supplied.

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/Video

receiver equipped with a multi-channel decoder

(Dolby Digital™, MPEG 2, or DTS)

COAXIAL

OPTICAL

AUDIO INPUT

DIGITAL INPUT

Amplifier (Receiver)

Connect one of the DVD+VCR’s DIGITAL AUDIO

OUT jacks (OPTICAL O or COAXIAL X) to the cor-

responding in jack on your amplifier. Use an option-

al digital (optical O or coaxial X) audio cable.

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VHS IN 1 or AV INPUT jacks on the

DVD+VCR to the audio/video out jacks on your

accessory component, using the optional audio/video

cables.

You will need to activate the DVD+VCR’s digital

2 _{output. (See Digital Audio Output on page 20).}

Accessory Component:

VCR, Camcorder,

Video Camera,

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD+VCR (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Satellite Receiver,

Laser Disc Player

Jack panel of Accessory

AUDIO

OUTPUT

Caution:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

VIDEO

OUTPUT

Notes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

– To see the audio format of the current DVD in the on-

screen display, press AUDIO.

Rear of DVD+VCR

Front of DVD+VCR

1-16

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR Part

On-Screen Display (OSD)

Some of these functions will be displayed every time the

VCR is operated.

Easy Information

If the Extended Data Service (XDS) signals are provided

along with normal TV signal in your area or during play-

back of a tape recorded with Extended Data Service

(XDS) signals, the station ID, program title and program

details are shown on the TV screen.

❶

❷

❸

❹

❺

When viewing a channel with Extended Data Service

(XDS) signals, press ENTER then the station ID will

appear on the TV screen. Press ENTER again and the

program details will appear on the TV screen.

When viewing a tape recorded with Extended Data

Service (XDS) signals, press ENTER twice then the pro-

gram title and program details will appear on the TV

screen.

PLAY

HI-FI

CH 4

STEREO

JUL 5 , SAT

2:15 PM

❻

❼

❶ TAPE SPEED DISPLAY

Shows the current tape speed.

❷ FUNCTION DISPLAY

PROGRAM DETAILS

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a

program.

RATING: Indicates the rating of the current program

(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The

rating N/A means that the motion picture ratings are not

applicable to this program.

Indicates the function in progress.

❸ HI-FI DISPLAY

Indicates when this unit is playing back tape recorded with

Hi-Fi.

❹ CHANNEL DISPLAY

Indicates the selected channel (or LINE1, LINE2).

PROGRAM DETAILS

“Home video”

❺ STEREO/SAP DISPLAY (MONO is not displayed)

Shows the type of audio signal received by the VCR tuner.

❻ DATE DISPLAY

WABC

STEREO

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

“Home video”

JUL 5 , SAT

2:15 PM

Shows the current date. (Month/Date/Day of the week

format)

Easy Information Screen

(Program details)

Easy Information Screen

(Station ID)

❼ CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, the tape counter and remaining time

on the tape.

Setting the On-Screen Display

The SETUP, clock setting, and timer recordings are

accessed conveniently with On-Screen Menu Displays

that lead you through each step. The following pages

describe the On-screen selections to be set.

Each press of the ENTER changes the TV screen in the

following sequence.

STOP

STEREO

Menu Selection

Your VCR allows remote control adjustment of several

features.

JUL 5 , SAT

2:15 PM

Press VCR MENU and the MAIN menu will

appear.

2:15 PM

0:35:40

Select the desired menu with

button and

REM 1:58

2 _{then press ENTER.}

Note

Notes

Menus remain on-screen for 3 minutes.

z The function displays can be seen displayed on the TV

screen for 5 seconds.

z The clock (or tape counter, tape remaining) mode will contin-

ue until you press ENTER.

MAIN MENU

CLOCK SET (page 17)

PROGRAM (page 24)

TUNING (page 16)

SETUP (page 16)

z The tape counter and the remaining tape length indicator

appear only when a cassette is inserted. Also, the remaining

tape length indicator appears after any tape operation.

Press VCR MENU when finished.

1-17

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR Part (Continued)

Setting the VCR Setup Menu

Channel Selection

This DVD+VCR is equipped with a frequency

synthesized tuner capable of receiving up to 181

channels. These include VHF channels 2-13, UHF

channels 14-69 and CATV channels 1-125.

Press VCR MENU and the MAIN menu will

appear.

Press

to select the SETUP menu, then

2 _{press ENTER.}

Preparation:

The SETUP menu will appear.

^zConnect the DVD+VCR to the desired type of antenna or

cable TV system, as shown in Connecting Antenna/Cable TV

to DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

Press VCR MENU and the MAIN menu will

appear.

Press

to choose a desired option on the

Press

to select the TUNING menu, then

3 _{SETUP menu. Then press}

to choose a

2 _{press ENTER.}

desired setting.

The TUNING menu will appear.

FUNCTION OSD

The on-screen display of this DVD+VCR can be turned on or off.

z FUNCTION OSD can be switched between ON and OFF by

pressing

LANGUAGE SELECT

The on-screen programming of this DVD+VCR can be

displayed in either English, Spanish, or French.

z LANGUAGE SELECT can be switched among ENGLISH,

Press to choose the SOURCE SELECT option,

SPANISH and FRENCH by pressing

3 _{then press}

to select TUNER.

AUDIO MODE

Press

and LINE2.

repeatedly to switch among TUNER, LINE1

The DVD+VCR has two separate audio playback systems, the

high quality VHS Hi-Fi system and standard NORMAL mono sys-

tem. The same audio is generally recorded on both systems. The

VHS Hi-Fi system plays on separate (left and right) channels, and

the NORMAL system plays monaural sound. The normal track is

always played so the cassette can be played on a DVD+VCR that

does not have VHS Hi-Fi.

Press

to choose the AUTO CHANNEL SET

4 _{option, then press}

to set the channel.

The tuner will automatically cycle through all

available channels in the area and place them in

the tuner’s memory.

AUDIO MODE can be switched between HI-FI and

After the AUTO CHANNEL SET PROCEEDING is

NORMAL by pressing

5 _{complete, make sure the TUNING BAND is set}

BROADCAST TYPE (STEREO/SAP/MONO)

appropriately (TV or CATV) by pressing

choosing the correct TUNING BAND (TV or

and

Multichannel Television Sound (MTS) carries stereo and/or

Second Audio Program (SAP) bilingual signals. Set this display to

the desired position when both MTS stereo and SAP signals are

received. When only one of the MTS signal is received, the

DVD+VCR automatically selects the corresponding receiving

mode (Stereo or SAP) regardless of the selected position. For

normal operation, the display should be in the STEREO position.

The DVD+VCR will then record a STEREO program when available,

and record a mono program IF the program is NOT IN STEREO.

For weak STEREO and/or SAP broadcasts, changing the dis-

play to mono may give clearer sound.

CATV) by pressing

menu.

using the TUNING

Remember, TV is for the air antenna reception,

CATV is for cable or wireless cable connection.

Press VCR MENU to return to the TV screen.

Use CH/TRK (+/-) or CHANNEL ( / ) on the

front panel to cycle the DVD+VCR through the

channels in memory.

z BROADCAST TYPE can be switched among STEREO, SAP,

and MONO by pressing

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from

memory manually.

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is

in HI-FI position] for selecting the audio output signals from the

AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi-

tion, so that when a stereo tape is played, the stereo sound will

be heard through the left and right channels. If a mono tape is

played and the audio output is set to stereo, the same mono

sound will be heard from both left and right channels.

Press to choose the CH. ADD/DEL option on the

TUNING menu. Press

add or erase.

to select a channel to

Press ENTER to add or erase the channel.

Repeat steps 1 and 2 to add or erase channels.

z AUDIO OUTPUT can be switched among STEREO, LEFT,

and RIGHT by pressing

Press VCR MENU to return to the TV screen.

Press VCR MENU when finished.

1-18

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - VCR Part (Continued)

Setting the Clock

Note

There are cases where the TV station does not send or sends

The DVD+VCR gives you two ways to set the time and

date: the Auto Clock Feature or manually. The Auto

Clock Feature enables the DVD+VCR to set up the clock

when the DVD+VCR is turned off.

wrong date and/or time information and the DVD+VCR sets the

incorrect time.

If this happens we recommend that you set the clock manually.

Manual Clock Set

Things to know before starting

The clock uses the 12-hour system. (Be sure to set AM

Example: JULY 5, 2003 ; 2:15 AM

and PM correctly.)

The initial Clock Setting is JANUARY 1, 2003, 12:00 AM.

Press VCR MENU and the MAIN menu will

appear.

Auto Clock Set

Press

to choose the CLOCK menu.

The Auto Clock Set feature is set to ON at the factory. In the

ON setting, the DVD+VCR looks for a channel carrying XDS

(Extended Data Services) information. XDS updates the clock

using the Coordinated Universal Time.

2 _{Press ENTER and the CLOCK menu will appear.}

The Auto Clock Feature enables the DVD+VCR to set up

the clock when the DVD+VCR is turned off.

Press VCR MENU and the MAIN menu will

appear.

Press

to choose the month.

Press

to choose the CLOCK menu.

2 _{Press ENTER and the CLOCK menu will appear.}

Press to choose the DAY option.

4 _Use

to choose the day.

The day of the week will display automatically.

Press to choose the YEAR option.

5 _Use

to choose the year.

Press to choose the TIME option.

6 _Use

to choose the time.

Press to choose the AUTO CLOCK SET option.

Press and hold

continuously.

to advance clock

3 _Press

to choose ON.

The Auto Clock Set feature is set to ON at the factory. In

the ON setting, the DVD+VCR looks for a channel

Press ^Eto choose the DAYLIGHT SAVINGS

item.

carrying XDS (Extended Data Services) information. XDS

updates the clock using the Coordinated Universal Time.

Use

to choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR sets the clock when the

Daylight Saving Time is started and ended.

Press to choose the DAYLIGHT SAVINGS

4 _item.

Press

to choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR sets the clock when the

Daylight Saving Time is started and ended.

Press to choose the TIME ZONE item.

5 _Press

to choose the correct time zone

(AUTO, EASTERN, CENTRAL, MOUNTAIN,

PACIFIC, ALASKA or HAWAII).

Press VCR MENU when finished.

Note

If setting the clock manually, “AUTO CLOCK SET” must

set to “OFF”.

If set to “ON”, an incorrect date and/or time will be

entered again when the DVD+VCR is turned off.

If “AUTO” is selected as the time zone, the VCR sets the

clock using the first Coordinated Universal Time informa-

tion it finds in a broadcast signal.

Press VCR MENU when finished.

Turn off the DVD+VCR and the auto clock set-

ting works.

1-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part

General Explanation

This manual gives the basic instructions for operating

the DVD+VCR. Some DVDs require specific operation

or allow only limited operation during playback. When

Temporary Feedback Field Icons

TITLE

Repeat Title

CHAPT

Repeat Chapter

TRACK

Repeat Track (non-PBC Video CDs

this occurs, the symbol

appears on the TV screen,

and Audio CD only)

indicating that the operation is not permitted by the

DVD+VCR or is not available on the disc.

ALL

Repeat Disc (non-PBC Video CDs

and Audio CD only)

On-Screen Display

The general playback status can be displayed on the

Repeat A-B

OFF

Repeat Off

TV screen. Some options can be changed on the menu.

Resume play from this point

Action prohibited or not available

On-screen display operation

Press DISPLAY during playback.

Notes

z Some discs may not provide all of the features on the

on-screen display example shown below.

z If no button is pressed for 10 seconds, the on-screen

display disappears.

Use

to select an option.

2 _{The selected option will be highlighted.}

Use

to change the setting of an option.

3 _{The number buttons can also be used for setting}

numbers (e.g., title number). For some functions,

press ENTER to execute the setting.

DVD

Options

Function (Press

to select desired option)

Selection Method

Title Number

Shows the current title number and total number of

, or

1/3

1/12

titles, and skips to the desired title number.

Numeric, ENTER

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

, or

Numeric, ENTER

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

Numeric, ENTER

0:16:57

Audio language

and Digital Audio

Output mode

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

ENG

, AUDIO

5.1 CH

Subtitle language

Shows the current subtitles language, and

OFF

1/1

, SUBTITLE

, ANGLE

changes the setting.

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

Sound

Shows the current sound mode, and

changes the setting.

NORM.

VCD1.1

VCD2.0

Items

Function (Press

to select desired item)

Selection Method

Track Number

Displays the current track number, total number of tracks

and PBC On mode, and skips to the desired track number.

, or

1/4

Numbers, ENTER

Time

Displays the elapsed playing time (Display only)

0:16:57

–

Audio Channel

Sound

Displays the audio channel, and

STER.

changes you make to the audio channel.

Displays the current sound mode, and

any changes you make to the setting.

NORM.

1-20

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part (Continued)

Picture

Initial Settings

You can set your own Personal Preferences on the

DVD+VCR.

TV Aspect DVD

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays theatrical images with masking bars

above and below the picture.

4:3 Panscan: Select when a standard 4:3 TV is con-

nected. Displays pictures cropped to fill your TV screen.

Both sides of the picture are cut off.

General Operation

Press SETUP.

The setup menu appears.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

16:9 Wide: Select when a 16:9 wide TV is connected.

French

Rating

German

Spanish

Italian

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Area Code

Disc Subtitle

Disc Menu

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Chinese

Polish

Rating

Area Code

Hungarian

Russian

Other — — — —

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Use

to select the desired option.

2 _{The screen will show the current setting for the}

Others

selected option, as well as alternate setting(s).

While the desired option is selected, press

3 _then

to select the desired setting.

Press ENTER to confirm your selection.

4 _{Some options require additional steps.}

Press SETUP, RETURN, or PLAY to exit the

5 _{setup menu.}

Language

Disc Language DVD

Select a language for the disc’s Menu, Audio, and Subtitle.

Original : The original language set for the disc is selected.

Other : To select another language, press number buttons to enter

the corresponding 4-digit number according to the language code

list on page 42. If you enter the wrong language code, press

CLEAR.

Notes

Disc Language selection may not work for some DVDs.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

French

Rating

German

Spanish

Italian

Area Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Chinese

Polish

Hungarian

Russian

Other — — — —

Others

Menu Language

Select a language for the setup menu. This is the menu

you see when you press SETUP.

English

Spanish

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Progressive Scan

Digital A dio O tp

1-21

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part (Continued)

Dynamic Range Control (DRC)

Sound

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

Digital Audio Output

Each DVD disc has a variety of audio output options.

Set the DVD+VCR’s Digital Audio Output according to

the type of audio system you use.

DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if

you connected the DVD+VCR’s DIGITAL AUDIO OUT

jack to a Dolby Digital decoder (or an amplifier or other

equipment with a Dolby Digital decoder).

Stream/PCM: Select Stream/PCM if you connected the

DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier

or other equipment with a DTS decoder, Dolby Digital

decoder or MPEG decoder.

PCM: Select when connected to a 2 channel digital

stereo amplifier. The DVD+VCR output sounds in the

PCM 2ch format when you play a DVD video disc

recorded with a Dolby Digital, MPEG1, or MPEG2

recording system.

Vocal

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

DOLBY

_DIGITAL/PCM

Stream/PCM

PCM

Disc Audio

Disc Subtitle

Disc Menu

Rating

B.L.E. (Black Level Expansion)

Area Code

Sample Freq.

48 KHz

TV Aspect

To select the black level of playback pictures. Set your

preference and monitor’s ability.

On: Expanded grey scale. (0 IRE cut off)

Off: Standard grey scale. (7.5 IRE cut off)

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

96KHz

Others

Pluge (Blacker than Black)

Sample Frequency

For proper adjustment of your television brightness

settings utilizing a commercially available test disc.

On: Select when you adjust the level of your TV using a

commercially available test disc that contains pluge

signals.

To change the Sample Frequency setting, first select

the desired Digital Audio Output as indicated as above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. When this choice is

made, this unit will automatically convert any 96KHz

signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling

96KHz signals, select 96KHz. When this choice is

made, this unit will pass each type of signal through

without any further processing.

Off: For normal use.

DNR (Digital Noise Reduction)

You can reduce ambient noise in the picture.

DNR1: Normal level

DNR2: Expanded level.

Off:

Off.

Others

Notes

The DRC, Vocal, PBC, B.L.E., Pluge and DNR settings

can be changed.

– Actual picture enhancement may vary depending on the

quality of the disc.

z Press

to select the desired item and press

– While the DNR2 (expanded level) can provide additional

improvement in the reduction of noise in the video signal, it

may produce undesirable picture artifacts on some discs.

Should this occur, select a more appropriate DNR level (nor-

mal or off).

– Depending on the disc, some picture detail may be lost by

the picture enhancement.

– A DVD audio disc with Dolby Digital or DTS soundtrack may

be played, some DVD audio discs include moving pictures

which may be modified by the above processes.

ENTER. The setting of the selected item alternates

between On and Off.

DRC On

Vocal On

PBC On

B.L.E. Off

Pluge Off

DNR Off

Disc Audio

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

1-22

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - DVD Part (Continued)

Parental Control

DVD

Area Code

Enter the code of a country/area whose standards were

used to rate the DVD video disc, referring to the list

(See “Country/Area Code List”, page 43.).

Rating DVD

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Code Set

Disc Audio

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Disc Audio

Others

Disc Subtitle

Disc Menu

Rating

Select Area Code using the

setup menu.

buttons on the

Area Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

While Area Code is selected, press

Follow step 3 of “Rating” on left.

Select the first character using the

Unlock

Change

Others

Select Rating on the Setup menu using

buttons.

While Rating is selected, press

Press to shift to second character and select

5 _{the second character using}

buttons.

Press ENTER to confirm your Area code

When you have not entered a password yet.

6 _{selection, then press SETUP to exit the menu.}

3 _{Enter a 4-digit password using the numbered but-}

tons to create a personal 4-digit security password,

then press ENTER. Enter the 4-digit password again

and press ENTER to verify.

Note

Confirmation of the 4-digit password is necessary when

the password is changed (see Changing the 4-digit

password below ).

When you have already entered a password;

Enter a 4-digit password using the numerical but-

tons to confirm the personal 4-digit security pass-

word, then press ENTER.

Changing the 4-digit password

If you make a mistake before pressing ENTER, press

CLEAR and enter 4-digit security password again.

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old password, then press ENTER.

3 Select Change using

buttons then press

Select a rating from 1 to 8 using

buttons.

ENTER.

4 _{Level 1 : DVD software for adults cannot be}

4 Enter the new 4-digit password, then press ENTER.

5 Enter exactly the same password a second time and

verify by pressing ENTER.

played back.

Level 8 : All DVD software can be played back.

The limitation will be more severe as the level

number is lower.

6 Press SETUP to exit the menu.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

If you forget your 4-digit password

Ratings 1 to 8: Some discs contain scenes not suit-

able for children. If you set a rating for the DVD+VCR,

all disc scenes with the same rating or lower will be

played. Higher rated scenes will not be played unless

an alternative scene is available on the disc. The alter-

native must have the same rating or a lower one. If no

suitable alternative is found, playback will stop. You

must enter the 4-digit password or change the rating

level in order to play the disc.

If you forget your password, clear the current password

by following the procedure below.

1 Press SETUP to display the setup menu.

Move the cursor down to “Rating”.

2 Use the Number buttons to enter “210499”. The

cursor will move up to “Disc Audio” automatically.

The 4-digit password is cleared.

3 Enter a new password as shown above to the left

(Rating).

Press ENTER to confirm your rating selection,

5 _{then press SETUP to exit the menu.}

1-23

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape

Normal Playback

Preparation:

^zTurn on the TV.

This function lets you quickly and visually search for a

desired tape section in either direction: forward and

reverse.

^zTune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.

1 Press REW or FWD during playback.

The DVD+VCR will be activated in the SEARCH

mode.

z If the DVD+VCR is left in the SEARCH mode for more

than 3 minutes, the DVD+VCR will automatically enter the

PLAY mode, to protect the tape and video heads.

2 To return to playback, press PLAY.

If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to VIDEO.

^zSet the Output Source to VCR as shown in Setting the

Output Source on page 6.

Insert a prerecorded video cassette.

The

indicator will light and the DVD+VCR will

power-up automatically.

Still Picture and Frame-by-Frame

Playback

z Make sure that the TIMER indicator in the display

window is not lighted. If it is, press POWER once.

z If a tape without a safety tab is inserted, the unit will

start playback automatically.

1 Press PAUSE/STILL during playback.

Still picture will appear on the TV screen.

z If a still picture vibrates vertically, stabilize it by pressing

CH/TRK (+/-) on the remote control.

z If the DVD+VCR is left in the STILL mode for more than 5

minutes, the DVD+VCR will automatically enter the STOP

mode to protect the tape and video heads.

Press PLAY once.

2 _{PLAY appears on the TV screen .}

z It is not necessary to select the tape speed for play-

back. It will be automatically selected by the DVD+VCR.

z In playback, the TV/VCR selector switches to VCR

mode automatically.

2 Press PAUSE/STILL repeatedly to advance the

video picture one frame at a time while viewing a still

picture.

Press STOP to stop playback.

3 _{STOP appears on the TV screen.}

z If the tape reaches the end before STOP is pressed, the

DVD+VCR will automatically stop, rewind, eject, and it

will turn itself off.

3 To return to playback, press PLAY.

Slow Motion

1 Press SLOW during playback or still mode.

The tape will be played back at a speed 1/19 times

slower than the normal speed.

z During slow playback, use CH/TRK (+/-) on the Remote

Control to minimize noise bands.

z If slow motion mode continues for more than 3 minutes,

the DVD+VCR will automatically change to playback

mode.

Tracking Control

Auto Tracking

The automatic tracking function adjusts the picture to

remove snow or streaks.

The AUTO TRACKING function works in the following

cases:

z When the AUTO TRK button is pressed.

z A tape is played back for the first time.

z Tape speed (SP, LP, SLP) changes.

z Streaks or snow appear because of scratches on the tape.

2 To return to playback, press PLAY.

Instant Skip

This is useful for skipping commercials or short program

segments.

1 Press INSTANT SKIP during the playback mode.

The tape will fast forward picture search through 30

seconds of recording.

z The skipping time can be extended by pressing INSTANT

SKIP.

z Subsequent presses result in advancing the fast forward

picture search time by 30-second increments (maximum 3

minutes).

Manual Tracking

If noise appears on the screen during playback, press

either CH/TRK (+/-) on the remote control or

CHANNEL ( / ) on the front panel until the noise on

the screen is reduced.

z In case of vertical jitter, adjust these controls very carefully.

z Tracking is automatically reset to normal when the tape is

ejected or the power cord is unplugged for more than 3 sec-

onds.

Special Effect Playbacks

2 When the search is completed, the DVD+VCR will go

into playback mode automatically.

Special effects playback notes

z Horizontal lines (noise bars) will appear on the TV screen. This

is normal.

z The audio is automatically muted during special effect modes,

so there is no sound during search.

z During the high-speed picture search modes, a short period is

needed to stabilize tape speed when re-entering the PLAY

mode. Slight interference may be observed during this period.

1-24

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

VISS (VHS Index Search System) Normal Recording

The VHS INDEX SEARCH SYSTEM enables you to

locate the beginning of any recording made on this VCR.

Whenever a recording begins, an invisible INDEX mark is

recorded on the tape.

Preparation:

^zTurn on the power of both the DVD+VCR and TV.

^zTune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO.

^zIf a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to

VIDEO.

VISS Scan

VISS SCAN lets you search out each VISS mark on the

recorded tape and play 5 seconds before advancing to

the next VISS mark.

Insert a video cassette that the safety tab intact.

Select the desired channel by using CH/TRK

2 _(+/-).

Insert a cassette tape that has VISS signals

marked.

Press the VISS button once during PLAYBACK

^zIf you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the

LINE1 or LINE2 by pressing INPUT SELECT.

2 _{or STOP mode.}

The VISS -- indicator will appear in the display win-

dow.

Set the desired recording speed (SP or SLP) by

3 _{pressing SP/SLP.}

Press either the FWD or the REW button.

3 _{The VISS SCAN will start. The indicator appears}

simultaneously during scanning. The tape will be

rewound or rapidly advanced to the next signal

marked.

^zThis DVD+VCR is not designed to record in LP mode.

Set the MTS mode as desired (See page 17, 27).

Press REC/OTR once.

5 _{Recording will start. (The REC indicator will light in}

The tape will be played back for approximately 5

seconds, and then rewound or rapidly advanced to

the next VISS signal.

z Press VISS or STOP button to stop the VISS SCAN

mode.

the display window.)

^zREC indicator appears only when the Output Source is

set to VCR.

^zIf a cassette with no safety tab is loaded, the cassette

will be ejected automatically.

At the desired program, press the PLAY button.

4 _{Normal playback of that program will begin.}

Press STOP to stop recording.

If the tape reaches the end before STOP is pressed, the

DVD+VCR will automatically stop, rewind, eject, and it will

turn itself off.

VISS Search

You can locate the desired program and play it back

automatically by designating the number of its VISS sig-

nal. Up to the 99th VISS signal from the preset position

on the tape can be located.

To pause the recording

1 Press PAUSE/STILL to pause the tape during

recording.

The REC indicator will flash in the display window.

Press the VISS button once during PLAYBACK

or STOP mode.

The VISS -- indicator will appear in the display win-

dow.

2 When you want to continue recording, press

PAUSE/STILL or press REC/OTR.

^zAfter 5 minutes in pause mode, the tape will be stopped

automatically to protect the tape and the video heads.

Enter the number of VISS signals you wish to

2 _skip.

To record one TV program while

watching another

1 Press TV/VCR to select the TV mode during record-

ing.

The VCR indicator disappears.

2 Using the TV, select the channel to be viewed.

Up to 99 signals may be skipped from any given

position on the tape.

Press either the FWD or REW button once.

3 _{The SrCH 02 (for example) message appears in the}

display window. When the desired VISS signal is

found, playback begins automatically.

z If the end of the tape is reached during forward VISS

search, the VCR will automatically stop, rewind, eject,

and turn itself off.

Tips

Always use PAUSE/STILL for best results when making

changes during recording.

For example: To change channels during recording, first press

PAUSE/STILL to put the unit in pause mode. Then select the

desired channel on the DVD+VCR, and press PAUSE/STILL

again to resume recording.

1-25

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Timer Recording

This DVD+VCR can be programmed to record up to 8

programs within a period of 1 year. For unattended

recording, the timer needs to know the channels to be

recorded and the starting and ending times.

Use to choose the SPEED option.

Use

to choose the desired recording

speed (AUTO, SP or SLP).

^zAUTO mode determines how much tape is left and

switches speed from SP to SLP, if necessary, to

complete recording the program. There will be some

picture and sound distortion at the point of the speed

change.

Things to know before starting

If you try to set the program timer before setting the clock,

Use to choose the REPEAT option.

Use

to choose the desired repeat (ONCE,

PLEASE SET THE CLOCK appears for a moment and

then CLOCK menu appears on the TV screen. Set the time

and date before proceeding.

WEEKLY or DAILY).

ONCE event....for recording up to 8 programs on a

single day or over the days within a period of 1 year.

WEEKLY event....for recording up to 8 programs on a

certain day of every week.

Make sure a tape is in the DVD+VCR and the safety tab is

in place or the tape will be automatically ejected.

DAILY event....for recording up to 8 programs at the

same time(s) Monday through Friday.

Preparation:

^zTurn on the power of both the DVD+VCR and the TV.

Be sure the TV is set to the DVD+VCR output channel (3 or 4).

^zMake sure the TUNING BAND in the TUNING menu is set

appropriately (TV or CATV).

Press VCR MENU and the MAIN menu will

appear.

Tip

Use

to choose the PROGRAM menu.

If the input data is wrong, use to select the data

and correct it using / .

Press ENTER to go to the PROGRAM menu.

3 _{The PROGRAM menu will appear.}

Press VCR MENU, the program will be memo-

rized at the DVD+VCR.

^zTIMER indicator lights in the display window.

^zIf the program preset time is past, the PAST TIME

PROGRAMMED message will appear on the TV

screen. Return to the incorrect program and program

it with the correct time.

^zIf all programs have already been entered, FULLY

PROGRAMMED message will appear for a moment

and then PROGRAM 1 will appear on the TV screen.

^zIf you had entered a past date, the timer recording

will be performed on that date of the next year.

^zAdditional programs may be entered by repeating

steps 1-12.

Cable Users: If your cable hookup is via a TV convert-

er box, you can program multiple recordings only on

the converter box output channel. This is because the

converter determines what channel you view through

your DVD+VCR.

Use

to choose the PROGRAM No. (1-8).

Use to choose the MONTH option.

5 _Use

to choose the desired month.

Use to choose the DAY option.

Tip

6 _Use

to choose the desired day.

If you have finished programming and you want to set the

DVD+VCR to record the programs you have entered.

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE

DVD+VCR. The DVD+VCR is now set to record the preset

programs.

Use to choose the START option.

Use

Press and hold

Use to choose the STOP option.

to choose the desired start time.

to advance the clock faster.

8 _Use

to choose the desired stop time.

Press and hold to advance the clock faster.

Use to choose the CHANNEL option.

Note

If the power fails or the DVD+VCR is unplugged from the AC

outlet, the correct clock time and timer settings are kept in

memory for approximately 3 seconds. After 3 seconds, the

clock and program timer must be reset when power is

restored. Reset the clock according to instructions.

9 _Use

to choose the desired channel

(Channel, LINE1 or LINE2).

Cable Users: If you have CABLE TV and used Cable Box

in Connecting Antenna/Cable TV to DVD+VCR (page 11),

using a cable box converter, you must set the channel in

this step to match the cable box output channel (usually

CH 3 or 4). Change channels on the cable box instead of

with the DVD+VCR.

After setting a timer recording, it will start if a timer recording

passes over the start time when stopping the playback or

recording.

1-26

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Set the desired recording speed (SP or SLP) by

3 _{pressing SP/SLP.}

Checking (Erasing) the Timer Program

Programming can be checked whenever the DVD+VCR

is turned on.

The tape speed will appear on the TV screen.

Press REC/OTR twice.

1 Press VCR MENU and the MAIN menu will appear.

The menu as illustrated, will appear on the TV screen.

z Recording will start. (The TIMER indicator will light)

2 Use

to choose the PROGRAM menu.

Press ENTER and the PROGRAM menu will appear.

Press REC/OTR repeatedly to select the

5 _{recording time length.}

At the end of the recording, the DVD+VCR will stop

recording and shut off.

z During One touch Timer Recording, changing the chan-

nel on the DVD+VCR will not be possible.

z You can stop the recording by pressing STOP.

ONE TOUCH TIMER RECORD MENU

3 Use

to select a program you want to check or

erase. If you want to erase the program, press

0H30M ..... 9H00M ➝ 0H00M

ONE TOUCH TIMER RECORD

CLEAR.

CHANNEL

SPEED

Length Display

(each additional press of

REC/OTR increases

4 Press VCR MENU to return to the TV screen.

START

LENGTH

NOW

0H30M

Program Priority

recording time 30 minutes)

If the recording start and end

times of preset programs

overlap on the same day (see Checking the Recording Time

the example and diagram

left), program number 2 will

not be recorded until program

Press REC/OTR once to check the recording time. The

recalled setting will automatically return to the TV

screen after 6 seconds.

number 1 is finished.

The first part of program number 2 will not be recorded.

The same thing will happen to program number 3.

To extend the Recording Time

The recording time can be extended anytime by press-

ing REC/OTR.

Subsequent presses result in advancing the recording

time by 30-minute increments to a maximum fo 9 hours.

One touch Timer Recording(OTR)

Notes

One touch Timer Recording allows you to make a

recording easily of a preset length without using the

program timer.

z If you press PAUSE/STILL during One touch timer recording,

the DVD+VCR will enter the recording pause mode. Instant

timer recording is cancelled.

z If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to

normal recording mode.

Preparation:

z Turn on the power of both the DVD+VCR and the TV.

z Be sure the TV is tuned to the DVD+VCR output channel (3

or 4).

z If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to

VIDEO.

Insert a video cassette with the safety tab intact.

Select the desired channel by using CH/TRK

2 _{(+/-) or number (0-9).}

The channel number appears on the TV screen.

z If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the

LINE1 or LINE2.

1-27

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Dubbing and Editing

Copying from DVD to VCR

If you wish to edit or dub your camcorder (or another

VCR) recordings to this DVD+VCR, the rear (or Front)

panel mounted Audio and Video (A/V) input jacks

make the connections quick and easy. These direct

A/V jacks will also provide better picture results than

using the RF jack on the rear panel.

This unit allows you to copy the contents of a DVD to a

VHS tape.

Note

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted

to copy Macrovision encoded DVDs. “Lock” is

displayed in the display window.

Connect the camcorder’s (or another VCR’s) A/V

outputs to your DVD+VCR as illustrated on page

14.

Insert Disc

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

Set the input channel “LINE2”. (press INPUT

2 _{SELECT to select LINE2.)}

Insert VHS Tape

^zIf you have connected your DVD+VCR to the A/V

input jacks on the rear of DVD+VCR, you should

select the input channel LINE1 by pressing INPUT

SELECT twice.

2 _{Insert a blank VHS video tape into the VCR deck.}

Press PLAY on the DVD deck.

3 _{The DVD will go into play mode}

z If the DVD disc menu appears, you may need to press

the PLAY manually to begin copying.

Play the tape in the camcorder (or another

3 _{VCR). If you have a TV attached to your}

DVD+VCR, you can see the video playing.

Press REC on the VCR deck.

z The DVD+VCR will go into Record mode.

When your desire recording begins, press

z “CDREC” indicator will light.

4 _{DVD+VCR’s REC/OTR once to start.}

Stop the Copy Process

When the DVD is finished playing, press the VCR on the

remote control and then press STOP ( ) to end the copy.

You must stop the Copy process manually when the DVD

movie ends, or the unit may replay and record over and

over again.

Note

Before recording, please confirm the recording start position.

Note

When you stop the DVD playback during copying, the record-

ing on VCR is stopped automatically.

1-28

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

VHS Hi-Fi Stereo System/

MTS Broadcast

MTS (Multi-Channel TV Sound)

This DVD+VCR will decode MTS stereo and bilingual

(SAP) off-the-air broadcast sound signals. It also

decodes stereo TV sound from local cable companies,

as long as they operate on assigned cable frequencies

and use the EIA-recommended MTS stereo/bilingual TV

sound system.

This DVD+VCR is equipped with the VHS Hi-Fi audio

sound system for recording and playback. The informa-

tion below gives a brief description of Hi-Fi audio and

how to record and play a tape in the Hi-Fi audio mode.

Playback with Hi-Fi Stereo Audio Sound

Multichannel TV Sound Indicator (MTS)

A stereo TV with AUDIO/VIDEO input jacks or a stereo

audio system is required for true stereo playback. To

experience the full and rich stereo sound available with

Hi-Fi recorded tapes, we recommend the connection of

this unit to a home stereo audio system.

Shows Onscreen as illustrated below when ENTER is

pressed.

One or both of the indicators will light, depending on the

MTS broadcast.

TV screen

STEREO

Lights up when a stereo broadcast

is being received.

CH 4

STEREO/SAP

Set the AUDIO MODE option to HI-FI on the

SETUP menu .

SAP

Lights up when a SAP BILINGUAL

broadcast is being received.

If only STEREO appears on the TV screen.

The DVD+VCR can record in stereo onto the VHS Hi-Fi audio

tracks when the BROADCAST TYPE option is in the STEREO

position. The DVD+VCR will also record mono audio onto the

mono audio track.

If only SAP appears on the TV screen.

Set the AUDIO OUTPUT option to STEREO

Set the BROADCAST TYPE option to SAP.

2 _position.

If STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE option to select the desired

recording mode (STEREO or SAP).

(STEREO) POSITION: The left channel sound (L) is

heard from the left speaker and the right channel sound

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard

from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard

from both speakers.

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which

is used for a second language or additional information.

When the station broadcasts a Second Audio Program,

follow the procedure below to record the SAP.

Insert a video cassette with the safety tab intact.

Set the BROADCAST TYPE option to SAP

2 _{(SETUP menu).}

Do this if only the SAP appears on the TV screen or you

know the program will use the SAP.

Press VCR MENU.

Insert a cassette and press PLAY.

4 _{Adjust volume at your stereo system.}

Press VCR MENU.

Set the desired recording speed (SP or SLP) by

4 _{pressing SP/SLP.}

Select the desired channel. The SAP should

5 _{appear on the TV screen.}

Press REC/OTR once

You are now recording the program you see and hear on the

TV.

Press STOP to stop recording.

1-29

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with tape (Continued)

Tape Counter Memory Feature

Additional Information

In manual recording, Timer recording, One-touch Timer

Recording, playback, or fast forward modes, the DVD+VCR

automatically starts rewinding the tape at the end of the

tape. The cassette will stop at the beginning of the tape and

be ejected, and the DVD+VCR will turn itself off.

Real-Time Counter

Shows length of tape run in hours, minutes, and sec-

onds. Press CLK/CNT to select the real-time counter

display.

Every press of CLK/CNT changes the TV screen as

illustrated below.

After you have finished using the DVD+VCR, rewind, eject,

and remove the cassette. Place the cassette in its protec-

tive sleeve to protect it from dust. It is not necessary to

rewind the cassette before removing it, but if you do, it will

be ready to play or record the next time you use it.

2:15 AM

CLOCK

0:05:25

COUNTER

REM 1:07

Be sure the DVD+VCR Channel Selector is on the correct

channel you wish to record. The channel that is being

recorded can always be checked by setting the television

on the DVD+VCR channel (3 or 4) and pressing the

TV/VCR selector to turn the DVD+VCR’s VCR indicator on.

REMAINING TIME

Counter changes to “0:00:00” when the cassette is

ejected.

The real-time counter does not operate if nothing is record-

ed on the tape.

The real-time counter will not work unless a tape is

inserted.

Do not attempt to hook up more than one television set to

the DVD+VCR for either recording or playback.

S-VHS Quasi Playback (SQPB)

Counter Memory Function

This is useful if there is a section of tape you want to

view immediately after recording or if you want to return

to the same point several times.

This DVD+VCR can also play back a tape which is record-

ed in S-VHS playback picture.

This DVD+VCR cannot record in S-VHS format

SQPB is an abbreviation for S-VHS Quasi Playback.

Begin recording or playing a tape.

Auto Play System

This DVD+VCR features automatic playback.

Load a cassette (with the safety tab removed).

Press CLK/CNT repeatedly to display the real-

2 _{time counter appears on the TV screen.}

At the point that you want locate later, reset the

3 _{real-time counter to “0:00:00” by pressing}

COUNTER RESET.

The Output Source is changed to VCR mode automattically.

The power turns on automatically and playback begins.

At the end of the tape, the DVD+VCR stops, then rewinds.

The cassette is ejected after rewinding and goto standby.

Continue to play or record.

LOAD

AUTO

Press STOP when recording or playback finish-

AUTO

PLAY

AUTO

REWIND

5 _es.

TAPE

EJECT

Press REW.

6 _{The tape automatically stops when the tape counter}

returns to about “0:00:00”.

Video Head Cleaning

Whenever a video cassette is inserted into or ejected from

Tape Remaining

This function allows the time of the remaining tape to be

displayed during recording or playback.

Press CLK/CNT until the REM indicator displays on the

TV screen during recording or playback.

this unit the video head is automatically cleaned.

However, it is possible that the heads may become clogged

when playing an old or damaged tape. If the image on your

screen resembles the picture on the left while playing back

a tape, the heads may require cleaning.

To clean the heads, obtain a head cleaning tape from your

local video dealer. Follows the instructions that come with

the cleaning tape, as excessive use can shorten head life.

Note

The remaining tape length indicator may not be displayed

correctly depending on the condition of the tape and the kind of

the tape (T-140, T-160, or T-210 etc)

Blank Search

The Blank Search enables you to locate the end of any

recording. Whenever a recording creates, a blank con-

tent is recorded on the tape.

Press BLANK SEARCH during playback or in the stop

mode and rapidly advanced to find blank content.

To find next blank content, press BLANK SEARCH

again.

1-30

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

Playing DVD and Video CD

General Features

VCD2.0

VCD1.1

Playback Setup DVD

Note

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

z Turn on the TV and select the video input source con-

nected to the DVD+VCR.

z Audio system: Turn on the audio system and select

the input source connected to the DVD+VCR.

^zSet the Output Source to DVD as shown in Setting

the Output Source on page 6.

1/3

Moving to another TITLE DVD

When a disc has more than one title, you can move to

another title as follows:

Press OPEN/CLOSE to open the disc tray.

Press DISPLAY when playback is stopped, then

press the appropriate numbered button (0-9) then

press ENTER to select a title number.

Load your chosen disc in the tray, with the label

2 _{facing up.}

When a double-sided DVD is inserted, make sure

the side you want to play is facing down.

Moving to another CHAPTER/TRACK

1/12

1/3

Press OPEN/CLOSE to close the tray.

3 _{“dISC LOAD” appears in the display window, and}

playback starts automatically.

VCD1.1

DVD

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

If playback does not start, press PLAY.

In some cases, the disc menu might appear

instead.

z Press SKIP (

) or SKIP (

) briefly during play-

back to return to the beginning of the current

chapter/track or to select the next chapter/track.

For some VCD discs, it might take 5 or 6 secs after

pressing PLAY before the playback picture appears.

^zPress SKIP (

) twice in quick successions to step

back to the previous chapter/track.

^zTo go directly to any chapter/track during playback,

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD or Video CD that contains a menu.

press DISPLAY. Then, press

to select C

(chapter) (or for a Video CD, select T for track). Then,

enter the chapter number using the numbered buttons

(0-9).

^zFor two-digit numbers, press the buttons in rapid suc-

cession.

DVD

Use / / / buttons to select the title/chapter you

want to view, then press ENTER to start playback.

Press TOP MENU or MENU to return to the menu

screen.

VCD2.0

VCD1.1

Slow Motion DVD

^zUse the number buttons to select the track you want

to view.

1 Press PAUSE/STEP during playback.

The DVD+VCR will now go into PAUSE mode.

) or SKIP (

The DVD+VCR will enter SLOW mode.

Press RETURN to return to the disc menu screen.

^zMenu setting and the exact operating procedures for

using the disc menu may differ depending on the disc.

Follow the instructions on each menu screen.

You also may set PBC to Off under setup. See page

20.

2 Press SKIP (

) during pause mode.

3 Use SKIP (

speed: 1/16,

or 1/16,

) or SKIP (

) to select the required

1/4 or 1/2 (backward),

1/4 or 1/2 (forward).

1/8,

4 To return to playback, press PLAY.

Notes

Note

z If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit password

must be entered and/or the disc must be authorized

(see Parental Control, on page 21).

Slow motion playback in reverse is not available from a

Video CD.

z DVDs may have a region code.

z Your DVD+VCR will not play discs that have a region

code different from your DVD+VCR. The region code

for this DVD+VCR is 1 (one).

z Do not keep an image or on-screen displayed for a

long time.

1-31

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD (Continued)

General Features (continued)

0:16:57

- : - - : - -

Time Search DVD

Still Picture and Frame-by-frame playback

DVD

The Time Search function allows you to start playing at

any chosen time on the disc.

VCD2.0

VCD1.1

1 Press DISPLAY during playback. The on-screen dis-

1 Press PAUSE/STEP during playback.

The DVD+VCR will now go into PAUSE mode.

2 With a DVD, you can advance the picture frame by

frame by pressing PAUSE/STEP repeatedly on the

remote control.

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 Within 10 seconds, use

to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

3 To return to playback, press PLAY.

3 Within 10 seconds, use the numbered buttons to

enter the required start time. Enter hours, minutes

and seconds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

VCD2.0

VCD1.1

Search DVD

1 Press REW or FWD for about two seconds during

playback.

The DVD+VCR will now go into SEARCH mode.

2 Press REW or FWD repeatedly to select the required

4 Within 10 seconds, press ENTER.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

speed:

or X2,

With a Video CD, the Search speed changes:

X2, X4, X8 (backward) or X2,

X8 (forward).

X2,

X4,

X16,

X100 (backward)

X4,

X16,

X100 (forward).

Selecting the sound enhancement

X4,

3D SUR

DIALOGUE

NORM.

VCD2.0

VCD1.1

DVD

1 Press DISPLAY during playback.

2 Use to select the sound icon.

The sound option will be highlighted.

3 Use to select “NORM”, “3D SUR” or

3 To return to playback, press PLAY.

VCD1.1

Random Karaoke DVD

1 Press RANDOM during playback or in stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the TV screen.

“DIALOGUE”.

2 To return to normal playback, press RANDOM until

“NORMAL” appears on the TV screen.

NORM. : Normal sound

3D SUR: This player can produce a 3D Surround effect, which

simulates multi-channel audio playback from two convention-

al stereo speakers, instead of the five or more speakers nor-

mally required to listen to multi-channel audio from a home

theater system.

DIALOGUE: Enhances critical center channel information to

make dialogue more intelligible (only when playing a DVD

video disc recorded on the Dolby Digital recording system).

• To use this enhancement on audio output from the

DIGITAL AUDIO OUT jack, be sure to set “Digital Audio

Output” to “PCM”. See page 20.

Tips

By pressing SKIP (

) or SKIP (

) during Random

playback, the unit selects another title (track) and

resumes Random playback.

Note

This function only works with DVD Karaoke discs and

video CD without PBC.

1-32

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD (Continued)

VCD2.0

VCD1.1

VCD2.0

VCD1.1

Repeat DVD

Zoom DVD

ALL

TRACK

OFF

CHAPT

TITLE

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

DVD Video Discs - Repeat Chapter/Title/Off

1 To repeat the currently playing chapter, press

REPEAT.

The Repeat Chapter icon appears on the TV screen.

2 To repeat the title currently playing, press REPEAT a

second time.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

If you press ZOOM repeatedly, the magnification level

increases up to six steps.

2 Use / / / buttons to move through the zoomed

picture.

The Repeat Title icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

3 Press CLEAR to resume normal playback or return to

the paused image.

Video CDs - Repeat Track/All/Off

Note

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

z The zoom function may not work for some DVDs.

z The zoom function may not work on multi-angle

scenes.

2 To repeat the disc currently playing, press REPEAT

two times.

The Repeat All icon appears on the TV screen.

VCD2.0

VCD1.1

DVD

Marker Search

To cancel Repeat mode, press REPEAT repeatedly until

the Repeat Off icon appears on the TV screen.

MARKER SEARCH

1/9

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

Note

z On a Video CD with PBC, you must set PBC to Off on

the setup menu to use the Repeat function.

See page 20.

z If you press SKIP (

Repeat Chapter/Track playback, the repeat playback

1 During disc playback, press MARKER when playback

reaches the spot that you want to memorize.

The Marker icon will appear on the TV screen briefly.

) twice or SKIP (

) during

cancels.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

VCD2.0

VCD1.1

Repeat A-B DVD

To Recall a Marked Scene

OFF

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

To repeat a sequence in a title:

2 Within 10 seconds, press

number that you want to recall.

to select a Marker

1 Press A-B at your chosen starting point.

A- appears briefly on the TV screen.

2 Press A-B again at your chosen end point.

A-B appears briefly on the TV screen, and the repeat

sequence begins

3 Press ENTER.

Playback will start from the Marked scene.

4 To remove the MARKER SEARCH menu, press

SEARCH.

3 To cancel the sequence, press A-B.

To clear a Marked Scene

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

2 Within 10 seconds, press

to select a Marker

number that you want to erase.

3 Press CLEAR.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

5 To remove the MARKER SEARCH menu, press

SEARCH.

1-33

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD (Continued)

Special DVD Features

ENG

DVD

Subtitles

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

Checking the contents of DVD Video

discs: Menus

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press MENU. Then,

press the appropriate number button to select an option.

Or, use / / / buttons to highlight your selection,

then press ENTER.

Note

appears, the feature is not available on the disc.

DVD

Title Menu

1 Press TOP MENU.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

3 To remove the title menu, press TOP MENU again.

DVD

Disc Menu

1 Press MENU.

The disc menu is displayed.

2 To remove the disc menu, press MENU again.

1/1

DVD

Camera Angle

If the disc contains sequences recorded from different

camera angles, the angle icon blinks on the TV screen.

You can then change the camera angle if you wish.

Press ANGLE repeatedly during playback to select a

desired angle.

The number of the current angle appears on the display.

DVD

Changing the Audio Language

ENG

5.1 CH

Press AUDIO repeatedly during playback to hear a

different audio language or audio track.

Changing the Audio Channel

RIGHT

STER.

LEFT

VCD2.0

VCD1.1

Press AUDIO repeatedly during playback to hear a dif-

ferent audio channel (STEREO, LEFT or RIGHT).

1-34

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD

Playing an Audio CD

1 Press and hold REW or FWD for about two seconds

during playback.

The player will now go into SEARCH mode.

Insert a disc and close the tray.

The menu appears on the TV screen.

2 Press REW or FWD repeatedly to select the required

Program

speed:

X4,

X2,

X8 (forward).

X4,

X8 (backward) or

X2,

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

3 Search speed and direction are indicated on the

menu screen.

Clear All

NORM.

4 To exit SEARCH mode, press PLAY.

0:56:35

STER.

Audio CD menu

Random

Press

to select a track then press PLAY.

1 Press RANDOM during playback or when playback is

2 _{Playback starts.}

stopped.

During playback, the current track’s elapsed playing

time will appear on the display window.

Playback will stop at the end of the disc.

The unit automatically begins Random Playback and

“RAND.” appears on the menu screen.

2 To return to normal playback, press RANDOM repeat-

edly until “RAND.” disappears on the menu screen.

To stop playback at any other time, press STOP.

Repeat A-B

Pause

To repeat a sequence.

1 During disc playback, press A-B at your chosen start-

ing point.

1 Press PAUSE/STEP during playback.

2 To return to playback, press PLAY or press

PAUSE/STEP again.

The Repeat icon and “A -” appears on the menu screen.

2 Press A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

Moving to another Track

^zPress SKIP (

) or SKIP (

) briefly during

playback to go to the next track or to return to the

3 To exit the sequence and return to normal play, press

A-B again.

The Repeat icon and “OFF” appear on the menu screen.

beginning of the current track.

^zPress SKIP (

) twice in quick successions to step

back to the previous track.

Selecting the sound enhancement CD

^zTo go directly to any track, enter the track number

using the numbered buttons (0-9) during playback.

1 Press DISPLAY during playback.

2 Use

to select the sound icon.

The sound option will be highlighted.

Repeat Track/All/Off

3 Use

to select “NORM.” or “3D SUR”.

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the menu screen.

NORM. : Normal sound

3D SUR: This player can produce a 3D Surround effect, which

simulates multi-channel audio playback from two convention-

al stereo speakers, instead of the five or more speakers nor-

mally required to listen to multi-channel audio from a home

theater system.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat All icon appears on the menu screen.

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the menu screen.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a dif-

ferent audio channel (STER., LEFT, or RIGHT).

Note

The REPEAT button is not available when the

mark

appears.

Press PROGRAM to disappear the

mark.

1-35

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with MP3 Disc

MP3

Playing an MP3 disc

Note

z The REPEAT button is not available when the

The DVD Player can play MP3 formatted recordings on

CD-ROM, CD-R or CD-RW discs.

Before playing MP3 recordings, read the notes on MP3

Recordings on right.

mark appear. Press PROGRAM to clear the

z If you press SKIP ( ) twice or SKIP (

mark.

) during

Repeat Track playback, the repeat playback cancels.

Insert a disc and close the tray.

The MP3/JPEG/WMA choice menu appears on the

TV screen.

Notes on MP3 Discs

About MP3

^zAn MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

^zThe player cannot read an MP3 file that has a file

extension other than “.mp3”.

MP3

JPEG

WMA

^zThe player cannot read a non MP3 encoded file that

has a file extension “.mp3”.

Press

to select the MP3 then press ENTER.

2 _{The MP3 menu appears on the TV screen.}

MP3

Program

MP3 Disc compatibility with this player is limit-

ed as follows:

1. Sampling Frequency / only at 44.1kHz

2. Bit rate / within 32 - 320kbps

TRACK 1.MP3

TRACK 2.MP3

TRACK 3.MP3

TRACK 4.MP3

TRACK 5.MP3

TRACK 6.MP3

TRACK 7.MP3

TRACK 8.MP3

Clear All

OFF

3. CD-R physical format should be “ISO 9660”

4. If you record MP3 files using the software which

cannot create a FILE SYSTEM, for example “Direct-

CD” etc., it is impossible to playback MP3 files. We

recommend that you use “Easy-CD Creator”, which

creates an ISO9660 file system.

5. A single session disc requires MP3 files in the first

track. If there is no MP3 file in the 1st track, it can-

not playback MP3 files. If you wish to playback MP3

files, format all the data in the disc or use a new

one.

6. We do not recommend using CD-RW discs. Please

use finished CD-R discs only.

7. File names should be named using 8 letters or less

and must incorporate “.mp3” extension

e.g. “********.MP3”.

56:35

MP3 menu

to select a track then press PLAY.

Press

3 _{Playback starts.}

During playback, the current track’s elapsed playing

time will appear on the display.

Playback will stop at the end of the disc.

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

To stop playback at any other time, press STOP.

MP3

Pause

1 Press PAUSE/STEP during playback.

2 To return to playback, press PLAY or press

PAUSE/STEP again.

8. Do not use special letters such as “_?!><+*}{`[@

]:;\/.,” etc.

9. Total number of files on the disc should be less than

200.

10. Use 74 minute CD-R discs (650M), Do not use 80

minute CD-R (700M) software

MP3

Moving to another Track

^zPress SKIP (

) or SKIP (

) briefly during play-

back to advance to the next track or to return to the

beginning of the current track.

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 files). That require certain pre-existing conditions

(see above) to insure compatible playback.

^zPress SKIP (

back to the previous track.

) twice in quick successions to step

MP3

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the menu screen.

2 To repeat all tracks on a disc, press REPEAT two

times.

Customers should also note that permission is

required in order to download MP3 files and music

from the Internet. TOSHIBA cannot grant such

permission. Permission should always be sought

from the copyright owner.

The Repeat All icon appears on the menu screen.

To cancel Repeat mode, press REPEAT repeatedly until

the Repeat Off icon appears on the menu screen.

1-36

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with JPEG Disc

JPEG

Moving to another File

Viewing a JPEG disc

^zPress SKIP (

) or SKIP (

) once during viewing

This DVD Player can play discs with JPEG files on it.

Make sure the resolution of the JPEG files is less than

2 mega pixels (2M).

to advance to the next file or to the previous file.

Repeat All/Off

1 To repeat all files on a disc, press REPEAT when

Notes

^zDepending upon the size and number of the JPEG

files, it could take a long time for the DVD player to

read the disc’s contents. If you don’t see an on-

screen display after several minutes, some of the files

are too big — reduce the resolution of the JPEG files

to less than 2 mega pixels and burn another disc.

JPEG menu appears.

The Repeat All icon appears on the menu screen.

2 Press PLAY or ENTER to start repeat playback.

3 To cancel Repeat mode, first press STOP to stop

playback then press REPEAT when JPEG menu

appears.

^zTotal number of files on the disc should be less than

200.

The Repeat Off icon appears on the menu screen.

^zSome discs/files may be incompatible due to different

recording format or condition of discs/files.

Note

The REPEAT button is not available when the

mark

appear. Press PROGRAM to clear the

mark.

1 Insert a disc and close the tray.

The MP3/JPEG/WMA choice menu appears on the

TV screen.

Notes on JPEG Files

MP3

JPEG

WMA

z When you are using software such as “Easy CD

Creator” to burn the jpeg files into the CD-R, ensure

that all the selected files have the “.jpg” extensions

when copying into the CD layout.

Press

to select the JPEG then press

2 _ENTER.

z If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

The JPEG menu appears on the TV screen.

Press RETURN to move to the previous menu

(MP3/JPEG/WMA choice menu).

z File names without “.jpg” extension will not be able to

be read by this DVD+VCR. Even though the files are

shown as JPEG image files in windows explorer.

JPEG

Program

Picture1.jpg

Picture2.jpg

Picture3.jpg

Picture4.jpg

Picture5.jpg

Picture6.jpg

Picture7.jpg

Picture8.jpg

Clear All

Slide Speed Fast

1/31

OFF

JPEG menu

If you want to view a particular file, press

3 _{highlight a file and press ENTER or PLAY.}

Viewing the file proceeding starts.

During viewing a file, press DISPLAY or RETURN

to move to the previous menu (JPEG menu).

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

Tip

There are three viewing Slide Speed options: Fast,

Normal, and Slow. Press

Speed then press to select the option you want to

use, and press ENTER.

to highlight the Slide

To stop viewing at any other time, press STOP.

4 _{The JPEG menu appears.}

1-37

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with WMA Disc

WMA

Playing an WMA disc

Note

z The REPEAT button is not available when the

The DVD Player can play WMA formatted recordings on

CD-ROM, CD-R or CD-RW discs.

mark appear. Press PROGRAM to clear the

z If you press SKIP ( ) twice or SKIP (

mark.

) during

Insert a disc and close the tray.

The MP3/JPEG/WMA choice menu appears on the

TV screen.

Repeat Track playback, the repeat playback will be

canceled.

WMA Disc compatibility with this player is

limited as follows:

1. Sampling Frequency / within 32 - 44kHz

2. Bit rate / within 48 - 80kbps

MP3

JPEG

WMA

Press

to select the WMA then press ENTER.

2 _{The WMA menu appears on the TV screen.}

WMA

Program

TRACK 1.WMA

TRACK 2.WMA

TRACK 3.WMA

TRACK 4.WMA

TRACK 5.WMA

TRACK 6.WMA

TRACK 7.WMA

TRACK 8.WMA

Clear All

OFF

56:35

WMA menu

to select a track then press PLAY.

Press

3 _{Playback starts.}

During playback, the current track’s elapsed playing

time will appear on the display.

Playback will stop at the end of the disc.

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

To stop playback at any other time, press STOP.

WMA

Pause

1 Press PAUSE/STEP during playback.

2 To return to playback, press PLAY or press

PAUSE/STEP again.

WMA

Moving to another Track

^zPress SKIP (

) or SKIP (

) briefly during play-

back to advance to the next track or to return to the

beginning of the current track.

^zPress SKIP (

) twice in quick successions to step

back to the previous track.

WMA

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the menu screen.

2 To repeat all tracks on a disc, press REPEAT two

times.

The Repeat All icon appears on the menu screen.

To cancel Repeat mode, press REPEAT repeatedly until

the Repeat Off icon appears on the menu screen.

1-38

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

Programmed Playback

MP3

JPEG

WMA

Programmed Playback with

Audio CD, MP3, JPEG and WMA

Programmed Playback with

Video CD

VCD2.0

VCD1.1

MP3

JPEG

WMA

Disc

Note

Program allows you to store your favorite tracks

(or files) for a particular disc in the player memory.

Program can contain 32 tracks (Audio CD/Video CD) or

60 tracks (MP3/JPEG/WMA disc).

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Program function. See page 20.

Insert Video CD and close the tray.

Insert a disc and close the tray.

• The Audio CD menu appears.

• If MP3, JPEG or WMA disc is inserted, the

MP3/JPEG/WMA choice menu appears on the TV

screen.

Press PROGRAM while playback is stopped.

The VCD Program menu will appear.

VCD

Program

Press

to select the MP3, JPEG or WMA then

TRACK 1

press ENTER. The MP3, JPEG or WMA menu

appears on the TV screen. Press RETURN to

move to the previous menu (MP3/JPEG/WMA

choice menu).

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

Clear All

Press PROGRAM in the stop mode or during

2 _{playback (Audio CD, MP3 and WMA only) to}

enter the Program Edit mode.

Note

The

mark will appear to the right of the word Program

Press RETURN or PROGRAM to exit the Program menu.

on the right side of the menu screen.

Follow steps 3-7 of “Programmed Playback with

3 _{Audio CD, MP3, JPEG or WMA Disc” on left.}

Note

Press PROGRAM to exit the Program Edit mode;

the

mark will disappear.

Tip

To resume normal playback from programmed

playback

Press and hold PROGRAM for 3 seconds until “PROG.”

indicator disappears in the display window.

Press

to select a track/file then press

3 _{ENTER to place the selected track/file on the}

Program list.

Repeat step 3 to place additional tracks/files on

4 _{the Program list.}

Program

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

Clear All

NORM.

0:56:35

STER.

For example: Audio CD menu

Press

The programmed track/file you selected last is highlighted

on the program list.

Press

to select the track/file you want to

6 _{start playing.}

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

Press ENTER or PLAY to start.

Playback begins in the order in which you programmed the

tracks/files and “PROG.” appears in the display window.

Playback stops after playing the last programmed track/file

on the program list.

Note

The programmed tracks/files are cleared when the

power is turned off or the disc is removed.

1-39

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmed Playback (Continued)

Repeat Programmed Tracks/All/Off

MP3

WMA

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the menu screen.

2 To repeat all tracks on the program list, press

REPEAT two times.

The Repeat All icon appears on the menu screen.

3 To cancel Repeat mode, press REPEAT repeatedly

until the Repeat Off icon appears on the menu

screen.

Note

If you press SKIP (

) twice or SKIP (

) during

Repeat Track playback, the repeat playback cancels.

JPEG

Repeat Programmed All/Off

1 To repeat all files on the program list, press REPEAT

when JPEG menu appears.

The Repeat All icon appears on the menu screen.

2 Press PLAY or ENTER to start repeat playback.

3 To cancel Repeat mode, first press STOP to stop

playback then press REPEAT when JPEG menu

appears.

Note

The REPEAT button is not available when the

mark

appear. Press PROGRAM to clear the

mark.

Erasing a Track/File from Program List

1 Press PROGRAM during playback or in the stop

mode to enter the Program Edit mode.

The

mark will appear.

Note

JPEG can be programmed only in stop mode (when

menu screen is displayed.)

2 Press to move to the Program list.

3 Use

to select the track/file that you wish to erase

from the Program list.

4 Press CLEAR.

The track/file will be erased from the Program list.

Erasing the Complete Program List

1 Follow steps 1-2 of “Erasing a Track/File from

Program List” as above.

2 Use

to select “Clear All”, then press ENTER.

The complete Program for the disc will be erased.

The programs are also cleared when the disc is removed.

1-40

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information - DVD Part

One Touch Replay

Press INSTANT REPLAY during playback and the disc

will reverse picture search through 10 seconds of play-

back. And then the playback will start from the point

again.

Screen Saver

A screen saver image appears when you leave the DVD

Player in stop mode for about five minutes.

VCD2.0

VCD1.1

Video Mode Setting DVD

^zWith certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.

^zTo change the video mode, press and hold DISPLAY

about 3 seconds during disc playback. The new video

mode number selected is displayed on the TV screen.

Check whether the video quality has improved. If not,

repeat the above procedure until picture quality is

improved.

^zVideo mode sequence:

Video1 → Video2 → Film → Adapt → Auto.

^zIf you turn off the power, the video mode will return to

initial default state (Auto).

Detailed Description of each Video Mode

Auto : The source material of the DVD video (film material or

video material) is determined from disc information.

Video1 : Suitable for playing video based content with

comparatively little motion.

Video2 : Suitable for playing video based content with

comparatively more motion.

Film : Suitable for playing film based content or video based

material recorded by the progressive scan method.

Adapt : Determines the appropriate mode (film or video)

during disc playback, and automatically selects the proper

mode. Suitable for playing a disc comprised of film and

video based content.

1-41

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

z The power cord is disconnected.

z Plug the power cord into the wall outlet

securely.

z No disc is inserted.

z No tape is inserted.

z Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The power is on, but

the DVD+VCR does not

work.

z The TV is not set to receive DVD+VCR

signal output.

z Select the appropriate video input mode

on the TV so the picture from the

No picture.

DVD+VCR appears on the TV screen.

z TV/VCR mode for DVD+VCR is set to

TV.

z Press the TV/VCR button on the remote

control repeatedly to choose VCR

mode. TV indicator disappears in the

display window.

z The video cable is not connected

z Connect the video cable securely.

securely.

z The connected TV power is turned off.

z Turn on the TV.

No sound.

z The equipment connected with the

audio cable is not set to receive

DVD+VCR signal output.

z Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD+VCR.

z The audio cables are not connected

z Connect the audio cable securely.

securely.

z The power of the equipment connected

with the audio cable is turned off.

z Turn on the equipment connected with

the audio cable.

z The Digital Audio Output is set to the

wrong position.

z Set the Digital Audio Output to the

correct position, then turn on the

DVD+VCR again by pressing POWER.

The playback picture is z The disc is dirty.

z Clean the disc.

poor.

z Tape heads are dirty.

z Clean video heads.

z Tape is a rental or was recorded on

another VCR.

z Use CH/TRK (+/-) for manual tracking

adjustment while tape is playing.

z No disc is inserted.

z No tape is inserted.

z Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The DVD+VCR does

not start playback.

z An unplayable disc is inserted.

z Insert a playable disc. (Check the disc

type, color system, and Regional code.)

z The disc is placed upside down.

Place the disc with the playback side down.

z The disc is not placed within the guide.

z Place the disc on the disc tray correctly

inside the guide.

z The disc is dirty.

z Clean the disc.

z The Rating level is set.

z Cancel the Rating function or change

the rating level.

The remote control

does not work properly.

z The remote control is not pointed at the

remote sensor of the DVD+VCR.

z Point the remote control at the remote

sensor of the DVD+VCR.

z The remote control is too far from the

DVD+VCR.

z Operate the remote control within 23 ft

(7 m).

z There is an obstacle in the path of the

z Remove the obstacle.

remote control and the DVD+VCR.

z The batteries in the remote control are

z Replace the batteries with new ones.

exhausted.

z This remote control use the same

buttons for VCR and DVD functions

(ex. PLAY).

z When using a VCR, first press the VCR

button. When using a DVD, first press

the DVD button.

1-42

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Continued)

Cause

Correction

Symptom

z Those channels were deleted with the

CH. ADD/DEL option.

z Use CH. ADD/DEL. to restore channels.

See “Channel Selection” on page 16.

Some channels are

skipped over when

using CH/TRK (+/-)

z Antenna or cables are loose.

z Tighten connections or replace cable.

Picture and sound of

broadcasting channel

are weak or missing.

z Wrong TUNING BAND option is being

used.

z Try all TUNING BAND options. See

“Channel Selection” on page 16 for

details.

z Camcorder is off.

z Turn camcorder on and operate

properly.

Camcorder image is not

shown.

z DVD+VCR SOURCE SELECT is not set z Press INPUT SELECT to select LINE

Camcorder image via

A/V input to DVD+VCR

is not shown on TV

screen.

to LINE1 or LINE2.

input channel (LINE1 or LINE2).

z Clock in DVD+VCR is not set to correct

time.

z Set clock to correct time. See “Setting

the Clock” on page 17.

Timer recording is not

possible.

z Timer has been programmed

incorrectly.

z Reprogram Timer. See “Timer

Recording” on page 24.

z TIMER indicator does not appear after

z Reprogram Timer

programming timer.

z DVD+VCR is in Timer Recording mode. z This is the normal indication that the

TIMER indicator

appears after DVD+VCR

is turned off.

DVD+VCR is in TIMER mode.

Stereo Audio Record

and/or Playback is not

present.

z TV is not Stereo-compatible.

z No action is possible.

z Broadcast program is not in stereo for-

mat.

z No action is possible.

z DVD+VCR A/V Out jacks are not con-

nected to TV A/V In jacks.

z Make A/V connections. Stereo is

available only via A/V output from

DVD+VCR.

z DVD+VCR Audio/Video Out is not

z Select AUX or A/V source as TV input.

selected for viewing at the TV.

z DVD+VCR BROADCAST TYPE mode is z Set BROADCAST TYPE mode to

set to SAP or MONO.

STEREO. See “Setting the VCR Setup

Menu” on page 16.

Moisture Condensation

In locations where moisture condensation may occur:

Moisture condensation can occur:

• When the DVD+VCR is moved from a cold place to a

warm place.

•

Keep the DVD+VCR plugged into an AC power outlet

with POWER On. This will help prevent condensation.

• Under extremely humid conditions.

• When condensation has occurred, wait a few hours

for the DVD+VCR to dry before using it.

1-43

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 19).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Amharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Romanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faeroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

1-44

Download from Www.Somanuals.com. All Manuals Search And Download.

Country/Area Code List

Enter the appropriate code number for the initial setting “Area Code” (See page 21).

Code Country/Area

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Monaco

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern

Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Australia

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich

Isls.

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Hong Kong

Heard and McDonald

Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Ukraine

Uganda

United Kingdom

USA Minor Outlying

Islands

United States

Uruguay

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Jordan

Japan

Kenya

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Lebanon

1-45

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

AC 120V , 60 Hz

Power consumption

Dimensions (approx.)

Mass (approx.)

Operating temperature

Operating humidity

Signal system

23W

430 X 97.5 X 293 mm (16.9 x 3.9 x 11.5 inches) (w x h x d)

4.8 kg (10.58 lbs)

5˚C to 40˚C (41˚F to 104˚F)

5 % to 90 %

NTSC

Inputs

ANTENNA IN

Antenna or CATV input, 75 ohms

VHS VIDEO IN (LINE1, 2)

VHS AUDIO IN (LINE1, 2)

1 Vp-p 75 ohms, sync negative, RCA jack x 2

-6.0 dBm more than 47 kohms, RCA jack (L, R) x 2

Outputs

VIDEO OUT

1 Vp-p 75 ohms, sync negative

S-VIDEO OUT

(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1

COMPONENT VIDEO OUT

(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2

0.5 V (p-p), 75 ohms, RCA jack x 1

5 V (p-p), 75 Ω, Optical connector x 1

2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1

Channel 3 or 4

Audio output (digital audio)

Audio output (optical audio)

Audio output (analog audio)

RF OUT

VCR Specifications

Head system

Timer

Tape speed

Four head helical scan azimuth system

12-hour display type with AM, PM

SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec

12.7 mm

Tape width

Maximum recording time

Rewind time

SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)

About 3 minutes (T-120)

Antenna

75 ohms (VHF/UHF)

VHF output signal

Channel coverage

Frequency range

Signal-to-noise ratio

Dynamic range

Channel separation

Channel 3 or 4 (Switchable)

VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)

20Hz to 20kHz

More than 43dB

More than 88 dB

More than 60 dB

DVD Specifications

Laser system

Frequency response

Semiconductor laser, wavelength 650 nm

DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100dB (ANALOG OUT jacks only)

Less than 0.008%

More than 95 dB (DVD/CD)

Accessory:

Video cable x 1, Audio cable x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries(AAA) x 2

^zDesign and specifications are subject to change without notice.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

1-46

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY DVD VIDEO PLAYER

Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the follow-

ing limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the orig-

inal purchaser and to no other purchaser or transferee.

Limited Ninety (90) Day Warranty

Commercial Units

TACP/THI warrant this product against defects in materials or

workmanship for a period of ninety (90) days after the date of

original retail purchase. During this period, TACP/ THI will

repair or replace a defective product or part, at their option,

with a new or refurbished product or part without charge to

you. You must deliver the entire product to a TACP/THI

Authorized Service Station. You are responsible for all trans-

portation and insurance charges for the unit to and from the

Authorized Service Station. If you live in the

U.S.A. you may, at your option, return your DVD Unit to:

Toshiba America Consumer Products Inc.

Products sold and used for commercial use have a limited

ninety (90) day warranty for all parts and labor.

Owner’s Manual

You should read the owner’s manual thoroughly before operat-

ing this product. You should complete and mail the enclosed

Demographic card within ten (10) days after you, or the person

who has given you this product as a gift, purchased this prod-

uct. This is one way to enable TACP to provide you with better

customer service and improved products. Failure to return the

card will not affect your rights under this warranty.

Returns Center

1420C Toshiba Dr.

Your Responsibility

Lebanon, TN 37087

The above warranties are subject to the following conditions:

(1) You must retain your bill of sale or provide other proof of

purchase.

(2) You must notify a TACP/THI/TCL /Authorized Service

Station within thirty (30) days after you discover a defective

product or part.

Upon receipt we will, at our option, exchange the DVD Unit

with a new or refurbished unit. Canadian consumers are

requested to contact TCL. In Hawaii consumers are

requested to contact THI.

Limited One (1) Year Warranty

(3) All warranty servicing of this product must be made by a

TACP/THI/TCL Authorized Service Station.

(4) U.S.A. warranties are effective only if the product is pur-

chased and operated in the Continental U.S.A. or Puerto

Rico.

TACP/THI further warrant the parts in this product against

defects in materials or workmanship for a period of one (1)

year after the date of original retail purchase. During this peri-

od, TACP/THI will repair or replace a defective product or part,

at their option, with a new or refurbished product or part with-

out charge to you, except that if a defective part is replaced

after ninety (90) days from the date of the original retail pur-

chase you pay labor charges involved in the replacement. You

must also deliver the entire product to a TACP/THI Authorized

Service Station. You are responsible for all transportation and

insurance charges for the unit to and from the Authorized

Service Station. If you live in the U.S.A. you may, at your

option, return your DVD Unit to:

(5) Labor service charges for set installation. Set up, adjust-

ment of customer controls and installation or repair of

antenna systems are not covered by this warranty.

Reception problems caused by inadequate antenna sys-

tems are your responsibility.

(6) Warranties extend only to defects in materials or workman-

ship as limited above and do not extend to any product or

parts which have been lost or discarded by you or to dam-

age to products or parts caused by misuse, accident, dam-

age caused by Acts of God, such as lighting or fluctuations

in electric power, improper installation, improper mainte-

nance or use in violation of instructions furnished by us; or

to units which have been altered or modified without autho-

rization of TACP/THI/TCL or to damage to products or part

thereof which have had the serial number removed,

altered, defaced or rendered illegible.

Toshiba America Consumer Products Inc.

Returns Center

1420C Toshiba Dr.

Lebanon, TN 37087

Upon receipt we will, at our option, exchange the DVD Unit

with a new or refurbished unit. Canadian Consumers are

requested to contact TCL. In Hawaii consumers are

requested to contact THI.

(7) Should you elect to return your DVD Unit to TACP after the

ninety (90) days and within one (1) year, or after the war-

ranty period has expired: Call (800)-631-3811 to receive

information concerning an exchange price. Payment must

be enclosed with product in the form of a certified check or

money order including reason for return.

Rental Units

The warranty for rental units begin with the first rental or thirty

(30) days from the date of shipment to the rental firm, whichev-

er comes first.

(8) Physically damaged DVD Units are not acceptable for

repair or exchange whether in or out of warranty and will

be returned as received.

(Continued)

1-47

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY DVD VIDEO PLAYER (Continued)

How to Obtain Warranty Service

(1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem.

(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days

after you find a defective product or part.

(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center. Products

shipped to the Service Station must be insured and safely and securely packed, preferably in the original shipping carton,

and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be enclosed.

In the Continental United States contact: In Hawaii contact:

Toshiba Hawaii Inc.

In Canada contact:

Consumer Electronics Group

191 McNabb Street

Markham, Ontario L3R 8H2

(905)-470-5400

Consumer Electronics Group

22171 Fraserwood Way

Richmond, B.C. V6W 1J5

(604)-303-2500

327 Kamakee Street

Honolulu, HA 96814

(808)-521-5377

Toll Free

800-631-3811

Consumer Electronics Group

1643 North Service Road

Droval, QC H9P 1J1

(514)-856-4100

All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are

expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law

as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar oblig-

ations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for

consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any

manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising under the

warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date

you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law.

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states

do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of inci-

dental or consequential damages, so the above provisions may not apply to you.

ATTENTION CANADIAN CONSUMERS:

Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward this

completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product must be

purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not covered by

these warranties.

IMPORTANT: PACKING AND SHIPPING INSTRUCTION

When you send the product to a Service Station, you must use the original carton box and packing material, then insert the

original carton box containing the unit into another carton using more packing material.

1-48

Download from Www.Somanuals.com. All Manuals Search And Download.

Toshiba Automobile Parts LF516 User Manual
TP Link Network Router TL WR542G User Manual
TRENDnet Security Camera TVIP651WI User Manual
Triax TV Receiver C HD415 CX User Manual
Tricity Bendix Cooktop SIE531 User Manual
Ultra Products Power Supply ULT31646 User Manual
Vandersteen Audio Home Theater System 2WQ User Manual
ViewSonic Flat Panel Television N3251w User Manual
ViewSonic Flat Panel Television VS11620 1M User Manual
Vita Mix Blender The Quiet One User Manual