Toshiba TV Antenna 23L1400UC User Manual

QUICK START  
23L1400UC (Canada model)  
L1400UC Series  
Pedestal Assembly Instructions  
To prevent possible electric shock, protect the power cord  
from being pinched when attaching the pedestal stand.  
Extreme care should always be used when attaching the  
pedestal stand to avoid damage to the LCD panel.  
For safety information, please review the User’s Guide online:  
Before beginning pedestal assembly, carefully lay the front of  
the LCD Panel face down on a flat, cushioned surface such as a  
quilt or blanket. Leave the bottom of the unit protruding over the  
edge of the surface and assemble pedestal as indicated below.  
Unpack the box  
The Resource Guide contains important safety precautions not included in this  
document. Please review completely prior to using this product. Complete  
instructions are contained in the User's Guide located on Toshiba's web site at :  
1. Remove the components and TV from  
the box. Save the packing materials in  
case you need them later.  
Two people are required for installation to avoid injury or  
damage to the TV.  
2. Remove the documentation for  
important information.  
A High-Definition signal is needed to receive a High-Definition picture.  
Once you have a High-Definition signal you need to connect it to a  
High-Definition input on your TV. Not all channels are currently  
broadcasting in HD. Standard analog TV channels and HD channels, even  
on the same network, broadcast on different channels. (Example: ABC  
analog may be on channel 4, while ABC-HD may be on channel 104.)  
Notice  
Subject to Change.  
Product specifications, configurations, prices,  
system/component/options availability are all  
subject to change without notice.  
23 L1400UC  
23 L1400UC  
23 L1400UC  
B
C
x 1  
x 1  
x 6 (23L1400UC)  
M4 ; L12mm  
Check the components  
the Limited One (1)Year Warranty on Parts  
and Labour can be found at  
www.toshiba.ca/support Click on Televisions,  
Select Warranty, then Select Standard Warranty  
& Service Plans and Select Flat Panel  
Television (bilingual)  
Get detailed product information:  
For up-to-date product information,  
For detailed product specifications,  
Select Product, then select Model  
and select Model Number.  
Your TV comes with:  
• Remote control and batteries  
• Resource Guide.  
• Pedestal stand and hardware  
• All other cables and adapters are sold  
separately.  
23L1400UC model  
• If any items are missing or damaged, notify  
your dealer immediately.  
• For Canada, the terms and conditions of  
Choosing a location for your LED TV  
To display your TV on the included Pedestal Stand:  
To display your TV using a Wall Bracket:  
Observe the following safety precautions:  
Be sure to remove the pedestal stand before mounting your TV with a  
wall bracket. Always use a wall bracket Listed by an independent  
laboratory (such as UL, CSA, ETL) that is appropriate for the size and  
weight of the TV:  
1. Read and follow the pedestal assembly instructions section in this document  
Before beginning pedestal assembly, carefully lay the TV facedown on a  
flat, cushioned surface such as a quilt or blanket. Leave the bottom of the  
unit protruding over the edge of the surface and assemble the pedestal as  
indicated below.  
Extreme care should always be used when attaching or removing the pedestal  
stand to avoid damage to the display panel.  
2. Assemble the pedestal stand with the hardware provided.  
3. After assembling the pedestal, place the TV on a sturdy, level surface that can  
support the weight of the TV.  
Two people are required for installation to avoid injury or  
damage to the TV.  
1. Unplug and remove any cables and/or other component connectors  
from the rear of the TV.  
2. Follow the instructions provided with your wall bracket. Before  
proceeding, make sure the appropriate bracket(s) are attached to the  
wall and the back of the TV as described in the instructions provided  
with the wall bracket.  
4. Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure.  
Register Your Toshiba Television  
Always place the TV on a sturdy, level, stable surface that can support  
the weight of the unit. Secure the TV with a mounting screw.  
• Place the TV on a sturdy surface that has a sufficient  
thickness and screw the unit to the surface securely by using a  
mounting screw and the fall-prevention screw hole. (Mounting screw  
not included)  
Always use the screws supplied or recommended by  
the wall mount manufacturer.  
Enhance your ownership experience by taking a few minutes to register your Toshiba product at  
support.toshiba.ca/warranty/ (for L1400UC series). Completing product registration allows Toshiba to provide you  
with product information updates, special offers and promotions. Failure to complete product registration will not diminish  
your rights under the Standard Limited Warranty.  
VESA Mounting Pattern  
TV Size  
Hole Pattern (H x V)  
Screw Size  
23"  
100mm x 100mm  
M4  
23” TV  
VESA Mounting Pattern  
If you are experiencing a technical problem or have questions regarding operation, authorized service centers,  
warranty or parts, please contact our Customer Support Center at:  
For L1400UC series (Canada model):  
1-800-268-3404 From within Canada  
Many questions regarding parts, service, and warranties can be answered by visiting the Customer  
Support Section of our website:  
Two stand screws  
(Sample illustration)  
THANK YOU  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving an HDTV Signal  
There are three basic ways to receive an HDTV signal on your new TV:  
Quick Tour  
Back  
Front  
1. Over-the-Air (Antenna)  
2. Cable or Phone Company HDTV Service  
3. Satellite  
Connect a high quality outside antenna (not  
supplied) directly to the antenna input on  
the TV (reception cannot be guaranteed and  
is based on proximity to the local signal).  
Cable or phone company HDTV service customers  
will need to subscribe to High-Definition service from  
your local provider. (Additional monthly subscription  
cost may apply).  
Satellite customers will need a High-Definition  
satellite receiver and appropriate dish hardware.  
(Additional monthly subscription cost may apply).  
Connecting to a High-Definition Input on your TV  
You can connect directly from an antenna, or if you are using an HD cable box or HD satellite box, there are three standard connections that can be used to receive an HD signal.  
1. Antenna Input  
2. HDMI® to HDMI®  
3. DVI to HDMI®  
4. Component Video Input  
TM  
To connect directly from  
an antenna or basic cable:  
connect the cable directly  
to the antenna input on the  
back of the TV.  
HDMI® is the best connection  
for HDTV. This is a digital  
connection that carries both  
digital video and digital audio.  
Your HD cable box or HD satellite receiver  
may have a DVI connection. This will be  
connected to the HDMI® jack on the TV using an  
HDMI® cable and an HDMI® to DVI converter.  
DVI carries digital video only.  
ColorStream HD component may also be used  
to receive HDTV. Use if no HDMI® or DVI jack  
is available. There are three jacks color-coded  
with red-green-blue on the back of the TV and  
HD cable box or HD satellite receiver. This  
connection will require a separate analog audio  
connection (use the red and white audio  
connections).  
Remote sensor  
Power On/Standby LED  
INPUT  
TV  
INPUT  
TV  
OUTPUT  
Cable box/Satellite box  
OUTPUT  
Cable box/Satellite box  
INPUT  
TV  
INPUT  
TV  
OUTPUT  
Cable box/Satellite box  
Left side  
POWER button  
Initial Setup  
You must select a Language, either Home/Store mode, before you can exit out of the Setup Menu. The EXIT button will not function until these selections have  
been made.  
Channel / Volume increase/  
decrease  
1. Menu Language  
Select a language.  
2. Time Zone  
Select a time zone  
Press ENTER.  
3. Store / Home Mode  
Select Store or Home Mode.  
Press ENTER.  
4. ANT/CABLE in  
Select Antenna or Cable.  
Press ENTER.  
Switches the function of the VOL +/- buttons  
to select the volume, channel, or input mode.  
Initial Setup  
Initial Setup  
Store / Home Mode  
ANT / CABLE in  
Antenna  
Menu Language  
Time Zone  
English  
Eastern  
Menu Language  
Time Zone  
English  
Eastern  
To use this TV for display in a store showroom, please select [ Store ].  
[ Home ] mode is recommended for normal use.  
Home  
USB port  
If you want to stop scanning,  
press EXIT while scanning.  
5. Start Scan  
Select Start Scan.  
Press ENTER.  
For more information about the CH/INPUT button,  
refer to the User's Guide.  
Channel Program  
Press EXIT for no change.  
Start Scan  
Most problems are easy to correct. Save time with one of these simple  
solutions  
Need Help?  
Call Toshiba Customer Support Center  
Consult the electronic User's Guide  
L1400UC series: To access the electronic User’s Guide please  
visit www.toshiba.ca/support/ceg  
If you are experiencing a technical problem or have questions  
with regards to operation, authorized service centers,  
warranty or parts, Toshiba Customer Support Center is ready  
to help.  
Navigating the menu system  
Picture  
You can use the buttons on the remote control to access  
and navigate your TV’s onscreen menu system.  
• Press MENU to open the menu system.  
Picture  
L1400UC series1: -800-268-3404 From within Canada  
• When a menu is opened, use the arrow buttons (  
on the remote control, to move in the corresponding  
direction in the menu.  
)
Picture Mode  
Reset  
Standard  
ColorStream is a trademark of Toshiba America Information Systems, Inc.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks  
or registered trademarks of HDMI Licensing LLC in the United States and other countries.  
All other brand and product names are trademarks or registered trademarks of their respective  
companies.  
Visit Toshiba's Support Web site  
Sound  
Backlight  
55  
95  
0
Contrast  
Options  
Brightness  
Color  
• Press ENTER to save your menu settings or select a  
highlighted item. (A highlighted menu item appears in a  
different color in the menu).  
Installation  
0
Printed on recycled paper  
Tint  
0
Sharpness  
Advanced Picture Setting  
Display Setting  
0
Timers  
Get Help  
• All menus close automatically if you do not make a  
selection within 60 seconds.  
• To close a menu instantly, press EXIT.  
(Sample Image)  
© 2014 Toshiba America Information Systems, Inc. • HF6RO23000I • 2/14  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technika Flat Panel Television LCD19 919 User Manual
Telex Dollhouse sc 600 User Manual
Timex Flat Panel Television T205 User Manual
Top Innovations Electric Steamer SF 680 User Manual
Toshiba Network Card T1 User Manual
Triarch Fan CF 31430 User Manual
VDO Dayton TV Receiver TV 5200 User Manual
VocoPro Microphone UHF 6800 User Manual
VTech Cordless Telephone DS6211 User Manual
Vulcan Hart Charcoal Grill VCB25M ML 44963Z User Manual